WEATHER TEC AGRICULTURAL PRODUCTS
|
|
- Sandra Craig
- 6 years ago
- Views:
Transcription
1 Catalog
2
3 Stainless Steel Fulcrum Pin Stainless Steel Spring Tapered Brass Nozzle T-Ring Bearing Exclusive Stainless Steel Spindle Lever Hood Double Bridge Construction Wide Impact Area Skirted Head Stainless Steel Bearing Spring Long Wearing Bearing Seal DOUBLE-BRIDGE CONSTRUCTION designed to give maximum strength to the head and minimize lever/fulcrum pin misalignment. SKIRTED HEAD for extra strength and to provide a positive machined upper-bearing seal-surface. ENGINEERED WATER PASSAGE individually designed to produce the optimum hydraulic cross-section for each given head. Significantly reduces internal turbulence to insure quality water stream, for precise application and uniformity. TAPERED BRASS NOZZLES with smooth micro finish bore provides maximum sprinkler diameter and superior sprinkler performance. A variety of nozzles are available for most sprinkler models. A wide selection of low angle and special-purpose nozzles in the industry offers the system designer the greatest degree of flexibility and efficiency of design. POSITIVE DRIVE LEVER with a deep-channel, I-beam construction and wide-impact area for durability and extended wear on impact surfaces. The lever hood acts as a dust cover to prohibit lever-bearing-surface contamination. STAINLESS STEEL FULCRUM PIN and SPRINGS extend component life. Corrosion and wear are minimized. EXCLUSIVE STAINLESS STEEL SPINDLE insures longer wear, greater structural integrity, and significantly improved pressure-friction-loss characteristics. T-RING BEARINGS are designed to provide maximum life expectancy and consistent speed of rotation. Individual models are equipped with the best bearing assemblies for their intended application. No attempt is made to force a single standard bearing type into all applications. All bearings contain replaceable seals and are interchangeable, size by size, throughout the product line. 100% FACTORY WATER TESTED to insure that all Weather-Tec Sprinklers will yield optimum performance for years to come. 1
4 Basic Unit Numbers The Weather-Tec sprinkler or unit numbers are composed of a prefix number, followed by a dash and a suffix number. The prefix number identifies the basic type of equipment. The suffix number identifies the unit. Prefix No. Series Unit Type Description Examples 50- Impact Lever Type, One Piece Stainless Steel G50-7, G50-11, G50-15 G50-23 Tube 10- Impact Lever Type Full Circle 10-02, 10-03, 10-10, 10-20, 10-30, 10-67, Impact Lever Type Part Circle 15-20, 15-30, 15-67, Spindle Extractor 65-20, 65-30, 65-60, Variation Letters To be added at end of the model number A = Adjustable Nozzle with Stream Break-Up Screw B = Baffle Nozzle with Adjustable Distance-Control Baffle D = Dual Nozzle F = Female FC = Flow Control Nozzle G = Standard Brass Bearing J = With Bellow K = Sealed Bearing without Spring Cover L = Low Angle LC = MP = Locking Collars Multi-Pressure Nozzle P = Plastic Bearing S = 3/8 24 th Nozzle T = Teflon Washers V = Wedge Lever ¾ = To show ¾ Male Base on a sprinkler that normally has a ½ Male Base Test Procedure for Catalog Performance Tables All sprinklers were tested under minimum wind conditions. The water pressure readings were taken below the sprinkler inlet to provide meaningful design data. All pressure readings recorded are accurate to within 2% of actual pressure. The recorded flow rate (in U.S. gallons per minute) is accurate to within 1% of actual flow. Diameters are rounded to the nearest foot. The information printed in this catalog is the average of the performance of a number of inventory samples. 2
5 ½ Impact Sprinklers Full Circle G50-23 (Plastic Series) Full circle impact - 23 trajectory ½ Male N.P.T. Single Nozzle Plastic bearing Plastic head and Die-cast lever for strength, longevity and consistent performance Continuous stainless steel water passage from bearing inlet to nozzle discharge for unobstructed flow Exclusive Quick Change Bearing Unique construction reduces theft potential Accepts standard straight bore, high uniformity and flow control nozzles T-Ring style bearing for proven dependability G50-23 Nozzle Performance Nozzle 5/64 3/32 7/64 1/8 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM G50-23 Nozzle Performance Nozzle 9/64 5/32 11/64 3/16 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM
6 ½ Impact Sprinklers Full Circle G50-23V (Plastic Series) Full circle impact 23 trajectory (Wedge Drive) ½ Male N.P.T. Single Nozzle Plastic bearing Plastic head and Die-cast lever for strength, longevity and consistent performance Continuous stainless steel water passage from bearing inlet to nozzle discharge for unobstructed flow Exclusive Quick Change Bearing Unique construction reduces theft potential Accepts standard straight bore, high uniformity and flow control nozzles Improved wedge design for more uniform coverage and rotation speed Double bridge lever construction for added strength and protection of wedge alignment New design allows micro sprinkler flow rates T-Ring style bearing for proven dependability G50-23V Nozzle #55 1/16 5/64 3/32 7/64 1/8 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
7 ½ Impact Sprinklers Full Circle G50-LA (Plastic Series) Full circle impact - available with 7 or 15 trajectory (Low Angle) ½ Male N.P.T. Single Nozzle Plastic bearing standard or brass bearing optional ½ & ¾ Plastic head with die cast lever for strength, longevity and consistent performance Continuous stainless steel water passage from bearing inlet to nozzle discharge for unobstructed flow Exclusive Quick Change Bearing Unique construction reduces theft potential Accepts standard straight bore, high uniformity and flow control nozzles T-Ring style bearing for proven dependability G50-7 Nozzle Performance Nozzle 5/64 3/32 7/64 1/8 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM G50-15 Nozzle Performance Nozzle 5/64 3/32 7/64 1/8 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM
8 ½ Impact Sprinklers Full Circle G50-LAV-7 Nozzle Performance G50-LAV (Plastic Series) Full Circle Impact -Low angle-available with 7 or 15 trajectory (Low Angle Wedge Drive) ½ Male N.P.T. - Single Nozzle Plastic bearing standard or brass bearing optional ½ & ¾ Plastic head with die cast lever for strength, longevity and consistent performance Continuous stainless steel water passage from bearing inlet to nozzle discharge for unobstructed flow Exclusive Quick Change Bearing Unique construction reduces theft potential Accepts standard straight bore, high uniformity and flow control nozzles Improved wedge design for more uniform coverage and rotation speed Double Bridge lever construction for added strength and protection of wedge alignment New design allows micro sprinkler flow rates. T-Ring style bearing for dependability Nozzle 5/64 3/32 7/64 1/8 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM G50-LAV-15 Nozzle Performance Nozzle 5/64 3/32 7/64 1/8 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM
9 ½ Impact Sprinklers Full Circle Full circle impact 23 trajectory ½ Male N.P.T.-Single nozzle Cast-bronze head with cored water passage and double bridge construction Wedge driven, die-cast lever with I-Beam construction for small nozzle sizes and fast rotation speed Stainless steel spindle, fulcrum pin, wedge pin, lever spring and bearing spring for long wearing durability T-Ring style bearing for proven dependability Designed for overhead frost protection and low precipitation rate application Standard Nozzle Performance Nozzle 1/16 5/64 3/32 7/64 1/8 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
10 ½ Impact Sprinklers Full Circle Full circle impact 23 trajectory ½ Male N.P.T.-Single nozzle Cast-bronze head with cored water passage and double-bridge construction Die-cast lever with I-Beam construction for added strength Stainless steel spindle, fulcrum pin, lever spring, and bearing spring for long-wearing durability T-Ring style bearing for proven dependability Designed for most solid-set and portable application Also available in ¾ Male N.P.T. Available with adjustable nozzle Standard Nozzle Performance Nozzle 3/32 #39 7/64 1/8 9/64 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
11 ½ Impact Sprinklers Full Circle 10-20L Low Angle Full circle impact Low angle available with 7, 12, 15, 18, or 20 low angle nozzle ½ Male N.P.T.-Single nozzle Cast-bronze head with cored water passage and double-bridge construction Cast-bronze lever with I-Beam construction for added strength Stainless steel spindle, fulcrum pin, lever spring and bearing spring for long-wearing durability T-Ring style bearing for proven dependability Designed for intermediate nozzle sizes for use in dairy washing and under-tree application Available in ¾ Male N.P.T. Specify nozzle angle when ordering 10-20L-7 Nozzle Performance (Nominal stream height 2.5 above normal pressure) Nozzle 7/64 1/8 9/64 5/32 11/64 3/16 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM L-12 Nozzle Performance (Nominal stream height 4 above normal pressure) Nozzle 7/64 1/8 9/64 5/32 11/64 3/16 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM L-20 Nozzle Performance (Nominal stream height 5 above normal pressure) Nozzle 7/64 1/8 9/64 5/32 11/64 3/16 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
12 ½ Impact Sprinklers Full Circle Full circle impact 23 trajectory ½ Male N.P.T.-Dual nozzle Cast-bronze head with cored water passage and double-bridge construction Die-cast lever with I-Beam construction for added strength Stainless steel spindle, fulcrum pin, lever spring, and bearing spring for long-wearing durability T-Ring style bearing for proven dependability Designed for increased precipitation rate and slightly increased spacing Also available in ¾ Male N.P.T Standard Nozzle Performance (Nominal stream height 7 above normal pressure) Nozzle 7/64x3/32 1/8x3/32 9/64x3/32 5/32x3/32 11/64x3/32 3/16x3/32 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
13 ½ Impact Sprinklers Full Circle 10-22L Low Angle Full circle impact Low angle-available with 7, 12, 15, 18, or 20 low angle nozzle ½ Male N.P.T.-dual nozzle Cast-bronze head with cored water passage and double-bridge construction Cast-bronze lever with I-Beam construction for added strength Stainless steel spindle, fulcrum pin, lever spring, and bearing spring for long-wearing durability T-Ring style bearing for proven dependability Designed for intermediate nozzle sizes for use in dairy washing and under-tree application Also available in 3 Male N.P.T. Specify nozzle angle when ordering 10-22L-7 Nozzle Performance (Nominal stream height 2.5 above normal pressure) Nozzle 7/64x3/32 1/8x3/32 9/64x3/32 5/32x3/32 11/64x3/32 3/16x3/32 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM L-12 Nozzle Performance (Nominal stream height 4 above normal pressure) Nozzle 7/64x3/32 1/8x3/32 9/64x3/32 5/32x3/32 11/64x3/32 3/16x3/32 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM L-20 Nozzle Performance (Nominal stream height 5 above normal pressure) Nozzle 7/64x3/32 1/8x3/32 9/64x3/32 5/32x3/32 11/64x3/32 3/16x3/32 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
14 ½ Impact Sprinklers Full Circle Full circle impact - 23 trajectory ½ Male N.P.T.-Single nozzle Cast-bronze head with cored water passage and double-bridge construction Extended water passage for greater diameter Cast-bronze lever with I-Beam construction for added strength Stainless steel spindle, fulcrum pin, lever spring, and bearing spring for long-wearing durability T-Ring style bearing for proven dependability Designed especially for portable or solid-set pasture and row-crop application Standard Nozzle Performance (Nominal stream height 7 above normal pressure) Nozzle 1/8 9/64 5/32 11/64 3/16 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
15 3/4 Impact Sprinklers Full Circle Full circle impact 23 trajectory ¾ Male N.P.T.-Single nozzle Cast-bronze head with cored water passage and double-bridge construction Cast-bronze lever with I-Beam construction for added strength Wide impact area increases lever life Stainless steel spindle, fulcrum pin, lever spring, and bearing spring for long-wearing durability T-Ring style bearing for proven dependability Designed as an all-purpose single-nozzle intermediate sprinkler Suitable for pasture, row-crop, overheadorchard, and a wide variety of other applications Standard Nozzle Performance (Nominal stream height 7 normal pressure) Nozzle 1/8 9/64 5/32 11/64 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Standard Nozzle Performance (Nominal stream height 7 normal pressure) Nozzle 3/16 13/64 7/32 15/64 1/4" PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
16 3/4 Impact Sprinklers Full Circle 10-30D Dual Nozzle Full circle impact 23 trajectory ¾ Male N.P.T.-Dual nozzle Cast-bronze head with cored water passage and double-bridge construction Cast-bronze lever with I-Beam construction for added strength Wide impact area increases lever life Stainless steel spindle, fulcrum pin, lever spring, and bearing spring for long-wearing durability T-Ring style bearing for proven dependability Designed as an all-purpose dual-nozzle intermediate sprinkler Suitable for pasture, row-crop, overhead-orchard, and a wide variety of other applications 10-30D Dual Standard Nozzle Performance (Nominal stream height 7 above nozzle normal pressure) Nozzle 1/8 x 3/32-7 9/64 x 3/32-7 5/32 x 3/ /64 x 3/ /64 x 1/8-20 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM D Dual Standard Nozzle Performance (Nominal stream height 7 above nozzle normal pressure) Nozzle 3/16 x 1/ /64 x 1/8-20 7/32 x 1/ /64 x 1/8-20 1/4 x 1/8-20 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
17 3/4 Impact Sprinklers Full Circle 10-30LD Low Angle Dual Nozzle Full circle impact - 15 trajectory ¾ Male N.P.T.-Dual nozzle Cast-bronze head with cored water passage and double-bridge construction Cast-bronze lever with I-Beam construction for added strength Wide impact area increases lever life Stainless steel spindle, fulcrum pin, lever spring, and bearing spring for long-wearing durability T-Ring style bearing for proven dependability Designed for pivot or linear systems Exceptional where wind conditions cause excessive drift 10-30LD 15 Single Standard Nozzle Performance (Nominal stream height 4 above pressure) Nozzle 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM LD 15 Dual Standard Nozzle Performance (Nominal stream height 4 above pressure) Nozzle 9/64x 3/32-7 5/32x 3/ /64x 3/32-7 3/16x 1/ /64x 1/8-20 7/32x 1/ /64x 1/8-20 1/4x 1/8-20 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
