HIGH VISCOSITY DRUM PUMPS

Size: px

Start display at page:

Download "HIGH VISCOSITY DRUM PUMPS"

Meryl Nichols
6 years ago
Views:

HIGH DRUM UMS BULLETIN MAY 2005 SR 800 Sanitary INDUSTRIAL & SANITARY UM SERIES Flows to 17 GM / 64 LM Max 174 psi / 12 bar Rugged construction All 316 stainless steel Choice of stater elastomers

SERFILCO rogressive Cavity pumps are engineered to transfer high viscosity materials from drums, tanks and IBC s.

The series 700 (Industrial) and series 800 (Sanitary) pumps can transfer materials ranging in viscosity up to 100,000 cps/ mas.

Series 700 Industrial ump SERFILCO series 700 Industrial umps are commonly used throughout the industrial marketplace for transferring viscous materials such as polymers, paints, resins, adhesives

1 HIGH DRUM UMS BULLETIN MAY 2005 SR 800 Sanitary INDUSTRIAL & SANITARY UM SERIES Flows to 17 GM / 64 LM Max 174 psi / 12 bar Rugged construction All 316 stainless steel Choice of stater elastomers Industrial Series 700 or Sanitary Series 800 Speed Reduced pump (SR) Max viscosity 25,000 cps/mas Direct Drive pump (DD) Max viscosity 100,000 cps/mas DD 800 Industrial rogressive Cavity Design SERFILCO rogressive Cavity pumps are engineered to transfer high viscosity materials from drums, tanks and IBC s. Utilizing the principle of positive displacement, these pumps deliver a continuous flow with little product degradation. The series 700 (Industrial) and series 800 (Sanitary) pumps can transfer materials ranging in viscosity up to 100,000 cps/ mas. All pumps are constructed from robust 316SS with a choice of stator elastomers. Series 700 Industrial ump SERFILCO series 700 Industrial umps are commonly used throughout the industrial marketplace for transferring viscous materials such as polymers, paints, resins, adhesives and petroleum based products. Series 800 Sanitary ump SERFILCO series 800 Sanitary umps are commonly used throughout the sanitary food processing, pharmaceutical, biotechnology, and cosmetic industries. Applications include the transfer of tomato paste, mayonnaise, pie fillings, salad dressing, shampoos, and cosmetic lotions. The series 800 pumps are manufactured according to standards with FDA ap- proved materials of construction. The pumps utilize a threaded design and tri-clamp fittings for quick cleaning, inspection and maintenance. AINTS HARMACEUTICAL COSMETICS ETROLEUM

2 SR - SEED REDUCED UMS age 2 Technical Data Max. Viscosity: 25,000cps (mas) Discharge ort: Wetted Material: Mechanical Seal: Motor Drives: Fittings: 1.5 / 38mm hose barb, optional 1.25 / 32mm Tube & Rotor Assembly: 316 Stainless Steel Stator Material: See below SiC/Viton/SiC OD450, OD-S, ENC-S, EX-UL, AIR(F) Large Type Acme Thread design enables quick disassembly for cleaning and maintenance. SR 700 Industrial ump Series Easy Maintenance Threaded Components Interchangeable Motors Drives Continuous Flow Low Shearing roperties NUMBER SR * SR * SR * SR * SR * SR * SR * SR * SR * * * * * * * * * * FLOW RATE** MAX RESSURE 7 GM 87 SI 7 GM 174 SI 17 GM 87 SI * Add to Model No. and rice Code No. ** Based on water B for Buna-N T for TFE V for Viton UM LENGTH SR 800 Sanitary Series Hygienic Design Easy to Clean & Maintain NUMBER SR * SR * SR * SR * SR * SR * SR * SR * SR * * * * * * * * * * Gentle roduct Treatment Continuous Flow FLOW RATE** MAX RESSURE 7 GM 87 SI 7 GM 174 SI 17 GM 87 SI * Add to Model No. and rice Code No. ** Based on water FG for food grade Buna T for TFE UM LENGTH Warning: When pumping fl ammable or combustible liquids pump tube must be used in conjunction with an explosion proof motor

SR 700 & SR 800 UM MOTORS age 3 OD450 OD 450 OEN DRI-ROOF MOTOR 0.6 H (450 watts). Drip proof motor in rugged glass reinforced plastic housing. Engineered for in corrosive environments.

