Datasheet. Engine type 3/6/8DX(S)(C) Tech Library

Size: px
Start display at page:

Download "Datasheet. Engine type 3/6/8DX(S)(C) Tech Library"

Transcription

1 atasheet ngine type 3/6/8X(S)()

2 atasheet diesel engines type X, XS and X Operational circumstances based on ISO-conditions (ISO 3046-I). reserves the right to alter the technical data without prior notice. efinition X: Natural aspiration XS: Turbocharged X: Turbocharged & Intercooled asic data ycle ylinders ore Stroke Swept volume ompression ratio Injection rake mean effective pressure Piston speed 4 stroke, single acting in line 242 mm 320 mm 6 cylinders: 88,3 liters 8 cylinders: 117,8 liters X: 12,45 : 1 XS/X: 12,06 : 1 irect, mechanical One pump per cylinder 11,99 bar (X at 750 rpm) 8,0 m/s (at 750 rpm) mission omply with all environmental requirements, such as IMO TIR-2 and NR-2. Power ngine power (ISO 3046 I) Nominal power of gensets X(S)() ngine type rpm kw P 50 z electric - 3 phase 60 z electric - 3 phase P W (kw) P n (kv) P W (kw) P n (kv) 3 X XS X X XS X X X X onversion factors used: 1 metric P = 0,736 kw enerator efficiency: = 0,95 Power factor: cos = 0,8

3 3/6/8X(S)() engine 840 (Shallow) (eep) ry mass* (kg) 3X (S)() X (S)() X () * lywheel, vibration damper and coolers are included 3/6/8X(S)() genset ry mass* (kg) 3X (S)() X (S)() X () * enset total mass depending on generator type and size bout classification nglo elgian orporation is ISO9001:2008 certified. ll engines are individually tested on test benches with option of the presence of the client and possibility of all major classifications. ISO 9001 : 2008 URU VRITS ertification

4 - and sales support worldwide ent russels frica merica sia urope Oceania To find out more detailed information about our service and sales support, please visit our website ontact details nglo elgian orporation Wiedauwkaai ent ( elgium ) T +32 (0) (0) info abcdiesel.be ll data provided in this document is non-binding. This data serves informational purposes only and is especially not guaranteed in any way. epending on the subsequent specific individual projects, the relevant data may be subject to changes and will be assessed and determined individually for each project. This will depend on the particular characteristics of each individual project, especially specific site and operational conditions. TST 3/6/8X(S)() - N - 10 / 2012

5 atasheet ngine type 12/16Z

6 atasheet diesel engines type (V)Z Operational circumstances based on ISO-conditions (ISO 3046-I). reserves the right to alter the technical data without prior notice. efinition (V)Z: Medium speed engine, turbocharged & intercooled, available in nti-clock and lock rotation. an run on diesel, heavy fuel, vegetable oil, animal greases,... ual fuel execution is also possible. asic data ycle ylinders ore Stroke Swept volume 4 stroke, single acting in V 256 mm 310 mm 12 cylinders: 191,5 liters 16 cylinders: 255,2 liters ompression ratio 12,1 : 1 Injection rake mean effective pressure Piston speed irect, mechanical One pump per cylinder 18,8 bar (at 1000 rpm) 10,3 m/s (at 1000 rpm) mission omply with all environmental requirements, such as IMO TIR-2, NR-2 and U3. Power ngine type rpm kw ngine power (ISO 3046 I) P Nominal power of gensets (V)Z 50 z electric - 3 phase 60 z electric - 3 phase P W (kw) P n (kv) P W (kw) P n (kv) 12 Z Z Z Z * Z Z Z * Z Z Z Z * Z Z Z * * or special applications onversion factors used: 1 metric P = 0,736 kw enerator efficiency: = 0,95 Power factor: cos = 0,8

7 I * 1301* J 12/16Z engine * I ( ) J ry mass** (kg) 12Z Z * Turbochargers at free end side ** lywheel, vibration damper and coolers are included * (depending on generator type and size) 12/16Z genset (depending on generator type and size) * ( ) ry mass** (kg) 12Z Z * Turbochargers at free end side ** enset total mass depending on generator type and size bout classification nglo elgian orporation is ISO9001:2008 certified. ll engines are individually tested on test benches with option of the presence of the client and possibility of all major classifications. ISO 9001 : 2008 URU VRITS ertification

8 - and sales support worldwide ent russels frica merica sia urope Oceania To find out more detailed information about our service and sales support, please visit our website ontact details nglo elgian orporation Wiedauwkaai ent ( elgium ) T +32 (0) (0) info abcdiesel.be ll data provided in this document is non-binding. This data serves informational purposes only and is especially not guaranteed in any way. epending on the subsequent specific individual projects, the relevant data may be subject to changes and will be assessed and determined individually for each project. This will depend on the particular characteristics of each individual project, especially specific site and operational conditions. TST 12/16Z - N - 03 / 2013

