pump selection guide PONNDORF PX single series PDX single series PD/2 dual series PK series
|
|
|
- Tiffany Douglas
- 6 years ago
- Views:
Transcription
1 pump selection guide Pump Pump Max flow rate Dry Lubricated Three Compression Special series m 3 /hr (GPM) running bath roller shoe features Page(s) PX single 12.5 (55) Molded tubing with rib and flange PX single series PX/2 dual 24.5 (108) PDX single 4.0 (18) Ponnprene TPE food grade tubing PDX/2 dual 6.7 (30) PDX single series PD single 5.5 (24.2) Natural rubber higher pressure hose PD/2 dual 9.5 (41.8) PD/2 dual series PK 32.0 (140) High pressure reinforced hose PK series 36
2 pump hose PONNDORF All Ponndorf pump hose is precision molded to optimize performance with Ponndorf hose pumps PX series PDX series PD series PK series Specifications & Ordering Information Pump Max flow Max pressure Max suction series m 3 /hr (GPM) bar (psig) m (ft) of H 2 0 Natural rubber Ponndorf pump hose formulation Food-grade natural rubber Neoprene Hypalon Food-grade Ponnprene PX (0.66) 2 (30) 7 (23) VA VA VA VA PX 10/ (1.1) 2 (30) 7 (23) VA VA VA VA PX (2.2) 2 (30) 7 (23) VA VA VA VA PX 15/ (4.2) 2 (30) 7 (23) VA VA VA VA PX (9.7) 2 (30) 7 (23) VA VA VA VA PX 27/2 5.0 (22) 2 (30) 7 (23) VA VA VA VA PX (26) 2 (30) 7 (23) VA VA VA VA PX 35/ (51) 2 (30) 7 (23) VA VA VA VA PX (55) 2 (30) 7 (23) VA VA VA VA PX 50/ (108) 2 (30) 7 (23) VA VA VA VA PDX (2.2) 2 (30) 7 (23) VA PDX 19/ (3.7) 2 (30) 7 (23) VA PDX (12) 2 (30) 7 (23) VA PDX 30/2 4.5 (20) 2 (30) 7 (23) VA PDX 35 4 (18) 2 (30) 7 (23) VA PDX 35/2 6.7 (30) 2 (30) 7 (23) VA PD (2.2) 4 (60) 8 (26) VA PD 15/ (4.2) 4 (60) 8 (26) VA PD (11) 4 (60) 8 (26) VA PD 27/2 4.8 (21) 4 (60) 8 (26) VA PD (24.2) 4 (60) 8 (26) VA PD 35/2 9.5 (42) 4 (60) 8 (26) VA Pump Max flow Max pressure Max suction Ponndorf pump hose formulation series m 3 /hr (GPM) bar (psig) m (ft) of H 2 0 Natural rubber EPDM Food grade NBR PK (3) 5 (220) 8 (26) VA VA VA PK (9.2) 5 (220) 8 (26) VA VA VA PK (34) 5 (220) 8 (26) VA VA VA PK (68) 5 (220) 8 (26) VA VA VA PK (140) 5 (220) 8 (26) VA VA VA
3 PX & PX/2 series Metering, transfer, self-priming, and low-pulsation models Easy maintenance disassembly not required PX series single-channel pump PX 15 Rib-back hose for positive retention in pump and easy replacement without disassembly of the pump Dry running design provides long tubing life and prevents system contamination should the hose ever rupture Flow capacities are available up to 12.5 m 3 /hr (55 GPM) for single hose and up to 24.5 m 3 /hr (108 GPM) with our unique dual hose design Hose rib is positively captured in the tube bed and prevents the hose from side-to-side movement, which shortens hose life in other pump designs Pump are shipped complete with motor and fixedspeed drive systems ready to install and start Options include mechanical variable speed, variable-frequency, hazardous-area rated, washdown, chemical duty, air-operated, or bare-shaft pumps only PX/2 series dual-channel pump PX 15/2 38
4 PONNDORF Specifications & Ordering Information Catalog number PX 10 PX 10/2 PX 15 PX 15/2 PX 27 PX 27/2 PX 35 PX 35/2 PX 50 PX 50/2 Normal capacity 165 rpm m 3 /hr (GPM) (0.66) (1.1) (2.2) (4.8) (9.7) (22) (26) (51) (55) (108) Normal capacity 100 rpm m 3 /hr (GPM) (0.40) (0.7) (1.3) (2.5) (5.7) (13) (15) (31) (33) (66) Hose ID, mm (in.) 10 (0.39) 10 (0.39) 15 (0.59) 15 (0.59) 27 (1.06) 27 (1.06) 35 (1.38) 35 (1.38) 50 (1.97) 50 (1.97) Connection OD, mm (in.) 14 (0.55) 14 (0.55) 25 (0.98) 25 (0.98) 33 (1.30) 33 (1.30) 51 (2.0) 51 (2.0) 75 (2.95) 75 (2.95) Max power, hp (kw) 1 2 (0.37) 1 2 (0.37) 1 2 (0.37) 3 4 (0.56) 1 2 (0.37) (1.1) 2 (1.5) 5 (3.7) 3 (2.2) 5 (3.7) Dimensions (L x W x H), 600 x 300 x x 300 x x 300 x x 400 x x 400 x 650 mm (in.) (23.62 x x 8.84) (23.62 x x 12.36) (23.62 x x 17.09) (33.86 x x 22.72) (33.86 x x 25.59) Est. weight with motor lb (kg) 73 (33) 82 (37) 83 (38) 105 (48) 106 (48) 144 (68) 200 (91) 300 (136) 248 (113) 367 (167) Construction materials Housing with epoxy coating Tube bed PTFE Inlet/outlet fittings Polypropylene (standard fittings); 316 SS (optional) Rollers Carbon-filled PTFE Rotor Shaft Stainless steel Bearings Permanently sealed grease filled ball bearings Hose material options Natural rubber, food-grade rubber, Neoprene, Hypalon Max rpm 165 (continuous) 60 C (140 F) (intermittent) 80 C (176 F) Max pressure 2 bar (30 psig) Max suction height 7 m (23 ft) Max viscosity 35,000 cps (160,000 SSU) The standard inlet and outlet connections provided are a barbed hose type. Optional inlet and outlet connections available include ANSI 150# flanges, sanitary Tri-Clamp fittings, and NPT connections. Specifications & Ordering Information Fittings Pump series Polypropylene Stainless steel Stainless steel Stainless steel Stainless steel Hose ID (mm) Cat. no. Hose ID (mm) Cat. no. NPT Cat. no. Flange size* Cat. no. Tri-Clamp size Cat. no. PX 10 or PX 10/ VA VA " VA " VA " VA PX 15 or PX 15/ VA VA " VA " VA " VA PX 27 or PX 27/ VA VA " VA " VA " VA PX 35 or PX 35/ VA VA " VA " VA " VA PX 50 or PX 50/ VA VA " VA " VA " VA *ANSI 150# flange Hose retainer ring Molded-in hose flange Discharge Unique flanged and ribbed hose improves retention and positively holds hose in pump Inlet 39
5 PDX & PDX/2 series Metering, transfer, self-priming, and low-pulsation models Flow capacities are available up to 4.0 m 3 /hr (18 GPM) for single hose and up to 6.7 m 3 /hr (29 GPM) with our unique dual hose design Food-grade tubing is ideal for demanding pump applications in food, pharmaceutical, high-purity chemicals, and higher temperature applications Pressure up to 2 bar (30 psig) Handles hot fluids up to 130 C (266 F) PDX series single-channel pump Dry running design provides long tubing life and prevents system contamination should the hose ever rupture Easy maintenance and hose replacement without disassembly of the pump Flanged tube bed prevents side-to-side movement of hose and improves hose life Pumps are shipped complete with motor and fixed-speed drive systems ready to install and start Optional drives include mechanical variable speed, variable-frequency, hazardous-area rate, washdown, chemical duty, and air-operated, or base shaft pumps only Dual hose models (PDX/2) available PDX/2 series dual-channel pump 40
6 PONNDORF Specifications & Ordering Information Catalog number PDX 19 PDX 19/2 PDX 30 PDX 30/2 PDX 35 PDX 35/2 Normal capacity 165 rpm GPM (m 3 /hr) (0.5) (0.85) (2.7) (4.5) (4.0) (6.7) Normal capacity 100 rpm GPM (m 3 /hr) (0.3) (0.5) (1.7) (2.7) (2.5) (4.0) Hose ID, in (mm) 0.75 (19) 0.75 (19) 1.18 (30) 1.18 (15) 1.18 (30) 1.18 (30) Connection OD, in (mm) 0.98 (25) 0.98 (25) 1.30 (33) 1.30 (33) 2.0 (51) 2.0 (51) Max power, hp (kw) 1 2 (0.37) 1 (0.75) 3 4 (0.56) (1.1) (1.1) 2 (2.2) Dimensions (L x W x H), 600 x 300 x x 300 x x 300 x x 300 x x 400 x x 400 x 577 mm (in) (23.62 x x 12.68) (23.62 x x 12.68) (23.62 x x 17.56) (23.62 x x 17.56) (33.86 x x 23.23) (33.86 x x 23.23) Est. wt with motor kg (lb) 38 (84) 49 (107) 49 (107) 69 (152) 92 (202) ) Construction materials Housing Tube bed PTFE Inlet/outlet fittings Polypropylene (standard fittings); 316 SS (optional) Rollers Carbon-filled PTFE Rotor Shaft Stainless steel Bearings Permanently sealed grease filled ball bearings Hose material options Food grade Ponnprene TPE (PP/EPDM) Max rpm 165 (continuous) 90 C (194 F) (intermittent) 130 C (266 F) Max pressure 2 bar (30 psig) Max suction height Max viscosity 7 m (23 ft) 35,000 cps (160,000 ssu) The standard inlet and outlet connections provided are a barbed hose type. Optional inlet and outlet connections available include ANSI 150# flanges, sanitary Tri-Clamp fittings, and NPT connections. Specifications & Ordering Information Fittings Pump series Polypropylene Stainless steel Stainless steel Stainless steel Stainless steel Hose ID (mm) Cat. no. Hose ID (mm) Cat. no. NPT Cat. no. Flange size* Cat. no. Tri-Clamp size Cat. no. PDX 19 or PDX 19/ VA VA " VA " VA " VA PDX 30 or PDX 30/ VA VA " VA " VA " VA PDX 35 or PDX 35/ VA VA " VA " VA " VA *ANSI 150# flange Hose retainer ring Molded-in hose flange Compression ring secures hose against inlet/discharge connector, providing a leak-proof connection Discharge Inlet 41
