Balanced and Multi-stage Trim Options for Spira-trol TM Two-port Control Valves
|
|
- Lora Jennings
- 5 years ago
- Views:
Transcription
1 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. Copyright TI-S-9 CH Issue Balanced and Multi-stage Trim Options for Spira-trol TM Two-port Control Valves Description The Spira-trol TM range of two-port valves is available with alternative trim options to make it possible to select a valve configuration to suit an individual application. This Technical Information sheet covers balanced and multi-stage trim options and should be used in conjunction with the appropriate valve Technical Information sheet. Pressure / temperature limits Please see the product specific Technical Information (TI) sheet for valve limitations. stage Low noise Page Low noise Pages 6 and 7 stage Parabolic Pages and Anti-cavitation Page Anti-cavitation Pages 6 and 7 Low noise Anti-cavitation Pages and stage Low noise Anti-cavitation Pages and Low noise Page 8 Low noise Page 8 Page of 9
2 Model availability stage parabolic This trim is available for the Spira-trol TM JE, JEA, KE, KEA and LEA only. Sizes DN, DN, DN6, DN8, DN, DN, DN, DN, DN and DN. Technical data Trim design Parabolic Metal-to-metal Class IV Leakage Soft seal Class IV % : Rangeability : Fast : Typical flow characteristic curves Flow % Travel DN to DN DN6 to DN mm mm Valve opening % DN to DN 7 mm Materials No. Part Material Cage gasket Reinforced exfoliated graphite Plug seal Graphite Cage retainer CF8M Plug and stem stainless steel / L stainless steel / L with stellite 6 facing Seat ring PTFE soft seat / PEEK soft seat / Full PEEK / stainless steel / L stainless steel / L with stellite facing Page of 9 TI-S-9 CH Issue
3 Kv (Cv US) values For conversion: Cv (UK) Kv x.9 stage parabolic (continued) Trim DN DN DN6 DN8 DN DN DN DN DN DN () () (7) () (9) (8) 7 () 8 (679) 7 (89) ( 6) () () (7) () (9) 6 () 9 (6) 6 (79) 78 (9) ( 7) () (8) (8) () () 87 () 7 () 8 (67) 7 (89) Reduction () (8) (8) () () 87 () () 6 (7) 78 (9) () () (9) () () (7) 7 (8) 8 (67) Reduction () () (9) () () (7) (6) 6 (7) (8) () (7) () (9) (68) 7 (8) Reduction (8) () (7) () (9) (68) (6) (88) (68) Reduction (88) (68) (88) Reduction (88) 8 () () 8 (88) 7 () 8 () 6 () 9 (6) 6 (79) 78 (9) ( 7) TI-S-9 CH Issue Page of 9
4 stage perforated trim Model availability This trim is available for the Spira-trol TM JE, JEA, KE, KEA, LE and LEA. Sizes DN, DN, DN, DN, DN, DN, DN6, DN8, DN, DN, DN, DN, DN and DN. Technical data Trim design Perforated Metal-to-metal Class IV Leakage Soft seal Unbalanced Class VI Balanced Class IV Rangeability : Typical flow characteristic curves Flow % DN to DN mm Travel DN6 to DN mm DN to DN 7 mm Valve opening % Anti-cavitation stage Low noise stage Low noise stage For DN to DN Anti-cavitation are only available unbalanced with parabolic plug Materials No. Part Material Anti-cavitation stage Cage gasket Reinforced exfoliated graphite Plug seal Graphite Cage retainer CF8M Plug and stem stainless steel / L stainless steel / L with stellite 6 facing Seat ring PTFE soft seat / PEEK soft seat / Full PEEK / stainless steel / L stainless steel / L with stellite facing Page of 9 TI-S-9 CH Issue
5 Kv (Cv US) values For conversion: Cv (UK) Kv x.9 stage perforated trim (continued) Trim DN DN DN DN DN DN DN6 DN8 DN DN DN DN DN DN (.6) (8) 8 (9) (7) 787 (99) (.6) () (7) 7 (8) 9 () (8) (7) (96) 6 (79) 89 ( 8) Reduction. (.9) (.6) () (8) (7) 9 () (9) 7 (8) (7) Reduction. (.9) (.6) () (7) (7) 9 () (9) 7 (8) (96) 6 (79) Reduction and.6 (.8). (.9) (.6) () (8) () () () 7 (8) Reduction.6 (.8). (.9) (.6) () (8) () () () 7 (8) Reduction and. (.)*.6 (.8). (.9) (.6) () 7 (87) (76) 6 (6) () 7 (8) Reduction and. (.6)*. (.)*.6 (.8) (.6) 6 (6) 7 (8) Reduction and. (.)*. (.6)*. (.)* (.6) 7 () () Reduction 6 and. (.)*. (.)*. (.6)* () 6 (6) Reduction 7 and. (.)*. (.)* 7 () Reduction 8 and. (.)* () * Only available in Anti-cavitation TI-S-9 CH Issue Page of 9
6 stage perforated trim Model availability This trim is available for the Spira-trol TM JE, JEA, KE, KEA, LE and LEA. Sizes DN, DN, DN, DN6, DN8, DN, DN, DN, DN, DN and DN. Technical data Trim design Perforated Leakage Hard facing Class IV Rangeability : DN to DN mm Travel DN6 to DN mm Typical flow characteristic curves Flow % DN to DN 7 mm Valve opening % Low noise stage Anti-cavitation stage Low noise stage Anti-cavitation stage Materials No. Part Material Cage gasket Reinforced exfoliated graphite Plug seal Graphite Cage retainer CF8M Plug and stem stainless steel / L with stellite 6 facing Seat ring L with stellite 6 facing / Full PEEK Page 6 of 9 TI-S-9 CH Issue
