Product Range Guide MICRO SWITCH Hazardous Area Switches

Transcription

1 Product Range Guide MICRO SWITCH Hazardous rea Switches

2 Rugged. Reliable. Ready for use. Honeywell has a complete family of hazardous area limit switches tailored to exact specifications for superior performance, extended productivity and increased safety. Reduce operational and maintenance costs with Honeywell s hazardous area limit switches. Reliable and robust, these flexible switches are designed for a wide range of industrial applications, from mud pumps, valve positioning and pig position detectors to gate/door monitoring, conveyors and many more. Count on Honeywell for global support, exceptional quality, and innovative design and technology.

3 Designed to endure the toughest applications Features highlighted below relate to the MICRO SWITCH X, LSX, GSX, and CLSX Series Sintered, bronze bearings enable longer operating life and increase resistance in corrosive environments Field adjustability of operating head matches switch to application oss-and-socket head design for more secure head-to-body retention Twin shaft seals for improved environmental protection. Optional fluorosilicone seals extend operating temperature down to -40 C [-40 F] Dual bearings deliver enhanced mechanical life Diaphragm seal adds an extra measure of dynamic sealing between head and body Rugged zinc head and aluminum body are phosphate treated and epoxy coated Two flame paths: one in the cover-housing threads; another between the switch cavity and head V5W: Cover o-ring seal maintains NEM and IP environmental sealing for the switch cavity explosion-proof basic switch GXE: compact footprint with SPDT capabilities and pre-leaded cable 0.5 in or 0.75 in conduit options 4CE00: smallest available footprint with pre-leaded cable VPX: CX: designed for use with valves Valve position indicator designed for outdoor use in hazardous atmospheres EX: original hazardous area MICRO SWITCH with the largest installed base

4 Hazardous rea Switches X, X, LSX, GSX, CLSX Series X Series global history of rugged performance in explosive environments and a broad portfolio of options to meet your needs Choice of aluminum or stainless steel housings for use in non-corrosive and corrosive environments Designed for use in the toughest climates (-40 C to 70 C [-40 F to 58 F]) Silver contacts available for switching power loads and gold contacts for switching low-power loads Mounting pattern is interchangeable with the iconic HDLS MICRO SWITCH platform Multiple actuator & switching combinations are available LSX Series Weather-sealed product for operation in explosive environments in North merica Silver contacts available for switching power loads and gold contacts for switching low-power loads Mounting pattern is interchangeable with the iconic HDLS MICRO SWITCH platform Optional availability for use in low temperatures (-40 C [-40 F]) Multiple actuator & switching combinations are available GSX Series Combines proven MICRO SWITCH global safety limit switch product with an explosion-proof design to create a hazardous area safety switch PPLICTIONS Control valves and actuators Gate position detection Grain handling equipment Mining conveyors Mud pumps Offshore drilling Oil and gas drilling rigs Paint booths Pulp and paper coating Valve position monitoring Waste treatment Designed to ensure that even welded contacts will open and machine will stop in emergency situations SIL rating for use in safety applications Switching contacts with positive break Optional gold contacts for switching low-power load For use on gates, cages, panels, and other applications requiring a machine to stop in an emergency CLSX Series Cable-pull switch designed for emergency stop protection in explosive environments Cable lengths may be 00 ft in straight line Positive opening of normally closed (NC) contacts For use with conveyors, perimeter guarding and more 4 sensing.honeywell.com