7 PD & PD/2 series Metering, transfer, and high-pressure filtration Self-priming and low-pulsation models Flow capacities are available up to 5.5 m 3 /hr (24 GPM) for single hose and up to 9.5 m 3 /hr (42 GPM) with our unique dual hose design Pressure up to 4 bar (60 psig) PD series single-channel pump Dry running design provides long tubing life and prevents system contamination should the hose ever rupture Easy hose replacement without disassembly of the pump Flanged tube bed prevents side-to-side movement of the hose Pumps are shipped complete with motor and fixed-speed drive systems ready to install and start Optional drives include mechanical variable speed, variable-frequency, hazardous-area rate, washdown, chemical duty, air-operated, or base shaft pump only Dual hose models available (PD/2) PD/2 series dual-channel pump 42
8 PONNDORF Specifications & Ordering Information Catalog number PD 15 PD 15/2 PD 27 PD 27/2 PD 35 PD 35/2 Normal capacity 165 rpm m 3 /hr (GPM) (2.2) (4.2) (11) (21.1) (24.2) (41.8) Normal capacity 100 rpm m 3 /hr (GPM) (1.3) (2.6) (6.6) (12.8) (14.5) (25.4) Hose ID, mm (in) 15 (0.59) 15 (0.59) 27 (1.06) 29 (1.06) 51 (2.01) 35 (1.38) Connection OD, mm (in) 25 (0.98) 25 (0.98) 33 (1.30) 33 (1.30) 33 (1.30) 51 (2.01) Max power, hp (kw) 1 2 (0.37) 3 4 (0.55) 3 4 (0.55) 2 (1.1) 2 (1.1) 5 (3) Dimensions (L x W x H), 600 x 300 x x 300 x x 300 x 434 mm (in) (23.62 x x 8.84) (23.62 x x 12.36) (23.62 x x 17.09) Est. wt with motor kg (lb) 38 (84) 49 (107) 49 (107) 69 (152) 92 (202) 139 (306) Construction materials Housing Tube bed PTFE Inlet/outlet fittings Polypropylene (standard fittings); 316 SS (optional) Rollers Carbon-filled PTFE Rotor Shaft Stainless steel Bearings Permanently sealed grease filled ball bearings Hose material options Natural rubber Max rpm 165 (continuous) 60 C (140 F) (intermittent) 80 C (176 F) Max pressure 4 bar (60 psig ) Max suction height Max viscosity 8 m (26 ft) 35,000 cps (160,000 ssu) The standard inlet and outlet connections provided are a barbed hose type. Optional inlet and outlet connections available include ANSI 150# flanges, Sanitary Tri-Clamp fittings, and NPT connections. Specifications & Ordering Information Fittings Pump series Polypropylene Stainless steel Stainless steel Stainless steel Stainless steel Hose ID (mm) Cat. no. Hose ID (mm) Cat. no. NPT Cat. no. Flange size Cat. no. Tri-Clamp size Cat. no. PD 15 or PD 15/ VA VA " VA " VA " VA PD 27 or PD 27/ VA VA " VA " VA " VA PD 35 or PD 35/ VA VA " VA " VA " VA Compression ring secures hose against inlet/discharge connector, providing a leak-proof connection Discharge Inlet 43
9 PK series Flow capacities up to 32 m 3 /hr (140 GPM) easily develop a discharge pressure up to 15 bar (220 psig ) Multiple hose materials provide compatibility in a wide range of pump applications Reinforced high-pressure hoses Sliding shoe technology combined with a lubricated bath provides a simple, reliable pump mechanism with proven long hose life in continuous operation Adjustable sliding shoes optimize hose compression for long hose life Easy hose replacement without disassembly of the pump Hose connectors are uniquely designed to eliminate multiple parts, yet provide a positive seal capable of holding the maximum pressure ratings Pumps are shipped complete with motor and fixed-speed drive systems ready to install and start Optional drives include mechanical variable speed and inverter variable, or base-shaft pumps only PK series pump 44
