MICRO SWITCH HDLS Series

Transcription

1 MICRO SWITCH HDLS Series Heavy-Duty Limit Switches DESCRIPTION Honeywell Sensing and Control s MICRO SWITCH heavy-duty limit switches modular construction allows for a wide variety of actuator styles, operating heads, and electrical circuitry options. The plug-in versions greatly reduce downtime on high production lines as replacement of the switch is accomplished in seconds. The base receptacle contains all the wiring and conduit connection while the switching component with operating head easily assembles to the base and is attached with two screws. FEATURES AND BENEFITS Rugged, zinc die-cast housings with epoxy coating for indoor and outdoor applications Sealed to NEMA 1,,, X, 6, 6P, 1, 1; IP 65/66/67 Full complement of bodies and head styles for design flexibility Wide variety of actuators and electrical circuitry options available Conduit options available for global applications Rotary actuated heads are field adjustable for CW actuation, CCW actuation or both to reduce inventory Keyed head design for secure head-to-body retention and 90 degree head rotation Plug-in and non plug-in bodies have identical operating characteristics and dimensionally interchangeable Actuating levers for single and double pole, plug-in and non plug-in bodies provide same tracking and minimize inventory UL, CSA, CE, and CCC for global use Fluorosilicone seals available for low temperature applications Fluorocarbon seals available for chemically harsh environments and higher temperature applications. Self-lifting pressure plate terminals saves wiring time APPLICATIONS Material handling Balers/compactors Automotive machine tools Conveyors Food & beverage machinery Machine tools Power plants Off-road equipment Agricultural equipment Valves Shipboard and dockside TABLE OF CONTENTS Features and options... General specifications... Operating head descriptions Special options Side rotary switches Top rotary switches Levers Cam tracking...17 Plunger switches Wobble switches Special applications... - MICRO SWITCH HDLS nomenclature...5 MICRO SWITCH HDLS listings Series variations...8

2 MICRO SWITCH HDLS Series Figure 1. MICRO SWITCH HDLS SERIES FEATURES AND OPTIONS Boss-and-socket head design for secure head-to-body retention. Dual bearings deliver enhanced mechanical life. Sintered bronze bearing on 0 stainless steel operating shaft for enhanced mechanical life and operational reliability. Twin shaft seals for an extra measure of protection. Optional fluorocarbon or fluorosilicone seals. Tracking interchangeability of actuator levers for singleand double-pole switches, plug-in and non-plug-in. Exclusive teller tab ensures proper torque. When it cannot be moved, the lever is tight enough to prevent slippage. Self-lifting pressure plate terminals save wiring time. Easily identified grounding terminal (inside) for compliance with regulatory standards. Domestic and international conduit threads. Diaphragm seal for exta measure of protection. Rugged, corrosionresistant zinc head and body are phosphate treated and epoxy coated. Unique, all-metal drive train for consistent operating characteristics even at high temperature; lasts longer (without the need for frequent adjustment) than drive trains with plastic parts. One piece flat gasket: seals better than gaskets that go around curves and corners. Does not contact the terminals pins to reduce possibility of fluid migration. Front mounting and interchangeability of single- and double-pole switches, plug-in and non-plug-in with one another and with other switch brands. Each switch has four mounting holes; two through holes for front mount, and two tapped holes in back for rear mount Honeywell Sensing and Control

3 Heavy Duty Limit Switches Table 1. General MICRO SWITCH HDLS Series Specifications Characteristic Product Type Parameter MICRO SWITCH Heavy-Duty Limit Switches Actuators Side plunger - adjustable Side plunger - pin Side plunger maintained - pin Side roller plunger Side rotary Side rotary maintained Top plunger - adjustable Top plunger - pin Top roller plunger Top rotary Wobble - cable Wobble - cat whisker Wobble - coil spring Wobble - plastic rod Wobble - spring wire Circuitry 1NC 1NO SPDT snap action, double break NC NO DPDT center neutral, snap action, double break NC NO DPDT snap action, double break NC NO DPDT sequential, snap action, double break Electrical 10 A thermal Single and double pole: AC15 A600; DC1 R00 Housing Material Zinc die-cast with an electrostatic epoxy coating Termination Types 0.5 in - 1NPT conduit 0.75 in - 1NPT conduit 1 ft cable PG 1,5 conduit 0 mm conduit -pin micro-style connector -pin mini-style connector 5-pin mini-style connector 9-pin mini-style connector 6 ft cable Manifold mounting Housing Type HDLS Plug-in, HDLS Non-Plug-in Sealing IP65/66/67; NEMA 1,,, X, 6, 6P, 1, 1 Operating Temperature -1 C to 11 C [10 F to 50 F]; optional: -0 C to 11 C [-0 F to 50 F] Agency Approvals and UL, CE, CSA, CCC Standards UNSPSC Code 0119 UNSPSC Commodity 0119 Switches and controls and relays Sealed Industrial Honeywell Sensing and Control

4 MICRO SWITCH HDLS Series MICRO SWITCH HDLS SERIES OPERATING HEADS SIDE ROTARY: Available levers provide greater versatility. Heads may be positioned with shaft on any side. All are momentary action except maintained head (LSN Series). LSA - Standard: 6 minimum overtravel, 15 maximum pretravel, 5 (single pole) and 7 (double pole) maximum differential travel. Operating temperature range from -1 C to 11 C [10 F to 50 F].* LSR - Low operating torque: 6 minimum overtravel, 15 maximum pretravel, 0.19 Nm [1.7 in lb] maximum operating torque. Operating temperature range from -1 C to 11 C [50 F to 50 F].* LSN - Maintained contact: Maintained on counterclockwise rotation and reset on clockwise rotation, and vice versa. Operating temperature range from -1 C to 11 C [0 F to 50 F]. LSP - Low differential: 68 minimum overtravel, 7 maximum pretravel, (single pole) and (double pole) maximum differential travel. Operating temperature range from -1 C to 11 C [10 F to 50 F].* LSH - Low torque, low differential travel: 68 minimum overtravel. Features low operating torque and narrow differential travel. Operating temperature range from -1 C to 11 C [0 F to 50 F].* LSU - Low pretravel: 5 max. pretravel, 7 min. overtravel, and a second step of 18 max. Operating temperature range from -1 C to 11 C [10 F to 50 F].* LSL - Sequence action: 8 minimum overtravel. Delayed action between operation of two poles. Operating temperature range from -1 C to 11 C [10 F to 50 F].* LSM - Center neutral: 5 minimum overtravel. One set of contacts operates on the clockwise rotation, and another set on the counterclockwise rotation. Operating temperature range from -1 C to 11 C [0 F to 50 F].* LST - Momentary action with extra low torque: 1 in oz of operating and full travel torque with momentary action. Operating temperature range from -1 C to 11 C [10 F to 50 F].* LSS - Gravity return: Has no return spring mechanism so weight of the lever must provide the return force. Extremely light operating torque (5 in oz max.) is useful in conveyor applications and can be operated by small or lightweight objects. Operating temperature range from -1 C to 11 C [0 F to 50 F].* TOP ROTARY: Available levers provide greater versatility. Heads may be positioned with shaft on any side. All are momentary action except maintained head. LSB: With 10 minimum overtravel. Various levers that fit side rotary shafts may be used on the top rotary shaft. Switch is ideal when increased overtravel is required. Momentary action. Standard operating temperature range from -1 C to 11 C [0 F to 50 F].* TOP PLUNGERS: Available with,8 mm [0.19 in] minimum overtravel. Top pin plungers are offered in pin plunger, an adjustable plunger, and a roller plunger. Standard temperature range of -1 C to 9 C [10 F to 00 F]. LSC - Top pin plunger: A corrosionresistant steel plunger for in-line actuating motion. Oil-tight seals on plunger and between the operating head and housing keep out coolant, dust, and chips. Momentary action. LSD - Top roller plunger: A corrosionresistant steel roller and plunger that is adjustable to 9 angles to accept cam or slide operation from any of two directions. Boot seal on the plunger. Momentary action LSV - Adjustable top pin plunger: Provides easy application and saves on installation time. The operating points of the switch can be adjusted from 5,8 mm to 59, mm [.085 in to.5 in]. Seals are the same as the pin plunger. Momentary action. *(Fluorocarbon seals are preferred for temperatures above 9 C [00 F]). Honeywell Sensing and Control

5 Heavy Duty Limit Switches MICRO SWITCH HDLS SERIES OPERATING HEADS SIDE PLUNGERS: Available with,8 mm [0.19 in] minimum overtravel. Side plungers are offered in plain plunger, an adjustable plain plunger, a roller plunger, and a maintained plunger. Standard temperature range of -1 C to 9 C [10 F to 00 F]. LSE - Side pin plunger: For actuating motion inline with the plunger travel. Actuating head may be faced in any of four positions, 9 apart. A boot seal on the plunger and a gasket seal between the head and housing keep out coolant, dust, and chips. Momentary action. LSF - Side roller plunger: Fits close quarters under cams and slides. The head may be faced in any of four positions, 9 apart. The roller can be turned vertical or horizontal to the switch. Boot seal on plunger. Momentary action. LSW - Adjustable side pin plunger: Has the same features of the side plain plunger plus the means to adjust the operating points of the switch from 1 mm to 7, mm [1.615 in to in]. Momentary action. LSG - Maintained contact side pin plunger: Offers a maintained contact on actuation of the switch. A reverse motion of the plunger resets the switch. Sealing is the same as other side plunger actuation heads. Operating temperature range is -1 C to 9 C [0 F to 00 F]. WOBBLE LEVER ACTUATING HEADS: Heads come with either a spring wire, Delrin plastic rod, or steel cat whisker. Any movement of the lever (except pull) will actuate the switch. Standard temperature range of -1 C to 9 C [10 F to 00 F]. LSJ1A-7M - Spring wire: 00 Series SST wire may be formed for special applications. LSJ1A-7N - Flexible actuator: Designed with a tin-plated cable. LSK1A-8C - Coil spring: Designed with a 00 Series SST coil spring. LSJ1A-7A - Plastic rod: Recommended where possible scratching or marring by the actuator is to be avoided. LSK1A-8A - Cat whisker: 00 Series SST actuator designed for low operating force applications. *(Fluorocarbon seals are preferred for temperatures above 9 C [00 F]). Honeywell Sensing and Control 5