9 atasheet ngine type 6/8Z

10 atasheet diesel engines type Z Operational circumstances based on ISO-conditions (ISO 3046-I). reserves the right to alter the technical data without prior notice. efinition Z: Medium speed engine, turbocharged & intercooled, available in nti-clock and lock rotation. an run on diesel, heavy fuel, vegetable oil, animal greases,... ual fuel execution is also possible. asic data ycle 4 stroke, single acting ylinders 6-8 in line ore 256 mm Stroke 310 mm Swept volume 6 cylinders: 95,7 liters 8 cylinders: 127,6 liters ompression ratio 12,1 : 1 Injection irect, mechanical One pump per cylinder rake mean effective pressure 18,8 bar (at 1000 rpm) Piston speed 10,3 m/s (at 1000 rpm) mission omply with all environmental requirements, such as IMO TIR-2, NR-2 and U3. Power ngine type rpm kw ngine power (ISO 3046 I) P Nominal power of gensets Z 50 z electric - 3 phase 60 z electric - 3 phase P W (kw) P n (kv) P W (kw) P n (kv) 6 Z Z Z Z * Z Z Z * Z Z Z Z * Z Z Z * * or special applications onversion factors used: 1 metric P = 0,736 kw enerator efficiency: = 0,95 Power factor: cos = 0,8

11 * * I * 6/8Z engine 870 * * (Shallow) (eep) * I ry mass** (kg) 6Z / / Z / / * Turbocharger at free end side ** lywheel, vibration damper and coolers are included * (depending on generator type and size) 6/8Z genset * (depending on generator type and size) * * ry mass** (kg) 6Z Z * Turbocharger at free end side ** enset total mass depending on generator type and size bout classification nglo elgian orporation is ISO9001:2008 certified. ll engines are individually tested on test benches with option of the presence of the client and possibility of all major classifications. ISO 9001 : 2008 URU VRITS ertification

12 - and sales support worldwide ent russels frica merica sia urope Oceania To find out more detailed information about our service and sales support, please visit our website ontact details nglo elgian orporation Wiedauwkaai ent ( elgium ) T +32 (0) (0) info abcdiesel.be ll data provided in this document is non-binding. This data serves informational purposes only and is especially not guaranteed in any way. epending on the subsequent specific individual projects, the relevant data may be subject to changes and will be assessed and determined individually for each project. This will depend on the particular characteristics of each individual project, especially specific site and operational conditions. TST 6/8Z - N - 03 / 2013

13 atasheet ngine type 6/8L36

14 atasheet diesel engines type L36 Operational circumstances based on ISO-conditions (ISO 3046-I). reserves the right to alter the technical data without prior notice. efinition L36: Medium speed engine, turbocharged & intercooled, available in nti-clock and lock rotation. an run on diesel, heavy fuel and bio-fuels. ual fuel execution is also possible. asic data ycle ylinders ore Stroke Swept volume 4 stroke, single acting 6-8 in line 365 mm 420 mm 6 cylinders: 263,4 liters 8 cylinders: 351,2 liters ompression ratio 15,5 : 1 Injection rake mean effective pressure Piston speed harging system ommon Rail (lternatively: direct, mechanical, one pump per cylinder) 23,9 bar (at 750 rpm) 10,5 m/s (at 750 rpm) 2 stage charging mission esigned to comply with IMO TIR-3. Power ngine power (ISO 3046 I) Nominal power of gensets L36 ngine type rpm kw P 50 z electric - 3 phase 60 z electric - 3 phase P W (kw) P n (kv) P W (kw) P n (kv) 6 L L L L L L onversion factors used: 1 metric P = 0,736 kw enerator efficiency: = 0,96 Power factor: cos = 0,8

15 I J 6/8L36 engine I J ry mass* (kg) 6L L * lywheel, vibration damper and coolers are included (depending on generator type and size) 6/8L36 genset ry mass* (kg) 6L L * enset total mass depending on generator type and size bout classification nglo elgian orporation is ISO9001:2008 certified. ll engines are individually tested on test benches with option of the presence of the client and possibility of all major classifications. ISO 9001 : 2008 URU VRITS ertification

16 - and sales support worldwide ent russels frica merica sia urope Oceania To find out more detailed information about our service and sales support, please visit our website ontact details nglo elgian orporation Wiedauwkaai ent ( elgium ) T +32 (0) (0) info abcdiesel.be ll data provided in this document is non-binding. This data serves informational purposes only and is especially not guaranteed in any way. epending on the subsequent specific individual projects, the relevant data may be subject to changes and will be assessed and determined individually for each project. This will depend on the particular characteristics of each individual project, especially specific site and operational conditions. TST 6/8L36 - N - 10 / 2012

17 atasheet ngine type ual uel Z / (V)Z

18 atasheet dual fuel engines type Z and (V)Z Operational circumstances based on ISO-conditions (ISO 3046-I). reserves the right to alter the technical data without prior notice. efinition Z: Medium speed Z engine (V)Z: Medium speed (V)Z engine»» Turbocharged & intercooled»» vailable in nti-clock and lock rotation»» uilt for dual fuel execution asic data ngine type 6 Z 8 Z 12 Z 16 Z Swept volume (liters) 95,7 127,6 191,5 255,2 Number of ylinders ore Stroke ompression ratio 12,1:1 12,1:1 12,1:1 12,1:1 rake mean effective pressure (bar) 12,5 12,5 12,5 12,5 Power ngine power (ISO I) Nominal power of gensets Z and (V)Z ngine type rpm kw 50 z electric - 3 phase 60 z electric - 3 phase P W (kw) P n (kv) P W (kw) P n (kv) 6 Z 8 Z 12 Z 16 Z onversion factors used: enerator efficiency: = 0,95 Power factor: cos = 0,8 Natural gas with Methane Index = 73 Lower alorific Value gas = kj/nm³ Lower alorific Value diesel = kj/kg Possible gases: natural gas, waste gas, landfill gas (the ability to burn other gases should be done in consultation with )

