MP-Series Food Grade Motors

Size: px

Start display at page:

Download "MP-Series Food Grade Motors"

Eustace Morgan
5 years ago
Views:

MP-Series Food Grade Motors MP-Series (Bulletin MPF) food-grade motors combine the characteristics of the MP-Series low-inertia servo motors with features specifically designed to meet the unique

1 MP-Series Food Grade Motors MP-Series (Bulletin MPF) food-grade motors combine the characteristics of the MP-Series low-inertia servo motors with features specifically designed to meet the unique needs of many food and beverage applications. These high-performance servo motors address the challenges of food environments by incorporating food-grade paint and shaft seal, along with noncorrosive fasteners and stainless steel shaft. For meat and poultry applications, and for applications with high pressure wash and caustic chemicals, the MP-Series stainless-steel servo motors are recommended. MP-Series Food Grade Motor Features Attribute Value Main characteristics Features Motor type Environmental rating Certifications Continuous stall torque Peak stall torque Speed Motor rated output Compatible servo drives Typical applications Configurable winding options, brakes, and encoder feedback Low rotor inertia Food-grade epoxy coated 200V and 400V-class windings Shaft-end threaded hole SpeedTec-ready DIN connectors, rotates 180 Standard IEC 72-1 mounting dimensions Brushless AC synchronous servo motors IP66/IP67 with shaft seal (standard) and use of environmentally sealed cable connectors Food grade grease on shaft seal Bulletin MPF rotary motors are UL Recognized components to applicable UL and CSA standards. CE marked for all applicable directives. Refer to for more information N m ( lb in) N m ( lb in) Up to 5000 rpm kw Kinetix 5500 (1) Kinetix 6200/6500 Kinetix 6000 Kinetix 300/350 Kinetix 2000 Ultra3000 Food packaging Volumetric filling Form, fill, seal Food handling For meat and poultry applications, the MP-Series Stainless Steel motors are recommended (1) Requires the 2198-H2DCK Hiperface-to-DSL feedback converter kit. MP-Series (200V-class) food-grade motors require the 2198-H2DCK (series B or later) converter kit. 78 Rockwell Automation Publication GMC-TD001F-EN-P - April 2014

2 Catalog Numbers - MP-Series Food Grade Motors Catalog numbers consist of various characters, each of which identifies a specific option for that component. Use the catalog numbering table chart below to understand the configuration of your motor. For questions regarding product availability, contact your Allen-Bradley distributor. MP F - x xx xx x - x J 7 x B A Factory Options A = Standard Mounting Flange B = IEC metric (oversized), free mounting holes (type FF) Brake 2 = No brake 4 = 24V DC brake Connectors 7 = Circular (SpeedTec) DIN connector, right angle, 180 rotatable Enclosure/Shaft Key J = IP66/IP67 housing/keyed shaft Feedback M = Multi-turn, 1024 sin/cos, absolute encoder (Hiperface protocol) S = Single-turn, 1024 sin/cos, absolute encoder (Hiperface protocol) Rated Speed (1) F = 3000 rpm H = 3500 rpm K = 4000 rpm P = 5000 rpm Magnet Stack Length (1) 10 = 25.4 mm (1.0 in.) 20 = 50.8 mm (2.0 in.) 30 = 76.2 mm (3.0 in.) 40 = mm (4.0 in.) Frame Size 3 = 100 mm 4 = 115 mm 45 = 130 mm 5 = 165 mm Voltage Class A = 200V B = 400V Series Type F = Food grade enclosure (including shaft seal) Series MP = Premium permanent magnet rotary servo motor (1) Not all combinations are available. Only the configurations for rated speed and magnet stack length, as listed in MP-Series Food Grade (200V-class) Performance Specifications on page 81 and MP-Series Food Grade Motor (400V-class) Performance Specifications on page 81, are available. Use Motion Analyzer software to size and select motors for your application. Rockwell Automation Publication GMC-TD001F-EN-P - April