18 1 Impact Sprinklers Full Circle Full circle impact 23 trajectory Dual nozzle, Straightened-stream standard. Specify 1 Male or Female bearing Cast-bronze head with cored water passages and double-bridge construction Cast-bronze lever with I-Beam construction for added strength Wide impact area increases lever life Stainless steel spindle, fulcrum pin, lever spring, and bearing spring for long-wearing durability Designed as an all purpose medium, single-ordual nozzle, intermediate-to-high pressure sprinkler Range nozzle drive permits single-or-dual nozzle application for increased flexibility Ideal for solid-set and portable applications where wider spacing is required Brass plug is standard. May be ordered with spreader nozzle in sizes 7/64 through 7/32 upon request T-Ring style bearing for proven dependability Single Standard Nozzle Performance (Nominal stream height 10 above pressure) Nozzle 7/32 1/4" 9/32 5/16 11/32 3/8 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Single Standard Nozzle Performance (Nominal stream height 10 above pressure) Nozzle 7/32x11/64 1/4x11/64 1/4x3/16 9/32x3/16 9/32x7/32 5/16x7/32 11/32x7/32 3/8x7/32 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
19 1 1/4 Impact Sprinklers - Full Circle Full circle impact range nozzle at 23 trajectory and spreader nozzle at 15 trajectory 1 ¼ Male N.P.T.-Dual nozzle with straightenedstream standard Cast-bronze head with cored water passages and double-bridge construction Cast-bronze lever with I-Beam construction for added strength Wide impact area increases lever life Stainless steel spindle, fulcrum pin, lever spring, and bearing spring for long-wearing durability Designed as a large all-purpose single-or-dualnozzle, intermediate-to-high-pressure sprinkler Range nozzle drive permits single-or-dual-nozzle application for increased flexibility Used on quick-coupler systems row crop Also useful in any situation which requires extreme diameters or high flow rate, such as pasture, grain and similar applications Ideal for waste-water applications Single Plain Nozzle Standard Nozzle Performance(Nominal stream height 14 above nozzle@ normal pressure) Nozzle 11/32 3/8 13/32 7/16 15/32 1/2 17/32 9/16 5/8 11/16 3/4 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dual Plain Nozzle Standard Nozzle Performance(Nominal stream height 14 above nozzle@ normal pressure) Nozzle 11/32x7/32 3/8x7/32 13/327/32 7/16x7/32 15/32x7/32 1/2x1/4 17/32x1/4 9/16x1/4 5/8x1/4 11/16x1/4 3/4x1/4 PSI Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM Dia. GPM
20 1/2 Impact Sprinklers Part Circle G50 (Plastic Series) Part circle sprinkler available in standard 23 or low angle 7, and 15 trajectory Unit is equipped with all standard features of the G50 Genesis Plastic Series Sprinkler G50-23 Nozzle Performance Nozzle 5/64 3/32 7/64 1/8 PSI Rad. GPM Rad. GPM Rad. GPM Rad. GPM G50-15 Nozzle Performance Nozzle 5/64 3/32 7/64 1/8 PSI Rad. GPM Rad. GPM Rad. GPM Rad. GPM G50-7 Nozzle Performance Nozzle 5/64 3/32 7/64 1/8 PSI Rad. GPM Rad. GPM Rad. GPM Rad. GPM
21 1/2 Impact Sprinklers Part Circle Full or part circle impact adjustable from 25 to 340 ½ Male N.P.T. also available in ¾ Male N.P.T. Single nozzle brass straight-bore, tapered nozzle is standard, adjustable nozzle optional Cast-bronze head with cored water passage and double-bridge construction F/P trip standard Cast-bronze lever with I-Beam construction for added strength Wide impact area increases lever life Stainless steel parts include spindle, fulcrum pin, trip pins, lever spring, bearing and trip springs, and trip collars Designed as a small, all-purpose, full-or-part circle, single-nozzle, intermediate-pressure sprinkler Standard Nozzle Performance (Highest point of stream above nozzle is normal pressure Nozzle 7/64 1/8 9/64 5/32 11/64 3/16 PSI Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM
22 1/2 Impact Sprinklers Part Circle 15-20L Low Angle Full or part circle impact adjustable from 25 to 15-20L-7 Standard Nozzle Performance (Highest point of stream above nozzle is normal pressure) Nozzle 7/64 1/8 9/64 5/32 11/64 3/16 PSI Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM L-12 Standard Nozzle Performance (Highest point of stream above nozzle is normal pressure) Nozzle 7/64 1/8 9/64 5/32 11/64 3/16 PSI Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM L-20 Standard Nozzle Performance (Highest point of stream above nozzle is normal pressure) Nozzle 7/64 1/8 9/64 5/32 11/64 3/16 PSI Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Low-angle available with 7, 12, 15, 18 or 20 ½ Male N.P.T. Single nozzle Cast-bronze head with cored water passage and double-bridge construction F/P trip standard Cast-bronze lever with I-Beam construction for added strength Wide impact area increases lever life Stainless steel parts include spindle, fulcrum pin, trip pins, lever spring, bearing and trip springs and trip collars Designed as a small, all-purpose, low-angle, fullor-part circle, single-nozzle, intermediatepressure sprinkler Perfect companion for all small, low-angle sprinklers where arc of coverage must be adjustable
23 3/4 Impact Sprinklers Part Circle Full or Part circle adjustable from 20 to trajectory ¾ Male N.P.T. Single nozzle brass straight-bore (Tapered nozzle is standard) Cast-bronze head with cored water passage and double-bridge construction Full/Part cast-bronze lower trip with stainless steel pin is standard Cast-bronze lever with I-Beam construction for added strength Wide impact area increases lever life Stainless steel parts include spindle, fulcrum pin, trip pins, lever spring, bearing and trip springs, and trip collars Designed as an all-purpose, full or part circle, single-nozzle, intermediate to high pressure sprinkler Perfect companion for all intermediate sprinklers where arc of coverage must be adjustable Standard Nozzle Performance (Nominal stream height 9 above normal pressure) Nozzle 9/64 5/32 11/64 3/16 13/64 7/32 PSI Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM
24 1 Impact Sprinklers Part Circle Full or Part circle impact 23 trajectory 1 Male N.P.T.- dual nozzle, straightenedstream standard Specify 1 Male or Female bearing Cast-bronze head with cored water passages and double-bridge construction Cast-bronze lever with I-Beam construction for added strength Wide impact area increases lever life Stainless steel spindle, fulcrum pin, lever spring, and bearing spring for long-wearing durability Designed as an all purpose medium, single or dual nozzle, intermediate to high pressure sprinkler Range nozzle drive permits single or dual nozzle application for increased flexibility Ideal for pasture, waste water and dust control applications or where wider spacing is required Brass plug is standard. May be ordered with spreader Single Standard Nozzle Performance (Nominal stream height 10 above normal pressure) Nozzle 7/32 1/4" 9/32 5/16 11/32 3/8 PSI Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Dual Standard Nozzle Performance (Nominal stream height 10 above normal pressure) Nozzle 7/32x11/64 1/4x1164 1/4x3/16 9/32x3/16 9/32x7/32 5/16x7/32 11/32x7/32 3/8x7/32 PSI Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM
25 1 1/4 Impact Sprinklers - Part Circle Full or Part Circle impact adjustable from 25 to trajectory range nozzle and 15 trajectory spreader-nozzle 1 ¼ Male N.P.T. Dual nozzle brass tapered nozzle with non-clog vane is standard Cast-bronze head with cored water passage and double-bridge construction Cast-bronze lever with I-Beam construction for added strength Wide impact area increases lever life Stainless steel parts include spindle, fulcrum pin, trip pins, lever spring and bearing, and trip springs and trip collars Designed as a large, all purpose, part circle, dual nozzle, high pressure sprinkler Ideal for pasture irrigation, dust control or as a center pivot end gun. Also as a companion for all large sprinklers where arc of coverage must be adjustable Single Plain Nozzle Standard Performance (Nominal stream height 14 above normal pressure) Nozzle 11/32 3/8 13/32 7/16 15/32 1/2 17/32 9/16 5/8 11/16 3/4" PSI Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Dual Plain Nozzle Standard Performance (Nominal stream height 14 above normal pressure) Nozzle 11/32x 7/32 3/8x 7/32 13/32x 7/32 15/32x 7/32 1/2x 1/4 17/32x 1/4 9/16x 1/4 5/8x 1/4 11/16x 1/4 3/4x 1/4 PSI Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM Rad.GPM
26
27
28
29 Terms & Conditions ACCEPTANCE OF ORDERS No order placed with Weather Tec shall be considered as accepted until officially acknowledged in writing by Weather Tec. The terms and conditions stated herein shall constitute the entire sales agreement between the parties, and any contrary or additional terms and conditions submitted by parties other than Weather Tec, shall be deemed to be of no effect. Weather Tec reserves the right to select its own customers and the right to reject any order. DELIVERY Weather Tec shall not be liable for any delay or default in delivering products when occasioned by any cause of any kind or extent beyond the control of Weather Tec, including without limitation, armed conflict or economic dislocation resulting there from, embargoes, labor difficulties, civil disorders of any kind, action of civil or military authorities ( including priorities and allocations), fires, floods and accidents, and shortages of labor, raw materials, fuel energy, production facilities or transportation. It is intended that no liability shall be sustained by Weather Tec by reason of its not filling any order or portion thereof affected by any such occurrence. PRICES & FREIGHT All prices are subject to change without notice. Prices are F.O.B. shipping point, transportation pre paid and allowed for any single shipment of $5, net or more to one destination in the Continental United States. For lesser orders products will be shipped freight collect. TERMS OF PAYMENT Net 30 days. A finance charge of 1.5% per month will be applied (an annual percentage rate of 18%) on all past due accounts. TAXES Any tax or other governmental charge upon the production, sale, or shipment of products imposed by federal, state, municipal, or other authorities shall be added to the price to be paid by the purchaser. WARRANTY All products sold are subject to the following warranty: Weather Tec warrants for a period of five years from the date the products are installed (if sufficient evidence of such date exists) that the product is free from defects in materials and workmanship. Other than the limited warranty set forth above, Weather Tec makes no other representation or warranty of any kind, express or implied, in fact or in law, including without limitation the warranty or merchantability or the warranty of fitness for a particular purpose. Every claim under this warranty shall be deemed waived unless it is in writing and is received by Weather Tec within thirty (30) days of the date the defect to which each claim relates is discovered or shall have been discovered. LIMITATION OF LIABILITY It is expressly understood and agreed that the limit of liability of Weather Tec shall be, at the sole option of Weather Tec, repair or resupply of a like quantity of nondefective product and that Weather Tec shall have no such liability except when the damage results solely from the breach of the Weather Tec warranty. It is also agreed that Weather Tec shall not be liable for any incidental, consequential, or other damages for any alleged negligence, breach of warranty, strict liability, or any theory other than the limited liability set forth above. No person has the authority to waive, alter or add to the printed provisions of this warranty or to make representation of warranty not contained herein. TITLE Title to goods described herein shall remain in Weather Tec until paid for in full by purchaser. However, risk of loss shall vest in the purchaser at the time of delivery of products to the carrier at the Weather Tec plant. RETURNS No return of products will be accepted without prior written approval. Weather Tec will, on written authorized returns, charge 20% of the original purchase price for handling and restocking. Credit will be based upon the quantity received at the Weather Tec shipping point in resalable conditions, as determined by Weather Tec. CANCELLATION OF ORDERS Cancellation request must be received at factory prior to order shipment. Items of special manufacture and large orders beyond normal purchase are not cancellable without written approval. MODIFICATION OR TERMINATION These terms and conditions of sale cancel and supersede all previous issues, supplements, and revisions and are subject to change without prior notice. 27 *5645 E. Clinton Avenue Fresno, CA * Phone (559) * Fax (559) * *Toll Free (800) *
30
31
32
ZAMAC FITTINGS. Zamac Pipe Fittings. Toll Free (800) Fax (866) :00 am to 4:30pm PST
Zamac Pipe Fittings Pipe Plugs 660-01 1/2 660-02 3/4 660-03 1 660-04 1-1/4 Bell Reducers 661-01 3/4 x 1/2 661-02 1 x 1/2 661-03 1 x 3/4 661-04 1-1/4 x 1 Toll Free (800) 410-5263 Fax (866) 410-5263 ZAMAC
More informationNELSON. BUILT STRONGER TO LAST LONGER! Large impact surfaces for consistent long life drive. Sturdy Drive Arm
IS IMPACT SPRINKLERS NELSON. BUILT STRONGER TO LAST LONGER! There s a very basic reason behind the popularity of Nelson Impact Sprinklers. Our impacts offer a number of exclusive features and advantages
More information5022 SD - 1/2" Impact Sprinkler
Impact Sprinklers 5022 SD - 1/2" Impact Sprinkler Full Circle Impact- 25 trajectory 1/2" Male N.P.T. Single and Dual Bayonet s Plastic Bearing Plastic head and lever for strength, durability, and consistent
More informationZAMAC FITTINGS. Zamac Pipe Fittings. Toll Free (800) Fax (866) :00 am to 4:30pm PST
Zamac Pipe Fittings Pipe Plugs 660-01 1/2 660-02 3/4 660-03 1 660-04 1-1/4 Bell Reducers 661-01 3/4 x 1/2 661-02 1 x 1/2 661-03 1 x 3/4 661-04 1-1/4 x 1 Toll Free (800) 410-5263 Fax (866) 410-5263 ZAMAC
More informationHR-20P Pneumatically Controlled Pressure Regulator
