ASSEMBLY INSTRUCTION FOR RC MODEL PRINTED ON 3D PRINTER

Transcription

1

2 ASSEMBLY INSTRUCTION FOR RC MODEL PRINTED ON D PRINTER Visit our website and purchase a product which you are interested in. Then you get an access for the file download in g-code or STL format. Download the files onto SD card. We try to optimize the universal G-code output for the widest selection of printers and we test our products on several printer brands and configurations. In case you are owner of the Prusa D printer use for the print the files prusa G-code Print all of the model parts on the D Printer - minimum supported size of the printed surface is 0x0x5 cm - the supported type of filament is PLA Assemble the model according to the attached PDF manual - for bonding of the model parts we recommend to use Super Glue (medium thick) and Activator PRODUCT CONTAINS STL files of RC model PZL p.c in /0 scale Universal G-code of RC model PZL p.c in /0 scale optimized for D printers SimpliFyD factory files of RC model PZL p.c in /0 scale Asssembly instructions in PDF format Scale markings in PDF format MODEL SPECIFICATION Length Wingspan Weight of all printed parts Takeoff weight 78,5 cm / inch 0 cm / 4, inch 900 g 50 g / (s 00mAh Li-Po, 4x servo, SC)

3 WHATEVER YOU NEED PLA filament for print model parts FLEX filament for print tire Super glue and Activator Spring diameter 7 mm 0x screws diameter mm x screws diameter mm Bowden wire 6x hinge Electric motor (recommended 56 00kv) Regulator Li-Po Battery s 50mAh RC receaver Propeller x6 / x5 PRINTED PARTS LIST - No./ Weight 57/g 56/0g 45/5g 6/ 58/0g 44/ /g 4/ 46/g 5/ /g 4/9g 4/g 59/g 0/9g 9/5g 47/g 40/5g 7/9g 0/0g 9/5g 0/8g 64-65/ 8/ 48/g 7/g 75/g 69/g 0/9g 8/6g 68/g 76/g 7/g 7/g 04/g 0/g 70/g 9/g /6g 07/ /5g / 66-67/g 4/5g /5g 74/g 06/g 4/ 5/9g 75/g /0g 79/g 05/68g 08/65g 4/5g 8/g 5-55/g 5/5g 6/g 7/g 0/8g /5g 60/ 6-6/6g /g 49/7g 7/g 50/0g 77/g 78/5g 79/g

4 PRINTED PARTS LIST No Parts name Fuselage Fuselage Fuselage Fuselage Fuselage Fuselage Fuselage Body Battery cover Ring Engine Holder Cylinder Left Wing Left Wing Left Wing Left Wing Left Wing Right Wing Right Wing Right Wing Right Wing Right Wing Left Ailerons Left Ailerons Right Ailerons Right Ailerons Strut Holder Strut Holder Strut Holder Strut Holder RepairKit-Damper Wing Strut Wing Strut Wing Strut Wing Strut Wing Hex Colour Weight Infil Suport E. Multiplier Perimeter Main Location 0g Fuselage_0_-_07 8g Fuselage_0_-_07 9g Fuselage_0_-_07 g Fuselage_0_-_07 68g 9% Fuselage_0_-_07 g Fuselage_0_-_07 7% 6 Fuselage_0_-_07 65g yes Engine_08_-_ 5g 5 7 Engine_08_-_ Copper 8g % Engine_08_-_ 0g 9 Engine_08_-_ Silver g 6% 7 Engine_08_-_ 6g Wing -_6 5g Wing -_6 9g Wing -_6 g Wing -_6 g Wing -_6 6g Wing -_6 5g Wing -_6 9g Wing -_6 g Wing -_6 g Wing -_6 Wing -_6 Wing -_6 Wing -_6 Wing -_6 g 5% 5 Wing -_6 g 5% 5 Wing -_6 g 5% 5 Wing -_6 g 5% 5 Wing -_6 g 5 Wing -_6 5g 7 Wing -_6 5g 7 Wing -_6 5g 7 Wing -_6 5g 7 Wing -_6 g Wing -_6

