Square Inline Fans with Multi-Directional Discharge

Transcription

1 SQN

2 Square Inline Fans with Multi-Directional Discharge Page Introduction Standard Construction Features Specifications and Dimension Data SQN-D SQN-B SQN-HP Accessories Optional Side Discharge Typical Side Discharge Applications Performance Data SQN-D SQND-EC SQN-B SQN-B / SQN-HP Sound Data SQND SQND-EC SQN-B / SQN-HP Other Available Products

3 INTRODUCTION Cook s SQN - Square Inline Fan - is the most versatile fan in the industry. The SQN has the shortest depth of any available square inline fan. Standard universal mounting feet allows the customer to have total control of the fan s installation without the need to purchase any mounting accessories. Three access doors allow total access to the fans internal components in any vertical or horizontal mounting installation. By utilizing the side discharge options, installation costs, pressure loss, system effect and space requirements are reduced. (Side discharge options are illustrated on page 1) The SQN-B, SQN-HP, SQN-D, and SQND-EC are licensed to bear the AMCA Certified Ratings Seal for Air and Sound Performance. SQN-B/SQN-D Available in 7 direct drive sizes and 18 belt drive sizes. Capacities range from 1 to 26, CFM, with static pressures from to 2-1/2 inches. SQN-HP Available in 13 belt drive sizes. Capacities range from 1 to 22, CFM, with static pressures from 1/4 to 5 inches. SQND-EC SQND s with electronically commutated (EC) motors are available in 5 sizes with capacities from 1 to 26 CFM. SQN-B / SQN-HP SQN-D 2

4 STANDARD CONSTRUCTION FEATURES SQN-B Aluminum Wheel Lifting Lugs Integral Inlet & Duct Collars (3) Access Doors Regreasable Pillowblock Bearings in Cast Iron Housing SQN-D Field Wiring Compartment Lifting Lugs Aluminum Wheel Enclosed Motor Standard on Sizes 7-1 Motor Enclosure Standard on Sizes

5 SQN-D Specifications and Dimension Data Direct Drive Loren Cook Company certifies that the SQN-D and SQND-EC shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program. Description - Fan shall be duct mounted, direct driven centrifugal square inline. Certifications - Fan shall be listed by Underwriters Laboratories (UL 75) and UL listed for Canada (CSA Standard M1984). Fan shall bear the AMCA Certified Ratings Seal for Sound and Air Performance. Construction - The fan shall be of bolted construction utilizing corrosion resistant fasteners. Housing shall be minimum 18 gauge galvanized steel with integral duct collars. Bolted access doors shall be provided on three sides, sealed with closed cell neoprene gasketing. Housing shall be pre-drilled to accommodate universal mounting feet for vertical or horizontal installation. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM and static pressure. Unit shall be shipped in ISTA Certified Transit Tested Packaging. Wheel - Wheel shall be centrifugal backward inclined, constructed of 1 percent aluminum, including a precision machined cast aluminum hub. An aerodynamic aluminum inlet cone shall be provided for maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 24-5, Balance Quality and Vibration Levels for Fans. Motor - Motor shall be heavy duty type with permanently lubricated sealed bearings and furnished at the specified voltage, phase and enclosure. Motor (SQN-D) - Motor shall be NEMA design B with a minimum of class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure. Motor (SQND-EC) - Motor shall be an electronically commutated motor rated for continuous duty and furnished either with internally mounted potentiometer speed controller or with leads for connection to -1 VDC external controller. Product - Fan shall be model SQN-D or SQND-EC as manufactured by Loren Cook Company of Springfield, Missouri. Type SQN-D and SQND-EC is furnished standard with UL 75 Listing (Power Ventilator/ ZACT) when furnished with factory supplied motor. A OD D Sq. A OD E Type SQN-D and SQND-EC is furnished standard with C UL Listing (Power Ventilator) when furnished with factory supplied motor. A OD Inlet View B C A OD Discharge View SQN-D Dimension Data Size A B C D Sq. E Inlet and Rear Discharge Duct Size (ID) Optional Side Discharge Duct Size (WxH) (ID) Approx. Ship Wt.* /16 1 sq. 6-1/8 x 6-15/ /16 12 sq. 9-1/8 x 8-15/ /16 12 sq. 14-1/8 x 8-15/ / sq. 14-1/8 x 12-9/ /4 22-1/4 2-3/4 22-5/16 18 sq. 14-1/4 x 13-1/ /8 23-7/ /16 2 sq /16 x 16-1/ / /8 22 sq. 19-1/8 x 18-1/8 2 All dimensions in inches. *Weights in lbs, including motor. 4