19 * * * * I * I * 6/8Z engine * Turbocharger at free end side ** lywheel, vibration damper and coolers are included * * (Shallow) (eep) * I ry mass** (kg) 6Z / / Z / / * (depending on generator type and size) * 6/8Z genset * * * Turbocharger at free end side ** enset total mass depending on generator type and size (depending on generator type and size) * * ry mass** (kg) 6Z Z I I * * 1301* 1301* 12/16Z engine * Turbochargers at free end side ** lywheel, vibration damper and coolers are included * I ( ) J ry mass** (kg) 12Z Z * (depending on generator type and size) * 12/16Z genset * Turbochargers at free end side ** enset total mass depending on generator type and size (depending on generator type and size) * ( ) ry mass** (kg) 12Z Z

20 - and sales support worldwide ent russels frica merica sia urope Oceania To find out more detailed information about our service and sales support, please visit our website ontact details nglo elgian orporation Wiedauwkaai ent ( elgium ) T +32 (0) (0) info abcdiesel.be ISO 9001 : 2008 URU VRITS ertification ll data provided in this document is non-binding. This data serves informational purposes only and is especially not guaranteed in any way. epending on the subsequent specific individual projects, the relevant data may be subject to changes and will be assessed and determined individually for each project. This will depend on the particular characteristics of each individual project, especially specific site and operational conditions. TST Z / (V)Z - N - 03 / 2013

The company is constantly evolving, developing new solutions in the field of marine propulsion, power generation and railway traction.

The company is constantly evolving, developing new solutions in the field of marine propulsion, power generation and railway traction. Traction engines An important step in ABC s history was the acquisition by OGEPAR (1985), a strong financial holding with a large base in metal industry and engineering. Today, ABC has risen far above

More information

Commercial High Speed Diesel Engines

Commercial High Speed Diesel Engines MRIN PROUT HNOOK oercial High Speed iesel ngines 78 mhp [57.4 ] to 1822 mhp [134 ] Harmony with the nvironment IMO mission Limits Reliability, conomical efficiency & omfort for customers dedicated to maritime

More information

Generating sets. and turn-key solutions

Generating sets. and turn-key solutions Generating sets and turn-key solutions An important step in ABC s history was the acquisition by OGEPAR (1985), a strong financial holding with a large base in metal industry and engineering. Today, ABC

More information

Marine Engine. IMO Tier ll and Tier lll Programme 2nd edition 2016

Marine Engine. IMO Tier ll and Tier lll Programme 2nd edition 2016 Marine Engine IMO Tier ll and Tier lll Programme 2nd edition 2016 All data provided in this document is non-binding. This data serves informational purposes only and is especially not guaranteed in any

More information

MAN 18V48/60TS. Two-stage turbocharged diesel engine

MAN 18V48/60TS. Two-stage turbocharged diesel engine MAN 18V48/60TS Two-stage turbocharged diesel engine MAN Diesel & Turbo Powering the world responsibly MAN Diesel & Turbo is the world s leading provider of large-bore diesel engines and turbomachinery.

More information

Diesel engine D 2866 LE20x Technical Data

Diesel engine D 2866 LE20x Technical Data page 1 Engine type: Cylinders : Aspiration : Cooling : Lubrication: Injection: Generator: Starter motor: four-stroke, direct-injection 6 cylinder in line, wet replaceable cylinder liners turbocharger,

More information

L 16 / 24. Marine Diesel Engine. Main Specification. Engine Type rpm 1,000 1,200

L 16 / 24. Marine Diesel Engine. Main Specification. Engine Type rpm 1,000 1,200 L 16 / 4 L 16 / 4 rpm 1,000 1,00 Bore mm 160 Stroke mm 40 Stroke/Bore ratio 1.5 : 1 cm 01 Swept volume per Cyl. liter 4.8 Compression ratio 15. : 1 Mean effective pressure bar.4 0.7 Max. combustion pressure

More information

4,5 MW el. Efficiency on a new level. TCG 2032 TCG 2032B V16. 44,6 % electrical. 43,2 % thermal.

4,5 MW el. Efficiency on a new level. TCG 2032 TCG 2032B V16. 44,6 % electrical. 43,2 % thermal. 4,5 MW el www.mwm.net TCG 2032 Efficiency on a new level. For natural gas and biogas with an output from 3,300 to 4,500 kw el TCG 2032B V16 43,2 % thermal 44,6 % electrical Our experience for your success.

More information

MAN 51/60DF. Dual-fuel flexibility and reliability

MAN 51/60DF. Dual-fuel flexibility and reliability MAN 51/60DF Dual-fuel flexibility and reliability MAN Diesel & Turbo Powering the world responsibly MAN Diesel & Turbo is the world s leading provider of large-bore diesel engines and turbomachinery.

More information

MAN B&W ME-GI. Dual fuel low speed engine

MAN B&W ME-GI. Dual fuel low speed engine Dual fuel low speed engine The ME-GI Engine Supreme fuel flexibility The technology used in the design of the new two-stroke ME-GI engine combines MAN Diesel & Turbo s ME-C design with the GI-design from

More information

L58/64, L48/60, V48/ L40/54, L32/40, V32/ L28/32A, V28/32A, L27/ L23/30A, V23/30A, 48 L32/40DG, V32/40DG 49-50

L58/64, L48/60, V48/ L40/54, L32/40, V32/ L28/32A, V28/32A, L27/ L23/30A, V23/30A, 48 L32/40DG, V32/40DG 49-50 Contents Two-stroke Propulsion Engines 4-35 K98MC, K98MC-C, 11-12 S90MC-C, L90MC-C, K90MC, K90MC-C, 13-16 S80MC-C, S80MC, L80MC, K80MC-C, 17-20 S70MC-C, S70MC, L70MC 21-23 S60MC-C, S60MC, L60MC, 24-26

