Low Voltage Circuit Breakers & Contactors

Transcription

1 Low Voltage Circuit Breakers & Contactors MCB / MS / Mini-MC / EMPR / DMPR / MMS / MCCB / ACB / VCB Electric Equipment

2 Page 4 1, 2, 3 and 4 pole series up to 125AF B, C and D Characteristics Page 6 2 and 4 pole series up to 63AF Sensitivity up to 300mA Overcurrent protection type available Metasol/Meta-MEC series 3 and 4 pole series up to 800AF Mini-contactors available AC/DC common use coil from 100AF Thermal (Bimetallic) and electronic type overload relays are available CE marked and UL approved Page 8 Page 18

3 Susol/Metasol/Meta-MEC series 2, 3 and 4 pole series up to 1600AF Rated ambient temperature at 40 calibrated for 50 available CE marked according to IEC standard and UL approved MCCBs are also available. Page 20 Page 30 Susol/Metasol series 65, 85 and 150kA breaking capacity High functional digital trip relays CE marked and Marine classiflcation Page 36 Susol series

4 Miniature circuit breakers 1, 2, 3 and 4 pole series up to 125AF Type BKP BKN Protection Overload and short circuit Overload and short circuit Rated current 3,6,10,16,20,25,32A 1,2,3,4,6,10,16,20,25,32,40,50,63A Characteristic B, C, D curve B, C, D curve Number of poles 1p+N 1p, 1p+N, 2p, 3p, 3p+N, 4p Breaking capacity 1 pole 2~4 pole 1A 2A 3A 4A 6A 10A 4.5kA at 6kA at 6kA at 16A 230VAC 230/400VAC 400VAC 20A 25A 32A 40A 50A 63A 80A 100A 125A Standard IEC IEC Type of trip Thermal magnetic release Thermal magnetic release Thermal magnetic release Electrical endurance operations 6000 operations Mount On 35mm DIN rail On 35mm DIN rail Width 9mm per pole 17.8mm per pole Terminal Lug type(cable up to 10 mm2 ) Lug type(cable up to 25 mm2 ) Auxiliary switch, AX Optional Dimension See drawing 1 See drawing 2 Characteristic curve See curve 1 See curve 1 1 changeover contact 6A at 240VAC, 3A at 415VAC 2A at 48VDC, 1A at 125VDC Lug terminal cable capacity 2.5mm2 9mm wide Drawing 1 : Type BKP Drawing 2 : Type BKN (22) (17) (22) (14)

5 BKN-b BKH Overload and short circuit Overload and short circuit 1,2,3,4,6,10,20,25,32,40,50,63A 63, 80, 100, 125A B, C, D curve C, D curve 1p, 1p+N, 2p, 3p, 3p+N, 4p 1p, 1p+N, 2p, 3p, 3p+N, 4p 1 pole 2~4 pole 1 pole 2~4 pole 10kA at 400VAC 10kA at 400VAC Curve 1 : Type BKP, BKN, BKN-b, BKH, RKP 10kA at 230/400VAC 10kA at 400VAC IEC IEC Thermal magnetic release 8000 operations 6000 operations On 35mm DIN rail On 35mm DIN rail 17.8mm per pole 27mm per pole Lug type(cable up to 25mm2 ) Lug type(cable up to 50mm2 ) See drawing 3 See drawing 4 See curve 1 See curve 1 Drawing 3 : Type BKN-b (19) (33) Drawing 4 : Type BKH

6 Residual current circuit breakers 2 and 4 pole series up to 63AF Type RKP RKS RKN Protection Ground fault and overcurrent Ground fault and overcurrent Ground fault Ground fault Rated current, In 3(C,D),6,10,16,20,25,32A(B,C,D curve) 6, 10, 16, 20, 25, 32A (B, C curve) 25, 32, 40, 63A Rated residual current Operating, I n 30, 100, 300mA(non-adjustable) 30, 100mA (non-adjustable) 30, 100, 300mA(non-adjustable) Non-operating, I no 0.5I n 0.5I n 0.5I n Number of poles 1P+N 1P+N 2, 4 pole Rated voltage 230VAC 230VAC 230VAC(2p), 230/400VAC(4p) Residual current off-time 0.1 sec. 0.3 sec. 0.1 sec. Standard IEC IEC IEC Type of trip Ground fault Electro-magnetic Electro-magnetic Electro-magnetic Overcurrent Thermal-magnetic Thermal-magnetic N.A Breaking capacity 4.5kA 10kA Conditional short circuit capacity 6kA for In=25, 32, 40, 63A Electrical endurance operations 4000 operations 6000 operations Mount On 35mm DIN rail On 35mm DIN rail On 35mm DIN rail Width 9mm per pole 9mm per pole 18mm per pole Terminal Lug type(cable up to 10 mm2 ) Lug type(cable up to 10 mm2 ) Lug type(cable up to 35 mm2 ) Dimension See drawing 1 See drawing 5 See drawing 2 Characteristic curve See page 5 (curve 1) Drawing 1 : Type RKP Drawing 2 : Type RKN (22) (17) N 1 N (22) (13) N N Drawing 3 : Type KGR Drawing 4 : Type BKD Drawing 5 : Type RKS (10)

7 32KGRa 32KGRb Ground fault and overcurrent 15, 20, 30A 15, 30mA(non-adjustable) 0.5I n 2 pole 110/220VAC 0.03 sec. KS, JIS *(IEC61009) Electronic Bimetallic 1.5kA 2.5kA Rated current, In Number of poles Rated voltage Type BKD 40, 50, 63, 80, 100, 125A 1p, 2p, 3p, 4p 230/400VAC Standard IEC Electrical 40, 50, 63A operations endurance 80, 100, 125A operations Mount Width On 35mm DIN rail 17.8mm per pole Terminal Lug type(cable up to 50 mm2 ) Dimension See drawing operations On 35mm DIN rail 35mm Screw clamp type(cable up to 25mm2 ) See drawing 3 See curve 1 Note) * IEC61009 standard is applicable for 32KGRa only. Curve 1 : Type 32KGRa, 32KGRb 7