6 MICRO SWITCH HDLS Series SPECIAL OPTIONS HIGH TEMPERATURE/CHEMICAL RESISTANT SWITCHES Completely fluorocarbon (FC)-sealed switches have a full FC body gasket coving the switch cavity. Rotary types have an extra FC seal on the operating shaft, while plunger versions have FC boot seals. They are for use in applications where the environment includes fire-resistant synthetic fluids. In addition to most all fluids, the FC-sealed switches may be used with such industrial fluids such as Cellulube, Fyrquell, Houghto-Safe, Pydraul, and other special cutting and hydraulic fluids. The additional FC seals also promote longer operating life for rotaryactuated HDLS switches in applications where the temperatures are normally -1 C to 11 C [10 F to 50 F]. If pre-wired with cable, then temperature limits are 105 C [1 F] dry and 60 C [10 F] wet. To order, insert the additional letters Y and C in the appropriate places in the standard catalog listing, as shown below: LSA1A standard, side-rotary plug-in switch LSYAC1A completely FC-sealed version of LSA1A LOW TEMPERATURE SWITCHES All forms of HDLS limit switches are also available in low-temperature construction. Design features include fluorosilicone diaphragm, shaft seals, and external booth seal (where applicable). If pre-wired with a cable, low temperature limits are -10 C [1 F] flex and -0 C [- F] non-flex. To order, insert the additional letters Y and B in the appropriate places in the standard catalog listing, as shown below: LSA1A standard, side-rotary plug-in switch LSYAB1A low-temperature version of LSA1A S For conduit openings other than 1/-NPT and /-NPT, subsitute the following after LS in the catalog listing: LS PG1,5 LS 0 mm LSA1A side rotary with 1/-1 NPT conduit LSA1A side rotary with 0 mm conduit TEMPERATURE LIMITS Standard HDLS Low Temperature HDLS (Fluorosilicone Sealed): Y_B -1 C [10 F] High Temperature HDLS (Fluorocarbon Sealed)*: Y_C Low Limit High Limit Low Limit High Limit Low Limit High Limit -1 C [0 F] 9 C [00 F] 11 C [50 F] -0 C [-F] -9 C [-0 F] 9 C [00 F] 11 C [50 F] -1 C [10 F] -1 C [0 F] LSA - Side Rotary Momentary X X X X X X LSB - Top Rotary X X X X X X LSC - Top Plain Plunger X X X X X X LSD - Top Roller Plunger X X X X X X LSE - Side Plain Plunger X X X X X X LSF - Side Roller Plunger X X X X X X LSG - Side Plunger, Maintained X X X X X X LSH - Side Rotary, Low PT, Low Torque X X X X X X LSJ - Wobble Stick X X X X X X LSK - Cat Whisker X X X X X X LSL - Side Rotary, Sequence X X X X X X LSM - Side Rotary, Center Neutral X X X X X X LSN - Side Rotary, Maintained X X X X X X LSP - Side Rotary, Low Pretravel X X X X X X LSR - Side Rotary, Low Torque X X X X X X LSV - Top Adjustable Plunger X X X X X X LSW - Side Adjustable Plunger X X X X X X * For HDLS application wherein the upper temperature limit is normally above 9 C [00 F], much longer switch life can be obtained by using completely fluorocarbon-sealed switches rather than standard HDLS. 11 C [50 F] 6 Honeywell Sensing and Control

7 Heavy Duty Limit Switches FACTORY SEALED PRE-WIRED LIMIT SWITCHES Features Pre-wired with 6 ft STOOW-A cable or other, 5, or 9-pin connectors (other lengths available Wire entry area completely factory sealed (Cable version) NEMA 1, 6, 6P, 1; IP67 (Connector version) NEMA 1, 6, 6P, 1, 1; IP67 How to order: To order factory sealed switches, add the modification codes shown below to the standard HDLS listings: Circuitry Cable 1/ in connector SPDT C A (-pin mini-style) B (5-pin mini-style) DD (-pin micro-style) DPDT M R (9-pin mini-style) Examples: LSA1AC = LSA1A with 6 feet of 5-conductor STOW-A cable LSJBM-7N = LSJB-7N with 6 feet of 9-conductor STOOW-A cable LSA1AB = LSA1A with a 5-pin mini-style connector LSA1ADD = LSA1A with a -pin micro-style connector WIRING DIAGRAMS Connectors = Numbers (mini-style) Cables = Colors SINGLE POLE CABLE OR MINI STYLE CONNECTOR WHITE RED 1 5 GREEN BLACK ORANGE RED DOUBLE POLE CABLE OR MINI STYLE CONNECTOR GREEN ORANGE BLACK YELLOW BROWN BLUE WHITE PINK NOTE: Connector versions available with 1/ in conduit only. SWITCH WIRE S FOR CONNECTOR/CABLE Single-Pole Circuitry 5 1 = Ground Double-Pole Circuitry = Ground Honeywell Sensing and Control 7

8 MICRO SWITCH HDLS Series ASSEMBLY MODIFICATIONS Momentary action rotary switches can be furnished in other than the normal assembled conditions. To specify modifications, add the numbers shown below to the catalog listings. Modification number suffixes are: 1 Clockwise actuation only Counterclockwise actuation only Shaft to right of switch front Shaft to left of switch front 5 Shaft to back of switch 7 Indicator light wired to NC circuit For example, Catalog listing LSA1A is an LSA1A switch adjusted for counterclockwise actuation only. The operating shaft is to the right side of the switch when viewing it from the front (label side). No lever. Catalog listing LSA8A7 is an LSA8A switch with the 0 volt indicator light wired to the NC circuit. No lever. PLUNGER ASSEMBLY MODIFICATIONS Add the following modification numbers to the catalog listing in the plunger switch: Side plunger to right of switch front Side plunger to left of switch front 5 Side plunger to back of switch 6 Roller on top plungers perpendicular to mounting surface 7 Light on indicator versions wired to NC circu it 8 Roller on side plungers in vertical position For example, Catalog listing LSF1A is an LSF1A switch with the side roller plunger to the right side. MICRO SWITCH HDLS SERIES ELECTRICAL RATINGS ac Volts; Pilot Duty: AC15, A600/B600 Electrical Rating A* AC15, A600 B AC15, B600 Circuitry Vac Amps at 0.5 Power Factor Make SPDT DPDT Amps at 0.5 Power Factor Break D D Gravity return (Model LSS..) and extra-low torque (Model LST..) MICRO SWITCH HDLS SERIES ELECTRICAL RATINGS dc Volts; Pilot Duty: DC1, R00 Electrical Rating A, B* SPDT DPDT Circuitry Vdc Make & Break Amps Inductive Make & Break Amps Resistive * For switches with an indicator light, use only at voltage stated for indicator light. MICRO SWITCH HDLS limit switches are capable of the following low voltage dc loads Circuitry Vdc Amps Inductive Amps Resistive SPDT DPDT PLUG-IN VS. NON-PLUG-IN MODELS Honeywell HDLS limit switches are offered in two styles: nonplug-in design and plug-in design. With plug-in construction, the wiring and conduit connection is made to the base receptacle. This feature reduces downtime as the plug-in unit can be removed and replaced without disconnecting the wiring or conduit connections to the switch. 8 Honeywell Sensing and Control

9 MICRO SWITCH HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS Description 15 Standard (LSA) Standard Heavy Duty Limit Switches Low Differential (LSP) Low pretravel & low differential travel Side Rotary 5 Pretravel (LSU) Low pretravel SPDT DPDT SPDT DPDT SPDT DPDT 1NO/1NC 1 NO/NC NO/1NC 6 NO/NC NO/1NC 5 NO/NC Circuitry Contacts Body Style Conduit (NPT) SPDT DPDT 1 1 Momentary SPDT Double Break Contact closed Contact open o Pretravel 15 max. 15 max. 9 max. 9 max. 5 max. 5 max. Different. travel 5 max. 7 max. max. max. max. max. Overtravel 6 min. 6 min. 66 min. 66 min. 7 min. 7 min. Oper. torque 0,5 Nm [ in-lb] max. 0,5 Nm [ in-lb] max. 0,5 Nm [ in-lb] max. Action CW & CCW (Spring return) Op. temp range -1 C to 11 C [10 F to 50 F] (for low temp, high temp, or preleaded versions, see page 6) Options Silver Plug-in 0.5 in LSA1A LSP1A LSU1A Gold Plug-in 0.5 in LSA1E LSP1E LSU1E Silver Plug-in 0.5 in 10 V Ind. lite* LSA5A LSP5A LSU5A Silver Plug-in 0.5 in 0 V Ind. lite* LSA8A LSP8A LSU8A V LED lit 1.5 ma Silver Plug-in 0.5 in max. auto polarity LSA9A LSP9A LSU9A Silver Non-plug-in 0.5 in LSAK LSPK LSUK Silver Plug-in 0.75 in LSAB LSPB LSUB Gold Plug-in 0.75 in LSAS Silver Plug-in 0.5 in LSA6B LSP6B LSU6B Gold Plug-in 0.5 in LSA6S Silver Plug-in 0.75 in 10 V Ind. lite* LSAR LSPR LSUR Silver Non-plug-in 0.75 in LSAL LSPL LSUL Silver Non-plug-in 0.5 in LSA7L LSP7L LSU7L * Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 9 C [00 F] Plug-in listings include base receptacle Completely fluorocarbon sealed switches are preferred for use in temperatures above 9 C [00 F] Gold-plated contacts To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. Honeywell Sensing and Control 9