HR-20P Pneumatically Controlled Pressure Regulator Instruction and Service Manual Hydroplex Corporation 230 West Gloria Switch Rd. Lafayette, LA 70507 337-233-0626 www.hydroplexpumps.com I. General Instructions
More informationPrice List. Catalog Eleven. Rigging. Effective February 16, Specialties Inc. manufacturer of stage equipment
Price List Catalog Eleven Rigging Effective February 16, 2015 & manufacturer of stage equipment (626) 575-0776 14850 Don Julian Road, Suite B (800) 221-9995 City of Industry CA 91746 www.hhspecialties.com
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #101016 EFFECTIVE: OCTOBER 1, 2016 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027
More information6A-1773 Q ISO-2944
6A-1773 Q1-2801 ISO-2944 Lowery Well Heads, Inc. Quality is #1 We are happy to announce that as of 9-11-15 we are now API Q1 and ISO 9001 certified. Lowery Well Heads, Inc. is committed to its customer
More informationSTC 2L Series Solenoid Valves
STC 2L170-500 Series Solenoid Valves 2L170-500 Series Solenoid Valve Specifications Valve Model 2L170-3/8 2L170-1/2 2L170-3/4 2L200-1 2L300-1 1/2 2L500-2 Valve Type Action 2 Way, Normally Closed (NC) Pilot
More informationTERMS OF USE TERMS AND CONDITIONS. Plumbing and Heating Products (PL-WR)
TERMS OF USE 1. Watts pricing and product data is subject to change without notice and such changes supersede all previous versions. 2. Watts data is to be used as provided. Watts is not responsible for
More informationSTC 2W Series Solenoid Valves
STC 2W160-500 Series Solenoid Valves 2W160-500 Series Solenoid Valve Specifications Valve Model 2W160-3/8 2W160-1/2 2W200-3/4 2W250-1 2W350-1 1/4 2W400-1 1/2 2W500-2 Valve Type Action 2 Way, Normally Closed
More informationR10 & R10 Turbo. The R10 and R10 Turbo are part of the Nelson Rotator family of sprinklers. R10-11 U.S. & METRIC
R10 & R10 Turbo R10-11 U.S. & METRIC R5 R10 R10 Turbo R2000 R2000LP/WF 9-29 GPH 0.3-0.7 GPM 0.6-2.1 GPM 0.7-3.5 GPM 0.9-5.7 GPM 34-110 LPH 61-164 LPH 140-469 LPH 150-792 LPH 191-1295 LPH The R10 and R10
More information2V1-3V1 SERIES SOLENOID VALVE
2V1-3V1 SERIES SOLENOID VALVE Valve Model 2V1 3V1 Port & Mounting Body Ported, Stacking Action & Motion Solenoid, Direct Acting, 2 Way Response Time
More informationGWC Valve International
GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE API 6D SWING CHECK VALVES Pressure Class: ASME 150-2500 Size Range: 2-36 CATALOG NUMBER SC-1001 G W C V A L V E I N T
More informationDual Phase Extraction Inlet. Patent No Installation Manual. P/N Rev
Patent No. 6520259 Installation Manual P/N 95232 Rev 6-16-11 Table of Contents ing Extraction Inlets track changing water levels to maintain optimum performance 1.Component Identification Page 1 2. How
More informationPVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
More informationManufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1
STEEL NIPPLES S40 & S80 Steel Nipple Product Specifications Manufacturing Facility is ISO9001:2000 Welded Steel Pipe Conform to ASTM A53 Threads Conform to ASME B1.20.1 800-678-2544 800-678-0857 www.msi-products.com
More information3V SERIES SOLENOID VALVE
3V110-410 SERIES SOLENOID VALVE Valve Model 3V110-1/8 3V210-1/4 3V310-3/8 3V410-1/2 Port & Mounting Action & Motion Operating Pressure Body Ported Air Pilot, Spool Design, Response Time
More informationSTC 2P025 Series Solenoid Valve
STC 2P025 Series Solenoid Valve 2P025 Series Solenoid Valve Specifications Valve Model Valve Type Action Cv (Orifice) Operating Pressure Operating Temperature 2P025 2 Way, Normally Closed (NC) Direct Acting
More informationALITA LINEAR AIR PUMP OPERATION & MAINTENANCE MANUAL. AL- Model Number Date Code / Serial Number Date of Purchase
ALITA LINEAR AIR PUMP OPERATION & MAINTENANCE MANUAL AL- Model Number Date Code / Serial Number Date of Purchase LIMITED WARRANTY ALITA warrants to the original retail consumer purchaser ( Customer ) that
More informationFrekote Adjustable Spray Applicator 6 Extension Extension Extension EQUIPMENT Operation Manual
Frekote Adjustable Spray Applicator 6 Extension 98183 12 Extension 98184 24 Extension 98185 EQUIPMENT Operation Manual 1 Please Observe The Following 1.1 Emphasized Sections Warning! Refers to safety regulations
More information4V130P-430P SERIES AIR PILOT VALVE
4V130P-430P SERIES AIR PILOT VALVE Valve Model 4V130P-1/8 4V230P-1/4 4V330P-3/8 4V430P-1/2 Port & Mounting Action & Motion Operating Pressure Body Ported Double Solenoid, Spool Design, 3 Position, Pressure
More informationSTC 2DS Series Anti-Hammering Slow Closing Pilot Solenoid Valves
STC 2DS500-2000 Series Anti-Hammering Slow Closing Pilot Solenoid Valves 2DS500-2000 Series Solenoid Valve Specifications Valve Model 2DS400F 2DS500F 2DS650F 2DS800F 2DS1000F 2DS1250F 2DS1500F 2DS2000F
More informationPCC O P E R A T I O N S. Pump Cycle Counter M A N U A L. Environmental Systems
O P E R A T I O N S Environmental Systems PCC Pump Cycle Counter M A N U A L PO Box 3726 Ann Arbor, Michigan 48106-3726 (800) 624-2026 North America Only (734) 995-2547 Tele. (734) 995-1170 Fax info@qedenv.com
More informationWARRANTY POLICY. Grid-Tied Photovoltaic Inverters. Revision D. 2014, Solectria Renewables, LLC DOCIN
WARRANTY POLICY Revision D 2014, Solectria Renewables, LLC DOCIN-070360 1 Product Warranty & RMA Policy 1. Warranty Policy Warranty Registration: It is important to have updated information about the inverter
More informationStainless Steel Pilot Piston Solenoid Valve 2MS Series for High Temperature & High Pressure
Stainless Steel Pilot Piston Solenoid Valve 2MS Series for High Temperature & High Pressure S T C TM To Order, Please Specify: 1) Model No., 2) Voltage 2 Way, NC Pilot Piston Stainless Steel Part No. Voltage
More informationSTAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications
STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications Manufactured in ISO9000:2000 Facility Manufactured to ASTM/ASME A182/SA182 Items conform
More informationService Guide JATCO Environmental Protection Tank Model J-7000
Service Guide JATCO Environmental Protection Tank Model J-7000 Listed below are a series of steps to follow if the JATCO tank fails to dump properly. #1. Be sure there is an adequate supply of gas pressure
More informationSTEEL PIPE NIPPLES - WELDED Price Sheet PNW-7.18 Effective: July 16, 2018 Cancels Price Sheet PNW-3.18 of March 5, 2018
STEEL PIPE NIPPLES - WELDED Price Sheet PNW-7.18 Effective: July 16, 2018 Cancels Price Sheet PNW-3.18 of March 5, 2018 FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT
More informationKennedy Valve. A Division of McWane, Inc. AWWA PRODUCTS
Kennedy Valve A Division of McWane, Inc. AWWA PRODUCTS 1021 East Water Street Elmira, NY 14902 Phone: (607)734-2211 Fax: (607)734-3288 Fax: (800)952-4771 E-Mail: sales@kennedyvalve.com www.kennedyvalve.com
More informationEQUIPMENT Instructions. Loctite Pneumatic 300 ml Cartridge Dispenser Part Number
EQUIPMENT Instructions Loctite Pneumatic 300 ml Cartridge Dispenser Part Number 1294304 1. Unpacking and Inspection Carefully unpack the Loctite Pneumatic 300 ml Cartridge Dispenser and examine the items
More informationMODEL V-24 OWNER'S MANUAL PARTS
OWNER'S MANUAL MODEL V-24 PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not vehicle capacities or capabilities.
