Specifications & Parts Model 2.0/15 Crane

Size: px
Start display at page:

Download "Specifications & Parts Model 2.0/15 Crane"

Transcription

1 2.0/15T: : PARTS-1 Specifications & Parts Model 2.0/15 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA TECHNICAL SUPPORT FAX: MANUAL PART NUMBER: Iowa Mold Tooling Co., Inc. is an Oshkosh Corporation company.

2 2.0/15T: : PARTS-2 TABLE OF CONTENTS REVISIONS LIST... 3 INTRODUCTION... 4 BASE & MAST... 5 M-BASE INCLUDING CRANE MAST... 6 STABILIZER BEAM, TYPE SR... 7 STABILIZER BEAM, TYPE SR... 8 STABILIZER BEAM & SAFETYLOCK, TYPE SR HYDRAULIC STABILIZER LEG MECHANICAL STABILIZER LEG HYDRAULIC STABILIZER LEGS JIB EXTENSIONS, T JIB EXTENSIONS, T BOOM CYLINDER C JIB CYLINDER C EXTENSION CYLINDER, C T2+K EXTENSION CYLINDER C40-100, T2 + K STABILIZER CYLINDER, C CONTROL VALVE, SDM081/ CONTROL VALVE, SDM081/ VALVE BRACKET SDM-081/ VALVE BRACKET SDM-081/ VALVE BRACKET SDM-081/ HYDRAULIC SYSTEM, SLEWING SYSTEM HYDRAULIC SYSTEM, SLEWING SYSTEM-M HYDRAULIC SYSTEM, BOOM CYL C70-68 T/T HYDRAULIC SYSTEM, EXT CYLINDER, C T POWER PACK, T/T ELECTRICAL & HYRAULIC PARTS FEED & RETURN PIPES FOR PTO PUMP & MOTOR, 3KW, M-BASE DC SUPPLY 12V + 24V / 3KW MOUNTING FITTINGS MOUNTING FITTINGS, M-BASE JIB EXTENSION LMB LOAD-MOMENT INDICATOR LOAD-MOMENT INDICATOR, T SERIES RCI RCI RCL WINCH WITH PULLEY & HOOK SAFETY SYSTEM FOR ELECTRIC WINCH, T /15T DECAL KIT ( )... 45

3 2.0/15T: : PARTS-3 REVISIONS LIST DATE LOCATION DESCRIPTION OF CHANGE THROUGHOUT NEW RELEASE ,45 ECN UPDATED STABILIZER WORDING In addition to the information presented in this manual, read and understand the IMT Material Handling Crane Operation & Safety Manual before operating or performing any maintenance on your crane.

4 2.0/15T: : GENERAL This manual contains the parts drawings with accompanying parts lists for the assemblies used on this crane. These drawings are intended to be used in conjunction with the instructions found in the Instruction Manual. PARTS-4 INTRODUCTION ORDERING REPAIR PARTS When ordering replacement parts: 1. Give the model number of the unit. 2. Give the serial number of the unit. WARNING DO NOT ATTEMPT TO REPAIR ANY COMPONENT WITHOUT READING THE INFORMATION CONTAINED IN THE INSTRUCTION MANUAL. PAY PARTICULAR ATTENTION TO THE WARNINGS, CAUTIONS AND NOTES CONTAINED IN THAT MANUAL. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN DAMAGE TO THE EQUIPMENT, AN INJURY OR EVEN DEATH. CRANE IDENTIFICATION Every crane has a serial number placard attached to the mast. When ordering parts, communicating warranty information or referring to the unit in correspondence, always include the assigned serial number and model number as shown on the serial number placard. 3. Specify the complete part number. When ordering complete cylinders or assemblies, identify the cylinder or assembly by name. 4. Give a complete description of the part. 5. Specify the quantity required. All inquiries should be addressed to: Iowa Mold Tooling Co., Inc. Box 189, Garner, IA Telephone: Technical Support Fax: IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA MODEL NUMBER SERIAL NUMBER MFG DATE SERIAL NUMBER PLACARD 1. Base 2. Slewing (rotation) cylinder 3. Mechanical stabilizer leg 4. Stabilizer beam 5. Crane column (mast) 6. Boom cylinder 7. Hinge pin 8. Boom 9. Extension cylinder 10. Extension, 120 mm 11. Extension, 100 mm 12. Hook 13. Control valve 14. Mounting bolt with fittings COMPONENT REFERENCE

5 2.0/15T: : BASE & MAST SEAL KIT (INCL 21,22) CRANE MAST, COMPLETE BUSHING RETAINING PIN, Ø6 X PIN THRUST BEARING UPPER BEARING LOWER BEARING AIR FILTER COUNTERSUNK SCREW MK6X SPACER LUBRICATOR M6X1-0 1 PARTS PLUG PIPE PLUG P 1/4" BASE PIPE PLUG P 1/2" CYLINDER SCREW MC10X O-RING SEAL PISTON SLIDE BLOCK RACK PLUG 1

6 2.0/15T: : M-BASE INCLUDING CRANE MAST SEAL KIT CRANE MAST, COMPLETE BUSHING RETAINING PIN, Ø6 X PIN THRUST BEARING UPPER BEARING LOWER BEARING AIR FILTER LUBRICATOR M6X RACK SLIDE BLOCK PISTON SEAL 70X58X O-RING X CYLINDER SCREW MC10X COVER BASE PLUG 1 PARTS-6

7 2.0/15T: : STABILIZER BEAM, TYPE SR SNAP RING 65U FLANGE LUBRICATOR M6X BOLT STABILIZER EXTENSION 1 PARTS-7

8 2.0/15T: : STABILIZER BEAM, TYPE SR STABILIZER EXTENSION SNAP LOCK, BLACK LUBRICATOR M6X CIRCLIP 65U LOCK PIN 1 PARTS

9 2.0/15T: : STABILIZER BEAM & SAFETYLOCK, TYPE SR STABILIZER EXTENSION SNAP LOCK, BLACK LUBRICATOR, M6 X CIRCLIP, 65U STAB. SAFETY LOCK 1 WITH SENSOR FITTING STABILIZER SAFETY LOCK PROXIMITY SWITCH FOR STABILIZER PARTS

10 2.0/15T: : HYDRAULIC STABILIZER LEG LOCK PIN WASHER SNAP RING 60U PIPE POINTED SCREW MSP6X SCREW MC10X LOCK RING BANJO CONNECTION PIP CONNECTION PILOTED CHECK VALVE CONNECTION CONNECTION CONNECTION HOSE 1/4" X 1800 O/O 2 PARTS-10

11 2.0/15T: : MECHANICAL STABILIZER LEG STABILIZER, MECH, COMPLETE 1 (INCL 6-19) WASHER LOCK PIN MOUNTING PLATE SCREW MK10X SCREW MC10X FRONT TUBE LUBRICATOR M6X PIPE 1 PARTS BOLT WASHER SCREW MC6X SPRING SPIKE BACK TUBE FOOT PLATE SET SCREW M8X LOCK NUT M SCREW MSP16X COUNTER NUT M16 1

12 2.0/15T: : HYDRAULIC STABILIZER LEGS LOCK PIN WASHER SNAP RING 60U PIPE POINTED SCREW MSP6X SCREW MC10X LOCK RING BANJO CONNECTION PIPE CONNECTION PILOTED CHECK-VALVE CONNECTION CONNECTION CONNECTION HOSE 1/4" X 1800 O/O HOSE 1/4" X CLAMP, DOUBLE 2X12MM 2 PARTS-12

