S40 Series. - 1/4" NPT - Stainless Steel Body - 2-Way Piloted Piston - Normally Open. Dimensions/Weight
|
|
|
- Juniper Tucker
- 5 years ago
- Views:
Transcription
1 S40 Series - " NT - Stainless Steel Body - 2-Way iloted iston - Materials Seals: Nitrile, Viton, Teflon, Ethylene ropylene Orifice: ilot Stainless Steel Main Stainless Steel Ø 3/8 Electrical Standard Housing: Encapsulated Waterproof Conduit (NEMA 4/4X) Optional Housings: Metallic Conduit, Explosion-proof (NEMA 7), Grommet, Open Frame, Junction Box (single or dual knockouts), DIN; Contact GC Valves Customer Service for others. Standard Voltages: 24, 120, 240 AC 60 Hz; 50 Hz available 6, 12, 24 DC; Contact GC Valves Customer Service for Additional Voltages. Voltage Tolerance: ±10% of applicable voltage Coil Classes: F, H, N Standard Lead Length: 24 inch Operating Temperature Ambient (Nominal): 32 F to 125 F Mounting osition: Any Approvals* Agency: UL Listed, UL Recognized, CSA Approved * Not available for all variations Dimensions/Weight Registered Trademark of Duont Co. Weight (lbs.) 1.8 GC Valves Customer Service: (7:30am to 4pm ET) or (7:30am to 4pm T) -S-402-1
2 S402 " NT, Stainless Steel Body, Valve Selection List Energized De-Energized ipe Size NT Minimum Operating ressure Differential (psi) Maximum #5 and #6 Air/Gas Water Heated Steam* Fuel Oil IN C v AC DC AC DC AC DC AC DC F AC DC Stainless Steel Body 3/ ER S402GF02C1BF5 3/ Nitrile S402GF02N1BF5 3/ Viton S402GF02V1BF5 Max Fluid Temp. 3/ Teflon S402GF02T1BF5 3/ * 50* 295 ER** S402GH02E1BF5 3/ * 150* 366 Teflon** 10 9 S402GH02S1BF5 * Class H Coil Recommended for Steam and Other High Temperature Applications art Numbering Seal Material ower Consumption (Watts) Model Code ( ) 120V/60HZ 110V/50HZ Shown S G F 0 2 C 1 B F 5 Series S40 Operating Mode 2: Normally Open Housing* Coil Class* Voltage* G: Conduit F: Class F H: Class H 02: 120/60 110/50 Seal Material C: ER N: Nitrile V: Viton T: Teflon E: ER** S: Teflon** Body Material 1: Stainless Steel * See the Engineering Guide for additional voltages, variations and options. ipe Connection B: NT F5: 3/8 Coil Data **For Steam Service Coil Family Type Size All S4 Frequency (Hz) Nominal ower (VA) Inrush Holding S GC Valves Customer Service: (7:30am to 4pm ET) or (7:30am to 4pm T)
3 Western Region Eastern Region 4525 E. Industrial St., Unit 4C 456 Crompton St. Simi Valley, CA Charlotte, NC hone: (800) hone (800) Fax: (805) Fax: (704)
4 S30 Series " NT Stainless Steel Body 2-Way Direct Acting Materials Seals: Nitrile, Viton, Ethylene ropylene, Teflon, Rulon Orifice: Stainless Steel Electrical Standard Housing: Encapsulated Waterproof Conduit (NEMA 4/4X) Optional Housings: Metallic Conduit, Explosion-proof (NEMA 7), Grommet, Open Frame, Junction Box (single or dual knockouts), DIN; Contact GC Valves Customer Service for others. Standard Voltages: 24, 120, 240 AC 60 Hz; 50 Hz available 6, 12, 24 DC; Contact GC Valves Customer Service for Additional Voltages. Voltage Tolerance: ±10% of applicable voltage Coil Classes: F, H, N Standard Lead Length: 24 inch Operating Temperature Ambient (Nominal): 32 F to 125 F Mounting osition: Any Approvals* Agency: UL Listed, UL Recognized, CSA Approved * Not available for all variations Dimensions/Weight Registered Trademark of Duont Co. Weight (lbs.) 1.1 GC Valves Customer Service: (7:30am to 4pm ET) or (7:30am to 4pm T) -S-302-1