10 MICRO SWITCH HDLS Series Side Rotary MICRO SWITCH HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS Description 15 Low Torque (LSR) Low operating torque Low Diff., Low Torque (LSH) Momentary, low pretravel and low torque SPDT DPDT SPDT DPDT 1NO/1NC 1 15 NO/NC NO/1NC 6 NO/NC Contact closed Contact open o Pretravel 15 max. 15 max. 9 max. 9 max. Different. travel 5 max. 7 max. max. max. Overtravel 6 min. 6 min. 66 min. 66 min. Oper. torque 0,19 Nm [1.7 in-lb] max. 0,19 Nm [1.7 in-lb] max. Action CW & CCW (Spring return) Op. temp range -1 C to 11 C [0 F to 5F] (for low temp, high temp, or preleaded versions, see page 6) Circuitry Contacts Body Style Conduit (NPT) Options Silver Plug-in 0.5 in LSR1A LSH1A Momentary Gold Plug-in 0.5 in LSR1E LSH1E Silver Plug-in 0.5 in 10 V Ind. lite* LSR5A LSH5A Silver Plug-in 0.5 in 0 V Ind. lite* LSR8A LSH8A SPDT DPDT 1 SPDT Double Break Silver Plug-in 0.5 in V LED lit 1.5 ma LSR9A LSH9S max. auto polarity Silver Non-plug-in 0.5 in LSRK LSHK Silver Plug-in 0.75 in LSRB LSHB Silver Plug-in 0.5 in LSR6B LSH6B Silver Plug-in 0.75 in 10 V Ind. lite* LSRR LSHR Silver Non-plug-in 0.75 in LSRL LSHL Silver Non-plug-in 0.5 in LSR7L LSHJ7L * Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 9 C [00 F] Plug-in listings include base receptacle Completely fluorocarbon sealed switches are preferred for use in temperatures above 9 C [00 F] Gold-plated contacts To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. 10 Honeywell Sensing and Control

11 MICRO SWITCH HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS Description Maint. Contact (LSQ) Maint. 6 Alt. Action Maint. Contact (LSN) Maintained, -pos 1,. Std. Heavy Duty Limit Switches Center Neutral (LSM) Center Neutral (Pole 1 operates CCW; Pole operates CW) Side Rotary Sequence Action (LSL) Sequential (Pole 1 operates before Pole, either CW, CCW, or both) SPDT SPDT DPDT DPDT DPDT Maintained Contact 9 Maintained Contact Maintaine Contact CW Contact closed 5 85 Contact open o Pretravel 65 max. 65 max. 18 max. 1 st : 15 nd : add l 1 Different. travel max. max. 1 max. each pole: 5 Overtravel min. min. 57 min. 8 min. Oper. torque 0,5 Nm [ in-lb] 0,5 Nm [ in-lb] 0,5 Nm [ in-lb] Action Maintained CW & CCW (Spring return) Op. temp range Circuitry Contacts Body Style Conduit (NPT) Options Silver Plug-in 0.5 in LSQ00 LSN1A Momentary Gold Plug-in 0.5 in LSN1E Silver Plug-in 0.5 in 10 V Ind. lite* LSN5A Silver Plug-in 0.5 in 0 V Ind. lite* LSN8A SPDT 1 SPDT Double Break Silver 0.5 in LSNK -1 C to 11 C [0 F to 5F] (for low temp, high temp, or preleaded versions, see page 6) 75-1 C to 11 C [10 F to 5F] DPDT Non-plugin Silver Plug-in 0.75 in LSNB LSMD LSLC Silver Plug-in 0.5 in LSN6B LSM6D LSL6C Gold Plug-in 0.5 in LSM6U Silver Non-plugin 0.75 in LSNL LSMN LSLM Silver Non-plugin 0.5 in LSN7L LSM7N LSL7M * Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 9 C [00 F]. ** Plug-in listings include base receptacle *** Completely fluorocarbon-sealed switches are preferred for temperatures above 9 C [00 F]. 1 Mechanical trip before electrical trip. Total travel is approximately 8 max. Maintained contact switch normally used with LSZ5 yoke actuator. Gold-plated contacts To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch. Honeywell Sensing and Control 11

12 MICRO SWITCH HDLS Series Side Rotary Figure. MICRO SWITCH HDLS side rotary (single pole) dimensions Figure. MICRO SWITCH HDLS side rotary (double pole) dimensions SPDT Plug-in DPDT Plug-in 6,0 [.] 6,0 [.] 106,7 [.0] 7,9 [.95] 7, [.9] 70, 119 [.69] 89,5 7, [.9] 16,5 [.65],5 18,8 [.7] 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH SPDT Non-plug-in DPDT Non-plug-in 5 [0.58] 6,0 [.] 7, [.9] 75,9 [.97] 70, 119 [.69] [0.8] 6,6 [1.],5 1, [.8] 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH LSA DPDT NON PLUG-IN PRODUCT DIMENSIONS 1 Honeywell Sensing and Control

13 MICRO SWITCH HDLS SERIES OPERATING CHARACTERISTICS BY OPERATING HEAD/MODEL Description Heavy Duty Limit Switches Top Rotary (LSB) Top Rotary High overtravel often ideal when increased overtravel is required (10 min.). Uses same levers as side rotary SPDT DPDT 5 1NO/1NC 15 5 NO/NC Contact closed Contact open o Pretravel 5 max. 5 max. Different. travel 1 max. 1 max. Overtravel 11 min. 11 min. Oper. torque 0,8 Nm [.5 in lb] max. Op. temp range -1 C to 11 C [10 F to 50 F] (for low temp, high temp, or preleaded versions, see page 6) Circuitry Contacts Body Style Conduit (NPT) Options Silver Plug-in 0.5 in LSB1A Momentary Gold Plug-in 0.5 in LSB1E Silver Plug-in 0.5 in 10 V Ind. lite* LSB5A Silver Plug-in 0.5 in 0 V Ind. lite* LSB8A SPDT DPDT 1 1 SPDT Double Break Silver Plug-in 0.5 in V LED lit 1.5 ma LSB9A max. auto polarity Silver Non-plug-in 0.5 in LSBK Silver Plug-in 0.75 in LSBB Silver Plug-in 0.5 in LSB6B Silver Plug-in 0.75 in 10 V Ind. lite* LSBR Silver Non-plug-in 0.75 in LSBL Silver Non-plug-in 0.5 in LSB7L * Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 9 C [00 F] Plug-in listings include base receptacle Completely fluorocarbon sealed switches are preferred for use in temperatures above 9 C [00 F] Gold-plated contacts Honeywell Sensing and Control 1

14 MICRO SWITCH HDLS Series Top Rotary Figure. MICRO SWITCH HDLS top rotary (single pole) dimensions Figure 5. MICRO SWITCH HDLS top rotary (double pole) dimensions SPDT Plug-in DPDT Plug-in Ø 7, DIA. [Ø 0.9] DIA. 7, DIA [.9] 9, [5.0] 57, [.5] 6, [1.], [1.67] 57, [.5] 6, [1.], [1.67] 7,9 [.95] 70, 19,8 [5.5] ,5 [.65] 9,1, 18,8 [.7] 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH SPDT Non-plug-in 7, DIA [.9] LSB DPDT PLUG-IN PRODUCT DIMENSIONS DPDT Non-plug-in 1.6 7, DIA [.9] , [.5] 6, [1.], [1.67] 6, [1.], [1.67] 6, [1.] 17,6 [5.0] 75,8 [.98] 70, 19.8 [5.5] ,0 6,6 [1.], 1, [.8] 7.8 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH LSB DPDT NON PLUG-IN PRODUCT DIMENSIONS 1 Honeywell Sensing and Control

15 Heavy Duty Limit Switches Levers Table. Common levers for use with MICRO SWITCH HDLS Rotary Switches Levers for use with side or top rotary actuated switches are available in a wide choice of sizes and materials. The most common listings are shown below. Rollers may be on either side of the lever to best match the external acutating mechanism. LSZ51A&C fixed rotary lever, nylon roller, front/ backl LSZ51B&D fixed rotary lever, steel roller, front/ back LSZ59A,LSZ59B, LSZ59C,LSZ59D short fixed lever, front/back LSZ69CA spoke lever - 6 inches LSZ55A,LSZ55B, LSZ55C,LSZ55D offset lever, front/back LSZ60 one-way roller lever LSZ5A, LSZ5B, LSZ5C, LSZ5D yoke lever, nylon and steel rollers, front/back placement LSZ5R spring wire 0,8 mm [1 in] LSZ5A, LSZ5B, LSZ5C, LSZ5D adj. lever, nylon/ steel, front/back LSZ5J adjustable lever, nylon roller mm [1 in] LSZ5K adjustable lever, nylon roller [1.5 in] LSZ5M aluminum rod 19,7 mm [5.5 in] LSZ61 loop 15, mm [6 in] LSZ67CA Plastic conveyor roller LSZ68 rod w/ spring 0,8 mm [1 in] LSZ5N stainless steel rod 0, mm [1 in] Honeywell Sensing and Control 15

16 MICRO SWITCH HDLS Series Levers Table. HDLS SERIES ACTUATOR CODE TABLE (see previous page) Catalog Listing Material Roller Dia. (in) Roller Width (in) Roller Mounting Fixed 1.5 inch radius Rollerless n/a n/a n/a LSZ51A Nylon Front LSZ51B Steel Front LSZ51C Nylon Back LSZ51D Steel Back LSZ51F Nylon Front LSZ51G Nylon Front LSZ51J Nylon Back LSZ51L Ball bearing Back LSZ51M Nylon Back LSZ51N Steel Front LSZ51P Nylon Front Adjustable 1.5 in to.5 in radius Rollerless n/a n/a n/a LSZ5A Nylon Back LSZ5B Steel Back LSZ5C Nylon Front LSZ5D Steel Front LSZ5E Nylon Front LSZ5J Nylon Front LSZ5K Nylon Front LSZ5L Ball bearing Front LSZ5M Nylon Front LSZ5N Nylon Front Yoke 1.5 in radius LSZ5A Nylon Front/Back LSZ5B Steel Front/Back LSZ5D Steel Front/Front LSZ5E Nylon Back/Front LSZ5M Nylon Back/Front LSZ5P Steel Back/Back LSZ5S Nylon Back/Back Rod Hub only n/a n/a n/a LSZ5M Alum, 5.5 in Ø 0.15 n/a n/a LSZ5N LSZ5R LSZ5V LSZ5P Stainless, 1 in SST spring wire, 1 in Flex cable (tin plated steel),.8 in Plastic rod, 1 in Ø 0.15 n/a n/a Ø n/a n/a Ø 0.19 n/a n/a Ø 0.7 n/a n/a LSZ5W Plastic rod, Ø 0.7 n/a n/a 7. in LSZ59T 1 in stainless Ø 0.19 n/a n/a steel Spoke LSZ69CA Stainless 6.0 n/a n/a Catalog Listing Material Roller Dia. (in) Roller Width (in) Roller Mounting Offset 1.5 in radius Rollerless n/a n/a n/a LSZ55A Nylon Back LSZ55B Steel Back LSZ55C Nylon Front LSZ55D Steel Front LSZ55E Nylon Front LSZ55K Nylon Front Short fixed - 1. in radius LSZ59A Nylon Front LSZ59B Steel Front LSZ59C Nylon Back LSZ59D Steel Back One-way roller lever LSZ60A Nylon Front LSZ60B Steel Front Flexible loop LSZ61 Ø inch flexible loop/cap screw Nylatron LSZ618 Ø 0.19 Nylatron 9.5 inch flexible loop/cap screw LSZ5 Hub only n/a n/a n/a Spring rod LSZ68 LSZ617 LSZ686 Delrin rod, 1 in Delrin rod, 16 in Delrin rod, 6 in Ø 0.5 n/a n/a Ø 0.5 n/a n/a Ø 0.5 n/a n/a Rubber roller levers LSZ51Y Rubber front (standard) LSZ55Y Rubber front (offset) LSZ5Y (adjustable) Rubber front Plastic roller levers LSZ67AA (conveyor) Plastic n/a 16 Honeywell Sensing and Control

17 Heavy Duty Limit Switches Side Rotary MICRO SWITCH HDLS side rotary levers cam tracking Levers for side and top rotary switches are normally ordered as separate catalog listings. They also may be ordered by including a suffix to the switch catalog listing (see nomenclature tree in this document) and adding the lever price. Figure 6. LSZ51 type levers cam tracking Figure 7. LSZ5 type levers cam tracking 11,0 [.] 57, - 6,8 [ ] ADJUSTMENT LEVER INVERTED 51,0-57, [ ] ADJUSTMENT 6,5 X DIA [.5 X.75 DIA] 1, [1.5] 6,5 [.5] ADJUSTMENT LEVER INVERTED 11,0 [.] 58,9-65, [. -.57] ADJUSTMENT,9-9. [ ] ADJUSTMENT 1, 6,5 X DIA [.5 X.75 DIA] 5 6,5 [.5] ADJUSTMENT mm [1.00 in] 1, mm [0.85 in] 56, mm to 6,7 mm [. in to.7 in] adjustment 6,5 mm x mm dia [0.5 in x 0.75 in dia] OR 6,5 mm x mm dia [0.5 in x 1.5 in dia] OR 1,7 mm x mm dia [0.50 in x 1.0 in dia] mm to 91,1 mm [1.5 in to.6 in] adjustment mm [0.75 in] 11,0 mm [0. in] 6,5 mm [0.5 in] adjustment Figure 8. LSZ5 type levers cam tracking 58,7 mm to 65,0 mm [.1 in to.56 in] adjustment Figure 9. LSZ55 type levers cam tracking 78, mm to 8,6 mm [.08 in to. in] adjustment 70,9 mm to 77, mm [.79 in to.0 in] adjustment 6,5 mm x mm dia [0.5 in x 0.75 in dia.] 1, mm [0.85 in] 17,0 mm [5.0 in] max. aluminum rod 0, mm [1.0 in] max. stainless steel rod 1, mm [0.85 in] mm [1.50 in] mm [1.0 in] mm [1.00 in] 9,05 mm [0.75 in] 5 mm [0.75 in] 11,0 mm [0. in] 5, mm [0.1 in] adjustment 11,0 mm [0. in] 6,5 mm [0.5 in] adjustment Honeywell Sensing and Control 17

18 MICRO SWITCH HDLS Series Plungers MICRO SWITCH HDLS SERIES ORDER GUIDE/RECOMMENDED LISTINGS All top plungers are momentary action. Plain (LSC) Roller (LSD) Adjustable (LSV) Description Top plain plunger for inline operating motion Roller plunger can be set at 9 increments to accept cam or slide actuation Adjustable top plain plunger simplifies installation since operating point can be adjusted from.085 in to.5 in SPDT DPDT SPDT DPDT SPDT DPDT 0 in 0.07 in 1NO/1NC 0 in in 0.07 in NO/NC in 0.07 in in 1NO/1NC 0 in in 0.07 in NO/NC in 0 in 0.07 in 1NO/1NC in 0 in 0.07 in NO/NC in Contact closed Contact open o Pretravel Different. travel 0.6 in 0,8 mm [0.015 in] 0.6 in 0,51 mm [0.0 in] 0.6 in 0.6 in 1,78 mm [0.07 in] 0,8 mm [0.015 in] 0,51 mm [0.0 in] 0.6 in 0,8 mm [0.015 in] 0.6 in 0,51 mm [0.0 in] Overtravel,8 mm [0.19 in] Operating force 17,8 N [ lb] max. Op. temp range -1 C to 9 C [10 F to 00 F] (for low temp, high temp, or preleaded versions, see page 6) Circuitry Contacts Body Style Conduit (NPT) Options Momentary Silver Plug-in 0.5 in LSC1A LSD1A LSV1A Gold Plug-in 0.5 in LSC1E LSD1E LSV1E Silver Plug-in 0.5 in 10 V Ind. lite* LSC5A LSD5A LSV5A SPDT DPDT 1 SPDT Double Break Silver Plug-in 0.5 in 0 V Ind. lite* LSC8A LSD8A LSV8A Silver Non-plug-in 0.5 in LSCK LSDK LSVK 8 Silver Plug-in 0.75 in LSCB LSDB LSVB 7 Silver Plug-in 0.5 in LSCR LSDR LSVR Silver Plug-in 0.75 in 10 V Ind. lite* LSC6B LSD6B LSV6B 6 Silver Non-plug-in 0.75 in LSCL LSDL LSVL 5 Silver Non-plug-in 0.5 in LSC7L LSD7L LSV7L * Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 9 C [00 F] Plug-in listings include base receptacle Completely fluorocarbon sealed switches are preferred for use in temperatures above 9 C [00 F] Gold-plated contacts 18 Honeywell Sensing and Control

19 Heavy Duty Limit Switches Figure 10. MICRO SWITCH HDLS LSC Series (single pole plunger dimensions Plungers Figure 11. MICRO SWITCH HDLS LSC Series (double pole plunger dimensions SPDT Plug-in DPDT Plug-in 9, [.7] Ø [1.0] 9, [.7] Ø [1.0] 6,0 [1.81] OPERATING 8,7 [1.1] 6,0 [1.81] OPERATING 8,7 [1.1] 7,9 [.95] 70, 16,5 [.65] 9,1,5 18,8 [.7] 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH SPDT Non-plug-in 9, [.7] DPDT Non-plug-in LSC DPDT PLUG-IN PRODUCT DIMENSIONS 9, [.7] Ø [1,0] Ø 6,0 [1.81] OPERATING 8,7 [1.1] 6,0 [1.8] OPERATING 8,7 [1.1] 75,8 [.98] 70, 6,6 [1.] 9,0, 1, [0.8] 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH LSC DPDT NON PLUG-IN PRODUCT DIMENSIONS Honeywell Sensing and Control 19

20 MICRO SWITCH HDLS Series Plungers Figure 1. MICRO SWITCH HDLS LSD Series (single pole) top roller plunger dimensions Figure 1. MICRO SWITCH HDLS LSD Series (double pole) top roller plunger dimensions SPDT Plug-in DPDT Plug-in,8 [.19] Ø1,7 [.50] [1.19] Ø1.7 [.50] 8,7 [1.1] 55,9 [.0] OPERATING 8,7 [1.1] 55,9 [,0] OPERATING 7,9 [.95] 70, 16,5 [.65] 9,1 SPDT Non-plug-in, 1, [.8] DPDT Non-plug-in 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH,8 [1.19] Ø1,7 [.50],8 [0.19] Ø1,7 [.50] 8,7 [1.1] 55,9 [.0] OPERATING 8,7 [1.1] 55,9 [.0] OPERATING 75,8 [.98] 70, 6,6 [1.] 9,0, 1, [.8] 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH LSD DPDT NON PLUG-IN PRODUCT DIMENSIONS 0 Honeywell Sensing and Control

21 Heavy Duty Limit Switches Figure 1. MICRO SWITCH HDLS LSV Series top adjustable plunger (single pole) dimensions Plungers Figure 15. MICRO SWITCH HDLS LSV Series top adjustable plunger (double pole) dimensions SPDT Plug-in DPDT Plug-in 17,5 [.69] Ø 8,7 5,1 [1.1] [.09] MIN OPERATING 7,9 [.1] MAX OPERATING 17,5 [.69] Ø [Ø1.00] 5,1 [.09] MIN OPERATING 8,7 [1.1] 7,9 [.1] MAX OPERATING 7,9 [.95] 70, 16,5 [.65] 9,0 SPDT Non-plug-in, [.7] DPDT LSV DPDT Non-plug-in PLUG-IN PRODUCT DIMENSIONS 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH 17,5 [.69] 6,6 7,9 [.1] 8,7 [1.1] 5,1 [.09] MIN OPERATING MAX OPERATING 17,5 [.69] Ø [Ø1.00] 8,7 [1.1] 5,1 [.09] MIN OPERATING 7,9 [.1] MAX OPERATING 75,8 [.98] 70, ,6 [1.] 9,0, 1, [.8] LSV DPDT NON PLUG-IN PRODUCT DIMENSIONS 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH LSV SPDT NON PLUG-IN PRODUCT DIMENSIONS Honeywell Sensing and Control 1

22 MICRO SWITCH HDLS Series Plungers MICRO SWITCH HDLS SERIES OPERATING CHARACTERISTICS BY OPERATING HEAD/MODEL Heads may be positioned to accept actuation from any of four directions, 9 apart. Plain (LSE) Roller (LSF) Adjustable (LSW) Maintained (LSG) Description Side plain plunger for in-line actuating (momentary) Side roller plunger (momentary) Adjustable side plain plunger (momentary) Side plain plunger with maintained contact 0 in 1NO/1NC 0 in NO/NC in 0.08 in reset 0.10 in in 0.10 in in 0.17 in trip Contact closed Contact open o 0.9 in 0.9 in 0.5 in Pretravel,5 mm [0.10 in], mm [0.17 in] Different. travel Single pole: 0,6 mm [0.05 in] Double pole: 0,89 mm [0.05 in],9 mm [0.09 in] Overtravel,8 mm [0.19 in],0 mm [0.08 in] Operating force 6,7 N [6 lb] max.,5 N [10 lb] max. Op. temp range -1 C to 9 C [10 F to 0F] (for low temp, high temp, or preleaded versions, see page 6) -1 C to 9 C [0 F to 0F] Circuitry Contacts Body Style Conduit (NPT) Options Momentary Silver Plug-in 0.5 in LSE1A LSF1A LSW1A LSG1A Gold Plug-in 0.5 in LSE1E LSF1E LSW1E LSG1E Silver Plug-in 0.5 in 10 V Ind. lite* LSE5A LSF5A LSW5A LSG5A SPDT DPDT 1 SPDT Double Break Silver Plug-in 0.5 in 0 V Ind. lite* LSE8A LSF8A LSW8A LSG8A Silver Non-plug-in 0.5 in LSEK LSFK LSWK LSGK 8 Silver Plug-in 0.75 in LSEB LSFB LSWB LSGB 7 Silver Plug-in 0.5 in LSER LSFR LSWR LSGR Silver Plug-in 0.75 in 10 V Ind. lite* LSE6B LSF6B LSW6B LSG6B 6 Gold Plug-in 0.5 ub LSE6S 5 Silver Non-plug-in 0.75 in LSEL LSFL LSWL LSGL Silver Non-plug-in 0.5 in LSE7L LSF7L LSW7L LSG7L * Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 9 C [00 F] Plug-in listings include base receptacle Completely fluorocarbon sealed switches are preferred for use in temperatures above 9 C [00 F] Gold-plated contacts Honeywell Sensing and Control

23 Heavy Duty Limit Switches Figure 16. MICRO SWITCH HDLS LSE Series side plain plunger (single pole) dimensions Plungers Figure 17. MICRO SWITCH HDLS LSE Series side plain plunger (double pole) dimensions SPDT Plug-in 7,9 [.95],0 [1.0] OPERATING Ø Ø9, [.7] 1,5 [1.] 70, DPDT Plug-in [,5],0 [1.0] OPERATING Ø Ø 9, [.7] 1,5 [1.] 70, 16,5 [.65] 9,1,5 18,8 [.7] 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH SPDT Non-plug-in DPDT Non-plug-in,0 [1.0] OPERATING,0 [1.0] OPERATING Ø9, [.7] Ø 1,5 [1.] Ø Ø 9, [.7] 1,5 [1.] 75,8 [.98] 70, 6,6 [1.] 9,0, 1, [.8] 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH LSE SPDT NON PLUG-IN PRODUCT DIMENSIONS Honeywell Sensing and Control

24 MICRO SWITCH HDLS Series Plungers Figure 18. MICRO SWITCH HDLS LSF Series side roller plunger (single pole) dimensions Figure 19. MICRO SWITCH HDLS LSF Series side roller plunger (double pole) dimensions SPDT Plug-in DPDT Plug-in, [1.7] OPERATING 1,7 [.50] ROLLER DIAMETER,8 [.19] 1,5 [1.] 0., [1.7] OPERATING 1.7 [.50] ROLLER DIAMETER,8 [.19] 1,5 [1.] 7,9 [.95] 70, [,5] 16,5 [.65] 9,1 SPDT Non-plug-in, [1,6] 18,8 [.7] DPDT Non-plug-in 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH, [1.7] OPERATING 1,7 [.50] ROLLER DIAMETER,8 [.19] 1,5 [1.], [1.7] OPERATING 1,7 [.50] ROLLER DIAMETER,8 [.19] n 1,5 [1.] 75,8 [.98] 70, 6,6 [1.] 9,0, [1,6] 1, [.8] 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH LSF DPDT NON PLUG-IN PRODUCT DIMENSIONS Honeywell Sensing and Control

25 Heavy Duty Limit Switches Figure 0. MICRO SWITCH HDLS LSW Series side adjustable plunger (single pole) dimensions Figure 1. MICRO SWITCH HDLS LSW Series side adjustable plunger (double pole) dimensions Plungers SPDT Plug-in DPDT Plug-in MIN OPERATING 7,5 [1.87] MAX OPERATING 1, [1.] MIN OPERATING 7,5 [1.87] MAX OPERATING 1, [1.] 7,9 [.95] Ø 7,9 [.1] ACROSS FLATS 70, Ø 7,9 [.1] ACROSS FLATS 9,0 16,5 [.65],5 18,8 [.7] 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH SPDT Non-plug-in 75,8 [.98] MIN OPERATING Ø 7,5 [1.87] MAX OPERATING 7,9 [.1] ACROSS FLATS 1, [1.] 70, DPDT Non-plug-in LSW DPDT PLUG-IN PRODUCT DIMENSIONS MIN OPERATING Ø 7,9 [.1] ACROSS FLATS 7,5 [1.87] MAX OPERATING 1, [1.] 6,6 [1.] 9,0, 1, [.8] 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH LSW DPDT NON PLUG-IN PRODUCT DIMENSIONS Honeywell Sensing and Control 5

26 MICRO SWITCH HDLS Series Plungers Figure. MICRO SWITCH HDLS LSG Series maintained contact side plunger (single pole) dimensions Figure. MICRO SWITCH HDLS LSG Series maintained contact side plunger (double pole) dimensions SPDT Plug-in DPDT Plug-in [0.85] 7,5 [1.8] OPERATING 76, [.00] Ø 9,7 [.8] 7,5 [1.8] OPERATING 76, [.00] X Ø 9,7 [.8] 7,9 [.95] 70, X Ø 119,1 [.69] X n 16,5 [.65] 9,1,5 18,8 [.7] 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH LSG SPDT PLUG-IN PRODUCT DIMENSIONS SPDT Non-plug-in DPDT Non-plug-in [0.85] 7,5 [1.8] OPERATING 76, [.00] Ø 9,7 [.8] 7,5 [1.8] OPERATING 76, [.00] X Ø 9,7 [.8] 101,7 [.0] 75,8 [.98] 70, 119,1 [.69] X Ø 6,6 [1.] 9,0, 1, [.8] 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH LSG DPDT NON PLUG-IN PRODUCT DIMENSIONS 6 Honeywell Sensing and Control

27 Heavy Duty Limit Switches Wobbles LSJ Series 7A Actuator LSJ Series 7N Actuator LSJ Series 7M Actuator LSK Series 8A-8C Actuator Description Delrin plastic rod lever (wobble stick) Flexible cable lever Spring wire lever - may be formed for special needs Cat whisker actuator for low operating force applications 1 NO/NC NO/NC NO/NC A** NO/NC C NO/NC Contact closed Contact open o LSJ1A-7M - Spring wire Circuitry Contacts Body Style Conduit (NPT) SPDT DPDT 1 1 LSJ1A-7N - Flexible actuator Momentary SPDT Double Break LSK1A- 8C - Coil spring LSJ1A-7A - Plastic rod LSK1A- 8A - Cat whisker Length Actuator: 5.5 in Actuator: 5.5 in Actuator: 1 in 8A act.: 5.5 in SST 8C act.: 5.5 in steel plated Pretravel mm [1.0 in] 8,0 mm [1.5 in] 10 mm [.0 in] 51,0 mm [.0 in] Oper. force,78 Nm [10 oz] 1,95 Nm [7 oz] 1,9 Nm [5 oz] 8A: 1,9 Nm [5 oz]; 8C 1,95 Nm [7 oz] Op. temp range -1 C to 9 C [1F to 00 F] (for low temp, high temp, or preleaded versions, see page 6) Options Silver Plug-in 0.5 in LSJ1A-7A LSJ1A-7N LSJ1A-7M LSK1A-8A LSK1A-8C Gold Plug-in 0.5 in LSJ1E-7M Silver Plug-in 0.5 in 10 V Ind. lite* LSJ5A-7A LSJ5A-7N LSJ5A-7M LSK5A-8A LSK5A-8C Silver Plug-in 0.5 in 0 V Ind. lite* LSJ8A-7A LSJ8A-7N LSJ8A-7M LSK8A-8A LSK8A-8C Silver Non-plug-in 0.5 in LSJK-7A LSJK-7N LSJK-7M LSKK-8A LSKK-8C Silver Plug-in 0.75 in LSJB-7A LSJB-7N LSJB-7M LSKB-8A LSKB-8C Silver Plug-in 0.5 in LSJ6B-7A LSJ6B-7N LSJ6B-7M LSK6B-8A LSK6B-8C Silver Plug-in 0.75 in 10 V Ind. lite* LSJR-7A LSJR-7N LSJR-7M LSKR-8A LSKR-8C Silver Non-plug-in 0.75 in LSJL-7A LSJL-7N LSJL-7M LSKL-8A LSKL-8C Silver Non-plug-in 0.5 in LSJ7L-7A LSJ7L-7N LSJ7L-7M LSK7L-8A LSK7L-8C * Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 9 C [00 F] Plug-in listings include base receptacle Completely fluorocarbon sealed switches are preferred for use in temperatures above 9 C [00 F] Gold-plated contacts ** These cat whiskers have a 5.5 inch long actuator. To specify a 7.5 inch length actuator, substitute -8B for -8A. Honeywell Sensing and Control 7

28 MICRO SWITCH HDLS Series Wobbles Figure. MICRO SWITCH HDLS LSJ -7A Series wobble (single pole) dimensions SPDT Plug-in Ø6, [.5],6 Figure 5. MICRO SWITCH HDLS LSJ -7A Series wobble (double pole) dimensions DPDT Plug-in Ø6, [.5] 19,7 [5.50] 19,7 [5.50] 15, [.60] 6,5 [.50] 15, [.60] 6,5 [.50] 7,9 [.95] 70, 16,5 [.65] 9,0 SPDT Non-plug-in,5 Ø6, [.5] 18,8 [.7] DPDT Non-plug-in LSJ PLASTIC ROD DPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY) Ø 6, [.5] 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH 19,7 [5.50] 19,7 [5.50] 15, [.60] 6,5 [.50] 15, [.60] 6,5 [.50] 75,8 [.98] 70, 6,6 [1.] 9,0, 8 Honeywell Sensing and Control 1, [.8] 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH LSJ PLASTIC ROD DPDT NON PLUG-IN PRODUCT DIMENSIONS

29 Heavy Duty Limit Switches Wobbles Figure 6. MICRO SWITCH HDLS LSJ -7N Series wobble (single pole) dimensions SPDT Plug-in [.850] Ø,75 [.187] Figure 7. MICRO SWITCH HDLS LSJ -7N Series wobble (double pole) dimensions DPDT Plug-in 6, [.5] [5.50] 19,7 [5.50] 15, [.60] 6,5 [.50] 15, [.60] 6,5 [.50] 7,9 [.95] 70, 16,5 [.65] 9,0 [.850],5 SPDT Non-plug-in LSJ FLEXIBLE CABLE SPDT PLUG-IN PRODUCT DIMENSIONS Ø.75 [1.87] 18,8 [.7] DPDT Non-plug-in LSJ FLEXIBLE CABLE DPDT PLUG-IN PRODUCT DIMENSIONS 6, [.5] 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH 15, [.60] 6,5 [.50] 19,7 [5.50] 6,5 [.50] 19,7 [5.5] 75,8 [.98] 70, ,6 [1.] 9,0, 1, [.8] LSJ FLEXIBLE CABLE DPDT NON PLUG-IN Honeywell PRODUCT DIMENSIONS Sensing and Control 9 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH

30 MICRO SWITCH HDLS Series Wobbles Figure 8. MICRO SWITCH HDLS LSJ -7M Series wobble (single pole) dimensions SPDT Plug-in Ø,0 [.08] Figure 9. MICRO SWITCH HDLS LSJ -7M Series wobble (double pole) dimensions DPDT Plug-in n,0 [.08] 0, [1.00] 0, [1.00] 15, [.60] 66,8 [.6] 15, [.60] 66,8 [.6] 7,9 [.95] 70, 16,5 [.65] 9,0,5 SPDT Non-plug-in LSJ SPRING WIRE SPDT PLUG-IN PRODUCT DIMENSIONS,0 [.08] 18,8 [.7] DPDT Non-plug-in 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH,0 [.08] 15, [.60] 0, [1.00] 66,8 [.6] 15, [.60] 0, [1.00] 66,8 [.6] 75,8 [.98] 70, 6,6 [1.] 9,0, 0 Honeywell Sensing and Control 1, [.8] 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH

31 Heavy Duty Limit Switches Figure 0. MICRO SWITCH HDLS LSK -8A Series wobble (single pole) dimensions Wobbles Figure 1. MICRO SWITCH HDLS LSK -8A Series wobble (double pole) dimensions SPDT Plug-in 1, [.05] DPDT Plug-in Ø1, [.05] 19,7 [5.50] 19,7 [5.50] 15, [.60] 65,0 [.56] 15, [.60] 65,0 [.56] 7,9 [.95] 70, 9,0 Ø1, [.05] 16,5 [.65] SPDT Non-plug-in,5 18,8 [.7] DPDT Non-plug-in LSK CAT WHISKER DPDT PLUG-IN [.05] PRODUCT DIMENSIONS Ø1, 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH 19,7 [5.50] 19,7 [5.50] 15, [.60] 65,0 [.56] 15, [.60] 65,0 [.56] 75,8 [.98] 70, 6,6 [1.] 9,0, CAT WHISKER SPDT NON PLUG-IN PRODUCT DIMENSIONS 1, [.8] Honeywell Sensing and Control 1 LSJ CAT WHISKER DPDT NON PLUG-IN PRODUCT DIMENSIONS 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH

32 MICRO SWITCH HDLS Series Wobbles Figure. MICRO SWITCH HDLS LSK -8C Series wobble (single pole) dimensions SPDT Plug-in [.850] n6,5 [.5] Figure. MICRO SWITCH HDLS LSK -8C Series wobble (double pole) dimensions [.850] DPDT Plug-in Ø6,5 [.5] 10 [5.50] 10 [5.50] 15, [.60] 15, [.60] 7,9 [.95] 70, 16,5 [.65] 9,0,5 SPDT Non-plug-in LSK COIL SPRING SPDT PLUG-IN [.850] PRODUCT DIMENSIONS Ø6,5 [.5] 18,8 [.7] DPDT Non-plug-in LSJ SPRING WIRE DPDT PLUG-IN PRODUCT DIMENSIONS (FOR [.850] REFERENCE ONLY) Ø6.5 [.5] 9,5 [.7] Ø C'BORE X 7,8 [.1] DEPTH 10 [5.50] 10 [5.50] 15, [.60] 15, [.60] 75,8 [.98] 70, 6,6 [1.] 9,0, 1, [.8] 5. 8,0 [.] Ø C'BORE X 7,8 [.1] DEPTH Honeywell Sensing and Control COIL SPRING SPDT NON PLUG-IN PRODUCT DIMENSIONS LSK COIL WIRE DPDT NON PLUG-IN PRODUCT DIMENSIONS

33 Heavy Duty Limit Switches SPECIAL APPLICATIONS HIGH CAPACITY LIMIT SWITCH Features High dc current ratings 0 A rating at 10 Vac (single pole) Plug-in or non-plug in Positive retention lever arm High resistance to seismic shock This series has a wide gap contact block that handles a higher make/break dc load. In addition, a special lever arm has a serrated shaft hole and a cap screw with locking nut for attaching the lever to the rotary shaft. This assures a firm grip on the operting shaft and positive retention of the lever adjustment. The need for precise operation, coupled with severe environmental conditions places rigid demands on any control. Honeywell satisfies these demands with its high capacity HDLS, designed to perform reliably under these conditions. Listings LSQ051 Double pole, non-plug-in, 0.75 in conduit LSQ05 Double pole, plug-in, 0.75 in conduit 17 9 Voltage 1 Momentary SPDT Double Break Single Pole Resistive Load Inductive Load 1 Double Pole Resistive Load Inductive Load 15 Vdc.0 A 1.0 A 1.0 A 0. A 50 Vdc 0.7 A 0. A 0. A 0. A 10 Vac 0 A 0 A 10 A 10 A 0 Vac 15 A 15 A 7.5 A 7.5 A 80 Vac 10 A 10 A 5 A 5 A 600 Vac 5 A 5 A.5 A.5 A Maximum operating rate - 15 operations per minute. LSQ05 LSQ05 Single pole, non-plug-in, 0.5 in conduit Single pole, plug-in, 0.5 in conduit LSZ616 Pretravel Diff. travel Overtravel Oper. torque Action 75 Replacement lever for above listings 17 max. 8 max. 58 min. 0,5 Nm ( in-lb) max. CW and CCW (spring return) Honeywell Sensing and Control

34 MICRO SWITCH HDLS Series SPECIAL APPLICATIONS GRAVITY RETURN SIDE ROTARY SWITCHES (LSS) LSS1H gravity-return, side-rotary switches have no return spring mechanism. The weight of the actuating lever must provide the force to restore it to the free position. The extremely light 5 in-oz. max. operating torque is useful in conveyor applications since it enables operation by small or lightweight objects. Because the head is unsealed, the LSS1H is classified as NEMA 1. However, the switch cavity is sealed to protect the switch contacts. LSS1H Description Gravity-return side rotary Circuitry SPDT, double break Contacts Silver Sealing NEMA 1 Electrical rating (B) NEMA B600 Body style Plug-in Conduit (NPT) 0.5 in Differential travel 1 max. Total travel (no stop)* 6 Operating torque 0,05 Nm [5 in-oz] max. * Switch has approximately 18 dwell of the normally closed and normally open switch contacts. EXTRA LOW TORQUE SIDE ROTARY SWITCHES (LST) LST1H extra-low torque, side-rotary switches have a low force return spring and a maximim operation torque of 1 in-oz. It is rated as NEMA 1 due to an unsealed head. The switch cavity is sealed to protect the switch contacts. LST1H Description Extra-low torque side rotary Circuitry SPDT, double break Contacts Silver Sealing NEMA 1 Electrical rating (B) NEMA B600 Body style Plug-in Conduit (NPT) 0.5 in Pretravel 15 max. Differential travel 5 max. Overtravel 60 min. Total travel 75 nom. Operating torque 0,085 Nm [1 in-oz] max Honeywell Sensing and Control

35 Heavy Duty Limit Switches MICRO SWITCH HDLS SERIES NOMENCLATURE LS A 1A Switch Type HDLS Series Heavy-Duty Limit Switch * or after the LS indicates special metric conduit threads: = PG 1,5 = 0 mm A B C D E F G H J K L M N P R S T U V W Head Style Side rotary; momentary 1 to 1 pretravel Top rotary; momentary 1 to pretravel Top plunger, plain Top plunger, roller Side plunger plain; momentary Side plunger roller; momentary Side plunger plain; maintained Side rotary, momentary; low PT, low torque Wobble stick Whisker Side rotary; sequential Side rotary; central neutral Side rotary; maintained Side rotary, momentary; low PT and DT Side rotary, momentary; low torque Side rotary, gravity return, ex. low torque Side rotary, momentary; extremely low torque Side rotary, momentary; 5 max. pretravel Top plunger, adjustable Side plunger, adjustable NOTE: Not all combinations of model code are available. Please contact your local Honeywell provider for assistance. 1A 1E 1F 1G 1H 5A 8A 9A K N P B C D F G H R S T U Plug-in, single pole standard switch Plug-in, single pole gold contacts Plug-in, single pole manifold mounting Plug-in, single pole gold ctcs, manifold mtg Plug-in, single pole low force Plug-in, single pole 10 V neon indicator Plug-in, single pole 0 V neon indicator Plug-in, single pole V LED indicator Non-plug-in, single pole standard switch Non-plug-in, single pole NC direct acting Non-plug-in, single pole low force, low differen. Plug-in, double pole standard switch Plug-in, double pole sequential Plug-in, double pole center neutral Plug-in, double pole standard switch, manifold mounting Plug-in, double pole sequential, manifold mounting Plug-in, double pole center neutral, manifold mounting Plug-in, double pole 10 V neon indicator / in conduit Plug-in, double pole standard switch, gold contacts Plug-in, double pole sequential, gold contacts Plug-in, double pole center neutral, gold contacts Body/Basic Switch Code 6B 6C 6D 6R 6S 6T 6U L M N S T U 7L 7M 7N 7S 7T 7U Plug-in, double pole standard switch, 1/ in conduit Plug-in, double pole sequential, 1/ in conduit Plug-in, double pole center neutral, 1/ in conduit Plug-in, double pole 10 V neon indicator, 1/ in conduit Plug-in, double pole stnd switch, gold ctcs., 1/ in conduit Plug-in, double pole sequential, gold ctcs., 1/ in conduit Plug-in, double pole cntr neutral, gold ctcs., 1/ in conduit Non-plug-in, dbl pole standard switch / in conduit Non-plug-in, dbl pole sequential / in conduit Non-plug-in, dbl pole center neutral Non-plug-in, dbl pole standard switch, gold contacts Non-plug-in, dbl pole sequential, gold contacts Non-plug-in, dbl pole center neutral, gold contacts Non-plug-in, dbl pole standard switch, 1/ in conduit Non-plug-in, dbl pole sequential, 1/ in conduit Non-plug-in, dbl pole center neutral, 1/ in conduit Non-plug-in, dbl pole stnd switch, gold ctcs., 1/ in conduit Non-plug-in, dbl pole sequential, gold ctcs., 1/ in conduit Non-plug-in, dbl pole cntr neutral, gold ctcs., 1/ in conduit Mod. code A B C E J M P R S X BB DD PA XA PB Description Modification Code See table HDLS SERIES MODIFICATION CODE TABLE -pin mini-style 5-pin mini-style 5-conductor STOW-A cable, 6 ft -conductor SJTOW-A cable, 6 ft 8-pin mini-style 9-conductor STOOW-A cable, 6 ft 5-conductor STOOW-A cable, 1 ft 9-pin mini-style 5-pin micro-style 9-conductor STOOW-A cable, 1 ft -foot mini-style pigtail, single pole -pin micro-style with jumper 5-conductor STOOW-A cable, 8 ft 9-conductor STOOW-A cable, 8 ft 5-conductor STOOW-A cable, 0 ft 1 Clockwise head rotation Counterclockwise head rotation Head assembled with actuator to right side Head assembled with actuator to left side 5 Head assembled with actuator toward mounting surface 6 Roller perpendicular to mounting surface 7 Indicator light wired to normally closed circuit 8 Roller on side plunger in vertical position Honeywell Sensing and Control 5

36 6 Honeywell Sensing and Control MICRO SWITCH HDLS Series LSA1A LSA1A LSAB LSAK LSAK-7AA LSDK LSF1A8 LSF1E LSMD LSYDC1A LSYDC1E LSYVC1A LSYVC1E LSA1A LSA1E LSAB LSAK LSAK-1B LSAK-B LSAK-7AA LSC1A LSCK LSD1A LSDK LSF1A LSFB LSH1A LSJ1A-7A LSJ1A-7M LSJ1A-7N LSJB-7N LSK1A-8A LSK1A-8C LSL6C LSMD LSN1A LSNB LSP1A LSW1A LSYAC1A LSYDC1E LSA1A LSA1A1 LSA1A1-1A LSA1A1-1B LSA1AJ LSA1A1 LSA1A1 LSA1A15 LSA1A-1A LSA1A-1B LSA1A-1C LSA1A-1D LSA1A-1F LSA1A-1L LSA1A-1M LSA1A1S LSA1A LSA1A-J LSA1A-A LSA1A-B LSA1A-C LSA1A-D LSA1A-E LSA1A-J LSA1A-K LSA1A This datasheet supports the following MICRO SWITCH HDLS Series Heavy-Duty Limit Switches. LSA1A-1B LSA1A-5C LSA1AA-1A LSA1A LSA1A- LSA1A-M LSA1A-N LSA1A-R LSA1A5 LSA1A-9B LSA1AA LSA1AB LSA1AB-1B LSA1AC LSA1AC-C LSA1AC-M LSA1AP-1B LSA1APA LSA1E LSA1E-1B LSA1E-A LSA1E-D LSA1F LSA1J LSA1J1B LSAB LSAB15-5D LSAB-1A LSAB-1B LSAB-1C LSAB-1D LSAB5-5D LSAB-A LSAB-B LSAB-C LSAB-D LSAB-5C LSAB LSAB5 LSABM LSABM-1B LSAF LSAR LSAS LSAK LSAK1 LSAK1-1A LSAK1-1B LSAK-1A LSAK-1B LSAK1C-1C LSAK-1D LSAK-1N LSAK-A LSAK-B LSAK-C LSAK-D LSAK-J LSAK LSAK LSAK-1A LSAK-1B LSAK-1D LSAK-M LSAK-N LSAK-R LSAK-5C LSAKA LSAKC LSAN LSAN1-J LSAL LSAL1 LSAL-1A LSAL-1B LSAL-1D LSAL LSAL-A LSAL-B LSAL-1D LSAL LSAL-1D LSAL-N LSAS LSA5A LSA5A15 LSA5A-1A LSA5A-1B LSA5A-1C LSA5A-1D LSA5A5 LSA5A-N LSA5A7B LSA5AB-1A LSA5AB-1B LSA5ADD LSA6B LSA6B1 LSA6B-1A LSA6B-1B LSA6B-1D LSA6B-1F LSA6B-1L LSA6B-B LSA6B-C LSA6B-D LSA6B-D LSA6B-C LSA6BR LSA6R LSA6S LSA7L LSA7L-1A LSA7L-1B LSA7L-1C LSA7L-1D LSA7L LSA7L-D LSA7L-J LSA7L-1B LSA7L LSA7L-N LSA7L-R LSA7L-5C LSA7LR LSA8A LSA8A7 LSA9A LSA9A-1A LSA9A LSA9A-L LSA9ADD LSA9EDD LSB1A LSB1A1 LSB1A-1B LSB1A LSB1A-M LSB1A-N LSB1AC LSB1E LSB1J LSBB LSBR LSBK LSBK-1B LSBK-1D LSBK-C LSBL LSB5A LSB5A-D LSB6B LSB6B-N LSB7L LSB7L-1B LSB9A LSC1A LSC1E LSC1J LSCB LSCC LSCK LSCKC LSCL LSC5A LSC6B LSC6C LSC7L LSC8A LSD1A LSD1A6 LSD1E LSD1F LSDB LSDF LSDK LSDK6 LSDL LSD5A LSD5A7 LSD6B LSD7L LSD8A LSD9A LSE1A LSE1A LSE1A LSE1A5 LSE1ADD LSE1E LSE1E LSEL LSE5A LSE6B LSE6B5 LSE6S LSE7L LSE7L LSE9A LSF1A LSF1A LSF1A LSF1A5 LSF1A8 LSF1E LSF1F LSFB LSFC LSFK LSFK LSFK-B LSFK LSFK5 LSFK8 LSFN LSFL LSF5A LSF6B LSF6B LSF6C LSF7L LSF7L LSF7L LSF7L5 LSF7L8 LSF8A LSF9A LSG1A LSG1E LSGB LSGK LSGL LSG5A LSG7L LSG9A LSH1A LSH1A1 LSH1A-1B LSH1A LSH1A-B LSH1A-D LSH1AB LSH1E LSH1E-1A LSHB LSHB-1B LSHB-D LSHK LSHL LSHL1 LSHL-1B LSHL LSH5A LSH5A-1L LSH5A-N LSH6B LSH6B-1B LSH7L LSH9A LSH9A7 LSJ1A LSJ1A-1N LSJ1A-7A LSJ1A-7M LSJ1A-7N LSJ1AB-7M LSJ1AB-7N LSJ1AC-7M LSJ1AC-7N LSJ1ADD-7A LSJ1E-7A LSJ1E-7M LSJ1J-7A LSJ1JDD-7A LSJB-7A LSJK LSJK-7A LSJL-7A LSJL-7M LSJ5A-7A LSJ5A-7M LSJ5A-7N LSJ6B LSJ6B-7A LSJ7L-7A LSJ7L-7N LSJ8A-7A LSK1A LSK1A-8A LSK1A-8B LSK1A-8C LSK1E-8A LSK1E-8C LSKB-8A LSKK LSKK-8B LSKL-8C LSK5A-8A LSK5A-8B LSK5A-8C LSK6B LSK7L-8A LSK7L-8B LSK7L-8C LSK8A-8A LSK8A-8B LSK8A-8C LSK9A-8C LSLC LSLC-D LSLG LSLM LSLM LSL6C LSL6C-N LSL7M LSL7M-1P LSMD LSMD-1A LSMD-1B LSMD-1D LSMD-B LSMD-D LSMD-J LSMDM LSMH LSMU LSMN LSMN-1A LSMN-1B LSMN-B LSMN-D LSM6D LSM6D-1B LSM6D-1D

37 Honeywell Sensing and Control 7 Heavy Duty Limit Switches LSM6D-1F LSM6D-1P LSM6D-A LSM6D-B LSM6D LSM6D-D LSM6D LSM6D-5D LSM6D-N LSM6D-5B LSM6U LSM7N LSM7N-1A LSM7N-1B LSM7N-1D LSM7N LSM7N- LSM7U LSM7U-D LSN1A LSN1A-1B LSN1A-C LSN1A-A LSN1A-B LSN1A-D LSN1A-P LSN1A-S LSN1E LSN1E-1A LSN1F LSN1F-1B LSNB LSNK LSNKD LSNN LSNL LSNL-D LSNL-B LSNL-D LSN5A LSN5A-P LSN6B LSN6B-B LSN6B-D LSN7L LSN7L-D LSN8A LSN8A7 LSN9A LSN9ADD LSN9EDD LSP1A LSP1A-1B LSP1A-1C LSP1A-1D LSP1A LSP1A5 LSP1A-A LSP1A-D LSP1A LSP1AB LSP1A-M LSP1A5-1C LSP1AB LSP1E LSP1E-1A LSP1F LSPB LSPB-1B LSPB-D LSPK LSPK-1B LSPK-1D LSPK LSPL LSPL LSP5A LSP5A7 LSP6B LSP7L LSP7L-D LSP7L LSP7S LSP8A LSQA1A1 LSQA1A1 LSQH1A LSQR1A16 LSR1A LSR1A-1A LSR1A-1B LSR1A-K LSR1A-N LSR1A-5C LSR1ADD LSR1E LSRB LSRB-N LSRK LSRK1 LSRL LSR5A LSR6B LSR6B-D LSR6B-L LSR6B-M LSR7L LSR7L-D LSR9A LSS1H LSS1H-N LSS1HDD LST1H LST1H-1C LSU1A LSU1A-1 LSU1A-1B LSU1A-1D LSU1A-B LSU1A-D LSU1A LSU1A-R LSU1E LSU1J LSUB LSUK LSUK1 LSUK-1A LSUK-J LSUL LSU5A LSU6B LSU7L LSU8A LSU9A LSV1A LSV1A-B LSV1E LSVB LSVL LSV5A LSV6B LSW1A LSW1A LSW1A5 LSW1AC LSW1E LSWB LSWL LSW5A LSYAB1A LSYAB1A-1B LSYAB1A-A LSYAB1AB LSYAB1AC LSYAB1E LSYAB1E-B LSYAB1E-B LSYAB1F LSYAB1J LSYABB LSYABB LSYABF LSYABS LSYABK LSYABK-1B LSYABK-5D LSYABN LSYABL LSYABL-1B LSYABL LSYABL-A LSYABL LSYABS LSYAB5A LSYAB6B LSYAB6B-1B LSYAB6B-D LSYAB7L LSYAB7L-1A LSYAB7L-B LSYAC1A LSYAC1A1-1D LSYAC1A-1B LSYAC1A-D LSYAC1ADD LSYAC1ADD-1B LSYAC1AH LSYAC1E LSYAC1J LSYACB LSYACR LSYACS LSYACK LSYACKP LSYACN LSYACL LSYAC5A LSYAC6B LSYAC6B-1A LSYAC6B-1B LSYAC6B-L LSYAC7L LSYAC9A LSYAC9AB LSYBBB LSYBBK LSYBBKP-FP LSYBBL LSYBB5KP-FP LSYBC1A LSYBCK LSYBC5A LSYBC9A-1D LSYCB1A LSYCB1E LSYCB1J LSYCBL LSYCBSX-FP LSYCB6B LSYCC1A LSYCC1ADD LSYCC1AE LSYCCK LSYCCL LSYCCLX-FP LSYCC5A LSYCC6B LSYCC7L LSYDB1A LSYDBB LSYDBK LSYDBL LSYDB6B LSYDB7L LSYDC1A LSYDC1ADD LSYDC1AE LSYDCK LSYDC5A LSYDC5AE LSYDC6B LSYDC7L LSYFB1A LSYFBK LSYFBK LSYFBK LSYFBL LSYFB7L LSYFC1A LSYFC1ADD LSYFC1AE LSYFCK LSYFC7L LSYFC7L LSYFC7L LSYGB1A LSYHB1A LSYHC1A LSYHCK LSYHCKA LSYHCL LSYHC7L LSYJB1A-7A LSYJB1E-7A LSYJB1J-7A LSYJBK-7A LSYJB5A-7A LSYJC1A-7A LSYJC1ADD-7A LSYJCK-7A LSYLBM LSYLB6C LSYLB6T LSYLB7M LSYLB7T LSYLCC LSYLCM LSYLC6C LSYMBD LSYMBN LSYMBN-K LSYMB6D LSYMB6D-D LSYMB7N LSYMB7N-1C LSYMB7N-1D LSYMB7N-1A LSYMCN LSYMC6D LSYMC6DF LSYMC7N LSYNB1A LSYNB1AC LSYNBB LSYNBK LSYNBL LSYNB5A LSYNB7L LSYNC1A LSYNC1ADD LSYPB1A LSYPB1AC LSYPBB LSYPBK LSYPBL LSYPBL-1B LSYPB6B LSYPB7L LSYPC1A LSYPC1J LSYPCB LSYPCK LSYRB1A LSYRB6B LSYRC1A LSYRC1ADD LSYRCB LSYRCL LSYRC9A LSYUB1A LSYUB1A1 LSYUB1A1-D LSYUB1A LSYUBB LSYUBK LSYUB6B LSYUB9AC LSYUC1A LSYUC1A-1B LSYUC1ADD LSYUC6B LSYUC9ADD LSYVBK LSYVC1A

38 MICRO SWITCH HDLS Series ALSO AVAILABLE Fully potted MICRO SWITCH HDLS heavy-duty limit switches provide an extra degree of protection in harsh environments by sealing the basic switch cavity with epoxy. These switches are the same as the nonplug-in HDLS except that the entire switch cavity is filled with epoxy in addition to the conduit entrance. The fully potted HDLS switches are pre-leaded, with either cable or connectors. Excellent sealing capability for harsh-duty food and beverage wash downs and severe machine tool environments Extra diaphragm sealing 1 inch STOOW-A cable or connector version (other lengths available) Cable versions: NEMA 1, 6, 6P, 1 Connector versions: NEMA 1, 6, 6P, 1, 1 All fluorocarbon seals (low temperature available) UL, CSA, CE, CCC MICRO SWITCH HDLS switches are also available in all stainless-steel versions. Designed for use in highly corrosive environments, such as petrochemical plants, food processing plants, shipboard, and dockside locations. The type 16 cast stainless steel body is designed to minimize crevices where food particles could become trapped in water. The actuator, operating head, and screws are also stainless steel. All seals are fluorocarbon to provide excellent chemical resistance and to withstand operating temperatures up to 11 C [50 F] and pressurized steam cleaning. Pre-leaded and epoxy-filled versions also available. Corrosion-resistant stainless steel non-plug in body, head, and rotary shaft Stainless steel levers Fluorocarbon seals NEMA 1,, R,, X, 6, 6P, and 1 UL, CSA, CE, CCC To learn more about Honeywell s HDLS products, call or Honeywell Sensing and Control