Eye Of SOLDERLESS INTERCONNECT TECHNOLOGY GUIDELINE. the Needle
|
|
- Amice Chapman
- 5 years ago
- Views:
Transcription
1 EON Pressfit Eye Of SOLDERLESS INTERCONNECT TECHNOLOGY the Needle GUIDELINE ME DOCPAGEAPAGE.indd 2 22/6/217 11:14:49
2 SOLDERLESS INTERCONNECT TECHNOLOGY EON Pressfit Eye Of the Needle As a connection, Pressfit technology offers a favorable alternative to soldering. A Pressfit is MATERIAL DESIGNATION Cu6P IACS : 16% PLATING Ni 1.5 µm under Post.8 to 1.8 µ mini Mat >> Pressfit definition.63 DIMEN- SIONS.63X1.2.63X X SHAPE CURRENT / ROWS 1A SINGLE 1A SINGLE 15A SINGLE PCB HOLE SIZE HOLE DIAME- TER PRIOR TO THE PLATING ± ± ±.25 a stamped terminal designed to be inserted into a plated-through 1. 1.X A DOUBLE ±.25 hole (PTH) in a printed circuit board (PCB), in such a way that an electro-mechanical connection is established without using solder. EON compliant Pressfit is qualified following the IEC tests, and also integrate higher requirements, such as higher MATERIAL QUALIFIED >> PCB definition COPPER UNDER LAYER ( µm) FR4 1.6 ±.15 > 35 PCB PLATING QUALIFIED CHEMICAL MIN-MAX ( µm) Ni 3-5 Au CHEMICAL.8-2 (Hot Air Levelling TIN) 1-4 temperature and higher cycles number. The four Axon Mechatronics Pressfit design has been patented. 216, AXON MECHATRONICS - RELEASED SEPTEMBER ALL RIGHTS RESERVED - PHOTOS : NICKELKROME
3 SOLDERLESS INTERCONNECT TECHNOLOGY >> Pressfit insertion rules In order to get best performance using Axon Mechatronics Pressfit, we recommend following instructions D1 minimum R PRESSFIT R D1 D2 FUNCTIONAL AREA NO PATTERN IN THIS DIRECTION D2 minimum.63 X X X X R : distance from the through hole center without any component top and bottom side D1, D2 : minimum distance between 2 Pressfit through hole center Note: for specific applications (like Pressfit mounted into connectors), the.9 ±.25 specified distance between PCB and Pressfit shoulder may be reviewed. PLEASE CONTACT US FOR FURTHER INFOR- MATION. >> Climatic & vibration test The electrical comportment is qualified by the variation of contact resistances, before and after tests. All the tests are carried out one after the other, each test changing the contact resistance (increase or decrease). This variation between each test shall not exceed +,5mΩ according to IEC MAX CONTACT VARIATION BEFORE/ AFTER TEST PRESSFIT PCB PLATING MAX INITIAL CONTACT RESISTANCE ( mω) VIBRATION 1 Hz to 5 Hz 15 mn each direction 12 cycles THERMAL SHOCK -4 C to 125 C > 3 H 3 cycles CLIMATIC SEQUENCE -4 C to 125 C 5 cycles of 24 hours DRY HEAT 125 C / 18 H CORROSION H2S: 1 ±2 1-9 VOL/VOL SO2: 5 ± VOL/VOL MAX FINAL CONTACT RESISTANCE ( mω) X X X X , AXON MECHATRONICS - RELEASED SEPTEMBER ALL RIGHTS RESERVED - PHOTOS : NICKELKROME