8 Contactors & Overload relays Metasol MC 18 to 100A MC type Magnetic Contactors Frame size Type screws clamp terminals Number of poles MT type Thermal Overload Relays 18AF MC-6a MC-9a MC-12a MC-18a 3pole Rated operational voltage, Ue Rated insulation voltage, Ui Rated frequency Rated impulse withstand voltage, Uimp Maximum operating rate in operating cycles per hour(ac3) 50/60Hz 6kV 1800 operations per hour Durability Mechanical Electrical 15 mil. operations 2.5 mil. operations Current AC-1, Thermal current A and AC-3 200/240V kw power A /440V kw A /550V kw A kw A AC-4 200/240V kw A /440V kw A Size AC Weight kg 0.33 and H control Size(W H D) mm weight DC Weight kg 0.47 D W control Size(W H D) mm Auxiliary(standard) 1a or 1b Auxiliary Side mount Front mount UA-1 AU-2, AU-4 Note) Minimum conduct current of Auxiliary contactor is DC 17V 5mA. 22AF MC-9b MC-12b MC-18b MC-22b * 3pole 50/60Hz 6kV 1800 operations per hour 15 mil. operations 2.5 mil. operations a1b UA-1 AU-2, AU-4 Type Screws clamp terminals Rated operational voltage, Ue Rated insulation voltage, Ui Rated impulse withstand voltage, Uimp Trip class Setting range Size Weight kg and H weight Size(W H D) mm D W * The safety cover of magnetic contactor and thermal overload relay is optional. 8 MT-12/ 6kV 10A, ~18A MT-32/ 6kV 10A, ~40A

9 40AF MC-32a MC-40a 3pole 1000V 50/60Hz 8kV 1800 operations per hour 12 mil. operations 2 mil. operations a2b UA-1 AU-2, AU-4 65AF MC-50a MC-65a 3pole 1000V 50/60Hz 8kV 1800 operations per hour 12 mil. operations 2 mil. operations a2b UA-1 AU-2, AU-4 100AF MC-75a MC-85a MC-100a 3pole 1000V 50/60Hz 8kV 1800 operations per hour 12 mil. operations 2 mil. operations a2b UA-1 AU-2, AU-4 MT-32/ 6kV 10A, ~40A 0.17 MT-63/ 6kV 10A, 20 4~65A 0.31/0.33 MT-95/ 6kV 10A, 20 7~100A 0.48/

10 Contactors & Overload relays Metasol MC 150 to 800A MC type Magnetic Contactors Frame size Type screws clamp terminals Number of poles Rated operational voltage, Ue Rated insulation voltage, Ui Rated frequency Rated impulse withstand voltage, Uimp Maximum operating rate in operating cycles per hour(ac3) Durability Mechanical Electrical Current AC-1, Thermal current A and AC-3 200/240V kw power A 380/440V kw A 500/550V kw A kw A AC-4 200/240V kw A 380/440V kw A Size AC Weight kg and control Size(W H D) mm weight DC Weight kg D W Auxiliary(standard) Auxiliary Side mount Front mount H control Size(W H D) mm 150AF MC-130a MC-150a 3pole 1000V 50/60Hz 8kV 1200 operations per hour 5 mil. operations 1 mil. operations UA-1 AU-2, AU-4 225AF MC-185a MC-225a 3pole 1000V 50/60Hz 8kV 1200 operations per hour 5 mil. operations 1 mil. operations AU-100 (Max.4NO4NC) MT type Thermal Overload Relays Type Screws clamp terminals Rated operational voltage, Ue Rated insulation voltage, Ui Rated impulse withstand voltage, Uimp Trip class Setting range Size Weight kg and weight H D W Size(W H D) mm MT-150/ 6kV 10A, 20 34~150A MT-225/ 6kV 10A, 20 65~240A

11 400AF MC-265a MC-330a MC-400a 3pole 1000V 50/60Hz 8kV 1200 operations per hour 5 mil. operations 2.5 mil. operations 1 mil. operations 0.5 mil. operations AF MC-500a MC-630a MC-800a 3pole 1000V 50/60Hz 8kV 1200 operations per hour 2.5 mil. operations 0.5 mil. operations AU-100 (Max.4NO4NC) AU-100 (Max.4NO4NC) MT-400/ 6kV 10A, 20 85~400A 2.6 MT-800/ 6kV 10A, ~800A

12 Contactors & Overload relays 9 to 85A Frame size 9A 12A 18A 22A 3-pole Contactors Types AC coil GMC-9 GMC-12 GMC-18 GMC-22 DC coil GMD-9 GMD-12 GMD-18 GMD-22 Ratings / IEC kw A kw A kw A kw A AC AC3 200/240V /440V /550V Ratings / UL508 hp A hp A hp A hp A continuous current single phase 115V V three phase 200V V V V NEMA size Additional auxiliary contacts 2-pole Front mount 4-pole Front mount 2-pole Side mount 4-pole Contactors Types AC coil GMC-9/4 GMC-12/4 GMC-18/4 GMC-22/4 DC coil GMD-9/4 GMD-12/4 GMD-18/4 GMD-22/4 AC1(A) Overload Relays Bimetallic style Type GT GT-22 Setting ranges (A) Base for separate mount Class10A Class 20 Differential Non-differential (3-heater) Non-differential (2-heater) Differential GTK-22 GTH-22/3 GTH-22 GTK-22/L Electronic style Type GMP Setting ranges (A) Class 1 30 adjustable GMP22 Separate mount type 12

