HARDWARE & ACCESSORIES

Transcription

1 HARDWARE & ACCESSORIES INTERNATIAL PRODUCT CATALOGUE - MARCH 0 76

2 A C-LINEMICRA C bracket for horizontal suspension and as st element vertical line-array set-up MICRA II / DVS8 A I-LINEMICRA I bracket for vertical line-array set-up MICRA II / DVS8 A FLANGE- Steel mounting bracket with M0 screw and female attachment diam. 36 mm. Fixing of bracket by M6 knob MICRA II / DVS8 / DVS0 A STAND-INCLIN Adaptor for speaker stand with female attachment diam. 36 mm and male attachment h=0 mm diam. 35 mm to hold speaker, with a progressive inclination of 4 through a nylon wheel joint, with security fixing system. To be fixed on speaker stand by M8 knob MICRA II / DVS8 / DVS0 / DVS / DVS5 / Eidos series A EYE NUT M8X5 Flaring male eye-bolt M8x5 for easy suspension of loudspeakers by using built-in flying points DVS0 / DVS / DVS5 / Eidos series INTERNATIAL PRODUCT CATALOGUE - MARCH 0 77

3 A STAFFA-MICRA-V U-bolt for wall ceiling mount MICRA II / DVS8 A STAND-MICRAII Wall mounting speaker bracket with wall plate (0x05x.5 mm with 4 holes diam. 8.5 mm), with M0 thread to fix speaker, arm (70 mm) and swivel joint with fixing knob which allows horizontal and vertical adjustment. Max load: 0 kg MICRA II / DVS8 A STAND- Floor stand with tripod legs, full aluminium tube structure. Height adjustable and lockable by nylon fixing clamp. To facilitate transport of stand the tripod can be fully closed. MICRA II / DVS8 / DVS0 / DVS / DVS5 / EIDOS SERIES A STAND-M0 Telescopic aluminium tube to join two loudspeakers. Height adjustable and lockable by nylon fixing clamp. To be fixed on the subs by pivot M0 thread (DVS5SW / DVS8SW / K-W5A). MICRA II / DVS8 / DVS0 / DVS / DVS5 / EIDOS SERIES A STAND-ADAPT Steel adaptor which allows installing of two speakers on a single loudspeakers stand. Distance between centres of male attachments is 40 mm. Fixing on speaker stand by M8 knob. MICRA II / DVS8 / DVS0 / DVS / EIDOS 0 A ADJ-BRACK0 Wall-ceiling mounting bracket with arms l=330 mm and male lever handle attachments to hold speaker with a desired inclination. The bracket can be fixed to the wall or ceiling using secure anchorage system on the 8 slot holes located on the two wall brackets 50 mm. DVS0 INTERNATIAL PRODUCT CATALOGUE - MARCH 0 78

4 A ADJ-BRACK/5 Wall-ceiling mounting bracket with arms l=385/445 mm, side balancing elements and female lever handle attachments to hold speaker with a desired inclination. The bracket can be fixed to the wall or ceiling using secure anchorage system on the slot holes located on the two wall brackets 50 mm. DVS / DVS 5 A STAND-WALL Adjustable wall mounting bracket with arm l=30 mm and male attachment h=0 mm to hold speaker with a progressive inclination of 4 through a nylon wheel joint, with a security fixing system. The bracket can be fixed to the wall using the 4 holes diam. 0 mm located on the wall plate 00 x 40 mm which allows also the fixing of the security wire. Max load: 40 Kg MICRA II / DVS8 / DVS0 / DVS / DVS5 / EIDOS SERIES A STAND-WALL Adjustable wall mounting bracket tiltable in vertical and in horizontal planes with a progressive inclination of 4 through a nylon wheel joint. Thanks to the rotable steel plate 45x68 mm, distance 50-5 mm, is possible to apply to this bracket loudspeaker with horizontal and vertical fixing system. Wall plate 00x05 mm with 6 holes diam. 8 mm to fix bracket. Max load: 0 Kg IS8 A ADJBH-E0 Horizontal bracket for Eidos 0 A ADJBH-E Horizontal bracket for Eidos A ADJBH-E5 Horizontal bracket for Eidos 5 A ADJBH-V0 Vertical bracket for Eidos 0 A ADJBH-V Vertical bracket for Eidos A ADJBH-V5 Vertical bracket for Eidos 5 AVAILABLE FOR: A TROLLEY I TRIPLA II 5040 / 9075 A TROLLEY II DOPPIA II 5040 / 9075 A TROLLEY IV BOMBER A TROLLEY V DVS 5 SW A TROLLEY VII LAB5 A TROLLEY VIII DVS 8 SW A TROLLEY IX LAB HS A TROLLEY X DBS 8- TROLLEY: 4 wheeled trolley for easy portability and front panel protection INTERNATIAL PRODUCT CATALOGUE - MARCH 0 79