6 Specifications and Dimension Data SQN-B Description - Fan shall be duct mounted, belt driven centrifugal square inline. Certifications - Fan shall be listed by Underwriters Laboratories (UL 75) and UL listed for Canada (CSA Standard M1984). Fan shall bear the AMCA Certified Ratings Seal for Sound and Air Performance. Construction - The fan shall be of bolted construction utilizing corrosion resistant fasteners. Housing shall be minimum 18 gauge galvanized steel with integral duct collars. Bolted access doors shall be provided on three sides, sealed with closed cell neoprene gasketing. Pivoting motor plate shall utilize threaded L-bolt design for positive belt tensioning. Housing shall be pre-drilled to accommodate universal mounting feet for vertical or horizontal installation. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM, static pressure and maximum fan RPM. Unit shall be shipped in ISTA Certified Transit Tested Packaging. Wheel - Wheel shall be centrifugal backward inclined, constructed of 1% aluminum, including a precision machined cast aluminum hub. Wheel inlet shall overlap an aerodynamic aluminum inlet cone to provide maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 24-5, Balance Quality and Vibration Levels for Fans. Motor - Motor shall be NEMA design B with class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure. Bearings - Bearings shall be designed and individually tested specifically for use in air handling applications. Construction shall be heavy duty regreasable ball type in a pillowblock cast iron housing selected for a minimum L5 life in excess of 2, hours at maximum cataloged operating speed. Belts and Drives - Belts shall be oil and heat resistant, static conducting. Drives shall be precision machined cast iron type, keyed and securely attached to the wheel and motor shafts. Drives shall be sized for 15% of the installed motor horsepower. The variable pitch motor drive must be factory set to the specified fan RPM. Product - Fan shall be model SQN-B as manufactured by Loren Cook Company of Springfield, Missouri. Belt Drive Loren Cook Company certifies that the SQN-B shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program. Type SQN-B is furnished standard with UL 75 Listing (Power Ventilator/ZACT) when furnished with factory supplied motor. Type SQN-B is furnished standard with C UL Listing (Power Ventilator) when furnished with factory supplied motor. SQN-B Dimension Data Size A B C D Sq. E Inlet and Rear Discharge Duct Size (ID) Optional Side Discharge Duct Size (WxH) (ID) Max. Mtr. Frame Size Approx. Ship Wt.* /2 12 sq. 14-1/8 x 8-15/16 143T /2 12 sq. 14-1/8 x 8-15/16 143T /2 12 sq. 14-1/8 x 8-15/16 143T /2 12 sq. 14-1/8 x 8-15/16 143T / /2 16 sq. 14-1/8 x 12-9/16 145T /4 22-1/4 2-3/4 12-1/2 18 sq. 14-1/4 x 13-1/8 145T /8 23-7/ /4 2 sq /16 x 16-1/8 145T / /4 22 sq. 19-1/8 x 18-1/8 182T /8 14-3/4 24 sq. 21 x 2-1/8 182T /4 32-1/ / sq. 23-1/4 x 22-1/8 182T / sq. 24-1/2 x 24-1/8 182T /4 37-1/4 33-1/2 15-1/4 3 sq. 26-3/4 x 26-1/8 184T /4 33 sq. 26-1/16 x 29-1/8 213T / /2 41-1/ / /4 36-7/16 sq /16 x 32-1/2 213T /4 4 sq. 3-1/8 x 36-1/8 213T /4 45-3/4 48-7/ /4 44 sq. 31-3/16 x 4-1/8 215T /4 46 sq. 32-3/16 x 42-1/16 215T /4 46-1/4 5-1/4 55-1/8 17-1/4 5-3/4 sq. 36-5/16 x 46-15/16 215T 65 All dimensions in inches. *Weights in Lbs, Less Motor and Drives. 5

7 SQN-HP Specifications and Dimension Data Belt Drive High Pressure Loren Cook Company certifies that the SQN-HP shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program. Type SQN-HP is furnished standard with UL 75 Listing (Power Ventilator/ZACT) when furnished with factory supplied motor. Description - Fan shall be duct mounted, belt driven, high pressure centrifugal square inline. Certifications - Fan shall be listed by Underwriters Laboratories (UL 75) and UL listed for Canada (CSA Standard M1984). Fan shall bear the AMCA Certified Ratings Seal for Sound and Air Performance. Construction - The fan shall be of bolted construction utilizing corrosion resistant fasteners. Housing shall be minimum 18 gauge galvanized steel with integral duct collars. Bolted access doors shall be provided on three sides, sealed with closed cell neoprene gasketing. Pivoting motor plate shall utilize threaded L-bolt design for positive belt tensioning. Housing shall be pre-drilled to accommodate universal mounting feet for vertical or horizontal installation. Unit shall bear an engraved aluminum nameplate. Nameplate shall indicate design CFM, static pressure and maximum fan RPM. Unit shall be shipped in ISTA Certified Transit Tested Packaging. Wheel - Wheel shall be high pressure centrifugal backward inclined, constructed of 1% aluminum, including a precision machined cast aluminum hub. Wheel inlet shall overlap an aerodynamic aluminum inlet cone to provide maximum performance and efficiency. Wheel shall be balanced in accordance with AMCA Standard 24-5, Balance Quality and Vibration Levels for Fans. Motor - Motor shall be Nema design B with class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure. Bearings - Bearings shall be designed and individually tested specifically for use in air handling applications. Construction shall be heavy duty regreasable ball type in a pillowblock cast iron housing selected for a minimum L5 life in excess of 2, hours at maximum cataloged operating speed. Belts and Drives - Belts shall be oil and heat resistant, static conducting. Drives shall be precision machined cast iron type, keyed and securely attached to the wheel and motor shafts. Drives shall be sized for 15% of the installed motor horsepower. The variable pitch motor drive must be factory set to the specified fan RPM. Product - Fan shall be model SQN-HP as manufactured by Loren Cook Company of Springfield, Missouri. Type SQN-HP is furnished standard with CUL Listing (Power Ventilator) when furnished with factory supplied motor. SQN-HP Dimension Data Size A B C D E Inlet and Rear Discharge Optional Side Discharge Max.Motor Duct Size (ID) Duct Size (WxH) (ID) Frame Size Approx. Ship Wt.* /4 22-1/4 2-3/4 12-1/2 18 sq. 14-1/4 x 13-1/8 145T /8 23-7/ /4 2 sq /16 x 16-1/8 145T / /4 22 sq. 19-1/8 x 18-1/8 182T /8 14-3/4 24 sq. 21 x 2-1/8 182T /4 32-1/ / sq. 23-1/4 x 22-1/8 182T / sq. 24-1/2 x 24-1/8 182T /4 37-1/4 33-1/2 15-1/4 3 sq. 26-3/4 x 26-1/8 184T /4 33 sq. 26-1/16 x 29-1/8 213T / /2 41-1/ / /4 36-7/16 sq /16 x 32-1/2 213T /4 4 sq. 3-1/8 x 36-1/8 213T /4 45-3/4 48-7/ /4 44 sq /16 x 4-1/8 215T /4 46 sq. 32-3/16 x 42-1/16 215T /4 46-1/4 5-1/4 55-1/8 17-1/4 5-3/4 sq. 36-5/16 x 46-15/16 254T 65 All dimensions in inches. *Weights in Lbs, Less Motor and Drives. 6