4 >> Pressfit insertion machine c SOLDERLESS INTERCONNECT TECHNOLOGY In some applications, the insertion of single pins replaces molded or overmolded connectors to reduce cost, weight and volume of the system. In this case, the connector housing is moved into the finished product cover. Axon Mechatronics offers a wide range of semi-automatic and automatic insertion machines for inserting Pressfit connections into the PCB. These standalone or inline machines can be integrated into electronic PCB manufacturing processes. To ensure optimum quality, our insertion machines integrate options to ensure good Pressfit insertion such as vision and force monitoring sensors. >> Cross section One of the most interesting points of the Pressfit EON (Eye Of the Needle) technology is the low distortion of the hole Press-in direction d Location of the microsection PCB Location of the microsection b b IEC 141/1 Measurement of the deformation a Original hole contour PRESSFIT a b c d IEC 6352 < 7 µm > 8 µm < 4 µm NO CRACK.63 X NO CRACK.63 X NO CRACK.8 X NO CRACK 1. X NO CRACK >> Applications Axon Mechatronics offers compliant pins for a wide range of applications in different industries. From inserted terminals onto PCB to stitched or overmoulded connectors, our solderless solutions will find their applications into your demanding product. Advantages of EON Compliant Pin Designs: Environmental compliance - lead-free plating No separate soldering process necessary Low thermal stress Suitable for multilayer and double-sided PCBs Reliable gas-tight connection, no corrosion Reliable performance in vibration and shock Connector can use standard plastic material for cost saving 216, AXON MECHATRONICS - RELEASED SEPTEMBER ALL RIGHTS RESERVED - PHOTOS : NICKELKROME
5 SOLDERLESS INTERCONNECT TECHNOLOGY >> Mechanical properties MAX PUSH-IN FORCE MIN PUSH-OUT FORCE TERMINAL REPLACEMENT PRESSFIT :.63 X 1.2 mm ,85,9,95 1 1,5 1,1 1, ,85,9,95 1 1,5 1,1 1,15 7, 6, 5, 4, 3, 2, 1,, PRESSFIT :.63 X 1.8 mm ,35 1,4 1,45 1,5 1,55 1,6 1, ,35 1,4 1,45 1,5 1,55 1,6 1,65 1, 8, 6, 4, 2,, PRESSFIT :.8 X 1.8 mm ,45 1,5 1,55 1,6 1,65 1,7 1, ,45 1,5 1,55 1,6 1,65 1,7 1,75 Hole diameter (mm 14, 12, 1, 8, 6, 4, 2,, PRESSFIT : 1. X 2. mm ,65 1,7 1,75 1,8 1,85 1,9 1, ,65 1,7 1,75 1,8 1,85 1,9 1,95 4, 35, 3, 25, 2, 15, 1, 5,, 216, AXON MECHATRONICS - RELEASED SEPTEMBER ALL RIGHTS RESERVED - PHOTOS : NICKELKROME
6 STAMPING MOULDING OVERMOULDING ASSEMBLING MECHATRONICS 216, AXON MECHATRONICS - RELEASED SEPTEMBER ALL RIGHTS RESERVED - PHOTOS : NICKELKROME MACHINES FOLLOW US Visit our website AXON MECHATRONICS S.A.S. DIVISION LOUPOT 13 avenue de Ty Bos CS QUIMPER CEDEX 9 - FRANCE TEL.: FAX: contact@axon-mech.com
STAMPING MOULDING OVERMOULDING ASSEMBLY MECHATRONIC MACHINES
STAMPING MOULDING OVERMOULDING ASSEMBLY MECHATRONIC MACHINES >>>>>>> interconnect integration Stamped Assembled Loose overmoulded Continuous overmoulded Axon Mechatronics >>>> Your technological partner
More informationAdapting Press-Fit Connection Technology for Electronic Modules in Harsh Environments.
Adapting Press-Fit Connection Technology for Electronic Modules in Harsh Environments. By Joseph Lynch Director of Advanced Product Engineering Interplex Industries Inc, USA. Andy Longford Consultant PandA
More informationAUTOMOTIVE INTERCONNECT. We re in the driving seat!