3 MP-Series Food Grade Motor High Resolution Encoders MP-Series Food Grade motors are available with high performance encoders with a choice of single-turn (-S) or multi-turn (-M) high resolution feedback: Up to 2 million counts per revolution for smooth performance. Single-turn encoder provides high-resolution absolute position feedback within one turn. Multi-turn encoder provides high-resolution absolute position feedback within 4096 turns. Motor Connector/Cable Compatibility MP-Series (Bulletin MPF) motors are equipped with SpeedTec-ready DIN connectors. SpeedTec-ready DIN Connectors SpeedTec DIN (M7) Cable Plug MPF-A/Bxxx motors Receives M4 and M7 cable plugs (O-ring required for M4) Attach M7 cable plug with one-quarter turn 2090-CFBM7DF-CEAAxx (standard, non-flex) flying-lead, feedback cables 2090-CFBM7DD-CEAAxx (standard, non-flex) drive-end connector, feedback cables 2090-CFBM7DF-CEAFxx (continuous-flex) flying-lead, feedback cables 2090-CFBM7DD-CEAFxx (continuous-flex) drive-end connector, feedback cables 2090-CFBM7DF-CDAFxx (continuous-flex) flying-lead, feedback cables 2090-CPWM7DF-xxAAxx (standard, non-flex) power-only cables 2090-CPBM7DF-xxAAxx (standard, non-flex) power/brake cables 2090-CPWM7DF-xxAFxx (continuous-flex) power-only cables 2090-CPBM7DF-xxAFxx (continuous-flex) power/brake cables MP-Series Food Grade Motor Options MP-Series Food Grade motors are available with these options: 24V DC brake. The positive air-pressure kit (catalog number MPF-7-AIR-PURGE) is mounted on the feedback connector to provide positive air pressure to further reduce the chance of contamination inside the motor. O-ring = Air Fitting Shaft seal kits are available for field replacement. Shaft seals are made of PTFE and the kit includes a lubricant to reduce wear. IMPORTANT Shaft seals are subject to wear and require periodic inspection and replacement. Replacement is recommended every 3 months, not to exceed 12 months, depending on use. 80 Rockwell Automation Publication GMC-TD001F-EN-P - April 2014

4 Shaft Seal Kit Catalog Numbers MPF-A3xx and MPF-B3xx MPF-A4xx and MPF-B4xx MPF-A45xx and MPF-B45xx MPF-A5xx and MPF-B5xx Shaft Seal Kit Cat. No. MPF-SST-A3B3 MPF-SST-A4B4 MPF-SST-A45B45 MPF-SST-F165 Refer to the MP-Series Food Grade Servo Motor Installation Instructions, publication MP-IN004, for motor accessory information. Technical Specifications - MP-Series Food Grade Motors MP-Series Food Grade (200V-class) Performance Specifications Speed, max rpm Continuous Stall Torque Peak Stall Torque MP-Series Food Grade Motor (400V-class) Performance Specifications Motor Rated Output kw Speed at Motor Rated Output rpm (1) Refer to MP-Series Low Inertia Motor (200V-class) Performance Specifications on page 54 for brake rotor inertia and brake motor weight. Rotor Inertia (1) kg-m 2 (lb in s 2 ) MPF-A310P (14) 3.61 (32) ( ) 2.8 (6.1) MPF-A320P (27) 7.91 (70) MPF-A320H (27) 7.91 (70) ( ) 3.8 (8.3) MPF-A330P (37) 11.1 (98) (0.0010) 4.7 (10) MPF-A430P (53) 19.8 (175) MPF-A430H (55) 19.8 (175) (0.0033) 5.6 (12) MPF-A4530K (72) 20.3 (180) (0.0036) 7.4 (16) MPF-A4540F (90) 27.1 (240) (0.0046) 8.7 (19) MPF-A540K (172) 48.6 (430) (0.013) 16 (35) Speed, max rpm Continuous Stall Torque Peak Stall Torque Motor Rated Output kw Speed at Motor Rated Output rpm (1) Refer to MP-Series Low Inertia Motor (200V-class) Performance Specifications on page 54 for brake rotor inertia and brake motor weight. Rotor Inertia (1) kg-m 2 (lb in s 2 ) MPF-B310P (14) 3.61 (32) ( ) 2.8 (6.1) MPF-B320P (27) 7.91 (70) ( ) 3.8 (8.3) MPF-B330P (37) 11.1 (98) (0.0010) 4.7 (10) MPF-B430P (58) 19.8 (175) (0.0033) 5.6 (12) MPF-B4530K (73) 20.3 (180) (0.0036) 7.4 (16) MPF-B4540F (90) 27.1 (240) (0.0046) 8.7 (19) MPF-B540K (172) 48.6 (430) (0.013) 16 (35) Motor Weight, approx (1) Motor Weight, approx (1) Rockwell Automation Publication GMC-TD001F-EN-P - April