8 Universal Mounting - The SQN is provided with universal mounting feet for installation in any horizontal or vertical position. These feet are shipped loose for field installation in the desired location. The mounting feet are attached utilizing existing bolts in the fan. See the adjacent drawings for typical positions and dimensions. C Not on direct drive Vertical Floor or Ceiling D C A B B A Horizontal Floor or Ceiling - Motor on side Not on direct drive Not on direct drive D A D Horizontal Floor or Ceiling - Motor on top or bottom SQN-B Size A B C D / / / / / / / / / / / / / /8 16-3/8 21-7/ /8 24-3/8 18-5/8 23-3/ /4 26-1/ / / / /8 23-1/4 28-1/ /8 3-5/8 25-1/2 3-3/ /8 33-1/ / / / / /8 36-5/8 31-1/2 36-1/ / /4 4-3/ / / / / / /4 48-3/ /8 53-1/8 45-1/ / / /4 54-3/ /8 6-1/8 51-7/8 59-1/2 All dimensions in inches. SQN-D ACCESSORIES Size A B C D / / / / / / / / / / /8 16-3/8 21-7/ /8 24-3/8 18-5/8 23-3/ /4 26-1/ / / / /8 23-1/4 28-1/16 All dimensions in inches. Motors Direct Drive All direct drive motors are standard single phase 115-volt. Sizes 7 through 1 are either shaded pole or permanent split capacitor type motors. Sizes 12 through 165 are either permanent split capacitor (175 RPM motors) or split phase (1725 RPM motors). FSC can only be used on either shaded pole or permanent split capacitor type motors. Optional motors: Two speed, single-phase open motors supplied as 1725 RPM motors are 1725/114. Explosion proof motors are available for some units, contact factory for details. These optional motors cannot use an FSC. EC Motors Electronically Commutated (EC) Motors offer significantly improved energy efficiency and controllability over traditional fractional HP motors. The EC motor is offered in 1/4, 1/2 and 3/4 HP sizes for 12v, single phase applications and has an adjustable speed range of 5 to 1725 rpm. Two control options are available for each motor. The Motor Mounted Speed Control version includes an integral potentiometer mounted on the exterior of the motor for adjusting the motor speed. A screwdriver is used for adjustment. The External Signal Speed Control version requires a -1 VDC control signal to adjust the speed of the motor as well as a 24 VAC power source to operate the motor control circuit (a 24v transformer is included with the fan to power the motor control circuit). The motor will operate from 2-1 VDC and will turn off when the control signal is below 1.9 VDC. Belt Drive Single-phase motors: Open drip motors from 1/6 to 1-1/2 HP. Two-speed, motors in 1725/114 RPM, from 1/6 to. TEFC and Class 1, Group D, explosion proof motors from 1/4 to. Three-phase motors: Three-phase ODP motors from 1/4 to 15 HP. Two-speed, two winding motors in 1725/114 RPM, from 1/3 to 5 HP. TEFC and Class 1, Group D, explosion proof motors from 1/4 to. Variable Frequency Drive (VFD) compatible motors are available, contact factory for details. All single-phase and three-phase, single speed, open drip motors listed in performance tables are shipped factory installed. 7

9 ACCESSORIES Fan Speed Control 5 AMP FSC 1 AMP FSC Cook s FSC is a variable speed controller which can offer excellent energy conservation and lower sound levels when 1 percent of a direct drive fan operating capacity is not required. The FSC employs solid state circuitry for long life and dependability. The FSC is available only on 115V and 23V shaded pole or permanent split capacitor direct drive motors and is not available on 114 RPM and 1725 RPM motors. The FSC is normally shipped loose for field installation. Optional pre-wiring is available. Fan Speed Control for EC Motors External Speed Control for the Cook EC Motor allows the fan speed to be adjusted remotely via an easy to read dial. The controller allows for adjustment from 2-1% of the fan speed. The controller works with the external signal version of the Cook EC Motor and requires 24 VAC power for operation. Pressure control for EC Motors Constant pressure controller for the Cook EC Motor is for applications where the fan is intended to maintain a near constant pressure in a system such as dryer vents. The pressure controller reads the pressure in a duct system via the provided pressure transducer and automatically adjusts the fan rpm to maintain a preset value. The controller works with the external signal version of the Cook EC Motor and is shipped loose for field installation. Optional Coatings Lorenized is an electrostatically applied, baked polyester powder coating. Each component shall be subject to a five stage environmentally friendly wash system, followed by a minimum 2 mil thick baked powder finish. Coating must exceed 1, hour salt spray under ASTM B117 test method. Cook Epoxy Powder is an electrostatically applied, baked epoxy powder coating. Final coating thickness is mils. For outdoor applications an optional UV resistant topcoat is available to prevent cosmetic chalking of the coating. Cook Phenolic Epoxy Powder is an electrostatically applied, baked phenolic epoxy powder coating. Final coating thickness is 2-4 mils. For outdoor applications an optional UV resistant topcoat is required to prevent deterioration of the coating. Cook Easy Clean Powder is an electrostatically applied, baked modified epoxy silicone powder producing a high temperature non-stick coating. Final coating thickness is mils. Air Dry Phenolic (Heresite VR-54) is a conventional spray applied phenolic resin coating. Final coating thickness is 4-6 mils. For outdoor applications an optional UV resistant topcoat (Heresite UC-55) is required to prevent deterioration of the coating. Refer to the corrosion resistance guide in the Compute-A-Fan software for a listing of the coatings above and their resistance to a variety of chemicals. Additional special coatings are available. Read more in the Coating catalog 8

