Flexible Sprinkler Connector Braided & Unbraided

Transcription

1 Model: FX / FXU Technical Features Hose Types: raided or Unbraided Hose Lengths:, 6, 8, 60, 7 Maximum Working Pressure: 75 PSI Maximum Working Temp: 5 F K factor: ½ Outlet 5.6, ¾ Outlet 8.0 onnections: To branch line (inlet) via /5.mm NPT male thread onnections: To sprinkler (outlet) via ½ or ¾ 5mm or 0mm NPT female thread pprovals & Standards raided: UL, UL, FM 67 Unbraided: UL, UL Part Material Flexible Hose Nut Type 0 Stainless Steel S0 Gasket Seal Nylon 66 Silicon Zinc Plated Grade 00 Steel End & enter rackets L Square ar Zinc Plated Steel Grade 00 Steel K J E. Stainless Steel Flexible Hose. onnection Nut G. Sprinkler H. Steel ar F G H I. Inlet Nipple D. E. enter racket I. J. K. F. L. ranch Line Inches Outlet Size Inches ends Min end Sch. 0 Pipe Inches Outlet Size Inches ends Min end Sch. 0 Pipe / / / / / / / / / / / / / / / / / / / /

2 Model: FX / FXU Inlet Nipple NPT FX RIDED UL / FM REDUER 5.5 Length* Inlet Nipple NPT FXU UNRIDED UL REDUER 5.5 Length* * Other Reducer lengths vailible Suspended eiling T-ar Grid System STNDRDS OF OMPLINE UL standards for Flexible Sprinkler Hose with Fittings for fire protection service Item Stainless Steel Flexible Sprinkler Hose Steel Square ar 5 & 50 97mm End racket with Wing Nut enter racket D-Type / or / Reducer NPT 97mm End racket with Wing Nut FM class number 67 approved standard for Flexible Sprinkler Hose with Threaded Ends and Fittings. NFP Standard for the installation of sprinkler system. NFP D Standard for the installation of sprinkler systems in one and two family dwellings and manufactured homes. NFP R Standard for the installation of sprinkler systems in residential occupancies up to and including four stories in height. STM 65 Standards specification for the manufacture, performance, and testing of metal suspension systems for acoustical tile and lay-in panel ceilings. STM 66 Standards practice for installation of metal ceilings suspension systems for acoustical tile and lay-in panels.

3 Model: FX / FXU Metal Joist / Stud (Option ). Metal Stud End racket (Part# FX-E-MTL). Metal Stud ( hannel) Package Includes: () Stainless Steel Flexible Sprinkler Hose () Steel Square ar () End rackets () enter racket Metal Joist / Stud (Option ). End racket (Part# FX-E-97MM). Metal Stud ( hannel). -/ #0 Self-Drilling Sheet Metal Screw Package Includes: () Stainless Steel Flexible Sprinkler Hose () Steel Square ar () End rackets () enter racket Wood Joist / Stud. End racket (Part# FX-E-97MM). Wood Joist. -/ #0 Self-Drilling Wood Screw Package Includes: () Stainless Steel Flexible Sprinkler Hose () Steel Square ar () End rackets () enter racket

4 Model: FX Parts List FX-NPT-050 FX-NPT-075 FX-NPT-700 FX-NPT-900 Straight Reducer /" Outlet x 5-/ Length Straight Reducer /" Outlet x 5-/ Length Straight Reducer /" Outlet x 7 Length Straight Reducer /" Outlet x 9 Length FX-NPT-INL FX-S-5 Square ar - 5" FX-S-50 Inlet Nipple x -/8 NPT Square ar - 50" FX-90D-50 FX-90D-75 90º Degree Elbow Reducer /" NPT 90º Degree Elbow Reducer /" NPT FX-GSKT EPDM Gasket FX- enter racket DX--D enter racket D TYPE FX-E-97MM 97mm End racket FX-E-MTL STUD Metal Stud End rackets