5 X (0 mm): TEX, IEC Ex, NEPSI Ex X (NPT): TEX, culus, IEC Ex, KOSH, NEPSI Ex X (0 mm/npt): TEX, culus, IEC Ex, NEPSI EX, IN METRO, EC NEM 7 (Gas) Div &, Class I, Groups, C, & D; NEM 9 (Dust) Div &, Class II, Groups E, F, & G II G Ex d IIC T6 Gb II D Ex tb IIIC T85 C Db X LSX GSX CLSX UL, CS NEM 7 (Div. &, Class I, Groups, C, & D) NEM 9 (Div. &, Class II, Groups E, F, & G) gency pprovals Hazardous rea Designations IP67; NEM,, 4, 6, IP67; NEM,, 4, 6, Sealing aluminum, epoxy coated stainless steel side rotary, side rotary (maint.) side pin plunger, side pin plunger adj. side roller, side roller adj. top rotary, top pin plunger, top pin plunger adj. top roller plunger, wobble 0.5 in - 4NPT conduit, 0.75 in - 4NPT conduit, 0 mm conduit NC NO SPDT snap action, double break NC NO DPDT snap action, double break NC NO DPDT snap action, double break, sequential NC NO DPDT snap action, double break, center neutral NC NO slow action, double break -40 C to 70 C [-40 F to 58 F] culus, TEX, IEC Ex, IN METRO NEM 7 (Gas) Div. &, Class I, Groups, C, & D NEM 9 (Dust) Div. &, Class II, Groups E, F, & G II G; Ex d IIC T6 II D; Ex d td T85 C IP67; NEM, 4, 6,, UL, CS NEM 7 (Gas) Div. &, Class I, Groups, C, & D NEM 9 (Dust) Div. &, Class II, Groups E, F, & G NEM,, 4, aluminum, epoxy coated Housing Material aluminum, epoxy coated aluminum, epoxy coated side rotary, side rotary (maint.) side plunger, side plunger adj. side roller, side roller adj. top rotary, top plunger, top roller plunger, wobble 0.5 in - 4NPT conduit, 0.75 in - 4NPT conduit, 0 mm conduit NC NO SPDT snap action, double break NC NO DPDT snap action, double break NC NO DPDT snap action, double break, sequential NC NO DPDT snap action, double break, center neutral - C to C [0 F to 50 F] optional (-40 C [-40 F]) ctuators/levers Termination Circuitry Operating Temp. (std) side rotary, top pin plunger, top roller plunger, top roller lever 0.5 in - 4NPT conduit, 0 mm conduit NC NO snap action, NC NO snap action, NC slow action, NO slow action, NC NO M slow action, NC NO M slow action, NC NO M slow action, NC NO M slow action, NC NO M slow action, 4NC slow action -40 C to 70 C [-40 F to 58 F] cable/rope, maintained 0.5 in - 4NPT conduit, 0 mm conduit NC direct acting, NO NO direct acting, NC direct acting - C to 70 C [0 F to 58 F] 0 (thermal) 0 (thermal) mp Rating 0 (thermal) 0 (thermal) C5 600; DC R00 C5 600; DC R00 Voltage C5 00, C5 500 C5 600, DC Q00 External and internal Internal Grounding screw External and internal Internal 4 Vdc, 50 Vdc 0 Vac, 40 Vac, 600 Vac 5

6 MICRO SWITCH Hazardous rea Switches X, X, and LSX Series X F K Switch Type X Series luminum Hazardous rea Limit Switch X Series Stainless Steel Hazardous rea Limit Switch Conduit Threads 4 ½ or ¾ NPT** 0 mm ** see ody/asic Switch Code column NOTE: if / NPT or /4 NPT conduit is desired, no code is necessary. Leaveblank. If conduit code 4 in this column is selected, conduit in ody/asic Switch column does not apply. * C * D * E * F * H* J K L * M* N* P * R * V W Head Style* Side rotary; Top rotary; Top pin plunger, Top roller plunger, Side pin plunger; Side roller plunger; Side rotary, ; low PT, low torque Wobble stick Cat whisker Side rotary; sequential, Side rotary; central neutral, Side rotary; maintained Side rotary, ; low PT and DT Side rotary, ; low torque Top pin plunger, adjustable, Side pin plunger, adjustable, Not available with conduit code 4. E E K 4K 4L 4M 4N 4S 4T 4U 7L 7N 7S 7T 7U ody/asic Switch Code NC/NO, slow acting, /4-4 NPT NC/NO, slow acting, /4-4 NPT gold-plated contacts NC/NO, snap action, / -4 NPT gold-plated contacts NC/NO, snap action, / - 4 NPT NC/NO, snap action, /4-4 NPT NC/NO, snap action, /4-4 NPT NC/NO, snap action, sequential, /4-4 NPT NC/NO, snap action, center neutral, /4-4 NPT NC/NO, snap action, /4-4 NPT gold-plated contacts NC/NO, snap action, sequential, /4-4 NPT, gold-plated contacts NC/NO, snap action, center neutral, /4-4 NPT, gold-plated contacts NC/NO, snap action, / - 4 NPT NC/NO, snap action, center neutral, / - 4 NPT NC/NO, snap action, / -4 NPT gold-plated contacts NC/NO, snap action, sequential,/ -4 NPT, gold-plated contacts NC/NO, snap action, center neutral, / -4 NPT, gold-plated contacts * X stainless steel head styles and actuators available ctuator Modification CW rotation 8 CCW rotation Right-oriented actuator head assembly Left-oriented actuator head assembly Head assembled with actuator to mounting surface Roller perpendicular to mounting surface Roller parallel to mounting surface C C J K S 4M 5 5C 7 8 ctuator Options Fixed Ø 0.75 in x 0.5 in W * nylon roller,.5 in radius, front mount Fixed Ø 0.75 in x 0.5 in W * nylon roller,.5 in radius, back mount djustable, Ø 0.75 in x * 0.5 in W nylon roller. front mount djustable, Ø 0.75 in x * 0.5 in W nylon roller. back mount djustable, Ø.0 in x 0.5 in W nylon roller, front mount djustable, Ø.0 in x 0.5 in W nylon roller, back mount Yoke, Ø 0.75 in x 0.5 in W nylon rollers, same side, back mount Hub rod, aluminum Offset, Ø 0.75 in x 0.5 in W nylon roller, back mount Offset, Ø 0.75 in x 0.5 in W nylon roller, front mount Plastic wobble stick Cat whisker, 5.5 in To order high temperature versions, insert the additional letters Y and C in the appropriate places in the standard catalog listing, as shown below: XK XYCK standard, side-rotary plug-in switch completely FC-sealed version of XK Levers for Side Rotary ctuated Switches Code Catalog Listing Material Roller Dia. (in) Roller Width (in) Fixed.5 inch radius Rollerless n/a n/a n/a Roller Mounting LSZ5 Nylon Front C LSZ5C Nylon ack djustable.5 in to.5 in radius Rollerless n/a n/a n/a LSZ5 Nylon ack C LSZ5C Nylon Front J LSZ5J Nylon Front K LSZ5K Nylon Front Yoke.5 in radius E LSZ5E Nylon ack/ Front M LSZ5M Nylon ack/ Front Code Catalog Listing Material Roller Dia. (in) Roller Width (in) Roller Mounting S LSZ5S Nylon Front/ Front Rod 4 Hub only n/a n/a n/a 4M LSZ54M lum, 5.5 in n/a n/a n/a Offset.5 in radius 5 Rollerless n/a n/a n/a 5 LSZ55 Nylon ack 5C LSZ55C Nylon Front Wobble stick 7 LSZJG Delrin rod, 5.5 n/a n/a n/a Short fixed -. in radius 9 LSZ59 Nylon Front 9C LSZ59C Nylon ack 6 sensing.honeywell.com

