Industrial power brushes

Transcription

1 Industrial power brushes Catalogue 1

2 Industrial power brushes Table of contents General information 4 Filament materials and their application 5 The fast way to the best tool 6 Safety notes and dimensions Cutting speeds and recommendations for use 9 Information on processing stainless steel (INOX) 10 Well packed and presented 11 Cup and bevel brushes 12 Wheel brushes 17 Wheel brushes with arbor hole 21 Composite brushes 27 Shank-mounted brushes 32 Wheel brushes for burnishing machines 41 Catalogue 2

3 Industrial power brushes Table of contents INOX-TOTA 42 Miniature brushes 45 Tube brushes 4 Scratch brushes 53 Accessories 55 Burnishing machine/ drum grinder Machine tools Flexible shaft drive Micro motor Robot Power drill Straight grinder Angle grinder Manual application All tools and more information: Catalogue 3

4 TRUST BUE Industrial power brushes General information Industrial power brushes from PFER are top-quality tools for work on surfaces. PFER offers a wide range of high-quality brushes for professional work on a large variety of materials and for many different applications. PFER always has the right brush for any use, any application problem and any material. The quality of PFER tools has been certified according to ISO ong tool life due to PFER special wires with high flexibility and bending fatigue strength. High concentricity due to even distribution and secure fixing of the filament material. Optimum finishing result due to close matching of main body and visible trim length. PFER knotted wheel and bevel brushes are manufactured using a special production process. The special fixing of the brush knots significantly improves performance. Advantage: Greater efficiency due to 25 % longer tool life compared with conventional knotted brushes. Ordering note When ordering, please state the EAN or the complete description. Ordering example: RBU 3006/6 ST 0.20 Ordering example explanation: RBU = Wheel brush, crimped 30 = Brush dia. 06 = Filament width /6 = Shank dia. s ST = Filament material steel 0.20 = Filament material dia. F Customer support Your PFER representative can visit you to offer free and non-binding advice and will be happy to help resolve your application problem and answer any questions about using PFER brushes safely. Products made to order If you cannot find the solution for your particular application in our extensive catalogue range, we can produce brushes in premium PFER quality specifically for your application on request. Products that can be made to order include different wire thicknesses and qualities, arbor holes or threads and other dimensions. PFERVAUE Your added value with PFER Results from the PFER test laboratories as well as from the product tests by independent testing institutes prove: PFER tools offer measurable added value. iscover PFERERGONOMICS and PFEREFFICIENCY: As part of PFERERGONOMICS, PFER offers ergonomically optimized tools and tool drives that contribute to greater safety and working comfort, and thus to health protection. As part of PFEREFFICIENCY, PFER offers innovative, high-performance tool solutions and tool drives with outstanding added value. For more information on this topic, please refer to our brochure PFERVAUE Your added value with PFER. PFERERGONOMICS PFER VAUE Your added value with PFER PFEREFFICIENCY The fast way to the best tool To help you find the optimum tool for your needs easily, we have summarized the appropriate brushes for the most important applications on pages 6 to 7. ➊ Select the filament material The material that you are working with is key to determining the optimum filament material. Steel wire grey Stainless steel wire blue Plastic filament red Brass wire yellow Natural bristles brown ➋ Select the filament type The brushing effect you want determines which filament type to choose. ➌ Select the tool The application and geometry of the workpiece indicate the optimum brush. Industrial power brushes are mainly used for: eburring - Especially removal of secondary burrs produced by milling, grinding, turning or drilling Cleaning - erusting, descaling - Work on weld seams - Cleaning, removal of paint Structuring surfaces - Matt finishing, satinizing - Roughening Catalogue 4

5 Industrial power brushes Filament materials and their application Wire filament Crimped brushes (wavy wire): For work with particular requirements on the flexibility of the brushes, such as machining of highly contoured workpieces. Knotted brushes (straight wire): For work that requires aggressive brushing behaviour, such as work on weld seams. Filament material Temperature resistance Advantages/properties Steel wire (ST) up to 300 C Stainless steel wire (INOX) Stainless steel wire (INOX)/iamond (IA) up to 450 C PFER special wire with high tensile strength and bending fatigue strength. Guarantees long tool life, even when used for extreme brushing applications. Wire quality (V2A): stainless; does not leave corroding residues on the workpiece. Used with low rotational speeds, compared to steel wire. PFER brushes with INOX filament are usually degreased. Particularly well suited to applications that place particular demands on the aggressiveness of the brush. Primarily used on materials with high material strength. Further information about working with stainless steel (INOX) can be found on page 10. Brass wire (MES) up to 10 C Wire quality CuZn37: brass wire is softer than steel wire. It is non-sparking and produces fine surface finishes. Plastic filament Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. Round filament: for applications that place particular demands on the flexibility of the brush. Rectangular filament (REC): for applications that place particular demands on the aggressiveness of the brush. Recommendation for use: Use coolant for applications where large amounts of heat are produced. Filament material Temperature Advantages/properties resistance Silicon carbide (SiC) Aluminium oxide (AO) Ceramic oxide grain (CO) iamond (IA) Nylon up to 220 C Particularly well suited to deburring work and for improving surfaces. ess sharp-edged and aggressive compared with SiC. Primarily suitable for polishing and smoothing for finishing on soft metals. Offers good toughness and excellent sharpness. For high stock removal values and aggressive brushing behaviour. Particularly well suited to applications that place particular demands on the aggressiveness of the brush. Primarily used on materials with high material strength. Particularly suited to working with materials that would otherwise be scratched or damaged, e.g. soft plastics. Natural bristles (animal hair) Primarily suitable for light cleaning and dust removal, as well as for polishing (in combination with polishing pastes). Filament material Temperature resistance Advantages/properties White (SBW) and black (SBS) bristles up to 150 C Goat hair (ZHW) Bristles are harder and less flexible than brushes with goat hair filaments. Goat hair is more flexible and softer than bristle. Selecting the filament material Filament material Steel Stainless steel (INOX) Aluminium Material that can be worked Non-ferrous metals Cast iron Plastics Soft non-ferrous metals Brass, copper, zinc Hard non-ferrous metals Titanium, bronze, nickel-based and cobalt-based alloys Steel wire (ST) l l l l - - iamond (IA) l l l Brass wire (MES) l Silicon carbide (SiC) l l l - l l Aluminium oxide (AO) l - - Ceramic oxide grain (CO) l - l l - iamond (IA) l l l Nylon l Bristle and goat hair (with polishing paste) l l l l l l l l = highly suitable = suitable - = not suitable Catalogue 5

6 Industrial power brushes The fast way to the best tool Materials that can be worked Filament material Filament type Steel, cast iron, plastics Steel wire (ST) Colour code: grey Stainless steel (INOX), aluminium, other non-ferrous metals Colour code: blue esired effect Weld seam knotted crimped encapsulated knotted Aggressive brushing effect, less flexible ight brushing effect, flexible Very aggressive brushing effect, not flexible Aggressive brushing effect, less flexible RBG p RBG PE p HBU p. 53 HBK p. 53 RBV p. 39 RBG p RBG PE p Structuring surfaces RBU p RBU SC p. 17 WBU p. 41 Edge deburring KBG p RBG p RBG p. 40 KBU p. 15, 37 RBU p. 17, 22, RBU p. 3 RBU p. 47 RBV p. 39 KBG p RBG p RBG p. 40 Surface deburring TBG p TBU p. 12 TBU p. 36 TBG p Interior deburring PBG p. 35 PBU p PBU p. 45 TBU p. 46 IBU p. 4, 50, 52 PBV p. 33 PBG p. 35 Surface cleaning TBG p KBG p RBG p TBU p. 12 KBU p. 15, 37 RBU p. 3 HBU p. 53 TBG p KBG p RBG p RBG p. 40 RBU p RBG p. 40 Interior cleaning PBG p. 35 PBU p PBU p. 45 TBU p. 46 IBU p. 4, 50, 52 PBV p. 33 PBG p. 35 Polishing Catalogue 6

7 Industrial power brushes The fast way to the best tool Stainless steel (INOX), aluminium, other non-ferrous metals Colour code: blue Steel, stainless steel (INOX), aluminium, non-ferrous metals, titanium, cast, plastics, wood Plastic filament (SiC, CO, nylon) Colour code: red Brass, copper, other non-ferrous metals Brass wire (MES) Colour code: yellow Steel, stainless steel (INOX), non-ferrous metals, cast iron Natural materials Colour code: brown crimped crimped crimped crimped ight brushing effect, flexible Grinding brushing effect, ight brushing effect, flexible ight brushing effect very flexible (use with polishing pastes) HBU p. 53 HBK p. 53 HBU p. 53 RBU p. 17, 22, WBU p. 41 RBU p , 26 RBUP p WBU p. 41 KBU p. 15, 37 RBU p. 22, RBU p. 3 RBU p. 47 RBU RBUP p , p RBU p. 39 RBU p. 47 RBU p. 3 RBU p. 47 TBU p. 12 TBU p. 36 TBU p. 12 BU p TBU p. 36 PBU p PBU p. 45 TBU p. 46 IBU PBU p. 4, 50, p PBU p. 45 TBU p. 46 IBU p. 4, PBU p. 32 PBU p. 45 TBU p. 46 IBU p. 4, 50, 52 TBU p. 12 KBU p. 15, 37 RBU p. 3 HBU p. 53 TBU p. 12 RBU RBUP BU p , p p RBU p. 3 HBU p. 53 RBU p. 17, 22, TBU p. 36 RBU p. 39 PBU p PBU p. 45 TBU p. 46 IBU PBU p. 4, 50, p PBU p. 45 TBU p. 46 IBU p. 4, PBU p. 32 IBU p. 4, 50, 52 PBU p. 45 TBU p. 46 RBU p. 47 PBU p. 45 TBU p. 46 Catalogue 7

8 Industrial power brushes Safety notes and dimensions PFER safe tools are our speciality PFER industrial power brushes meet a high standard of quality and safety, which is constantly monitored and further developed in our own laboratories. As one of the leading manufacturers of brush tools, PFER fulfils the requirements of European standard EN 103. Guidelines on the safe and economic use of PFER brushes are supplied with every packaging unit. They help you to increase your level of personal work safety. Safety notes: = Wear eye protection! = Wear hearing protection! = Wear a dust mask! = Wear gloves! = Read the safety notes! = Use a protective machine cover! Maximum permitted rotational speed In order to guarantee operating safety, the maximum permitted rotational speed indicated on the brush, label and in this catalogue must never be exceeded! Please refer to our product information and product tables for further recommendations regarding optimum operating speeds. These give details of the recommended rotational speeds [] for an optimum working result. Brush diameter In the case of hand-held tool drives, the brush diameter should never exceed 10 mm, regardless of the filament material. Minimum arbor hole diameter according to EN 103 Brushes must comply with the minimum arbor hole diameters ( A ) listed below, depending on their total diameter (). Total dia. of the brush Minimum arbor hole dia. A Explanation of dimensions F H R WA W B A M AM C T S F S WF C Abbreviation Unit escription mm Nominal outer diameter of the brush or the working surface for end brushes A mm Hole diameter AM mm hole diameter in main body C mm diameter of the main body F mm Nominal dimension of the filament material (wire thickness) M mm iameter in hole area S mm Shank diameter in shank-mounted brushes, shaft diameter for wheel brushes for burnishing machines, stem diameter (core) for pipe brushes T mm Nominal thread designation H mm Nominal total height (incl. components for arbor hole or thread as well as shank) mm Nominal total length for end brushes (without guide pins) and pipe brushes S mm Usable length for shank or stem, total length of the mounting shaft, usable thread length mm Nominal length of the filament material (free length of the filament material) R mm Total length of the filament material (free length without bridle) W A mm Width of the main body at the hole / thread W B mm Installation width, widest point of the main body mm Nominal dimensions of the working width F Catalogue