5 S302 " NT, Stainless Steel Body, Valve Selection List Energized De-Energized ipe Size NT Minimum Operating ressure Differential (psi) Maximum Air/Gas Water Light Oil Steam* Max Fluid Temp. in. C v AC DC AC DC AC DC AC DC F AC DC 1/ * 150* 295 ER S302GF02C3BC1 3/ * 150* 295 ER S302GF02C3BC3 1/ * 150* 295 ER S302GF02C3BC5 5/ * 150* 295 ER S302GF02C3BC7 3/ * 150* 295 ER S302GF02C3BC9 7/ * 125* 295 ER S302GF02C3BD3 1/ * 100* 295 ER S302GF02C3BD5 5/ * 60* 295 ER S302GF02C3BD7 3/ * 40* 295 ER S302GF02C3BE1 1/ Nitrile S302GF02N3BC1 3/ Nitrile S302GF02N3BC3 1/ Nitrile S302GF02N3BC5 5/ Nitrile S302GF02N3BC7 3/ Nitrile S302GF02N3BC9 7/ Nitrile S302GF02N3BD3 1/ Nitrile S302GF02N3BD5 5/ Nitrile S302GF02N3BD7 3/ Nitrile S302GF02N3BE1 1/ Viton S302GF02V3BC1 3/ Viton S302GF02V3BC3 1/ Viton S302GF02V3BC5 5/ Viton S302GF02V3BC7 3/ Viton S302GF02V3BC9 7/ Viton S302GF02V3BD3 1/ Viton S302GF02V3BD5 5/ Viton S302GF02V3BD7 3/ Viton S302GF02V3BE1 * Class H Coil Recommended for Steam and Other High Temperature Applications Seal Material ower Consumption (Watts) Model Code ( ) 120V/60HZ 110V/50HZ Shown Stainless Steel Body -S GC Valves Customer Service: (7:30am to 4pm ET) or (7:30am to 4pm T)
6 S302 " NT, Stainless Steel Body, Valve Selection List Energized De-Energized ipe Size NT Minimum Operating ressure Differential (psi) Maximum Air/Gas Water Light Oil Steam* Max Fluid Temp. in. C v AC DC AC DC AC DC AC DC F AC DC 1/ * 150* 366 Rulon S302GF02R3BC1 3/ * 150* 366 Rulon S302GF02R3BC3 1/ * 150* 366 Rulon S302GF02R3BC5 5/ * 150* 366 Rulon S302GF02R3BC7 3/ * 150* 366 Rulon S302GF02R3BC9 7/ * 125* 366 Rulon S302GF02R3BD3 1/ * 100* 366 Rulon S302GF02R3BD5 5/ * 60* 366 Rulon S302GF02R3BD7 3/ * 40* 366 Rulon S302GF02R3BE1 1/ * 150* 366 Teflon S302GF02T3BC1 3/ * 150* 366 Teflon S302GF02T3BC3 1/ * 150* 366 Teflon S302GF02T3BC5 5/ * 150* 366 Teflon S302GF02T3BC7 3/ * 150* 366 Teflon S302GF02T3BC9 7/ * 125* 366 Teflon S302GF02T3BD3 1/ * 100* 366 Teflon S302GF02T3BD5 5/ * 60* 366 Teflon S302GF02T3BD7 3/ * 40* 366 Teflon S302GF02T3BE1 * Class H Coil Recommended for Steam and Other High Temperature Applications Seal Material ower Consumption (Watts) Model Code ( ) 120V/60HZ 110V/50HZ Shown Stainless Steel Body GC Valves Customer Service: (7:30am to 4pm ET) or (7:30am to 4pm T) -S-302-3
7 S302 " NT, Stainless Steel Body, art Numbering S G F 0 2 C 3 B C 1 Series Operating Seal Body ipe Housing* Coil Class* Voltage* Mode Material Material Connection S30 2: Normally Open G: Conduit F: Class F H: Class H 02: 120/60 110/50 C: ER N: Nitrile V: Viton R: Rulon T: Teflon 3: Stainless Steel B: '' NT C1: 1/32'' C3: 3/64'' C5: 1/16'' C9: 3/32'' D5: 1/8'' E1: 3/16'' * See the Engineering Guide for additional voltages, variations and options. Coil Data Coil Family Type Size All S4 Frequency (Hz) Nominal ower (VA) Inrush Holding S GC Valves Customer Service: (7:30am to 4pm ET) or (7:30am to 4pm T)
S21 Series. - 1" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 1" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 Electrical Standard Housing: Encapsulated Waterproof Conduit
S21 Series. - 2" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 2" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 1/4 Electrical Standard Housing: Encapsulated Waterproof
2/2 ^ % ) Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.