13 32A 40A 50A 65A 75A 85A GMC-32 GMC-40 GMC-50 GMC-65 GMC-75 GMC-85 GMD-32 GMD-40 GMD-50 GMD-65 GMD-75 GMD-85 kw A kw A kw A kw A kw A kw A hp A hp A hp A hp A hp A hp A pole Front mount 4-pole Front mount 2-pole Side mount GMC-32/4 GMC-40/4 GMC-50/4 GMC-65/4 GMC-75/4 GMC-85/4 GMD-32/4 GMD-40/4 GMD-50/4 GMD-65/4 GMD-75/4 GMD-85/ GT-40 Setting ranges (A) Base for separate mount GT-85 Setting ranges (A) Base for separate mount GTK-40 GTK-85 GTH-40/3 GTH-85/3 GTH-40 GTK-40/L GTH-85 GTK-85/L Setting ranges (A) 4-20 Setting ranges(a) : 16 ~ 80A Setting ranges(a) : 5 ~ 60A 8-40 GMP40 separate mount GMP80 Separate mount Wiring by screw GMP60 Separate mount Wiring by CT tunnel 13

14 Contactors & Overload relays 100 to 800A Frame size 100A 125A 150A 3-pole Contactors Types AC/DC common coil GMC-100 GMC-125 GMC-150 Ratings / IEC kw A kw A kw A AC AC3 200/240V /440V /550V Ratings / UL508 hp A hp A hp A continuous current single phase 115V V three phase 200V V V V NEMA size Additional auxiliary contacts AU-100 1NO+1NC, Side mount 4-pole Contactors Types AC/DC common coil GMC-100/4 GMC-125/4 GMC-150/4 AC1(A) Overload Relays Bimetallic style Type GT GT- 100 Setting ranges (A) GT- 150 Setting ranges (A) Class10A Class 20 Differential Non-differential (3-heater) Non-differential (2-heater) Differential GTK-100 GTH-100/3 GTH-100 GTK-100/L GTK-150 GTH-150/3 GTH-150 GTK-150/L 14

15 180A 220A 300A 400A 600A 800A GMC-180 GMC-220 GMC-300 GMC-400 GMC-600 GMC-800 kw A kw A kw A kw A kw A kw A hp A hp A hp A hp A hp A hp A AU-100 1NO+1NC, Side mount GMC-180/4 GMC-220/4 GMC-300/4 GMC-400/4 GMC-600/4 GMC-800/ Setting ranges (A) GT- 220 GTK-220 GTH-220/3 GTH-220 GTK-220/L Setting ranges (A) GT GTK-400 GTH-400/3 GTH-400 GTK-400/L Setting ranges (A) GT- 800 GTK-600 GTH-600/3 GTH-600 GTK-600/L 15

16 Mini contactors 6 to 16A Mini contactors 3NO main contacts 1 auxiliary contacts Screw clamp type Fast-on type Cage clamp type Solder pin type Frame size 6A 9A 12A 16A Screw clamp type AC coil GMC-6M GMC-9M GMC-12M GMC-16M DC coil GMD-6M GMD-9M GMD-12M GMD-16M Fast-on type AC coil GMC-6MF GMC-9MF GMC-12MF GMC-16MF DC coil GMD-6MF GMD-9MF GMD-12MF GMD-16MF Cage clamp type AC coil GMC-6MC GMC-9MC GMC-12MC GMC-16MC DC coil GMD-6MC GMD-9MC GMD-12MC GMD-16MC Solder pin type AC coil GMC-6MP GMC-9MP GMC-12MP GMC-16MP DC coil GMD-6MP GMD-9MP GMD-12MP GMD-16MP Ratings / IEC kw A kw A kw A kw A AC AC3 200/240V /440V /550V Ratings / UL508 hp A hp A hp A hp A continuous current Ith = 20A (maximum for cage clamp type is 10A) single phase 120V 1/2 1/2 1 * - 230V/240V ** - three phase 240V V *** - 600V Wire Range : Copper, 75 C, Stranded, 18-12AWG NEMA size Additional auxiliary contacts Screw clamp type Fast-on type Cage clamp type Solder pin type 2-pole, Front mount AU-2M AU-2MF AU-2MC 4-pole, Front mount AU-4M AU-4MF AU-4MC AU-1MP 2-pole, Side mount AU-1M Note) * = 1/2 for cage clamp type, ** = 1.5hp for cage clamp type, *** = 5hp for cage clamp type 16AF : not approved from UL AU-1MF AU-1MC Overload Relays Bimetallic style Type GT GT-12M Setting ranges (A) Base for separate mount Differential Non-differential (3-heater) Non-differential (2-heater) GTK-12M GTH-12M/3 GTH-12M 16

17 Digital motor protection relay DMP -S/Sa DMP -T/Ta Model No. DMP06-S/Sa DMP60-S/Sa DMP06-T/Ta DMP06-T/Ta Wiring Screw type Tunnel type Panel mount Operation time Unit or Extension Note1) Protection Over current According to the setting time Select either reverse time characteristics or definite time characteristics Phase failure 3 sec. Reverse phase Within 0.1 sec. Asymmetry 5 sec. Stall 5 sec. Lock Within 0.5 sec. Under current 3 sec. Ground fault Within 0.05~1 sec. Selectable (0.05~1.0sec) Short circuit Note2) Within 50ms Alarm Variable (60~110% of the setting current) Current setting range (A) 0.5~6 5~60 0.5~6 5~60 Motor capacity 220~240V 0.09~ ~ ~ ~11 (kw) 380~440V 0.12~ ~ ~ ~22 Time setting Definite Delay in starting 0~60sec range (sec) time Delay in operating 0~30sec Inverse time 0~60sec Reset Manual reset Tolerance Current ±5% Time ±5% (or±0.5sec) Operating power Voltage AC 190~250V Note3) Frequency 60Hz (50Hz) Aux. contact OL 2-SPST 3A/250Vac Resistive load AL SPST 3A/250Vac Resistive load Insulation resistance Over DC500V 100MΩ Surge impulse voltage(iec ) μs 6kV (Apply standard wave form) Fast transient burst(iec ) 2.5kV/5min Environment Temperature Operation -25~70 Storage -30~80 Humidity 30~90% RH (No freezing) Display 7-Segment 3 phase current, cause of a fault Bar-Graph 60~110% of real load current Mounting type 35mm Din-rail/Panel Note1) In extension type, the digital EMPR is calibrated with combining the display past and main body so, please cautious not to combine the display part and main body with different part No. Note2) Instantaneous short circuit protection is optional Note3) Operational voltage of AC 110V and 50Hz is optional 17