9 Industrial power brushes Cutting speeds and recommendations for use etermining the recommended rotational speed ➊ Select brush type. ➋ Read the recommended cutting speed. ➌ etermine the rotational speed using the ➊ Brush type ➋ Cutting speed brush diameter and cutting speed. End brushes 5 15 m/s The recommended cutting speed ranges [m/s] Cup brushes m/s depend on the respective application and lie Shank-mounted wheel below the maximum permitted cutting speed. brushes m/s Wheel/bevel brushes with arbor hole/ threaded See diagram below ➋ Recommended cutting speed [m/s] for wheel/bevel brushes with arbor hole/threaded Application [m/s] eburring/ edge breaking Removal of scale/ mill scale Cleaning/ roughening of surfaces knotted crimped knotted knotted crimped m/s m/s m/s m/s m/s m/s m/s m/s m/s m/s m/s m/s m/s knotted m/s Weld dressing m/s crimped m/s The colour bars correspond to the colour codes of the filament materials (see page 4). ➌ Recommended rotational speeds [] n Brush dia. [] , , , , , , , , , , , , , , , , , Example: 10, RBG ST 12, Cleaning surfaces 14, Brush dia. : 115 mm 16, Cutting speed: 39 m/s 20, Rotational speed: 6,500 22, dia. () x π x rot. speed (n) Cutting speed (v) = 25, ,000 x 60 Contact pressure and working position Incorrect (1) Correct (2) Only use the wire tips (Fig. 2). Exception In the case of brushes with plastic filament material, it is not only the wire tips that can be used, but 2 3 mm of the filaments. In the case of stationary brushes, machining should be carried out under the middle of the brush (see Fig. 2). Visible trim lengths Short visible trim lengths give a stiffer trim surface, resulting in more aggressive brushing action. onger trim lengths are more flexible, giving a softer brush performance that produces a more uniform finish, even on irregular surfaces. Self-sharpening effect The self-sharpening effect can be improved during use by changing the brush operating direction. Filament diameters Thick filament An aggressive brushing effect with a coarse surface finish, as fewer wire tips are in contact with the surface of the workpiece at the same time. Thin filament A soft brushing effect with a fine surface finish, as many wire tips are in contact with the surface of the workpiece at the same time. A longer tool life for the brush due to the higher level of flexibility of the filaments. Solutions to problems Problems Inadequate brushing effect Brushing effect too great Surface is too finely polished and shiny Surface is too rough and irregular Secondary burr formation Possible solutions Increase rotational speed or use larger brush diameter at the same rotational speed. Choose a brush with shorter trim length. Use a brush with thicker filaments. Reduce rotational speed or use smaller brush diameter at the same rotational speed. Reduce the contact pressure. Choose a brush with longer trim length. Use a brush with thinner filaments. Use a wider brush. Use a brush with thinner filaments. Increase the rotational speed. Use a brush with thicker filaments. Choose a brush with shorter trim length. Reduce the rotational speed. Change the working position of the brush in relation to the workpiece. Choose a brush with shorter trim length. Use a brush with thicker filaments. Catalogue 9

10 Fine grinding and polishing tools Industrial power brushes Information on processing stainless steel (INOX) Expertise in working with stainless steel (INOX) PFER offers an extensive range of tools that meets the demands of working with stainless steel (INOX). PFER tools for use on stainless steel TRUST BUE INOX The PRAXIS brochure PFER tools for use on stainless steel (INOX) contains much valuable information on material properties and application recommendations. PFER wire qualities In order to fulfil the particular requirements for working with stainless steel (INOX), PFER uses wire quality (V2A) for all INOX brushes. Practical experience from industry has shown that this offers excellent corrosion resistance with an optimum tool life. All PFER brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. INOX and magnetism The wire quality tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. AISI Code acc. to EN Material no. acc. to EN X5CrNi (V2A) 301 X10CrNi (V2A) 316 X5CrNiMo (V4A) 316 X3CrNiMo (V4A) 316Ti X6CrNiMoTi (V4A) INOX-TOTA brushes For extremely difficult operating conditions, PFER offers a range of "INOX-TOTA" (IT) brushes. These are characterized by the fact that all parts of the brush are made of stainless steel in quality (V2A), which ensures optimum corrosion protection. etailed information and ordering data can be found on pages Recommendations for avoiding corrosion Cause of corrosion Change in the microstructure due to too much heat build-up. Contact between the workpiece and the parts of the brush that are made of steel. Mixture of work on steel and stainless steel (INOX). Wire particles are introduced into the surface (crevice corrosion). Stock removal rate is too low. Solution Avoid heat build-up through: ower rotational speed Reduced contact pressure Oscillating brushing Use INOX-TOTA type brushes. Avoid contact between the face plates and workpiece. Use end brushes with plastic protection. o not use brushes that have already been used to work on steel, copper or other metals. o not work on steel in the vicinity of stainless steel (INOX) applications. Avoid a high contact pressure. Use a low rotational speed. Removal of deep structural changes by: Extending the brushing time Using grinding tools Note: To avoid possible problems, it makes sense to run preliminary tests to check the corrosion resistance of the workpiece. General cleaning of the workpieces after brushing is recommended in order to prevent loose particles sticking to the workpiece. 4 For workpieces that are used in a heavily corrosive environment, processing with grinding tools and etching or passivation is recommended. This also applies when not only stainless steel (INOX) but also non-alloyed steels are processed and it cannot be completely ruled out that abrasion particles will land on the stainless steel. For detailed information and ordering data for fine grinding and polishing tools, please see catalogue section 4. Catalogue 10

11 Industrial power brushes Well packed and presented Industrial packaging PFER provides industrial brushes in industrial packaging as standard. This symbol indicates all brushes in industrial packaging (). Robust, damage-resistant packaging. label containing all the important information such as item number, description, EAN code and technical details. Information on safe use of brushes included in each packaging unit. POS packaging PFER provides wheel, cup, end and bevel brushes in sales-boosting individual packaging. Individually packed shank brushes are supplied in a practical cardboard box. 10x 1 This symbol and the addition of "POS" in the description are used to indicate all brushes in POS packaging. An overview of all brushes in POS packaging is available here: Functional European standard hole mounting for optimum product presentation on the sales wall. label containing all the important information such as item number, description, EAN code and technical details. Product is easily recognizable through the viewing window. PFERTOO-CENTER You will find all the important information required in order to select the most appropriate tool on the PFER TOO-CENTER. Your local retailer or PFER sales representative will be glad to answer any questions you might have. To find an expert PFER retailer near you, visit: label The packaging label provides all the important information: item number, description, EAN code and technical details. Quick identification of the key product features due to symbols. Information on safe and optimum use of the brush. Filament material unit Tool type PFER description Technical information Catalogue 11

12 Threaded cup brushes crimped T TBU Excellent for medium-duty brushing such as deburring, cleaning and derusting on large surfaces. Highly flexible, enabling optimal adjustment to the workpiece contour. Creates fine surfaces. For optimum results, use on speed-adjustable angle grinders. For the 5-piece packaging unit, please specify the description without POS. T F 1 5 escription Steel wire (ST) M14x ,300 9,400 12,500 POS TBU 60/M14 ST 0, M14x ,300 9,400 12,500 POS TBU 75/M14 ST 0, M14x ,300 6,400,500 POS TBU 100/M14 ST 0,30 All INOX brushes are degreased M14x ,000,100 12,500 POS TBU 60/M14 INOX 0, M14x ,000,100 12,500 POS TBU 75/M14 INOX 0, M14x ,400 5,500,500 POS TBU 100/M14 INOX 0,30 Silicon carbide (SiC) plastic filament M14x ,400 3,900 6,000 POS TBU 100/M14 SiC 120 1,00 Catalogue 12

13 Threaded cup brushes knotted TBG Aggressive brush. Excellent for heavy-duty brushing such as deburring, cleaning and derusting on large surfaces. Aggressive brushing effect due to the very For the 5-piece packaging unit, please stiff wire knots. specify the description without POS. IA type brushes are supplied with 1 piece per PU. For optimum results, use on powerful angle Grit size IA 270 = 64, grinders. grit size IA 400 = 46 T T F Knots [pcs.] 1 5 escription Steel wire (ST) M14x ,300 12,500 12,500 POS TBG 65/M14 ST 0, ,300 12,500 12,500 POS TBG 65/M14 ST 0, ,300 12,500 12,500 POS TBG 65/M14 ST 0, M14x ,000 10,000 10,000 POS TBG 0/M14 ST 0, M14x ,500 9,000 9,000 POS TBG 100/M14 ST 0,50 All INOX brushes are degreased M14x ,000 12,500 12,500 POS TBG 65/M14 INOX 0, ,000 12,500 12,500 POS TBG 65/M14 INOX 0, M14x ,000 10,000 10,000 POS TBG 0/M14 INOX 0, ,000 10,000 10,000 POS TBG 0/M14 INOX 0, M14x ,600 9,000 9,000 POS TBG 100/M14 INOX 0, ,600 9,000 9,000 POS TBG 100/M14 INOX 0,50 iamond (IA) M14x ,000 2,400 9,000 TBG 100/M14 INOX 0,50 IA ,000 2,400 9,000 TBG 100/M14 INOX 0,50 IA 400 TBGR, with bridle Aggressive brush with bridle. Excellent for heavy-duty brushing such as deburring, cleaning and derusting on large surfaces. The bridle prevents the wires spreading out For optimum results, use on powerful angle sideways. grinders. Particularly long tool life. Remove the bridle once the filament is worn The bridle enables the spreading out and flexibility of the brush filament to be controlled. R T down. Then the rest of the filament can be used. Remove the bridle before starting work if you would like to achieve a large spreading diameter or access hard-to-reach areas. F Knots [pcs.] escription EAN Steel wire (ST) M14x ,300,500,500 TBGR 0/M14 ST 0, M14x ,300,500,500 TBGR 100/M14 ST 0,50 5/ ,300,500,500 TBGR 100/5/ ST 0, / ,300 6,500 6,500 TBGR 125/5/ ST 0, / ,00 5,500 5,500 TBGR 150/5/ ST 0,50 1 R T Catalogue 13

14 Threaded cup brushes knotted TBG CT, COMBITWIST T Very aggressive brush. Excellent for heavy-duty brushing such as deburring, cleaning and derusting on large surfaces. Maximum economic efficiency due to the For optimum results, use on powerful angle longest tool life and the highest stock grinders. removal. High level of comfort thanks to smooth running with no brush recoiling. For the 5-piece packaging unit, please Suitable for work on corners and edges as specify the description without POS. the knots are less likely to unravel. PFERVAUE: T F Knots [pcs.] 1 5 escription Steel wire (ST) COMBITWIST type M14x ,300 12,500 12,500 POS TBG 65/M14 CT ST 0, ,300 12,500 12,500 POS TBG 65/M14 CT ST 0, M14x ,000 10,000 10,000 POS TBG 0/M14 CT ST 0, M14x ,500 9,000 9,000 POS TBG 100/M14 CT ST 0,50 COMBITWIST type All INOX brushes are degreased M14x ,000 12,500 12,500 POS TBG 65/M14 CT INOX 0, ,000 12,500 12,500 POS TBG 65/M14 CT INOX 0, M14x ,000 10,000 10,000 POS TBG 0/M14 CT INOX 0, ,000 10,000 10,000 POS TBG 0/M14 CT INOX 0, M14x ,600 9,000 9,000 POS TBG 100/M14 CT INOX 0, ,600 9,000 9,000 POS TBG 100/M14 CT INOX 0,50 Catalogue 14

15 Threaded bevel brushes crimped KBU Excellent for medium-duty brushing such as deburring, cleaning and derusting. Optimal access to hard-to-reach areas such For optimum results, use on speed-adjustable angle grinders. as inner edges, grooves and keyways. Suitable for use on angle grinders up to 0 m/s. Highly flexible, enabling optimal adjustment For the 5-piece packaging unit, please to the workpiece contour. specify the description without POS. Creates fine surfaces. 30 T T F 1 5 escription Steel wire (ST) M14x ,300 12,500 12,500 POS KBU 10010/M14 ST 0, M14x ,300 12,500 12,500 POS KBU 11510/M14 ST 0, M14x ,300 11,000 11,000 POS KBU 12510/M14 ST 0,35 All INOX brushes are degreased M14x ,000 12,500 12,500 POS KBU 10010/M14 INOX 0, M14x ,000 12,500 12,500 POS KBU 11510/M14 INOX 0, M14x ,000 11,000 11,000 POS KBU 12510/M14 INOX 0,35 knotted KBG Aggressive brush. Excellent for heavy-duty brushing such as deburring, cleaning and derusting. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. For optimum results, use on powerful angle grinders. For the 5-piece packaging unit, please specify the description without POS. 30 T T F Knots [pcs.] 1 5 escription Steel wire (ST) M14x ,000 15,000 20,000 POS KBG 10013/M14 ST 0, M14x ,500 12,500 15,000 POS KBG 11515/M14 ST 0, M14x ,500 12,000 15,000 POS KBG 12515/M14 ST 0,50 All INOX brushes are degreased M14x ,600 15,000 20,000 POS KBG 10013/M14 INOX 0, ,600 15,000 20,000 POS KBG 10013/M14 INOX 0, M14x ,000 12,500 15,000 POS KBG 11515/M14 INOX 0, ,000 12,500 15,000 POS KBG 11515/M14 INOX 0, M14x ,000 12,500 15,000 POS KBG 12515/M14 INOX 0, ,000 12,500 15,000 POS KBG 12515/M14 INOX 0,50 Catalogue 15