4 ilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" 8210 2-AY Features ide range of pressure ratings, sizes, and resilient materials provide long service life
Data sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472
Data sheet 2-way solenoid valves with Clip-on coils for neutral liquids and gases January 200 DKACV.PD.200.K.22 520B472 2 DKACV.PD.200.K.22 Danfoss A/S 0-200 Contents 2-way solenoid valves with Clip-on
SV321 & SV Way Normally Closed and Normally Open Pilot Operated Solenoid Valves
SV321 & SV421 2-Way and Pilot Operated Solenoid Valves Valcor General Purpose Series ESRIPTION pplication Features These 2-way piloted diaphragm solenoid valves are available in normally closed and normally
4 qwer 2/2. Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.
4 qwer Pilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Wide range of pressure ratings, sizes, and resilient materials provide
2-Way/2 Position Valves
4 2-Way/2 Position Valves Two-way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. Two Types of Operations Apply Normally Closed (NC) Fluid is shut off when
3 Way/2 Position Valves
Way/ Position Valves Three way valves have three pipe connections and two orifices. When one orifice is open, the other is closed, and vice versa. They are commonly used to alternately apply pressure to
3-Way Solenoid Valve - Direct Acting
3-Way Solenoid Valve - Direct Acting General application valves for dry or lubricated air, neutral gases and liquids Description: Applications: 3-Way Solenoid Valve - Direct Acting - Normally Closed. Coil
Engineering Information. Solenoid Valves Principles of Operation. Solenoid Valves. Direct Acting Valves (Figures 1A, 1B)
4 Engineering Information Principles of Operation A solenoid valve is a combination of two basic functional units: A solenoid (electromagnet) with its core A valve body containing one or more orifices
/2. Hot Water and Steam Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT ^ % )
888-87-6711 Normally Closed or Normally Open ot Water and Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT Features ot water service to 210 psi differential @ 210 F; sevice to 125 psi differential
2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
High Pressure Solenoid Valves
High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, Hydrogen & other High Pressure Gases High Pressure Cryogenics Flammable Liquids
% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT
Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NT / 3/ / 5/ 5/3 Features Available in different coil terminations H Class coil construction Designed
2/2 ) % ) % ) Assemblies. Solenoid and Piloted Piston Valve Series Condensate Drain Valve Assemblies. Brass or Stainless Steel Bodies 1/4" to 1" NPT
4 Solenoid and Piloted Piston Series Condensate Drain Brass or Stainless Steel Bodies 1/4" to 1" NPT 2/2 Features Designed to automatically drain condensate in compressed air systems Piloted piston assemblies
Refrigeration Solenoid Valves & 3-Way Heat Reclaim Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Refrigeration Solenoid s & 3-Way Heat Reclaim s Catalog D-1, May 2010
VA-640GSX024P. Overview. Applications. Features & Benefits. Datasheet. Large Globe Valve Actuators
VA-640GSX024P Datasheet Large Globe Actuators Overview The VA-640GSX024P Electronic valve actuators receive a 0 to 10 VDC or 4 to 20 ma control signal to proportionally control the valve. Applications
82610/ /2-way seat valves
> > ort size: DN 1,5... 5, 1/8... 3/8 (ISO G/NT) > > Suitable for vacuum > > High flow rate > > Functional compact design > > Solenoid interchangeable without tools (c) > > Valve operates without pressure
High Pressure Valves