18 Manual motor starters Quick selection table... IEC rating Frame 32AF Type Current adjustable type MMS-32S MMS-32H Instantaneous type - MMS-32HI Breaking capacity Standard High breaking Handle Type Toggle Rotary Number of poles 3 3 Rated operational voltage (Ue) Up to Up to Rated frequency 50/60 Hz 50/60 Hz Rated insulation voltage (Ui) Rated impulse voltage (Uimp) 6kV 6kV Utilization category IEC (Breaker) Cat. A Cat. A IEC (Motor starter) AC 3 AC 3 Mechanical endurance (Operating) 100, ,000 Electrical endurance (Cycles) 100, ,000 Max operating frequency per hour (Ope./h) Temperature compensation (Operation) -20 ~ ~ +60 Instantaneous short circuit release 13 Ie max. 13 Ie max. Overload protection Phase failure function Trip indicating function Test function Weight (g) Rated breaking capacity (ka) Rated operational current (Ie) Thermal release Adjustment range (A) 0.1~ ~ ~ ~ ~1 1~ ~ ~4 4~6 5~8 6~10 9~13 11~17 14~22 18~26 22~32 28~40 34~50 45~63 55~75 70~90 80~ V 240V 230V 415V 460V 525V 400V 440V 500V 600V Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics V 240V 230V 415V 460V 525V 400V 440V 500V 600V Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics

19 220V 240V 230V 63AF 100AF MMS-63S MMS-63H MMS-100S MMS-100H - MMS-63HI - MMS-100HI Standard High breaking Standard High breaking Rotary Rotary Rotary Rotary Up to Up to Up to Up to 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 1,000V 1,000V 1,000V 1,000V 8kV 8kV 8kV 8kV Cat. A Cat. A Cat. A Cat. A AC 3 AC 3 AC 3 AC 3 50,000 50,000 50,000 50,000 25,000 25,000 25,000 25, ~ ~ ~ ~ Ie max. 13 Ie max. 13 Ie max. 13 Ie max. 1,000 1,000 2,200 2, V 460V 525V 220V 220V 415V 460V 525V 415V 460V 525V 220V 415V 460V 525V 400V 440V 500V 600V 240V 240V 240V 400V 440V 500V 600V 400V 440V 500V 600V 400V 440V 500V 600V 230V 230V 230V Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics Icu Ics

20 Mold case circuit breakers Susol MCCB Series Frame size Rated current, In 20 [AF] No. of poles Rated operational AC [V] voltage, Ue DC [V] Rated impulse withstand voltage, Uimp [kv] Rated insulation voltage, Ui [V] Rated ultimate short-circuit breaking capacity, Icu AC 50/60Hz 220/240V [ka] [A] 380/415V [ka] 440/460V [ka] 480/500V [ka] 660/ [ka] DC 250V [ka] 500V(2poles in series) [ka] Rated service breaking capacity, Ics [%Icu] Rated short-circuit making capacity Icm AC 50/60Hz 220/240V [ka] 380/415V [ka] 440/460V [ka] 480/500V [ka] 660/ [ka] Category of utilization Isolation behavior Trip unit (release) Thermal-Magnetic fixed-thermal, fixed-magnetic FTU adjustable-thermal, fixed-magnetic FMU adjustable-thermal, adjustable-magnetic ATU magnetic only MTU Electronic LSI ETS LSI ETM Option Earth-fault protection, Ig Zone selective interlocking, ZSI Ammeter Communication Earth-leakage protection module Connection fixed front-connection rear-connection plug-in front-connection rear-connection Mechanical life [operations] Electrical 415 V AC [operations] Basic dimensions, W H D 1-pole [mm] (front connection) 3-pole [mm] 4-pole [mm] Weight 1-pole [kg] (front connection) 3-pole [kg] 4-pole [kg] Reference standard TD100 TD160 TS P: 16, 20, 25, 32, 40, 50, 16, 20, 25, 32, 40, 63, 80, 100, 125, , 63, 80, 100 2, 3P: 100, 125, , 50, 63, 80, 100 2, 3, 4 1, 2, 3, 4 2, 3, (1P), (1P), N H L N H L N H L (1P) 50(1P) (1P) 25(1P) % 100% 100% 100% 100% 100% 100% 100% 100% (1P) 105(1P) A A A IEC IEC IEC Applicable to MCCBs equipped with FTU, FMU, ATU 2 pole MCCB in 3pole frame size 700A only available for TS800FTU Available for 3pole circuit breakers Under development Not applicable to 1pole

21 TS160 TS250 TS400 TS630 TS (100), 125, , 160, 200, , , , 800 2, 3, 4 2, 3, 4 2, 3, 4 2, 3, 4 2, 3, N H L N H L N H L N H L N H L % 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% A A A A A IEC IEC IEC IEC IEC The breakers with electronic trip units are available only at 3-pole version. (Only for AC supply) The trip unit ATU is available from 125A 21