7 5,85 [.04] 9,6 [.56] 9,8 [0.78] 6,6 [.46],75 [.5] 5,4 [.00] 49,5 [.94] mtg. pads 85,7 [.75] 46,48 [.8] 96,77 [.8] 46,05 [5.75] Ø 76, [Ø.00] 0,65 [4.75] X Ø 5,6 [0.0] mounting holes 8, [.50] X 5/6-8 UNC- Tapped from rear, [0.875] min. 5,4 [.00] LSX Switch Type LSX Series Hazardous rea Switch C D E F H J K L M N P R U V W J Head Style Side rotary; Top rotary; Top plunger, plain Top plunger, roller Side plunger plain; Side plunger roller; Side rotary, ; low PT, low torque Wobble stick Whisker Side rotary; sequential Side rotary; central neutral Side rotary; maintained Side rotary, ; low PT and DT Side rotary, ; low torque Side rotary, low pre-travel Top plunger, adjustable Side plunger, adjustable K Circuitry and Conduit Connection E K N 4K 4L 4M 4N 4S 4T 4U 7L 7M 7N 7S 7T 7U NO/NC, gold contacts, /-4NPT NO/NC, /-4NPT SPNC direct acting, /-4NPT NO/NC, /4-4NPT NO/NC, /4-4NPT NO/NC, /4-4NPT, sequential operation NO/NC, /4-4NPT, center neutral NO/NC, gold contacts, /4-4NPT NO/NC, gold contacts, /4-4NPT, sequential operation NO/NC, gold contacts, /4-4NPT, center neutral NO/NC, /-4NPT NO/NC, /-4NPT, sequential operation NO/NC, /-4NPT, center neutral NO/NC, gold contacts, /-4NPT NO/NC, gold contacts,/-4npt, sequential operation NO/NC, gold contacts,/-4npt, center neutral Modification Code CW rotation 8 CCW rotation 7,8 [.88] Head assembled with actuator to right side Head assembled with actuator to left side Head assembled with actuator toward mounting surface Roller perpendicular to mounting surface Roller on side plunger in vertical position ** Levers can be ordered separately. See Levers for Side Rotary ctuated Switches table 4,5 [.6] C C J K E M S 7 ctuator Options** Fixed roller,.5 in radius Fixed 0.75 in x 0.5 in nylon roller,.5 in radius Fixed 0.75 in x 0.5 in nylon roller,.5 in radius djustable, rollerless djustable, 0.75 in x 0.5 in nylon roller djustable, 0.75 in x 0.5 in nylon roller djustable,.0 in x 0.5 in nylon roller djustable, 0.5 in x 0.5 in nylon roller Yoke, 0.75 in x 0.5 in nylon roller Yoke, 0.75 in x 0.5 in nylon roller Yoke, 0.75 in x 0.5 in nylon roller, same side 4 Hub only 4M 5 5 5C C Hub rod, aluminum Offset, rollerless Offset, 0.75 in x 0.5 in nylon roller Offset, 0.75 in x 0.5 in nylon roller Plastic wobble stick Whisker, 5.5 in Fixed, 0.75 in x 0.5 in nylon roller, open,. in radius Fixed, 0.75 in x 0.5 in nylon roller, closed,. in radius Honeywell MICRO SWITCH X Series and LSX have consistent dimensions Not all combinations available. Please contact Honeywell for assistance. To order high temperature versions, insert the additional letters Y and C in the appropriate places in the standard catalog listing, as shown below: LSXK LSXYCK standard, side-rotary plugin switch completely FC-sealed version of LSXK To order low temperature versions, insert the additional letters Y and in the appropriate places in the standard catalog listing, as shown below: LSXK LSXYK standard, side-rotary plugin switch low-temperature version of LSXK 7