5 AVAILABLE FOR: A SCAP-BOMBER BOMBER A SCAP-DOPPIA DOPPIA II 5040 / 9075 A SCAP-SPECTRA SPECTRA II 5040 / 9075 A SCAP-TRIPLA TRIPLA II 5040 / 9075 A SCAP-DVS5 DVS 5 A SCAP-DVS DVS A SCAP-DVS5SW DVS 5 SW A SCAP-DVS8SW DVS 8 SW A SCAP-MICRA MICRA II A SCAP-DBS 8- DBS 8- / DBS 8- imode A FC-iSM A FC-iSM5 A FC-iSM A RACK0U AVAILABLE FOR: ism ism5 ism GENERIC 0U RACK A CABLA 4 U 9 panel. x CEE 6A mains socket, x XLR signal input connectors and x XLR output connectors - wired in parallel. Amplifier output sockets can be supplied with up to 4 x NL x NL-8 or 8 x NL-4*- please specify when ordering. A SPK 4X A SPK 4X.5-. A SPK 4X.5-0 A SPK 4X4-0 A SPK 4X4-5 A SPK 4X4-5 A SPK 8X.5-. A SPK 8X.5-5 A SPK 8X.5-0 A XLR MIC 035 A XLR MIC 050 A XLR MIC 085 A XLR MIC A XLR MIC A XLR MIC 0 A XLR MIC 0 70 cm. loudspeaker cable (4 poles x.5 mm) with Neutrik Speakon connectors.. mt. loudspeaker cable (4 poles x.5 mm) with Neutrik Speakon connectors. 0 mt. loudspeaker cable (4 poles x.5 mm) with Neutrik Speakon connectors. 0 mt. loudspeaker cable (4 poles x 4 mm) with Neutrik Speakon connectors. 5 mt. loudspeaker cable (4 poles x 4 mm) with Neutrik Speakon connectors. 5 mt. loudspeaker cable (4 poles x 4 mm) with Neutrik Speakon connectors.. mt. loudspeaker cable (8 poles x.5 mm) with Neutrik Speakon connectors. 5 mt. loudspeaker cable (8 poles x.5 mm) with Neutrik Speakon connectors. 0 mt. loudspeaker cable (8 poles x.5 mm) with Neutrik Speakon connectors. 35 cm. balanced XLR Signal/Microphone cable. 50 cm. balanced XLR Signal/Microphone cable. 85 cm. balanced XLR Signal/Microphone cable. mt. balanced XLR Signal/Microphone cable.. mt. balanced XLR Signal/Microphone cable. 0 mt. balanced XLR Signal/Microphone cable. 0 mt. balanced XLR Signal/Microphone cable. On request customized configurations suitable for several system topologies INTERNATIAL PRODUCT CATALOGUE - MARCH 0 80