22 Molded Case Circuit Breakers Metasol 30AF to 250AF Series Frame Size(AF) Type S-Type N-Type S-Type H-Type N-Type S-Type Type and Pole 2 pole ABS32c ABN52c ABS52c ABH52c ABN62c ABS62c 3 pole ABS33c ABN53c ABS53c ABH53c ABN63c ABS63c 4 pole ABS34c ABN54c ABS54c ABH54c ABN64c ABS64c Rated current, In A (3, 5, 10) 15, 20, 30, 15, 20, 30, 40, 50 15, 20, 30 40, 50 15, 20, 30, 40, 50, 60 Rated operational AC(V) voltage, Ue DC(V) Rated insulation voltage, Ui V Rated impulse withstand voltage, Uimp kv Rated short-circuit breaking capacity(icu) ka (Sym), KSC8321, IEC AC /500V /460V 14 (10) V 18 (14) /250V 30 (25) DC 500V(3P) V(2P) Service breaking capacity(%icu), Ics Category of use A A A A A A Endurance Mechanical (Number of operations) Electrical Type of trip unit Thermal-magnetic release Hydraulic-magnetic release Magnetic release only without thermal trip fixed fixed fixed fixed fixed fixed Earth leakage protection for 3 pole Accessories Electrical auxiliaries Auxiliary switch Alarm switch Shunt trip Undervoltage trip External accessories Direct rotary handle Extended rotary handle Terminal shield Insulation barrier Rear connection Pad handle lock Plug-in device Dimensions (mm) W H D mm mm mm mm Weight(kg) 2 pole pole pole Note): 1. applicable or available 2. available as a separate breaker 22

23 N-Type S-Type H-Type N-Type S-Type H-Type ABN102c ABS102c ABH102c ABN202c ABS202c ABH202c ABN103c ABS103c ABH103c ABN203c ABS203c ABH203c ABN104c ABS104c ABH104c ABN204c ABS204c ABH204c 15, 20, 30, 40, 50, 60, 75, , 20, 30, 40, 50, 60, 75, 100, , 125, 150, 175, 200, 225, A A A A A A fixed fixed fixed fixed fixed fixed mm mm mm

24 Molded Case Circuit Breakers Metasol 400AF to 800AF Series Frame Size(AF) 400 Type N-Type S-Type H-Type L-Type Type and Pole 2 pole ABN402c ABS402c ABH402c A BL402c 3 pole ABN403c ABS403c ABH403c ABL403c 4 pole ABN404c ABS404c ABH404c ABL404c Rated current, In A 250, 300, 350, 400 Rated operational AC(V) voltage, Ue DC(V) Rated insulation voltage, Ui V Rated impulse withstand voltage, Uimp kv Rated short-circuit breaking capacity(icu) ka (Sym), KSC8321, IEC AC Note): 1. applicable or available 2. available as a separate breaker 480/500V 415/460V 380V 220/250V DC 500V(3P) 250V(2P) Service breaking capacity(%icu), Ics Category of use Endurance Mechanical (Number of operations) Electrical Type of trip unit Thermal-magnetic release Hydraulic-magnetic release Magnetic release only without thermal trip Earth leakage protection for 3 pole Accessories Electrical auxiliaries Auxiliary switch Alarm switch Shunt trip Undervoltage trip External accessories Direct rotary handle Extended rotary handle Terminal shield Insulation barrier Rear connection Mechanical interlock Plug-in device Dimensions (mm) W H D Weight(kg) 2 pole 3 pole 4 pole A A A A fixed fixed fixed fixed mm

25 800 N-Type S-Type L-Type ABN802c ABS802c ABL802c ABN803c ABS803c ABL803c ABN804c ABS804c ABL804c 500, 630, 700, A A A fixed fixed fixed mm

26 Molded case circuit breakers Meta-MEC 30AF to 225AF Series Frame Size(AF) Frame Type Breaking capacity(ka), Icu at 415VAC Number of poles Type 2 pole 3 pole 4 pole Rated current (A) ABS ABH ABE ABS ABH , 3 2, 3 2, 3 2, 3, 4 2, 3, 4 ABS32b ABH32b ABE52b ABS52b ABH52b ABS33b ABH33b ABE53b ABS53b ABH53b ABS54b (3), 5, 10, 15, 20, 30 5, 10, 15, 20, 30 5, 10, 15, 20, 30, 40, 50 15, 20, 30, 40, 50 Technical data conforming to IEC/EN Rated operational voltage(v), Ue(50/60Hz) Rated operational voltage(v), Ue(DC) Rated insulation voltage(v), Ui(50/60Hz) Rated impulse withstand voltage(kv), Uimp Ultimate breaking capacity(ka), Icu AC 50/60Hz 220/240V 380V 415V 440/460V 480/500V 600V DC 125V 250V Service breaking capacity(%icu), Ics Category of use Endurance Mechanical (Number of operations) Electrical Type of trip unit Thermal-magnetic release Electronic release Pre-alarm via LED Hydraulic-magnetic release Magnetic release only without thermal trip Earth leakage protection for 3 pole Accessories Electrical auxiliaries External accessories Dimensions (W H Dmm) Weight(kg) Note): 1. applicable or available 2. available as a separate breaker 3. (3) Breaking capacity(at 415VAC) of ABS32b 3A ABS33b 3A is 2.5kA Derating chart : See tables Auxiliary switch Alarm switch Shunt trip Undervoltage trip Direct rotary handle Extended rotary handle Terminal shield Insulation barrier Rear connection Mechanical interlock Plug-in device Motor operator 3 pole breaker 2 pole 3 pole 4 pole A A A A A fixed fixed fixed fixed See table 1 Table 1. Amb. Temp Calibrated for 40 In=15 to 30A 111.9% 111.3% 110.0% 108.0% 106.6% 104.9% 102.7% 100.0% 96.8% 93.3% In=40 to 100A 110.2% 109.8% 108.7% 107.0% 105.8% 104.3% 102.4% 100.0% 97.2% 94.0% Calibrated for 50 In=15 to 30A 113.1% 112.5% 111.3% 110.0% 109.1% 108.0% 106.6% 104.9% 102.7% 100.0% In=40 to 100A 111.2% 110.7% 109.8% 108.7% 108.0% 107.0% 105.8% 104.3% 102.4% 100.0% fixed