10 PONNDORF Specifications & Ordering Information Catalog number PK15 PK25 PK40 PK50 PK65 Normal capacity 90 rpm m 3 /hr (GPM) (3) (9.2) (33.9) (68) (140) Normal capacity 60 rpm m 3 /hr (GPM) (1) (6.2) (22.6) (45) (97) Hose ID, mm Connection OD, mm Max power, hp (kw) 3 4 (0.56) 3 (2.2) 5 (3) 3 4 (0.56) 15 (11.2) Dimensions (L x W x H), 712 x 155 x x 194 x x 300 x x 300 x x 466 x 1040 mm (in) (28.0 x 6.10 x 13.7) (38.3 x 7.64 x 18.7) (44.1 x 11.8 x 29.8) (48.6 x 11.8 x 33.1) (58.0 x 18.3 x 40.9) Hose material options Natural rubber, NBR, white, food grade, EPDM Construction materials Housing Tube bed PTFE Inlet/outlet fittings Polypropylene (standard fittings); 316 SS (optional) Rollers Carbon-filled PTFE Rotor Shaft Stainless steel Bearings Permanently sealed grease filled ball bearings Max rpm 90 (continuous) 60 C (140 F) (intermittent) 80 C (176 F) Max pressure 15 bar (220 psig) Max suction height 8 m (26 ft) Max viscosity 35,000 cps (160,000 ssu) The standard inlet and outlet connections provided are a barbed hose type. Optional inlet and outlet connections available include ANSI 150# flanges, Sanitary Tri-Clamp fittings, and NPT connections. Specifications & Ordering Information Fittings Pump series Polypropylene Stainless steel Stainless steel Stainless steel Stainless steel Hose ID (mm) Cat. no. Hose ID (mm) Cat. no. NPT Cat. no. Flange size Cat. no. Tri-Clamp size Cat. no. PK VA " VA " VA " VA PK VA " VA " VA " VA PK VA " VA " VA " VA PK VA " VA " VA " VA PK VA " VA " VA " VA Unique compression ring positively holds hose in place and provides full circumference sealing to hold pressure up to 15 bar (220 psig) 45
TABLE OF CONTENTS by performance range
TABLE OF CONTENTS by performance range Masterflex Industrial tubing pumps Performance Ranges Pressure, psig (bar) Flow, GPM (LPM) Pages 1 2 3 4 5 6 1 5 1 15 2 L/S Easy-Load II L/S High-Performance 6 (4).9
MODEL 2002 PERISTALTIC PUMPS S E R I E S
MODEL PERISTALTIC PUMPS Features Dry pump cavity Self-priming operation Runs dry without damage Complete isolation of pumped fluid Heavy-duty roller bearings Wide range of pump configurations/flows No
PRODUCT OBSOLETED 1Q16
VIKING HEAVY DUTY PUMPS FEATURES Section 6 Page 6. Issue C 9 SERIES 27 s Cutaway View (Packed Type) 60-200-280 GPM Sizes (36-45-64 m³/hr) Shown without over-pressure relief valve MECHANICAL SEAL (SERIES
Vector Peristaltic Pump Operating Principle
Vector Peristaltic Pump Operating Principle Peristaltic pumps work by compressing and relaxing a hose positioned between a rotating device and a circular pump housing. Vector 2 Series pumps use rotating
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
F20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
SPECIFICATION DATA. 200 SERIES MOTORIZED 203, 204, 205 and 220 MODELS
Section: Page: 1 of 2 Date: March 30, 1996 SPECIFICATION DATA 200 SERIES MOTORIZED 203, 204, 205 and 220 MODELS PORT SIZES MODELS SUCTION DISCHARGE All dimensions are in inches. Specifications subject
NDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
NDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
G35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
Webster S-Series Vertical Seal-Less Immersible Pumps. Rugged, Non-metallic Chemical Duty Pumps Against a Closed Valve
Webster S-Series Vertical Seal-Less Immersible Pumps Rugged, Non-metallic Chemical Duty Pumps Against a Closed Valve Reduce Unscheduled Downtime The S-Series vertical pump is the pump to choose when unscheduled
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
G03 Mono-Block Series
G03 Mono-Block Series Maximum Flow Rate: 11.7 l/min (3.1 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads ATEX Mono-Block (G03) Shaft-driven with Stainless Steel pump head Mono-Block (G03)
69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
G04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head
G04 Series Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads ATEX G04 with Stainless Steel pump head G04 with Brass pump head G04 with Stainless Steel
Ultra-Matic Air Valve System
Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
AIR OPERATED DIAPHRAGM PUMPS
AIR OPERATED DIAPHRAGM PUMPS BULLETIN P-605 R JAN. 05 PUMP ANYTHING THAT CAN POUR SAFELY AND RELIABLY Wide selection of materials: SS - 36 stainless steel AL - Aluminum NSS - Conductive nylon ¼" - 2" sizes
G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head
G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump
INSTRUCTION MANUAL GENERAL SAFETY WARNING
INSTRUCTION MANUAL This manual forms an integral part of the pump and must accompany it until its demolition. The series AMP peristaltic pump is a machine destined to work in industrial areas and as such
