J-Series High Pressure Regulators
|
|
|
- Nancy Wright
- 5 years ago
- Views:
Transcription
1
2 J-Series High Pressure Regulators The LowFlow J-Series consists of the JR Series, which are pressure reducing valves, and the JB Series, which are back pressure regulating valves. The J-Series regulators have the ability to handle very high pressures and very low flows.
3 LowFlow Regulator Matrix Model Description Function Max Inlet Max Set Max Cv Cv Options Sizes Sizing JB Diaphragm back pressure regulator BPRV 3, , 0.15, 0.25, /4", 3/8", 1/2" Charts JBDL Diaphragm operated back pressure regulator -Low Range BPRV 1, /2" LFCV JR Diaphragm pressure regulator PRV 4, , 0.08, 0.2 1/4", 3/8", 1/2" Charts JRC A JR with special gauge pattern for use on gas cylinders PRV 4, , 0.08, 0.2 1/4", 3/8", 1/2" Charts JRH Diaphragm pressure regulator - High Flow PRV 4, /8", 1/2" Charts JRHF Diaphragm pressure regulator - High Flow PRV , 1.9 1/2", 3/4", 1.0" LFCV JRPH Piston operated pressure regulator -High Range PRV 6,000 5, /2", 3/4", 1.0" LFCV JRPL Piston operated pressure regulator - Low Range PRV 6,000 1, /2", 3/4", 1.0" LFCV JRPH (1/4") Piston operated pressure regulator -High Range PRV 10,100 9, , 0.03, 0.07, 0.2 1/4" LFCV JRA Air loaded pressure regulator PRV 2, , 0.08, 0.2 1/4", 3/8", 1/2" Charts General Usage of Letters in Naming Conventions: J- Original Jordan J series designation B- Back Pressure BP- Back Pressure - Higher Flows (piston) BD- Back Pressure - Higher Flows (diaphragm) R- Pressure Regulator RP- Pressure Regulator (piston) L- Lower set points H- Higher set points <OR> Higher flow rates A- Air loaded
4 J Series High Pressure Regulators Proprietary Jorlon diaphragm material provides exceptionally long life Tested to more than 1 million cycles Barstock construction guarantees material integrity Alloys are readily available LowFlow Express Some J- Series regulators are available for next day shipment
5 JR Series The JR Series have the ability to handle very high pressures and very low flows. Typically used in research and sampling systems for corrosive and specialty gases. Typical applications include gas chromatography and flame ionization detectors. Inlet pressures up to 4000 psi.
6 JR Series Specifications Seat Type: PTFE, PEEK Sizes: 1/4", 3/8", 1/2" (DN8, DN10, DN15) End Connections: Threaded, Socket Weld, Flanged, others Body Materials: Stainless Steel, Hastelloy C, Monel, Alloy 20, other Cv (Kv): 0.012, 0.08, 0.20, (0,010, 0,07, 0,17) Setpoints: up to 750 psi (52 bar)
7 JR-A Series The JR-A is a dome loaded, pressure reducing valve. This is the perfect valve for applications where droop must be kept at a minimum. The LowFlow JR-A Series line of high pressure regulators has the ability to handle very high pressures and very low flows.
8 JR-A Series Specifications Seat Type: PTFE, PEEK Sizes: 1/4", 3/8", 1/2" (DN8, DN10, DN15) End Connections: Threaded (NPT), Socket Weld, Flanged Body Materials: Stainless Steel, Hastelloy C, Monel, Alloy 20, other Cv (Kv): 0.012, 0.08, 0.20, (0,010, 0,07, 0,17) Setpoints: Airloaded psi (1,7 to 52 bar)
9 JRH Series The JRH Series have the ability to handle very high pressures and very low flows. The Jorlon diaphragm contributes to extremely long service life by greatly reducing or eliminating diaphragm failure.