5 PRINTED PARTS LIST No Parts name Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator Axe Hex Strut Landing gear Landing gear Landing gear Landing gear Damper Damper Damper Rudder Rudder Rudder Rudder Propeller Propeller Propeller Propeller Spur Spur Cooler Cooler Dashboard Glass Gunsight Gunsight Hasp Headrest Mach.Gun Mach.Gun Grip Insert Disc Tire Colour Weight Infil Suport E. Multiplier Perimeter Main Location 9g Elevator_7_-_48 Elevator_7_-_48 5g Elevator_7_-_48 5g Elevator_7_-_48 9g Elevator_7_-_48 Elevator_7_-_48 g 9% Elevator_7_-_48 Elevator_7_-_48 5g Elevator_7_-_48 g 9% Elevator_7_-_48 g Elevator_7_-_48 g 9% Elevator_7_-_48 7g Landing_gear_49_-_55 0g Landing_gear_49_-_55 7g Landing_gear_49_-_55 0g Landing_gear_49_-_55 g 5 Landing_gear_49_-_55 g 5 Landing_gear_49_-_55 g 5 Landing_gear_49_-_55 0g Rudder_56_-_59 g Rudder_56_-_59 0g Rudder_56_-_59 g Rudder_56_-_59 Propeller_60_-_6 6g Propeller_60_-_6 6g Propeller_60_-_6 6g Propeller_60_-_6 5% 8 5% 8 g 5% g 5% g 8 Transp. g g 8 g 8 g 8 Brown g g 5 g 5 g g 5% Wheel_77_-_79 5g 5% Wheel_77_-_79 Flex g Wheel_77_-_79 4

6 LANDING GEAR AND SUSPENSION The construction will start with the front lower part of the fuselage (5) to which the landing gear is attached. 5

7 LANDING GEAR AND SUSPENSION Glue the parts of the landing gear struts together (49-50) and then using M screw and M nut fix it to the the bottom part of the fuselage (5) Note: It is advisable to carefully fasten the nuts with glue so that the adhesive does t get into the thread, letting you to dismantle the assembly in the future. 6

8 LANDING GEAR STRUTS - SUSPENSION Landing Gear Suspension System: Insert the bowden cable (bent on the template) into the part (5) and secure it with a washer (54) and carefully glue it, then insert it into the opening at the bottom of the part (5). Then put on a spring of diameter 0mm and lenght 45mm from the inside. Now secure the assembly by gluing the part (55). Test if the suspension system is functional and then connect the bowden cable with the landing gear strut (49-50) this assembled unit will be glued to the fuselage part (6) later. 7

9 LANDING WHEELS Landing Wheels and their parts : Insert a 5 mm long screw M into the housing (77) with the screw head towards the wheel disc (78) and put (part 77+screw) into the disk (78) and glue it. Then mount the tyre (79) onto the wheel disc (78) and attach the complete wheel to the chassis and secure the wheel with a nut M which you fix by Super Glue. Note: the wheel must remain free to rotate. Congratulation! You just finished landing gear part of the fuselage and you have it ready for the connection with the fuselage and electric motor 8

10 FUSELAGE ASSEMBLY Assembly of the fuselage parts: by using the Super Glue cement together the fuselage parts (4---). It is recommended to pull through the bowden cables for an increased accuracy. Now attach the fuselage part (6) and glue it. Landing gear fuselage part: Now attach the the pre-assembled landing gear unit (5) with the rest of the fuselage and do t forget to attach the machine gun (74) and side cooller parts (66-67). Joining the wing and the fuselage: part number (7) serves as the centerpiece for connecting the wing to the fuselage and we will use it in the passage dedicated to the construction of the wing. Now we can attach the parts for the gunsight (70-7) 9