16 Threaded bevel brushes knotted 30 T KBG CT, COMBITWIST Very aggressive brush. Excellent for heavy-duty brushing such as deburring, cleaning and derusting. Optimal access to hard-to-reach areas such For optimum results, use on powerful angle as inner edges, grooves and keyways. grinders. Maximum economic efficiency due to the longest tool life and the highest stock removal. For the 5-piece packaging unit, please High level of comfort thanks to smooth specify the description without POS. running with no brush recoiling. PFERVAUE: Suitable for work on corners and edges as the knots are less likely to unravel. T F Knots [pcs.] 1 5 escription Steel wire (ST) COMBITWIST type M14x ,000 15,000 20,000 POS KBG 10013/M14 CT ST 0, M14x ,500 12,500 15,000 POS KBG 11515/M14 CT ST 0, M14x ,500 12,500 15,000 POS KBG 12515/M14 CT ST 0,50 COMBITWIST type All INOX brushes are degreased M14x ,000 15,000 20,000 POS KBG 10013/M14 CT INOX 0, ,000 15,000 20,000 POS KBG 10013/M14 CT INOX 0, M14x ,000 12,500 15,000 POS KBG 11515/M14 CT INOX 0, ,000 12,500 15,000 POS KBG 11515/M14 CT INOX 0, M14x ,000 12,500 15,000 POS KBG 12515/M14 CT INOX 0, ,000 12,500 15,000 POS KBG 12515/M14 CT INOX 0,50 Catalogue 16

17 Wheel brushes crimped RBU, for angle grinders Suitable for medium-duty brushing such as derusting, cleaning of weld seams and light deburring work. Suitable for use on angle grinders up to 0 m/s. Highly flexible, enabling optimal adjustment to the workpiece contour. Creates fine surfaces. T For optimum results, use on speed-adjustable angle grinders. T F 1 escription Steel wire (ST) M14x ,300 12,500 12,500 POS RBU 11512/M14 ST 0, M14x ,500 11,000 11,000 POS RBU 12512/M14 ST 0,30 All INOX brushes are degreased M14x ,000 12,500 12,500 POS RBU 11512/M14 INOX 0, M14x ,400 11,000 11,000 POS RBU 12512/M14 INOX 0,30 RBU, POISCRATCH Excellent for processing and removing soft materials such as underseal and anti-drumming compound. Ideally suited to achieving rough, like sandblasted, surfaces due to the specific geometry of the filament material. Use only on speed-adjustable angle and straight grinders. Can be resharpened up to 10x. To do so, press the wire tips onto a sharpening block for around 2 3 seconds. Change the running direction to sharpen the tool. T PFERVAUE: High cooling effect and no smearing or loading of the brush due to the open construction of the filament material. onger tool life as the brush can be resharpened using a sharpening block. T F 5x 1 escription Steel wire (ST) M14x ,200 3,500 6,000 POS RBU 10020/M14 SC ST 0,60 Arbor BO /M14 (90042) Safety note: Exclusively for use with POISCRATCH brushes. For more information: etailed information on accessories can be found on pages 55 and 56. Catalogue 17

18 Wheel brushes knotted RBG Aggressive brush. Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues. Aggressive brushing effect due to the very For the 10-piece packaging unit, please stiff wire knots. specify the description without POS. A T For optimum results, use on powerful angle grinders. A / T F Knots [pcs.] 1 10 escription Steel wire (ST) M14x ,000 15,000 20,000 POS RBG 10012/M14 ST 0, ,300 12,500 12,500 POS RBG 11512/22,2 ST 0,50 M14x ,300 12,500 12,500 POS RBG 11512/M14 ST 0, ,500 12,500 12,500 POS RBG 12512/22,2 ST 0,50 M14x ,500 12,500 12,500 POS RBG 12512/M14 ST 0, ,000 10,000 10,000 POS RBG 15013/22,2 ST 0, ,500,500 9,000 POS RBG 1713/22,2 ST 0,50 M14x ,500,500 9,000 POS RBG 1713/M14 ST 0, ,500,500 9,000 POS RBG 1713/22,2 ST 0,0 All INOX brushes are degreased ,000 12,500 12,500 POS RBG 11512/22,2 INOX 0, ,000 12,500 12,500 POS RBG 11512/22,2 INOX 0,50 M14x ,000 12,500 12,500 POS RBG 11512/M14 INOX 0,35 M14x ,000 12,500 12,500 POS RBG 11512/M14 INOX 0, ,400 12,500 12,500 POS RBG 12512/22,2 INOX 0, ,400 12,500 12,500 POS RBG 12512/22,2 INOX 0,50 M14x ,400 12,500 12,500 POS RBG 12512/M14 INOX 0,35 M14x ,400 12,500 12,500 POS RBG 12512/M14 INOX 0, ,600,500 9,000 POS RBG 1713/22,2 INOX 0, ,600,500 9,000 POS RBG 1713/22,2 INOX 0,50 M14x ,600,500 9,000 POS RBG 1713/M14 INOX 0,35 M14x ,600,500 9,000 POS RBG 1713/M14 INOX 0,50 Arbor BO /22, (751930): For knotted wheel brushes up to a diameter of 125 mm with a A of 22.2 mm. BO 12/22, (10750): For knotted and crimped wheel brushes with a diameter of mm and a A of 22.2 mm. For more information: etailed information on accessories can be found on pages 55 and 56. Catalogue 1

19 Wheel brushes knotted RBG CT, COMBITWIST Very aggressive brush. Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues. Maximum economic efficiency due to the longest tool life and the highest stock removal. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. A T For optimum results, use on powerful angle grinders. For the 10-piece packaging unit, please specify the description without POS. PFERVAUE: A / T F Arbor BO /22, (751930): For knotted wheel brushes up to a diameter of 125 mm with a A of 22.2 mm. Knots [pcs.] 1 10 BO 12/22, (10750): For knotted and crimped wheel brushes with a diameter of mm and a A of 22.2 mm. escription Steel wire (ST) COMBITWIST type ,300 12,500 12,500 POS RBG 11512/22,2 CT ST 0,50 M14x ,300 12,500 12,500 POS RBG 11512/M14 CT ST 0, ,500 12,500 12,500 POS RBG 12512/22,2 CT ST 0,50 M14x ,500 12,500 12,500 POS RBG 12512/M14 CT ST 0, ,500,500 9,000 POS RBG 1713/22,2 CT ST 0, ,500,500 9,000 POS RBG 1713/22,2 CT ST 0,0 COMBITWIST type All INOX brushes are degreased ,000 12,500 12,500 POS RBG 11512/22,2 CT INOX 0, ,000 12,500 12,500 POS RBG 11512/22,2 CT INOX 0,50 M14x ,000 12,500 12,500 POS RBG 11512/M14 CT INOX 0,35 M14x ,000 12,500 12,500 POS RBG 11512/M14 CT INOX 0, ,400 12,500 12,500 POS RBG 12512/22,2 CT INOX 0, ,400 12,500 12,500 POS RBG 12512/22,2 CT INOX 0,50 M14x ,400 12,500 12,500 POS RBG 12512/M14 CT INOX 0,35 M14x ,400 12,500 12,500 POS RBG 12512/22,2 CT INOX 0, ,600,500 9,000 POS RBG 1713/22,2 CT INOX 0, ,600,500 9,000 POS RBG 1713/22,2 CT INOX 0,50 For more information: etailed information on accessories can be found on pages 55 and 56. Catalogue 19

20 PFER Tools for Pipeline Construction Titelseite - Vorschlag Gabriel Concept mit Textbullets Optimum work results Maximum efficiency and safety Sturdy under extreme weather and working conditions Stand/ TRUST BUE 1 Cut-off wheels, flap discs and grinding wheels 6 Wheel brushes Pipeline RBG PE, Pipeline Aggressive and robust brush that is able to withstand high mechanical loads. Perfect for heavyduty brushing in pipeline and container construction. A T Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams. Aggressive brushing effect due to the very stiff wire knots. For optimum results, use on powerful angle grinders. A / T Knots [pcs.] F 10 escription Steel wire (ST) ,000 15,000 20,000 RBG 10006/16,0 PE ST 0, ,300 12,500 12,500 RBG 11506/22,2 PE ST 0,50 M14x ,300 12,500 12,500 RBG 11506/M14 PE ST 0, ,300 12,500 12,500 RBG 12506/22,2 PE ST 0,50 M14x ,300 12,500 12,500 RBG 12506/M14 PE ST 0, ,000 10,000 10,000 RBG 15006/22,2 PE ST 0,50 M14x ,000 10,000 10,000 RBG 15006/M14 PE ST 0, ,500,500 9,000 RBG 1706/22,2 PE ST 0,50 56Z M14x ,500,500 9,000 RBG 1706/M14 PE ST 0,50 56Z ,500,500 9,000 RBG 1706/22,2 PE ST 0,50 76Z M14x ,500,500 9,000 RBG 1706/M14 PE ST 0,50 76Z All INOX brushes are degreased ,000 15,000 20,000 RBG 10006/16,0 PE INOX 0, ,000 12,500 12,500 RBG 11506/22,2 PE INOX 0,50 M14x ,000 12,500 12,500 RBG 11506/M14 PE INOX 0, ,000 12,500 12,500 RBG 12506/22,2 PE INOX 0,50 M14x ,000 12,500 12,500 RBG 12506/M14 PE INOX 0, ,000 10,000 10,000 RBG 15006/22,2 PE INOX 0,50 M14x ,000 10,000 10,000 RBG 15006/M14 PE INOX 0, ,600,500 9,000 RBG 1706/22,2 PE INOX 0,50 76Z M14x ,600,500 9,000 RBG 1706/M14 PE INOX 0,50 76Z For tools specially suited to pipeline construction, see the brochure PFER tools for pipeline construction. For detailed information and ordering data on PFER grinding wheels for pipeline construction, please refer to catalogue section 6. Catalogue 20

21 Wheel brushes Pipeline RBG PE CT, Pipeline COMBITWIST Very aggressive and robust brush that is able to withstand high mechanical loads. Perfect for heavy-duty brushing in pipeline and container construction. Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams. Maximum economic efficiency due to the longest tool life and the highest stock removal. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. For optimum results, use on powerful angle grinders. PFERVAUE: A T A / T Knots [pcs.] F 10 escription Steel wire (ST) COMBITWIST type ,300 12,500 12,500 RBG 12506/22,2 PE CT ST 0,50 M14x ,300 12,500 12,500 RBG 12506/M14 PE CT ST 0, ,500,500 9,000 RBG 1706/22,2 PE CT ST 0,50 72Z M14x ,500,500 9,000 RBG 1706/M14 PE CT ST 0,50 72Z Wheel brushes, knotted RBG, stationary Aggressive and robust brush that is able to withstand high mechanical loads. Suitable for all heavy-duty stationary and automated brushing, e.g. deburring work. Aggressive brushing effect due to the very stiff wire knots. Can be used with all common stationary drive systems and bench grinders thanks to the variable arbor hole diameter. Please complete the description with the desired filament material diameter ( F ). Grit size IA 270 = 64, grit size IA 400 = 46 A A Knots [pcs.] F escription Steel wire (ST) ,000 6,500,500 1 RBG 20016/50, ST ,000 3,400 4,500 1 RBG 25016/50, ST... iamond (IA) ,000 2,000,000 1 POS RBG 19030/22,2 INOX 0,50 IA ,000 2,000,000 1 POS RBG 19030/22,2 INOX 0,50 IA 400 Arbor BO 12/22,2 200 (10767): For knotted and crimped wheel brushes with a diameter of 200 mm and a A of 22.2 mm. Note: Adapter pair APM 50,/22,2-30 (900390) is required to use the product with the arbor. Adapter pair APM 50,/...: Reduces the arbor hole diameters to the required dimensions. Suitable for knotted wheel brushes with a diameter of mm and crimped wheel brushes designed as deburring brushes. For more information: etailed information on accessories can be found on pages 55 and 56. Catalogue 21