10 JRH Series Specifications Seat Type: KEL-F/ Viton Sizes: 3/8", 1/2" (DN10, DN15) End Connections: FNPT Standard, Others on Application Body Materials: Stainless Steel, Hastelloy C, Monel, Alloy 20, others Cv (Kv): 0.8 (0,69) Ranges: 2-10 psi (0,14-0,69 bar) to psi (5,2-31 bar)
11 JRH and JR Bodies JRH Body JR Body
12 JRHF Series The JRHF is a highflow, diaphragm operated, balanced trim regulator with a 1.9 Cv and PTFE soft seat.
13 JRHF Series Specifications Seat Type: PTFE Sizes: 1/2", 3/4", 1" (DN15, DN20, DN25) End Connections: Threaded (NPT), Socket Weld, Flanged, others Body Materials: Stainless Steel, Hastelloy C, Monel, Alloy 20, others Cv (Kv): 1/2, 1.5 (1,3) 3/4"-1" 1.9 (1,6) Setpoints: up to 150 psi (10 bar)
14 JRHF Series Features and Benefits 4 Spring Ranges allow set point optimization to minimize droop Rugged Jorlon- PTFE diaphragm will eliminate failures One piece diaphragm subassembly promotes quick, inline maintenance 32 rms Mechanical Finish- Standard Hex outlet difuser eliminates hydraulic flow forces from affecting diaphragm position, ensuring smooth, accurate control Balanced port design minimizes DP forces on the plug, maximizing stability regardless of supply pressure variation
15 JRC Series The JRC Series is ideal for corrosive and non-corrosive cylinder gas service. It maintains precise, accurate outlet pressure control. Inlet pressures up to 4000 psi.
16 JRC Series Specifications Seat Type: PTFE, PEEK Sizes: 1/4", 3/8", 1/2" (DN8, DN10, DN15) End Connections: Threaded (NPT), Socket Weld, CGA Body Materials: Stainless Steel, Hastelloy C, Monel, Alloy 20, others Cv (Kv): 0.012, 0.08, 0.20, (0,010, 0,07, 0,17) Setpoints: up to 750 psi ( up to 52 bar)
17 JRPH Series ¼ The 1/4" JRPH are piston operated pressure reducing valves with high pressure capability and ANSI Class VI shutoff.
18 JRPH Series ¼ Specifications Seat Type: PEEK, KEL-F Sizes: 1/4" (DN8) End Connections: Threaded, Socket Weld, Butt Weld, others Body Materials: Stainless Steel, Hastelloy C, Monel, Alloy 20, others Cv (Kv): 0.03, 0.7 (0,026, 0,06) Ranges: Up to 9135 psi (630 bar)
19 JRPH Series ½ -1 The JRPH Series are piston operated, balanced trim pressure regulators with high Cv's and soft seats for ANSI Class VI shutoff.
20 JRPH Series ½ -1 Specifications Seat Type: KEL-F Sizes: 1/2", 3/4", 1" (DN15, DN20, DN25) End Connections: Threaded, Socket Weld, Butt Weld, others Body Materials: Stainless Steel, Hastelloy C, Monel, Alloy 20, others Cv (Kv): 2.1 (1,81) Ranges: Up to 5800 psi (400 bar)
21 JRPH Product Features Large knob allows for easy adjustment. Three set ranges for each model with color coded springs All wetted materials are 316L stainless steel. Other materials available on application Elastomer seals with PTFE split ring backup seals used throughout Piston sensing for better regulation at higher pressures Soft KEL-F seat provides ANSI Class VI shutoff Balanced trim design allows for higher flows
22 JRPL Series The JRPL Series are piston operated, balanced trim pressure regulators with high Cv's and soft seats for ANSI Class VI shutoff.
23 JRPL Specifications Seat Type: KEL-F Sizes: 1/2", 3/4", 1" (DN15, DN20, DN25) End Connections: Threaded, Socket Weld, Butt Weld, others Body Materials: Stainless Steel, Hastelloy C, Monel, Alloy 20, others Cv (Kv): 2.1 (1,81)) Ranges: Up to 1160 psi (80 bar)
24 JRPL Product Features Large knob allows for easy adjustment. Three set ranges for each model with color coded springs All wetted materials are 316L stainless steel. Other materials available on application Elastomer seals with PTFE split ring backup seals used throughout Piston sensing for better regulation at higher pressures Soft KEL-F seat provides ANSI Class VI shutoff Balanced trim design allows for higher flows
25 Mark 6800HP Series A line of self-operated pressure regulating valves for use on high pressure industrial gas and liquid services to 3,800 psi (262 bar). The 6800HP features a balanced piston design for excellent stability even in high pressure drop situations.