13 2.0/15T: : JIB EXTENSIONS, T MAIN BOOM SLIDE BLOCK SPACER SLIDE BLOCK BOLT RETAINING PIN, Ø6 X LUBRICATOR, M6X LOCK NUT M BOLT LOCK NUT M SCREW MC8X LOCK PIN WITH CHAIN (INCL 13) 1 PARTS SPLIT RING Ø SCREW MK6X JIB EXTENSION 120MM COUNTERSUNK SCREW, MK6X SPACER SLIDE BLOCK SLIDE BLOCK LOCK PIN WITH CHAIN JIB EXTENSION 100MM SLIDE BLOCK SHACKLE SWIVEL HOOK SAFETY CATCH

14 2.0/15T: : JIB EXTENSIONS, T2 (FROM S/N ON) GUIDE MAIN BOOM SLIDE BLOCK SPACER SCREW MK6X SLIDE BLOCK BOLT RETAINING PIN Ø6 X SOCKETHEAD SCREW MC10X SCREW MC8X LUBRICATOR M6X LOCK NUT M30 1 PARTS BOLT LOCK NUT M SCREW MC6X LOCK NUT M JIB EXTENSION 120MM SPACER SLIDE BLOCK COUNTERSUNK SCREW MK6X SLIDE BLOCK JIB EXTENSION 100MM SLIDE BLOCK SHACKLE SAFETY CATCH SWIVEL HOOK 1

15 2.0/15T: : BOOM CYLINDER C BOOM CYLINDER C SEAL KIT (INCL 2-7) CYLINDER O-RING 19.2X O-RING 32.1X SEAL 70X58X SEAL 40X50X O-RING 64.5X SCRAPER 1 PARTS PLUG RUBBER PLUG PISTON BUSHING LUBRICATOR M6X PISTON PISTON ROD LUBRICATOR M6X GUIDE 1

16 2.0/15T: : JIB CYLINDER C JIB CYLINDER C SEAL KIT (INCL 6-9) CYLINDER RUBBER PLUG BUSHING LUBRICATOR M6X PISTON SEAL 70X58X SEAL 40X50X O-RING 64.5X SCRAPER GUIDE PISTON ROD LUBRICATOR M6X1 1 PARTS-16

17 2.0/15T: : EXTENSION CYLINDER, C T2+K EXTENSION CYLINDER SEAL KIT (INCL 10-14) CYLINDER ELBOW CONNECTION T-CONNECTION NUT SOCKETHEAD PIN Ø5 X END PLATE NYLON BUSHING END PLATE PISTON DOUBLE SLEEVE 40X30X O-RING 19.2X BACK RING 25X O-RING 36.2X SCRAPER GUIDE PISTON ROD 2 PARTS-17

18 2.0/15T: : EXTENSION CYLINDER C40-100, T2 + K EXTENSION CYLINDER C SEAL KIT (INCL ) CYLINDER TUBE ELBOW CONNECTION T-CONNECTION NUT SOCKETHEAD PIN END PLATE NYLON BUSHING END PLATE 1 PARTS PISTON DOUBLE ACTING SEAL O-RING OR 24,2 X BACK RING STR 25 X 30 X 1, O-RING OR 36,2 X SCRAPER GA 25 X 35 X 7/ GUIDE PISTON ROD BLANKING PLUG + O-RING

19 2.0/15T: : STABILIZER CYLINDER, C STABLIZER CYLINDER C SEAL KIT (INCL 3-10) CYLINDER PISTON DOUBLE SLEEVE, 50X38X O-RING 44.2 X BACK RING 45X SEAL Ø O-RING O-RING 34.2 X BACK RING 34.2X SCRAPER 34X45X7/ GUIDE PISTON ROD LOCK NUT M FOOT PLATE STEEL BOLT M10X65 1 PARTS INCLUDES PILOTED CHECK-VALVE, PIPE AND CONNECTIONS

20 2.0/15T: : CONTROL VALVE, SDM081/6 (EFF. S/N ) CONTROL VALVE & 1 MICROSWITCH CONTROL VALVE 1 1. DUMP VALVE, 12V 1 2. DUMP VALVE, 26V CARTRIDGE SOLENOID, 12V SOLENOID, 26V SERIES NIPPLE MICROSWITCH 1 PARTS GB: Part no. GB: Revision 7 GB: With regard to other spare parts please see drawing no

21 2.0/15T: : CONTROL VALVE, SDM081/3 (EFF. S/N ) CONTROL VALVE CONTROL VLV + MICROSWITCH 1 (INCL 8MS3 KIT) 1. DUMP VALVE, 12V 1 2. DUMP VALVE, 26V CARTRIDGE SOLENOID, 12V SOLENOID, 26V SERIES NIPPLE MICROSWITCH 1 PARTS GB: Part no. GB: Revision GB: With regard to other spare parts please see drawing no

22 2.0/15T: : VALVE BRACKET SDM-081/ VALVE BRACKET SAFETY GUARD NUT, STAINLESS M LOCK NUT, STAINLESS M WASHER, STAINLESS 8 MM BRACKET FOR RCI SET SCREW, SS M6X FACE WASHER, SS 6 MM LOCK NUT, STAINLESS M CONTROL LEVER, LONG, BEND KNOB FOR LEVER SET SCREW, SS M8 X 16 2 PARTS

23 2.0/15T: : VALVE BRACKET SDM-081/ PROTECTIVE PLATE, CTRL VLV VALVE BRACKET BRACKET, RCL BRACKET, PRESS GAUGE & 1 STOP BUTTON CLIP M6.5-4 MM BUTTON HEAD SCREW M6X WASHER SS 6MM SET SCREW SS M6X SET SCREW SS M8X WASHER 8.4 X 18 X CONTROL LEVER KNOB FOR LEVER NUT SS M8 3 PARTS

24 2.0/15T: : VALVE BRACKET SDM-081/ VALVE BRACKET SAFETY GUARD WASHER, SS 8MM NUT, SS M LOCK NUT, SS M BRACKET FOR RCI SET SCREW, SS M6X FACE WASHER, SS 6MM LOCK NUT, SS M CONTROL LEVER, LONG, CONTROL LEVER, SHORT KNOB FOR LEVER SET SCREW, SS M8 X 16 2 PARTS

25 2.0/15T: : HYDRAULIC SYSTEM, SLEWING SYSTEM CONNECTION HOSE 1/4" X 1330 O/IO CONNECTION PIPE VALVE HOUSING PORT-RELIEF VALVE 125BAR CONNECTION PIPE O-RING 13.3 X SEAL KIT 1 PARTS-25

26 2.0/15T: : HYDRAULIC SYSTEM, SLEWING SYSTEM-M CONNECTION HOSE 1/4" X 1330 O/O PORT-RELIEF VALVE 125 BAR O-RING 13.3 X SEAL KIT CONNECTION PIPE CONNECTION VALVE HOUSING CONNECTION 2 PARTS-26

27 2.0/15T: : HYDRAULIC SYSTEM, BOOM CYL C70-68 T/T CONNECTION HOSE 1/4" X 2000 O/O CLAMP, DOUBLE 2 X 12MM STEEL BOLT M6X CONNECTION PIPE CONNECTION COUPLING NUT M8L BLANKING PLUG CONNECTION PIPE CONNECTION LOAD-HOLDING VALVE 1 PARTS-27

28 2.0/15T: : HYDRAULIC SYSTEM, EXT CYLINDER, C T CLIP PLATE ELBOW CONNECTION PIPE PIPE CONNECTION PILOTED CHECK-VALVE T-CONNECTION CONNECTION PIPE PIPE T-CONNECTION STEL BOLT M6X CONNECTION CONNECTION HOSE CONNECTION PIPE 1 PARTS-28

29 2.0/15T: : POWER PACK, T/T2 (FROM S/N ON) POWER PACK, CPL 24V POWER PACK, CPL 12V PUMP SEAL KIT ENGINE, 12V 3KW ENGINE, 24V 3KW CLIP CABLE FUSE HOLDER CABLE SCREW MOUNTING PLATE NUT M STARTING RELAY, 12V STARING RELAY, 24V THERMO RELAY 90 DEG CARBOR FOR MOTOR, 12V CARBOR FOR MOTOR, 24V LOCK NUT M LOCK NUT M SUSPENSION SET SCREW M8X GROUNDING CABLE 12V PLATE TORSION BALANCER GUIDE SCREW M3X8 1 PARTS-29