INSTRUCTION MANUAL Rev
INSTRUCTION MANUAL Rev 12.04.00 PERIFLO PERISTALTIC PUMP MODELS: EQUIPMENT IDENTIFICATION RECORD PUMP MODEL NO: PUMP S/N: CUSTOMER: ORDER NO: JOB NO: TAG NO: HOSE MATERIAL: MOUNTING POSITION: CONFIGURATION:
Air Operated Double Diaphragm Pump. M-Pump ½ Metallic Non Metallic Pump INSTALLATION, OPERATION & MAINTENANCE MANUAL
Air Operated Double Diaphragm Pump M-Pump ½ Metallic Non Metallic Pump INSTALLATION, OPERATION & MAINTENANCE MANUAL 0.5 I.O.M rev 05. 12/2015 INDEX Title Section Introduction.1 Safety.2 Warranty, General
300 SERIES 30100, 30102, 30104, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 4 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 30100, 30102, 30104, AND 30105 MODELS DESIGN FEATURES Housing: Phenolic Pump Rotor: Phenolic Elastomers:
Indianapolis Chicago San Juan
Indianapolis Chicago San Juan www.hollandapt.com 800-800-8464 APV R Series Rotary Pumps Reliable Performance Sanitary, Positive Displacement Rotary Pumps APV R Series Rotary Pumps are known all over the
WARNING CAUTION. CAUTION Do not exceed 120 psig (8.3 bar) air-inlet pressure.
13966-100-BP SAFETY MANUAL READ FIRST! IMPORTANT: READ THESE WARNINGS AND SAFETY PRECAUTIONS PRIOR TO INSTALLATION OR OPER- ATION. FAILURE TO COMPLY WITH THESE INSTRUC- TIONS COULD RESULT IN PERSONAL INJURY
SERVICE MANUAL Moyno Mag Drive Series Motorized Pumps with Magnetic Drives 331, 332, 333, 344 MODELS
SERVICE MANUAL Moyno Mag Drive 500 300 Series Motorized Pumps with Magnetic Drives 331, 332, 333, 344 MODELS Section: Mag Drive 500 Pumps Page: 1 of 4 Date: January 2010 DESIGN FEATURES Housing: PVC or
Aluminum Dimensions: 7.32" W 9.49"H Net Wt.: 7.9 lbs. (3.6 kg) Shipping Wt.: 9.9 lbs. Stainless Steel
DP Series Specifications DP-10 Port Dimensions (6 GPM Max.) Intake & discharge connection: Polypropylene (PPG) 3/8" Female NPT Aluminum (ADC-12) 3/8" Female NPT Stainless Steel (316) 3/8" Female NPT DP-15
DIAPHRAGM METERING PUMPS
JANUARY 2004 DIAPHRAGM METERING PUMPS JN Series 5 Models 1-7 GPH MF Series 11 Models 5-75 GPH MH Series 5 Models 96-180 GPH Simple, Rugged and Accurate Designed For Continuous Heavy Duty Service Manufacturing,
Husky 716 Metal Pumps Air-Operated Double-Diaphragm
Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled
Designed to Handle Difficult Fluids
Designed to Handle Difficult Fluids For Processing Applications with Difficult Fluids Contents Page Introduction...3 Capabilities Overview Flow Capacities & Pressure Ratings...4 Maximum Allowable Solids
Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series
Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that
H25 Series. Maximum Flow Rate: 20.0 gpm (75.9 l/min) Maximum Pressure: 1000 psi (69 bar) for Metallic Pump Heads
25 Series Maximum Flow Rate: 2. gpm (75.9 l/min) Maximum Pressure: 1 psi (69 bar) for Metallic Pump eads 25 Series Performance apacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min 25-115
F-SERIES FDA AIR DIAPHRAGM PUMPS
F-SERIES FDA AIR DIAPHRAGM PUMPS FDA AIR DIAPHRAGM PUMPS DIMENSION FDA PUMPS FDA Grade Elastomers Electropolished and Passivated Stainless Steel Wet End Parts Oversized Tri-Clamp Connection Standard Limited
SANITARY POSITIVE DISPLACEMENT PUMPS
Capacity to 450 GPM/102 M 3/ hr Pressure to 200 PSI/14 Bar (Model 0450 to 400 PSI/27 Bar) Viscosity to 910,000 SSU (200,000 cps) Temperature -40 to 300 F (-40 to 150 C) SANITARY POSITIVE DISPLACEMENT PUMPS
Model and Series 115 VAC INDUSTRIAL DIAPHRAGM PUMPS. PumpAgents.com - buy pumps and parts online INDUSTRIAL DIAPHRAGM PUMPS
Model 31801 and 31800 Series 115 VAC INDUSTRIAL DIAPHRAGM PUMPS INDUSTRIAL DIAPHRAGM PUMPS FEATURES Run Dry Ability Self-Priming Thermal Overload Protected Motor Easy Installation Low Amp Draw Compact
SERVICE MANUAL 200 SERIES MOTORIZED 20352, 20452, 20551, 20552, AND MODELS
Section: MOYNO 500 PUMPS Page:1 of 4 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 200 SERIES MOTORIZED 20352, 20452, 20551, 20552, 22051 AND 22052 MODELS DESIGN FEATURES Housing: AISI 316 stainless
Industrial Pumping Equipment Air-Operated Diaphragm Pumps