8 MICRO SWITCH Hazardous rea Switches GSX Series 67,6 [.66] 9,97 [.8] 8, [.50] X 7,4 [0.9] 0,0 [4.7] Ø 76, [Ø.00] 54, [6.07] 7, [5.0],4 [5.5] 55, [.8] X 5, [0.] Conduit entry X 5, [0.] 44,5 [.75],8 [.5] 6,6 [0.64] 7,0 [.84] GSX Switch Type 0 Conduit Connection Circuitry Head Style GSX Series Hazardous rea Safety Switch C 8 / in NPT 0 Snap action, NC/NO Side rotary; FIixed length roller 9,0 mm x 6,5 mm [0.75 ian x 0.5 in] nylon roller Clockwise rotation Counter-clockwise rotation Head assembled with actuator to right side 4 Head assembled with actuator to left side 5 Head assembled with actuator to mounting surface 6 Roller perpendicular to mounting surface PG.5 0 NC/ NO, M Top pin plunger Yoke roller C 4,4 mm x,7 mm [.0 in x 0.5 in] nylon roller 0 mm 04 NC/ NO, M C Top roller plunger 5 Offset roller D 8, mm x 6,5 mm [.5 in x 0.5 in] nylon roller 05 NO D Top roller lever 06 NC W 07 Snap action, NC/NO, gold contacts Y 0 Snap action, NC/NO Snap action, NC/NO, gold contacts NC/NO, M 4 NC/NO, M, gold contacts 5 NO, gold contacts 6 NC, gold contacts 40 4NC 4 4NC, gold contacts 4 NC/NO, M 4 NC/NO, M, gold contacts 44 NC/NO, M 45 NC/NO, M, gold contacts 46 NC/NO, M 47 NO/NC, center neutral, high fidelity contacts, 0.5 in tap Modifications/ Specials Lever Roller ctuator Style E 9,0 mm x 6,5 mm [0.75 ian x 0.5 in] bronze roller 40 mm x,7 mm [.5 in x 0.5 in] bronze roller 50,9 mm x,7 mm [.0 in x 0.5 in] rubber roller sensing.honey well.com

9 MICRO SWITCH Hazardous rea Switches CLSX Series 9, [.5] 8,8 [.0] Manual reset button,59 [0.85] 8, [.50] 58,4 [6.] 46,05 [5.75] 46,48 [.8] 86, [.9] 96,77 [.8] 8,78 [5.07] Ø 76, [Ø.00] mtg. pads 0,65 [4.75] 50,8 [.00] X 5/6-8 UNC- Tapped from rear, [0.875] min. 4,5 [.6] 7,8 [.88] 5,4 [.00] CLSX Switch Type CLSX Series Hazardous rea Safety Switch E Conduit Connection 0.5 in NPT conduit opening 0.75 in NPT conduit opening NC direct acting 4 Circuitry NO/NC snap action NO/NC direct acting N ody and Operation Maintained, red body Momentary, blue body Maintained w/o broken cable detection, red body E F Modification Code NO/NC, slow acting NO/NC, slow acting NO/NC, slow acting gold plated 8 NC direct acting Head oriented, left 9 Special basic - see lettered modifications Head oriented, front Head oriented, rear 9