30 2.0/15T: : ELECTRICAL & HYRAULIC PARTS CONNECTION HOSE 1/4" X 1800 O/O HOSE 1/4" X 950 O/O MICROSWITCH (INCL 5-9) SCREW M3X GUIDE ROLLER BRACKET SPRING WASHER 3MM NUT M WASHER 4MM SPRING WASHER 4MM SCREW MC4X SOCKET, MALE SOCKET, FEMALE CLIP CABLE ELBOW CONNECTION 1 PARTS REDUCING CONNECTION O-RING X CONNECTION FLANGE CONNECTION RETURN FILTER LUBRICATOR PIPE 1/2" X CLIP HS SYN RUBBER HOSE 3/4" X ELBOW SWITCH BULB 12V 1.2W BULB 24V 1.2W MICROSWITCH, COMPLETE MICROSWITCH, COMPLETE MICROSWITCH, COMPLETE MICROSWITCH, COMPLETE

31 2.0/15T: : FEED & RETURN PIPES FOR PTO CONNECTION HOSE 1/4" X 1800 O/O HOSE 1/4" X 950 O/O FLANGE CONNECTION RETURN FILTER O-RING X CONNECTION LUBRICATOR PIPE 1/2" X CLIP HS SYN RUBBER HOSE, 3/4" X 1.5M CONNECTION 1 PARTS-31

32 2.0/15T: : PUMP & MOTOR, 3KW, M-BASE POWER PACK, CPL 12V-3KW POWER PACK, CPL 24V-3KW TANK PACKING GLAND LEAD-IN PACKING GLAND SUCTION FILTER O-RING 24.2 X CONNECTION PLUG WITH MAGNET 1/2" ECCENTRIC LOCK SS OIL LEVEL ROD CONNECTION COVER CONNECTION CONNECTION CONNECTION PIPE 2KW CONNECTION PIPE 3KW RED CONNECTION ELBOW CONNECTION HOSE 1/4" X 2200 O/O GROUNDING CABLE, 12V CABLE 1 PARTS ENGINE 12V 3KW ENGINE 24V 3KW THERMO RELAY, 90 DEG PUMP SEAL KIT CLIP HS SYN RUBBER HOSE ELBOW SCREW NUT M MOUNTING PLATE STARTING RELAY, 12V STARTING RELAY, 24V CABLE FUSE HOLDER CABLE NUT M SPRING WASHER 6MM SET SCREW M6X SUSPENSION CLIP 3KW GUIDE 2KW GUIDE 3KW SCREW M3X CARBON FOR MOTOR, 12V 3KW CARBON FOR MOTOR, 24V 3KW

33 2.0/15T: : DC SUPPLY 12V + 24V / 3KW DC POWER PACK 12 V DC POWER PACK, 24 V POWER PACK, 12 V DC POWER PACK, 24 V DC PIPE PIPE ENGINE ENGINE PUMP PUMP RELAY RELAY MOTOR/PUMP PARTS MOTOR/PUMP ELBOW STRAIGHT CONNECTION ELBOW CONNECTION WV 10L SCREW VSK 10L PROFILE RING R 10 L/S COUPLING NUT M10L HOSE HOSE HOSE HOSE PROTECTIVE COVER PROTECTIVE COVER PROTECTIVE COVER

34 2.0/15T: : MOUNTING FITTINGS MOUNTING FITTINGS STEEL BOLT LOADER FITTINGS CHASSIS FITTINGS LOCK NUT M20 4 PARTS-34

35 2.0/15T: : MOUNTING FITTINGS, M-BASE MOUNTING FITTINGS STEEL BOLT WASHER SPACER LOCK NUT M16 8 PARTS-35

36 2.0/15T: : JIB EXTENSION MANUAL EXTENSION, CPL 80 M SOCKETHEAD SCREW, MC8X LOCK PLATE SHACKLE SWVL 2T 1/2" PIN RING SPLIT Ø MAN. EXTENSION, CPL 62MM K PIN PARTS-36

37 2.0/15T: : LMB (FROM S/N TO ) LMB, COMPLETE 24V LMB, COMPLETE 12V CONNECTION PIPE CONNECTION HOSE-FAILURE VALVE 8L CONNECTION HOSE 1/4" X 1800 O/O BULKHEAD CONNECTION WASHER 28X15X SEAL WASHER CONNECTION PRESSURE SWITCH 1 PARTS CONNECTION HOSE 1/4" X 350 O/O VALVE HOUSING CONNECTION PLUG CARTRIDGE SOLENOID 12V SOLENOID 24V COVER LABEL PRESSURE SWITCH TERMINAL CONTROL BOX SEALING RING Ø20X25X CABLE LEAD-IN PG CABLE 2 X SWITCH BULB 12V 1.2W BULB 24V 1.2W FUSE HOLDER FUSE 8AMP

38 2.0/15T: : LOAD-MOMENT INDICATOR MOUNTING KIT (INCL 1-9) CONNECTION PIPE CONNECTION HOSE-FAILURE VALVE 8L CONNECTION HOSE 1/4" X 2000 O/O PRESSURE GAUGE PRESS GAUGE LABEL HOUSING 1 PARTS-38

39 2.0/15T: : LOAD-MOMENT INDICATOR, T SERIES PIPE CONNECTION CONNECTION CONNECTION PRESSURE GAUGE HOSE PRESS GAUGE LABEL HOSE-FAILURE VALVE 1 3 PARTS

40 2.0/15T: : RCI SWITCH LOCK NUT M LOCK NUT M FITTINGS CONTROLLER CONTROLLER CABLE LEAD-IN PG PLUG PG PLUG PG BUZZER FUSE 2AMP SWITCH CONNECTION E-STOP (INCL 12,13) CABLE 2 X CABLE 3 X CLIP PLUG PRESS TRANSDUCER BAR CONNECTION HOSE 1/4" X 350 O/O CONNECTION VALVE HOUSING CONNECTION CONNECTION PLUG CARTRIDGE SOLENOID 12V SOLENOID 24V PLUG STEEL BOLT M6X PROTECTIVE PLATE BLANKING PLUG COUPLING NUT M8L CONNECTION SEAL WASHER Ø14X18.7X FRONT, COMPLETE RCI CLIP CABLE CONNECTION SEAL WASHER Ø14.7X22X PRESSURE SWITCH RUBBER COVER MAGNET COIL 12V SOLENOID 26V CARTRIDGE 1 PARTS-40 DRAWING ON NEXT PAGE

41 2.0/15T: RCI5100 PARTS-41 PARTS LIST ON PREVIOUS PAGE

42 2.0/15T: : RCL FRONT COMPLETE, RCL BOTTOM FROM RCL-BOX 1 INCLUDING HINGE SCREW, SS 6,0 X SCREW, SS 4,0 X SCREW, SS 4,0 X CABLE LEAD-IN CABLE 4 X ,3 MTR CABLE CABLE 4 X ,1 MTR CABLE SHOE CABLE, DUMP VALVE CABLE WITH SOCKET, 5 M 1 PARTS RUBBER COVER CLAMP PLUG, 3-POLAR FOR RCL PIN CAN TERMINATION PLUG, 8-POLAR FOR RCL PLUG, 9-POLAR FOR RCL PRESSURE SWITCH SEAL WASHER Ø14,7 X 22 X 1, PRESS GAUGE CONNECTION CONNECTION PRESSURE TRANSDUCER

