GREENHOUSE, NURSERY & AG PRODUCT CATALOG

Transcription

1 GREENHOUSE, NURSERY & AG PRODUCT CATALOG 1210 Activity Drive Vista, California FAX Copyright All Rights Reserved. Printed in USA 2010 Catalog WE AT DIG STRONGLY BELIEVE IN RECYCLING. PLEASE RECYCLE. C

2 COMPANY STATEMENT EXL FOGGER SERIES 500 MODEL 50-50X-XX Vision: Values: Intelligent Irrigation Solutions Mission: DIG is defined by our commitment to our customers. We strive to exceed customer expectations by embracing continuous improvement throughout our organization. DIG is dedicated to the research and development of quality, environmentally conscious irrigation products that support our customers needs. We are committed to our customers success and to helping them achieve their goals. We will proactively develop products of the highest quality in an effort to satisfy global customer needs. We will constantly strive to develop products that use the earth s resources wisely. We will continue to engage in educational opportunities for our customers and employees. We place a high value on integrity and will communicate openly and honestly with our customers and employees. EXL 500 is designed as a low flow fogger head with micro-sized droplets. Design flexibility is achieved with interchangeable nozzles to maximize the cooling and humidifying options. DIG S EXL xx fogger can significantly reduce the temperature inside greenhouses to maintain ideal temperature and humidity. Mist cooling and humidifying Root development Material male and female body: polybutylene (PB); O-ring: Buna N; nozzle: acetal Nominal flow rate at 50 PSI (3.5 BAR) Pattern: 360 Trajectory angle: approximately Average droplet size is microns Filter requirements: flow up to 1.5 GPH (6 L/H) Minimum of 200 mesh (80 microns), 2 GPH (8 L/H) and up to 155 mesh (100 micron) Used only with antileak model x 1 TABLE OF CONTENTS EXL-FOGGER SERIES 500 EXL Fogger... 2 MICRO SPRAYER SERIES 038 Micro Sprayer... 3 High Uniform Bench Crop Watering... 4 ANTILEAK DEVICE Antileak Device... 4 MINI-COMPACT MICRO SPRINKLER SERIES 866 Mini-Compact Micro Sprinklers... 5 High Uniform Bench Crop Watering... 6 MINI SPRINKLER SERIES 700 Mini Sprinklers... 7 MINI-COMPACT SPRINKLER SERIES 861 Mini-Compact Sprinklers FLOW REGULATED MINI-COMPACT MICRO SPRINKLER SERIES 861 Flow Regulated Mini-Compact Micro Sprinkler... 9 COMPACT MICRO SPRINKLER SERIES 961 Compact Micro Sprinkler MULTI-OUTLET DRIP EMITTERS Multi-Outlet Pressure Compensating Drippers PROPAGATION AC & DC CONTROLLERS AC & DC Controllers LEIT-2 LEIT-2 & LEIT RC ACCESSORIES Accessories Incorporates a vortex mechanism, breaking the water into micro-sized droplets Can be used for overhead cooling and humidifing in a closed structure Interchangeable color coded nozzles Can be used on an antileak device with one, two, three or four fogging head assemblies Designed without a bridge to prevent dripping Three part construction with O-ring for a tight seal Manufactured from superior durable plastics for extended life operation Available on 1/2, 3/8 or 10/32 threaded base or completely assembled with 24 (60 cm), 36 (90 cm), 48 (122 cm), 60 (152 cm), 160 ID x.270 OD (4/7) micro tubing, weight and antileak device Model Nozzle Nozzle Nominal Diameter Misting Number Color Size Flow Rate PSI PSI PSI PSI PSI PSI PSI PSI PSI (feet) angle Black Green Brown Gray PERFORMANCE AT 6 (1.8M) HEIGHT PERFORMANCE AT 50 PSI (3.5 BAR), SINGLE HEAD Nozzle Colors Black Green Brown Gray Flow rates (GPH) Wetting diameter (feet) Rectangular spacing (ft x ft) 3 x 3 3 x 4 3 x 4 3 x 4 Application rate (in/h) PERFORMANCE AT 50 PSI (3.5 BAR), TWO WAY HEAD ASSEMBLY Flow rates (GPH) Wetting diameter (feet) Triangular spacing (ft x ft) 4 x 4 4 x 4 4 x 4 4 x 4 Application rate (in/h) PERFORMANCE AT 50 PSI (3.5 BAR), FOUR WAY HEAD ASSEMBLY Flow rates (GPH) Rectangular spacing (ft x ft) 4 x 4 4 x 4 4 x 4 4 x 4 Application rate (in/h) Sample Layout xx-0 Single fogger assembly on 1/2 FNPT base xx-12 4-way fogger assembly with 12 micro tubing, xx-24 4-way fogger assembly with 24 micro tubing, xx-36 4-way fogger assembly with 36 micro tubing, x Anti-leak device (low pressure) xx Micro tubing assembly with weight /2 FNPT base Foggers 2