High Pressure Valves Available from BetaValve.com 01494 459 511 Sales@betavalve.com Park House Business Centre, Desborough Park Road, High Wycombe Bucks HP12 3DJ Series 119 Solenoid valve 2 way normally
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
SOLENOID VALVES no voltage release (tamperproof) manual reset construction 1/4
SOLENOID VALVES no voltage release (tamperproof) manual reset construction 1/4 U 2 1 3 3/2 Series 327 FEATURES The valves are certified according to IEC 61508 Functional Safety data and have SIL-3 capability
Coils for solenoid valves REFRIGERATION AND AIR CONDITIONING. Technical leaflet
REFRIGERATION AND AIR CONDITIONING Technical leaflet 2 RD3JE402 Danfoss A/S, 01-2005 Introduction The coils are specially designed to operate in the aggressive environment of high humidity and temperature
Control & Power, Inc
Way/ 2 and 3 Position Four ported valves are generally used to operate double-acting cylinders or actuators. They have four or five pipe connections, commonly called ports: One pressure inlet. Two cylinder
Directional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
Directional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
4 qwer. Steam and Hot Water Valves 2/2 SERIES. Hot Water/ Steam. Features. Construction. Nominal Ambient Temperature Ranges: Electrical.
qwer Normally Closed or Normally Open and Hot Water Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Handle the challenges of high-temperature fluids. PTFE and EPDM discs,
DE- OUT OUT DE- OUT OUT DE- SERIES MODEL E21 2-WAY NORMALLY OPEN CONDUIT HOUSG (700) 235 (0) 1 (3) (1) (700) 235 (0) 1 (3) (1) E21G7XC
SPECIFICATIONS 2-WAY 3-WAY EXPLOSION PROOF VALVES OPERATG CONDITIONS Media: Air, water, and other fluids, compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special
4 qwer. Main Pulse Valves Dust Collector 2/2 SERIES H OME PAGE P RINT. High Flow. Aluminum Bodies Air and Inert Gas 3/4" to 3" NPT.
4 qwer High Flow Main Pulse Valves Aluminum Bodies Air and Inert Gas 3/4" to 3" NPT NC 2/2 SERIES Features Specially designed for reverse jet-type dust collector systems. High flow Cv s to 140 for effective
3/3 servo directional control valve with mechanical position feedback
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical () 426-4 www.cmafh.com 3/3 servo directional control valve with mechanical position feedback Type 4WS2EM...XN...-114
SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1
SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1 NC 2/2 Series 220 FEATURES Small compact d valves particularly designed for hot water and steam, compatible with the seal materials
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series inline inline hazardous location Manifold mounting 35 sub-base non plug-in sub-base with pressure regulators sub-base hazardous
Solenoid valves Type EVU for fluorinated refrigerants
Data sheet Solenoid valves EVU for fluorinated refrigerants EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied
% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
4.55 Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 low wattage coil Standard ambient
2/2 ^ % ) Normally Closed or Normally Open Hot Water and Steam Valves. Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT
Normally Closed or Normally Open Hot Water and Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT 2/2 Features Handle the challenges of high-temperature fluids PTFE and EPDM discs, stainless steel
How to order (see coil section for part numbering charts)
How to order (see coil section for part numbering charts) Valves using Coil Charts 1-6 (Gold Ring Series Valves) Step 1: Select the pressure vessel catalog number based on the application requirements.
DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
VALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
SOGEAC SOLENOID VALVE NASS MAGNET: SYSTEM 8. s.r.l.