43 2.0/15T: : WINCH WITH PULLEY & HOOK PULLEY, COMPLETE SPACER PIN WIRE SHEAVE SNATCH BLOCK LUBRICATOR M6X SNAP RING 35U RETAINING PIN Ø5 X PIN STOP SWIVEL HOOK, CPL RIVET LABEL, SWIVEL 0.9 T PIPE PARTS WEIGHT STEEL BOLT M16X LOCK NUT M SHACKLE SWL 2T 1/2" HOOK SWL 2T SAFETY CATCH BRACKET WIRE ROPE Ø7 X 16M WINCH, 12V JIB EXTENSION PIN PIN CYLINDER STOP REMOTE CONTROL REMOTE CONTROL SCREW MC4X6 2

44 2.0/15T: : SAFETY SYSTEM FOR ELECTRIC WINCH, T CONNECTION HOSE 3/8" X 1330 O/O CABLE WITH PLUG INDUCTIVE SENSOR CTRL POWER CABLE, 1.5 X 5M RELAY 12V AUX. RELAY BOX CONNECTION PG CABLE 2 X 1.5 X 4.5M CABLE X 0.5 M 1 PARTS WIRE STOP O-RING MAGNET COIL, 12V PLUG MAGNET COIL SEAL KIT VALVE HOUSING PLUG CONNECTION CONNECTION CONNECTION SCREW M6X10 2

45 2.0/15T: : PARTS /15T DECAL KIT ( ) PART # DESCRIPTION QTY PLACEMENT (IF NOT SHOWN) DECAL-CRANE SAFETY & OPER DECAL, CP 2.0/15T DECAL, ID 2.0/15T DECAL, CONTROL SS 1 SHIP LOOSE DECAL, CONTROL CS 1 SHIP LOOSE DECAL, MADE IN DENMARK 1 SHIP LOOSE DECAL-GREASE WEEKLY (L) 3 INSTALL AT GREASE ZERKS DECAL-GREASE WEEKLY (R) 3 INSTALL AT GREASE ZERKS DECAL-WARN STAB STD CLR DECAL-WARN CR LOAD (TRK) 4 SHIP LOOSE. INSTALL ON ALL 4 SIDES OF VEHICLE DECAL-DANGER ELEC HZD LG 4 SHIP LOOSE. INSTALL ON ALL 4 SIDES OF VEHICLE DECAL-SERVICE & REPAIR 1 2 (BOTH SIDES) 3 (BOTH SIDES) 1 9 (BOTH STABILIZERS)

46 2.0/15T: PARTS-46 IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA TECHNICAL SUPPORT FAX:

Repair Parts Model 4/29 Crane

Repair Parts Model 4/29 Crane 4/29: 99903041: 20111201 PARTS-1 Repair Parts Model 4/29 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 TECHNICAL SUPPORT FAX: 641-923-2424 MANUAL PART NUMBER: 99903041 Iowa

More information

Repair Parts Model 0.5/4 Crane

Repair Parts Model 0.5/4 Crane MODEL 0.5/4 : 99903420: 20111129 PAGE - 1 MATERIAL HANDLING SYSTEMS Repair Parts Model 0.5/4 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NO: 99903420 Iowa

More information

Repair Parts Model 14/103 Crane

Repair Parts Model 14/103 Crane 14/103: 99903051: 20140911 PARTS-1 Repair Parts Model 14/103 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 TECHNICAL SUPPORT FAX: 641-923-2424 MANUAL PART NUMBER: 99903051

More information

Repair Parts Model 7/48 Crane

Repair Parts Model 7/48 Crane 7/48: 99904681: 20111213 PARTS-1 Repair Parts Model 7/48 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NUMBER: 99904681 Iowa Mold Tooling Co., Inc. is an Oshkosh

More information

Repair Parts Model 34/235 Crane Model 37/266 Crane

Repair Parts Model 34/235 Crane Model 37/266 Crane 34/235&37/266: 99903242: 20120305 PARTS-1 Repair Parts Model 34/235 Crane Model 37/266 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 TECHNICAL SUPPORT FAX: 641-923-2424

More information

Repair Parts Model 15/113 Crane

Repair Parts Model 15/113 Crane 15/113: 99903211: 20120223 PARTS-1 Repair Parts Model 15/113 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NUMBER: 99903211 Iowa Mold Tooling Co., Inc. is an

More information

Repair Parts Model 12/89 Crane

Repair Parts Model 12/89 Crane 99909: 00706 PARTS- Repair Parts Model /89 Crane IOWA MOLD TOOLING CO., INC. BOX 89, GARNER, IA 508-089 6-9-7 MANUAL PART NUMBER: 99909 Iowa Mold Tooling Co., Inc. is an Oshkosh Truck Corporation company.

More information

Serial Number Range. Jib-Hoist. from SN Part No

Serial Number Range. Jib-Hoist. from SN Part No Serial Number Range Jib-Hoist from SN 56306 Part No. 645045 Rev B May 2010 2 Jib-Hoist Part No. 645045 How to Read Your Serial Number Part No. 645045 Jib-Hoist 3 Table of Contents This manual is updated

More information

MATERIAL HANDLING SYSTEMS INSTALLATION GUIDE CRANE MODELS: 0.5/4 1.5/10 2.0/15T 2.6/19T

MATERIAL HANDLING SYSTEMS INSTALLATION GUIDE CRANE MODELS: 0.5/4 1.5/10 2.0/15T 2.6/19T INSTALL-MINI : 99903431: 20120920 PAGE - 1 MATERIAL HANDLING SYSTEMS INSTALLATION GUIDE CRANE MODELS: 0.5/4 1.5/10 2.0/15T 2.6/19T IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711

More information

We recommend that when you need spare parts, you should use only original parts.

We recommend that when you need spare parts, you should use only original parts. Tanco Auto wrap 1300 SPARE PARTS LIST We recommend that when you need spare parts, you should use only original parts. When ordering spare Parts use the following: - Drawings are marked with a position

More information

COVER PLATES & ROLLERS

COVER PLATES & ROLLERS COVER PLATES & ROLLERS 9035-10 Revised 8/95 FOR MODELS - ALL 3/98 Item Part Number Part Description Qty. 1 9035--1--10 Top Cover Plate 1 2 62--425 3/8NC x 3/4 Hex Washer Thread Cutting Screw 8 3 62--544

More information

INSTALLATION AND REPAIR MANUAL 4000 LB WINCH

INSTALLATION AND REPAIR MANUAL 4000 LB WINCH 4000#WIDE: 99900408: 20111213 1 INSTALLATION AND REPAIR MANUAL 4000 LB WINCH CRANES USED ON: 1080 1080A 6425 7200 SERIES 8025 8031 9000 SERIES IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189

More information

Spearhead Excel 565, 605 & 645T

Spearhead Excel 565, 605 & 645T 1 Spearhead Twiga 5000, 6000, 6000LR & 6000 T Parts Book 11 th Edition February 2010 Green-Tec A/S Merkurvej 25 DK 6000 Kolding Tel: +45 7555 3644 Fax: +45 7555 4243 www.greentec.eu info@greentec.eu Spearhead

More information

MATERIAL HANDLING SYSTEMS CRANE SPECIFICATIONS & OPERATION MANUAL

MATERIAL HANDLING SYSTEMS CRANE SPECIFICATIONS & OPERATION MANUAL OPERATION : 99903422: 20120920 PAGE - 1 MATERIAL HANDLING SYSTEMS CRANE SPECIFICATIONS & OPERATION MANUAL MODELS 0.5/4, 1.5/10, 2.0/15T, 2.6/19T IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189

More information

8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST

8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST 8 LIFT ASSEMBLY 8.1 LIFT ASSEMBLY PARTS LIST 24 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY. DESCRIPTION PART # 1 24 FLAT WASHER, 1/2 ID SAE 6-0248 2 16 LOCKWASHER, 1/2 ID 6-0059 3 17 HEX NUT, 1/2-13UNC 6-0035

More information

Spearhead TWIGA. TWIGA Reach Mower 545 / 595 / 640T. Edition 1.1 April 2014 Part No

Spearhead TWIGA. TWIGA Reach Mower 545 / 595 / 640T. Edition 1.1 April 2014 Part No TWIGA Reach Mower 545 / 595 / 640T Edition 1.1 April 2014 Part No. 8999016 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 Tank Lid 8 Rear Panel 10 Slew Post 12 Lift Frame 14 Main Arm 16 Dipper Arm 18

More information

HR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount.