6 A TRAS400 One-channel ultra-linear 00V constant voltage transformer, x400w/8 Ω for DHD AMPS TYPE D4-3K ( CH). Two-channel ultra-linear 00V constant voltage transformer, x400w/8 Ω for DHD AMPS TYPE D4-3K ( CH). A TRAS800 A TRAS VOX 0 Ultra-linear constant voltage (00/70/50V) transformer, 0 W, two output levels (0/-6dB) Ultra-linear constant voltage (00/70/50V) transformer, 30 W, three output levels (0/-6/- db) Ultra-linear constant voltage (00/70/50V) transformer, 50 W, four output levels (0/-6/-/-8dB) A TRAS VOX 30 A TRAS VOX 50 On request customized configurations suitable for several system topologies Made in European Community CH4 INPUT INPUT CH4 LINK CH3 INPUT CH3 LINK CH3-CH4 BRIDGED OUTPUT AUTO AC MAINS CH-CH BRIDGED OUTPUT CH4 OUTPUT CH3 OUTPUT CH OUTPUT CH INPUT INPUT DHD SERIES 3 3 MAINS: 90/50 VAC RANGE 50/60 Hz CH INPUT CH LINK CAUTI = SHIELD = HOT 3 = COLD TESTED BY DIGITAL HIGH DYNAMIC CH LINK SERIAL No XLR POLARITY RISK OF ELECTRIC SHOCK. DO NOT OPEN. TO REDUCE FIRE OR ELECTRIC SHOCK RISKS, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. CH OUTPUT Made in European Community CH4 INPUT CH4 LINK CH3 INPUT CH4 LINK INPUT AUTO AC MAINS CH3 LINK CH INPUT CH-CH BRIDGED OUTPUT CH3-CH4 BRIDGED OUTPUT 3 MAINS: 90/50 VAC RANGE 50/60 Hz Made in European CommunityCH LINK CH INPUT SERIAL No CAUTI = SHIELD = HOT 3 = COLD CH LINK CH-CH INPUTBRIDGED OUTPUT AUTO AC MAINS XLR POLARITY BRIDGED MODE 3 DHD SERIES CH3-CH4 BRIDGED OUTPUT CH3 INPUT 3 DIGITAL HIGH DYNAMIC CH3 LINK CH4 INPUT INPUT DHD SERIES XLR POLARITY TESTED BY = SHIELD 3 CH4 OUTPUT = HOT CH3 OUTPUT 3 = COLD CH OUTPUT CH OUTPUT Constant voltage transformer to adapt Amp-output to constant voltage line MAINS: 90/50 VAC RANGE 50/60 Hz CH4 OUTPUT CH3 OUTPUT CH OUTPUT Loudspeaker constant voltage transformers to adapt constant voltage line to Loudspeaker input INTERNATIAL PRODUCT CATALOGUE - MARCH 0 8 CH OUTPUT CH LINK CH INPUT CH LINK SERIAL No CAUTI TESTED BY DIGITAL HIGH DYNAMIC CH INPUT INPUT RISK OF ELECTRIC SHOCK. DO NOT OPEN. TO REDUCE FIRE OR ELECTRIC SHOCK RISKS, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK. DO NOT OPEN. TO REDUCE FIRE OR ELECTRIC SHOCK RISKS, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

7 UNIFLY UNIVERSAL MODULAR RIGGING SYSTEM Outline s Unifly is a universal modular flying system for loudspeaker clusters which allows groups of enclosures of any type and brand to be flown to permanent or mobile structures. The Unifly system, with all its components and accessories, has been tested with load and breaking tests and is supplied with the relative certificates and reports. The main component of the Unifly system is a steel bar with a rectangular cross-section, available in two lengths, at both end of which there are two bushes, whose positions are inverted in relation to each other, enabling several modules to be linked. The bars are joined by a kit supplied as standard with each bar. Truss end kit must be used to close one end of a bar. The Unifly 55 bar is also equipped with a central hole in which a third pin can be mounted and used either as a third upper flying point, or as a bottom flying point for the enclosures (for example the rear one to incline them on the vertical plane). Precise adjustment of the angle between two bars is very easy and extremely precise, with the goniometer printed on each bush and an exclusive ball movement system which divides movement into inclination steps of 7.5. Accessories supplied as standard with each module enable it to be linked to the next one. A UF-SM A UF-EN0 A UF-S A UF-7/55 A UF-P ANGLE ADJUSTMENT INTERNATIAL PRODUCT CATALOGUE - MARCH 0 8