More informationSR75 BIG GUN SR75 BIG GUN PARTS LIST SR75 WITH HD100 BEARING ASSEMBLY
SR75PL-7 SR75 BIG GUN SR75 BIG GUN PARTS LIST SR75 WITH HD100 BEARING ASSEMBLY SR75 WITH CB75 BEARING ASSEMBLY NOTE: not approved for center pivot end gun application 10347-XXX BODY ASSEMBLY, SR75 6089
More informationCarbon Steel Nipples
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications
More informationBC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO
MEX (55) 5 6 QRO (44) 95 7 60 MTY () 54 0 BC Brake Caliper (i) FORM NO. L-0066-B-040 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this
More informationEND USER TERMS OF USE
END USER TERMS OF USE The following is the End Users Terms of Use as it currently appears in the Mobileye User Manual and Warranty information. This is here for your review and information; it is subject
More informationExtreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual
Extreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual Revision Date: May 12, 2017 Skid Pro PO Box 982 Alexandria, MN 56308 Toll Free: 877-378-4642 www.skidpro.com TABLE OF
More informationEPIC. express line. Proudly Manufactured in the USA by Check-All Valve Rev. D
EPIC BY express line Proudly Manufactured in the USA by Check-All Valve www.checkall.com Express Line EPIC By Check-All Valve In the beginning... the first Check-All valve was designed and built for use
More information430B SERIES HORIZONTAL SPLIT CASE PUMP
430B SERIES TWO Stage - DIAGONALLY HORIZONTAL SPLIT CASE PUMP REPAIR PARTS INDEX NOTE! Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump.
More informationSOLAR DASH CHARGING SYSTEM USER GUIDE
SOLAR DASH CHARGING SYSTEM Doc 1.01 INST049 INSTALLATION STEP 1 Place 20 watt solar panel in the dash of the vehicle facing up. Note: For ideal results position the vehicle in a manner in which the solar
More informationProfessional Grade Agricultural Pumps.
Professional Grade Agricultural Pumps. spro 1 Delavan knows what HD Magnum PowerFLO PowerMAX 2 you need out of a pump. Turbo-90 RollerPRO 3 Sizing, Selection & Plumbing Diagrams How to Determine Pump Capacity
More informationSR75 BIG GUN SR75 BIG GUN PARTS LIST. SR75 WITH hd100 SR75 WITH CB75. NOTE: not approved for center pivot end gun application
SR75PL-5 SR75 BIG GUN SR75 BIG GUN PARTS LIST SR75 WITH hd100 Bearing Assembly SR75 WITH CB75 Bearing Assembly NOTE: not approved for center pivot end gun application 10347-xxx Body Assembly, SR75 6089
More informationSTC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way
STC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way Ordering Part No. = (e.g., E 1/2-3-S) Indicator / Control E 1/2 - - - 3-S Model Name Electric Actuated Valves E Port Size
More informationLevel Alert Model Multi-Switch Liquid Level Sensor. Assembly and Installation Instructions
Level Alert Model 2000 Multi-Switch Liquid Level Sensor Assembly and Installation Instructions Kit Form Each unit is provided in kit form with step-by-step instructions, making it extremely easy to custom
More informationLoctite 300ml Cartridge Pusher Part Number EQUIPMENT Operation Manual
Loctite 300ml Cartridge Pusher Part Number 98022 EQUIPMENT Operation Manual Table Of Contents 1 PLEASE OBSERVE THE FOLLOWING... 3 1.1 EMPHASIZED SECTIONS...3 1.2 FOR YOUR SAFETY...3 1.3 ITEMS SUPPLIED...3
More informationEWS FLUID END PARTS LIST
GARDNER DENVER Rev C September 2005 WELL SERVICING PUMP MODEL C-2500 QUINTUPLEX EWS FLUID END PARTS LIST ECN 1027623 C-2500 WELL SERVICING PUMP MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH GENUINE GARDNER
More informationStormPro BA Series Sump Pump
Page 1 of 8 Marks & Meanings DANGER: Keep the pump equipment out of the reach of children! Warns that the failure to follow the directions given could cause serious risk to individuals or objects. WARNING:
More informationJunior Sandblaster. Model #51 WARNING! FOR YOUR SAFETY PLEASE READ INSTRUCTIONS BEFORE OPERATING TOOL & WEAR EYE PROTECTION
Junior Sandblaster Model #51 WARNING! FOR YOUR SAFETY PLEASE READ INSTRUCTIONS BEFORE OPERATING TOOL & WEAR EYE PROTECTION PARTS LIST AND PART NUMBERS 01.Red Rubber Air Hose (5Ft) P51-01 02. Male Insert
More informationWatts Series CSM-61. Flow Measurement/Balancing Valves Sizes: 1 1 4", 1 1 2", 2", 2 1 2", and 3" (32, 40, 50, 65 and 80mm) Installation Instructions
Watts Series CSM-61 Measurement/Balancing Valves Sizes: 1 1 4", 1 1 2", 2", 2 1 2", and 3" (32, 4, 5, 65 and 8mm) Installation Instructions IS-CSM-61-L Watts Measurement/Balancing Valves are available
More informationS T C. STC Air Actuated Valves. Fine Quality. Precision Engineered Advanced Design. Excellent Prices. connects fluid power to industrial automation TM
Precision Engineered Advanced Design Catalog No.: PUB09KS STC Air Actuated Valves Fine Quality Excellent Prices connects fluid power to industrial automation Website: StcValve.com STC PNEUMATIC ACTUATED
More informationVERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS
480 MODELS VERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS REPAIR PARTS INDEX NOTE! Read and understand the pump and driver instructions before attempting to install, disassemble or repair the pump. Part
More information20250 Module Installation Guide
20250 Module Installation Guide 2013.5-2017 RAM 6.7L Cummins Up to 90HP Gain 1-3 MPG Fuel Savings AgDieselSolutions.com Adjustable switch connector Power +12 volts (Red wire) & Ground (Black wire) Injector
More informationWEB CONTROL PRODUCTS
WEB CONTROL PRODUCTS User Manual MB Tension Sensor (i) FORM NO. L-20127-G-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual
More informationModel F822 thru F834 Mulsifyre Directional Spray Nozzles, Open, High Velocity General Description
Technical Services: Tel: () 31-931 / Fax: () 791-55 Model F thru F3 Mulsifyre Directional Spray Nozzles, Open, High Velocity General Description The Mulsifyre Nozzles are open (nonautomatic) nozzles and
