Drum Pump Motors SP-280P Series

Transcription

1 Drum Pump Motors SP-280P Series Enclosure:...Open Drip Proof (IP44) Available Voltage:...SP-280P & SP-280P-V : 110V...SP-280P-2, SP-280P-2-V, SP-280P-2-NL & SP-280P-2-VNL : 220V Horsepower (Watts): (825) Amps: (varies by voltage) Insulation Class:...F2 Certification:...ETL (110V) or CE (220V) Housing Material:...Thermoplastic Polyester Resin Power Cord Length:...16 ft. (4,8 m) Power Cord Plug Type:...NEMA 5-15-P (110V) or CEE 7/7 (220V) Noise Level:...84 dba Low Voltage Release:...SP-280P-2 & SP-280P-2-V : Yes...SP-280P, SP-280P-V, SP-280P-2NL & SP-280P-2-VNL : No Thermal Overload:...Yes Variable Speed:...SP-280P-V, SP-280P-2-V, & SP-280P-2-VNL : Yes...SP-280P, SP-280P-2 & SP-280P-2NL : No Weight:...10 lbs (4,5 kg) WARNING: Not suitable for pumping flammable or combustible liquids or use in a hazardous duty environment. DATA-280P-05-17

2 Drum Pump Motors SP-ENC Series Enclosure:...TEFC (IP54) Available Voltage:...SP-ENC & SP-ENC-V : 110V...SP-ENC-2, SP-ENC-2-V, SP-ENC-2NL & SP-ENC-2-VNL : 220V Horsepower (Watts): (825) Amps: (varies by voltage) Insulation Class:...F2 Certification:...ETL (110V) or CE (220V) Housing Material:...Anodized Aluminum Power Cord Length:...16 ft. (4,8 m) Power Cord Plug Type:...NEMA 5-15-P (110V) or CEE 7/7 (220V) Noise Level:...88 dba Low Voltage Release:...SP-ENC-2 & SP-ENC-2-V : Yes...SP-ENC, SP-ENC-V, SP-ENC-2NL & SP-ENC-2-VNL : No Thermal Overload:...Yes Variable Speed:...SP-ENC-V, SP-ENC-2-V, & SP-ENC-2-VNL : Yes...SP-ENC, SP-ENC-2 & SP-ENC-2NL : No Weight:...13 lbs (5,9 kg) WARNING: Not suitable for pumping flammable or combustible liquids or use in a hazardous duty environment. DATA-ENC-05-17

3 Drum Pump Motors SP-400 Series Enclosure:...Explosion Proof (IP54) II 2G Ex d IIA T4 Available Voltage:...SP-410EX : 110V...SP-420EX : 220V Horsepower (Watts):...SP-410EX : 0.3 (230)...SP-420EX : 0.8 (600) Amps: (varies by voltage) Certification:...SP-410EX : CSA Class I, Div. I, Group D, Insulation Class B, Temp Code T3C...SP-420EX : Atex II 2G Ex d IIA T4 Housing Material:...Aluminum (Inner Housing) / Nylon (Outer Shell) Power Cord Length:...12 ft. (3,7 m) Power Cord Plug:...Not Provided Noise Level:...80 dba Thermal Overload:...No Variable Speed:...No Weight:...17 lbs (7,7 kg) NOTE: Explosion proof motor regulations require that motors be returned to the manufacturer for repair. WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump when pumping flammables. Air motors are not recognized under any current Underwriter s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables. DATA

4 Drum Pump Motors SP-A1 Power Type:...Pneumatic Horsepower (Watts): (370) Air Consumption:...27 CFM (13 80 psi (5.51 bar) Air Inlet / Exhaust Size:...1/8" npt(f) / 1/8" npt(f) Certification:...Atex II 2 G c IIB T4 Housing Material:...Cast Steel Adapter Material:...Nylon Noise Level:...78 dba Lubrication Required:...Yes, Daily Weight: lbs (1,2 kg) II 2 G c IIB T4 WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump when pumping flammables. Air motors are not recognized under any current Underwriter s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables. DATA-A

5 Drum Pump Motors SP-A2 Series Power Type:...Pneumatic Horsepower (Watts): (560) Air Consumption:...28 CFM ( psi (6,8 bar) Air Inlet / Exhaust Size:...1/4" npt(f) / 3/8" npt(f) Trigger Lock:...SP-A2 : No...SP-A2TL : Yes Housing / Adapter Material:...Aluminum Noise Level:...87 dba Lubrication Required:...Yes, Daily Weight: lbs (1.5 kg) WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump when pumping flammables. Air motors are not recognized under any current Underwriter s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables. DATA-A