HR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount. HRTS Rotary Rake Serial Numbers 00 and higher Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Page 0 Tongue Front Frame Guards

More information

Spearhead TWIGA 320/420. TWIGA Reach Mower 320/420. Edition 1.5 February 2015 Part No

Spearhead TWIGA 320/420. TWIGA Reach Mower 320/420. Edition 1.5 February 2015 Part No Spearhead TWIGA 320/420 TWIGA Reach Mower 320/420 Edition 1.5 February 2015 Part No. 8999060 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 540/1000 RPM Hydraulic Drive 8 Electric Rotor Valve Assembly

More information

Illustrated Parts List

Illustrated Parts List Illustrated Parts List. Ordering Parts For your convenience, replacement parts and accessories can be ordered from ARPAC by fax 24 hours a day. Please have the following information available to ensure

More information

COVER PLATES & ROLLERS

COVER PLATES & ROLLERS COVER PLATES & ROLLERS FOR MODELS - ALL 8/01 Item PartNumber Part Description Qty. 1 9017--104--35 Stop 2 2 62--108 3/8NC x 1 GD5 Cap Screw 2 3 62--425 3/8NC x 3/4 GD8 Hex Washer Thread Forming Screw 8

More information

SWINGTRIM Swingover Cutterbar Trimmer

SWINGTRIM Swingover Cutterbar Trimmer Publication 117(PM) December 2007 Part No. 1090850 Revision: 2 SWINGTRIM Swingover Cutterbar Trimmer Parts Manual For best performance USE ONLY McCONNEL SERVICE PARTS To be assured of the latest design

More information

Spearhead TWIGA. TWIGA Reach Mower 555/600/655T/700T 555FR/600FR. Edition 2.5 June 2014 Part No

Spearhead TWIGA. TWIGA Reach Mower 555/600/655T/700T 555FR/600FR. Edition 2.5 June 2014 Part No TWIGA Reach Mower 555/600/655T/700T 555FR/600FR Edition 2.5 June 2014 Part No. 8999057 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 Slew Post 8 Lift Frame 10 Tank Lid 12 Rear Panel 13 Stabiliser Brackets

More information

Hakki Pilke 42 Easy FIREWOOD PROCESSOR SPARE PARTS MANUAL

Hakki Pilke 42 Easy FIREWOOD PROCESSOR SPARE PARTS MANUAL ENGLISH Hakki Pilke 42 Easy FIREWOOD PROCESSOR SPARE PARTS MANUAL MAASELÄN KONE OY Valimotie 1, 85800 Haapajärvi tel.08-7727300, fax.08-7727320 info@maaselankone.fi www.maaselankone.fi 2 Table of contents

More information

STX-26 Stump Grinder

STX-26 Stump Grinder Form No. 3365-311 Rev B STX-26 Stump Grinder Model No. 23210 Serial No. 310000001 and Up Model No. 23210G Serial No. 310000001 and Up Register at www.toro.com. Original Instructions (EN) *3365-311* B Ordering

More information

ConstructionParts.com

ConstructionParts.com Main assy, engine plate and lower part 18213-2 6 Main assy, engine plate and lower part Item Part No Rem Qty Description 1 D391218-01 1 Engine plate 2 Handle ( Page 60 ) 3 Ground plate and eccentric element

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1106 020 2506 1 Crankcase (2) 2-11 2 0000 988 5217 1 Connector (2) 3 0000 988 5200 2 Connector (2) 4 1106 641

More information

Model 5005i Parts. Manual # Revised

Model 5005i Parts. Manual # Revised Manual # 99904274 Model 5005i Parts Revised 20110802 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright 2009 Iowa Mold Tooling

More information

PA 32. Parts Manual HEDGE/GRASS TRIMMER. Publication 410 August 2001 Part No Revision:

PA 32. Parts Manual HEDGE/GRASS TRIMMER. Publication 410 August 2001 Part No Revision: Publication 410 August 2001 Part No. 41570.11 Revision: 17.01.07 PA 32 HEDGE/GRASS TRIMMER Parts Manual For best performance USE ONLY GENUINE McCONNEL SERVICE PARTS To be assured of the latest design improvements

More information

ARTICULATED BOOM LIFT MODEL TA50E

ARTICULATED BOOM LIFT MODEL TA50E ARTICULATED BOOM LIFT MODEL TA0E PARTS MANUAL TEREX AERIALS 0600 W. Brown Deer Road Milwaukee, WI 3 U.S.A. Telephone:() 36-9300 Facsimile:() 3-03 TEREX AERIALS Courtstown Industrial Park Little Island,

More information

PAGE DESCRIPTION REF. NO.

PAGE DESCRIPTION REF. NO. TABLE OF CONTENTS PAGE DESCRIPTION REF. NO. - CONTENTS PAGE... CE-077 1 CRANE SAFETY AND HAZARDS... CE-044 2 OPERATING INSTRUCTIONS... CE-039 3 DIMENSIONS AND CAPACITIES... CE-020 4 ASSEMBLY PAGE 1 UNPACKING...

More information

SURGICAL TABLE PARTS MANUAL

SURGICAL TABLE PARTS MANUAL SURGICAL TABLE PARTS MANUAL 3600B UltraSlide REV 9/0 Page 1 INTRODUCTION This manual contains the exploded views and replacement parts lists for the serviceable components of the SKYTRON Model 3600B UltraSlide

More information

Boxer 532DX Parts Manual

Boxer 532DX Parts Manual BIG POWER IN ALL PLACES Boxer 5DX Parts Manual SN and Higher Part No. 5- Phone: Sales - 00--00, Parts and Service - 00-55- www.boxerequipment.com Manufactured by: Morbark, Inc. 50 S. Winn Rd., P.O. Box

More information

PARTNERIllustrated Parts List CD

PARTNERIllustrated Parts List CD PARTNERIllustrated Parts List 2000-05 CD K2000 EL 1986-1989 Identify by a Red serial number plate 108 30 01-10 505 53 03-03 506 15 07-01 723 22 84-85 505 52 02-16 723 13 03-01 505 53 03-90 505 53 03-56

More information

Spare parts list Trowel STG244 F TP

Spare parts list Trowel STG244 F TP Spare parts list Trowel STG244 F TP Valid from serial number Valid to serial number BGF111601- www.cp.com STG244 F TP Spare parts list General information This spare parts list applies to the following:

More information

CONTAINER GUIDE WELDMENTS

CONTAINER GUIDE WELDMENTS CONTAINER GUIDE WELDMENTS FOR MODELS - ALL FRONT LOAD CONTAINERS 4/98 1 9110--39--0 L.H. Container Guide Weldment 1 2 9110--38--0 R.H. Container Guide Weldment 1 3 9110--56--1 Instruction Sheet (Not Shown)

More information

Retriever 5100G/P. 11/89 revised 10/02 FORM NO

Retriever 5100G/P. 11/89 revised 10/02 FORM NO Retriever 5100G/P PARTS LIST Advance MODELS 56497000, 56497010 This parts list is for machines after serial number 353005 All models covered in this manual are OBSOLETE 11/89 revised 10/02 FORM NO. 56042216