10 ACCESSORIES Belt Tensioner - Cook s automatic belt tensioner eliminates the need for regular manual retensioning of fan belts. The risk of inadvertantly over-tensioning drive components is avoided and overall drive operating efficiency is enhanced. Available on sizes to maintain proper belt tension. Motor Cover - The motor cover completely encloses the motor and drive assembly and also serves as an OSHA belt guard. The motor cover is constructed of 18 gauge galvanized steel and is intended for indoor use only. Motor covers are factory installed. Belt Guard - Belt guards are available which cover the drive assembly on the top, front and sides. The belt guard is constructed of minimum 18 gauge galvanized steel and has an open back which allows inspection and belt tensioning without removing the guard. Belt guards are factory installed. Inlet Safety Screen - Inlet safety screens are used in nonducted installations to protect personnel and prevent debris from entering the fan. This screen is constructed of 1/2 x 1/2 galvanized welded wire and is factory installed. Flex Duct Connector - Flex Duct Connectors are available for the inlet or outlet of the SQN. These connectors provide a flexible connection between the fan and the attached ductwork. This reduces the transmission of noise and vibration to the ductwork as well as allowing for slight misalignment and easy removal of the fan without disturbing the rigid ductwork. Flex Duct Connectors consist of reinforced neoprene fabric and aluminum bands. Safety Screen - safety screens are used on non-ducted installations to protect personnel and prevent debris from entering the fan. This screen is constructed of 16 gauge 1/2 x 1 expanded metal complete with mounting frame. This assembly is Lorenized and factory installed. Filter Box - A Filter Box is available which attaches to the inlet side of the SQN. This filter box is constructed of minimum 18 gauge galvanized steel and incorporates a removable access panel, washable slide-out filters and integral duct collars. Disposable filters are also available. Inlet/ Companion Flange - Inlet or Companion Flanges are available for use in conjunction with the optional Flanged Inlet or. The companion flange is attached to the adjacent ductwork to provide an exact mate to the flanged connection on the fan. Flanged Inlet/ - Flanged Inlet or connections are available which allow for flange type duct attachment in place of the standard slip connection. This type of connection allows the fan to be removed without disturbing the surrounding ductwork. Flanges are constructed of 1-1/2 x1-1/2 x1/8 structural angle and are factory mounted. 9

11 ACCESSORIES Disconnect Switches Backdraft Dampers - Backdraft dampers are available in gravity operated or motorized configurations for in-duct installation. These dampers feature an extruded aluminum frame, aluminum blades and aluminum hinge pins with nylon bushings. These dampers are shipped loose for field installation. NEMA 1 - Indoor general purpose. NEMA 1 (Lockable) - Indoor general purpose with locking capability. NEMA 4 - Watertight and dust-tight. NEMA 7 and NEMA 9 - Lockable, indoor, explosion proof. External Inlet Vane Damper - External Inlet Vane Dampers are used to provide precise air volume control while maintaining maximum efficiency and stable operation at reduced load conditions. Inlet Vane Dampers are available in aluminum or steel construction on sizes 135 through 42. These dampers are factory mounted and provided with an adjustment arm for manual or actuated control (actuator furnished by others). Cataloged performance is based on fans without inlet vane dampers. NEMA 1 NEMA 1 (lockable) NEMA 4 NEMA 7 NEMA 9 Vibration Isolators - Vibration isolation is recommended to reduce vibration and noise transmission to the floor or support structure. Isolators are available in both spring type and RIS (rubber-in-shear) type for floor or ceiling mounting. Housed spring floor isolators are also available where lateral movement must be limited. All isolators are shipped loose for field installation. Model RC RIS Ceiling Model SC Spring Ceiling Model HF Housed Floor Model SF Spring Floor Model RF RIS Floor Additional Accessories Insulated Housing - An acoustical lining is available for the interior of the SQN. This fiberglass duct liner provides a reduction in noise of approximately 3dB in each of the eight octave bands. Aluminum Construction - All aluminum construction is available on all sizes of SQN s. 1

12 OPTIONAL SIDE DISCHARGE Single Side Discharge Package - The Single Side Discharge Package consists of a side duct connection collar and a rear discharge block-off panel. This configuration allows air to exit from any one of the non-motor sides of the unit and provides tremendous versatility in installation. The rear discharge block-off panel is shipped installed on the unit and the side duct connection collar is shipped loose for field installation in place of any one of the three access doors utilizing existing bolts in the fan. The tables below indicate the percent change in performance when using the side discharge option. See the following page for some examples of typical installations. Dual Side Discharge Package - The Dual Side Discharge Package is identical to the Single Side Discharge Package with the exception that two sets of duct connection collars are provided. SQN Side Discharge Correction Factors SQN-B SQN-HP SQN-B SQN-HP SQN-D Size Single Dual Single Dual Size Single Dual Single Dual Size Single Dual CFM HP CFM HP CFM HP CFM HP CFM HP CFM HP CFM HP CFM HP CFM HP CFM HP 6 +3% +3% +3% -3% -3% +5% % -2% % % +5% -12% +1% % +2% -6% 7-5% +4% +8% +6% 7 +2% +2% +3% -3% -3% +5% % -2% 21 +1% -1% +5% -12% +1% % +2% -6% 9-4% +3% +8% +5% 8 +2% +2% +3% -4% -3% +5% % -3% % -1% +6% -12% +1% +1% +3% -7% 1-4% +3% +8% +4% 1 +1% +2% +3% -5% -3% +5% % -3% % -2% +6% -12% +1% +1% +3% -7% 12-3% +2% +9% +3% 12 +1% +1% +4% -6% -2% +4% +1% -4% 27 +2% -2% +6% -13% +1% +1% +3% -7% 135-2% +1% +9% +2% % +1% +4% -7% -2% +4% +1% -4% 3 +3% -2% +7% -13% +2% +2% +4% -8% 15-2% +1% +9% +1% 15 +1% +1% +4% -9% -1% +2% +1% -4% 33 +3% -2% +7% -13% +2% +2% +4% -8% 165-1% % +1% % 165 % % +4% -1% % % +1% -5% % -3% +7% -13% +2% +2% +4% -8% 18 % % +5% -12% +1% % +2% -6% 42 +3% -3% +7% -13% +2% +2% +4% -8% The factors indicate the percent change in performance that will occur when using these side discharge options. AMCA certified ratings seal does not apply when these factors are used. 11