More information

CAT CG170. Series Gas Generator Sets

CAT CG170. Series Gas Generator Sets CAT CG170 Series Gas Generator Sets CAT CG170 SMARTER ENERGY SOLUTIONS COMMERCIAL AND INDUSTRIAL FACILITIES Facilities such as manufacturing plants, resorts, shopping centers, office or residential buildings,

More information

an EnPro Industries company Medium Speed, Four Stroke Diesel Engines

an EnPro Industries company Medium Speed, Four Stroke Diesel Engines an EnPro Industries company Medium Speed, Four Stroke Diesel Engines Beloit, Wisconsin, USA Fairbanks Morse manufacturing facilities, totaling some 70 acres, are located in Beloit, WI. 2 Fairbanks Morse

More information

North. Asia. America. Africa. South. America. Australia. Double Block and Bleed Dual Expanding Plug Valve

North. Asia. America. Africa. South. America. Australia. Double Block and Bleed Dual Expanding Plug Valve North merica Netherlands Europe sia frica South merica ustralia ouble lock and leed ual Expanding Plug Valve CERTIFICTES E X E CUT IO NS V Standard Execution 35 33 7 13 11 6 21 56 12 30 2 7 32 17 23 5

More information

NEW: CG132B TAKE ADVANTAGE OF DIGITAL ASSISTANCE

NEW: CG132B TAKE ADVANTAGE OF DIGITAL ASSISTANCE NEW: CG132B TAKE ADVANTAGE OF DIGITAL ASSISTANCE 2018 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, Caterpillar Yellow, the Power Edge trade dress as well as

More information

C7 ACERT Industrial Engine Tier 3/Stage IIIA 224 bkw/ rpm

C7 ACERT Industrial Engine Tier 3/Stage IIIA 224 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1 Rotation

More information

51/60G. Four-stroke gas engine

51/60G. Four-stroke gas engine 51/60G Four-stroke gas engine MAN Diesel & Turbo is the world s leading designer and manufacturer of low and medium speed engines. Our involvement with electrical power generators goes back to 1904 when

More information

CAT CG170 K. Series Gas Generator Sets

CAT CG170 K. Series Gas Generator Sets CAT CG170 K Series Gas Generator Sets CAT CG170 K SMARTER ENERGY SOLUTIONS COMMERCIAL AND INDUSTRIAL FACILITIES Facilities such as manufacturing plants, resorts, shopping centers, office or residential

More information

C7 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm

C7 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1 Rotation

More information

C7 ACERT Industrial Power Unit Tier 3/Stage IIIA 168 bkw/ rpm

C7 ACERT Industrial Power Unit Tier 3/Stage IIIA 168 bkw/ rpm CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1

More information

Super CB Series Clutch/Brakes

Super CB Series Clutch/Brakes Super Series lutch/rakes Long Life, High Performance esign The Super Series lutch/rakes function in the same manner as the standard Series. The major advantage of the Super Series is extraordinary long

More information

P. R2...P. Two. have. become. Range of Pressure-Independent Control Valves. one

P. R2...P. Two. have. become. Range of Pressure-Independent Control Valves. one P. R2...P Two have become Range of Pressure-Independent Control alves one The pressure-independent control valve R2 P sets new standards The challenge Energy savings with maximum convenience and low installation

More information

GM Standard - GM 90.25

GM Standard - GM 90.25 GM Standard - GM 90.25 utomotive Standards - GM 90.25 GM 90.25.00-XX-XX Page /4 GM 90.25.01-XX Page /5 GM 90.25.02-XX Page /6 GM 90.25.03-XX Page /7 GM 90.25.04-XX Page /8 GM 90.25.05-XX-XX Page /9 GM

More information

Engine Selection Guide Two-stroke MC/MC-C Engines

Engine Selection Guide Two-stroke MC/MC-C Engines Two-stroke MC/MC-C Engines This book describes the general technical features of the MC Programme This is intended as a 'tool' for assistance in the initial stages of a project. As differences may appear

More information

BI-FUEL SYSTEM TECHNOLOGY

BI-FUEL SYSTEM TECHNOLOGY BI-UEL SYSTEMS TEHNOLOY HIPOWER SYSTEMS has partnered with Altronic, LL to incorporate the TI Bi-uel System into a HIPOWER generators ranging from 15 kw to 3MW. 3 1 2 The HIPOWER Bi-uel Systems will be

More information

C32 ACERT Industrial Engine Tier bkw/ rpm

C32 ACERT Industrial Engine Tier bkw/ rpm CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

C32 ACERT Industrial Engine Tier bkw/ rpm

C32 ACERT Industrial Engine Tier bkw/ rpm CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

C32 ACERT Industrial Engine Tier bkw/ rpm

C32 ACERT Industrial Engine Tier bkw/ rpm CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

C15 ACERT Industrial Engine Tier 3/Stage IIIA 328 bkw/ rpm

C15 ACERT Industrial Engine Tier 3/Stage IIIA 328 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...171.4 mm (6.75 in) Displacement... 15.2 L (927.56 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...18.0:1

More information

Marine Engine. IMO Tier ll and Tier lll Programme 2018

Marine Engine. IMO Tier ll and Tier lll Programme 2018 Marine Engine IMO Tier ll and Tier lll Programme 2018 All data provided in this document is non-binding. This data serves informational purposes only and is especially not guaranteed in any way. Depending