7 Kv (Cv US) values For conversion: Cv (UK) Kv x.9 stage perforated trim (continued) Trim DN DN DN DN6 DN8 DN DN DN DN DN DN () () (7) () (8) 8 () () 86 (6) (8) (8) (7) () (8) 8 () () () Reduction and () () () () () (8) 8 () () Reduction and (7) (7) () (8) 8 () Reduction and (.6) (.6) (.6) () () (7) () (8) Reduction and () (7) () Reduction and () (7) Reduction 6 and () TI-S-9 CH Issue Page 7 of 9
8 stage low noise trim Model availability This trim is available for the Spira-trol TM JE, JEA, KE, KEA,LE and LEA. Sizes DN, DN, DN, DN6, DN8, DN, DN, DN, DN, DN and DN. Low noise stage Low noise stage Technical data Trim design Perforated Leakage Hard facing Class IV Rangeability : Travel DN to DN DN6 to DN mm mm DN to DN 7 mm Typical flow characteristic curves Flow % Materials No. Part Material Valve opening % Cage gasket Reinforced exfoliated graphite Plug seal Graphite Cage retainer CF8M Plug and stem L with stellite 6 facing Kv (Cv US) values For conversion: Cv (UK) Kv x.9 Seat ring L with stellite 6 facing / Full PEEK Trim DN DN DN DN6 DN8 DN DN DN DN DN DN () () () () 78 (9) () 8 (8) (8) 8 (6) () () () () 78 (9) () 8 (8) 8 (6) 9 (9) Reduction and (7) (7) (8) 8 (8) (8) Reduction and () () () (8) 8 (8) Reduction and (.6) (.6) (.6) () () (8) Reduction and (.6) (.6) () () Reduction and () Page 8 of 9 TI-S-9 CH Issue
9 Spira-trol TM selection guide Valve size DN to DN DN Valve series Valve characteristic Type of flange Flow Body material Connections Stem sealing Seating Type of trim Trim balancing Bonnet type Bolting Finish J K L E F L J series -port control valve K series -port control valve L series -port control valve Blank EN A ASME (ANSI) Blank Flow under T Flow over N P H D B C T P G S W K S P P P A A Cast iron Carbon steel Stainless steel SG iron Alloy steel Screwed Socket Welded Flanged Butt Welded PTFE / Nitronic bush PTFE Graphite Bellows / Graphite secondary seals Bellows / PTFE chevron seals Bellows / Graphite seals stainless steel Full PEEK seat PTFE soft seat L stainless steel L with stellite 6 facing PEEK soft seat Standard trim Low noise cage stage Low noise cage stage Low noise cage stage Anti-cavitation cage stage Anti-cavitation cage stage U Unbalanced B Balanced S Standard E Extended high temperature S Standard H High temperature Blank Standard N ENP coating K E A T D K P B S S Series... Kvs (Cv) To be specified C v Connection type To be specified Flanged ASME Selection example: DN - K E A T D K P B S S. - Cv - Flanged ASME Available spares Balanced gasket set Parts, TI-S-9 CH Issue Page 9 of 9
Balanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBalanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSpira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationSPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves
Page 1 of 10 Cert. No. LRQ 0963008 ISO 9001 SPIR-TROL DN15 to DN100 LE, LF and LL Two-port Control Valves TI-P303-11 CH Issue 2 Description SPIR-TROL is a range of two-port single seat globe valves with
More informationSTERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4")
Page 1 of 17 Cert. No. LRQ 09608 ISO 9001 STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4") TI-P183-02 CH Issue 3 Description STERI-TROL 'S' series are
More informationBBV Automatic or Manually Actuated Boiler Blowdown Valves DN15 to DN65
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development improvement of the product, we reserve the right to change the specification without
More informationPF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
More informationSPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
More informationAEL5 Series Electric Linear Actuators for DN15 to DN100 Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBCV Blowdown Control Valves DN15 to DN50 (½" to 2")
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationTwo port valves. pneumatically actuated
Two port valves pneumatically actuated One valve - The Spirax Sarco range of KE valves and PN5000 and PN6000 pneumatic actuators are designed to give a comprehensive selection of control valves for use