AUTOMOTIVE INTERCONNECT We re in the driving seat! w w w. a xo n - c a b l e. co m auto3&1 COUL.indd 2 11/10/2016 09:32:07 AUTOMOTIVE INTERCONNECT We re in the driving seat! OUR MAIN EXPERTISES Drawing
More informationSelection guide Standard preforming machines 2 Insertion machines & Process automation 3. Cutting machine for loose and radial components 4
Home SUMMARY Selection guide Standard preforming machines 2 Insertion machines & Process automation 3 Standard preforming machines PMC1 PMC2 C1,C4 CR MCK MK6 MK9 TRK Cutting machine for loose and radial
More informationD-Sub Connectors. Catalog E /09 Edition 3
www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com Table of Contents General..............................................................................................2
More information(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Token Electronics Industry Co., Ltd. Version: July 12, Web:
Version: July 12, 2018 (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd.,
More information(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Electronics Tech. Direct Electronics Industry Co., Ltd. Version: July 17, 2018
Version: July 17, 2018 Electronics Tech. (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F,
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More informationPower Terminals. 316 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I I
E L E C T R O N I C C O N N E C T O R S Power Terminals 316 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Contents Introduction 318 Overview 319
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
More informationEconoPACK 4 Product Family Mounting instructions / Application Note
EconoPACK 4 Product Family Mounting instructions / Application Note IFAG IPC MP - 2 - Edition 2013-02-01 Published by Infineon Technologies AG 59568 Warstein, Germany Infineon Technologies AG 2010. All
More informationSEMITOP2,3,4 Press-Fit
Mounting Instruction SEMITOP2,3,4 Press-Fit Revision: 03 Issue date: 2017-08-28 Prepared by: Roberto Agostini Approved by: Werner Obermaier Keyword: SEMITOP, mounting instructions, one screw mounting,
More informationWATTSYS Power distribution system
www.axon-cable.com WATTSYS Power distribution system WATTSYS Power distribution systems As vital components for electrical power distribution in telecommunication satellites and landbased weapon systems,
More informationTN1250 Technical note
Technical note Press-fit ACEPACK power modules mounting instructions Introduction ST introduces the ACEPACK Power Module family, designed for easy mounting and reliable performance in rugged applications.
More informationSPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF ROHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF-14871365 ROHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationNov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-13501505 RoHS ISSUED CHECKED CHECKED CHECKED APPROVED 12/14/09 kn 10/25/12 DS 11/15/12
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-10000064 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 1/31/11 DS
More informationREDCUBE The Impressive Press-Fit Technology and more
REDCUBE The Impressive Press-Fit Technology and more High amperage solution Superior mechanical retention these are. Terminals for Power! AGENDA Press-fit technology What is it? Advantages Installation
More informationSPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-22505105 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 7/6/07**
More information2.54mm Pitch Card Edge Connector
2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature
More informationPCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type)
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Double-sided two point Contact System Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard.