5 Model: FX Installation Instructions *For STM 65 metal ceiling suspension systems installed in accordance with STM 66 standards. WRNING * Read and follow these installation instructions before attempting to install Fivalco products. * Installer must understand the purpose of these products with common standards of the industry for safety, and the consequences of improper product installation. * Wear safety glasses, hardhat, and foot protection during installation. * Failure to follow these instructions could cuase improper sprinkler operation, resulting in serious personal injury and / or property damage. * The flexible hose are not to be bent within.5 inches of the connection nut at both ends. SSEMLY INSTRUTIONS () Pipe side: pply PTFE thread seal tape or pipe joint compound to the tapered threads of the inlet nipple. () Flexible hose side: DO NOT use both pipe PTFE or pipe joint compund. Tighten the inlet nipple into branch line using pipe wrench. onnect the nut of flexible hose to the inlet nipple using a pipe wrench. DO NOT use PTFE or pipe joint compound on the inlet nipple at the hose side since there is already a seal gasket in place to seal the joint. Tighten the connection to a maximum torque of 5 ft-lbs/0 N*m. Too much torque may cause damage to the seal gasket.

6 Model: FX Installation Instructions *For STM 65 metal ceiling suspension systems installed in accordance with STM 66 standards. onnect the nut of the flexible hose to the outlet reducer. DO NOT use PTFE or pipe joint compound since on outlet reducer at the hose side since there is already a seal gasket in place to seal the joint. Tighten the connection to a maximum torque of 5 ft-lbs/0 N*m. TOO much torque may cause damage to the seal gasket. 5 5 Indentify the t-bar bracket assembly and confirm if all parts are in present: () end bracket at each side, () center bracket, () square steel bar. djust as necessary if the positions of the end brackets to match the length of the t-bar rails. 6 6 ttach the end brackets to the t-bar rails by loosening the wing nut and pushing in the end bracket into the t-bar rail. 7 7 Tighten the wing nut to a torque of ft-lbs/ N*m to secure end brackets to the rails.

7 Model: FX Installation Instructions *For STM 65 metal ceiling suspension systems installed in accordance with STM 66 standards. 8 8 djust the positions of the center bracket and the flexible hose to desired location. 9 9 Slide the outlet reducer into the center bracket. 0 0 With outlet reducer positioned inside the center bracket, grasp and firmly close the handle completely to secure the reducer in place. Optional: Tighten the wing nut to a torque of ft-lbs/ N*m.

8 Model: FX Installation Instructions *For STM 65 metal ceiling suspension systems installed in accordance with STM 66 standards. pply PTFE or pipe joint compound to the male threads of sprinkler. Install the sprinkler into the female threads of the outlet reducer by following sprinkler manufacturer s installation instructions. HRD-LID EILING JOIST / STUD SSEMLY INSTRUTIONS Metal Joist / Stud (Option ) Refer to instructions for STM 65 Metal eiling Suspension Systems and perform steps to. Slide the Metal Stud End racket ( FX-E-MTL) on each end of square steel bar, making sure the lip of the bracket engages the metal joist/stud. Tighten the wing nuts to a torque of ft-lbs/ N*m to secure to the metal joist/stud. Perform steps 8 to of the STM 65 Metal eiling Suspension Systems. Metal Joist / Stud (Option ) Refer to instructions for STM 65 Metal eiling Suspension Systems and perform steps to. Place the bracket assembly on top of the metal joist/stud, where the end brackets ( FX-E-97MM) are on the inner side of each metal joist/stud. Drill -/ inch long #0 self-drilling sheet metal screws () in the locations shown in the picture. Perform steps 8 to of the STM 65 Metal eiling Suspension Systems. Wood Joist / Stud Refer to instructions for STM 65 Metal eiling Suspension Systems and perform steps to. Place the bracket assembly on top of the wood joist/stud, where the end brackets ( FX-E-97MM) are on the inner side of each wood joist/stud. Drill -/ inch long #0 self-drilling wood screws () in the locations shown in the picture. Perform steps 8 to of the STM 65 Metal eiling Suspension Systems.