10 Hazardous rea Switches CX, EX, 4CE00, GXE Series CX Series Weather-sealed, explosion-proof switch designed for outdoor use in hazardous atmospheres bility to monitor quarter-turn and linear valve position utomates existing, non-automated valves Pin plunger and side-rotary versions Hermetically sealed elements available Housing available in short and standard lengths vailable with analog 4 m to 0 m output and/or discrete switching capabilities Optional gold contacts for switching low-power load Up to six NC and six NO contacts EX Series The original hazardous area MICRO SWITCH with the largest installed base Mounts from any of four sides Hermetically sealed elements available Option for two conduit openings Variety of levers and actuators Optional gold contacts for switching low-power load High temperature versions available (04 C [400 F]) 4CE00 Series Gang-mounting capability adds to application design flexibility for smaller machines and instruments PPLICTIONS Control valves and actuators Gate position detection Grain handling equipment Mining conveyors Mud pumps Offshore drilling Oil and gas drilling rigs Paint booths Pulp and paper coating Valve position monitoring Waste treatment Use where limited space is available vailable with pin and roller plunger actuators Pre-leaded to minimize installation and procurement costs Optional gold contacts for switching low-power load GXS Series Compact, pre-leaded switch with DIN-sized body EN mounting compatible (GXE Series) EN 5004 mounting compatible (GX Series) Double insulated switch cavity provides a second layer of electrical circuit protection Pre-wired; variety of heads, levers, and actuators Compact footprint for use where space is limited 0 sensing.honeywell.com

11 CX EX UL, CS, [TEX (CE), IEC Ex, IN METRO (select models)] UL, CS, TEX (CE), IEC Ex NEM 7 (Gas): Class I, Div. & Div., Groups (4CX, 6CX, 4CX, 6CX, 6CX only), C, and D; NEM 9 (Dust): Class II, Div. & Div., Groups E, F, and G TEX/IEC Ex, INMETRO (Gas) II G; Exd IIC T6 TEX/IEC Ex, INMETRO (Dust) II D; Exd td T85 C NEM 7 (Gas): Div. &, Class I, Groups, C, & D (select models) NEM 9 (Dust): Div. &, Class II, Groups E, F, & G II G; EEx d II + H T6 NEM,, 4, 4X, 6, 6P, and ; IP66 NEM aluminum epoxy coated, bronze aluminum, epoxy coated side rotary (choice of levers), side rotary (with flat shaft), plunger actuator side rotary, top pin plunger, top roller plunger, manual /4-4 NPT, M5 x,5 mm conduit / in - 4NPT conduit, lead wires NC NO SPDT, NC NO DPDT, 6NC 6NO, 4 m to 0 m analog output, 4NC 4NO NC NO SPDT snap action, NC NO SPDT maintained, NC NO DPDT snap action -5 C to 85 C [- F to 85 F] -40 C [-40 F] optional -40 C to 7 C [-40 F to 60 F], 0, 5, 0,, 0, 5, 0 0 Vac, 40 Vac, 480 Vac, 8 Vdc, 5 Vdc, 50 Vdc 5 Vac, 50 Vac, 480 Vac, 5 Vdc, 50 Vdc external and internal external and internal 4CE00 GXE GX TEX (CE) TEX (CE), IEC Ex II G; Ex d IIC T6 II D; Ex td T85 C II G; EEx d IIC T6 II D; Ex td T85 C IP65, (IP66/IP67 boot sealed plungers) IP66/67 Housing Material zinc, epoxy coated zinc, epoxy coated ctuators/levers top pin plunger, top roller plunger, cross-roller plunger side rotary, top pin plunger, top roller plunger cable (various lengths) 5 m cable NC NO SPDT snap action NC NO SPDT snap action 0 C to 70 C [ F to 58 F] -0 C to 75 C [-4 F to 67 F] (thermal), 5 (thermal) 5 (thermal) C4 D00 DC R00 C5, 4 50 V DC, V external and internal (ground wire provided) none, double insulated gency pprovals Hazardous Designations Sealing Termination Circuitry Operating Temp. mp Rating Voltage Grounding screw

12 MICRO SWITCH Hazardous rea Switches EX Series MICRO SWITCH EX Series Listings Catalog Listing ctuation Type ctuation Contact Electrical Rating* EX-R Roller Lever Clockwise SPDT Other EX-R0 Side Rotary Clockwise SPDT No lever furnished EX-R0 Side Rotary Counter Clockwise SPDT EX-R0 Side Rotary Clockwise SPDT EX-R0 Roller Lever Counter Clockwise SPDT EX-R800 Roller Lever Clockwise SPDT Class / Group EX-R80 Roller Lever Counter Clockwise SPDT Class / Group EXHT-R Roller Lever Clockwise SPDT C High temperature 04 C [400 F] EX-R Roller Lever Clockwise SPDT EX-R6 Roller Lever Clockwise SPDT No mounting bracket EX-R8 Roller Lever Clockwise SPDT Nylon roller EX-R4 Roller Lever Clockwise SPDT No mounting bracket EX-Q Top Pin Plunger SPDT EX-Q6 Top Pin Plunger SPDT No mounting bracket EX-Q Top Pin Plunger SPDT Low operating force EXHT-Q Top Pin Plunger SPDT C High temperature 04 C [400 F] *Electrical Ratings C UL/CS Rating: 5, 5 Vac, 50 Vac or 480 Vac; /8 HP, 5 Vac; /4 HP, 50 Vac; / amp, 5 Vdc; /4 amp, 50 Vdc UL/CS Rating: 0, 5 Vac, 50 Vac or 480 Vac; 0, 5 Vac L ; HP, 5 Vac; HP, 50 Vac; / amp, 5 Vdc; /4 amp, 50 Vdc UL/CS Rating:, 5 Vac or 50 Vac; /0 HP, 5 Vac; /6 HP 50 Vac dditional options and configurations of this product are available. Please contact Honeywell for more information. Ø 8,8 [Ø 0.] 47, [.859],46 [0.5] 65,0 [.56] 9,96 [.66] 7,78 [0.70] sensing.honeywell.com