More information

1,200/1,500/1,800 rpm siemens.com

1,200/1,500/1,800 rpm siemens.com SGE-S series gas engines and gen-sets biogas 1,200/1,500/1,800 rpm siemens.com SGE-18SL & SGE-24SL Engine Parameters SGE-18SL SGE-24SL Speed rpm 1,200 1,500 1,800 1,200 1,500 1,800 Engine power bhp kwb

More information

C9 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm

C9 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...112.0 mm (4.41 in) Stroke...149.0 mm (5.87 in) Displacement... 8.8 L (537.01 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.1:1

More information

C11 ACERT Industrial Engine Tier 3/Stage IIIA 242 bkw/ rpm

C11 ACERT Industrial Engine Tier 3/Stage IIIA 242 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...130.0 mm (5.12 in) Stroke...140.0 mm (5.51 in) Displacement... 11.1 L (677.36 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...17.2:1

More information

C13 ACERT Industrial Engine Tier 3/Stage IIIA 310 bkw/ rpm

C13 ACERT Industrial Engine Tier 3/Stage IIIA 310 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...130.0 mm (5.12 in) Stroke...157.0 mm (6.18 in) Displacement... 12.5 L (762.8 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...17.3:1

More information

Matic TM. Data sheet Sheet No.: Rev. A EL-O-MATIC ACTUATORS WITH ASCO SOLENOID VALVES Date: November /2 NC 5/2

Matic TM. Data sheet Sheet No.: Rev. A EL-O-MATIC ACTUATORS WITH ASCO SOLENOID VALVES Date: November /2 NC 5/2 ata sheet Sheet No.:.06. Rev. -O-MTI TUTORS WITH SO SOLNOI VLVS ate: November 009 Selector plate for / - / function lectrical entry Pg 9 8 ir entry G/" Speed control (optional) 7 Speed control (optional)

More information

4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic

4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2 & 3/4 Ports. Technical & Service Data. Pneumatic atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation

More information

C18 ACERT Industrial Engine Tier bkw/ rpm

C18 ACERT Industrial Engine Tier bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1

More information

DEUTZ Engine Documentation Genset Manual. BF4M2012C (D2OC74,9) - 50 Hz 1/5 DEUTZ AG

DEUTZ Engine Documentation Genset Manual. BF4M2012C (D2OC74,9) - 50 Hz 1/5 DEUTZ AG 1/5 DEUTZ AG Technical data General engine data Engine Type BF4M2012C EKZ 11372 Speed 1500 min -1 Net frequency Exhaust emission standard 50 Hz Stage II Specific engine data Aspiration No of cylinders

More information

C15 ACERT Industrial Power Unit Tier 3/Stage IIIA 354 bkw/ rpm

C15 ACERT Industrial Power Unit Tier 3/Stage IIIA 354 bkw/ rpm CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...171.4 mm (6.75 in) Displacement... 15.2 L (927.56 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

See Note. 100% of rated load. Mechanical efficiency ISO3046/1 2,4,7 35.2% 34.8% 34.1% Electrical efficiency ISO3046/1 2,4,6,7 33.7% 33.4% 32.

See Note. 100% of rated load. Mechanical efficiency ISO3046/1 2,4,7 35.2% 34.8% 34.1% Electrical efficiency ISO3046/1 2,4,6,7 33.7% 33.4% 32. Generator set data sheet 1000 kw (1250 kva) Standby Model: C1000 N6 Frequency: 60 Hz Fuel type: Natural gas MI 50 + Emissions NOx: 1.0 g/hp-hr LT water inlet temp: 50 C (122 F) HT water outlet temp: 90

More information

See Note. 100% of rated load

See Note. 100% of rated load Generator set data sheet 1250 kw (1563 kva) Standby Model: C1250 N6 Frequency: 60 Hz Fuel type: Natural gas MI 69 + Emissions NOx: 1.0 g/hp-hr LT water inlet temp: 50 C (122 F) HT water outlet temp: 90

More information

C18 ACERT Industrial Power Unit Tier bkw/ rpm

C18 ACERT Industrial Power Unit Tier bkw/ rpm CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

Brass ball valves 60 series

Brass ball valves 60 series Brass ball valves 60 series /8 to 3 Rp /4 to Rp Ideally suited for most industrial applications Easy installation, simple operation and maintenance free Full bore passage giving minimum flow resistance

More information

C9 ACERT Industrial Power Unit Tier 3/Stage IIIA 261 bkw/ rpm

C9 ACERT Industrial Power Unit Tier 3/Stage IIIA 261 bkw/ rpm CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...112.0 mm (4.41 in) Stroke...149.0 mm (5.87 in) Displacement... 8.8 L (537.01 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

C18 ACERT Industrial Engine Tier 3/Stage IIIA 429 bkw/ rpm

C18 ACERT Industrial Engine Tier 3/Stage IIIA 429 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1

More information

See Note. 100% of rated load

See Note. 100% of rated load Generator set data sheet 1160 kw Continuous Model: Frequency: C1160 N5C 50 Hz Fuel type: Natural gas MI 78 + Emissions NOx: 500 mg/nm 3 LT water inlet temp: HT water outlet temp: 50 C (122 F) 95 C (203

More information

See Note. 100% of rated load

See Note. 100% of rated load Generator set data sheet 1400 kw Continuous Model: C1400 N6C Frequency: 60 Hz Fuel type: Natural gas MI 75 + Emissions NOx: 1.0 g/hp-hr LT water inlet temp: 50 C (122 F) HT water outlet temp: 90 C (194