With pleasure we introduce on the Italian market SYSTEM 8, produced NASS MAGNET of solenoid valve that thanks to their modularity give the possibility of a wide range of easy solutions. The solenoid valve
INSTALLATION INSTRUCTION MANUAL
INSTALLATION INSTRUCTION MANUAL LED FLOOD LIGHT, 100-277VAC MODELS: SL923FLF-15W; SL923FLF-30W; SL923FLF-50W; SL923FLF-80W; SL923FLF-100W; SL923FLF-150W; SL923FLF-300W Model number parameter list: Model
Specification. Bore No.
MVSD-180 Series Specification Bore No. Medium Operating perssure range Operating pressue () External pilot pressure () Proof pressure Effective orifice Ambient temperature Reponse time Weight E1 E 4E1
86740/ /2-way piston valves
> > ort size: DN 8... 50, G1/4... 2 (ISO G/NT) > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > Damped operation > > Valve piston with TFE guide-ring Technical
SOLENOID VALVES direct operated core disc 1/4
SOLENOI VLVES direct operated core disc /4 N U NO / Series 4 FETURES ompact valve intended for single-acting actuator control Epoxy moulded coil for general service applications oils interchangeable without
Solenoid coil Types BB, BE, BF, BG, and BN
Data sheet Solenoid coil Types BB, BE, BF, BG, and BN The coils are specially designed to operate in the aggressive environment of high humidity and temperature fluctuations that you find in most refrigeration
Direct-acting 2/2- or 3/2-way pivoted armature valve
0330 Direct-acting 2/2- or 3/2-way pivoted armature valve Direct-acting, media-separated valve with diameter of up to DN 5 Maintenance-free pivoted armature technology Vibration-proof, block screwed coil
/ 3/ 4/ 5/ 5/3 4 Nominal Ambient Temp. Ranges Series Body Material Normal Temperature Range High Ambient Temp Version 8553 Stainless Steel -4 F to 4 F
4.55 Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 low wattage coil Standard ambient
CONTROLLERS & SPECIAL VALVES
CONTROLLERS & SPECIAL VALVES G75-C 1, 2 & 4 Valve Controllers.... 70 G75-C-1W & 1W+ Window Controller... 72 G75-DP Differential Pressure Switch.....................................................................
MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
Solenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
Coils for solenoid valves
MAKING MODERN IVING POSSIBE Data sheet Danfoss solenoid valves and coils are usually ordered separately to allow maximum flexibility, enabling you to select a valve and coil combination to best suit your
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
385 & 962 Series The lectroaire valve is a compact, air operated, electrically lectroaire valves can be remotely mounted for control of double acting
Model Number Index Housing Series Type ort Variation Voltage 962 2 001 40 Series Solenoid Operated Housing Type 962 Valve less racket 972* Valve less racket 902 Valve less racket 385 Valve with racket
P2050S-030, 1/2, Electronic Pressure Independent Valve Stainless Steel Ball and Stem, Female NPT Ends
P2050S-030, 1/2, Electronic Pressure Independent Valve Stainless Steel Ball and Stem, Female NPT Ends Application Water-side control of heating and cooling systems for AHUs and water coils. Equal Percentage/
% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.
Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high flow
Technical Data Sheet
Technical Data Sheet Type 52 2/2-way solenoid valve NC - Valve normally closed (as standard) NO - Valve normally open (as option) Direct operated piston design valve. No differential pressure is necessary
MULTIFUNCTION SPOOL VALVES air operated and solenoid air operated G3/4-G1 - ISO 5599/1 subbase-mounted body
MULTIFUNCTION SPOOL VALVES air operated and air operated G/-G - ISO 99/ subbase-mounted body /-/ Series Type ISO size MULTIFUNCTION Multifunction selector The multifunction selector is equipped with pilot
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
Indirect servo-operated 2/2-way solenoid valves Type EV220W 10 - EV220W 50, NBR and EPDM versions
Data sheet Indirect servo-operated 2/2-way solenoid valves Type EV220W 10 - EV220W 50, NBR and EPDM versions EV220W is a range of compact indirect servo- operated 2/2 way solenoid valves with connections
Solenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
Poppet Valves Series. Keeping the World Flowing
Poppet Valves 750 Series Keeping the World Flowing Contents Section Page Introduction 750 Series Poppet Valve Pilot operated 4 /4 to / Pilot operated 5 /4 to Pilot operated 6 Pilot operated 7 /4 to / Pilot
SOLENOID VALVES 1. GENERAL PURPOSE VALVES ACCESSORIES ORDER CODIFICATION : TEC22 DIRECT ACTING INDIRECT ACTING
S 1. GENERAL PURPOSE VALVES DIRECT ACTING ACCESSORIES CONNECTORS FOR COILS (Protection class IP65) by DIN 43650 ADJUSTABLE TIMER to preset DUTY CYCLE A "TEST" button is provided and 2 leds are used to
3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
深圳市永旭伟业贸易有限公司 SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, 1/4.