13 TYPICAL SIDE DISCHARGE APPLICATIONS 12

14 7-165 SQN-D SQN-D Data Catalog Max. Nominal Motor CFM vs. Static Pressure Number Watts/BHP RPM HP SQN1D 58W / SQN12D 69W / SQN15D 114W / SQN1D 119W 142 1/ SQN12D 137W 16 1/ SQN15D 165W 171 1/ SQN1D 123W / SQN12D 149W 15 1/ SQN15D 181W / SQN1D.115 BHP / *12SQN17D.39 BHP / SQN1D.157 BHP 112 1/ *135SQN17D.62 BHP / SQN1D.294 BHP 113 1/ *15SQN17D 1.15 BHP SQN1D.468 BHP / *165SQN17D 1.81 BHP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Performance ratings do not include the effects of appurtenances (accessories). *These fans cannot be used with FSC speed controller. 7SQN1D, 7SQN12D, 7SQN15D.75 9SQN1D, 9SQN12D, 9SQN15D 1. 1SQN1D, 1SQN12D, 1SQN15D SQN1D 7SQN15D 7SQN12D SQN1D 9SQN15D 9SQN12D SQN12D 1SQN1D 1SQN15D 12SQN1D, 12SQN17D SQN1D, 135SQN17D SQN1D, 15SQN17D SQN17D SQN1D 135SQN1D 135SQN17D SQN1D 15SQN17D SQN1D, 165SQN17D SQN1D 165SQN17D

15 SQND-EC Data SQND-EC Catalog Number HP 7SQN17DEC 1/4 9SQN17DEC 1/4 1SQN17DEC 1/4 12SQN17DEC 1/2 Fan RPM Tip Speed FPM Max Watts CFM vs. Static Pressure SQN17DEC 3/ Performance certified is for Installation Type B: Free inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Performance ratings do not include the effects of appurtenances (accessories). *These fans cannot be used with FSC speed controller. 7SQN17DEC 9SQN17DEC 1SQN17DEC Operating Range Operating Range Oprating Range SQN17DEC SQN17DEC Operating Range Operating Range

16 6 SQN-B RPM 3123 RPM 2787 RPM 2451 RPM 2115 RPM 1779 RPM 1443 RPM 3795 RPM.25 HP.167 HP 12-1/2 max. 14 sq. 12 Data SQN-B 6 Wheel Diameter 1 Tip Speed (FPM) = 2.62 x RPM 6 SQN-B Max. HP =.15 x (RPM/1) 3 7 SQN-B Max. HP =.17 x (RPM/1) 3 Area = 1. FT 2 Velocity (FPM) = CFM/1. Max. Motor Frame Size - 143T 114 Motor Requirements - 12 and lower RPM 345 Motor Requirements - 25 and greater RPM 768 RPM SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. 15

17 7 SQN-B Data Wheel Diameter 1 Tip Speed (FPM) = 2.62 x RPM 6 SQN-B Max. HP =.15 x (RPM/1) 3 7 SQN-B Max. HP =.17 x (RPM/1) 3 Area = 1. FT 2 Velocity (FPM) = CFM/1. Max. Motor Frame Size - 143T 114 Motor Requirements - 12 and lower RPM 345 Motor Requirements - 25 and greater RPM 12-1/2 max. 14 sq SQN-B RPM 3671 RPM 3336 RPM 31 RPM 2666 RPM 2331 RPM 1996 RPM 1661 RPM 991 RPM.25 HP.167 HP SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. 16

18 8 SQN-B RPM 3172 RPM 2935 RPM 2698 RPM 2461 RPM 2224 RPM 1987 RPM 175 RPM 128 RPM.25 HP.167 HP 12-1/2 max. 14 sq. 12 Data SQN-B 8 Wheel Diameter 1 Tip Speed (FPM) = 2.62 x RPM 8 SQN-B Max. HP =.28 x (RPM/1) 3 1 SQN-B Max. HP =.32 x (RPM/1) 3 Area = 1. FT 2 Velocity (FPM) = CFM/1. Max. Motor Frame Size - 143T 114 Motor Requirements - 12 and lower RPM 345 Motor Requirements - 25 and greater RPM SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. 17

19 1 SQN-B Data Wheel Diameter 1 Tip Speed (FPM) = 2.62 x RPM 8 SQN-B Max. HP =.28 x (RPM/1) 3 1 SQN-B Max. HP =.32 x (RPM/1) 3 Area = 1. FT 2 Velocity (FPM) = CFM/1. Max. Motor Frame Size - 143T 114 Motor Requirements - 12 and lower RPM 345 Motor Requirements - 25 and greater RPM 12-1/2 max. 14 sq SQN-B RPM 345 RPM 2847 RPM 2649 RPM 2451 RPM 2253 RPM 255 RPM 1857 RPM 1459 RPM.25 HP.167 HP SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. 18

20 12 SQN-B RPM 2665 RPM RPM RPM 259 RPM RPM 1655 RPM 1453 RPM RPM.25 HP.167 HP /1 6 sq /2 max. Data SQN-B 12 Wheel Diameter 12 Tip Speed (FPM) = 3.14 x RPM 12 SQN-B Max. HP =.79 x (RPM/1) 3 Area = 1.78 FT 2 Velocity (FPM) = CFM/1.78 Max. Motor Frame Size - 145T 114 Motor Requirements - 12 and lower RPM 345 Motor Requirements - 27 and greater RPM SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. 19

21 135 SQN-B / SQN-HP Data Wheel Diameter 13.5 Tip Speed (FPM) = 3.53 x RPM 135 SQN-B Max. HP =.138 x (RPM/1) SQN-HP Max. HP =.93 x (RPM/1) 3 Area = 2.25 FT 2 Velocity (FPM) = CFM/2.25 Max. Motor Frame Size - 145T 114 Motor Requirements - 1 and lower RPM 12-1/2 max. 2-3/4 sq SQN-B 135 SQN-HP RPM 2185 RPM RPM 1891 RPM RPM 1597 RPM RPM 133 RPM RPM.25 HP.167 HP RPM 2445 RPM RPM RPM 1914 RPM 1737 RPM RPM 1383 RPM RPM.25 HP.167 HP 1 2-1/4 22-1/ SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. 2