8 A UF-7 Unifly bar with centre to centre 7 cm. Wheel-base module. For joining to another Unifly 7 or Unifly 55, the UF-P set must be used. Weight (Kg.): Dimensions: 300x50x00 mm (WxDxH). A UF-55 Unifly bar with centre to centre 55 cm. Wheel-base module. For joining to another Unifly 55 or Unifly 7, the UF-P set must be used. The UF-55 has a hole in its center to optionally place a UF-P set to get a further hanging point. Weight (Kg.): Dimensions: 600x50x00 mm (WxDxH). A UF-S To be used at each end of the Unifly bar, while not closed (i.e. rectangular structures). A UF-p will be used for each UF-S. Weight (Kg.):.3 - Dimensions: 50x8x39,5 mm (WxDxH). A UF-P Connecting bolt comprising: Outline V338 steel pin, 3 M0 h 6 mm nuts, mm diam. (int.) 5mm thick spring washers, mm diam. (int.) 3.5 mm. thick washer. If used at the end of a Unifly bar must be used with UF-S termination bush (see above). Weight (Kg.):. A UF-EN0 C Female eye-bolt M0 (DIN 58). Used to terminate the upper part of the Outline V338 pin and thus have a direct flying point whether the Shackle Mount accessory is not available. Weight (Kg.): Dimensions: 74x7x40 mm (WxDxH). A UF-SM Sliding Outline hook. Fitted at the centre of a bar made up of several Unifly modules. Gives a sliding flying point for easily finding the Cluster s centre of gravity. Weight (Kg.):.3 - Dimensions: 63x40x0 mm (WxDxH). INTERNATIAL PRODUCT CATALOGUE - MARCH 0 83

9 A UF-SC Carabiner with spring closure and screw lock. Weight (kg): Dimensions: 56x0x0 mm (WxDxH). A UF-QSH / A UF-QSH70 Outline quick hinge with M0 35x67mm straight shackle. Allows to join two Outline enclosures using the Outline Fast Hanger hanging system to get a common flying point. Weight (kg): Dimensions (with shackle): 50x56x9 mm (WxDxH). A UF-QH / A UF-QH70 For the quick joint between two loudspeakers that use Outline s Fast Hanger hanging system. Weight (kg): Dimensions: 50x8x39.5 mm (WxDxH). A UF-QSH A UF-SC A UF-QH INTERNATIAL PRODUCT CATALOGUE - MARCH 0 84

10 A UF-QSL Used on the side hanging points of Outline loudspeakers enables to apply an angle of 5 for each mounted steel link. Weight (kg): Dimensions: 30x7x66 mm (wxdxh). A UF-QSL Used on the side hanging points of Outline loudspeakers enables to apply an angle of 5 for each mounted steel link. Weight (kg): Dimensions: 30x7x66 mm (wxdxh). A UF-QSL A UF-APL A UF-APL-A For vertical alignment of modules to preset degrees. Combined with ratchetstrap. With upward thread to ease fitting of kelping system. Weight (kg): Dimensions: 50x8x39.5 mm. (wxdxh). A UF-APL-B For vertical alignment of modules to preset degrees. Combined with ratchetstrap. The same as A type but with opposite face thread. Weight (kg): Dimensions: 50x8x39.5 mm. (wxdxh). INTERNATIAL PRODUCT CATALOGUE - MARCH 0 85