More information

50D MS Standard Mast

50D MS Standard Mast P ARTS MANUAL This manual contains standard production Product Identification Numbers. Special Engineered Options not included. 0D MS Standard Mast For PIDs 0D-MS-00 Through Present FOR PARTS AND SERVICE:

More information

file://c:\programdata\proquestms\partsmanagerpro\print\ ~13~11~5.html

file://c:\programdata\proquestms\partsmanagerpro\print\ ~13~11~5.html C60TLRZ 00 file://c:\programdata\proquestms\partsmanagerpro\print\8-9-0 ~~~5.html Page of 6 8/9/0 C60TLRZ 00 / TOP COWLING 0 Yamaha Motor Corporation, U.S.A. All rights reserved. C60TLRZ 00 file://c:\programdata\proquestms\partsmanagerpro\print\8-9-0

More information

STX-38 EFI Stump Grinder with Intelli-Sweep

STX-38 EFI Stump Grinder with Intelli-Sweep Form No. 3421-244 Rev A STX-38 EFI Stump Grinder with Intelli-Sweep Model No. 23214 Serial No. 402000000 and Up Register at www.toro.com. Original Instructions (EN) *3421-244* A Ordering Replacement Parts

More information

This Manual contains standard Production Product Identification Numbers. Special Engineered Options not Included. 110D MT Triple Mast

This Manual contains standard Production Product Identification Numbers. Special Engineered Options not Included. 110D MT Triple Mast P ARTS MANUAL This Manual contains standard Production Product Identification Numbers. Special Engineered Options not Included 0D MT Triple Mast For 0D-MT-00 Through Present FOR PARTS AND SERVICE: TELEPHONE:

More information

CYLINDER HEAD. Ref. Part No. Number Description Qty Remarks

CYLINDER HEAD. Ref. Part No. Number Description Qty Remarks A1 CYLINDER HEAD 1 JN6-11102-00-00 HEAD, CYLINDER.......... 1 2 JN6-11133-10-00. GUIDE, VALVE............ 2 3 JN6-11181-00-00 GASKET, CYLINDER HEAD... 1 4 95817-10070-00 BOLT, FLANGE............ 4 5 99530-14016-00

More information

BEFCO. Parts Manual CYCLONE SERIES 3. Three Spindle Grooming Mower , ,

BEFCO. Parts Manual CYCLONE SERIES 3. Three Spindle Grooming Mower , , BEFCO Parts Manual CYCLONE SERIES Three Spindle Grooming Mower 0907, 07 0907, 07 BEFCO PM 090(7, 7), 0(7, 7) (US) Printed on November 9, 009 Parts Manual /009 0907, 07 0907, 07 CYCLONE SERIES FRAME OPERATOR

More information

IMT 3203i Technical Specifications & Parts

IMT 3203i Technical Specifications & Parts Manual # 99904380 IMT 3203i Technical Specifications & Parts Revision Date 2050707 IOWA MOLD TOOLING CO., INC. PO Box 89 Garner, IA 50438 Tel: 64-923-37 FAX: 64-923-2424 Website: http://www.imt.com Copyright

More information

Spare Parts Catalogue

Spare Parts Catalogue Vibratory Roller 102 onstructionparts.com 888-634-4289 Spare Parts atalogue S102-4EN1 Valid from roller serial number: 10000305x0A000001 - onstructionparts.com iesel engine: EUTZ 2011 L02 Published catalogue

More information

PA 52 HY REACH. Mk2 Models. Parts Manual. Publication 490 October 2005 Part No Revision:

PA 52 HY REACH. Mk2 Models. Parts Manual. Publication 490 October 2005 Part No Revision: Publication 490 October 2005 Part No. 41570.90 Revision: 07.11.08 PA 52 HY REACH Mk2 Models Parts Manual For best performance USE ONLY McCONNEL SERVICE PARTS To be assured of the latest design improvements

More information

Model 6006i Parts. Manual # Effective Serial Number #3970 and up. Revised

Model 6006i Parts. Manual # Effective Serial Number #3970 and up. Revised Manual # 99903711 Model 6006i Parts Effective Serial Number #3970 and up. Revised 20110802 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com

More information

Model 7/51. Instruction Manual

Model 7/51. Instruction Manual 99903276: IM-7/51: 20111201 PAGE 1 Model 7/51 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining

More information

Villa 320 HST (2015) Documents. Technical information. Villa 320 HST (2015) Assembly parts. Body works. Seat. Steering. Controls.

Villa 320 HST (2015) Documents. Technical information. Villa 320 HST (2015) Assembly parts. Body works. Seat. Steering. Controls. Documents Assembly parts Body works Seat Steering Technical information Article number 13-5711-51 Item Status Available Season 2012-2015 Brand Code Stiga Engine cooling Air Cutting height adjustment Manual

More information

9/9/2014 F15MSHC 2004 / TOP COWLING Yamaha Motor Corporation, U.S.A. All rights reserved.

9/9/2014 F15MSHC 2004 / TOP COWLING Yamaha Motor Corporation, U.S.A. All rights reserved. F5MSHC 00 Page of 6 9/9/0 F5MSHC 00 / TOP COWLING 0 Yamaha Motor Corporation, U.S.A. All rights reserved. F5MSHC 00 Page of 6 9/9/0 Part List F5MSHC 00 / TOP COWLING REF - NO PART NUMBER PART NAME QUANTITY

More information

8 PARTS MANUAL 8.1 LIFT ASSEMBLY

8 PARTS MANUAL 8.1 LIFT ASSEMBLY 8 PARTS MANUAL 8.1 LIFT ASSEMBLY 19 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY DESCRIPTION PART # 1 1 TOWER WELDMENT, POWER SIDE 4-1010 2 2 CARRIAGE WELDMENT 4-1114 3 8 GLIDE BEARING 2-0772 4 4 GREASE NIPPLE

More information

For New Holland CR 920/940/960/970/980/9040/9060/9080 CX 720/740/760/780/820/840/860/880/8030/8040/8050/8060/8070/8080/8090

For New Holland CR 920/940/960/970/980/9040/9060/9080 CX 720/740/760/780/820/840/860/880/8030/8040/8050/8060/8070/8080/8090 PARTS CATALOG MUD HOG REAR WHEEL DRIVE For New Holland CR 920/940/960/970/980/9040/9060/9080 CX 720/740/760/780/820/840/860/880/8030/8040/8050/8060/8070/8080/8090 TUTHILL DRIVE SYSTEMS MODEL NUMBERS: CNH4005

More information

MODEL P Parts List UNIT SERIAL NUMBER MANUAL NUMBER: AB-F EFFECTIVE 06/2016

MODEL P Parts List UNIT SERIAL NUMBER MANUAL NUMBER: AB-F EFFECTIVE 06/2016 Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 06/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway Equipment

More information

Illustrated Parts List

Illustrated Parts List Illustrated Parts List. Ordering Parts For your convenience, replacement parts and accessories can be ordered from ARPAC by fax 24 hours a day. Please have the following information available to ensure

More information

Retriever 360G/P. 5/92 revised 2/01 FORM NUMBER

Retriever 360G/P. 5/92 revised 2/01 FORM NUMBER Retriever 360G/P PARTS LIST Advance MODELS 56468470, 56468480 This parts list is for machines after serial number 505073 All models covered in this manual are OBSOLETE 5/92 revised 2/01 FORM NUMBER 56042267

More information

Model 9/63. Instruction Manual

Model 9/63. Instruction Manual 99903278 : IM-9/63: PAGE 1: 20111201 Model 9/63 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining

More information

FX140 & FX140R Skidding Winch Parts Manual

FX140 & FX140R Skidding Winch Parts Manual EMB Manufacturing Inc. 4144 Boomer Line St. Clements, On N0B 2M0 Canada Ph: (519) 699-9283 Fax: (519) 699-4146 www.wallensteinequipment.com FX140 & FX140R Skidding Winch Parts Manual S/N 514094 & After

More information

PA 40 SERIES AIR POWER PUMPS

PA 40 SERIES AIR POWER PUMPS PA 40 SERIES AIR POWER PUMPS Parts Identification Manual For Air Powered Hydraulic Pumps PAD, PAM, and PAS Models Revison B 04/2008 2525 Gardner Road * Broadview, Il. 60155 * (800)323-9114 * www.tksimplex.com

More information

STX-26 Stump Grinder

STX-26 Stump Grinder Form No. 3383-656 Rev B STX-26 Stump Grinder Model No. 23208 Serial No. 314000001 and Up Model No. 23208G Serial No. 314000001 and Up Register at www.toro.com. Original Instructions (EN) *3383-656* B Ordering

More information

Series. This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown.