5 MP-Series Food Grade Motor Brake Specifications MPF-A/B310 Backlash, max (brake engaged) arc minutes MP-Series Food Grade Motor Load Force Ratings Bulletin MPF motors are capable of operating with the maximum radial or maximum axial shaft loads listed in the following tables. Radial loads listed are applied in the middle of the shaft extension. The tables below represent an L 10 bearing fatigue life of 20,000 hours. This 20,000-hour life does not account for possible application-specific life reduction that can occur due to bearing grease contamination from external sources. Maximum operating speed is limited by motor winding. Radial Load Force Ratings MPF-xxxxx-xJ7xAB Load Forces Holding Torque Coil Current at 24V DC A Release ms Brake Response Time Engage (by using external arc suppression device) MOV ms Diode ms Brake Rotor Inertia kg-m 2 (lb in s 2 ) ( ) 3.8 (8.3) MPF-A/B (37) ( ) 4.7 (10) MPF-A/B (0.0011) 5.7 (13) MPF-A/B (0.0038) 7.4 (16) MPF-A/B (90) (0.0039) 9.2 (20) MPF-A/B (0.0050) 11 (24) MPF-A/B (250) (0.0139) 19 (41) 500 rpm 1000 rpm 2000 rpm 3000 rpm 3500 rpm 4000 rpm Brake Motor Weight, approx 5000 rpm MPF-A/B (172) 62 (137) 49 (108) 40 (88) 36 (79) MPF-A/B (192) 69 (152) 55 (121) 45 (99) 40 (88) MPF-A/B (163) 59 (130) 49 (108) 43 (95) MPF-A/B (234) 84 (185) 67 (148) 55 (121) 49 (108) MPF-A/B (293) 105 (232) 84 (185) 73 (161) 66 (146) MPF-A/B (309) 111 (245) 89 (196) 77 (170) MPF-A/B (316) 114 (251) 99 (219) 90 (199) Radial load force applied at center of shaft extension. Axial Load Force 82 Rockwell Automation Publication GMC-TD001F-EN-P - April 2014

6 Axial Load Force Ratings (maximum radial load) 500 rpm Axial Load Force Ratings (zero radial load) 1000 rpm 2000 rpm 3000 rpm 3500 rpm 4000 rpm MPF-A/B (66) 23 (51) 16 (35) 13 (29) 11 (24) MPF-A/B (75) 25 (55) 19 (42) 15 (33) 13 (29) MPF-A/B (60) 20 (44) 16 (35) 13 (29) MPF-A/B (115) 39 (86) 29 (64) 22 (49) 19 (42) MPF-A/B (99) 34 (75) 25 (55) 21 (46) 19 (42) MPF-A/B (108) 36 (79) 27 (60) 22 (49) MPF-A/B (107) 35 (79) 30 (66) 26 (58) 500 rpm 1000 rpm 2000 rpm 3000 rpm 3500 rpm 4000 rpm MPF-A/B (108) 36 (79) 27 (60) 21 (46) 18 (40) MPF-A/B (108) 36 (79) 27 (60) 21 (46) 18 (40) MPF-A/B (79) 27 (60) 21 (46) 18 (40) MPF-A/B (152) 51 (112) 38 (84) 30 (66) 25 (55) MPF-A/B (152) 51 (112) 38 (84) 31 (68) 28 (62) MPF-A/B (152) 51 (112) 38 (84) 31 (68) MPF-A/B (149) 49 (109) 41 (92) 36 (81) 5000 rpm 5000 rpm Rockwell Automation Publication GMC-TD001F-EN-P - April

7 Dimensions - MP-Series Food Grade Motors MPF-A/B3xx, MPF-A/B4xx, MPF-A/B45xx, MPF-A/B5xx Motor Dimensions AD AD AB AB HD HD End Cap MPF-A540 MPF-B540 LB L (power/feedback) LE LD (5.16) (power) LE (feedback) L-LB LA T D See Detail A S Diameter Holes on M Diameter Bolt Circle Shaft Diameter MPF-A/B3xx, MPF-A/B4xx, MPF-A/B45xx Power and Feedback Connectors MPF-A/B540 Power and Feedback Connectors Feedback Connector P Power Connector Connector housings can be rotated within a range of 180 Pilot Diameter N Pilot Diameter Tolerances MPF-A/B310, -A/B320, -A/B330 Motors: Ø ( ) MPF-A/B430 Motors: Ø ( ) MPF-A/B4530, -A/B4540 Motors: Ø ( ) MPF-A/B540 Motors: Ø ( ) Shaft-end Threaded Hole MPF-A/B310, -A/B320, -A/B330 Motors: Thread - M5 x 0.8-6H Thread Depth (0.49) MPF-A/B430 Motors: Thread - M6 x 1.0-6H Thread Depth - 16 (0.63) MPF-A/B4530, -A/B4540 Motors: Thread - M8 x H Thread Depth - 19 (0.75) MPF-A/B540 Motors: Thread - M10 x 1.5-6H Thread Depth - 22 (0.87) Detail A Shaft Diameter Tolerances Flush to Pilot ± 0.83 (0.032) MPF-A/B310, -A/B320, -A/B330 Motors: Ø ±0.05 (0.667 ±0.002) MPF-A/B430 Motors: Ø ±0.05 (0.785 ±0.002) MPF-A/B4530, -A/B4540 Motors: Ø ±0.05 (0.982 ±0.002) MPF-A/B540 Motors: Ø 28.0 ±0.05 (1.102 ±0.002) MPF-A/B310, -A/B320, -A/B330 Motors: Ø ( ) MPF-A/B430 Motors: Ø ( ) Shaft Detail with Key GE F MPF-A/B4530, -A/B4540 Motors: Ø ( ) MPF-A/B540 Motors: Ø ( ) MPF-A/B310, -A/B320, -A/B330 = 5 x 5 x 25 Key MPF-A/B430 = 6 x 6 x 25 Key MPF-A/B4530, -A/B4540 = 8 x 7 x 32 Key MPF-A/B540 = 8 x 7 x 40 Key Shaft Seal Refer to page 80 for MP-Series Food Grade motors shaft seal kit information. Shaft, Pilot, and Keyway Tolerances MPF-A/B3xx MPF-A/B4xx MPF-A/B45xx MPF-A/B540 Shaft Runout (T.I.R.) (0.0014) 0.04 (0.0016) 0.04 (0.0016) 0.04 (0.0016) Pilot Eccentricity (T.I.R.) 0.08 (0.0031) 0.08 (0.0031) 0.10 (0.0039) 0.10 (0.0039) Max Face Runout (T.I.R.) 0.08 (0.0031) 0.08 (0.0031) 0.10 (0.0039) 0.10 (0.0039) Keyway Depth (GE) ( ) ( ) ( ) ( ) Keyway Width (F) ( ) ( ) ( ) ( ) 84 Rockwell Automation Publication GMC-TD001F-EN-P - April 2014