22 Data SQN-B / SQN-HP SQN-B RPM 1959 RPM 1819 RPM 1679 RPM 1539 RPM 1399 RPM 1259 RPM 1119 RPM 835 RPM 1.25 HP.167 HP 2 HP SQN-HP RPM 2695 RPM 2461 RPM 2227 RPM 1993 RPM RPM HP 1525 RPM 1291 RPM 82 RPM.167 HP.25 HP 1 2 HP /4 max. 23 sq /8 23-7/8 Wheel Diameter 15 Tip Speed (FPM) = 3.93 x RPM 15 SQN-B Max. HP =.242 x (RPM/1) 3 15 SQN-HP Max. HP =.96 x (RPM/1) 3 Area = 2.78 FT 2 Velocity (FPM) = CFM/2.78 Max. Motor Frame Size - 145T 114 Motor Requirements - 9 and lower RPM 15 SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. 21

23 165 SQN-B / SQN-HP Data Wheel Diameter 16.5 Tip Speed (FPM) = 4.32 x RPM 165 SQN-B Max. HP =.396 x (RPM/1) SQN-HP Max. HP =.195 x (RPM/1) 3 Area = 3.36 FT 2 Velocity (FPM) = CFM/3.36 Max. Motor Frame Size - 182T Reinforced Wheel Requirements - SQN-B = 1833 and greater RPM 25-5/16 sq /4 max. 165 SQN-B 165 SQN-HP RPM 1951 RPM RPM RPM 1483 RPM RPM 1171 RPM 115 RPM.8 74 RPM.167 HP.25 HP 2 HP 1 3 HP RPM 2428 RPM RPM RPM 187 RPM RPM 1393 RPM RPM 1.25 HP 2 HP 769 RPM.167 HP 3 HP SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. Shaded area indicates reinforced wheel required. 22

24 18 SQN-B 18 SQN-HP RPM 166 RPM 1534 RPM 148 RPM 1282 RPM 2 HP RPM 13 RPM 94 RPM.7 65 RPM.167 HP HP 1 3 HP RPM 2 RPM 1831 RPM 1662 RPM RPM RPM RPM HP 986 RPM 1 2 HP.25 HP 647 RPM.167 HP 3 HP /4 max. 27-5/8 sq Data SQN-B / SQN-HP 18 Wheel Diameter 18 Tip Speed (FPM) = 4.71 x RPM 18 SQN-B Max. HP =.59 x (RPM/1) 3 18 SQN-HP Max. HP =.347 x (RPM/1) 3 Area = 4. FT 2 Velocity (FPM) = CFM/4. Max. Motor Frame Size - 182T Reinforced Wheel Requirements - SQN-B = 161 and greater RPM 18 SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. Shaded area indicates reinforced wheel required. 23

25 195 SQN-B / SQN-HP Data Wheel Diameter 19.5 Tip Speed (FPM) = 5.11 x RPM 195 SQN-B Max. HP =.88 x (RPM/1) SQN-HP Max. HP =.518 x (RPM/1) 3 Area = 4.69 FT 2 Velocity (FPM) = CFM/4.69 Max. Motor Frame Size - 182T 29-15/16 sq. Reinforced Wheel Requirements - 26 SQN-B = 1429 and greater RPM 15 max. 3-1/4 195 SQN-B 195 SQN-HP RPM 1367 RPM 1254 RPM 1141 RPM 128 RPM 915 RPM 82 RPM 575 RPM 1593 RPM.25 HP.167 HP /4 2 HP 1 3 HP RPM 184 RPM 1653 RPM 152 RPM 1351 RPM 12 RPM 149 RPM 898 RPM.25 HP 595 RPM.167 HP 3 HP 1 2 HP SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. Shaded area indicates reinforced wheel required. 24

26 Data SQN-B / SQN-HP SQN-B 21 SQN-HP RPM 1781 RPM RPM RPM 127 RPM RPM RPM 1364 RPM 115 RPM RPM RPM 823 RPM 186 RPM 727 RPM 947 RPM RPM 536 RPM.25 HP 531 RPM HP 3 HP 1.25 HP 3 HP.167 HP 2 HP 1 15 max. 31-1/4 sq Wheel Diameter 21 Tip Speed (FPM) = 5.5 x RPM 21 SQN-B Max. HP = x (RPM/1) 3 21 SQN-HP Max. HP =.746 x (RPM/1) 3 Area = 5.44 FT 2 Velocity (FPM) = CFM/5.44 Max. Motor Frame Size - 182T Reinforced Wheel Requirements - SQN-B = 1277 and greater RPM 21 SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. Shaded area indicates reinforced wheel required. 25

27 225 SQN-B / SQN-HP Data Wheel Diameter 22.5 Tip Speed (FPM) = 5.89 x RPM 225 SQN-B Max. HP = x (RPM/1) /4 max. 225 SQN-HP Max. HP = 1.53 x (RPM/1) 3 Area = 6.25 FT 2 Velocity (FPM) = CFM/6.25 Max. Motor Frame Size - 184T 33-1/2 sq. Reinforced Wheel Requirements - 3 SQN-B =1152 and greater RPM SQN-HP =15 and greater RPM 34-1/4 37-1/4 225 SQN-B 225 SQN-HP RPM 1352 RPM 1245 RPM 1138 RPM 131 RPM 924 RPM 817 RPM 71 RPM RPM HP 2 HP 1 3 HP 5 HP RPM RPM 1559 RPM RPM 1257 RPM RPM 955 RPM RPM 56 RPM 2 HP 5 HP 3 HP 1.25 HP SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. Shaded area indicates reinforced wheel required. 26