More informationGlobe Control Valves
Globe Control Valves GLOBE CONTROL VALVES The modular, flexible option ABOUT GLOBE CONTROL VALVES The SPIRA-TROL and M-Series Globe Control valves are general purpose control valves that can be engineered
More informationM21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More information'C' Series Control Valves
3060050/3 IM-F12-31 CH Issue 3 'C' Series Control Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation and Commissioning 4. Maintenance
More informationM21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationM21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
More informationEL5600 Series Electric Actuators for DN15 to DN100 Valves
Page 1 of 5 TI-P358-07 CH Issue 8 Cert. No. LRQ 0963008 ISO 9001 EL5600 Series Electric s for DN15 to DN100 Valves Description The EL5600 series electric actuators are reversible having linear output.
More information½" to 4" (DN15 to DN100) LEA31 and LEA33 ANSI Control Valves Installation and Maintenance Instructions
00050/1 IM-P0-02 CH Issue 1 ½" to " (DN15 to DN100) LEA1 and LEA ANSI Control Valves Installation and Maintenance Instructions 1. Safety 2. Technical details. Installation and commissioning. Maintenance
More informationGLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
More informationSeries 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
More information21000 Series. Masoneilan * Valves. High-Performance Control Valves
GE Energy Masoneilan * Valves 21000 Series High-Performance Control Valves Optimum control performance for a wide range of automated process control applications Single-ported design configuration Advanced
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More information3. Installation and Commissioning 4. Maintenance 5. Spares
INSTLLTION ND MINTENNCE INSTRUCTIONS IM-P305-06 US November 2003 1/2" to 4" (DN15 to DN100) KE41, 43, 61, 63, 71 and 73 NSI Control Valves 1. Safety 2. Technical details 3. Installation and Commissioning
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationSeries 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationKOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
More informationSeries 2000 Top Guided Control Valve
Series 2000 Top Guided Control Valve Series 2000 Control Valve Series 2000 process Control Valves. Sturdy design with special service trims available for: Cavitation Control Noise Reduction Top entry construction
More informationSPIRA-TROL Two-port Control Valves EN Standard JE, JF and JL DN15 to DN200 and ASME Standard JEA, JFA and JLA ½" to 8"
3750100/1 IM-S24-61 CH Issue 1 SPIRA-TROL Two-port Control Valves EN Standard JE, JF and JL DN15 to DN200 and ASME Standard JEA, JFA and JLA ½" to 8" Installation and Maintenance Instructions 1. Safety
More informationForbes Marshall Control Valve. Operational Economy with Optimum Control
Forbes Marshall Control Valve Operational Economy with Optimum Control Forbes Marshall Control Valve The Forbes Marshall Control Valve provides excellent performance on steam, liquid and gas applications.
More information21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities
GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3
More informationVALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
More informationseamless, multiple layers, made of , option: Hastelloy and other materials Heating jacket (option)
General Data Series 6H Nominal Size / NPS (15) 25 / (1/2 ) 1 Nominal Pressure PN / ANSI 63250 / Class 6000 Characteristic equal perc. or Rangeability 40:1 Plug guide stem guided, option: double guided
More information3-port valves. pneumatically actuated
3-port valves pneumatically actuated Pneumatically actuated valves for quality and accuracy in fluid control The Spirax Sarco range of QL valves and pneumatic actuators are designed to give a comprehensive
More informationPN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves
Description The PN9000 series actuators are a compact range of linear actuators that are available in 3 diaphragm sizes for matching the requirements of valves at various differential pressures. Each actuator
More informationBaumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.