8 MPF-A/B3xx, MPF-A/B4xx, MPF-A/B45xx, MPF-A/B5xx Motor Dimensions AB AD HD T LA LD (1) LE (1) L (1) LB (1) L-LB (2) D (3) M S (4) N (3) P GE (3) F (3) MPF-A/B (4.03) 62.0 (2.45) (6.62) (5.04) MPF-A/B (2.60) (3.43) (5.25) 2.74 (0.11) 9.91 (0.39) (5.03) 88.0 (3.45) (7.62) (6.04) 40.0 (1.57) 16.0 (0.629) (3.94) 7.0 (0.283) 80.0 (3.15) (3.64) 3.0 (0.118) 5.0 (0.197) MPF-A/B (6.03) (4.45) (8.62) (7.04) MPF-A/B (2.66) 90.9 (3.58) (5.59) 2.74 (0.11) (0.40) (5.89) (4.31) (8.48) (6.90) 40.0 (1.57) 19.0 (0.748) (4.53) 10.0 (0.401) 95.0 (3.74) (4.02) 3.5 (0.138) 6.0 (0.236) MPF-A/B4530 MPF-A/B (2.66) 98.6 (3.88) (6.20) 2.74 (0.11) (0.48) (6.02) (7.02) (4.44) (5.44) (9.0) (10.0) (7.03) (1.97) (8.03) 24.0 (0.945) (5.12) 10.0 (0.401) (4.33) (4.65) 4.0 (0.158) 8.0 (0.315) MPF-A/B (2.80) (5.37) (8.23) 3.12 (0.12) (0.55) (7.95) (6.38) (11.30) (8.92) 60.0 (2.36) 28.0 (1.102) (6.50) 12.0 (0.481) (5.12) (5.72) 4.0 (0.158) 8.0 (0.315) (1) If ordering an MPF-A/B310, MPF-A/B320, or MPF-A/B330 motor with brake, add 35 mm (1.38 in.) to dimensions L, LB, LD, and LE. If ordering an MPF-A/B430 motor with brake, add 48 mm (1.89 in.) to dimensions L, LB, LD, and LE. If ordering an MPF-A/B4530 or MPF-A/B4540 motor with brake, add 23 mm (0.90 in.) to dimensions L, LB, LD, and LE. If ordering an MPF-A/B540 motor with brake, add 51 mm (2.0 in.) to dimensions L, LB, LD, and LE. (2) Tolerance for this dimension is ±0.7 mm (±0.028 in.). (3) For keyway, shaft diameter, and pilot diameter tolerances, refer to page 84. (4) Tolerance for this dimension is: MPF-A/B3xx, MPF-A/B4xx, or MPF-A/B45xx mm (±0.007 in.) and MPF-A/B5xx mm (±0.008 in.). Motors are designed to metric dimensions. Inch dimensions are approximate conversions from millimeters. Dimensions without tolerances are for reference. ) Rockwell Automation Publication GMC-TD001F-EN-P - April

Kinetix Rotary Motion Specifications

Technical Data Kinetix Rotary Motion Specifications Kinetix VP, MP-Series, Kinetix 6000M, TL-Series, HPK-Series, RDD-Series Topic Page Topic Page Kinetix VP Low Inertia Motors 2 Kinetix 6000M Integrated