Industrial ing Equipment -Operated Diaphragm s 85630 85628 85622 85634 ¼" - 2" -Operated s Basic Design Features Diaphragm pumps are driven by compressed air.the directional air distribution valve and
kythe Premium Pump LKH Centrifugal Pump
. kythe Premium Pump ky LKH Centrifugal Pump Applications The LKH pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical
Versa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar
Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16
G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21
ADVANCED FLUID MANAGEMENT SOLUTIONS. Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI GARANZIA WARRANTY.
ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 ANNI DI 5 YEARS WARRANTY GARANZIA Made In Italy Industrial piston pumps TECHNICAL CHARACTERISTICS Strength points
Fluid Dispensing Systems
Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028
Hydra-Cell Metering Accessories and Options
Hydra-Cell Metering Accessories and Options P Series System Illustration PULSATION DAMPENER (OPTIONAL) BACK PRESSURE VALVE RELIEF VALVE (To process) PRESSURE GAUGE CALIBRATION CYLINDER CONTROLLERS & MOTORS
DulcoFlex Peristaltic Pump: DFB13B
INSTRUCTION MANUAL DulcoFlex Peristaltic Pump: This manual forms an integral part of the pump and must accompany it until its demolition. The peristaltic pump is a machine destined to work in industrial
ProMinent Meta METERING PUMPS. ProMinent
ProMinent Meta METERING PUMPS ProMinent Compact design Easy operation and control Pump Types The ProMinent Meta is an adjustable, reciprocating positive displacement metering pump. The Meta- HM diaphragm
SANITARY/HYGIENIC NON-MOTORIZED
Section: MOYNO 500 PUMPS Page: 1 of 4 Date: March 2002 SERVICE MANUAL MOYNO 500 PUMPS SANITARY/HYGIENIC NON-MOTORIZED 331, 332, 333 AND 344 MODELS SANITARY MODELS These pumps include housings polished
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting SPECIFICATIONS
D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
DulcoFlex Peristaltic Pump DFC 50
INSTRUCTION MANUAL DulcoFlex Peristaltic Pump DFC 50 This manual forms an integral part of the pump and must accompany it until its demolition. The peristaltic pump is a machine destined to work in industrial
H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
SANITARY CENTRIFUGAL PUMPS TRA 400 Series
Capacity to 0 GPM (70 M³/hr) Pressure to 135 PSI (9.3 Bar) Viscosity to 2,700 SSU (600 cps) Temperature to 380 F (195 C) SANITARY CENTRIFUGAL PUMPS TRA 400 Series The TRA 400 Series The reliability of
kysmall, Yet Flexible
. kysmall, Yet Flexible ky Application Alfa Laval s Tri-Clover brand range of fractional valves has been designed for applications requiring a secure, sanitary or sterile environment within the food, beverage,
EN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
HIGH PURITY PTFE AIR DIAPHRAGM PUMPS
HIGH PURITY PTFE AIR DIAPHRAGM PUMPS HIGH PURITY MACHINED PTFE PUMPS PTFE PUMPS Machined PTFE Design NPT/BSP or ANSI/DIN Flange Connections 1/4, 3/8, 1/2, 1, 1-1/2, 2 Inch Sizes Available Max Temperature
NS Series Non Metallic End-Suction Centrifugal Pumps
Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND PACKING Corrosion Resistant Chemical Pumps Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND
UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
Camlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications
Snaplock Camlock Couplings The original Snaplock quick release coupling The tried & trusted cam coupling with the high reputation of the Snaplock brand name offering additional features to our standard
Process Equipment. Air-Operated Pumps for Process Industries
Process Equipment Air-Operated s for Process Industries Superior ing Technology 55 Gallon Drum Transfer and Supply from your 55 gallon drums with our double diaphragm or piston evacuation pumps. They offer
DIAPHRAGM PUMPS 3 NON-METALLIC PUMP MODEL
DIAPHRAGM PUMPS 3 NON-METALLIC PUMP MODEL EXP Series 3 Non-Metallic Diaphragm Pump ARO EXP Series diaphragm pumps now include new 3 non-metallic models available in polypropylene or PVDF. The NEW 3 non-metallic