More informationModel 8346/8346CRP Shower & Eye/Face Wash
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com No. 2080177(15) Model 8346/8346CRP
More informationDia Vac Pump Operating Instructions Heated Head E Series Pump with General Purpose Motor
Dia Vac Pump Operating Instructions Heated Head E Series Pump with General Purpose Motor Air Dimensions Incorporated 1371 West Newport Center Drive, Suite # 101 Deerfield Beach, FL, 33442 800.423.6464
More informationINSTRUCTIONS SMOKE BLOWER WITH HONDA ENGINE PART NUMBER
1 INSTRUCTIONS SMOKE BLOWER WITH HONDA ENGINE PART NUMBER 303-568 CHERNE INDUSTRIES INCORPORATED 1-800-THE PLUG 5700 LINCOLN DRIVE (1-800-843-7584) MINNEAPOLIS, MN 55436-1695 FAX: 1-800-843-7585 www.cherneind.com
More informationAir Dimensions Incorporated
Dia-Vac Pump Operating Instructions Standard B-Series Pump with Brushless DC Motor Air Dimensions Incorporated 1371 West Newport Center Drive, Suite # 101 Deerfield Beach, FL, 33442 800.423.6464 / 954.428.7333
More informationFREQUENTLY ASKED QUESTION SERIES. BANJO BOLTS WHY THE BAD RAP? 6.0L Powerstroke Diesel. Last Updated: 7/2/2018 Page 1 of 3 S Diesel, LLC
FREQUENTLY ASKED QUESTION SERIES BANJO BOLTS WHY THE BAD RAP? 6.0L Powerstroke Diesel Last Updated: 7/2/2018 Page 1 of 3 S Diesel, LLC Ihave been getting a bunch more comments and questions from customers
More informationSTC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting
STC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting Female NPT Thread 3/8 Push-In Fitting 2P050 Series Solenoid Valve Specifications Valve Model 2P050-1/4 2P050-3/8 2P050-3/8F
More informationStraight-Bore Clutch LSCC-32, 44, 54
Straight-Bore Clutch LSCC-32, 44, 54 1 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical
More informationModel GX Spray Gun
"Teamwork & Communication" Model GX-7-400 Spray Gun Parts Identification Manual 17943-ID May 24, 1999 Issue 2 GUSMER CORPORATION A Subsidiary of Gusmer Machinery Group, Inc. One Gusmer Drive Lakewood,
More informationIRRIGATION IMPACT SPRINKLERS CATALOGUE 2012
IRRIGATION IMPACT SPRINKLERS CATALOGUE 2012 Tel Aviv-Jaffa, Israel E-mail: argos@argosinvest.net Website: www.argosinvest.net AR044 :: PERFORMANCE DATA full circle, plastic impact sprinkler, 1/2" male
More informationINSTALLATION & OPERATING INSTRUCTIONS: REVOLUTION SPINEBOARD ATTACHMENT WARNING
INSTALLATION & OPERATING INSTRUCTIONS: REVOLUTION SPINEBOARD ATTACHMENT LOAD CAPACITY: 500 LBS [227 kg] MANDATORY: LEAVE THIS MANUAL WITH LIFT OWNER WARNING 1. READ AND FOLLOW ALL INSTRUCTIONS. LIFT SAFETY
More informationFemale Plug. connecting to Fuel Quantity
**Ag Diesel Solutions recommends replacing the Transorb/Suppressor Diode before the installation of this module*** Red wire = 12V Constant power. Male Plug connecting to Fuel Quantity Valve Black wire
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #100217 EFFECTIVE: FEBRUARY 6, 2017 REV. 1 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 (800) 248-1027 Sheet #100217,
More informationDAP-625S and DAP-875S
AIR CHAMP PRODUCTS DAP-625S and DAP-875S (i) FORM NO. L-20078-B-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationHIGH VELOCITY WATER SPRAY NOZZLE (BRASS)
HIGH VELOCITY WATER SPRAY NOZZLE (BRASS) TECHNICAL DATA MODEL MAXIMUM WORKING PRESSURE EFFECTIVE WORKING PRESSURE END CONNECTION MATERIAL DESCRIPTION HV-AS with strainer 12 Bar (175 PSI) 3.5 Bar to 10.5
More informationOPERATOR S MANUAL HD 2.3/24 P CD HD 2.3/23 P CD
OPERATOR S MANUAL Model Order # Model HD 2.3/24 P - 1.575-350.0 CD-232336 HD 2.3/23 P - 1.575-351.0 CD-232437 To locate your local Kärcher Commercial Pressure Washer Dealer nearest you visit www.karchercommercial.us
More informationSingle Post Caliper Brake VC500
Single Post Caliper Brake VC500 1 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical
More informationReelGreen RG20 Instruction Manual For Operation and Maintenance
ReelGreen RG20 Instruction Manual For Operation and Maintenance BigSprinkler.com 15250 Sunshine Rd. Yukon, OK. 73099 800-373-9325 Introduction Thank you for purchasing a ReelGreen RG20 traveling sprinkler
More informationModel D Spray Gun. Parts Identification Manual 2943J-ID. "Success through Unity" June 17, 2003 Issue 2 GUSMER CORPORATION
"Success through Unity" Model D Spray Gun Parts Identification Manual 2943J-ID June 17, 2003 Issue 2 GUSMER CORPORATION A Subsidiary of Gusmer Machinery Group, Inc. One Gusmer Drive Lakewood, New Jersey,
More informationST-70 CONTROL OPERATING MANUAL REVISION DATE: PART#:
ST-70 CONTROL OPERATING MANUAL REVISION DATE: 05-15-07 PART#: 98-0002-09 SERVICE & CUSTOMER INFORMATION CUSTOMER MUST HAVE PART NUMBER WHEN ORDERING ITEMS THROUGH THE SERVICE DEPARTMENT. IF FURTHER HELP
More informationSlimline Duals Installation Instructions Harley-Davidson Touring Models 2009-Current
Slimline Duals Installation Instructions Harley-Davidson Touring Models 2009-Current Thank you for buying a Rinehart Racing exhaust system. We are committed to providing premium products that with proper
More informationPREMIER, MARINE, & STANDARD
INSTA LLATION INSTRUCTION AND SERVICE MANUAL I TITAN 12" x 2" BRAKES FREE BACKING. UNI-SERVO. DUO-SERVO PREMIER, MARINE, & STANDARD Limited Warranty TITAN Inc. ("TITAN') warrants its products to be free
More informationTerms and Conditions
Terms and Conditions GUARANTEE: All Brighton-Best International, Inc. products are manufactured to rigid quality control standards which meet or exceed industry standards. Records and tests pertaining
More informationINSTALL GUIDE Dodge/RAM 5.7L HEMI
INSTALL GUIDE 2009-2017 Dodge/RAM 5.7L HEMI TABLE OF CONTENTS 3 GETTING STARTED 3 PARTS LIST 4 INSTALLATION INSTRUCTIONS 4 REMOVING THE STOCK INTAKE ASSEMBLY 6 INSTALLING THE AIR FILTER 7 INSTALLING THE
More informationToro Sprayer Calibration Tool
Commercial Products Toro Sprayer Calibration Tool User Guide & Installation Instructions Toro Sprayer Calibration Tool 1 Table of Contents Introduction... 2 Program Instructions... 4 Toro Software End