3 SR 700 & SR 800 UM MOTORS age 3 OD450 OD 450 OEN DRI-ROOF MOTOR 0.6 H (450 watts). Drip proof motor in rugged glass reinforced plastic housing. Engineered for in corrosive environments. Includes 16 ft cord w/molded plug. Weight: 5.5 lbs. (2.5 kg.) NO. OD OD MOTOR VOLTAGE 115V/1/ V/1/50-60 Warning: Not suitable for pumping flammable or combustible liquids OD-S OD-S OEN DRI-ROOF MOTOR w/speed control 1.1 H (825 watts). Drip-proof motor in rugged glass reinforced plastic housing. Speed control knob allows for efficient, controlled liquid dispensing. ON/OFF switch conveniently located for single hand, thumb control. Resettable thermal overload protected, double insulated motor. Cartridge brush design extends life and greatly reduces replacement service time. Includes 16 ft. cord w/molded plug. Weight: 8.8 lbs. (4 kg.) MOTOR NO. OD-S-115 OD-S MOTOR VOLTAGE 115V/1/ V/1/50-60 Warning: Not suitable for pumping flammable or combustible liquids ENC-S ENC-S SEVERE DUTY TOTALLY ENCLOSED MOTOR w/speed control 1.1 H (825 watts). Totally enclosed motor in anodized aluminum housing for extra protection. Speed control knob allows for efficient, controlled liquid dispensing. ON/OFF switch conveniently located for single hand, thumb control. Resettable thermal overload protected, double insulated motor. Cartridge brush design extends life and greatly reduces replacement service time. Includes 16 ft. cord w/molded plug. Weight: 12 lbs. (6 kg.) NO. MOTOR VOLTAGE ENC-S-115 ENC-S V/1/ V/1/50-60 Warning: Not suitable for pumping flammable or combustible liquids EX-UL SERFILCO AIR (F) EX-UL EXLOSION-ROOF MOTOR.83 H (620 watts)**. Explosion-proof motor in aluminum housing. C.S.A. and U.L. listed Class I, Groups C and D. Thermal overload protected, automatic reset. Includes 16 ft. cord, no plug. Weight: 20 lbs. (9.5 kg.) NO. MOTOR VOLTAGE AIR (F) AIR DRIVEN MOTOR EXC-UL-115 EX5-240* *rotection class (TB): EE x de 11C T6 ** 620 watt input / 430 watt output May be used for pumping flammable or combustible liquids 115V/1/ V/1/50.73 H (550 watts), 28 cu. 90 SI, 10,000 RM. Aluminum motor housing is plastisol coated to prevent sparking. Includes muffler, filter, and trigger valve for flow control. Air line filter, SI regulator and automatic oiler recommended. Weight: 3.5 lbs. (1.6 kg.) NO. AIR (F) Warning: Not suitable for pumping flammable or combustible liquids WARNING: umping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFA 30 - NFA77. rior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump when pumping flammables. Air motors are not recognized under any current Underwriter s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

4 DD - DIRECT DRIVE UMS age 4 Technical Data Design: rogressive Cavity / ositive Displacement Max. Viscosity: Discharge ort: Wetted Material: Mechanical Seal: Motor Drives: Fittings: 100,000cps (mas) 1.5 / 38mm hose barb, optional 1.25 / 32mm Tube & Rotor Assembly: 316 Stainless Steel Stator Material: See below SiC/Viton/SiC neumatic or electric; B phase / Hz See page 4 for motor selection. Large Type Acme Thread design enables quick disassembly for cleaning and maintenance. DD 700 Industrial ump Series Easy Maintenance Threaded Components Interchangeable Motors Drives NUMBER DD * DD * DD * DD * DD * DD * DD * DD * DD * * * * * * * * * * Continuous Flow Low Shearing roperties FLOW RATE** MAX RESSURE 7 GM 87 SI 7 GM 174 SI 17 GM 87 SI * Add to Model No. and rice Code No. ** Based on water B for Buna-N T for TFE V for Viton UM LENGTH DD 800 Sanitary Series Hygienic Design Easy to Clean & Maintain NUMBER DD * DD * DD * DD * DD * DD * DD * DD * DD * * * * * * * * * * Gentle roduct Treatment Continuous Flow FLOW RATE** MAX RESSURE 7 GM 87 SI 7 GM 174 SI 17 GM 87 SI * Add to Model No. and rice Code No. ** Based on water FG for good grade Buna T for TFE UM LENGTH Warning: When pumping fl ammable or combustible liquids pump tube must be used in conjunction with an explosion proof motor

5 DD700 & DD800 UM MOTORS age 5 Industrial Electric Motor Industrial Electric Motors v/3/50-60Hz RM ENCLOSURE SHIING WT. LBS (Kg) DD , TEFC (I55) 40 (18) DD , TEFC (I55) 52 (24) DD , TEFC (I55) 58 (25) Sanitary Electric Motor Sanitary Electric Motors v/3/50-60Hz RM ENCLOSURE (WASHDOWN) SHIING WT. LBS (Kg) DD , TEFC (I55) 40 (18) DD , TEFC (I55) 52 (24) DD , TEFC (I55) 58 (25) Industrial neumatic Motors Industrial neumatic Motor RM DD-A , DD-A , DD-A , AIR CONSUMTION psi 37 7 Bar psi 65 7 Bar psi 80 7 Bar SHIING WT. LBS (Kg) 12 (5) 24 (11) 26 (12) Sanitary neumatic Motors Sanitary neumatic Motor RM DD-A4F , DD-A6F , DD-A8F , AIR CONSUMTION psi 37 7 Bar psi 65 7 Bar psi 80 7 Bar SHIING WT. LBS (Kg) 12 (5) 24 (11) 26 (12) NOTE: Optimal pneumatic motor speed is RM