26 MK6800HP/MK5800HP Higher Pressure Higher Setpoint Higher Flows MK6800HP MK5800HP
27 Mark 6800HP Series Seat Type: Stellite, Vespel, Teflon Sizes: 1/2" 1" (DN15 DN25) End Connections: Threaded, Socket Weld, Flanged Body Materials: 316L Stainless Steel, others Cv (Kv): 0.5 to 2.5 (0,4 to 2,1) Setpoints: psi (17,2-207 bar)
28 JB Series The JB Series back pressure regulating valves have the ability to handle very high pressures and very low flows. Top entry design facilitates in-line cleaning and maintenance.
29 JB Series Specifications Seat Type: PEEK Sizes: 1/4", 3/8", 1/2" (DN8, DN10, DN15) End Connections: Threaded (NPT), Socket Weld, Flanged, others Body Materials: Stainless Steel, Hastelloy C, Monel, Alloy 20, others Cv (Kv): 0.05, 0.15, 0.25, 0.35 (0,043, 0,13, 0,22, 0,30) Setpoints: up to 750 psi (up to 52 bar)
30 JBDL Series The JBPL Series are high Cv diaphragm sensed back pressure regulators. The most common applications are fuels, water, acids, liquids and gases.
31 JBDL Series Specifications Seat Type: KEL-F Sizes: 1/2" (DN15) End Connections: Threaded, Socket Weld, Flanged Body Materials: Stainless Steel, others Cv (Kv): 1.95 (1,66) Setpoints: up to 400 psi (up to 28 bar)
32 JBDL Series Features and Benefits Fine thread pitch for precision setpoint adjustments 32 rms Mechanical Finish- Standard Jorlon Diaphragm - Unsurpassed Life - Diaphragm sensing for better regulation Balanced Trim design allows for higher flows Optimized Internal Volume Inline removable plug/trim for quick cleaning and trim replacement Kel-F Soft Seat provides ANSI Class VI Shutoff
33 Mark 5800HP/5850 Series The Mark 5800HP/ Mark 5850HP Series are high pressure, back pressure regulators designed to maintain upstream pressure of gases and liquids. As lightweight products, both are well suited for applications where space and weight are at a premium. Inlet pressures up to 5000 psi (345 bar).
34 Mark 5800HP/Mark 5850 Series Specifications Seat Type: Teflon (standard), PEEK, Delrin Sizes: 1/2", 3/4", 1" (DN15, DN20, DN25) End Connections: Threaded, Socket Weld, Flanged Body Materials: 316L Stainless Steel, others Cv (Kv): 0.4 to 1.0 (0,34 to 0,86) Setpoints: psi (27,6-345 bar)
35 Applications Process gases Specialty gases Analyzers Lecture bottles Sampling systems R&D labs Pilot plants CNG Test consoles Hydrogen Instrumentation Inline point of use Gas cabinets
36 MK6800HP/MK5800HP Applications Off-shore platforms Air/gas separation units High pressure vessels Compressor skids Test stands High pressure hydraulic systems
37 Competitors Tescom GO Swagelok Parker Veriflo AP Tech Cashco Sensiflo
38
ABOUT US. LOWFLOW VALVE 3170 Wasson Road Cincinnati, OH USA LowFlowValve.com
Fractional Flow Control Valves Heavy Duty Control Valves (DN8 - DN50) Pressure Regulators Back Pressure Regulators Piston Operated Pressure Regulators Diaphragm-Sensed Pressure Regulators High Pressure
ABOUT US. LOWFLOW VALVE 3170 Wasson Road Cincinnati, OH USA LowFlowValve.com
Fractional Flow Control Valves Heavy Duty Control Valves (1/4" - 2") Pressure Regulators Back Pressure Regulators Piston Operated Pressure Regulators Diaphragm-Sensed Pressure Regulators High Pressure
JB Series. Gas Back Pressure Reducing Valves BACK PRESSURE REDUCING VALVE
JB Series Gas Back Pressure Reducing Valves BACK PRESSURE REDUCING VALVE The LowFlow JB Series line of back pressure regulators have the ability to handle very high pressures and very low flows. These
1/4" JRPH/JRPL Series
1/4" JRPH/JRPL Series Pressure Reducing Valves PRESSURE REDUCING VALVES The 1/4" LowFlow JRPH Series and JRPL Series are piston operated pressure regulators that offer excellent control at Cv's of 0.20
JRPH/JRPL Series. Pressure Reducing Valves. a division of Jordan Valve PRESSURE REDUCING VALVE JRPH & JRPL SERIES FLOW CONFIGURATIONS
a division of Jordan Valve JRPH/JRPL Series Pressure Reducing Valves PRESSURE REDUCING VALVE The LowFlow JRPH Series and JRPL Series are piston operated, balanced trim pressure regulators with high Cv's
JSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,
JSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,
JSBLF Series Compact, High Purity Low Flow Back Pressure Regulating Valve
JSBLF Series Compact, High Purity Low Flow Back Pressure Regulating Valve The JSBLF is a fully drainable compact back pressure regulator designed and built specifically for hygienic, ASME BPE low flow
Sanitary Valves JSB Series Back Pressure Valves