22 Wheel brushes crimped A AM RBU, slim Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces. Highly flexible, enabling optimal adjustment Can be used with all common stationary to the workpiece contour. drive systems and bench grinders thanks to the variable arbor hole diameter. Can be packed as wide rollers without gaps Please order adapter set AK 32 separately. because of their special design. Wheel brushes with diameters 100 and 125 mm cannot be used with adapter set AK 32. A AM F 2 escription Steel wire (ST) ,000 6,000,000 RBU 10012/14,0 ST 0, ,000 6,000,000 RBU 10012/14,0 ST 0, ,000 6,000,000 RBU 12512/14,0 ST 0, ,000 4,500 6,000 RBU 15012/22,2 ST 0, ,000 4,500 6,000 RBU 1012/22,2 ST 0, ,000 4,500 6,000 RBU 20016/22,2 ST 0, ,00 2,700 3,600 RBU 25020/22,2 ST 0,25 All INOX brushes are degreased ,200 5,200,000 RBU 12512/14,0 INOX 0, ,400 3,900 6,000 RBU 15012/22,2 INOX 0, ,400 3,900 6,000 RBU 1012/22,2 INOX 0, ,400 3,900 6,000 RBU 20016/22,2 INOX 0, ,400 2,300 3,600 RBU 25020/22,2 INOX 0,30 Silicon carbide (SiC) plastic filament ,200 5,200,000 RBU 10012/12,0 SiC 0 1, ,200 5,200,000 RBU 10012/12,0 SiC 10 0, ,400 3,900,000 RBU 15016/12,0 SiC 0 1, ,400 3,900,000 RBU 15016/12,0 SiC 10 0, ,00 2,900 4,500 RBU 20016/22,2 SiC 0 1, ,00 2,900 4,500 RBU 20016/22,2 SiC 10 0, ,400 2,300 3,600 RBU 25016/22,2 SiC 0 1, ,400 2,300 3,600 RBU 25016/22,2 SiC 10 0,90 Ceramic oxide grain (CO) plastic filament ,200 5,200,000 RBU 10012/12,0 CO 120 1, ,400 3,900 6,000 RBU 15016/12,0 CO 120 1, ,00 2,900 4,500 RBU 20016/22,2 CO 120 1,10 Nylon plastic filament ,200 5,200,000 RBU 10012/12,0 Nylon 0, ,200 5,200,000 RBU 15016/12,0 Nylon 0, ,400 3,900 6,000 RBU 20016/22,2 Nylon 0,40 Arbor BO / (10743): For crimped wheel brushes with a diameter of mm and a A / AM of 12 mm and 14 mm. BO 12/22, (10750): For knotted and crimped wheel brushes with a diameter of mm and a A of 22.2 mm. BO 12/22,2 200 (10767): For knotted and crimped wheel brushes with a diameter of 200 mm and a A of 22.2 mm. Adapter set AK 32 (60593): Arbor hole diameters contained in the set in mm (inch): 20 / 1 / 14 / 12 / 25.4 (1) / 22.2 (7/) / 16 (5/) / 12.7 (1/2). For more information: etailed information on accessories can be found on pages 55 and 56. Catalogue 22

23 Wheel brushes crimped RBU, slim, stationary Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing. Ideal for processing aluminium due to the longer trim length and higher degree of flexibility. Suitable for use on stationary machines, automated centres and robots. Can be packed as wide rollers without gaps because of their special design. Highly flexible, enabling optimal adjustment to the workpiece contour. Use CO as the filament material for particularly aggressive work and a high workpiece surface quality. Please complete the description with the desired grit size and filament material diameter ( F ). A A Grit size / F escription Silicon carbide (SiC) plastic filament ,400 3,900 6,000 1 RBU 20013/50, SiC ,400 2,300 3,600 1 RBU 25015/50, SiC Ceramic oxide grain (CO) plastic filament ,400 3,900 6,000 1 RBU 20013/50, CO ,400 2,300 3,600 1 RBU 25015/50, CO Arbor BO 12/22,2 200 (10767): For knotted and crimped wheel brushes with a diameter of 200 mm and a A of 22.2 mm. Note: Adapter pair APM 50,/22,2-30 (900390) is required to use the product with the arbor. Adapter pair APM 50,/...: Reduces the arbor hole diameters to the required dimensions. Suitable for knotted wheel brushes with a diameter of mm and crimped wheel brushes designed as deburring brushes. For more information: etailed information on accessories can be found on pages 55 and 56. Catalogue 23

24 Wheel brushes crimped A AM RBU, wide, universal use Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces. eveloped for universal use in the workshop. Can be used with all common stationary iameters of mm are supplied drive systems and bench grinders thanks to together with adapter set AK the variable arbor hole diameter. iameters of mm are supplied with a variable arbor hole. A AM F escription Steel wire (ST) /14/1/22.2/ ,000 6,000,000 POS RBU 10020/14,0 ST 0, /14/1/22.2/ ,000 6,000,000 POS RBU 1002/14,0 ST 0, /14/1/22.2/ ,000 4,500 6,000 POS RBU 12520/14,0 ST 0, /14/1/22.2/ ,000 4,500 6,000 POS RBU 1252/14,0 ST 0, AK ,000 4,500 6,000 POS RBU 15025/AK32-2 ST 0, AK ,000 4,500 6,000 POS RBU 15025/AK32-2 ST 0, AK ,000 4,500 6,000 POS RBU 1503/AK32-2 ST 0, AK ,000 4,500 6,000 POS RBU 1503/AK32-2 ST 0, AK ,000 4,500 6,000 POS RBU 1025/AK32-2 ST 0, AK ,000 4,500 6,000 POS RBU 1025/AK32-2 ST 0, AK ,000 4,500 6,000 POS RBU 103/AK32-2 ST 0, AK ,300 3,400 4,500 POS RBU 20025/AK32-2 ST 0, AK ,300 3,400 4,500 POS RBU 20025/AK32-2 ST 0, AK ,300 3,400 4,500 POS RBU 2003/AK32-2 ST 0, /14/1/22.2/ ,200 5,200,000 POS RBU 10020/14,0 INOX 0, /14/1/22.2/ ,200 5,200,000 POS RBU 1002/14,0 INOX 0, /14/1/22.2/ ,400 3,900 6,000 POS RBU 12520/14,0 INOX 0, /14/1/22.2/ ,400 3,900 6,000 POS RBU 1252/14,0 INOX 0, AK ,400 3,900 6,000 POS RBU 15025/AK32-2 INOX 0, AK ,400 3,900 6,000 POS RBU 15025/AK32-2 INOX 0, AK ,400 3,900 6,000 POS RBU 1503/AK32-2 INOX 0, AK ,400 3,900 6,000 POS RBU 1503/AK32-2 INOX 0, AK ,400 3,900 6,000 POS RBU 1025/AK32-2 INOX 0, AK ,400 3,900 6,000 POS RBU 1025/AK32-2 INOX 0, AK ,400 3,900 6,000 POS RBU 103/AK32-2 INOX 0, AK ,00 2,900 4,500 POS RBU 20025/AK32-2 INOX 0, AK ,00 2,900 4,500 POS RBU 20025/AK32-2 INOX 0, AK ,00 2,900 4,500 POS RBU 2003/AK32-2 INOX 0,30 Silicon carbide (SiC) plastic filament AK ,400 3,900 6,000 POS RBU 15025/AK32-2 SiC 120 0, ,400 3,900 6,000 POS RBU 15025/AK32-2 SiC 120 1, ,400 3,900 6,000 POS RBU 15025/AK32-2 SiC 320 0, AK ,400 3,900 6,000 POS RBU 20025/AK32-2 SiC 120 1,10 1 Arbor BO / (10743): For crimped wheel brushes with a diameter of mm and a A / AM of 12 mm and 14 mm. BO 12/22, (10750): For knotted and crimped wheel brushes with a diameter of mm and a A of 22.2 mm. BO 12/22,2 200 (10767): For knotted and crimped wheel brushes with a diameter of 200 mm and a A of 22.2 mm. Adapter set AK 32-2 (0690): Arbor hole diameters contained in the set in mm (inch): / 20 / 1 / 14 / 12 / 25.4 (1) / 22.2 (7/) / 19.2 (.750) / 16 (5/) / 12.7 (1/2). Note: Adapter pairs AM 50, for brushes with a AM of 50. mm can be used in applications involving high levels of heat and forces. Catalogue 24

25 Wheel brushes crimped RBU, wide, industrial use Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces. eveloped specially for industrial use. Can be used with all common stationary iameters of mm are supplied drive systems and bench grinders thanks to together with adapter set AK the variable arbor hole diameter. The 100 mm diameter is supplied with a High economic efficiency due to very long variable arbor hole. tool life. A AM A AM F escription Steel wire (ST) /1.0/ ,000 6,000,000 RBU 10020/14,0 ST 0, /1.0/ ,000 6,000,000 RBU 1002/14,0 ST 0, AK ,000 4,500 6,000 RBU 15025/AK32-2 ST 0, AK ,000 4,500 6,000 RBU 1503/AK32-2 ST 0, AK ,000 4,500 6,000 RBU 1025/AK32-2 ST 0, AK ,300 3,400 4,500 RBU 20025/AK32-2 ST 0, AK ,300 3,400 4,500 RBU 2003/AK32-2 ST 0, AK ,00 2,700 3,600 RBU 25030/AK32-2 ST 0, AK ,00 2,700 3,600 RBU 2504/AK32-2 ST 0, ,500 2,500 3,000 RBU 30040/50, ST 0,30 All INOX brushes are degreased AK ,400 3,900 6,000 RBU 15025/AK32-2 INOX 0, AK ,400 3,900 6,000 RBU 1503/AK32-2 INOX 0, AK ,400 3,900 6,000 RBU 1025/AK32-2 INOX 0, AK ,00 2,900 4,500 RBU 20025/AK32-2 INOX 0, AK ,00 2,900 4,500 RBU 2003/AK32-2 INOX 0, AK ,400 2,300 3,600 RBU 25030/AK32-2 INOX 0, AK ,400 2,300 3,600 RBU 2504/AK32-2 INOX 0,30 1 Arbor BO / (10743): For crimped wheel brushes with a diameter of mm and a A / AM of 12 mm and 14 mm. BO 12/22, (10750): For knotted and crimped wheel brushes with a diameter of mm and a A of 22.2 mm. BO 12/22,2 200 (10767): For knotted and crimped wheel brushes with a diameter of 200 mm and a A of 22.2 mm. Adapter set AK 32-2 (0690): Arbor hole diameters contained in the set in mm (inch): / 20 / 1 / 14 / 12 / 25.4 (1) / 22.2 (7/) / 19.2 (.750) / 16 (5/) / 12.7 (1/2). Note: Adapter pairs AM 50, for brushes with a AM of 50. mm can be used in applications involving high levels of heat and forces. Catalogue 25

26 Wheel brushes crimped A AM RBU, deburring brushes Particularly suitable for deburring pipes, cut edges and small parts on stationary machines. The special wire construction with cord wire filament (IT) is particularly suitable for heavy-duty brushing and aggressive brushing. Individual check for imbalance guarantees smooth running. ongest tool life thanks to high filament density. Please complete the description with the desired filament material diameter ( F ). Please order adapter pairs APM 50, separately. A AM F escription Steel wire (ST) IT ST = stranded, brass-plated steel wire ,00 2,700 3,600 1 RBU 25060/50, ST ,00 2,700 3,600 1 RBU 25060/50, IT ST ,00 2,700 3,600 1 RBU 2500/50, ST ,00 2,700 3,600 1 RBU 2500/50, IT ST ,00 2,700 3,600 1 RBU /50, ST IT INOX = stranded INOX wire ,400 2,300 3,600 1 RBU 25060/50, INOX ,400 2,300 3,600 1 RBU 25060/50, IT INOX ,400 2,300 3,600 1 RBU /50, INOX Silicon carbide (SiC) plastic filament ,400 2,300 3,600 1 RBU 25060/50, SiC 120 Adapter pair APM 50,/...: Reduces the arbor hole diameters to the required dimensions. Suitable for knotted wheel brushes with a diameter of mm and crimped wheel brushes designed as deburring brushes. For more information: etailed information on accessories can be found on pages 55 and 56. Catalogue 26