More information

C18 ACERT Industrial Engine Tier 3/Stage IIIA 470 bkw/ rpm

C18 ACERT Industrial Engine Tier 3/Stage IIIA 470 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1

More information

Industrial CATERPILLAR ENGINE SPECIFICATIONS FEATURES. 612 bkw / 820 bhp rpm

Industrial CATERPILLAR ENGINE SPECIFICATIONS FEATURES. 612 bkw / 820 bhp rpm 3508 612 bkw / 820 bhp Industrial 1300 rpm CATERPILLAR ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore... 170.0 mm (6.69 in) Stroke... 190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 )

More information

MARINE. High speed engines for pleasure boats. MAN Engines

MARINE. High speed engines for pleasure boats. MAN Engines MARINE High speed engines for pleasure boats MAN Engines Pure pleasure Performance gives power its beauty: With powers ranging from 73 to 1,9 hp, MAN yacht engines are Europe s number one. MAN engines

More information

See Note. 100% of rated load

See Note. 100% of rated load Generator set data sheet 2000 kw Continuous Model: C2000 N6C Frequency: 60 Hz Fuel type: Natural gas MI 76 + Emissions NOx: 0.5 g/hp-h LT water inlet temp: 50 C (122 F) HT water outlet temp: 92 C (198

More information

1013. The engine for construction equipment.

1013. The engine for construction equipment. 1013. The engine for construction equipment.... 63-190 kw at 1500-2300 min -1 Engines with integrated cooling system These are the characteristics of the 1013: Modern water-cooled 4- and 6-cylinder in-line

More information

GTEC Transfer switch Open transition

GTEC Transfer switch Open transition GTE Transfer switch Open transition 40-2000 amp Description GTE transfer switches combine reliability and flexibility in a small, economical package for transferring loads between a utility and a generator

More information

See Note. 100% of rated load

See Note. 100% of rated load Generator set data sheet 2000 kw Continuous Model: Frequency: Fuel type: Emissions NOx: LT water inlet temp: HT water outlet temp: C2000 N6C 60 Hz Low BTU 0.5 g/hp-h 50 C (122 F) 92 C (198 F) Measured

More information

SET - 1 II B. Tech II Semester Regular/Supplementary Examinations, April/May-2017 THERMAL ENGINEERING-I (Mechanical Engineering) Time: 3 hours Max. Marks: 70 Note: 1. Question Paper consists of two parts

More information

Technical Data Injection Moulding Machines Series CX PET Light

Technical Data Injection Moulding Machines Series CX PET Light 130 CX PET Light Technical Data Injection Moulding Machines Series CX PET Light CX KM 130-750 CX (PET) 4-fold Injection Moulding machine metric units KM130CX Clamp unit Clamping force kn 1300 Mould opening

More information

Commercial. Marine. Marine. High speed propulsion engines. MAN Engines

Commercial. Marine. Marine. High speed propulsion engines. MAN Engines Marine Commercial Marine High speed propulsion engines MAN Engines Contents MAN Marine Engines Customer Benefits...4 Light, medium and heavy duty operation...4 MAN Service: Competent and motivated...5

More information

Adams. Progressive. Description. Typical system layout using Pneumatic Pump for grease - with monitoring. Typical system

Adams. Progressive. Description. Typical system layout using Pneumatic Pump for grease - with monitoring. Typical system 45 P rogressive systems can be used for oil or grease lubrication when it is required to provide a positive displacement with visual or electrical monitoring. ll outlets can be checked by one indicator

More information

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D4.2L 230 (4.2 MS 230 and 4.2 MI 230 Model) IMPORTANT: To comply with regulations

More information

DITCH WITCH JT2020, JT1220 DIRECTIONAL DRILLS

DITCH WITCH JT2020, JT1220 DIRECTIONAL DRILLS DITCH WITCH JT2020, JT1220 DIRECTIONAL DRILLS THAT OLD ORANGE MAGIC. DITCH WITCH. DITCH WITCH JT2020, JT1220 MACH 1 DIRECTIONAL DRILLS The JT2020 and JT1220 Mach 1 directional drills are the muscle machines

More information

1012. The engine for construction equipment kw at min -1

1012. The engine for construction equipment kw at min -1 1012. The engine for construction equipment. 41-123 kw at 1500-2500 min -1... Engines with integrated cooling system These are the characteristics of the 1012: Modern water-cooled 4- and 6-cylinder in-line

More information

Copyright by WÄRTSILÄ FINLAND Oy

Copyright by WÄRTSILÄ FINLAND Oy Copyright by WÄRTSILÄ FINLAND Oy All rights reserved. No part of this booklet may be reproduced or copied in any form or by any means (electronic, mechanical, graphic, photocopying, recording, taping or

More information

Filled System Thermometers

Filled System Thermometers illed System Thermometers Model N & NR Mechanical Thermometers ata sheet : ST/2012 The Rototherm range of filled system thermometers offer tough yet accurate instruments with rigid stems for direct mounting

More information

TAG2A TAG3A. Series kwm 1500/1800 rpm kwm 1500/1800 rpm ElectropaK. Ratings. Basic technical data

TAG2A TAG3A. Series kwm 1500/1800 rpm kwm 1500/1800 rpm ElectropaK. Ratings. Basic technical data 4006-23TAG2A 527-746 kwm (Gross) @ 1500/10 rpm 4006-23TAG3A 566-839 kwm (Gross) @ 1500/10 rpm ElectropaK 4000 Series Basic technical data Number of cylinders....................................................6

More information

2192 mm (86.3 in.) or mm (116.6 in.) mm (116.6 in.)

2192 mm (86.3 in.) or mm (116.6 in.) mm (116.6 in.) SPIITIONS ngine 640L / 648L 748L Manufacturer / Model John eere PowerTech PSS 6.8L John eerepowertech 6.8L John eere PowerTech PSS 6.8L John eere PowerTech 6.8L Off-Road mission Standards P inal Tier 4

More information

. Four turn signal Switches

. Four turn signal Switches ucket Selection uide m 3 (yd 3 ) ucket apacity 7.0 (9.2) 6.5 (8.5) 6.0 (7.8) 5.5 (7.2) 5.0 (6.5) 4.5 (5.9) 4.0 (5.2) 1200 1400 1600 1800 2000 2200 kg/m 3 2000 2500 3000 3500 4000 Material ensity Standard

More information

KAWASAKI Environment-friendly New engine technology

KAWASAKI Environment-friendly New engine technology Norway-Japan Maritime Green Innovation Seminar 4th June, 2015 KAWASAKI Environment-friendly New engine technology 0 Yosuke NONAKA Diesel Engine Dep t. Machinery Div. Kawasaki Heavy Industries, Ltd. F4C-04-0035

More information

3516 Industrial Engine

3516 Industrial Engine CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 69.06 L (4,214.3 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1

More information

3512 Industrial Engine

3512 Industrial Engine CAT ENGINE SPECIFICATIONS V-12, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 51.8 L (3,161.03 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1

More information

1100 Series M250C Marine Propulsion Engine 186 kw ( rpm

1100 Series M250C Marine Propulsion Engine 186 kw ( rpm These are the latest addition to the common platform concept of 1106 Series diesel engines. Assembled on a new high technology production line, these ultra clean engines will provide a superior replacement

More information

Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const.

Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const. NXT NRATON lectronically nhanced Solenoid Valves rass and odies 1/" - 2" NPT 2/2 3/2 /2 eatures ncrease in pressure ratings to A levels on all products (up to a 500% improvement) Lower power operation

More information

RRI PERFORMANCE ASSESSMENT OF AFTERMARKET PERFORMANCE MODIFICATION 1 (12)

RRI PERFORMANCE ASSESSMENT OF AFTERMARKET PERFORMANCE MODIFICATION 1 (12) - Road Vehicles - Steady State Test Mode - - Powertrain Performance Comparison Test Code - Performance Assessment of Aftermarket Performance Modification - 1 (12) Status of Document Type Description Publication

More information

3508 Industrial Engine

3508 Industrial Engine FEATURES Image shown may not reflect actual engine CAT ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 ) Aspiration...Turbocharged

More information

: see performance curve rev. A : suction 900 mm / discharge 700 mm

: see performance curve rev. A : suction 900 mm / discharge 700 mm PUMPUNIT HK700 PUMP General The HK pump is a single-stage mixed-flow centrifugal pump for lifting large quantities of water to medium heads. The pump is suitable for heavily contaminated and unpurified

More information

VALVE TIMING DIAGRAM FOR SI ENGINE VALVE TIMING DIAGRAM FOR CI ENGINE

VALVE TIMING DIAGRAM FOR SI ENGINE VALVE TIMING DIAGRAM FOR CI ENGINE VALVE TIMING DIAGRAM FOR SI ENGINE VALVE TIMING DIAGRAM FOR CI ENGINE Page 1 of 13 EFFECT OF VALVE TIMING DIAGRAM ON VOLUMETRIC EFFICIENCY: Qu. 1:Why Inlet valve is closed after the Bottom Dead Centre

More information

MARINE. High speed engines for pleasure boats. MAN Engines

MARINE. High speed engines for pleasure boats. MAN Engines MARINE High speed engines for pleasure boats MAN Engines Pure pleasure Performance gives power its beauty: With powers ranging from 73 to 1,9 hp, MAN yacht engines are Europe s number one. MAN engines

More information

@Perkins. Technical Data Series TAG1A TAG2A TAG3A. Diesel Engine - Electropak. Basic technical data

@Perkins. Technical Data Series TAG1A TAG2A TAG3A. Diesel Engine - Electropak. Basic technical data Technical Data Basic technical data Number of cylinders.................................................... 6 Cylinder arrangement................................... Vertical, In line Cycle....................................4

More information

ME-GI Engine Fuelled by LNG

ME-GI Engine Fuelled by LNG ME-GI Engine Fuelled by LNG Andrzej Krupa Managing Director MAN Diesel & Turbo Poland Sp. z o.o. < 1 > Disclaimer All data provided on the following slides is for information purposes only, explicitly

More information

Bronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)

Bronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0) SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents ronze Gate Valves ontents Page Figure Number Index

More information

3516B Generator Set Electric Power

3516B Generator Set Electric Power Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness. Image shown may not reflect

More information

,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents

,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product

More information

Technical Specification

Technical Specification Technical Specification including performance data Project 3 x 9CM25 rev 2. consisting of 3 Caterpillar Diesel Generator sets Type 9CM25 with site output of: 2475 bkw at each engine flywheel rated 750

More information

MITSUBISHI DIESEL ENGINE IFM NO. JN (1/6) TECHNICAL INFORMATION DATE Aug. 8, 2002

MITSUBISHI DIESEL ENGINE IFM NO. JN (1/6) TECHNICAL INFORMATION DATE Aug. 8, 2002 DIESEL ENGINE IFM NO. JN02411-011(1/6) TECHNICAL INFORMATION DATE Aug. 8, 2002 TITLE Specification Sheets of S6U-MPTK Engine (IMO Certified Engine) Specification Sheets of S6U-MPTK Engine that is satisfied

More information

DIESEL GENERATOR SET MTU 20V4000 DS3250

DIESEL GENERATOR SET MTU 20V4000 DS3250 DIESEL GENERATOR SET MTU 20V4000 DS3250 Standby Power: 3250 KWel 13.8kV/60 Hz/Water Charge Air Cooling/Fuel Consumption Optimized Optional equipment and finishing shown. Standard may vary. Product Highlights

More information

316 Stainless Steel Gas Springs & Dampers

316 Stainless Steel Gas Springs & Dampers 316 Stainless Steel Gas Springs & ampers djustable Gas Springs Fixed Force Gas Springs djustable ampers xtension, ompression and ual-rate ampers Mounting Hardware Locking Springs Tension Springs arbon

More information

SOLENOID VALVES pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1

SOLENOID VALVES pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1 SONOI VVS pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1 TURS Rugged forged brass bodied solenoid valves (mono- or bistable function) designed to provide maximum flow Solenoid

More information

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D7.3L DI LD / D7.3L D-Tronic (Mercury MerCruiser D7.3L LD D-Tronic and D7.3L

More information

Horizontal Cartridge DUST COLLECTOR OPF

Horizontal Cartridge DUST COLLECTOR OPF * The level of sound pressure is affected by the background noise, the reverberation of the environment, the presence of other sonorsources and the positioning of the machine near reflecting surfaces.

More information

Natural gas engine E 0836 LE 202 Technical data

Natural gas engine E 0836 LE 202 Technical data Page 1 Principle: No of cylinders : Supercharging: Mixture cooling: Engine cooling : Lubrication : Spark plugs: Starter motor: 4-stroke Otto gas engine 6 in line Exhaust turbocharger with water-cooled

More information

TCR Turbocharger. The cutting edge

TCR Turbocharger. The cutting edge TCR Turbocharger The cutting edge TCR The cutting edge MAN Diesel & Turbo is the world s leading designer and manufacturer of large exhaust gas turbochargers for low and medium speed diesel and gas engines.

More information

MAN B&W Marine Engines MAN Holeby GenSets. IMO Tier ll 2012

MAN B&W Marine Engines MAN Holeby GenSets. IMO Tier ll 2012 MAN B&W Marine Engines MAN Holeby GenSets IMO Tier ll 2012 All data provided in this document is non-binding. This data serves informational purposes only and is especially not guaranteed in any way. Depending

More information

9. FUEL SYSTEM 14. FORMS 15. APPENDIX

9. FUEL SYSTEM 14. FORMS 15. APPENDIX ONTNTS PG PG 1. ISL MRIN NGINS 1 9. UL SYSTM 53 MINI- MINI-29 MINI-33 MINI- MINI- MINI-62 MINI-7 SM- SN-11 SZ-5 SZ-25 SZ-2 OPTIONL KITS NGIN MINTNN KIT 2. LTRIL SYSTM - GNRTOR STS 2 3 5 6 7 9 1 11 ISL

More information

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D4.2L IDI (Mercury MerCruiser D4.2L Model) IMPORTANT: To comply with regulations

More information

Top marks for ecology and economy.

Top marks for ecology and economy. www.mwm.net TCG 2020 Top marks for ecology and economy. For natural gas and biogas with an output from 1,000 to 2,000 kw el Our experience for your success. The TCG 2020. Top performance from MWM used

More information

Principles of Engine Operation. Information

Principles of Engine Operation. Information Internal Combustion Engines MAK 4070E Principles of Engine Operation Prof.Dr. Cem Soruşbay Istanbul Technical University Information Prof.Dr. Cem Soruşbay İ.T.Ü. Makina Fakültesi Motorlar ve Taşıtlar Laboratuvarı

More information

Piston Accumulators Series Catalog HY /US Page

Piston Accumulators Series Catalog HY /US Page Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End

More information

PVL Series. Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves. Section C. C59

PVL Series. Solenoid & Remote Pilot Operated 1/8 & 1/4 Valves. Section C.   C59 Series Solenoid & Remote Pilot Operated /8" & /4" Valves Section Moduflex www.parker.com/pneu/pvl asic Valve unctions...60 Stacking pplications...6-62 eatures ( & )...63 ommon Part Numbers-Stacking ( &

More information

INTERNATIONAL MARITIME ORGANIZATION (IMO) Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

INTERNATIONAL MARITIME ORGANIZATION (IMO) Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance INTERNATIONAL MARITIME ORGANIZATION (IMO) Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES Base Engine MR706L Cummins MerCruiser

More information

See Note. 100% of rated load 2,4,6, (17.73)

See Note. 100% of rated load 2,4,6, (17.73) Generator set data sheet 2000 kw Continuous Model: Frequency: C2000 N5CB 50 Hz Fuel type: Natural gas MI 70 + Emissions NOx: 350 mg/nm 3 LT water inlet temp: HT water outlet temp: 40 C (104 F) 92 C (198

More information

Wärtsilä Auxpac PRODUCT GUIDE

Wärtsilä Auxpac PRODUCT GUIDE Wärtsilä Auxpac PRODUCT GUIDE Copyright by WÄRTSILÄ FINLAND OY All rights reserved. No part of this booklet may be reproduced or copied in any form or by any means (electronic, mechanical, graphic, photocopying,

More information