More informationMHz Filter
Applications Broadband tuners DOCSIS 3.0 gateways DOCSIS 3.0 cable modems SMP12D 3.00 x 3.00 x 1.22 mm Product Features Usable bandwidth 100 MHz High attenuation Balanced operation Small Size: 3.00 x 3.00
More informationAutomotive Relays PCB Single Relays. Micro Relay K (THT THR)
Micro Relay K (THT THR) Small power relay Limiting continuous current at 8 C Low weight Low noise operation Wave (THT) and reflow (THR/pin-in-paste) solderable versions Typical applications Door lock,
More informationSPECIFICATION FOR APPROVAL
FEB 25, 2004 CERAMIC DIPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION FOR APPROVAL ITEM: CERAMIC DIPLEX FILTER PART NUMBER: CFD-122715756 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS Inc FEB 25,
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 1206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating,
More informationProduct Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
More informationPower Integrity Guidelines Samtec MPT/MPS Series Connectors Measurement and Simulation Data
Power Integrity Guidelines Samtec MPT/MPS Series Connectors Measurement and Simulation Data Scott McMorrow, Director of Engineering Page 1 Modeled Section MPS Board MPT Board Power Via Power Via Power
More informationSPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SINGLE ROW DOUBLE ROW SLC
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF DOCUMENT CHECKED 9/28/11 DS 12/01/2011 TFG 12/01/2011 GL
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-32002005 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN DOCUMENT CHECKED
More information92-Position LGA/LGA PCBeam Connector for
92-Position LGA/LGA PCBeam Connector for Neoconix P/N: BBX0092CMMHFAU00 FEATURES High density 0.7424mm area-array pitch Low profile, 1.55 mm mated height PCBeam high reliability LGA spring contacts Bifurcated
More informationWelcome CIN::APSE. Technology
Welcome This guide has been designed to familiarize you with CIN::APSE - the unique, high-performance, solderless interconnect solution - and to guide you in using CIN::APSE in your applications. Table
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More informationEngineering Product Specification C310T-SC Series Ceramic tube, Time delay
Engineering Product Specification C310T-SC Series Ceramic tube, Time delay Printed on: 4/14/2015 Page 2 of 14 Technical Specification Approvals Functional Area Engineering Manager Product Manger Signature(s)
More information151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
More informationPRODUCT SPECIFICATION STANDARD TIMER CONNECTOR, RAST 5mm, 2-12 POSITIONS
PRODUCT SPECIFICATION STANDARD TIMER CONNECTOR, RAST 5mm, 212 POSITIONS 1. GENERAL: 1.2 Purpose and Scope: This specification describes the structure, properties, design types as well as quality requirements
More informationSimple, Fast High Reliability Rework of Leadless Devices Bob Wettermann
Simple, Fast High Reliability Rework of Leadless Devices Bob Wettermann Recently, the impact of leadless device reliability after rework was investigated as part of a NASA/DoD project for different leadless
More informationMounting instructions for 62Pak modules
Application Note 5SYA 2106-01 Mounting instructions for 62Pak modules This application note provides some basic guidelines on how to install the 62Pak modules into the application environment. Following
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503 Revision Made: ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
More informationAssembly/Packagng RF-PCB. Thick Film. Thin Film. Screening/Test. Design Manual
Thick ilm Thin ilm R-PCB Assembly/Packagng Screening/Test esign Manual RHe esign Manual The following rules are effective for the draft of circuit boards and hybrid assemblies. The instructions are only
More informationCONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF-10300024 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 6/04/04 ** 5/13/2010 SRJ 5/13/2010
More informationPressFIT mounting technology
AN2007-09 PressFIT mounting technology About this document Scope and purpose This application note provides a guideline how to use and implement Econo modules using PressFIT connectors. The values and
More informationZP2.5-PE Spring Terminal Block Ground
Technical Datasheet 1SNK162002D0201.indd 08/06/11 ZP2.5-PE Spring Terminal Block Ground Catalogue Page Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail
More informationBNC75 Receptacle Connector for Broadcast
BNC Receptacle Connector for Broadcast BNC Series for 12G-SDI Characteristic Impedance Ω Lock Type Bayonet OUTLINE BNC series for broadcasting equipment is a high performance Ω connector which is compliant
More informationProduct Specification
AFI Jack, Straight Orientation, Mixed Technology AFI Plug, Straight Orientation, Cable Terminated Other configurations available for: Vertical cable-to-board applications Floating Adaptor, Surface mount,
More informationCHARACTERISTIC SPECIFICATION
MICRO-D SERIES Microminiature connectors with solder bucket termination ESCC 3401/029 Features and Benefits Compliant with ESA specifications High performance Micropin contact system ( twist pin spring
More informationRoHS 2011/65/EU GREEN ELECTRONICS MSG. Terminal Blocks ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2011/65/EU e3 GREEN ELECTRONICS Terminal Blocks ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS TERMINAL BLOCKS Functional characteristics s 270
More informationMTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum
More informationCYG Wayon Circuit Protection CO., LTD.