28 Data SQN-B / SQN-HP SQN-B RPM 1338 RPM 1242 RPM 1146 RPM 15 RPM 954 RPM 858 RPM 762 RPM 573 RPM.25 HP 3 HP 1 5 HP 7 2 HP SQN-HP RPM 1625 RPM 1477 RPM 1329 RPM 1181 RPM 133 RPM 885 RPM 737 RPM 44 RPM 2 HP 5 HP 1 3 HP /4 max. 36 sq Wheel Diameter 24.5 Tip Speed (FPM) = 6.41 x RPM 245 SQN-B Max. HP = x (RPM/1) SQN-HP Max. HP = 1.75 x (RPM/1) 3 Area = 7.56 FT 2 Velocity (FPM) = CFM/7.56 Max. Motor Frame Size - 213T Reinforced Wheel Requirements - SQN-B = 115 and greater RPM 245 SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. Shaded area indicates reinforced wheel required. 27

29 27 SQN-B / SQN-HP Data Wheel Diameter 27 Tip Speed (FPM) = 7.7 x RPM 27 SQN-B Max. HP = x (RPM/1) /4 max. 27 SQN-HP Max. HP = x (RPM/1) 3 Area = 9.18 FT 2 Velocity (FPM) = CFM/9.18 Max. Motor Frame Size - 213T 39-11/16 sq. Reinforced Wheel Requirements /16 SQN-B = 876 and greater RPM SQN-HP = 125 and greater RPM 37-1/2 41-1/2 27 SQN-B 27 SQN-HP RPM 1226 RPM RPM 1138 RPM 15 RPM 135 RPM RPM 1176 RPM RPM RPM 786 RPM 698 RPM.8 61 RPM 1.2 RPM RPM HP RPM 918 RPM HP 2 HP 3 HP RPM 3 HP 2 HP 7 5 HP 27 SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. Shaded area indicates reinforced wheel required. 28

30 Data SQN-B / SQN-HP 3 3 SQN-B RPM 954 RPM RPM 814 RPM RPM 674 RPM RPM 534 RPM RPM 2 HP 1 3 SQN-HP RPM 1119 RPM 134 RPM 949 RPM 864 RPM 779 RPM RPM HP 69 RPM 435 RPM 1 3 HP 5 HP /4 max. 44 sq. 4 Wheel Diameter 3 Tip Speed (FPM) = 7.85 x RPM 3 SQN-B Max. HP = 7.71 x (RPM/1) 3 3 SQN-HP Max. HP = x (RPM/1) 3 Area = FT 2 Velocity (FPM) = CFM/11.11 Max. Motor Frame Size - 215T Reinforced Wheel Requirements - SQN-B = 837 and greater RPM SQN-HP = 98 and greater RPM 3 HP 5 HP HP SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. Shaded area indicates reinforced wheel required. 29

31 33 SQN-B / SQN-HP Data Wheel Diameter 33 Tip Speed (FPM) = 8.64 x RPM 33 SQN-B Max. HP = x (RPM/1) 3 33 SQN-HP Max. HP = x (RPM/1) 3 Area = FT 2 Velocity (FPM) = CFM/13.44 Max. Motor Frame Size - 215T Reinforced Wheel Requirements - SQN-B = 716 and greater RPM SQN-HP = 83 and greater RPM 17-1/4 max. 48-7/16 sq /4 45-3/4 33 SQN-B 33 SQN-HP RPM RPM 828 RPM RPM 694 RPM RPM 56 RPM 493 RPM RPM 3 HP 2 HP 7 5 HP RPM 191 RPM 14 RPM 917 RPM 83 RPM 743 RPM 656 RPM 569 RPM 394 RPM HP 3 HP HP 33 SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. Shaded area indicates reinforced wheel required. 3

32 365 SQN-B RPM 733 RPM 68 RPM 627 RPM 574 RPM 521 RPM 468 RPM 415 RPM 37 RPM 3 HP 5 HP 7 2 HP SQN-HP Wheel Diameter RPM 959 RPM 88 RPM 81 RPM 722 RPM RPM RPM2 485 RPM HP 324 RPM 3 HP HP /4 max. 5 sq Data SQN-B / SQN-HP 365 Tip Speed (FPM) = 9.56 x RPM 365 SQN-B Max. HP = x (RPM/1) SQN-HP Max. HP = x (RPM/1) 3 Area = FT 2 Velocity (FPM) = CFM/14.69 Max. Motor Frame Size - 215T Reinforced Wheel Requirements - SQN-B = 624 and greater RPM SQN-HP = 735 and greater RPM 365 SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. Shaded area indicates reinforced wheel required. 31

33 42 SQN-B / SQN-HP Data Wheel Diameter 4.25 Tip Speed (FPM) = 1.54 x RPM Max. HP = x (RPM/1) /4 max. Area = FT 2 Velocity (FPM) = CFM/17.87 Max. Motor Frame Size - 215T Reinforced Wheel Requirements /8 sq. SQN-B = 539 and greater RPM 5-3/4 SQN-HP = 63 and greater RPM 46-1/4 5-1/4 42 SQN-B 42 SQN-HP RPM 638 RPM RPM RPM 53 RPM 458 RPM RPM 368 RPM RPM 2 HP 1 3 HP 7 5 HP RPM RPM 82 RPM RPM 67 RPM RPM 52 RPM RPM 293 RPM 3 HP 2 HP 1 5 HP 15 HP SQN-B.125 SP.25 SP.5 SP.75 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP SQN-HP.25 SP.5 SP 1. SP 1.5 SP 2. SP 2.5 SP 3. SP 4. SP 5. SP Performance certified is for Installation Type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). Underlined figures indicate point of maximum static efficiency. Shaded area indicates reinforced wheel required. 32

34 Sound Data SQND 7SQN1D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN12D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN15D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN1D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN12D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN15D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN1D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN12D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN15D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN1D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN17D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN1D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN17D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN1D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN17D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN1D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi SQN17D L Wi -1 L Wi -2 L Wi -3 L Wi -4 L Wi -5 L Wi -6 L Wi -7 L Wi The sound power level ratings shown are in decibels referred to 1-12 watts calculated per AMCA Standard 31. The A-weighted sound ratings shown have been calculated per AMCA Standard 31. Values shown are for inlet L Wi and inlet sound power levels for Installation Type B: Free inlet, Ducted outlet. Ratings do not include the effects of duct end correction. 33