13 MICRO SWITCH Hazardous rea Switches CX Series 45 [5.7] 40 [.57] 9,4 [0.7] Ø 7,5 [Ø 0.9] straight knurl [5.4],7 [0.5] 8, [0.7] X 80 [.5] X 0,6 [4.0] Ø 97 [Ø.8] 60,5 [.8] 50,8 [] X M5 x,5 (six full threads min.) 8X Ø7,9 x 7,8 hole for 5/6-8 UNC internal formed thread 0, [0.80] 4X Ø 8,5 [Ø 0.] thru 5,4 [.0] 0,8 [4.09] 9,49 [.6] 9,4 [0.7] 96 [.78],7 [0.5] Ø 9,5 [Ø 0.75] shaft Ø 98 [Ø.86] 60,5 [.8] X /4-4 NPT (five full threads min.) 8X Ø7,9 x 7,8 hole for 5/6-8 UNC internal formed thread 0, [0.80] 5,4 [.0] Switch Type CX Series Hazardous rea Limit Switch CX Housing Style & ctuator Type Circuitry Switch Type Switches dditional Options Short housing, side rotary 5, SPDT basic switch/es CX Momentary 0 4 m to 0 m Standard housing, side rotary 0, SPDT basic switch/es CX Maintained One switch Side mounting, 5/6-8(8) Short housing, plunger actuator 4 0, DPDT basic switch/es Two switches Thru mounting, /8-4(4) 4 Standard housing, plunger actuator 6, SPDT, hermetically sealed basic switch/es Three switches C Low temperature 6 Short housing, black epoxy 8 4 m to 0 m output for position sensing 4 Four switches E TEX/IEC Ex/ INMETRO certified with cover clamp 7 Stand. housing, bronze material, 5/6-8 UNC- mtg holes 7, SPDT, goldplated contacts, basic switch/es 5 Two switches, one CW oper., one CCW oper. M Metric, M5 x.5 conduit 8 Standard housing, bronze material D0 9 Switch assemblies (replacement) 00 Non-threaded thru holes Flat shaft Or other numbers, various specials Other special configurations may be available. For more information, contact your Honeywell representative.

14 MICRO SWITCH Hazardous rea Switches GX/GXE Series 4,0 [.65] GXE 40,0 [.57] 4,8 [0.97],0 [0.87] 0,0 [0.79],5 [0.49] Ø9,9 [Ø0.9] steel plunger,0 [0.] 60,0 [.6],8 [0.54] 8 [.0] X conduit plug (supplied unfitted) 4,0 [0.6] 5,0 [.05],5 [0.0] 0,0 [.8] 57,0 [.4] 65,0 [.56] 55,9 [.0] GX 70,0 [.75] 8, [.50] 0,9 [4.05] 75,0 [,95] 60,0 [.6] 0,0 [.8] 4,0 [.65] GXE Switch Type GX Series Hazardous rea Limit Switch GXE Series Hazardous rea Limit Switch 4 5 # Cable Length Circuitry ctuator Type Side Lever Roller Material Head Orientation 5 meter cable Silver contacts, snap action Side rotary Plastic Gold contacts, snap action Pin plunger Steel C D Lever to front or plunger parallel to mtg surface Lever to right Roller plunger 4 Lever to left Roller arm 5 Lever to rear 6 Roller plunger perpendicular to mtg surface sensing.honey well.com

15 MICRO SWITCH Hazardous rea Switches 4CE00 Series 40 [.57] max. 6 [0.6] 5 [0.98] max. 7,6 [0.] holes: Ø5, [Ø0.0] C/bore: Ø0, [Ø0.40] x 6 [0.4] deep 44,0 [.7] Ø7,4 [Ø0.9 ] Switch Type 4CE Series Hazardous rea Limit Switch 0 ctuator Cable length 0 Top plunger meter 0 Top roller plunger meters 0 Cross roller plunger meters 8 ooted top plunger 4 4 meters 5 5 meters 6 6 meters 8 8 meters 0 0 meters meters 5 5 meters 5