Series. This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown. 2525 GARDNER ROAD, BROADVIEW, IL 60155 1.800.323.9114 Outside U.S. 1.708.865.1500 www.tksimplex.com G4 SERIES ELECTRIC POWER PUMP PARTS IDENTIFICATION MANUAL Reference # - Rev. - A Date - 05/10 This illustration

More information

Spare parts list Pentruder Modular Drilling System

Spare parts list Pentruder Modular Drilling System Spare parts list Pentruder Modular Drilling System Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M

More information

Boxer 530X Parts Manual

Boxer 530X Parts Manual BIG POWER IN ALL PLACES Boxer 50X Parts Manual Part No. 999-1 (SN 10 and Higher) Table of Contents Parts List and Illustrations Page Number Routine Maintenance Replacement Parts...iv Creep Valve... 2

More information

TH23 POWER HOOK Spare Parts Manual

TH23 POWER HOOK Spare Parts Manual TH23 POWER HOOK Spare Parts Manual For spares and service support & the latest service network listings refer to www.edbro.com Spares Tel: +44 (0) 120 4902319 Spares fax: +44 (0) 120 4393561 Service Tel:

More information

Retriever 5800G/P/D. revised 2/01 Form Number

Retriever 5800G/P/D. revised 2/01 Form Number Retriever 5800G/P/D PARTS LIST Advance MODELS 56482005, 56482010, 56482015 This parts list is for machines after serial number 221134 All models covered in this manual are OBSOLETE revised 2/01 Form Number

More information

8 PARTS MANUAL 8.1 LIFT ASSEMBLY

8 PARTS MANUAL 8.1 LIFT ASSEMBLY 8 PARTS MANUAL 8.1 LIFT ASSEMBLY 19 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY DESCRIPTION PART # 1 1 TOWER WELDMENT, POWER SIDE 4-0767 2 2 CARRIAGE WELDMENT 4-0778 3 8 GLIDE BEARING 2-0772 4 4 GREASE NIPPLE

More information

PA47 Mk3 HEDGECUTTER / MOWER. Parts Manual. Publication 555 October 2008 Part No Revision:

PA47 Mk3 HEDGECUTTER / MOWER. Parts Manual. Publication 555 October 2008 Part No Revision: Publication 555 October 2008 Part No. 41571.55 Revision: 17.03.09 PA47 Mk3 HEDGECUTTER / MOWER Parts Manual For best performance USE ONLY GENUINE SERVICE PARTS To be assured of the latest design improvements

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL 28V SERIES SNOW PLOWS FOR PLOW SERIAL NUMBERS AFTER 28VG100000 28VD100000 07 Sno-Way International 9710097F TABLE OF CONTENTS Page PARTS LIST INTRODUCTION... 2 POWER PACK FRAME...

More information

Spearhead TWIGA. TWIGA Reach Mower 555/600/655T 555FR/600FR. Edition 2.0 March 2011 Part No

Spearhead TWIGA. TWIGA Reach Mower 555/600/655T 555FR/600FR. Edition 2.0 March 2011 Part No TWIGA Reach Mower 555/600/655T 555FR/600FR Edition 2.0 March 2011 Part No. 8999057 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 Slew Post 8 Lift Frame 10 Tank Lid 12 Rear Panel 13 Stabiliser Brackets

More information

C330 FRONT AXLE ASSEMBLY PARTS LIST

C330 FRONT AXLE ASSEMBLY PARTS LIST C330 FRONT AXLE ASSEMBLY PARTS LIST 1. Chassis 04 327023302 2. Steering Arm 32702501 3. Washer M10 088002400 4. Coach Bolt M10 x 60mm zinc clear 018005000 5. Nyloc Nut M10 04886100 6. Stub Axle Spacer

More information

This manual contains standard production Product Identification Numbers. Special Engineered Options not included.

This manual contains standard production Product Identification Numbers. Special Engineered Options not included. P ARTS MANUAL This manual contains standard production Product Identification Numbers. Special Engineered Options not included. 45DV-MQ Full Freelift 4-Stage Opti-Vis Quad Mast FOR PARTS AND SERVICE: TELEPHONE:

More information

Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG

Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors 1 PARTS CATALOG TABLE OF CONTENTS Frame & Tractor Linkage...2,3 Header Linkage & Float Group...4,5 Header Drive Hydraulics

More information

COMPACTOR & RAM ASSEMBLY

COMPACTOR & RAM ASSEMBLY P1 P2 COMPACTOR & RAM ASSEMBLY FOR MODELS - ALL 5/02 Item Part Number Part Description Qty. 1 64--129 1--1/2 STD. Flat Washer 10 2 9121--1--8 Cylinder Pin, Base 1 3 60--608 1/4 DIA. x 2--1/2 Roll Pin --

More information

P773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators

P773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the

More information

Series. This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown. Pendants - pg.

Series. This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown. Pendants - pg. Power Control Center PENDANT FUNCTION In event multiple buttons are depressed for seconds, the power pump will shutdown. TO RESTART PUMP Press the On button to restart. If problem persists, unplug the

More information

Prodigy Parts Manual Part No

Prodigy Parts Manual Part No Prodigy Parts Manual Part No. 999-858.01 Table of Contents Parts List and Illustrations Page Number Kits and Routine Maintenance Parts Table...iv Hydraulic Component Location... 1 Engine and Hydraulic

More information

Spare parts list ( ) Spare parts list KMR 1250 BAT

Spare parts list ( ) Spare parts list KMR 1250 BAT Spare parts list (5.963-806.0) Spare parts list KMR 1250 BAT 14.01.2013 www.kaercher.com EN Table of contents Spare parts list KMR 1250 BAT (5.963-806.0)... 6 10 Individual parts (0.209-961.0)... 7 11

More information

6280 PART NUMBERS & DIAGRAMS

6280 PART NUMBERS & DIAGRAMS EXTERNAL PARTS 112 73330 111-2D 73313 73315 6280HD-146 136 230 73242 73205 73213 162 206 207 73245 179 73020 168 178 206 73228 73221 241 73221 6280-110 Wheel Spacer (Not Shown) 6280-111-2D Wheel with Hub

More information

CS340ES. Property of - Not for Resale A1

CS340ES. Property of   - Not for Resale A1 A1 CYLINDER HEAD - CYLINDER 1 8G8-11111-00-00 HEAD, CYLINDER 1......... 1 2 8G8-11121-00-00 HEAD, CYLINDER 2......... 1 3 NGK-BR9ES-00-00 PLUG, SPARK............. 2 4 8G8-11181-01-00 GASKET, CYLINDER HEAD

More information

This manual contains standard production Product Identification Numbers. 35DV MQ Full Freelift 4-Stage Opti-Vis Quad Mast

This manual contains standard production Product Identification Numbers. 35DV MQ Full Freelift 4-Stage Opti-Vis Quad Mast PARTS MANUAL This manual contains standard production Product Identification Numbers. 35DV MQ Full Freelift 4-Stage Opti-Vis Quad Mast FOR PARTS AND SERVICE CALL: 1-877-430-6302 Manual Number: 263917 R8

More information

This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown.

This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown. 2525 GARDNER ROAD, BROADVIEW, IL 60155 1.800.323.9114 Outside U.S. 1.708.865.1500 www.tksimplex.com G5 SERIES ELECTRIC POWER PUMP PARTS IDENTIFICATION MANUAL Reference # - 54247 Rev. - A Date - 10/08 This

More information

Boxer 120 Parts Manual

Boxer 120 Parts Manual BIG POWER IN ALL PLACES Boxer Parts Manual Serial No.s 4 & Higher Part No. 45- Phone: Sales - 00--004, Parts and Service - 00-55-9 www.boxerequipment.com Morbark, Inc. 50 S. Winn Rd., P.O. Box 00, Winn,

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase, Cylinder Illustration A Crankcase, Cylinder Ref.Nr. Item code Quantity Description 1 1113 020 2107 1 Crankcase (1,2,4,5,7,8) 2-11 1 1113 020 2108 1 Crankcase (3,6) 2-11 2 1113

More information

Spare parts list ( ) Spare parts list B60 W Bp UL

Spare parts list ( ) Spare parts list B60 W Bp UL Spare parts list (5.971-886.0) Spare parts list B60 W Bp UL 14.12.2012 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list B60 W Bp UL (5.971-886.0)... 6 10 Tank (0.166-284.0)...

More information

HYDRAULIC BREAKER HAMMER HB 50 J HAMMER HB 50 L HAMMER HB 50 U

HYDRAULIC BREAKER HAMMER HB 50 J HAMMER HB 50 L HAMMER HB 50 U PARTS MANUAL ver. 1.1 PMHB50ENG.051011 HYDRAULIC BREAKER HB 50 J HB 50 L HB 50 U Serial No. TRK500005-UP TRK510005-UP TRK520005-UP TABLE OF CONTENTS 1. Housing unit 50J... 4 2. Housing unit 50L... 6 3.

More information

MODEL SUPER P Parts List

MODEL SUPER P Parts List MODEL Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 05/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway

More information

TW60 Book No S/N E Cover

TW60 Book No S/N E Cover TW60 Book No. 06564 0.06 S/N E04062 Cover Ref Cover Page 0 TW60 Book No. 06564 0.06 S/N E04062 Index 22 24 23 30 5 27 3 4 6 6 25 3 2 2 26 5 2 7 2 7 5 20 2 Ref main Page 0- main Item Part number Description

More information

10/72 Technical Specifications

10/72 Technical Specifications Manual # 99905403 10/72 Technical Specifications Revision Date 20120202 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright

More information

One Step Rod Cutter Rear Pull

One Step Rod Cutter Rear Pull One Step Rod Cutter Rear Pull Drivelines Section 13 Model Years 1988 1991 (Secondary Driveline) 1 Solid Shaft... 2-5 Model Years 1988 1992 (Primary Driveline) G & G... 6-11 Model Year 1992 (Secondary Driveline)

More information

Parts Catalog SLICING MACHINES

Parts Catalog SLICING MACHINES Parts Catalog Model 4600P SLICING MACHINES MODELS: 4600P, 4975P & 493 05-0-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT

More information

TMH 15000/5. 15TE / 5F Air Hoist 1:5 DRG /11/ ,5 313,5 1 / 1. If In Doubt Ask REVISION HISTORY. Part Number.

TMH 15000/5. 15TE / 5F Air Hoist 1:5 DRG /11/ ,5 313,5 1 / 1. If In Doubt Ask REVISION HISTORY. Part Number. D-AH REV ITEM QTY PART NUMBER DRG 7 DRG 7 TMH PARTS LIST DESCRIPTION Top Block Bottom Block Air Hoist (with Lever Plate DRG 7 ) REV. REVISION HISTORY REV. DATE APPROVED : Scale Designed By Drawn By Checked

More information

CYLINDER HEAD - CYLINDER

CYLINDER HEAD - CYLINDER A1 CYLINDER HEAD - CYLINDER 1 8AY-11111-00-00 HEAD, CYLINDER 1......... 1 2 8A7-12499-00-00 JOINT................... 1 3 NGK-BR9ES-00-00 PLUG, SPARK............. 2 4 8AY-11181-00-00 GASKET, CYLINDER HEAD

More information

PARTS CATALOG MUD HOG REAR WHEEL DRIVE

PARTS CATALOG MUD HOG REAR WHEEL DRIVE PARTS CATALOG MUD HOG REAR WHEEL DRIVE For Case IH AF 7230, 8230, 9230 Combines TUTHILL DRIVE SYSTEMS MODEL NUMBERS: CNH14023 DUAL SPEED KIT FOR CASE IH AF 7230, 8230, 9230 COMBINES A Product of Tuthill

More information

Model 425 Crane. Volume 2 - PARTS AND SPECIFICATIONS

Model 425 Crane. Volume 2 - PARTS AND SPECIFICATIONS 00000425:99900268: 20120410 Model 425 Crane Volume 2 - PARTS AND SPECIFICATIONS Section 1 SPECIFICATIONS Section 2 CRANE REFERENCE Section 3 REPLACEMENT PARTS Section 4 GENERAL REFERENCE IOWA MOLD TOOLING

More information

CYLINDER - CYLINDER HEAD

CYLINDER - CYLINDER HEAD A1 CYLINDER - CYLINDER HEAD 1 3FA-11110-00-00 CYLINDER HEAD ASSEMBLY. 1 2 95612-06625-00. BOLT, STUD............. 2 3 22F-11134-10-00. GUIDE, EXHAUST VALVE... 2 4 93440-10109-00. CIRCLIP.................

More information

9010 A/E. Rim Clamp Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies

9010 A/E. Rim Clamp Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies 9010 A/E Rim Clamp Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies s Identification READ these instructions before placing unit in service KEEP these and other

More information

HYDROBURST HB3038, HB5058, HB80, HB125

HYDROBURST HB3038, HB5058, HB80, HB125 TM HYDROBURST HB3038, HB5058, HB80, HB125 Parts Manual HYDROBURST HB3038, HB5058, HB80 & HB125 s/n Part No. PM1251 INTRODUCTION HOW TO USE THE MANUAL This manual contains illustrations and parts list of

More information

PARTS LIST, COUNTER CONVECTION STEAMERS MODELS SN-3E, SN-4E, SN-5E PARTS LIST COUNTER CONVECTION STEAMERS BLODGETT MODELS: SN-3E SN-4E

PARTS LIST, COUNTER CONVECTION STEAMERS MODELS SN-3E, SN-4E, SN-5E PARTS LIST COUNTER CONVECTION STEAMERS BLODGETT MODELS: SN-3E SN-4E PARTS LIST COUNTER CONVECTION STEAMERS BLODGETT MODELS: SN-3E SN-4E November 27, 2013 BLODGETT OVEN CO 44 lakeside Ave Burlington, VT 05446 Tel. 802-658-6600 Fax 802-860-3732 www.blodgett.com 1 2013-11-27

More information

250P Manure Spreader

250P Manure Spreader 0P Manure Spreader Illustrated Parts Breakdown Page - Page Page Page Page Page Page Page Page Page Page Page Page Page Page - Page Page Page 0 Complete Front End PTO/Jack/Hitch Assembly Front Pulley Assembly

More information

Model CAS35WG Maintenance & Parts

Model CAS35WG Maintenance & Parts 1 CAS5WG AIR COMPRESSOR / WELDER / GENERATOR IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 5048 Tel: 641-92-711 FAX: 641-92-2424 Website: http:// Manual # 99904771 Revised 2011121 Iowa Mold Tooling

More information

20/138SL Technical Specifications

20/138SL Technical Specifications Manual # 99904617 20/138SL Technical Specifications Revision Date 20120912 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright

More information

Electronic Service Manuals

Electronic Service Manuals Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions

More information