3L/T-2R/S33 Series JS Series Compact, High Purity ack Pressure Regulating Valve J-Pure is the first fully drainable compact back pressure regulator designed and built specifically for hygienic, ASME PE
Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
Mark 50 Series Self-Operated Back Pressure Regulators The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint. The spring in the Mark 50 holds
Control Valves & Regulators
Control Valves & Regulators Sliding Gate Valves Pressure Regulators Temperature Regulators Control Valves Positioners Jordan Valve sliding gate regulators and control valves are excellent choices for many
708MV Series Motor Valve
708MV Series Motor Valve FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708MV offers several advantages including extreme accuracy, high turndown ratios and repeatability. The features
Pressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated
Pressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated 1 Burling Valves Largest Cv per valve size - Possible smaller, more cost effective valve selections
Mark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available
Mark 60 Series Self Operated Pressure Regulators The Mark 60 Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark 60 holds the
JSRLF Series. Sanitary Valves JSRLF Series Low Flow Gas Reducing Valves
JSRLF Series Low Flow Pressure Reducing Valves for Bio, Pharma and High Purity Gas pplication The Steriflow JSRLF Series line of low flow pressure regulators have the ability to handle very high pressures
Mark 675 Series. Pressure Regulators Mark 675 Pressure Regulators. Self-Operated Pressure Regulators. Mark 675 Features
Mark 675 Series Self-Operated Pressure Regulators The Mark 675 Wafer Style Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications JSRLP is a high purity gas low pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. The JSRLP
Pressure Regulators K Series
www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator
Mark 908 Series. Pressure Regulators Mark 908X Piloted Blanketing Regulators
Pressure Regulators Mark 908X Piloted Blanketing Regulators Mark 908 Series 3/4" - 1" (DN20 - DN25) Low Pressure Blanketing (Gas overlay) PRV for medium to large Stainless and SUD vessels The Mark 908
Pressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated
a Proportion-Air brand Pressure Reducing, Differential and Back Pressure Regulating Valves Spring Loaded Dome Loaded Pilot Actuated 1 Burling Valves Largest Cv per valve size - Possible smaller, more cost
THE SLIDING GATE SEAT: A BETTER DESIGN
PRODUCT OVERVIEW THE SLIDING GATE SEAT: A BETTER DESIGN SIMPLE CONCEPT, SUPERIOR PERFORMANCE You will notice something different in a Jordan valve... the sliding gate seat. A remarkably simple concept
THE SLIDING GATE SEAT: A BETTER DESIGN
PRODUCT OVERVIEW THE SLIDING GATE SEAT: A BETTER DESIGN SIMPLE CONCEPT, SUPERIOR PERFORMANCE You will notice something different in a Jordan valve... the sliding gate seat. A remarkably simple concept
"Send a signal not a technician" Mark 95AA and Mark 95AAFT upgrade kits available for currently istalled MK95 regula- tors Air Loading a MK95AA:
Mark 95 Series Sanitary ir ugmented Back Pressure Regulators The Mark 95 with air augmentation () option offers the same line sizes, Cv choices, seats, low build up characteristics, and stability of the
Model BPS-09-Npt. Stainless Steel Back Pressure Bypass Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-09-Npt Stainless Steel Back Pressure Bypass Valve
Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing
Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
Pressure Regulators RHPS Series
Pressure Regulators Series 1 www.swagelok.com Pressure Regulators Series Pressure-reducing models Back-pressure models Spring-, dome-, and air-loaded 1/4 to 4 in. end connections Working pressures up to
708 Series. Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES. CRN Registration Number Available
708 Series Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708 was developed by Jordan Valve to provide the most accurate control available for fractional
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRS-09i-FLG In-Line Pressure Reducing Valve Spring diaphragm
Manual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 9000 Series DM9000
Instrument Valves and Manifolds
Instrument Valves and Manifolds Needle Valves Instrument Valve Orifice Block Valves Gauge Block Valves Block & Bleed Valves Integral Block & Bleed Valves Two Valve Manifolds Three Valve Manifolds Five