3 MICRO SPRAYER SERIES 038 Designed for use in greenhouses, XX micro sprayers produce fine droplets and come in a wide range of flow rates. Ideal for maintaining conditions conducive to propagation and germination. An optional antileak device prevents dripping at the beginning and the end of each irrigation cycle, keeping the entire line pressurized. Use in germination, seeding and rooting in greenhouses and nurseries Use for overhead irrigation, propagation and cooling in greenhouses and nurseries Color coded nozzles for flow rate identification Modular design allows for a wide range of interchangeable components Suitable for upright and inverted position BENEFITS Maintains constant humidity or cooling in greenhouses High uniformity due to distribution accuracy and low precipitation rate Flow rates: 9-42 GPH (35 L/H L/H) Nominal flow rate: 29.4 PSI Wetting diameter: ( m) MODELS XX Operating pressure: PSI (1-2.4 BAR) Operating pressure for overlap irrigation: 35 PSI (2.4 BAR) Pattern: 340 Trajectory angle: approximately 1 Average droplet size:.0008 (0.2 mm) very fine at 45 PSI Filter requirements: 120 mesh (130 micron) up to 24 GPH, GPH 80 mesh (180 micron) xx-0 Micro sprayer on 1/2 FNPT base xx-12 Micro sprayer assembly with 12 micro tubing, xx-24 Micro sprayer assembly with 24 micro tubing, xx-36 Micro sprayer assembly with 36 micro tubing, Anti-leak device (low pressure) Anti-leak device (high pressure) xx Micro tubing assembly with weight /2 FNPT base HIGH UNIFORM BENCH CROP WATERING Inverted Propagation and Irrigation The tables below represent recommendations and solutions to achieve a high level of uniformity within a specific area. This spacing will achieve the best results with high coverage and uniformity, and can also achieve a lower system cost with higher efficiency. Step 1: Select the micro sprayer flow and application rate Step 2: Select the bench width Step 3: Select the micro sprayer spacing Based on this selection you can determine the application rate in inches per hour. ANTILEAK DEVICE DIG s antileak device is a water pressure valve which opens and closes instantly when pressure builds up. This action prevents the micro sprinklers or misters from dripping as a result of the gradual increase or decrease in water pressure when opening and closing the system. The antileak devise can be used with all DIG products. Greenhouse irrigation and misting systems Seedling and rooting systems Pulse irrigation to avoid air formation in the pipe and the time required for pressure to rise after each pulse Slope irrigation to prevent the overflow of water emptying the line when the water is shut off MODELS XX Low Application Rate, 6 Height, 1 Lateral Space Model # Bench Width Spacing CU 82% 80% LT. BLUE INCHES/HR % OF WATER 70% 87% CU 84% 84% VIOLET INCHES/HR % OF WATER 70% 72% High Application Rate, 6 Height, 3 Lateral Space Model # Bench Width Spacing CU 86% 85% 83% GRAY INCHES/HR % OF WATER 56% 58% 62% CU 85% 84% 81% GREEN INCHES/HR % OF WATER 61% 64% 67% CU 89% 89% 87% RED INCHES/HR % OF WATER 70% 72% 86% MODELS XX Pulse irrigation system to avoid air formation in the pipe and in each pressure rise in the system Prevents overflow drain from the lateral when water is shut off Material: Polyacetal body, silicon diaphragm and stainless steel spring Operating pressure: up to 65 PSI (4.5 BAR) Local head loss against arrow direction: 18 GPH, 0.7 PSI (70 L/H, 0.05 BAR) Local head loss against arrow direction: 28 GPH, 1.4 PSI (105 L/H, 0.10 BAR) Press fit connection from male or female side 3 Model Nozzle colors Lt. blue Violet Gray Black Green Red Brown Nozzle size Flow rates (GPH) Wetting diameter (feet) INVERTED AT 6 (1.80M) HEIGHT PERFORMANCE AT 20 PSI (1.4 BAR) Flow rates (GPH) Wetting diameter (feet) PERFORMANCE AT 25 PSI (1.7 BAR) Flow rates (GPH) Wetting diameter (feet) PERFORMANCE AT 30 PSI (2.1 BAR) Flow rates (GPH) Wetting diameter (feet) PERFORMANCE AT 35 PSI (2.4 BAR) Flow rates (GPH) Wetting diameter (feet) Rectangular spacing (ft x ft) 3 x 4 3 x 4 3 x 4 3 x 4 4 x 5 4 x 5 4 x 5 Application rate (in/h) Micro Sprayers Designed with a stainless steel spring for long lasting, uniform operation Can be connected to micro sprinkler, mister or fogger from either side Wide water passage for low maintenance Prevents damage to sensitive plants caused by dripping at the beginning and end of each irrigation cycle Opening Pressure Closing Pressure Opening Pressure Model Color (*PSI) (*BAR) (PSI) (BAR) (+ PSI) (+ BAR) PERFORMANCE (H) Black (L) Black X** Black *Arrow direction + opposite to arrow direction **Used with Series 500 fogger only The attachment of the antileak device to a micro sprinkler or fogger is by press fit design. The arrow mark indicates a male connection, the opposite direction indicates a female connection. Suitable for all micro sprinklers, sprayers and foggers High pressure antileak Low pressure antileak x Low flow antileak Antileak Device 4

4 TITLE MINI-COMPACT MICRO SPRINKLER SERIES 866 MODELS Description XX HIGH UNIFORM BENCH CROP WATERING MODELS XX Mini-compact model xx is a highly efficient micro sprinkler without a bridge, designed to irrigate in an inverted position for greenhouses. It can be connected directly to a lateral vine with or without an antileak device to prevent dripping at the beginning or at the end of each irrigation cycle, keeping the entire line pressurized. Suits all applications in irrigation and propagation Use in greenhouses and nurseries Trouble free operation even at low pressure Color coded specially designed nozzle with backup filter Firm compact construction without a bridge gives a complete 360 circle Modular design allows for wide range of interchangeable components Nozzle has a small backup filter for protection against penetration of dirt Made of durable materials ensuring resistance to most chemicals and fertilizers for long-lived trouble free operation BENEFITS Allows a large number of micro sprinklers to operate at the same time due to lower flow rate Uniform growth of root system due to optimal ratio of water in the soil Flow rates: 9-42 GPH ( L/H) Diameter of coverage: ( m) Operating pressure: PSI (1-2.4 BAR) Model Nozzle Color Lt. Blue Silver Blue Violet Gray Black Green Red Brown Nozzle size (inch) Flow rates (GPH) Wetting diameter (feet) PERFORMANCE AT 6 (1.8M) HEIGHT PERFORMANCE AT 20 PSI (1.4 BAR) Flow rates (GPH) Wetting diameter (feet) PERFORMANCE AT 25 PSI (1.7 BAR) Flow rates (GPH) Wetting diameter (feet) Rectangular Spacing (feet) 8 x 10 8 x x x x x x x 16 Application rate (in/hr) PERFORMANCE AT 30 PSI (2.1 BAR) Flow rates (GPH) Wetting diameter (feet) Rectangular Spacing (feet) 10 x x x x x x x x 18 Application rate (in/hr) PERFORMANCE AT 35 PSI (2.4 BAR) Flow rates (GPH) Wetting diameter (feet) Rectangular Spacing (feet) 10 x x x x x x x x 18 Application rate (in/hr) Operating pressure in overlapping irrigation: PSI ( BAR) Pattern: 360 Trajectory angle: approximately 5 Droplet size: medium Filter requirement: 120 mesh (130 micron) up to 24 GPH, GPH 80 mesh (180 micron) xx-0 Micro sprinkler on 1/2 FNPT base xx-12 Micro sprinkler assembly with 12 micro tubing, antileak device, xx-24 Micro sprinkler assembly with 24 micro tubing, antileak device, xx-36 Micro sprinkler assembly with 36 micro tubing, antileak device, Antileak device (low pressure) Antileak device (high pressure) xx Micro tubing assembly with weight /2 FNPT base The following tables represent recommendations and solutions to achieve a high level of uniformity within a specific area. This spacing will achieve the best results with high coverage and uniformity, and can also achieve a lower system cost with higher efficiency. Step 1: Select the micro sprinkler flow and application rate Step 2: Select the bench width Step 3: Select the micro sprinkler spacing Based on this selection you can determine the application rate in inch per hour. LOW Application Rate, 6 Height, 1 Lateral Space Model # Bench Width Spacing CU 93% 90% 88% LT. BLUE INCHES/HR % OF WATER 49% 55% 61% CU 91% 88% 86% SILVER BLUE INCHES/HR % OF WATER 60% 65% 86% Model # Bench Width Spacing CU 84% 83% 91% RED INCHES/HR % OF WATER 71% 75% 79% CU 87% 86% 85% 83% BROWN INCHES/HR % OF WATER 76% 80% 83% 86% LOW Application Rate, 6 Height, 4 or 6 Lateral Space Model # Bench Width Spacing CU 94% 92% 90% LT. BLUE INCHES/HR % OF WATER 67% 70% 74% CU 88% 86% 84% VIOLET INCHES/HR % OF WATER 75% 79% 82% LOW Application Rate, 6 Height, 10 Lateral Space Model # Bench Width Spacing CU 96% 95% 93% 91% 89% GRAY INCHES/HR % OF WATER 65% 68% 72% 75% 78% CU 90% 88% 86% BLACK INCHES/HR % OF WATER 75% 78% 81% LOW Application Rate, 6 Height, 14 Lateral Space Model # Bench Width Spacing CU 93% 93% 93% 92% GRAY INCHES/HR % OF WATER 69% 72% 75% 78% CU 94% 93% 92% 91% GREEN INCHES/HR % OF WATER 74% 77% 79% 82% CU 96% 94% 93% 92% RED INCHES/HR % OF WATER 73% 76% 78% 81% CU 89% 88% 88% BROWN INCHES/HR % OF WATER 72% 75% 77% HIGH Application Rate, 6 Height, 1 Lateral Space Model # Bench Width Spacing CU 90% 88% 86% 84% BLACK INCHES/HR % OF WATER 56% 62% 66% 71% CU 86% 84% 82% GREEN INCHES/HR % OF WATER 64% 68% 73% Model # Bench Width Spacing CU 85% 83% 81% RED INCHES/HR % OF WATER 71% 65% 79% CU 90% 89% 88% 87% 86% 85% 83% BROWN INCHES/HR % OF WATER 64% 68% 72% 76% 80% 83% 86% 5 Micro Sprinklers Micro Sprinklers 6

5 MINI SPRINKLER SERIES 700 Series xx mini sprinkler is an insect proof dynamic sprayer for under canopy irrigation with a full range of flow rates and excellent distribution uniformity. Suits all applications in the irrigation of seedlings, young saplings and mature trees Use in orchards, greenhouses and nurseries Press fit configuration for easy maintenance Head closes downwards after operation to prevent dirt and insects from entering the sprinkler (insect proof) Dynamic operation ensures self-cleaning and prevents accumulation of deposits, making it suitable for irrigation water containing iron and calcium Firm construction, without a bridge, gives a complete 360 circle Available on 1/2,10/32 FNPT or completely assembled on 13 spike with 24 or ID x.270 OD micro tubing Can operate inverted to reduce wetting diameter for young trees BENEFITS Low precipitation rate for any soil structure Can be used for frost protection and cooling Flow rates: GPH (40 L/H L/H) Diameter of doverage: 6-17 ( m) Operating pressure: PSI ( BAR) Operating pressure in overlapping irrigation: 35 PSI (2.4 BAR) Pattern: full circle 360 Trajectory angle: approximately 30 Droplet size: medium MODELS XX Filter requirement: up to 24 GPH 120 mesh (130 micron) 24 GPH and up to 80 mesh (180 micron) xx-0 Mini sprinkler on 1/2 FNPT base xx-24 Mini sprinkler assembly with 24 micro tubing, xx-36 Mini sprinkler assembly with 36 micro tubing, Press fit stake Micro tubing assembly Micro tubing assembly /2 FNPT base MINI-COMPACT MICRO SPRINKLER SERIES 861 MODELS XX & The mini-compact micro sprinklers present an advanced concept in micro irrigation systems. The mini-compact micro sprinklers unique drive mechanism achieves strong spinner propulsion at lower pressure. A small backup filter ensures extra protection, and also serves as a secondary nozzle, keeping the droplet size even and providing excellent distribution uniformity. Mini-compact micro sprinklers use interchangeable components with a large selection of nozzles suitable for applications in the irrigation of seedlings, young saplings and mature trees. Use in orchards, greenhouses and nurseries Can be used for frost protection and cooling Large water passage Head closes downwards after operation to prevent dirt and insects from entering the sprinkler (insect proof) Built-in filter Trouble free operation even at low pressure Strong spinner propulsion at low pressure Frame construction without a bridge allows a complete 360 circle Available on 1/2 FNPT, 10/32 thread or completely assembled on 13 spike with 24, 36 or ID x.270 OD micro tubing Made of durable materials, ensuring resistance to most chemicals and fertilizers The micro sprinkler has a small backup filter for protection Flow rates: 5 GPH - 42 GPH (20 L/H L/H) Diameter of coverage: (3.0 m m) Operating pressure: PSI (1-2.0 BAR) Pattern: 360 Trajectory angle: approximately 12 Droplet size: medium Filter requirement: minimum of 120 mesh (130 micron) xx-0 Mini-Compact sprinkler on 1/2 FNPT base xx-24 Mini-Compact sprinkler assembly with 24 micro tubing, xx-36 Mini-Compact sprinkler assembly with 36 micro tubing, Press fit stake Micro tubing assembly Micro tubing assembly /2 FNPT base Model Nozzle colors Silver Blue Gray Black Green Dark Blue Red Brown Nozzle size Flow rates (GPH) Wetting diameter (feet) PERFORMANCE AT 12 (30CM) ABOVE THE GROUND PERFORMANCE AT 25 PSI (1.7 BAR) Flow rates (GPH) Wetting diameter (feet) PERFORMANCE AT 30 PSI (2.1 BAR) Flow rates (GPH) Wetting diameter (feet) PERFORMANCE AT 35 PSI (2.4 BAR) Flow rates (GPH) Wetting diameter (feet) Rectangular spacing (ft x ft) 6 x 4 7 x 6 7 x 6 8 x 6 8 x 6 10 x 6 10 x 6 Application rate (in/h) Model Nozzle Color Olive Lt. Blue Silver Blue Violet Gray Black Green Red Brown Nozzle size Flow rates (GPH) Wetting diameter (feet) at 6 (1.8m) above the ground PERFORMANCE AT 15 PSI (1 BAR) Flow rates (GPH) n/a Wetting diameter (feet) n/a PERFORMANCE AT 20 PSI (1.4 BAR) Flow rates (GPH) n/a Wetting diameter (feet) n/a PERFORMANCE AT 25 PSI (1.7 BAR) Flow rates (GPH) Wetting diameter (feet) PERFORMANCE AT 30 PSI (2.1 BAR) Flow rates (GPH) Wetting diameter (feet) Rectangular spacing 5 x 7 12 x x x x x x x x 14 Application rate (in/hr) Mini Sprinklers Mini-Compact Micro Sprinklers 8

6 TITLE FLOW REGULATED MINI-COMPACT MICRO SPRINKLER MODELS Description XX TITLE COMPACT MICRO SPRINKLER SERIES 961 MODELS XX & Description P-32 The flow regulated mini-compact micro sprinklers are designed to achieve a consistent flow rate in areas with pressure fluctuations and in difficult topography. The flow regulated Mini-compact has a floating silicon diaphragm with a large water passage to regulate flow, and an integral filter attached to the nozzle to keep particles from entering the nozzle. The flow regulated Mini-compact micro sprinklers frame is constructed without a bridge ensuring a complete 360-degree circle for better uniformity. Systems with constantly changing pressures Slopes and locations with difficult topography Reduces cost due to smaller diameter pipe and longer laterals Stake has depth measurements imprinted for precise installation Integral filter to protect the regulating silicon disc from large particles Head closes downwards after operation to prevent dirt and insects from entering the sprinkler (insect proof) Press fit configuration for easy maintenance No misting Trouble free operation, even at low pressure Strong propulsion of the spinner at low pressure Frame construction without a bridge gives a complete 360 circle Standard assembly includes OD x.270 ID micro tubing, spike and barb Made of durable plastic materials ensuring resistance to most chemicals and fertilizers used in agriculture Pattern: 360 Flow rates: 7, 11 and 13.2 GPH ( BAR) Diameter of coverage: (4.8 m m) Operating pressure: PSI Trajectory angle: approximately 11 Droplet size: medium Model Nozzle Nozzle Flow Flow Diam. Diam. Size Color (GPH) (l/h) (ft) (m) Silver Blue Black Black Filter requirement: minimum of 120 mesh (130 micron) Micro sprinkler assembly, 7 GPH Micro sprinkler assembly, 11 GPH Micro sprinkler assembly, 13.2 GPH DIG s compact micro sprinklers are a low trajectory single stream micro sprinkler with a large diameter and insectproof housing. The compact, turbine mechanism produces smooth operation that ensures uniform water distribution necessary for overlapping irrigation. A durable, insectproof housing provides long lasting, trouble free operation. Available in two models with full or adjustable circle coverage, and is designed for use in a wide range of applications. Use in orchards, greenhouses and nurseries Use for frost protection and cooling Head closes downwards after operation to prevent dirt and insects from entering the sprinkler (insect proof) Modular design allows for a wide range of interchangeable components Built-in unique backup filter P-32 has an adjustable arc to any sector with easy adjustment Simple construction without spring or seals Available on 1/2 FNPT, 10/32 thread or completely assembled with 13 spike, or iron rod with 24 or ID x.270 OD micro tubing Diameter of coverage: Flow rates: GPH ( l/h) Operating pressure: PSI (2-2.4 BAR) Operating pressure in overlapping irrigation: 35 PSI (2.4 BAR) Maximum spacing for overlapping: up to 20 x 20 ft (6 x 6 m) Pattern: part circle , full circle 360 Trajectory angle: approximately 10 Single jet Droplet size: large Filter requirement: minimum of 60 mesh (220 micron) Micro sprinkler on 1/2 FNPT base Micro sprinkler on 1/2 FNPT base xx-24 Micro sprinkler assembly with 24 micro tubing, P-32 Micro sprinkler only P-xx-24 Micro sprinkler assembly with 24 micro tubing, Press fit stake Micro tubing assembly Micro tubing assembly /2 FNPT base FLOW (GPH) FLOW VS. PRESSURE PRESSURE (PSI) Model P Nozzle color Red Red Brown Nozzle size Flow rates (GPH) Wetting diameter (feet) AT 12 (30CM) ABOVE THE GROUND PERFORMANCE AT 30 PSI (2 BAR) Flow rates (GPH) Wetting diameter (feet) PERFORMANCE AT 35 PSI (2.4 BAR) Flow rates (GPH) Wetting diameter (feet) Rectangular spacing (ft x ft) 18 x x x 20 Application rate (in/hr) Micro Sprinklers Micro Sprinklers 10

7 MULTI-OUTLET PC DRIPPERS DIG s PC4-DA four outlet PC dripper assembly has even flow from all oulets using a long arrow stake with a labyrinth water passage. The four-oulet dripper can be used on pots, baskets and planter boxes with even uniformity from all outlets. The four oulet dropper assembly is available in.25,.5 and 1 GPH per outlet and can be used for both small and large systems. Color code dripper assembly for easy verification of flow rates The arrow stake assemblies deliver precise water distribution with different lengths of micro tubing Large water passage allows debris and particles to exit the outlet during routine operation Using stake, water is applied directly into the pot, reducing spots on the leaves and sparing the plant of disease The press fit assembly of the dripper and the four oulets allows easy system maintenance The pressure compensating feature enables the use of longer laterals with smaller diameters for lower cost of the system Constructed of UV resistant durable materials Flexible distribution tubing with.118 OD made of vinyl for easy installation and retrieval Material: polypropylene Flow rates:.25 GPH per outlet.5 GPH per outlet 1 GPH per outlet Operating pressure: PSI ( BAR) Filter requirement: 155 mesh FLOW RATE (GPH) FLOW RATE VS. PRESSURE PRESSURE (PSI) PC4-XDA PROPAGATION AC CONTROLLER Designed for irrigation and propagation in greenhouses and nurseries. Model 5006-IP AC controller has features such as watering durations in seconds or minutes and repeat watering cycles at selected times of the day. A flexible program and simple operation make the 5006-IP the ideal controller for propagation and cooling. APPLICATION Irrigation, propagation and germination Watering durations from standard irrigation to propagation from 1 second up to 12 hours in 1 second increments Watering windows can be programmed to last from 1 minute to 24 hours Rain delay up to 30 days Independent program for each valve (6-station) Can be programmed to serve a wide range of applications and provide flexibility in setting irrigation schedules Internal circuit board eliminates the need for fuses or a circuit breaker External 24 VAC transformer (included) SINGLE STATION PROPAGATION & IRRIGATION CONTROLLER Used for irrigation and propagation Automatic, semi-automatic and manual operation Used with Unimax S-305DC solenoids with internal manual bleed for ON/OFF operation, which mount on most brand name valves using one of seven valve adapters Irrigation suspension override (rain mode) Withstand harsh climatic conditions - rated IP68, the highest attainable code classifying the degree of protection against water intrusion (completely sealed and waterproof) Two mounting configurations including valve clip mounting and valve box wall mounting Powered by one 9-volt alkaline battery featuring low power consumption Program stored for up to 20 seconds during battery change Digital display blinking low battery indicator Latching solenoid with encapsulated plunger and spring for reliable operation 3 year warranty MODEL 5006-IP Duration: 1 second up to 12 hours, in 1 second increments Repeat watering cycle in 1 minute intervals with window to start at am or pm, and window to close at am or pm. Allows watering in short cycles during limited periods of the day or night WATERING SCHEDULES CAN BE SET ACCORDING TO 4 DIFFERENT PROGRAMS 1) Standard watering cycle: seven day calendar with 4 start times per day 2) Cyclical watering cycle: from every day up to once every 30 days 3) Repeat watering cycle: from 1 hour to 23 hours 4) Repeat watering cycle in one minute intervals with window to start at am or pm, and window to close at AM or PM MODEL 5006-IP DESCRIPTION AC six station MODELS 710.XXXP ELECTRICAL SPECIFICATIONS Power source: 9-volt DC (one 9-volt DC alkaline battery, not included) Battery life: up to 1 year Temperature range: 38 F to 130 F (3 C to 54 C) Solenoid: two-way magnetic latching, bi-directional pulse (included with ) Coil operating data: coil resistance 5 +/ Ω minimum pulse 10 ms duration at 7-9 volts Red + and white to latch open Red and white + to latch closed 11 Multi-Outlet Layout PC4-1DA PC 1 GPH drippers with press fit 4-outlet adapter PC4-2DA PC 2 GPH drippers with press fit 4-outlet adapter PC4-4DA PC 4 GPH drippers with press fit 4-outlet adapter /8 vinyl micro tubing with.118 ID x.187 OD for use with arrow stake /8 vinyl micro tubing with.118 ID x.187 OD for use with arrow stake /8 vinyl micro tubing with.118 ID x.187 OD for use with arrow stake Press fit 4-outlet adapter for PC dripper arrow stake with labyrinth water passage Multi-Outlet PC Drippers PROGRAMMING 7-day programming schedule or intervals from 5 minutes to 30 days in irrigation mode Four start times per day in irrigation mode Watering durations from 1 second to 1 hour in 1 second increments in propagation mode Up to 60 start times per hour with every 1, 5, 15, 30 minutes and 1 hour for any limited period of the day with specific time setup every day in propagation mode Monthly water budgeting from 10%-190% in 10% increments Rain delay up to 30 days P Controller with solenoid only P Controller on 3/4 in-line valve P Controller on 1 in-line valve P Controller on 1 1/2 in-line valve P Controller on 2 in-line valve Propagation Controllers 12

8 TITLE LEIT-2 & LEIT RC2 HANDSET Description ACCESSORIES 13 The LEIT-2 is a wireless irrigation control system that combines a controller and handset. The LEIT RC2 remote control handset communicates with up to 99 LEIT-2 controllers, or 198 valves, from 100 meters, line of sight. The RC2 remote has a large LCD display with sophisticated and intuitive icon-based software used to communicate with LEIT-2 controllers. All of the controllers operations are controlled via the RC2 remote handset. After installation, no further visits to the actual controller are required under normal conditions. LEIT RC2 handset can perform many functions, such as review status, check history reports, adjust budgeting, program rain delays and perform manual runs All power is provided by an internal photovoltaic module and microelectronic energy management system fueled by ambient light Upload and change programs for up to 99 controllers with up to 198 valves Multilingual software in English, Spanish, Italian, French, German and Portuguese Large liquid crystal display with user friendly icons for easy programming The two-way radio operating range of up to 100 meters (350 ft), line of sight. Radio frequency is in the ISM band MHz (868 international). CE and FCC certified Can reconnect via 99 saved addresses Default program if controller is not programmed: defaults to 5 minutes per day If programs are changed the user can review the changes and identify the handset that made the changes Manual run, to test or skip any valve Provides controller status on connection Client ID enables the user to have a unique identity code for their handset and controllers; This is a security feature, which locks out unauthorized users Diagnostic setting alerts the user when communicating with a controller that has a short or open valve and continues operating the second valve Program stacking feature prevents hydraulic overload Reports the controller s power level, alerts the user to low power via the status report Operates up to 2 Unimax S-305 solenoids that can be installed on most valves using model 30-XXX valve adapters Dedicated sensor input allows for a sensor connection promoting better water efficiency Electrical protection for up to 50 volts; resistant to damage from lightning and currents from power lines Non-volatile memory retains program integrity forever (excludes time and date) Built from tough, rugged material - resistant to harsh environmental conditions Environmentally friendly: Certified lead free, uses light as a source of energy Waterproof controller housing (not the handset) 3 mounting configurations: valve mounting, valve box mounting and column mounting PROGRAMMING 2 programs with 4 start times per program Run times from 1 minute and up to 5:59 hours in 1 minute increments 365 day calendar with leap year Custom programming with 7 day calendar or intervals of 1-30 days in odd/even or every day rotation Individual monthly water budgeting from % in 10% increments Programmable rain delay up to 99 days with auto restart Status Report provides various function information on the controller History Report for each valve verifies operating time for past and current month Month Off feature allows any month of the year to be inactive Permanent Events Off feature allows any 3 days of the year to be inactive; will override any programs that enter that time frame Global Stop command will turn off all valves within radio range ELECTRICAL SPECIFICATIONS Controller input: 0-100,000+ LUX. Normal operation requires average of 3000 LUX Controller output: 9-volt pulse Remote handset input: 12-volt DC Remote battery: rechargeable 3.6V Ni/MH LEIT-2 2 Station controller only LEIT RC2 Handset LEIT-2 Controller valve box dome attachment with 8 screws LEIT-2 Controller plastic column attachment LEIT-2 Controller valve clip attachment MCOL2S LEIT-2 Controller 46 cm (18 ) mounting column MCOL2L LEIT-2 Controller 86 cm (34 ) mounting column S-305DC DC Solenoid with internal bleed and manual override 6-9 volt DC Solenoid plastic adapter for Bermad 200 series, HIT 500 series, DOROT series Solenoid plastic adapter for Rain Bird DV, DVF, PGA, PEB, GB, EFB-CP, BPE, PESB, ASVF LEIT-2 & RC2 Handset PUNCHES & TOOLS STAKES & RODS MICRO TUBING ASSEMBLY Puncture tool Insertion tool All purpose tool Punch for 1/2 poly tubing, 2mm Punch for 1/2 poly tubing, 3mm Punch for 1/2 poly tubing, 4mm Punch assembly, 2mm Punch assembly, 3mm Punch assembly, 4mm 1/2 THREADED BASES /2 FPT thread base /2 FPT thread base /2 MPT thread base 800 PLUNGERS & BARBS /8 Tapered thread & plunger /32 Threaded base /4 Barb /4 Threaded base Plunger, 5/32 female Collar with barb Large plunger, 12mm Iron rod Iron rod Iron rod Press fit stake, Clip stake, Press fit stake, 13, color-red Clip stake, 13, color-red ADAPTERS Press fit adapter Press fit adapter with barb COUPLERS & INSERTS Coupler T Coupler T, two way Insert for iron rod, 4mm Insert for iron rod, 6mm xx 24, 36, 48 Micro tubing with.160 IDx.270 OD, barb only xx 24, 36, 48 Micro tubing with.160 IDx.270 OD, barb and collar xx 24, 36, 48 Micro tubing with.160 IDx.270 OD, barb and adapter to fit mini sprinklers and compact micro sprinklers Micro tubing assembly with 2 collars and weight xx 12, 24, 36 Micro tubing assembly with collars, barb and weight xx 12, 24, 36, 48 Micro tubing assembly with plunger, barb and weight COLLARS & PLUGS Large collar, 12mm Collar Plug Nipple 700 Accessories 14