LED Highbay INTRODUCTION APPLICATION PRODUCT SPECIFICATION

Transcription

1

2 INTRODUCTION Utilising the latest in LED technology, the offers superb energy efficiency combined with lumen outputs that allow effective replacement of 400w metal halide luminaires. The also utilises lens control providing accurate distribution of light ensuring minimal wastage and energy consumption. The incorporates our new L3 LED card which we developed in conjunction with Philips providing a quality LED source with a 5 year warranty (terms and conditions apply, please see our warranty page for full details). With each LED card offering up to 13,300 lumens and a flexible luminaire design that is able to accommodate multiple LED cards, we are able to offer lumen packages as high as 26,600. The L3 card also offers unique functionality with features such as Constant Lumen Output allowing the driver to offset lumen depreciation over lifetime; as a result of which both beginning and end of life performance of the source are identical. The is also offered with a range of sensor controls to further enhance your energy saving giving both daylight regulation and presence detection and also offering ground level remote programming for ease of commissioning. Integral sensors allow these luminaires to be installed on a one for one basis with no need to install additional BUS wiring therefore minimising your installation costs. APPLICATION Food/Clean Area T: E: sales@dexeco.co.uk Page 1 of 5

3 Industrial/Manufacturing Warehouse/Storage SPECIFICATION Construction Robust, white powder coated steel body. Linear format for improved balance and ease of trunking installation. Anodised extruded aluminium heatsink. Performance Our bespoke L3 LED board allows us to offer lumen output up to 13,300 lumen per card. Adjustable luminaire configuration allows for multiple card layouts. Bespoke AluSink controls thermal performance to maximise LED lifetime and lumen maintenance. Three lens options offering a range of distributions for high level, low level, open area and racking applications. L2 compliant 60 Llm/w. ECA compliant. Control Integral R14 sensor operates at up to 18m providing both daylight regulation and presence detection. See sensors section for further information. Full dimming range from 1-100% (10-100% is recommended). Sensor can be programmed from ground level using REA-AP remote control. Emergency Optional integral emergency function operates one LED chip for three hours in the event of mains power failure. Installation Slide out brackets for rapid installation. Pre-wired plug connector for ease of wiring. Integral sensor variants utilise existing live, earth and neutral wiring with no requirement for additional BUS wiring. IMAGES Product Images T: E: sales@dexeco.co.uk Page 2 of 5

4 Project Images TECHNICAL T: E: Page 3 of 5

5 CP PDF CP PDF WARRANTY All Dextra products are supplied with a 12 month warranty for any defect that may occur with the product during this time. Any defect will either be repaired on site free of charge or the defective product may be replaced on a chargeable basis and credit given against defective product returned. The course of action taken will be at our discretion and dependent on the nature of the defect. The control gear within our high frequency and LED luminaires is further underwritten by our suppliers for a period of up to 5 years in total from the time of purchase. This comprises labour and parts for the first 3 years and free of charge components only for the final 2 years. PROTEC LED FR 8W GU10 variants and Emergency LED ranges are exempt from the 5 year warranty and are supplied with 1 year warranty only. PROTEC LED COB luminaires are supplied with a two year warranty for replacement luminaires only. All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation or unsuitable environmental conditions. It is the duty of the customer to ensure that all relevant tests have been carried out prior to requesting site visits or replacement products, for example replacement of lamps, commissioning of sensors and inspection of external wiring. In the event that no defect is found with the product our costs for attending site will be recharged to the customer and credit will not be issued against returned products. No consequential losses incurred resulting from any defect with our product will be reimbursed. Consumable commodities such as lamps, starters and batteries are excluded from these warranty terms. Batteries are supplied with a twelve month warranty only. 5 year warranty on LED product ranges is subject to a maximum of 4000 operating hours per year and only applies where failures exceed the component manufacturers expected failure rate and lumen depreciation. T: E: sales@dexeco.co.uk Page 4 of 5

6 If you require any assistance with regards to our products please do not hesitate to contact our Customer Services department on ORDER CODES Luminaire s Circuit Wattage Llm/w HBLD L102 C74 Highbay LED, Lumen, Single L3 Card, Colour w HBLD L133 C74 Highbay LED, Lumen, Single L3 Card,Colour w HBLD L205 C74 Highbay LED, Lumen, Twin L3 Card, Colour w HBLD L266 C74 Highbay LED, Lumen, Twin L3 Card, Colour w Optic OM Low Level Lens, 63 degree OH High level Lens, 50 degree RA Linear Lens Lighting Control R14DN Reacta 14, DSI, Narrow Lens R14DW Reacta 14, DSI, Wide Lens R14DU Reacta 14, DSI, Ultra Wide Lens R11HN Reacta 11, HFR, Narrow (for low temperature applications) R11HW Reacta 11, HFR, Wide (for low temperature applications) Emergency E3 3 Hour Integral Emergency ST3 Self Test AT3 Autotest Emergency T: E: sales@dexeco.co.uk Page 5 of 5