35 SQND-EC Sound Data 7SQN17DEC Sound Power re 1-12 Watts RPM Condition SP L W A Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet SQN17DEC Sound Power re 1-12 Watts RPM Condition SP L W A Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet SQN17DEC Sound Power re 1-12 Watts RPM Condition SP Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet The sound power level ratings shown are in decibels referred to 1-12 watts calculated per AMCA Standard 31. The A-weighted sound ratings shown have been calculated per AMCA Standard 31. Values shown are for inlet L Wi, inlet L W A, outlet L WO, and outlet L WO A sound power levels for Installation Type B: Free inlet, Ducted outlet. Ratings do not include the effects of duct end correction. 34

36 Sound Data SQND-EC 12SQN17DEC Sound Power re 1-12 Watts RPM Condition SP L W A Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet SQN17DEC Sound Power re 1-12 Watts RPM Condition SP L W A Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet Inlet The sound power level ratings shown are in decibels referred to 1-12 watts calculated per AMCA Standard 31. The A-weighted sound ratings shown have been calculated per AMCA Standard 31. Values shown are for inlet L Wi and inlet sound power levels for Installation Type B: Free inlet, Ducted outlet. Ratings do not include the effects of duct end correction. 35

37 SQN-B Sound Data 6 SQN-B Sound Power re 1-12 Watts SQN-B Sound Power re 1-12 Watts SQN-B Sound Power re 1-12 Watts SQN-B Sound Power re 1-12 Watts The sound power level ratings shown are in decibels referred to 1-12 watts calculated per AMCA Standard 31. The A-weighted sound ratings shown have been calculated per AMCA Standard 31. Values shown are for inlet L Wi and inlet sound power levels for Installation Type B: Free inlet, Ducted outlet. Ratings do not include the effects of duct end correction. 36

38 Sound Data SQN-B / SQN-HP 12 SQN-B RPM Sound Power re 1-12 Watts SP SQN-B Sound Power re 1-12 Watts SQN-HP Sound Power re 1-12 Watts The sound power level ratings shown are in decibels referred to 1-12 watts calculated per AMCA Standard 31. The A-weighted sound ratings shown have been calculated per AMCA Standard 31. Values shown are for inlet L Wi and inlet sound power levels for Installation Type B: Free inlet, Ducted outlet. Ratings do not include the effects of duct end correction. 37

39 SQN-B / SQN-HP Sound Data 15 SQN-B Sound Power re 1-12 Watts SQN-B RPM Sound Power re 1-12 Watts SP SQN-HP Sound Power re 1-12 Watts SQN-HP Sound Power re 1-12 Watts The sound power level ratings shown are in decibels referred to 1-12 watts calculated per AMCA Standard 31. The A-weighted sound ratings shown have been calculated per AMCA Standard 31. Values shown are for inlet L Wi and inlet sound power levels for Installation Type B: Free inlet, Ducted outlet. Ratings do not include the effects of duct end correction. 38

40 Sound Data SQN-B / SQN-HP 18 SQN-B Sound Power re 1-12 Watts SQN-B Sound Power re 1-12 Watts SQN-HP Sound Power re 1-12 Watts SQN-HP Sound Power re 1-12 Watts The sound power level ratings shown are in decibels referred to 1-12 watts calculated per AMCA Standard 31. The A-weighted sound ratings shown have been calculated per AMCA Standard 31. Values shown are for inlet L Wi and inlet sound power levels for Installation Type B: Free inlet, Ducted outlet. Ratings do not include the effects of duct end correction. 39

41 SQN-B / SQN-HP Sound Data 21 SQN-B Sound Power re 1-12 Watts SQN-HP Sound Power re 1-12 Watts SQN-B Sound Power re 1-12 Watts SQN-HP Sound Power re 1-12 Watts The sound power level ratings shown are in decibels referred to 1-12 watts calculated per AMCA Standard 31. The A-weighted sound ratings shown have been calculated per AMCA Standard 31. Values shown are for inlet L Wi and inlet sound power levels for Installation Type B: Free inlet, Ducted outlet. Ratings do not include the effects of duct end correction. 4

42 Sound Data SQN-B / SQN-HP 245 SQN-B Sound Power re 1-12 Watts SQN-B Sound Power re 1-12 Watts SQN-HP Sound Power re 1-12 Watts SQN-HP Sound Power re 1-12 Watts The sound power level ratings shown are in decibels referred to 1-12 watts calculated per AMCA Standard 31. The A-weighted sound ratings shown have been calculated per AMCA Standard 31. Values shown are for inlet L Wi and inlet sound power levels for Installation Type B: Free inlet, Ducted outlet. Ratings do not include the effects of duct end correction. 41

43 SQN-B / SQN-HP Sound Data 3 SQN-B Sound Power re 1-12 Watts SQN-HP Sound Power re 1-12 Watts SQN-B The sound power level ratings shown are in decibels referred to 1-12 watts calculated per AMCA Standard 31. The A-weighted sound ratings shown have been calculated per AMCA Standard 31. Values shown are for inlet L Wi and inlet sound power levels for Installation Type B: Free inlet, Ducted outlet. Ratings do not include the effects of duct end correction. RPM Sound Power re 1-12 Watts SP SQN-HP Sound Power re 1-12 Watts

44 365 SQN-B Sound Power re 1-12 Watts SQN-HP Sound Power re 1-12 Watts SQN-B Sound Data SQN-B / SQN-HP The sound power level ratings shown are in decibels referred to 1-12 watts calculated per AMCA Standard 31. The A-weighted sound ratings shown have been calculated per AMCA Standard 31. Values shown are for inlet L Wi and inlet sound power levels for Installation Type B: Free inlet, Ducted outlet. Ratings do not include the effects of duct end correction. RPM Sound Power re 1-12 Watts SP SQN-HP Sound Power re 1-12 Watts

45 OTHER AVAILABLE PRODUCTS Visit lorencook.com to view our complete line of products! 44