27 Composite Composite brushes Composite brushes from PFER have been specifically developed for industrial, automated use. They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems. This offers the advantage that the workpiece can be produced and finished on the same machine. As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times. The standard type of composite brushes is suitable for tasks requiring aggressive brushing behaviour. The FEX type is more flexible than the standard type due to its longer trim length on wheel brushes and the special arrangement of the filament on composite disc brushes, and it is particularly well suited to work on irregular surfaces. For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and the suitable brush must be selected. PFER offers a wide range of products for the various applications. Our experienced sales representatives and technical advisers will be happy to help or visit you. Our worldwide sales addresses can be found at: Wheel brushes, crimped RBUP Particularly aggressive brush. Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing. eveloped specially for industrial use. ong tool life and aggressive brushing effect Please complete the description with the due to a very high filament density. desired grit size and filament material Extremely smooth operation due to even diameter ( F ). distribution of the filament material. Please order adapter pairs APM 50, separately. Use CO as the filament material for particularly aggressive work and a high workpiece PFERVAUE: surface quality. Select the REC type (rectangular filament) for aggressive work with SiC as the filament material. A A Grit size / F escription Silicon carbide (SiC) plastic filament ,500 3,600 1 RBUP 15025/50, REC SiC ,500 3,600 1 RBUP 15025/50, SiC ,500 3,600 1 RBUP 20025/50, REC SiC ,500 3,600 1 RBUP 20025/50, SiC ,500 3,600 1 RBUP 25025/50, REC SiC ,500 3,600 1 RBUP 25025/50, SiC Ceramic oxide grain (CO) plastic filament ,500 3,600 1 RBUP 15025/50, CO ,500 3,600 1 RBUP 20025/50, CO ,500 3,600 1 RBUP 25025/50, CO Arbor BO 12/22, (10750): For knotted and crimped wheel brushes with a diameter of mm and a A of 22.2 mm. BO 12/22,2 200 (10767): For knotted and crimped wheel brushes with a diameter of 200 mm and a A of 22.2 mm. Note: Adapter pair AM 50,/22,2 (06906) is required to use the product with arbors. Adapter pair AM 50,/...: Reduces the arbor hole diameters to the required dimensions. Suitable for wheel brushes with a brush diameter as from 150 mm in the wide and composite types. Catalogue 27

28 Composite Wheel brushes, crimped A RBUP, FEX Particularly flexible brush. Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing. eveloped specially for industrial use. ong tool life and aggressive brushing effect Please complete the description with the due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up. Use CO as the filament material for particularly aggressive work and a high workpiece surface quality. Select the REC type (rectangular filament) for aggressive work with SiC as the filament material. desired grit size and filament material diameter ( F ). unit: 1 piece PFERVAUE: A Keyway Grit size / F escription Silicon carbide (SiC) plastic filament FEX type ,500 3,600 RBUP 20025/50, REC SiC FEX ,500 3,600 RBUP 20025/50, SiC FEX ,500 3,600 RBUP 25025/50, REC SiC FEX ,500 3,600 RBUP 25025/50, SiC FEX x ,500 3,600 RBUP 25025/50, SiC FEX x ,00 RBUP 30025/50, SiC FEX x ,00 RBUP 35025/50, SiC FEX Ceramic oxide grain (CO) plastic filament FEX type x ,00 RBUP 30025/50, CO FEX x ,00 RBUP 35025/50, CO FEX BO 12/22,2 200 (10767): For knotted and crimped wheel brushes with a diameter of 200 mm and a A of 22.2 mm. Note: Adapter pair AM 50,/22,2 (EAN ) is required to use the product with arbors. Adapter pair AM 50,/...: Reduces the arbor hole diameters to the required dimensions. Suitable for wheel brushes with a brush diameter as from 150 mm in the wide and composite versions. For more information: etailed information on accessories can be found on pages 55 and 56. Catalogue 2

29 PFER tools for use on aluminium TRUST BUE Composite Composite disc brushes, crimped BUR, with bridle Particularly aggressive brush. Particularly suitable for deburring and work on surfaces on stationary machines. ong tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Use CO as the filament material for particularly aggressive work and a high workpiece surface quality. Select the REC type (rectangular filament) for aggressive work with SiC as the filament material. Remove the bridle once the filament is worn down. Then the rest of the filament can be used. Remove the bridle before starting work if you would like to achieve a large spreading diameter or access hard-to-reach areas. Brushes with a diameter of 75 mm with an M14 thread are suitable for use on speedadjustable angle grinders. Please complete the description with the desired grit size and filament material diameter ( F ). All composite disc brushes with a 22.2 mm diameter arbor hole are supplied with two drive pin holes with 6.5 mm diameter. Pitch circle diameter of 31 mm. PFERVAUE: R A / T R A / T Grit size / F escription Silicon carbide (SiC) plastic filament ,400 3,900 4,500 1 BUR 75/22,2 REC SiC ,400 3,900 4,500 1 BUR 75/22,2 SiC M14x ,400 3,900 6,000 1 BUR 75/M14 REC SiC M14x ,400 3,900 6,000 1 BUR 75/M14 SiC ,400 2,300 3,500 1 BUR 100/22,2 REC SiC ,400 2,300 3,500 1 BUR 100/22,2 SiC ,200 2,000 3,000 1 BUR 125/22,2 REC SiC ,200 2,000 3,000 1 BUR 125/22,2 SiC ,000 1,600 2,500 1 BUR 150/22,2 SiC ,000 1,600 2,500 1 BUR 150/22,2 REC SiC Ceramic oxide grain (CO) plastic filament ,400 3,900 4,500 1 BUR 75/22,2 CO ,400 2,300 3,500 1 BUR 100/22,2 CO ,200 2,000 3,000 1 BUR 125/22,2 CO ,000 1,600 2,500 1 BUR 150/22,2 CO Arbor BO 12/22, (07): For all composite disc brushes with a diameter of mm and a A of 22.2 mm. BO 12/22, (094): For all composite disc brushes with a diameter of mm and a A of 22.2 mm. For more information: etailed information on accessories can be found on pages 55 and 56. Aluminium More PFER tools and a large number of recommendations for use when working with aluminium can be found in our PRAXIS brochure, PFER tools for use on aluminium. Please contact us. Catalogue 29

30 Composite Composite disc brushes, crimped BU, FEX Particularly flexible brush. Particularly suitable for deburring and work on surfaces on stationary machines. A ong tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Special arrangement of the filament enables optimal adjustment to the workpiece contour and less heat build-up. Select the REC type (rectangular filament) for aggressive work with SiC as the filament material. Please complete the description with the desired grit size and filament material diameter ( F ). All composite disc brushes with a 22.2 mm diameter arbor hole are supplied with two drive pin holes with 6.5 mm diameter. Pitch circle diameter of 31 mm. PFERVAUE: A Grit size / F escription Silicon carbide (SiC) plastic filament FEX type ,400 3,900 4,500 1 BU 75/22,2 REC SiC FEX ,400 3,900 4,500 1 BU 75/22,2 SiC FEX ,400 2,300 3,500 1 BU 100/22,2 REC SiC FEX ,400 2,300 3,500 1 BU 100/22,2 SiC FEX ,000 1,600 2,500 1 BU 150/22,2 REC SiC FEX ,000 1,600 2,500 1 BU 150/22,2 SiC FEX BUR, shank-mounted, with bridle R H S = 6 mm Particularly aggressive brush. Particularly suitable for deburring and work on surfaces on stationary machines. ong tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Use CO as the filament material for particularly aggressive work and a high workpiece surface quality. Remove the bridle once the filament is worn down. Then the rest of the filament can be used. Remove the bridle before starting work if you would like to achieve a large spreading diameter or access hard-to-reach areas. Please complete the description with the desired filament material diameter ( F ). PFERVAUE: R H Grit size / F escription Silicon carbide (SiC) plastic filament ,500 3,500 5,000 1 BUR 50/6 SiC ,500 3,500 5,000 1 BUR 63/6 SiC Ceramic oxide grain (CO) plastic filament ,500 3,500 5,000 1 BUR 50/6 CO ,500 3,500 5,000 1 BUR 63/6 CO Arbor BO 12/22, (07): For all composite disc brushes with a diameter of mm and a A of 22.2 mm. BO 12/22, (094): For all composite disc brushes with a diameter of mm and a A of 22.2 mm. For more information: etailed information on accessories can be found on pages 55 and 56. Catalogue 30

31 Composite Shank mounted end brushes, crimped PBUPR, with bridle Particularly suitable for deburring and work on surfaces on stationary machines. ong tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Optimal access to hard-to-reach areas such as drilled holes and cavities as the wires spread out upon rotation. Use CO as the filament material for particularly aggressive work and a high workpiece surface quality. Remove the bridle once the filament is worn down. Then the rest of the filament can be used. Remove the bridle before starting work if you would like to ensure particularly flexible working, achieve a large spreading diameter or access hard-to-reach areas. Please complete the description with the desired grit size and filament material diameter ( F ). All brushes are supplied with a bridle. PFERVAUE: R S= 6 mm C C R Grit size / F escription Silicon carbide (SiC) plastic filament ,400 3,900 6,000 1 PBUPR 252/6 SiC ,000 3,200 5,000 1 PBUPR 33/6 SiC Ceramic oxide grain (CO) plastic filament ,400 3,900 6,000 1 PBUPR 252/6 CO ,000 3,200 5,000 1 PBUPR 33/6 CO... Catalogue 31

32 Shank mounted end brushes crimped PBU Suitable for light brushing such as deburring, cleaning and derusting. Optimal access to hard-to-reach areas such as drilled holes and cavities as the wires spread out upon rotation. S= 6 mm C For the best results, use a tool drive with a minimum output of 300 watts. For POS type, please add POS to the description. C F 10x 1 10 escription Steel wire (ST) ,000 15,000 20,000 PBU 1010/6 ST 0, ,000 15,000 20,000 PBU 1010/6 ST 0, ,000 15,000 20,000 PBU 1312/6 ST 0, ,000 15,000 20,000 PBU 1312/6 ST 0, ,000 13,500 1,000 PBU 1516/6 ST 0, ,000 13,500 1,000 PBU 1516/6 ST 0, ,000 13,500 1,000 PBU 2022/6 ST 0, ,000 13,500 1,000 PBU 2022/6 ST 0, ,500 11,300 15,000 PBU 3029/6 ST 0, ,500 11,300 15,000 PBU 3029/6 ST 0,50 Supplied with plastic-covered brush body. All INOX brushes are degreased ,000 13,000 20,000 PBU 1010/6 INOX 0, ,000 13,000 20,000 PBU 1010/6 INOX 0, ,000 13,000 20,000 PBU 1010/6 INOX 0, ,000 13,000 20,000 PBU 1312/6 INOX 0, ,000 13,000 20,000 PBU 1312/6 INOX 0, ,000 13,000 20,000 PBU 1312/6 INOX 0, ,200 11,700 1,000 PBU 1516/6 INOX 0, ,200 11,700 1,000 PBU 1516/6 INOX 0, ,200 11,700 1,000 PBU 1516/6 INOX 0, ,200 11,700 1,000 PBU 2022/6 INOX 0, ,200 11,700 1,000 PBU 2022/6 INOX 0, ,200 11,700 1,000 PBU 2022/6 INOX 0, ,000 9,00 15,000 PBU 3029/6 INOX 0, ,000 9,00 15,000 PBU 3029/6 INOX 0, ,000 9,00 15,000 PBU 3029/6 INOX 0,50 Brass wire (MES) ,000 13,000 20,000 PBU 1010/6 MES 0, ,000 13,000 20,000 PBU 1312/6 MES 0, ,200 11,700 1,000 PBU 1516/6 MES 0, ,200 11,700 1,000 PBU 2022/6 MES 0, ,000 9,00 15,000 PBU 3029/6 MES 0,50 Silicon carbide (SiC) plastic filament ,000 13,000 20,000 PBU 1010/6 SiC 10 0, ,000 13,000 20,000 PBU 1312/6 SiC 10 0, ,200 11,700 1,000 PBU 1516/6 SiC 10 0, ,200 11,700 1,000 PBU 2022/6 SiC 10 0, ,000 9,00 15,000 PBU 3029/6 SiC 10 0,90 Catalogue 32