MICROPUMP MAG-DRIVE GEAR PUMPS
MAG-DRIVE GEAR PUMPS REVISION # 1 DATE: 6-6-6 WETTED MATERIALS Pump housings: 316 stainless steel. Gears: PEEK. Gear shafts: 316 stainless steel. Gear shaft bearings: PEEK. Driven magnet: Totally encapsulated
DP Series Specifications
DP Series Specifications DP-10 Port Dimensions Intake & discharge connection: Polypropylene (PPG) Aluminum (ADC-12) Stainless Steel (316) (6 GPM Max.) 3/8" Female NPT 3/8" Female NPT 3/8" Female NPT DP-15
SP SERIES SELF-PRIMING MAG DRIVE
SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical
ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.
ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials
VIKING HEAVY DUTY PUMPS SERIES 225 AND 4225 JACKETED BRACKET, STANDARD CONSTRUCTION FEATURES
VIKING HEAVY DUTY PUMPS JACKETED BRACKET, STARD CONSTRUCTION FEATURES SERIES 5 Pumps Cutaway View 5-0-60-80-5 GPM Sizes (-7--8- m³/hr) Section Page. Issue C MECHANICAL SEAL (SERIES 5) H - LL SIZES LS -
Section G TOP-FLO SV2 Sample Valve Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries www.toplineonline.com
R Series ROTARY POSITIVE DISPLACEMENT PUMPS
R Series ROTARY POSITIVE DISPLACEMENT PUMPS SPX R Series Rotary Pumps are known all over the world for their rugged, long lasting design and efficient performance. Backed by a worldwide sales, engineering
DulcoFlex Peristaltic Pump DFDa70
INSTRUCTION MANUAL DulcoFlex Peristaltic Pump DFDa70 This manual forms an integral part of the pump and must accompany it until its demolition. The peristaltic pump is a machine destined to work in industrial
Viking SL Industrial Lobe Pump Series
Section 288 Page 288. Viking SL Industrial Lobe Pump Series This product brings gentle low shear pumping action with in-line cleaning capabilities to the industrial markets. Rugged enough for corrosive
Operating instructions. RBT Series Peristaltic Pump
Operating instructions RBT Series Peristaltic Pump Table of contents 1. Introduction... 3 2. Safety and Responsibility... 5 3. Functional description... 9 4. Transport and Storage... 11 5. Assembly and
INDUSTRIAL DYEING PUMPS
INDUSTRIAL DYEING PUMPS ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI WARRANTY GARANZIA Made In In Italy HELP THE NATURE Packaging contains, depending
Bulk Chemical Pumps. Model 1100 Series Pumps. TOTE PUMP & GO KIT The Most Versatile, Dependable Liquid Transfer Pump You Will Ever Own PUMPS
BULK CHEMICAL 0 Bulk Chemical Pumps Model 00 Series Pumps New from SHURflo, the rugged 00 Series General Utility Transfer Pump is a highly-efficient, VDC, Positive-displacement pump. This Self-Priming,
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
V6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012
BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent
3/4" DIAPHRAGM PUMP SERVICE KITS PUMP DATA MODEL DESCRIPTION CHART PD07R - X A S - X X X
OPERATOR S MANUAL PD07X-X-X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 2-20-07 REVISED: 5-21-10 (REV. 04) 3/4" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
M03 Series. Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 1200 psi (83 bar) for Metallic Pump Heads
M3 eries Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 12 psi (83 bar) for Metallic Pump Heads M3 eries Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Maximum Inlet Pressure Model
SERVICE KITS PUMP DATA MODEL DESCRIPTION CHART INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED:
OPERATOR S MANUAL PD10E-X-X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 6-15-05 REVISED: 7-15-16 (REV. G) 1 DIAPHRAGM PUMP 1:1 RATIO (CONDUCTIVE NON-METALLIC) READ THIS MANUAL CAREFULLY
DulcoFlex Peristaltic Pumps: DFB010 DFB013 DFB016 DFB019 DFB022
INSTRUCTION MANUAL DulcoFlex Peristaltic Pumps: DFB010 DFB013 DFB016 DFB019 DFB022 This manual forms an integral part of the pump and must accompany it until its demolition. The peristaltic pump is a machine
ProMinent Beta Solenoid Diaphragm Metering Pumps
Overview: Beta Ideal for basic chemical feed applications (see page 127 for spare parts, page 138 for accessory kits and page 138 for control cables) ProMinent pk_1_004_1 Capacity range 0.2-8.4 gph, 232-29