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, / / Series FEATURES The monostable spool valves, series, have TÜV certifi ed IEC 60 Functional
Solenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
82170/ /2-way diaphgram valves
> > ort size: DN 8... 50, G1/4... 2 (ISO G/NT) > > For high contaminated fluids > > Solenoid hermetically sealed from fluid > > Compact valve for industrial applications > > Small dimension > > Vacuum
5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in. Flow characteristics (1) 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Plug-in/Non Plug-in Model 2 position 3 position
Discrete direct acting 3 port solenoid valve (general purpose valve) AG31/AG41 Series. Universal type Port size: Rc1/8, Rc1/4, Rc3/8
G3141 Series iscrete direct acting 3 port solenoid valve (general purpose valve) G31/G41 Series Universal type Port size: Rc1/8, Rc1/4, Rc3/8 JIS symbol G31/41: Universal type COM NO NC Common specifications
Solenoid coil for control in potentially explosive areas Type BZ
Data sheet Solenoid coil for control in potentially explosive areas Type BZ BZ is a solenoid coil with ATEX / IECEx approval, applicable for zone 1 and 2 Ex environments. The coils are designed to be used
5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Series VFS2000 Model 2 position 3
/2-way piston valves
> > ort size: DN 15... 100, Flange connection, ressure rating N 40 > > djustable: Damped operation () > > Valve operates without differential pressure (Zero delta ) > > Valve piston with TFE guide-ring
Fluid Control Contents
Fluid Control Contents Solenoid Valves with Differential ressure Series Material ressure Temperature Function age 8410 Brass 1/4" NT - " NT 1.45 to 3 psi 194 F / - 8680 Brass 1/4" NT - 1" NT 1.45 to 145
earth safe Fuel Systems for Critical Power
Fuel System Control Valves 100 Solenoid Valves 110 Solenoid Valve Slow Close 120 Actuated Ball Valves 123 Actuated Ball Valves 3-Way 130 Actuated Butterfly Valves 140 Fire Safety Fusible Link Valves 145
Contents. Series Material Connection Pressure Temperature Function Page. Microsol PPS, PA, Stainless steel Subbase 0-10 bar +30 C 2/2, 3/2 18
Contents Solenoid Valves with Differential ressure - Miniature Solenoid Valves Series Material ressure Temperature Function age Microsol S,, Stainless steel Subbase 0-10 bar +30 C /, 3/ 18 Solenoid Valves
Totally Sealed Hour Meter
Totally Sealed Pictures not shown to scale for clarity The Redington Model 711/731 provides a family of compact 7 figure, AC or DC s. The totally sealed case protects against the environment and provides
2/2- and 3/2-way solenoid valve for aggressive fluids
2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,
Discrete direct acting 3 port solenoid valve (general purpose valve) Universal type Port size: Rc1/8, Rc1/4, Rc3/ to to 60 B
G31/41 Series iscrete direct acting 3 port solenoid valve (general purpose valve) G31/41 Series Universal type Port size: Rc1/8, Rc1/4, Rc3/8 Refer to nding 17 for more details. JIS symbol G31/41: Universal
Constructions Suitable for -40 C to -50 C Ambient
Constructions Suitable for -40 C to -50 C Ambient 2, 3 and 4 Way Constructions Available Brass and Stainless Steel Bodies Air and Inert Gas Service AIR/INERT GAS QUALITY STATEMENT FOR LOW AMBIENT VALVES
Solenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
SOLENOID VALVES direct operated core disc 1/4
SOLENOI VLVES direct operated core disc / N U NO / Series 70 FETURES Three-way solenoid valves with orifice and pipe connections in valve body enabling convenient installation ompact valve intended for