Mark 608BP Series. Pressure Regulators Mark 608BP Gas Pressure Regulators. Balanced Plug Gas Pressure Regulators. Features
Mark 608BP Series Balanced Plug Gas Pressure Regulators The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The selfcontained
FLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003
FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL
JSRLF Series. Low Flow Pressure Reducing Valves for Bio, Pharma and High Purity Gas Application
JSRLF Series Low Flow Pressure Reducing Valves for Bio, Pharma and High Purity Gas Application New Option! EPDM seat for low lockup and tight shutoff on no flow or deadhead blanketing applications The
Mark 608 Series. Pressure Regulators Mark 608 Gas Pressure Regulators. Gas Pressure Regulators. Specifications. CRN Registration Number Available
Mark 608 Series Gas Pressure Regulators The 1-1/2" and 2" size Mark 608 valves are for use on large tank blanketing applications or other low pressure gas regulation. In a tank blanketing application,
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05i-Npt Stainless Steel Inline High Pressure Relief
KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
Model PRH FLG. Stainless Steel 1500# Flange High Pressure Regulator (Reducing Valve) 21 Columbus Avenue Garfield, NJ 07026
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRH04-1500FLG Stainless Steel 1500# Flange High Pressure
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS05-600 FLG Back Pressure/Bypass Valve Flanged Stainless
SERIES 830T THREE WAY VALVE
SERIES 80T THREE WAY VALVE The series 80T three-way valve is designed for diverting service or mixing service applications. A diverting service valve takes common stream and splits it into two outlet ports.
Mark 6127 Series. Pressure Regulators Mark 6127 Series. Pressure Reducing Valves. Valve Features. Operation
Mark 6127 Series Pressure Reducing Valves The primary function of the Mark 6127 is to reduce a greater upstream pressure to a lesser, more manageable downstream pressure, operating without regard to either
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-05-NPT Stainless Steel Back Pressure Regulator Valve
Balanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Balanced and Multi-stage Trim Options for Spira-trol TM Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Balanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Mark 978 Series STERIFLOW. Sanitary Control Valve. Sanitary Valves Mark 978 Globe-Style Control Valve AVAILABLE FINISHES FEATURES APPLICATIONS
Mark 978 Series Sanitary Control Valve The Mark 978 Sanitary Control Valve Series is designed to meet the required specifications for sterile process control valves. The MK978 Series is suitable for a
Manual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 4600 Series 8700 Series
Mark 63/64 Series. Pressure Regulators Mark 63/64 Differential Pressure Regulators. Differential Pressure Regulators. Features
Mark 63/64 Series Differential Pressure Regulators The Jordan Mark 63 is designed to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure
Series 28 High-Pressure Spring-Loaded Regulator
Description Series 28 is a range of spring-loaded regulators that provide a flow of gas or liquid at controlled. The outlet is substantially unaffected by flow rate but it does drop slightly as the inlet
General Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
Mark 95 Series. Sanitary Valves Mark 95 Sanitary Back Pressure Regulators. Sanitary Back Pressure Regulators
Mark 95 Series CRN Registration Number vailable Sanitary Back Pressure Regulators The Mark 95 is available with a hard or soft seat and a variety of diaphragm and o-ring materials, making the valve well-suited
Flow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
pressure regulators Back Pressure Regulators
Back Pressure Regulators Index BP-3 Series 1 BP-6 Series 4 BP-8 Series 7 BP-8LF Series 10 CBP-3 Series 13 LB-1 Series 16 SBPR Series 19 BP-60 Series 22 BP-66 Series 25 GO Regulator 405 Centura Court PO
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05-FLG PRESSURE RELIEF VALVE FLANGED 150#, 300#,
Mark 5108 Series. Back Pressure Regulating Valves Mark 5108 Series. Back Pressure Regulating Valves. Valve Features. Operation
Mark 5108 Series Back Pressure Regulating Valves In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. The Mark 5108 is designed to do just that.