1-800-MASTERFLEX ( ) (U.S. and Canada only) 11 (847) (Outside U.S.) (847) (Local)
OPERATING MANUAL BARNANT/PONNDORF HOSE PUMPS NOTICE D UTILISATION POMPES TUBULAIRES BARNANT/PONNDORF Hose Pump and Motor Pompe tubulaire et moteur Schlauchpumpe und Motor Bomba de manguera y motor BEDIENUNGSANLEITUNG
SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
ISTEC MAGNETIC METERS
ISTEC MAGNETIC METERS MEASURE ANY CONDUCTIVE LIQUIDS OR SLURRIES (EVEN ABRASIVE OR CORROSIVE) WITH THE NEW MICROPROCESSOR-BASED MAGNETIC METER -- A QUALITY PRODUCT - SIMPLE - RELIABLE - AT AN AFFORDABLE
OPERATOR S MANUAL A
OPERATOR S MANUAL 670144-A INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 12-18-15 1/4" DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) (REV: A) 67 0144-A READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATOR S MANUAL
OPERATOR S MANUAL 670093 INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 7-7-09 REVISED: 9-15-11 (REV. 07) 1/2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) 670109 READ THIS MANUAL CAREFULLY BEFORE
ProMinent delta Solenoid Diaphragm Metering Pumps
Overview: delta Ideal for applications requiring metering pump accuracy with minimal pulsation (see page 127 for spare parts and page 134 for control cables) Continuous or pulsating dosing Configurable
SERVICE MANUAL 200 SERIES MOTORIZED 20352, 20452, 20551, 20552, AND MODELS
Section: MOYNO 500 PUMPS Page:1 of 4 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 200 SERIES MOTORIZED 20352, 20452, 20551, 20552, 22051 AND 22052 MODELS DESIGN FEATURES Housing: AISI 316 stainless
1 FDA SANITARY DIAPHRAGM PUMP 1:1 RATIO (METALLIC)
OPERATOR S MANUAL SX10X-XXX-XXX-AXXXX INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 9-10-14 (REV. A) 1 FDA SANITARY DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
6" Steel Model G6. Smith Meter Rotary Vane PD Meters. Features. Operating Specifications Maximum Flow Rate. Options
SPECIFICATIONS 6" Steel Model G6 Bulletin SS01014 Issue/Rev. 1.0 (4/18) Smith Meter Rotary Vane PD Meters The Smith Meter Model G6 Meter is a 6", double-case, straight-through rotary vane type positive
VIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS
Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,
OPERATOR S MANUAL SX20X-XXX-XXX-AXXXX INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED:
OPERATOR S MANUAL SX20X-XXX-XXX-AXXXX INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 11-28-14 (REV. A) 2 FDA SANITARY DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
Series SMR Sanitary Stainless Steel Multi-Round Housing
Features: Aseptic Design Low Hold Volume Easy to use low point drain valve Benefits: No Dead Legs Fully Self draining Ease of filter change-out Removable for Cleanability Maximize Product Recovery Crevice
OPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 2 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 50 BOLTED. A JDA Global Company
OPERATION MANUAL 2 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 50 BOLTED AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company CAUTIONS - READ FIRST CAUTION: Do not apply compressed air
SERVICE KITS PUMP DATA MODEL DESCRIPTION CHART INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED:
OPERATOR S MANUAL SX10X-XXX-XXX-AXXXX INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 9-10-14 REVISED: 10-16-15 (REV: D) 1 FDA SANITARY DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY
OPERATOR S MANUAL SX20X-XXX-XXX-AXXXX
OPERATOR S MANUAL SX20X-XXX-XXX-AXXXX INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 11-28-14 REVISED: 10-16-15 (REV: B) 2 FDA SANITARY DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL
OPERATOR S MANUAL SERVICE KITS PUMP DATA MODEL DESCRIPTION CHART INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED:
OPERATOR S MANUAL 670097 INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 2-2-10 REVISED: 10-16-15 (REV. H) 3" DIAPHRAGM PUMP 1:1 RATIO (METALLIC) READ THIS MANUAL CAREFULLY BEFORE INSTALLING,