General Purpose Two-Way Direct Lift and Pilot Operated Valves. Compatible Fluids
SKINNER 7000 Series General Purpose Two-Way Direct Lift and Pilot Operated Valves IN THIS SECTION : 7221, 7222, 7321, 7322, 7423 SPECIFICATIONS Mechanical Characteristics Standard Materials of Construction
9012G Pressure and 9016G Vacuum Switches
Selection Guide 90G and 906G Vacuum Switches Type of installation Control circuits Power circuits Applications Media controlled Type of operation Air, water, hydraulic oils, () gases, steam Fixed differential:
Type Type 1001 Transducers. I/P & E/P Transducers
Type 1001 I/P & E/P Description The Type 1001 is a patented family of electropneumatic instruments that is used to reduce a supply pressure to a regulated output pressure which is directly proportional
Solenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
Direct-acting 2/2-way plunger valve
Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding
5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 Ma ilot Operated /3 ort Solenoid Valve & Check Valve Series VCH VCH4/4: ort VCH40: 3 ort VCHC40: Check Valve ilot Operated ort Solenoid Valve [Option] Series VCH40 Stable responsiveness Response time
VALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
STC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
EVI 5 S13 Solenoid System
EVI 5 S13 Solenoid System The EVI5 S13 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 13
PARKER SOLENOID VALVES GENERAL PURPOSE SOLENOID VALVE SOLENOID COILS FOR GENERAL PURPOSE VALVES PARKER GP SERIES
SOLENOID VALVES GENERAL PURPOSE SOLENOID VALVE GP SERIES PART NO MODEL NO PORT SIZE CONNECTIONS (in FPT) SHIP WT (lb) 70221 GP200 5/16.98 1/4 0.75 70222 GP207 5/16.98 1/4.075 70223 GP257 5/16.98 1/4.075
3-Way. Direct Acting & Pilot Operated Quick Exhaust Valves 1/4" - 3/8" NPT. General Description: Applications: Electrical Characteristics:
Direct Acting & Pilot Operated Quick Exhaust Valves 1/4" - 3/8" General Description: Direct Acting & Pilot Operated Quick Exhaust Valves are designed to provide a large orifice for quick exhaust. Increased
DIRECTIONAL CONTROL VALVES CETOP 3/NG6
CETOP 3/NG06 STANDARD SPOOLS CH. I PAGE 0 AD.3.E... CH. I PAGE AD.3.E...J* CH. I PAGE 2 AD3.XS... CH. I PAGE 3 AD3.XD... CH. I PAGE 4 AD.3.V... CH. I PAGE 5 AD.3.L... CH. I PAGE 6 OTHER OPERATOR CH. I
3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface
3/ Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface Suitable for instrumental air, neutral gaseous and liquid fluids and
Powers TM Controls Three-way Electro-pneumatic (EP) Valve Model 2
Powers TM Controls Three-way Electro-pneumatic (EP) Valve Model 2 Document No. 155-078P25 VE 265-2 Description The VE 265 Electro-Pneumatic Valve is a general purpose, electrically operated, twoposition
Operation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
Mid-West Instrument. Piston Type Differential Pressure Gauges Switches & Transmitters Model 120
BULLETIN NO. 120/11 (SUPERSEDES BULLETIN NO. 120/02) Piston Type Differential Pressure Gauges Switches & Transmitters A low cost differential pressure gauge for use in measuring the pressure drop across
Solenoid System. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex na II 3 GD T4 or T5).
EVI 7 S9 Solenoid System The EVI7 S9 system by AMISCO includes a wide range of solenoids, coils and operators, designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter
Solenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and servo operated versions, they can be applied in liquid, suction, and hot
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up