33 Shank mounted end brushes crimped PBU, long / PBUS, tapered Suitable for light brushing such as deburring, cleaning and derusting. Special versions for particular applications. PBU: Particularly long version to access deep gaps. PBUS: Tapered tip for superb accuracy. PBU C S= 6 mm Optimal access to hard-to-reach areas. For the best results, use a tool drive with a minimum output of 300 watts. Please complete the description with the desired filament material diameter ( F ). PBUS C S= 6 mm C F escription Steel wire (ST) ,000 9,500 20, PBU 1010/6 ST ,000 15,000 20, PBUS 1010/6 ST Supplied with plastic-covered brush body. All INOX brushes are degreased ,500 9,000 20, PBU 1010/6 INOX ,000 13,000 20, PBUS 1010/6 INOX PBV, encapsulated Suitable for medium-duty brushing such as deburring, cleaning and derusting. Focused working thanks to high dimensional stability. ongest tool life as premature wire breakage is prevented. For the best results, use a tool drive with a minimum output of 300 watts. Use face-down for a particularly intensive brushing effect. S= 6 mm C C F 10 escription EAN Steel wire (ST) ,500 9,00 13,000 PBV 2222/6 ST 0, ,500 9,00 13,000 PBV 3029/6 ST 0,35 Catalogue 33

34 Shank mounted end brushes crimped PBUR, with bridle Suitable for light brushing such as deburring, cleaning and derusting. The bridle prevents the wires spreading out sideways. The bridle enables the spreading out and flexibility of the brush filament to be strictly controlled. Optimal access to hard-to-reach areas such as recesses and drilled holes. R S= 6 mm C For the best results, use a tool drive with a minimum output of 300 watts. Please complete the description with the desired filament material diameter ( F ). C R F escription Steel wire (ST) ,500 11,300 15, PBUR 1316/6 ST ,300 9,400 12, PBUR 2022/6 ST ,300 9,400 12, PBUR 2530/6 ST Supplied with plastic-covered brush body. All INOX brushes are degreased ,000 9,00 15, PBUR 1316/6 INOX ,000,100 12, PBUR 2022/6 INOX ,000,100 12, PBUR 2530/6 INOX knotted PBGS, SINGETWIST Particularly flexible single-knot brush for special applications. T S= 6 mm C Optimal access to hard-to-reach areas such as inside corners as the knot is less likely to unravel. For optimum results, use on speed-adjustable tool drives. For the best results, use a tool drive with a minimum output of 300 watts. Please complete the description with the desired filament material diameter ( F ). C F escription Steel wire (ST) SINGETWIST type ,000 7,500 10, PBGS 1010/6 ST ,000 7,500 10, PBGS 1210/6 ST SINGETWIST type Supplied with plastic-covered brush body. All INOX brushes are degreased ,000 6,500 10, PBGS 1010/6 INOX ,000 6,500 10, PBGS 1210/6 INOX Catalogue 34

35 Shank mounted end brushes knotted PBG Aggressive brush. Suitable for medium-duty brushing such as deburring, cleaning and derusting. Optimal access to hard-to-reach areas such For POS type, please add POS to the as recesses and drilled holes. description. Use speed-adjustable tool drives to control the spread of the brush. For the best results, use a tool drive with a minimum output of 500 watts. S= 6 mm C C F Knots [pcs.] 10x 1 10 escription Steel wire (ST) ,000 15,000 20,000 PBG 1919/6 ST 0, ,000 15,000 20,000 PBG 1919/6 ST 0, ,000 15,000 20,000 PBG 1919/6 ST 0, ,000 15,000 20,000 PBG 2323/6 ST 0, ,000 15,000 20,000 PBG 2323/6 ST 0, ,000 15,000 20,000 PBG 2323/6 ST 0, ,000 11,300 20,000 PBG 302/6 ST 0, ,000 11,300 20,000 PBG 302/6 ST 0, ,000 11,300 20,000 PBG 302/6 ST 0,50 Supplied with plastic-covered brush body. All INOX brushes are degreased ,000 13,000 20,000 PBG 1919/6 INOX 0, ,000 13,000 20,000 PBG 1919/6 INOX 0, ,000 13,000 20,000 PBG 1919/6 INOX 0, ,000 13,000 20,000 PBG 1919/6 INOX 0, ,000 13,000 20,000 PBG 2323/6 INOX 0, ,000 13,000 20,000 PBG 2323/6 INOX 0, ,000 13,000 20,000 PBG 2323/6 INOX 0, ,000 13,000 20,000 PBG 2323/6 INOX 0, ,000 9,00 20,000 PBG 302/6 INOX 0, ,000 9,00 20,000 PBG 302/6 INOX 0, ,000 9,00 20,000 PBG 302/6 INOX 0, ,000 9,00 20,000 PBG 302/6 INOX 0,60 Catalogue 35

36 Shank mounted cup brushes crimped S= 6 mm TBU Universally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint. Particularly suitable for brushing on large, flat and easily accessible surfaces due to facedown use with the entire brush face applied to the workpiece. Highly flexible, enabling optimal adjustment For POS type, please add POS to the to the workpiece contour. description. For the best results, use a tool drive with a minimum output of 300 watts. F H 5x 1 10 escription Steel wire (ST) ,300 7,900 10,500 TBU 3010/6 ST 0, ,300 7,900 10,500 TBU 4015/6 ST 0, ,300 7,900 10,500 TBU 5010/6 ST 0, ,200 3,400 4,500 TBU 6015/6 ST 0, ,000 4,500 6,000 TBU 7015/6 ST 0, ,000 4,500 6,000 TBU 7015/6 ST 0,30 Supplied with plastic covered brush body ,200 6,00 10,500 TBU 3010/6 INOX 0, ,200 6,00 10,500 TBU 4015/6 INOX 0, ,200 6,00 10,500 TBU 5010/6 INOX 0, ,00 2,900 4,500 TBU 6015/6 INOX 0, ,400 4,000 6,000 TBU 7015/6 INOX 0, ,400 4,000 6,000 TBU 7015/6 INOX 0,30 Silicon carbide (SiC) plastic filament ,200 6,00 10,500 TBU 5010/6 SiC 10 0, ,00 2,900 4,500 TBU 6015/6 SiC 10 0,90 Ceramic oxide grain (CO) plastic filament ,200 6,00 10,500 TBU 5015/6 CO 120 1,10 Catalogue 36

37 Shank mounted bevel brushes crimped KBU Excellent for medium-duty brushing such as deburring, cleaning and derusting. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. For the best results, use a tool drive with a minimum output of 300 watts. 30 H S= 6 mm F H 10 escription Steel wire (ST) ,500 11,300 15,000 KBU 5010/6 ST 0, ,500 11,300 15,000 KBU 7010/6 ST 0, ,000 9,000 12,000 KBU 010/6 ST 0, ,000 9,000 12,000 KBU 9510/6 ST 0,30 All INOX brushes are degreased ,000 9,00 15,000 KBU 5010/6 INOX 0, ,000 9,00 15,000 KBU 7010/6 INOX 0, ,000 9,00 15,000 KBU 7010/6 INOX 0, ,00 7,00 12,000 KBU 010/6 INOX 0, ,00 7,00 12,000 KBU 9510/6 INOX 0,30 Silicon carbide (SiC) plastic filament ,000 9,00 15,000 KBU 7010/6 SiC 120 0, ,00 7,00 12,000 KBU 010/6 SiC 120 0, ,00 7,00 12,000 KBU 9510/6 SiC 120 1,10 Ceramic oxide grain (CO) plastic filament ,000 9,00 15,000 KBU 7010/6 CO 120 0, ,00 7,00 12,000 KBU 010/6 CO 120 0, ,00 7,00 12,000 KBU 9510/6 CO 120 1,10 Catalogue 37

38 Shank mounted wheel brushes crimped S = 6 mm H RBU Universally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Highly flexible, enabling optimal adjustment For POS type, please add POS to the to the workpiece contour. description. For the best results, use a tool drive with a minimum output of 300 watts. F H 10x 1 10 escription Steel wire (ST) ,000 15,000 20,000 RBU 2004/6 ST 0, ,000 15,000 20,000 RBU 3006/6 ST 0, ,000 15,000 20,000 RBU 3009/6 ST 0, ,000 13,500 1,000 RBU 4009/6 ST 0, ,500 11,300 15,000 RBU 5004/6 ST 0, ,500 11,300 15,000 RBU 5010/6 ST 0, ,500 11,300 15,000 RBU 5015/6 ST 0, ,500 11,300 15,000 RBU 6010/6 ST 0, ,500 11,300 15,000 RBU 6015/6 ST 0, ,500 11,300 15,000 RBU 7004/6 ST 0, ,500 11,300 15,000 RBU 7010/6 ST 0, ,500 11,300 15,000 RBU 7015/6 ST 0, ,000 9,000 12,000 RBU 004/6 ST 0, ,000 9,000 12,000 RBU 015/6 ST 0, ,000 9,000 12,000 RBU 10010/6 ST 0, ,000 13,000 20,000 RBU 2004/6 INOX 0, ,000 13,000 20,000 RBU 3006/6 INOX 0, ,000 13,000 20,000 RBU 3009/6 INOX 0, ,200 11,700 1,000 RBU 4009/6 INOX 0, ,000 9,00 15,000 RBU 5004/6 INOX 0, ,000 9,00 15,000 RBU 5010/6 INOX 0, ,000 9,00 15,000 RBU 5015/6 INOX 0, ,000 9,00 15,000 RBU 6010/6 INOX 0, ,000 9,00 15,000 RBU 6015/6 INOX 0, ,000 9,00 15,000 RBU 7004/6 INOX 0, ,000 9,00 15,000 RBU 7010/6 INOX 0, ,000 9,00 15,000 RBU 7015/6 INOX 0, ,000 9,00 15,000 RBU 7015/6 INOX 0, ,00 7,00 12,000 RBU 004/6 INOX 0, ,00 7,00 12,000 RBU 010/6 INOX 0, ,00 7,00 12,000 RBU 015/6 INOX 0, ,00 7,00 12,000 RBU 015/6 INOX 0, ,00 7,00 12,000 RBU 10010/6 INOX 0,30 Brass wire (MES) ,000 13,000 20,000 RBU 2004/6 MES 0, ,000 13,000 20,000 RBU 3006/6 MES 0, ,200 11,700 1,000 RBU 4009/6 MES 0, ,000 9,00 15,000 RBU 5015/6 MES 0, ,000 9,00 15,000 RBU 7015/6 MES 0, ,00 7,00 12,000 RBU 015/6 MES 0,30 Continued on next page Catalogue 3

39 Shank mounted wheel brushes crimped F H 10x 1 10 escription Silicon carbide (SiC) plastic filament ,000 9,00 15,000 RBU 5004/6 SiC 120 0, ,000 9,00 15,000 RBU 5010/6 SiC 10 0, ,000 9,00 15,000 RBU 5015/6 SiC 10 0, ,000 9,00 15,000 RBU 700/6 SiC 120 0, ,000 9,00 15,000 RBU 7015/6 SiC 10 0, ,00 7,00 12,000 RBU 00/6 SiC 120 0, ,00 7,00 12,000 RBU 015/6 SiC 10 0,90 Ceramic oxide grain (CO) plastic filament ,000 9,00 15,000 RBU 5004/6 CO 120 0, ,000 9,00 15,000 RBU 5015/6 CO 120 1, ,000 9,00 15,000 RBU 700/6 CO 120 0, ,000 9,00 15,000 RBU 7015/6 CO 120 1, ,00 7,00 12,000 RBU 00/6 CO 120 0, ,00 7,00 12,000 RBU 015/6 CO 120 1,10 RBV, encapsulated Suitable for medium-duty brushing such as deburring, cleaning and derusting. Focused working thanks to high dimensional stability. minimum output of 300 For the best results, use a tool drive with a watts. S = 6 mm F H 1 escription Steel wire (ST) ST = brass-plated steel wire ,500 11,300 15,000 RBV 6307/6 ST 0,30 H Catalogue 39