27 ABE ABS ABE ABS ABH ABE ABS ABH , 3 2, 3, 4 2, 3, 4 2, 3, 4 2, 3, 4 2, 3, 4 2, 3, 4 2, 3, 4 ABE62b ABS62b ABE102b ABS102b ABH102b ABE202b ABS202b ABH202b ABE63b ABS63b ABE103b ABS103b ABH103b ABE203b ABS203b ABH203b ABH54b ABS64b ABE104b ABS104b ABH104b ABE204b ABS204b ABH204b 60 5, 10, 15, 20, 30, 15, 20, 30, 40, , 125, 150, 175, 200, , 50, 60, 60, 75, , 100 See table 1 See table 1 See table A A A A A A A A fixed fixed. fixed fixed. fixed fixed fixed fixed Table 2. Amb. Temp Calibrated for 40 In=100 to 225A 114.3% 113.2% 110.6% 107.5% 105.8% 140.0% 102.0% 100.0% 97.9% 95.6% Calibrated for 50 In=100 to 225A 116.3% 115.4% 113.2% 110.6% 109.1% 107.5% 105.8% 104.0% 102.0% 100.0% 27

28 Mold case circuit breakers Meta-MEC 250AF to 1600AF Series Frame Type Breaking capacity(ka), Icu at 415VAC Number of poles Type Rated current (A) Note ; applicable or available available as a separate breaker Frame Size(AF) pole 3 pole 4 pole Technical data conforming to IEC/EN Rated operational voltage(v), Ue(50/60Hz) Rated operational voltage(v), Ue(DC) Rated insulation voltage(v), Ui(50/60Hz) Rated impulse withstand voltage(kv), Uimp Ultimate breaking capacity(ka), Icu AC 50/60Hz 220/240V 380V 415V 440/460V 480/500V 600V DC 125V 250V Service breaking capacity(%icu), Ics Category of use Endurance Mechanical (Number of operations) Electrical Type of trip unit Thermal-magnetic release Electronic release Pre-alarm via LED Hydraulic-magnetic release Magnetic release only without thermal trip Earth leakage protection for 3 pole Accessories Electrical auxiliaries External accessories Dimensions (W H Dmm) Weight(kg) Derating chart : See tables Auxiliary switch Alarm switch Shunt trip Undervoltage trip Direct rotary handle Extended rotary handle Terminal shield Insulation barrier Rear connection Mechanical interlock Plug-in device Motor operator 3 pole breaker 2 pole 3 pole 4 pole ABE ABS ABH ABL ,3,4 2,3,4 2,3,4 2, 3, 4 ABE402b ABS402b ABH402b ABL402b ABE403b ABS403b ABH403b ABL403b ABE404b ABS404b ABH404b ABL404b 250, 300, 350, 400 Interchangeable via rating plug between 250 and and 400 See table /50(Ics) A A A A fixed fixed fixed fixed Table 3. Amb. Temp Calibrated for % 109.0% 107.0% 105.0% 104.0% 103.0% 101.5% 100.0% 98.5% 97.0% Calibrated for % 112.0% 110.0% 108.0% 107.0% 106.0% 104.5% 103.0% 101.5% 100.0% 28

29 ABE ABS ABL GBN(E) GBH(E) ABS ABS(electronic trip) GBN(E) , 3, 4 2, 3, 4 2, 3, , ABE802b ABS802b ABL802b ABE803b ABS803b ABL803b GBN803E GBH803E ABS1003 ABS1203 ABS1203E GBN1603E ABE804b ABS804b ABL804b ABS1004 ABS , 600, 630, 700, Interchangeable via rating plug between 500 and 600, 500 and 630, 700 and 800 Electronically adjustable : ( ) In Electronically adjustable : ( ) In See table /50(Ics) A A A A A A A A fixed fixed fixed Adjustable-thermal, Fixed-magnetic LSIA configuration LSIA configuration

30 Air circuit breakers Susol ACB Series Type Ampere frame (AF) Rated current(a) (In max) at 40 Setting current (A) * Control trip relay (... In max) Rated current of neutral pole (A) Rated insulation voltage(v) (Ui) Rated operating voltage(v) (Ue) Rated impulse withstand voltage (kv) (Uimp) Frequency(Hz) Number of poles (P) Rated breaking capacity (ka sym) 220V/230V/380V/415V IEC AC 50/60Hz (Icu) 460V/480V/500V KS C V/600V/ Rated service breaking capacity (ka) (Ics)... % Icu Rated making capacity (ka peak) 220V/230V/380V/415V IEC AC 50/60Hz (Icm) 460V/480V/500V KS C V/600V/ Rated short-time 1sec withstand current (ka) (Icw) 2 sec 3 sec Operating time (ms) Maximum total breaking time Maximum closing time Life cycle (time) Mechanical Without maintenance With maintenance Electrical Without maintenance With maintenance Connections ** Draw-out / Fixed Horizontal connection Vertical connection Front connection Mixed connection Weight (kg) Draw-out type Main body Motor charging type (3P/4P) (With cradle) Manual charging type Cradle only Fixed type Motor charging type Manual charging type External dimensions (mm) Draw-out 3P (H W D) type 4P Trip relay Certificate & Approval Marine classiflcation * Refer to trip relay specification. ** : Standard, : Option 30 H D W Fixed type 3P 4P AH-06D AH-08D AH-10D AH-13D AH-16D AH-20D (0.4 ~ 1.0) In max /60 3, % ,000 30,000 5,000 10, /74 70/85 61/72 68/83 29/32 33/40 34/44 38/47 32/42 36/ N, A, P, S type KS / KEMA / KERI / GOST LR, ABS, DNV, KR, BV, GL, RINA, NK

31 AH-06E AH-08E AH-10E AH-13E AH-16E AH-20E AH-25E AH-32E AH-40E AH-40G AH-50G AH-63G (0.4 ~ 1.0) In max (0.4 ~ 1.0) In max , /60 3, % ,000 20,000 5,000 10, / /147 85/ /145 44/55 58/70 44/55 63/100 42/53 61/ N, A, P, S type KS / KEMA / KERI / GOST LR, ABS, DNV, KR, BV, GL, RINA, NK 1, /60 3, % ,000 15,000 2,000 5, / / / /228 97/ /124 98/ /130 96/ / N, A, P, S type KS / KEMA / KERI / GOST LR, ABS, DNV, KR, BV, GL, RINA, NK 31