More informationGeneral Stem-Guided Control Valves
Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900
More informationCONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
More informationGeneral Stem-Guided Control Valves
Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900
More informationLTG3 Globe Control Valves Standard Trim
A Long Experience in Energy Equipment and one Goal: The Customer s Satisfaction. LTG3 Globe Control Valves Standard Trim Doc. num. G03STT rev.1 TABLE OF CONTENTS LTG3 - LTG3 LN - LTG3 DS : GENERAL FEATURES...
More informationGLOBE 2 WAY CONTROL VALVE SERIES - 110
ACAD/PVCT/PVCT - 1 GLOBE WAY CONTROL VALVE SERIES - 1 INTRODUCTION This type of Valve with its classic globe body shape, which reflects its name, uses the variable area generated between the plug and seat
More informationSERIES 830T THREE WAY VALVE
SERIES 80T THREE WAY VALVE The series 80T three-way valve is designed for diverting service or mixing service applications. A diverting service valve takes common stream and splits it into two outlet ports.
More informationDP143, DP143G and DP143H. Pilot Operated Pressure Reducing Valves with Cast Steel Bodies
Page 1 of 7 TI-P006-01 CH Issue 11 ISO 9001 Pilot Operated Pressure Reducing Valves with Cast Steel Bodies Cert. No. LRQ 0963008 Description The pilot operated pressure reducing valves have been manufactured
More informationBaumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
24000CVF and 24000SVF Valves Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the
More information41005 Series Control Valves. Specification Data CH /10
Putting You In Control Specification ata CH41005 11/10 41005 Series Control Valves Complete Line of Heavy uty, Balanced, Cage Guided, Globe Valves with Lo-dB Anti-Cavitation Capabilities resser Masoneilan
More information21000 Series Control Valves
GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 21000 Series Control Valves Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB * & Anti-Cavitation Capabilities Table of Contents
More informationEvery component precisely matched
Series 8B Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,
More informationUtmost Control Valves
Utmost Control Valves Index /Products Range and Type code /Control Valve Products Globe /Globe Valve G110, G150 G114, G154 G114 and G154 Series Bellows Sealing Control Valve G115, G155 G115 and G155 Series
More informationAEL5 Series Electric Linear Actuators for ½" to 4" Control Valves
s Description The AEL5 series electric actuators are reversible having linear output. Available types AEL5 actuators are available with 4 supply variants, 230 Vac (2-wire, single phase), 5 Vac, 24 Vac
More informationDP143, DP143G and DP143H. Pilot Operated Pressure Reducing Valves with Cast Steel Bodies
TI-P006-01 CH Issue 8 DP143, DP143G and DP143H ISO 9001 Pilot Operated Pressure Reducing Valves with Cast Steel Bodies Cert. No. LRQ 0963008 Description The DP143, DP143G and DP143H pilot operated pressure
More informationSTEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
More informationV1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features
V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim
More informationAEL5 Series Electric Linear Actuators for ½" to 4" Control Valves
Electric Linear s for ½" to 4" Control Valves Description The AEL5 series electric actuators are reversible having linear output. Available types AEL5 actuators are available with 4 supply variants, 230
More informationHELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
More informationHoneywell EN REV. 2 09/2014 Page 1 of 10 Specification
Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for
More information21000 Series. Masoneilan * Valves. High-Performance Control Valves
GE Energy Masoneilan * Valves 21000 Series High-Performance Control Valves Optimum control performance for a wide range of automated process control applications Single-ported design configuration Advanced
More informationSTEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
More informationDBOY Series Pneumatic Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
More informationEvery component precisely matched
Series 200 Every component precisely matched Powerful valve actuator 1 Most commonly used is the electric actuator series SHE as shown here. It is robust, provides a constant seating force and is cost
More informationMasoneilan* Series
Masoneilan* 21000 Series Top-Guided Globe Valve with Lo-dB*/ Anti-cavitation Capabilities Optimum control performance for a wide range of automated process control applications bhge.com 21000 Series Globe
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationSeries 240 Types PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve
Series 240 Types 3241-1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve ANSI version Application Control valves for PSA plants (Pressure Swing Adsorption) s NPS ½ to 6 Pressure rating
More informationW SERIES 3-PIECE BALL VALVES
W SERIES 3-PIECE BALL VALVES In-Line repairable metal seated ball valves for industrial and process applications. Design Pressure Rating 3000 WOG Available In Sizes ¼ to 3/4 2250 WOG Available In Sizes