40 Shank mounted wheel brushes knotted S = 6 mm H RBG Aggressive brush for cleaning, derusting and work on weld seams. Optimal access to hard-to-reach areas such as grooves and recesses. Aggressive brushing effect due to the very stiff wire knots. For the best results, use a tool drive with a minimum output of 500 watts. For POS type, please add POS to the description. F H Knots [pcs.] 10x 1 10 escription Steel wire (ST) ,500 1,00 25,000 RBG 7006/6 ST 0, ,500 1,00 25,000 RBG 7006/6 ST 0, ,500 1,00 25,000 RBG 7012/6 ST 0, ,500 1,00 25,000 RBG 7012/6 ST 0, ,000 15,000 20,000 RBG 10012/6 ST 0, ,000 15,000 20,000 RBG 10012/6 ST 0,50 All INOX brushes are degreased ,000 16,300 25,000 RBG 7006/6 INOX 0, ,000 16,300 25,000 RBG 7006/6 INOX 0, ,000 16,300 25,000 RBG 7012/6 INOX 0, ,000 16,300 25,000 RBG 7012/6 INOX 0, ,000 13,000 20,000 RBG 10012/6 INOX 0, ,000 13,000 20,000 RBG 10012/6 INOX 0,50 Brush sets BSO Set with different wheel, cup and end brushes with a 6 mm shank. One BSO 5500 ST set contains 0 pieces: One BSO 5600 ST set contains 23 pieces: 10 x RBU 3006/6 ST 0,20 4 x TBU 5010/6 ST 0,30 10 x RBU 4009/6 ST 0,20 10 x PBU 2022/6 ST 0,50 10 x RBU 5015/6 ST 0,20 5 x RBU 5015/6 ST 0,20 10 x RBU 7015/6 ST 0,30 4 x RBG 7006/6 ST 0,35 10 x TBU 5010/6 ST 0,30 10 x PBU 1010/6 ST 0,35 One BSO 5600 INOX set contains 23 pieces: 10 x PBU 1516/6 ST 0,35 4 x TBU 5010/6 INOX 0,30 10 x PBU 2022/6 ST 0,50 10 x PBU 2022/6 INOX 0,50 5 x RBU 5015/6 INOX 0,20 4 x RBG 7006/6 INOX 0,35 Selection of the most common types. Promotional display box. EAN escription BSO 5500 ST BSO 5600 ST BSO 5600 INOX Catalogue 40

41 Fine grinding and polishing tools 4 Tool drives 9 Wheel brushes crimped WBU, for burnishing machines Excellent for surface structuring work on workpieces with large surfaces. The special wire construction with cord wire filament (IT) is particularly suitable for heavy-duty brushing and aggressive brushing. Can be used with all common burnishing machines thanks to the arbor hole with 4 keyways. A A F 1 escription Steel wire (IT, ST) IT ST = stranded, brass-plated steel wire ,000 4,500 6,000 WBU /19,1 IT ST 0, ,400 3,900 6,000 WBU /19,1 INOX 0,20 Silicon carbide (SiC) plastic filament ,400 3,900 6,000 WBU /19,1 SiC 0 1,27 For detailed information and ordering data on other drum tools and roller sets, please refer to catalogue section 4. For detailed information and ordering data on matching drum grinders, please refer to catalogue section 9. Catalogue 41

42 INOX-TOTA General information In addition to brushes with a stainless steel filament, PFER also offers brushes of the INOX-TOTA type for work on stainless steel (INOX). It is particularly well suited to use in extremely critical environments. Further information about working with stainless steel (INOX) and PFER INOX-TOTA brushes can be found on page 10. Structure of a wheel brush with arbor hole INOX-TOTA Stainless steel (INOX) Stainless steel (INOX) Industries: Optimum protection against corrosion as all components are produced from stainless steel (INOX) in quality (V2A). PFER tools for use on stainless steel Chemical and plant manufacturing Foodstuff industry Nuclear industry Stainless steel (INOX) Stainless steel (INOX) TRUST BUE INOX More PFER tools and many valuable recommendations for working with stainless steel (INOX) can be found in our PRAXIS brochure "PFER tools for use on stainless steel (INOX)". Please contact us for further details. Wheel brushes A RBGIT CT, COMBITWIST / RBGIT PE CT, Pipeline, COMBITWIST RBGIT CT: Very aggressive brush. Suitable for heavy-duty brushing such as removal of heat discolouration, deburring, cleaning of weld seams and removal of adhesive residues. RBGIT PE CT: Very aggressive and robust brush that is able to withstand high mechanical loads. Perfect for heavy-duty brushing in pipeline and container construction. Maximum economic efficiency due to the For optimum results, use on powerful longest tool life and the highest stock speed-adjustable angle grinders. removal. High level of comfort thanks to smooth PFERVAUE: running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. RBGIT PE CT: Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams. A F Knots [pcs.] 1 escription COMBITWIST type All INOX brushes are degreased ,000 12,500 12,500 POS RBGIT 11512/22,2 CT INOX 0, ,000 12,500 12,500 POS RBGIT 11506/22,2 PE CT INOX 0,50 Arbor BO /22, (751930): For knotted wheel brushes up to a diameter of 125 mm with a A of 22.2 mm. For more information: etailed information on accessories can be found on pages 55 and 56. Catalogue 42

43 INOX-TOTA Shank mounted end brushes PBUIT / PBGSIT, SINGETWIST Suitable for light brushing such as deburring, cleaning, and removal of heat discolouration. PBUIT: Optimal access to hard-to-reach PBGSIT: Optimal access to hard-to-reach areas such as drilled holes and cavities as areas such as inside corners as the knot is the wires spread out upon rotation. less likely to unravel. PBUIT S = 6 mm C PBGSIT C S= 6 mm C F 10 escription EAN All INOX brushes are degreased. crimped ,200 11,700 1,000 PBUIT 1516/6 INOX 0, ,200 11,700 1,000 PBUIT 1516/6 INOX 0, ,200 11,700 1,000 PBUIT 2022/6 INOX 0, ,200 11,700 1,000 PBUIT 2022/6 INOX 0,20 knotted SINGETWIST knot ,000 6,500 10,000 PBGSIT 1010/6 INOX 0, ,000 6,500 10,000 PBGSIT 1010/6 INOX 0,35 Catalogue 43

44 INOX-TOTA Shank mounted wheel brushes S = 6 mm RBUIT / RBGIT Universally suitable for cleaning, deburring, and removal of heat discolouration. RBUIT: Highly flexible, enabling optimal RBGIT: Aggressive brushing effect due to adjustment to the workpiece contour. the very stiff wire knots. H F Knots [pcs.] H 10 escription All INOX brushes are degreased. crimped ,000 13,000 20,000 RBUIT 3006/6 INOX 0, ,000 9,00 15,000 RBUIT 5015/6 INOX 0, ,000 9,00 15,000 RBUIT 7015/6 INOX 0, ,000 9,00 15,000 RBUIT 7015/6 INOX 0, ,00 7,00 12,000 RBUIT 015/6 INOX 0, ,00 7,00 12,000 RBUIT 015/6 INOX 0,30 knotted ,000 16,300 25,000 RBGIT 7006/6 INOX 0,35 Shank mounted bevel brushes 30 S= 6 mm KBUIT Excellent for medium-duty brushing such as deburring, cleaning, and removal of heat discolouration. Optimal access to hard-to-reach areas such For the best results, use a tool drive with a as inner edges, grooves and keyways. minimum output of 300 watts. H F H 10 escription All INOX brushes are degreased ,000 9,00 15,000 KBUIT 5010/6 INOX 0, ,000 9,00 15,000 KBUIT 7010/6 INOX 0, ,000 9,00 15,000 KBUIT 7010/6 INOX 0, ,00 7,00 12,000 KBUIT 010/6 INOX 0,30 Catalogue 44

45 Miniature brushes General information PFER offers a wide range of miniature brushes for precision work. These can be used on flexible shaft drives, micro motors or electric grinders. Outstanding precision and efficiency in work on delicate workpieces. Industries: Medical equipment Jewellery sector Electronics industry Aerospace industry Tool and mould construction End brushes, crimped PBU Suitable for light brushing such as deburring, cleaning and polishing. Optimal access to hard-to-reach areas such as drilled holes and cavities as the wires spread out upon rotation. Please complete the description with the desired shank diameter ( s ). Grit size IA 400 = 46 Use brushes with natural filaments with polishing paste to achieve the optimum polishing result. etailed information and ordering data on polishing pastes can be found in catalogue section 4. Accessories: Polishing pastes S C C F S escription Steel wire (ST) ,000 15,000 25, PBU 0505/... ST 0, ,000 10,000 25, PBU 0505/... INOX 0,10 Brass wire (MES) ,000 10,000 25, PBU 0505/... MES 0,10 Silicon carbide (SiC) plastic filament ,200 5,000 25, PBU 0505/... SiC 320 0, ,200 5,000 25, PBU 0505/... SiC 00 0,25 Aluminium oxide (AO) plastic filament ,200 5,000 25, PBU 0505/... AO 320 0, ,200 5,000 25, PBU 0505/... AO 600 0,30 iamond (IA) plastic filament ,200 5,000 25, PBU 0505/... IA 400 0,40 Nylon plastic filament ,200 5,000 25, PBU 0505/... Nylon 0,20 Natural bristles white (SBW) ,000 10,000 25, PBU 0505/... SBW Natural bristles black (SBS) ,000 10,000 25, PBU 0505/... SBS Natural bristles goat hair (ZHW) ,000 10,000 25, PBU 0505/... ZHW Brushes with a shank diameter of 3.1 mm are available on request. Catalogue 45

46 Miniature brushes Cup brushes, crimped TBU Suitable for light brushing such as deburring, cleaning and polishing. Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece. Highly flexible, enabling optimal adjustment to the workpiece contour. Use brushes with natural filaments with polishing paste to achieve the optimum polishing result. etailed information and ordering data on polishing pastes can be found in catalogue section 4. S C Please complete the description with the desired shank diameter ( s ). Grit size IA 400 = 46 Accessories: Polishing pastes C F H S escription Steel wire (ST) ,000 10,000 20, TBU 1503/... ST 0, ,000 10,000 1, TBU 103/... ST 0, ,000 10,000 20, TBU 1503/... INOX 0, ,000 10,000 1, TBU 103/... INOX 0,10 Brass wire (MES) ,000 10,000 20, TBU 1503/... MES 0, ,000 10,000 1, TBU 103/... MES 0,10 Silicon carbide (SiC) plastic filament ,200 5,000 1, TBU 103/... SiC 320 0, ,200 5,000 1, TBU 103/... SiC 00 0,25 Aluminium oxide (AO) plastic filament ,200 5,000 1, TBU 103/... AO 320 0, ,200 5,000 1, TBU 103/... AO 600 0,30 iamond (IA) plastic filament ,000 10,000 1, TBU 103/... IA 400 0,40 Nylon plastic filament ,200 5,000 20, TBU 1503/... Nylon 0, ,200 5,000 1, TBU 103/... Nylon 0,15 Natural bristles white (SBW) ,000 10,000 20, TBU 1503/... SBW ,000 10,000 1, TBU 103/... SBW Natural bristles black (SBS) ,000 10,000 20, TBU 1503/... SBS ,000 10,000 1, TBU 103/... SBS Natural bristles goat hair (ZHW) ,000 10,000 20, TBU 1503/... ZHW ,000 10,000 1, TBU 103/... ZHW Brushes with a shank diameter of 3.1 mm are available on request. Catalogue 46

47 Miniature brushes Wheel brushes, crimped RBU Suitable for light brushing such as deburring, cleaning and polishing. Enables focused working in hard-to-reach areas. Use brushes with natural filaments with polishing paste to achieve the optimum polishing result. etailed information and ordering data on polishing pastes can be found in catalogue section 4. Please complete the description with the desired shank diameter ( s ). Grit size IA 400 = 46 Accessories: Polishing pastes S F H S escription Steel wire (ST) ,000 10,000 12, RBU 1602/... ST 0, ,000 10,000 12, RBU 1902/... ST 0, ,000 10,000 12, RBU 2202/... ST 0, ,000 10,000 12, RBU 3202/... ST 0, ,000 10,000 12, RBU 1602/... INOX 0, ,000 10,000 12, RBU 1902/... INOX 0, ,000 10,000 12, RBU 2202/... INOX 0, ,000 10,000 12, RBU 3202/... INOX 0,10 Brass wire (MES) ,000 10,000 12, RBU 1602/... MES 0, ,000 10,000 12, RBU 1902/... MES 0, ,000 10,000 12, RBU 2202/... MES 0,10 Silicon carbide (SiC) plastic filament ,200 5,000 12, RBU 2202/... SiC 320 0, ,200 5,000 12, RBU 2202/... SiC 00 0,25 Aluminium oxide (AO) plastic filament ,200 5,000 12, RBU 2202/... AO 320 0, ,200 5,000 12, RBU 2202/... AO 600 0,30 iamond (IA) plastic filament ,200 5,000 12, RBU 2202/... IA 400 0,40 Nylon plastic filament ,200 5,000 12, RBU 2202/... Nylon 0,15 Natural bristles white (SBW) ,000 10,000 12, RBU 1602/... SBW ,000 10,000 12, RBU 1902/... SBW ,000 10,000 12, RBU 2202/... SBW Natural bristles black (SBS) ,000 10,000 12, RBU 1602/... SBS ,000 10,000 12, RBU 1902/... SBS ,000 10,000 12, RBU 2202/... SBS Natural bristles goat hair (ZHW) ,000 10,000 12, RBU 1602/... ZHW ,000 10,000 12, RBU 2202/... ZHW Brushes with a shank diameter of 3.1 mm are available on request. Catalogue 47