16 Hazardous rea Switches VPX Series VPX Series Valve position indicator designed for outdoor use in hazardous atmospheres gency pprovals Explosion Proof Hazardous rea Designations Intrinsically Safe Hazardous rea Designations Sealing Housing Material Visual Indicator Operating Temp. Electrical Rating Certified for TEX, IEC Ex, CE, and culus specifications for global applications that requires protection from explosive gases, vapors & combustible dust coming soon: NEPSI and KOSH certifications Die-cast aluminum housing and various sealing (NEM 4, 4X, 6, and ), certifies the VPX Series is rated for rain, wind, snow, ice and blowing dust environments Wide operating temperature range from -40 C to 80 C Versions of the VPX with proximity switches carry an Intrinsically Safe (IS) rating Well suited for up to 500,000 actuation cycles vailable in multiple indicator colors that is visible from all directions VPX culus, TEX, IEC EX, CE North merica: Division, Class I, Groups, C, and D (Gas Rating) Division, Class II, Groups E, F, and G (Dust Rating) TEX/IEC Ex: II G, II D (TEX Rating) Ex db IIC T6 Gb (Gas Rating) Ex tb IIIC T85 C Db (Dust Rating) Ta -40 C to +50 C (Switch Code 4 or 4) Ta -40 C to +60 C (Switch Code or ) VPX with proximity switches carry an intrinsically safe rating: North merica: Not vailable TEX/IEC Ex: II G, II D (TEX Rating) Ex ia IIC T4 Ga (Gas Rating) Ex ia IIIC T5 C Da (Dust Rating) Ta -40 C to 80 C NEM 4, 4X, 6, and per UL 50E; IP66 per IEC ; IP67 per IEC 6059 (self-certified by Honeywell) aluminum with protective paint finish available in multiple colors and angles. Visible from all directions. versions with four electromechanical switches: -40 C to 50 C [-40 F to F] versions with two electromechanical switches: -40 C to 60 C [-40 F to 40 F] versions with proximity switches: -40 C to 80 C [-40 F to 76 F] versions with snap-action switches: UL Rating: 5 50 Vac CE Rating: 6 50 Vac 0 50 Vac Vdc Vdc versions with intrinsically safe proximity switches: switch element function: NMUR, NC nominal voltage: 8. V current consumption (On) m current consumption (Off) m PPLICTIONS Seaside grain and duel loading docks Oil and gas wells Refineries Fuel storage facilities Mining Petrochemical and chemical plants Waste water treatment facilities Oil and gas production pipeline networks Paint batching/blending plants Pharmaceuticals and drug processing plants Food and beverage industries Pesticides manufacturing plants Textile dyeing and finishing plants Lead acid battery manufacturing facilities 6 sensing.honeywell.com

17 VPX C GR Series Enclosure Material Origin and Certifications Switch Options Indicator ngle Indicator Color Shaft End Shaft Rotation Conduit Entry VPX Series Valve Position Indicator luminum China (standard) IEC Ex, TEX, CE, NEPSI snap action X SPDT 45 GR Green (open) Red (closed) Namur C China (premium) IEC Ex, TEX, culus, CE, SIL, NEPSI, KOSH 4 SPDT 4X snap action 90 Y lack (open) Yellow (closed) /4 in flats ±90 X snap action SPDT, gold contacts Y Yellow (open) lack (closed) Ø7.5 knurl for ex. lever 4 4X snap action SPDT, gold contacts RY Red (open) Yellow (closed) D ( & D) GY Yellow (closed) Green (open) RG Red (open) Green (closed) 4C YR Yellow (open) Red (closed) 4D YG Yellow (open) Green (closed) 4F E US (premium) IEC Ex, TEX, culus, CE, SIL, NEPSI, KOSH X I.S. inductive C proximity switch (Namur) Ø 05,8 [Ø 4.6] 60 continuous Number of Specials Conduit Plugs Leave blank for no plugs () /-4 NPT ( & D) () /4-4 NPT ( & D) plug C () M0 x.5 ( & D) plugs () M5 x.5 plugs Up to two letters or numbers to indicate a special feature. Indicate how many plugs should be included. ny unused conduit entries (4) M0 x.5 must be sealed with a blanking element certified to the (4) M5 x.5 hazardous location environment (or better). Plugs can () /-4 NPT also be purchased ( & D) & () separately. /4-4 NPT ( & D) (see page 7). () /4-4 NPT (,, & D) 75 [.0] min. to remove cover CLOSED 95,8 [.77] 9,0 [.4] 5,0 [.05] 4,5 [0.8] 65,0 [.56] Conduit Position X,5 [.8] Conduit Position C Conduit Position Conduit Position D 57,5 [.5] 5,6 [.9] 4 X M6 x 8 4 X M8 x ,0 [5.5] 57,5 [.5] 5,6 [.9] 40,0 [5.5] 7