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationPressure reducing valves
Pressure reducing valves Pilot Operated 25 Series The Spirax Sarco 25-Series regulators are a versatile family of self-acting pressure regulators with control pilots and interchangeable main valves for
More informationFASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
More informationCONTROL VALVES EURO CHLOR
CONTROL VALVES EURO CHLOR PHÖNIX Armaturen-Werke Bregel GmbH P +49 (5693) 988-0 F +49 (5693) 988-140 info@phoenix-armaturen.de www.phoenix-armaturen.de APPLICATIONS & DESIGN FEATURES FIG. NO. 350EC8-9
More informationPilot Operated Pressure Surplussing Valve with Cast Steel Body
Page 1 of 7 TI-P004-01 CH Issue 6 SDP143 ISO 9001 Pilot Operated Pressure Surplussing Valve with Cast Steel Body Cert. No. LRQ 0963008 Description The SDP143 is a cast steel pilot operated pressure surplussing
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationControl Valves Series 2000 Heavy Duty valve 2 way
Series 2000 Heavy Duty valve 2 way Technical data Size (DN) DN 15 150 Pressure rating PN16, PN40 ANSI 300 Connections Flanges UNI/DIN PN16, PN40 Flanges ANSI 300 Type sealing Metallic (Class IV - V), soft
More informationType 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
More informationAEL6 Series Smart Electric Actuators for DN15 to DN100 Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationNELES TRUNNION MOUNTED BALL VALVE SERIES D
NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationIntroduction. Globe and Angle Body Control Valves. In Line Valve provides Solutions to Flow Control
Introduction Globe and Angle Body Control Valves In Line Valve provides Solutions to Flow Control In Line Valve Globe Control Valves use the variable area generated between the plug and seat to control
More informationARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
More informationM21Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationTN2000 Series Pneumatic Piston Actuators for 6" and 8" SPIRA-TROL Series Control Valves
Description The TN2000 series pneumatic piston actuators are designed for use with 6" and 8" SPIRA-TROL control valves. There are three versions available: Single-acting (with spring), Double-acting (with
More informationSeries 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves
Product Specification PS100401 2010. 04 Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves for promotes more tightness and heavy duty control Series 3500 Control Valves Globe
More informationSeries 240 Pneumatic Control Valve Type DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA
Series 240 Pneumatic Control Valve Type 3241-1 DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA ANSI version Application Control valve for PSA plants (Pressure Swing Adsorption) (German: DWA) NPS ½ to 6 Pressure
More informationSERIES GU CONTROL VALVES GLOBE-SINGLE SEATED, TOP GUIDED
SERIES GU CONTROL VALVES GLOBE-SINGLE SEATED, TOP GUIDED Metso's Neles series GU single seated, top guided globe valves are economical high-performance control valves designed to provide the best possible
More informationKP-28 & KT-28 Two Way Control Valve Technical Manual
KP-28 & KT-28 Two Way Control Valve Technical Manual Features 1. Modulating and open/close functions with electric or pneumatic actuators and others for selection. 2. Compact design and trim structure
More informationBOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
More informationARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic
More informationPV4 and PV6 Piston Valves
Description The and are piston isolation valves that have been designed for use on steam, condensate and other liquid sytems. Available types: and Piston ¾" shown Screwed, butt weld and socket weld connections
More informationSeries W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
More informationARI-STEVI ANSI (NPS 1/2" - 2") with electric and pneumatic actuators Control valve in straightway form
with electric and pneumatic actuators Control valve in straightway form ARI-STEVI 440 - ANSI Pneumatic actuator ARI-DP 32-33 Reversible pneumatic actuator Actuator with rolling diaphragm Air supply pressure
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationARI-STEVI 440 / 441 DVGW type approval
ARI-STEVI 440 / 441 DVGW type approval Control valve in straightway form for combustible gases DIN-DVGW type approval DN 15-100 ARI-STEVI 440-G / 441-G for electric and pneumatic actuators DIN-DVGW type
More informationControl valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
More informationSeries 07 Single/Double Seated Globe Valves for ANSI (PN20-100) DIN/BS 4504 PN10-PN100
Technical Bulletin B-070 Series 07 Single/Double Seated Globe Valves for ANSI 150 600 (PN20-100) DIN/BS 4504 PN10-PN100 Series 07 Features General The Series 07 control valves has been developed to provide
More informationwith electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426
with electric and pneumatic actuators Control valve straight through with V-port plug DN 300-500 ARI-STEVI 425 / 426 Electric actuator AUMA SAR with LE Electric multiturn actuator capable of high closing
More information