G4 Series. ...Extremely sensitive and accurate PILOT OPERATED PRESSURE REDUCING VALVES PRESSURE EQUIPMENT DIRECTIVE (PED) Adjusting Screw
G4 Series PILOT OPERATED PRESSURE REDUCING VALVES...Extremely sensitive and accurate The G4 pressure reducing valve is designed for use on steam, air and gases. It will maintain a constant outlet pressure
Manifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
Pressure reducing valves
Pressure reducing valves Pilot Operated 25 Series The Spirax Sarco 25-Series regulators are a versatile family of self-acting pressure regulators with control pilots and interchangeable main valves for
OAKLEAF INVESTMENT HOLDINGS 52 (Pty) ltd
REV. 04 04 14 OAKLEAF INVESTMENT HOLDINGS 52 (Pty) ltd is by contract the exclusive import agent and service provider in South Africa for various foreign specialist manufacturers of FIELD PROCESS MEASURING
In-line sampling system for representative sampling without process interruption
Sapro In-line sampling systems. DN 25-100 In-line sampling system for representative sampling without process interruption Features The Sapro sampling system ensures a true representative sample without
Packless Valves. Instrument / Analyzer Products. Catalog 4515/USA April 2006
Packless Valves Instrument / Analyzer Products Catalog 4515/UA April 2006 NV55 eries Catalog 4515/UA NV55 eries High Flow Diaphragm Valves Parker Hannifin Corporation s presents the NV55. The NV55 is an
I & M MK96 & MK96C. Ideal Installation. Start-Up. Maintenance PROTECT VALVES WITH LINE STRAINERS
**VIP** If you purchased your MK96 or MK96C Valve, or any stem repair component for this valve, after 9/7/08 - please see **VIP** assembly instruction change on page, middle-right, section. I & M MK96
CONTROL VALVES QUALITY, DEPENDABILITY, SERVICE. REPUTATION BUILT ON. Innovative Solutions
CONTROL VALVES REPUTATION BUILT ON QUALITY, DEPENDABILITY, SERVICE. www.cashco www.valtron.co.za com Get Consistent Quality By involving every employee in our ISO 9001:2000 Quality Assurance Program, you
9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
Mark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES
Mark 7 Series Sliding Gate Control Valves The MK7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve s advanced
Mark 95 Series. Sanitary Valves Mark 95 Sanitary Back Pressure Regulators. Sanitary Back Pressure Regulators. Features
Mark 95 Series Sanitary ack Pressure Regulators The Mark 95 is available with a hard or soft seat and a variety of diaphragm and o-ring materials, making the valve well-suited for virtually any sterile
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These
Product overview. Technical data
VALVES & CONTROLS ANDERSON GREENWOOD BLANKETING SYSTEMS The Complete Blanketing and Safety Valve System! Product overview Pad Valves Anderson Greenwood is a world leader in tank protection and blanketing.
Miniature Multimedia Valves
2 Inert Isolation PTFE 3-Way Solenoid Valve Series 1 The Series 1 diaphragm type valve has a low internal volume and rapid response time, which enables users to get readings quickly for their analysis.
Single Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
Jordan Control Valve Series
Jordan Control Valve Series JCVS Globe Style Control Valves Mark ED and ET Globe Style Control Valves The Mark ED and ET are single port, globe style bodies with composition or metal seats, and a balanced
Multi-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
Gauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features
V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim
General Specifications
General Specifications GS 22B01C53-01EN-A M-675, M-775 and M-678 5-Valve Manifolds for Natural Gas Differential Pressure INTRODUCTION The PGI 5-Valve manifolds are designed for natural gas service and
W SERIES 3-PIECE BALL VALVES
W SERIES 3-PIECE BALL VALVES In-Line repairable metal seated ball valves for industrial and process applications. Design Pressure Rating 3000 WOG Available In Sizes ¼ to 3/4 2250 WOG Available In Sizes
PBV. Threaded and Socketweld Ball Valves P.B.V.