48 Tube brushes Tube brushes IBU, with thread Particularly suitable for deburring and cleaning pipes, threads, coupling sleeves and cylinders. In addition to a thread, some versions also have a shank: M6 thread = 6 mm shank 3/ thread = 10 mm shank T Can be clamped in collets thanks to integrated shank. Insert into the workpiece before it starts to rotate. Use with clockwise rotation. Brushes with an SiC filament have a filament material diameter of 1.00 mm. Please complete the description with the desired filament material and filament material diameter ( F ). BSW = British Standard Whitworth Safety notes: When using tube brushes inside pipes, holes, grooves, etc., deviations from the specified maximum permitted rotational speed are possible in consultation with PFER. T F Filament material Steel INOX Brass SiC 10 escription 0 M , IBU 00/M M , IBU 100/M M , IBU 120/M M , IBU 130/M M , IBU 150/M M , IBU 160/M M , IBU 10/M M , IBU 200/M / , IBU 22100/3/ BSW / , IBU 25100/3/ BSW / , IBU 30100/3/ BSW / , IBU 32100/1/2 BSW / , IBU 3100/1/2 BSW / , IBU 40100/1/2 BSW / , IBU 44100/1/2 BSW / ,000 5 IBU 50100/1/2 BSW / ,000 5 IBU 57100/1/2 BSW / ,000 5 IBU 63100/1/2 BSW / ,000 5 IBU 69100/1/2 BSW / ,000 1 IBU 75100/1/2 BSW / ,000 1 IBU 2100/1/2 BSW / ,000 1 IBU /1/2 BSW... Catalogue 4

49 Tube brushes Accessories Quick-change handle SWG Suitable for manual work with tube brushes. The SWG-6 quick-change handle can be used with all group 10 collets to clamp additional shank diameters. etailed information and ordering data can be found in catalogue section 9 Tool drives. Comfortable to use thanks to ergonomic Please complete the description with the shape. desired thread. BSW = British Standard Whitworth Combine with the IBUV extensions in order PFERVAUE: to access hard-to-reach areas. The available length combinations can be found below. Thread M6 3/ BSW 1/2 BSW Collet 6 mm escription SWG SWG-6 Extension IBUV, wire stem IBUS Suitable for work with tube brushes with a thread. Please note the outer diameter of the screw socket: M6 = 12 mm 3/ = 12 mm 1/2 = 16 mm Optimal access to hard-to-reach areas. Extension SWG IBUS 300 IBUV 1000 To achieve a larger overall length, combine without ,000 IBUV ,300 IBUV ,135 1,300 2,000 the IBUV extensions and IBUS wire shanks with one another or with the SWG quickchange handles. Please complete the description with the desired thread. IBUV IBUS Thread M6 3/ BSW 1/2 BSW escription IBUV , IBUV IBUS , IBUS Catalogue 49

50 Tube brushes Tube brushes IBU, shank-mounted For light cleaning and deburring work on threaded holes or recesses, e.g. keyways. s Highly flexible, enabling optimal adjustment to the workpiece contour. onger tool life due to the design of the rotating wire. Insert into the workpiece before it starts to rotate. Use with clockwise rotation. Please complete the description with the desired filament material and filament material diameter ( F ). Safety notes: When using tube brushes inside pipes, holes, grooves, etc., deviations from the specified maximum permitted rotational speed are possible in consultation with PFER. S Steel 0.12 Filament material / F Steel 0.20 INOX 0.12 INOX 0.20 escription , IBU 0625/3, , IBU 025/3, , IBU 1025/3, , IBU 1325/3, , IBU 1625/3, , IBU 1925/3, , IBU 2225/3, , IBU 2525/3, , IBU 2925/3, , IBU 3225/3,... Catalogue 50

51 Tube brushes Tube brushes IBU, shank-mounted For deburring and cleaning holes and cross holes. Enable outstanding precision and efficiency in work on delicate workpieces. Highly flexible, enabling optimal adjustment to the workpiece contour. The dimensional accuracy of the workpieces remains unchanged. Safety notes: When using tube brushes inside pipes, holes, grooves, etc., deviations from the specified maximum permitted rotational speed are possible in consultation with PFER. s Insert into the workpiece before it starts to rotate. Use with clockwise rotation. S F 10 escription Aluminium oxide (AO) 2000 plastic filament ,000 IBU 0,712/0,4 AO ,20 Silicon carbide (SiC) 1000 plastic filament ,000 IBU 1,212/0,5 SiC , ,000 IBU 1,91/0,7 SiC , ,000 IBU 2,21/0,9 SiC , ,000 IBU 2,625/1,0 SiC , ,000 IBU 3,225/1,7 SiC , ,000 IBU 3,525/1,7 SiC ,25 Aluminium oxide (AO) 600 plastic filament ,000 IBU 4,225/2,2 AO 600 0, ,000 IBU 4,25/2,2 AO 600 0, ,000 IBU 5,525/2,2 AO 600 0, ,000 IBU 6,625/2,9 AO 600 0, ,000 IBU,225/2,9 AO 600 0, ,000 IBU 9,25/3,2 AO 600 0, ,000 IBU 11,525/3,2 AO 600 0, ,000 IBU 1325/3,7 AO 600 0, ,000 IBU 1625/3,7 AO 600 0, ,000 IBU 2025/4,7 AO 600 0, ,000 IBU 2525/4,7 AO 600 0,30 Catalogue 51

52 Tube brushes Tube brushes IBU, with eyelet Specially suited to brushing in manual applications. Enable outstanding precision and efficiency Please complete the description with the in work on delicate workpieces. desired filament material and filament material diameter ( F ). Optimal access to hard-to-reach areas such as the inner surfaces of pipes and drilled holes. Steel 0.10 Steel 0.15 INOX 0.10 Filament material / F INOX 0.15 Brass 0.10 Brass 0.15 Nylon 0.10 Nylon 0.15 Nylon 0.20 Nylon 0.30 escription IBU IBU IBU IBU IBU IBU IBU IBU IBU IBU IBU IBU Catalogue 52

53 Scratch brushes Scratch brushes PFER offers an extensive range of scratch brushes with various shapes and filament materials. Optimum presentation on the PFERTOO- CENTER using hanging hole and labelling with EAN number, description and filament material. Ordering note: Please complete the description with the desired filament material and filament diameter. HBU, universal use General-use scratch brush for all light cleaning and rust removal jobs. Rows Filament material Steel 0.35 INOX 0.30 Brass 0.30 escription HBU HBU HBU HBU HBU HBU Bulk pack HBU 30 GP HBU 40 GP HBU 50 GP... HBU H, ong Handle Suitable for cleaning, derusting, and cleaning of weld seams and surfaces. Extra-long handle. Rows Filament material Steel 0.35 escription HBU H HBU H HBK, for fillet welds Suitable for cleaning and derusting fillet welds and V-shaped welds thanks to the V shape. Rows Filament material Steel 0.35 INOX 0.35 escription HBK HBG, curved Excellent for cleaning work in hard-to-reach areas, e.g. angles, corners and pipes. Steel = brass-plated steel wire. Rows Filament material Steel 0.30 INOX 0.30 Brass 0.30 escription HBG Catalogue 53

54 Scratch brushes Scratch brushes HBUP, plastic body Universally suitable for all light cleaning and derusting work. The version with a stainless steel filament is approved for use in the foodstuff industry. Safe and ergonomic working thanks to curved two-component handle. Rows Filament material Steel 0.40 INOX 0.40 Brass 0.30 escription HBUP HBUP HBUP HBUP HBUP HBZ, for spark plugs Particularly suited to cleaning spark plugs, small workpieces and tools. Rows Filament material Brass 0.15 escription HBZ HBB, block brushes with a handle Wire brush with handle for general cleaning work on large surfaces. Rows Filament material Steel 0.45 escription HBB 0... HBFM, for precision mechanics Excellent for light brushing on fine surfaces. The filament material diameter of 0.15 mm allows a smooth brushing action and produces a fine surface. Rows Filament material Steel 0.15 INOX 0.15 Brass 0.15 escription HBFM HBF, for files Suitable for cleaning files. Rows Filament material Steel escription HBF 10 ST 0,15 Catalogue 54

55 Accessories Arbors To enable brushes with arbor holes to be used on tool drives with collets, PFER supplies a corresponding arbor for each brush type. Examples of brushes with arbors Secure hold of the brush thanks to highly accurate fit. BO Enables the use of wheel and composite disc brushes with an arbor hole on tool drives with a collet, e.g. electric straight grinders and flexible shaft drives. Safety notes: Arbors must only be used for brush diameters up to a maximum of 200 mm. S BO /22, BO / BO 12/22,2 200 BO 12/22, BO 12/22, BO 12/22, S Suitable for brush diameter Suitable for hole diameter A / M Suitable for EAN escription Arbors for wheel brushes /14 Wheel brushes, crimped (RBU) 22, 24, BO / Wheel brushes, knotted (RBG) 1, 19, 20, 21, BO /22, Wheel brushes, crimped (RBU), Wheel brushes, knotted (RBG) Wheel brushes, crimped (RBU), Wheel brushes, knotted (RBG) 1, 19, 20, 21, 22, 24, 25, 27 21, 22, 23, 24, 25, 27, BO 12/22, BO 12/22,2 200 Arbors for composite disc brushes Composite disc brushes (BU) 29, BO 12/22, Composite disc brushes (BU) 29, BO 12/22, BO, POISCRATCH For attaching POISCRATCH brushes to straight grinders, flexible shafts or power drills. Safety notes: Exclusively for use with POISCRATCH brushes. T S T S Suitable for EAN escription M14x2 Wheel brushes crimped (RBU), POISCRATCH type BO /M14 Catalogue 55

56 Accessories Adapter PFER offers various adapter sets for wheel brushes with arbor holes. Brushes can be used on all tool drives as the hole diameter is adjusted to the required dimension. Secure hold of the brush thanks to highly accurate fit. Adapter set AK 32 and AK 32-2 AK 32: Suitable for wheel brushes with a brush diameter as from 150 mm in the narrow type. AK 32-2: Suitable for wheel brushes with a brush diameter as from 150 mm in the wide type. Use for applications that produce little heat and require little pressure. Suitable for Hole diameter A included [mm/inches] RBU, narrow face dia. 150 mm / 1.0 / 14.0 / 12.0 / 25.4 (1) / 22.2 (7/) / 16.0 (5/) / 12.7 (1/2) RBU, wide face dia. 150 mm 24, / 20.0 / 1.0 / 14.0 / 12.0 / 25.4 (1) / 22.2 (7/) / 19.2 (.750) / 16.0 (5/) / 12.7 (1/2) RBU, wide type, dia. 150 mm, RBUP, composite type, dia. 150 mm RBG, knotted wheel brushes, dia mm, RBU, deburring brush type, dia mm Adapter pairs AM 50. and APM 50. EAN escription AS AK AS AK 32-2 AM 50,: Suitable for wheel brushes with a brush diameter as from 150 mm in the wide and composite type. APM 50,: Suitable for knotted wheel brushes with a diameter of mm and crimped wheel brushes designed as deburring types. Particularly suitable for applications which produce a lot of heat and involve high pressure. Suitable for Hole diameter A included [mm/inches] 24, 25, 27, 2 AM 50.: A set consists of 2 individual adapters. APM 50.: A set consists of 3 adapter pairs. EAN escription AP AM 50,/14, AP AM 50,/16, AP AM 50,/20, AP AM 50,/22, AP AM 50,/25, AP AM 50,/30, AP AM 50,/32, AP AM 50,/35,0 21, 23, /1.0/ APM 50,/ /25.4/ APM 50,/22, /35.0/ APM 50,/ /201 Subject to technical modifications. Printed in Germany Catalogue 56 info@pferd.com PFER quality certified according to ISO 9001.