32 Air circuit breakers Metasol ACB Series Type Ampere frame (AF) Rated current(a) (In max) at 40 Setting current (A) * Control trip relay (... In max) Rated current of neutral pole (A) Rated insulation voltage(v) (Ui) Rated operating voltage(v) (Ue) Rated impulse withstand voltage (kv) (Uimp) Frequency (Hz) Number of poles (P) Rated breaking capacity (ka sym) (Icu) 220V/230V/380V/415V AC 50/60Hz IEC V/480V/500V 550V/600V/ Rated service breaking capacity (ka) (Ics)... % Icu Rated making capacity (ka peak) (Icm) 220V/230V/380V/415V AC 50/60Hz IEC V/480V/500V 550V/600V/ Rated short-time 1 sec withstand current (ka) (Icw) 2 sec 3 sec Operating time (ms) Maximum total breaking time Maximum closing time Life cycle (time) Mechanical Without maintenance With maintenance Electrical Without maintenance With maintenance Connections ** Draw-out / Fixed Horizontal connection Vertical connection Front connection Mixed connection Weight (kg) Draw-out type Main body Motor charging type (3P/4P) (With cradle) Manual charging type Cradle only Fixed type Motor charging type Manual charging type External dimensions (mm) Draw-out 3P (H W D) type 4P Trip relay Certificate & Approval Marine classiflcation * Refer to trip relay specification. ** : Standard, : Option 32 H D W Fixed type 3P 4P AN-06D AN-08D AN-10D AN-13D AN-16D AS-20D (0.4 ~ 1.0) In max /60 3, % 100% ,000 30,000 5,000 10, /74 70/85 61/72 68/83 29/32 33/40 34/44 38/47 32/42 36/ N, A, P type KS / KEMA / KERI / GOST LR, ABS, DNV, KR, BV, GL, RINA, NK

33 AS-20E AS-25E AS-32E AS-40E AS-50F AS-40G AS-50G AS-63G , , , 2000 (0.4 ~ 1.0) In max (0.4 ~ 1.0) In max (0.4 ~ 1.0) In max 630, , , , , /60 50/60 50/60 3, 4 3, 4 3, % 100% 100% ,000 10,000 10,000 20,000 15,000 15,000 5,000 2,000 2,000 10,000 5,000 5, / / / / /230 85/ / / / /228 44/50 58/70 78/90 97/ /124 44/55 63/100 76/94 98/ /130 42/53 61/98 74/92 96/ / N, A, P type N, A, P type N, A, P type KS / KEMA / KERI / GOST KS / KEMA / KERI / GOST KS / KEMA / KERI / GOST LR, ABS, DNV, KR, BV, GL, RINA, NK LR, ABS, DNV, KR, BV, GL, RINA, NK LR, ABS, DNV, KR, BV, GL, RINA, NK 33

34 Trip relay(ocr) The trip relay of Susol ACB provides the additional protection functions for voltage, frequency, unbalance, and others in addition to main protection functions for over current, short-circuit, ground fault. It supports the advanced measurement functions for voltage, current, power, electric energy, harmonics, communication function, and others. Analog trip function interlocked with mechanism enhanced a durability of devices as well as the breaking capacity of ACB. Zone selective interlocking function makes the protective coordination more simple and thermal memory can be applied to various loads.

35 Trip relay types Classification N type A type P type S type Externals Current L / S / I / G / Thermal L / S / I / G / Thermal L / S / I / G / Thermal(Continuous) P type protection ZSI(Protective coordination) ZSI(Protective coordination) Other protection Earth leakage (Option) Earth leakage(option) P type Over/Under current Over/Under frequency Unbalance(Voltage/Current) Reverse power Current (R / S / T / N) 3 Phase Voltage/Current 3 Phase Voltage/Current RMS/Vector Power(P, Q, S), PF(3-Phase) RMS/Vector Power(P, Q, S), PF(3-Phase) Energy(Positive/Negative) Energy(Positive/Negative) Measurement - Frequency, Demand Frequency, Demand function Fine adjustment Pre Trip Alarm Digital Output IDMTL setting Communication Fine adjustment for long/short time delay/instantaneous/ ground Overload protection relays : DO (Alarm) (Ground fault is not available when using Pre trip alarm) Voltage/Current harmonics (1st~63th) 3 Phase Waveforms THD, TDD, K-Factor P type P type 3DO (Fixed) 3DO (Programmable) P type L, S/I, G Alarm - Trip, Alarm, General Compliance with IEC SIT, VIT, EIT, DT P type Modbus/RS-485 Modbus / RS-485 Modbus / RS-485 Profibus-DP Profibus-DP Profibus-DP Self Power Self Power AC/DC 100~250V AC/DC 100~250V -Power source - Power source works DC 24~60V DC 24~60V works over 20% of over 20% of load current. Power supply load current. - External power source are required for comm. AC/DC 100~250V DC 24~60V RTC timer Available Available Available Available LED for trip info. Long time delay N type N type N type Short time delay/instantaneous Ground fault 10records 256records 256records Fault recording - (Fault/Current/Date and Time) (Fault/Current/Date and Time) Last fault wave recording (3 Phase) Event recording records(content, Status, Date) P type Operating Reset button Reset, Menu A type A type button Up/Down, Left/Right, Enter Basic protection function(l / S / I / G) is still under normal operation without control power. 35

36 Vacuum Circuit Breakers Susol VCB Series Rated voltage (kv) Rated short-circuit breaking current (ka) Rated current (A) Rated frequency (Hz) 50/60 50/60 Rated short-circuit breaking capacity (MVA) Rated short-time withstand current (ka/3sec) Rated short-circuit making current (ka) Rated breaking time (Cycle) 3 3 Rated opening time (sec) No-load closing time (sec) Rated withstand Power frequency (kv/min) 20 28(42) voltage Impulse (kv/1.2x50μs) Rated operating sequence O-0.3s-CO-3min-CO O-0.3s-CO-3min-CO Type test Mechanical M2 M2 Electrical E2 (List1) E2 (List1) Capacitive current switching C2 C2 Lifetime Mechanical Without maintenance (time) Maintenance (time) Electrical Without maintenance (time) Maintenance (time) Installing Fixed method Draw-out Applied standard IEC JIS C 4603/JEC 2300 IEC Rated voltage (kv) Rated short-circuit breaking current (ka) Rated current (A) * * 1250* * * * 2500 Rated frequency (Hz) 50/60 50/60 50/60 50/60 Rated short-circuit breaking capacity (MVA) Rated short-time withstand current (ka/3sec) Rated short-circuit making current (ka) Rated breaking time (Cycle) Rated opening time (sec) No-load closing time (sec) Rated withstand Power frequency (kv/min) 38 50(65) 70(95) 95 voltage Impulse (kv/1.2x50μs) Rated operating sequence O-0.3s-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-3min-CO Type test Mechanical M2 M2 M2 M2 Electrical E2 (List1) E2 (List1) E2 (List1) E2 (List1) Capacitive current switching C2 C2 C2 C2 Lifetime Mechanical Without maintenance (time) Maintenance (time) Electrical Without maintenance (time) Maintenance (time) Installing Fixed method Draw-out Applied standard IEC IEC JEC 2300 IEC JEC 2300 GB

37 Accessories Dimensions Main Cradle Secondary trip coil Under voltage trip release Current trip coil Position S/W Keylock Button padlock Button cover Mechanical position indicator Mechanical position indicator Secondary trip coil Under voltage trip release Current trip coil Position S/W Keylock Button padlock Button cover Plug interlock Mechanical position indicator Earthing S/W Earthing with electromechanical interlock Earthing S/W with position S/W Earthing S/W with keylock Door interlock MOC TOC Shutter padlock Emergency mechanical trip device Secondary trip coil Under voltage trip release Current trip coil Position S/W Keylock Button padlock Button cover Plug interlock Mechanical position indicator Earthing S/W Earthing with electromechanical interlock Earthing S/W with position S/W Earthing S/W with keylock Door interlock MOC TOC Shutter padlock Emergency mechanical trip device Variouse type of Cradle E type No Shutter For MESG F type Insulation Shutter For MESG G type Bushing Insulation Shutter For MESG H type Bushing Metal Insulation Shutter Closed Compartment structure Earthing Switch & Interlock For MCSG Door Interlock 37

38 Memo 38

39

40 For your safety, please read user's manual thoroughly before operating. Contact the nearest authorized service facility for examination, repair, or adjustment. Safety Instructions Please contact qualified service technician when you need maintenance. Do not disassemble or repair by yourself! Any maintenance and inspection shall be performed by the personnel having expertise concerned. c LS Industrial Systems Co.,Ltd. All rights reserved. HEAD OFFICE LS Tower, Hokyeh 1dong, Dongan-gu, Anyang, Kyonggi-Do, , Korea Tel. (82-2) , 4873, 4918, 4148 Fax. (82-2) CHEONG-JU PLANT Cheong-Ju Plant #1, Song Jung Dong, Hung Duk Ku, Cheong Ju, , Korea Specifications in this catalog are subject to change without notice due to continuous product development and improvement. Global Network LS Industrial Systems (Middle East) FZE Dubai, U.A.E. Address: LOB 19 JAFZA VIEW TOWER Room 205, Jebel Ali Freezone P.O. Box , Dubai, United Arab Emirates Tel: Fax: hwyim@lsis.biz Dalian LS Industrial Systems Co., Ltd. Dalian, China Address: No.15, Liaohexi 3-Road, Economic and Technical Development zone, Dalian , China Tel: Fax: lixk@lsis.com.cn LS Industrial Systems (Wuxi) Co., Ltd. Wuxi, China Address: 102-A, National High & New Tech Industrial Development Area, Wuxi, Jiangsu, , P.R.China Tel: Fax: xuhg@lsis.com.cn LS-VINA Industrial Systems Co., Ltd. Hanoi, Vietnam Address: Nguyen Khe - Dong Anh - Ha Noi - Viet Nam Tel: Fax: srjo@lsisvina.com LS-VINA Industrial Systems Co., Ltd. Hochiminh, Vietnam Address: 41 Nguyen Thi Minh Khai Str. Yoco Bldg 4th Floor, Hochiminh City, Vietnam Tel: Fax: sbpark@lsisvina.com LS Industrial Systems Tokyo Office Tokyo, Japan Address: 16FL, Higashi-Kan, Akasaka Twin Tower 17-22, 2-chome, Akasaka, Minato-ku Tokyo , Japan Tel: Fax: jschuna@lsis.biz LS Industrial Systems Shanghai Office Shanghai, China Address: Room E-G, 12th Floor Huamin Empire Plaza, No.726, West Yan'an Road Shanghai , P.R. China Tel: (609) Fax: jinhk@lsis.com.cn LS Industrial Systems Beijing Office Beijing, China Address: B-Tower 17FL.Beijing Global Trade Center B/D. No.36, BeiSanHuanDong-Lu, DongCheng-District, Beijing , P.R. China Tel: ,7 Fax: cuixiaorong@lsis.com.cn LS Industrial Systems Guangzhou Office Guangzhou, China Address: Room 1403,14F,New Poly Tower,2 Zhongshan Liu Road,Guangzhou, P.R. China Tel: Fax: linsz@lsis.biz LS Industrial Systems Chengdu Office Chengdu, China Address: Room Floor, huanminhanjun internationnal Building, No1 Fuxing Road Chengdu, , P.R. China Tel: Fax: yangcf@lsis.com.cn LS Industrial Systems Qingdao Office Qingdao, China Address: 7B40,Haixin Guangchang Shenye Building B, No.9, Shandong Road Qingdao 26600, P.R. China Tel: Fax: lirj@lsis.com.cn LOW VOLTAGE CIRCUIT BREAKERS & CONTACTORS(E) /(23) Printed in Korea STAFF