PBV Threaded and Socketweld Ball Valves P.B.V. TABLE OF CONTENTS Overview...3 How to Identify PBV-USA Valves...4 Seat Materials...5 Materials/Parts/Dimensions/Weights Master Star - 5333/6333...6 Superstar
Mark 53/54 Series. Pressure Regulators Mark 53 Differential Back Pressure Regulators. Differential Back Pressure Regulators.
Mark 53/54 Series ifferential Back Pressure Regulators The Jordan Mark 53 maintains a constant differential between the inlet pressure and the pressure loaded on top of the diaphragm. It can be used for
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 107 The JAMESBURY brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 107 are manual assemblies consisting of the JAMESBURY FIRE-TITE
MODEL C-PRV PRESSURE REDUCING REGULATOR TECHNICAL BULLETIN C-PRV TB FEATURES CAUTION DO NOT APPLY IN CONTINUOUS STEAM SERVICE!
TECHNICAL BULLETIN C-PRV TB 1-95 MODEL C-PRV PRESSURE REDUCING REGULATOR The Model C-PRV* is a 316L SST self-contained pressure reducing regulator designed for liquid or gaseous fluids utilized in sanitary
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Angle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
Kerotest KM4AP & KM4TP Static Pressure Manifolds
Kerotest KM4AP & KM4TP Static Pressure Manifolds KM4AP KM4TP Product Brief The KM4AP and KM4TP are two-valve, block and bleed style manifolds. These manifolds are intended for static pressure applications
9400 Series. Top Entry Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
9400 Series Top Entry Valves STANDARDS eets ASE B16.5, B16.10, and B16.34, API 608, API 598, API 607 Rev. 5/ISO 10497 ASE Section 8 cover/body flange connection and bolting Wall thickness complies with
ANDERSON GREENWOOD. Flow Control. Anderson Greenwood Tank and Equipment Blanketing Systems. Pad Valves. De-Pad Valves. Total Flow Control Solutions
ANDERSON GREENWOOD The Complete Blanketing and Safety Valve System! Anderson Greenwood is truly the world leader in tank protection and blanketing. Anderson Greenwood has the experience and products to
TY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
3L/T-2P/Q33 Series 3 Way Ball Valves
3L/T-P/Q33 Series 3 Way Ball Valves A multi-port valve that will lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying
PCC Technova. Series "CPL" Cylindrical Valves. Full & Regular Port 1/2" - 6" A PCC Flow Technologies Company
PCC Technova A PCC Flow Technologies Company Series "CPL" Cylindrical Valves Full & Regular Port 1/2" - 6" FEATURES ISO mounting flange dynamic stem seals elastomer backing stem bearing cavity free design
MODEL 345 HIGH PRESSURE REDUCING REGULATOR TECHNICAL BULLETIN 345-TB FEATURES High inlet and outlet pressures; high pressure drops.
TECHNICAL BULLETIN 02-16 ISO Registered Company MODEL 345 HIGH PRESSURE REDUCING REGULATOR The Model 345 is a piston style, heavy duty, high pres sure reducing regulator that can include bal anced trim
R690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
1Valcor Scientific. Subminiature Teflon Valve. 2-Way, Normally Closed Solenoid Valve Model: SV20-1 APPLICATIONS FEATURES INTRODUCTION DESCRIPTION
1Valcor Scientific Subminiature Teflon Valve 2-Way, Normally Closed Solenoid Valve Model: SV20-1 APPLICATIONS Model SV20-1 is suitable for a broad range of light industrial applications, both new and retrofit.
In-line sampling system for representative sampling without process interruption
In-line sampling system for representative sampling without process interruption Features General application The Sapro sampling systems are designed to extract true, representative samples from process
MK508UBS Series. Back Pressure Regulator MK508UBS. Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction.
MK508UBS Series Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction The MK508UBS Series are spring loaded, direct-operated, pressure relief valves used downstream of pressure
Product Specification
Product Specification Pnuematic Actuated Industrial Valves Compact Globe Control valves Two-Way, Linear, Steel or Stainless Steel Body Valves for Process and Utility Applications Series: 58OO Sizes: 1/2
10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction
1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up
BULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.
BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting