PRO-LIGHT MINI INTRODUCTION APPLICATION PRODUCT SPECIFICATION

Transcription

1

2 INTRODUCTION The Pro-Light MINI range has been developed to offer a comprehensive selection of high quality LED spot lights for a variety of applications including displays, reception areas and decorative areas. This unique family of products include Fixed, Gimbal, Wallwash and Scoop luminaires that are available in both circular and square formats. The bodies are manufactured from high quality die cast aluminium and come complete with either specular or semi-specular reflectors in a choice of three beam angles. The reflectors simply twist lock into place enabling you to swap them out for a different type post install should you wish to alter the lighting to suit layout changes. All models are offered in an array of lumen outputs ranging from 1206llm up to 3304llm luminaire lumens and are available in CRI80 with a choice of 3000K or 4000K colour temperatures. With such a wide selection of options available this superb family of products is fast becoming the display fitting of choice nationwide, offering versatility without compromise. APPLICATION Canteen Commercial/Offices Corridor Education Healthcare/Social Housing Hotel/Leisure Industrial/Manufacturing Retail T: E: sales@dextralighting.co.uk Page 1 of 16

3 Stairwell SPECIFICATION Construction Die cast aluminium housing. High performance aluminium faceted reflectors. Extruded aluminium heat sink. Performance Available in 1206llm, 1652llm, 2478llm & 3304llm luminaire lumen LED variants. All sources available in either 3000K or 4000K colour temperatures. Available with Specular or Semi-Specular reflectors in 20, 40 and 60 beam angles. CRI 80+ L2 compliant* ECA compliant* *specific variants only Control SD(E) Switch Dimming. DSI(X) Digital Addressable Lighting Interface. DSI Digital Dimming. Installation Can be supplied with prewired leads of your choice to minimise installation times. Suitable for plasterboard, mineral fibre and metal tile installation. Simple retractive spring clips provide a 0.5mm 22mm ceiling thickness compatibility. Optional polo rings for retro-fit applications where existing cut outs need to be utilised. Variations Round or square frames. White, black or silver/grey bezels. 3000K and 4000K colour temperatures. Specular & semi-specular reflectors. 20, 40 or 60 beam angles. IMAGES T: E: sales@dextralighting.co.uk Page 2 of 16

4 Product Images T: E: Page 3 of 16

5 T: E: Page 4 of 16

6 T: E: Page 5 of 16

7 T: E: Page 6 of 16

8 T: E: Page 7 of 16

9 Project Images T: E: Page 8 of 16

10 T: E: Page 9 of 16

11 TECHNICAL ROUNDFIXED ROUNDSCOOP ROUNDWW ROUNDGIMBAL T: E: Page 10 of 16

12 SQUAREFIXED SQUARESCOOP SQUAREWW SQUAREGIMBAL WARRANTY All Dextra products are supplied with a 12 month warranty for any defect that may occur with the product during this time. Any defect will either be repaired on site free of charge or the defective product may be replaced on a chargeable basis and credit given against defective product returned. The course of action taken will be at our discretion and dependent on the nature of the defect. T: E: sales@dextralighting.co.uk Page 11 of 16

13 The control gear within our high frequency and LED luminaires is further underwritten by our suppliers for a period of up to 5 years in total from the time of purchase. This comprises labour and parts for the first 3 years and free of charge components only for the final 2 years. PROTEC LED FR 8W GU10 luminaires and all Emergency LED ranges such as LED 3, EXI, HBE, OAT, OEZ, AME, OEH and TWS * are exempt from the 5 year warranty and are supplied with 1 year warranty only. PROTEC LED COB luminaires are supplied with a two year warranty for replacement luminaires only. All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation or unsuitable environmental conditions. It is the duty of the customer to ensure that all relevant tests have been carried out prior to requesting site visits or replacement products, for example replacement of lamps, commissioning of sensors and inspection of external wiring. In the event that no defect is found with the product our costs for attending site will be recharged to the customer and credit will not be issued against returned products. No consequential losses incurred resulting from any defect with our product will be reimbursed. Consumable commodities such as lamps, starters and batteries are excluded from these warranty terms. Batteries are supplied with a twelve month warranty only. 5 year warranty on LED product ranges is subject to a maximum of 4000 operating hours per year and only applies where failures exceed the component manufacturers expected failure rate and lumen depreciation. If you require any assistance with regards to our products please do not hesitate to contact our Customer Services department on *The LED4 Emergency LED range is supplied with a three year battery warranty and 5 year luminaire warranty. ORDER CODES Luminaire s Description PL RF Round Fixed PL RG Round Gimbal PL RS Round Scoop PL RW Round Wallwash PL SF Square Fixed PL SG Square Gimbal PL SS Square Scoop PL SW Square Wallwash Optic Lumen Output Circuit Wattage L14 937llm 9.4w L llm 15.1w L llm 21.4w L llm 28.9w Luminaire lumen (llm) figures based on 40 degree specular reflector. Beam Angle T: E: sales@dextralighting.co.uk Page 12 of 16

14 20 20 degree Narrow degree Medium degree Wide Colour Temp C83 CRI Kelvin C84 CRI Kelvin Reflector SP Specular SS* Semi-Specular *Semi specular is not available in 20 degree angles Body Colour W White B Black Dimming Options Description S Switch Dimming A Digital Addressable Lighting Interface (DALI) D Digital Dimming (DSI) Lighting Controls Description RLI Dextra Reacta-Link Systems RLS Reacta-Link daylight and prsence detection sensor Please click here for full details on our wireless controls. Emergency Description STR Emergency Reacta-Link Miscellaneous Description C34998 & C3793 1M 6 Pole Blue / Black Lead and Besa Connection Plate C34997 & C3792 1M 4 Pole Lead and Besa Connection Plate C34996 & C3791 1M 3 Pole Lead and Besa Connection Plate

15 Pro-Light Mini WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN : specification for general requirements and tests. It should be installed by a suitably qualified person in accordance with IEE. CAUTION: there is a potential risk of electric shock from the LED boards when the product is operational with the cover removed. NOTE: INSTALLATION AND OPERATION OF THE LUMINAIRE BEYOND ITS SCOPE OF SUPPLY WILL INVALIDATE THE WARRANTY V / 50-60Hz IP20 IK Ambient temperature within ceiling void: Min: 5 C Max: +35 C All electrical connections to be made prior to installing fitting into aperture.ensure any gear and cables are located in a position where they will not hinder movement of the luminaire. 3 Ceiling Aperture (mm): 112 Ceiling Depth (mm): Min: 7 Max: 30 Use 3mm ply-wood patress mounting when mounting into soft tiles. 4 DO NOT cover heat sink Load spring clips and raise fitting into ceiling aperture DO NOT mount driver on top of heat sink 5 DIL630001_C 6 13/02/18

16 Pro-Light Mini 7 8 Push into ceiling aperture and allow spring clips to snap fitting into position Adjust fitting to perform as desired DIL630001_C 13/02/18

17 Generic Infill Ring Installation Guide V / 50-60Hz 1 WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN : specification for general requirements and tests. It should be installed by a suitably qualified person in accordance with IEE. CAUTION: there is a potential risk of electric shock from the LED boards when the product is operational with the cover removed. NOTE: INSTALLATION AND OPERATION OF THE LUMINAIRE BEYOND ITS SCOPE OF SUPPLY WILL INVALIDATE THE WARRANTY. 2 Attach the circular infill ring to the downlight. 3 Insert the oval infill ring through the aperture in the ceiling and let it rest on the ceiling. The oval infill ring should be narrow enough to fit through your ceiling aperture. 4 Install the downlight into the oval infill ring as if you were installing directly into the ceiling. Refer to the Product specific installation leaflet. 5 6 The downlight will need to be centralised in the ceiling aperture to ensure no gaps are visible. DIL /02/18