More informationAPCO ASR-400/450 SEWAGE AIR RELEASE VALVES
APCO ASR-400/450 SEWAGE AIR RELEASE VALVES Instruction D12005 December 2012 Instructions These instructions provide installation, operation and maintenance information for the APCO ASR- 400/450 Sewage
More informationTONS. Before each shift: Before operating: Before initial operation of hoist:
LEVER HOIST 0.25 9 TONS Manual Notice It is the responsibility of the owner/user to install, inspect, test, maintain, and operate these lever hoists in accordance with ASME B30.21, Safety Standard for
More informationActuLink ABS Module - ABS-MOD-400
Installation Instructions ActuLink ABS Module - ABS-MOD-400 For more information on the installation and operation of Tuson s towable ABS system, consult the installation and operations manuals for the
More informationElgin Hydraulic Clutch-Brake ECB-240, Product Number FORM NO. L F FORM NO. L F-0704
Elgin Hydraulic Clutch-Brake ECB-20, Product Number 96225 FORM NO. L-20283-F-070 1 FORM NO. L-20283-F-070 In accordance with Nexen s established policy of constant product improvement, the specifications
More informationAV16, AV26, AV36, AV46, AV56, LH25, LH29, LH35, LV20, LV21, LV35 & LV36 Series Manual
Switch-Tek Horizontal, Vertical & Float-Point Float Switches AV16, AV26, AV36, AV46, AV56, LH25, LH29, LH35, LV20, LV21, LV35 & LV36 Series Manual Flowline, Inc. 10500 Humbolt Street, Los Alamitos, CA
More informationJD2800 Module Installation Guide
Up to 30% More Horsepower 10-20% Fuel Savings John Deere 9.0L Tier III Denso Common Rail Engines JD2800 Module Installation Guide AgDieselSolutions.com Ground Terminal Power (+12V constant) Terminal Injector
More informationI-BEAM LADDER TRAY SYSTEM
I-BEAM LADDER TRAY SYSTEM 20 OCEAN-1 MARINE PRODUCTS, LTD. MARINE & OFFSHORE CABLE TRAY SYSTEMS Section Page Marine Channel 2 Flatbar Ladder Tray 35 C-Rail Leg-In Ladder Tray 46 I-Beam Ladder Tray 67 Important
More informationInstallation & Operating Instructions for Zone Valve Boxes & Ball Valves
V Series Zone Valve Box EV Series Zone Valve Box Ball Valve Page 1 of 9 Introduction The Powerex ball valves and zone valve boxes are cleaned for use with oxygen. Each valve is tested for leakage in both
More informationFifth Wheel Power Hitch Operations Manual
Fifth Wheel Power Hitch Operations Manual ITD1253 Fifth Wheel Power Hitch 208 587 7960 www.intheditch.com This page is intentionally left blank. Operations Manual 1 TABLE OF CONTENTS TABLE OF CONTENTS...
More informationLU27 Series Quick Start
Ultrasonic Liquid Level Transmitter LU27 Series Quick Start 2016 Flowline, Inc. All Rights Reserved Made in USA Flowline, Inc. 10500 Humbolt Street, Los Alamitos, CA 90720 p 562.598.3015 f 562.431.8507
More information5000 Series Rotors 5000, Plus, PRS, SAM
Tech Spec 5000 Series Rotors 5000, Plus, PRS, SAM Built from top to bottom with the contractor in mind, the Rain Bird 5000 Series product line is the durable, reliable rotor for residential and commercial
More informationOperating Instructions & Parts Manual. Oil Control Gun. Models 48UJ82, 48UJ83, 48UJ84, 48UJ85 and 48UJ86
Operating Instructions & Parts Manual EN Oil Control Gun Models 48UJ82, 48UJ83, 48UJ84, 48UJ85 and 48UJ86 PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL,
More informationP/N# Performance Lowering Springs Installation Instructions
P/N# 19391 Performance Lowering Springs Installation Instructions Thank you for your purchase of this Hotchkis Performance product. Your Lowering Spring set was designed with the performance and durability
More informationGORE TRAILER MANUFACTURING INCORPORATED 305 Gore Trailer Road Whiteville, North Carolina 28472
(Revised September, 2005) GORE TRAILER MANUFACTURING INCORPORATED 305 Gore Trailer Road Whiteville, North Carolina 28472 WARRANTY TEN YEAR WARRANTY Subject to the requirements, exclusions and limitations
More informationModel 8317 Combination Shower Eye/Face Wash
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com Model 8317 Combination Shower
More informationTRUCK PRODUCT LINE A DIVISION OF DAKOTA FLUID POWER, INC.
TRUCK PRODUCT LINE 2210 Main Ave W, West Fargo, ND 58078 877.410.7072 www.epgdivision.com A DIVISION OF DAKOTA FLUID POWER, INC. ABOUT US About: Engineered Products Group (EPG), a division of Dakota Fluid
More informationDODGE CUMMINS Arctic-Heat Grid Relocation Kit
Installation Manual P/N 07509-350-GRK 2007.5-09 DODGE CUMMINS Arctic-Heat Grid Relocation Kit Installation Instructions P/N 07509-350-GRK GDP Arctic-Heat Grid Heater Installation PLEASE READ ALL INSTRUCTIONS
More informationPIPE FITTING ACCESSORIES EFFECTIVE JANUARY 14, 2019
IMPORT PRICE LIST PIPE FITTING EFFECTIVE JANUARY 14, 2019 version: IMP-ACC-UPL.19.01 EFFECTIVE: JANUARY 14, 2019 (SUPERSEDES ALL PREVIOUS PRICING) CORONA CALL CENTER (U.S.) Toll Free: (877) 701-7827 Fax:
More informationTITAN 13 x 2½ BRAKES DUO-SERVO AND FREE BACKING
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
More informationGC-1. Roof and Gutter De-Icing Control Installation and Operating Instructions FOR EXTERIOR INSTALLATION ONLY
GC-1 Roof and Gutter De-Icing Control Installation and Operating Instructions FOR EXTERIOR INSTALLATION ONLY GENERAL INFORMATION The GC-1 heating cable controller has been designed and manufactured for
More informationAMES 2016 Price List. Backflow Prevention Products and Repair Kits and Parts. Effective February 29, 2016
AMES 2016 Price List Backflow Prevention Products and Repair Kits and Parts Effective February 29, 2016 All prices supersede previous issues, are temporary and subject to change without notice. AmesFireWater.com
More information1800,1900 MODELS VERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS
1800,1900 MODELS VERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS REPAIR PARTS INDEX NOTE! Read and understand the pump and driver instructions before attempting to install, disassemble or repair the pump.
More information