11 COCKPIT Cockpit: Complete the part of the fuselage number (4) where there is the cockpit with the details - the instrument panel (68), the headrest (7) and attach the handle (76). Then glue the windscreen (69) and check if the latch (7) fits into the opening and correctly to secure part (7) 0

12 FIN Fin: Glue parts (56-57) and then attach them to the fuselage part (), join the rudder parts (58-59) and insert the hinges that join these two parts which must remain movable. Attach the tail skid parts (64-65) to the rear fuselage part () Note: It is necessary to draw out the servo bowden wire and attach it to the rudder before you glue the parts of the rudder (59-58)

13 TAILPLANE Horizontal tailplane: into the fuselage part () cement the hexagonal pins (47), then glue tailplane parts (78) and (4-4), which you attach to hexagonal pins and glue the whole together with the struts (48-49) to the fuselage () Elevators: join port (left) elevator parts (9-40) then starboard (right) parts ( ), connect both parts together with the axle(46), make sure that the pieces are in plane, install the hinges in place and stick them into the taiplane that you already have attached to the rear fuselage part () Note: It is necessary to draw out the servo bowden wire and attach it to the elevator just before you join it with the horizontal tailplane.

14 ENGINE PART - ELECTRIC MOTOR ATTACHMENT Engine part: Fit the electric motor holder () into the fuselage part (5) so that the Print Beat logo is properly legible, then adjust correct setting of the motor holder by insertion or removing according to the size of your electric motor (then fix it by Super Glue). Engine model: Install 9x engine cylinder () to part (8), then insert the engine cooling ring (0) w it is the right moment to install the electronic parts (regulator and electric motor). Then fix the assembly by the screw to the fuselage part (5) and it remains to cover battery opening by the cover (9). Propeller spinner: Put the propeller onto the mounting disc and insert the spinner (60), then put a nut into the part (6) the propeller unit is complete. Note: You can make a choice of two used sizes of the mounting disc. Congratulation if you finished this part of the model assembly and you have the fuselage complete. Now you must still assemble the wing parts.

15 LEFT WING ASSEMBLY - SERVO Left Wing Assembly: start by connecting the middle part (7) with the first wing part (), then prepare the parts 4-5. Note: Before connecting the part (5) install the servo and run the servo cable through the prepared hole. 4

16 WING ASSEMBLY - AILERON Aileron: Glue together the parts with the installed servo (4-5-6) into which you put the inner part of the aileron () fitted with a 0.9mm-.mm axle made from a bowden wire or paper clips, then install the outer part of the aileron (4) with the axle from each side and connect both parts of the ailerons so that the axle fits into the wing openings. Warning: Apply the glue carefully so that the aileron remains movable. 5

17 WING ASSEMBLY - COMPLETION Left Wing Assembly Completion: Put on the part number (7) onto the aileron axle and glue part (7) with the wing part (6). The completed wing assembly cement to part number (), then to the assembled left wing attach the strut mounts (7-8). Then attach wing struts (5) for fixing the left wing to the fuselage. Note: Now the same procedure do with the right wing assembly 6

18 WING ASSEMBLY Right Wing Assembly: start by connecting the middle part (7) with the first wing part (8), then prepare the parts 9-0. Note: Before connecting the part (0) install the servo and run the servo cable through the prepared hole. Aileron: Glue together the parts with the installed servo (9-0-) into which you put the inner part of the aileron (5) fitted with a 0.9mm-.mm axle made from a bowden wire or paper clips, then install the outer part of the aileron (6) with the axle from each side and connect both parts of the ailerons so that the axle fits into the wing openings. Warning: Apply the glue carefully so that the aileron remains movable. Right Wing Assembly Completion: Put on the part number () onto the aileron axle and glue part () with the the wing part (). The completed wing assembly cement to part number (), then to the assembled wing attach the strut mounts (9-0). Then attach wing struts (5) for fixing the wing to the fuselage. 7

19 TEMPLATE FOR THE LANDING GEAR SUSPENSION - SCALE / TEMPLATE FOR THE GLASS FRAME- SCALE / 8