6 ERFORMANCE S age RM 50 Hz Operation 900 RM 60 Hz Operation & neumatic Motors SI ( BAR ) 71 Series umps 90 (6) 70 (4) 50 (3) 40 (2) 30 (1.5) 20 (1) 10 (.5) 0 1 (4) 2 (8) 3 (11) 4 (15) 5 (19) 6 (23) SI ( BAR ) 71 Series umps 90 (6) 70 (4) 50 (3) 40 (2) 30 (1.5) 20 (1) 10 (.5) 0 1 (4) 2(8) 3 (11) 4 (15) 5 (19) 6 (23) 7 (26) 8 (30) D 30, ,2 D 30, ,2 SI ( BAR ) 180 (12.5) 160 (11) 140 (9.5) 120 (8) 100 (7) 40 (3) 20 (1.5) 72 Series umps 72 Series umps 0 1 (4) 2 (8) 3 (11) 4(15) 5 (19) 6 (23) SI ( BAR ) 180 (12.5) 160 (11) 140 (9.5) 120 (8) 100 (7) 40 (3) 20 (1.5) 0 1 (4) 2(8) 3 (11) 4 (15) 5 (19) 6 (23) 7 (26) 8 (30) D 30, ,2 D 30, ,2 SI ( BAR ) 90 (6) 70 (4) 50 (3) 40 (2) 30 (1.5) 20 (1) 10 (.5) 181 Series umps 181 Series umps 0 2 (8) 4(15) 6 (23) 8 (30) 10 (38) 12 (45) 14 (53) SI ( BAR ) 90 (6) 70 (4) 50 (3) 40 (2) 30 (1.5) 20 (1) 10 (.5) 0 2 (8) 4 (15) 6 (23) 8 (30) 10 (38) 12 (45) 14 (53) 16 (61) 17(64) 18 (68) NOTE: Accuracy Dof performance 30,000+ curves may 1.5vary +/- 1,2 10% based on specific applications. D 30, ,2

7 DRUM UM ACCESSORIES age 7 HOSE & CLAMS NYLON REINFORCED HOSE-CLEAR rice Code 1 1 /2 I.D. - per fo WIRE REINFORCED HOSE 1 1 /2 I.D. - per fo HIGH RESSURE TRANSFER HOSE Tube: Black, oil resistant synthetic rubber. (Nitrile). Reinforcement: One braid of high tensile steel wire. Cover: Black, oil and abrasion resistant synthetic rubber. Max. working p 725 psi. Max. temp. 180 o F 1 1 /2 I.D. - per fo LICORD GRAY FOOD TRANSFER HOSE Construction: White Chemivic synthetic rubber (FDA/USDA, 3A Sanitary Standard complaint). Cover: Spiral-plied synthetic fabric with Galvanized Wire helix. Max. working p 150 psi. Max. temp. 180 o F 1 1 /2 I.D. - per fo VINTNER FOOD TRANSFER HOSE (High ) For handling in-plant and/or tank truck transfer of wine, beer, potable water and other nonoily, liquid foodstuffs. Construction: White Chlorobutyle (FDA/USDA, 3A Sanitary Standard compliant). Cover: Grey Versigard synthetic rubber. Max. working p 250 psi. Max. temp. 220 o F 11/2 I.D. - per foot DISCHARGE HOSE CLAM Malleable iron two bolt clamp. Gripping ridges, reinforced lugs. Hose size from 1-48/64 to 2-3/64 (44.50 mm to 27 mm) UM HANGER For DD direct drive pumps constructed of 304SS tubing. rice Code No AIR FILTER REGULATOR/LUBRICATOR To protect all air driven motors, with polycarbonate bowl & p gauge (200 psi), 3/8 NT. rice Code No licord ; Chemivic Vitner & Versigard are registered trademarks of The Goodyear Tire & Rubber Company

SERFILCO offers a complete product line of pumps for fast, safe

SERFILCO Smart Drum ump Batch and fl ow control systems.

SERFILCO Barrel and Container umps SERFILCO Series H Hand

O.B. Northbrook, Illinois 2900 MacArthur Blvd.

8 SERFILCO offers a complete product line of pumps for fast, safe and convenient transfer and dispensing of liquids. SERFILCO Smart Drum ump Batch and fl ow control systems. SERFILCO High Viscosity Drum umps SERFILCO Series D Drum umps SERFILCO Barrel and Container umps SERFILCO Series H Hand Dispensing ump Specifications subject to change without notice. F.O.B. Northbrook, Illinois 2900 MacArthur Blvd Northbrook, IL U.S.A sales@serfilco.com FAX:

1. Before operating the pump, read and understand these operating instructions.

1. Before operating the pump, read and understand these operating instructions. Standard Pump Description Standard s Drum Pumps are designed to transfer a variety of materials from 55 gallon drums and tanks. Standard Pump offers several different pumps, each designed for specific