18 Hazardous rea Switches V5W Series V5W Series asic switches approved for use in Zone hazardous locations pproved for use in Zone hazardous locations IP67 equivalent UL, cul, ENEC, CQC, IEC Ex approvals 5 electrical rating Longer service life: over one million mechanical operations Quick-connect terminals SPDT, SPNO, SPNC 00 gf, 00 gf operating forces vailable with a variety of actuators Global package size acceptance Gold contacts are also available for controlling logic-level/ low-energy circuits These options have a three-month lead time for set up. PPLICTIONS ppliances (especially with new refrigerants) Valve actuators Commercial refrigeration Ice makers HVC/R (furnace, refrigeration, ventilation) gency pprovals Explosion Proof Hazardous rea Designations Sealing Housing Material Sealing Material Operating Temp. Electrical Rating Mechanical Life V5W UL, cul, ENEC, CQC, IEC Ex IEC Ex per IEC and Ex nc II T5 Gc -5 C < Tamb < +85 C IP67 equivalent PT thermoplastic polyester silicone -5 C to 85 C [- F to 85 F] UL/cUL electrical rating per UL 6058-: 5, /0 5 Vac/50 Vac, 0,000 cycles ENEC/CQC electrical rating per IEC and G509.: 5, 5 Vac/50 Vac, 50,000 cycles,000,000 cycles 80 cycles/minute max. 8 sensing.honeywell.com

19 V5W E Z 00 0 W Switch Type MICRO SWITCH Hazardous Location-Rated V5W asic Switch E Terminals Circuitry Quick connect 4,8 mm x 0,5 mm Z SPDT P SPNO Not all combinations of model code are available. Please contact your Honeywell provider/representative for assistance. These options have a three-month lead time for set up. C 00 Operating Force g max. 00 g max. SPNC Lever Location No lever Lever pivot far from plunger Lever pivot near plunger Lever Type Pin plunger Short straight lever Standard straight lever Long straight lever 05 Roller lever 06 Simulated roller lever Long roller lever K Mounting Holes Metric (Ø, mm) US (Ø,9 mm) Contact Material Standard silver alloy Gold-plated silver alloy Electrical Rating (must be included) 5, /0 HP W 5 Vac/50 Vac Special Designator special designator code is used to indicate some non-standard feature such as a special actuator, wire color, wire length, connector, etc. Review product specification to determine the nature of the non-standard feature. This code will consist of up to three alphanumeric characters. blank designates no difference from standard listing. X,9 [0.] X,5 [0.098] X 4,7 [0.9] X R, [0.05] Ø, [Ø0.],5 [0.098],8 [0.] X R 0,6 [0.0] 0,50 ±0,0 [0.0 ±0.00] OP 5,9 [0.6] 0, [0.4] 5, [0.0] 5, [0.0] Ø, [Ø0.] Ø, [Ø0.5], [0.87] [.] 7,8 [0.] 9

20 There s an advantage for taking the bold step. For seeing the possibilities. nd seizing the opportunity. t Honeywell, we work hard to lead the way. To develop technologies that are ahead of the curve. To deliver solutions that anticipate your needs. nd sometimes that innovative mindset allows you to be the market leader. That s why MICRO SWiTCH switches are the leading electromechanical switch brand on the market. nd you can rest assured, Honeywell switches are the right product at the right time to help you maximize efficiency and minimize cost. ecause it s a Honeywell product, backed by world-class service and support. Part Innovation. Part Engineering. Total Solutions. MICRO SWITCH Hazardous rea Switches X/X LSX CX EX VPX GXE GX 4CE00 V5W Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defective. The foregoing is buyer s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While Honeywell may provide application assistance personally, through our literature and the Honeywell web site, it is customer s sole responsibility to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this writing. However, Honeywell assumes no responsibility for its use. Potential pplications Control valves Conveyors and grain elevators Maintenance equipment Material handling Off-shore drilling Paint booths Petrochemical and waste treatment plants Pipeline valves Find out more To learn more about Honeywell s sensing and switch products, call , inquiries to info.sc@honeywell.com, or visit sensing.honeywell.com Honeywell Sensing and Internet of Things 9680 Old ailes Road Fort Mill, SC 9707 honeywell.com EN 5 /8 08 Honeywell International Inc. ll rights reserved.