CATALOG (2014) CYG Wayon Circuit Protection CO., LTD. CONTENTS Surface Mount Fuses 1206F Series. 2 0603F Series.5 1206S Series.8 0603S Series.11 Applications..14 Product Identification...14 Reliability
More information0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
More informationAC INLETS & OUTLETS IEC 320 & MINI IEC CONNECTORS IEC SERIES
C INLETS & OUTLETS IEC 30 & MINI IEC CONNECTORS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationMICRO-D SERIES. Microminiature connectors with solder bucket termination CS FR022. Features and Benefits. Typical Applications
MICRO-D SERIES Microminiature connectors with solder bucket termination CS FR022 Features and Benefits High performance Micropin contact system ( twist pin spring male contact and tubular socket contact)
More informationELECTRONICS DIVISION. METRAL 2mm HIGH-SPEED CONNECTORS 1000 SERIES, 2000 SERIES, 4000 SERIES
ELECTRONICS DIVISION METRAL 2mm HIGH-SPEED CONNECTORS 1000 SERIES, 2000 SERIES, 4000 SERIES FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries, FCI is a leading manufacturer of connects.
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MPP. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MPP Terminal Blocks Dimensional class: high RoHS 2011/65/EU Standard colour: green Height: 39 mm (15.35 in) 0 10 ½ 20 Max approved
More informationFlat Flexible Cables and Flat Cable Assemblies
www.axon-cable.comw.a Flat Flexible Cables and Flat Cable Assemblies 1 Contents General Information Introduction...2 Applications...4 Advantages...4 Production...5 Packaging...5 Storage conditions...5
More informationHow to Handle a Reed Switch
How to Handle a Reed Switch Reed Switch Application Notes APPLICATION NOTES: How to Handle a Reed Switch Reed switches consist of two or three metal reed contacts (blades) that are hermetically sealed
More informationabout us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
More informationabout us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
More informationResin Impregnated Paper Bushing, Oil to SF 6. , Type GSBK
1ZSC563-AAA en, Rev. 2 Resin Impregnated Paper Bushing, Oil to SF 6, Type GSBK Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
More informationZP2.5-4P Spring Terminal Block Feed-through
Technical Datasheet 1SNK162005D0201.indd 08/06/11 ZP2.5-4P Spring Terminal Block Feed-through Catalogue Page Thanks to the ZP2.5-4P, PI-Spring terminal block: Save time and connect directly rigid and flexible
More informationMSB Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation
More informationPlatinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751
Data Sheet 906125 Page 1/5 Platinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751 Design type PCS/PCF For temperatures from -50 to +150 C (-70 to +250 C) In accordance with DIN
More informationv1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Copyright 2013 JAE Electronics, Inc.
v1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Application Examples Laptops, Desktops, Ultrabooks Audio/ Video editing equipment Display devices Adapter/
More informationV.I.R.T.U.O. Ventilation boxes. Comfort ventilation boxes. Use. Range. Design
Comfort ventilation Very wide flow rate range: 0.11 to 9.72 m 3 /s Standard version with lacquered finish casing Use ventilation are designed for the ventilation of tertiary or industrial buildings, for
More informationEP A2 (19) (11) EP A2 (12) EUROPEAN PATENT APPLICATION. (43) Date of publication: Bulletin 2007/47
(19) (12) EUROPEAN PATENT APPLICATION (11) EP 1 88 077 A2 (43) Date of publication: 21.11.2007 Bulletin 2007/47 (1) Int Cl.: H01L 23/367 (2006.01) H01L 2/06 (2006.01) (21) Application number: 070731.2
More information3M CP2 Press-Fit Headers and Sockets, 2 mm
1 of 7 3M CP2 Press-Fit Headers and Sockets, 2 mm A-Style CP2 Connectors CP2-SA110-G1-KR Right Angle Socket Connectors mated to CP2-HA110-GA1-KR Header Connectors 78-5102-0083-1 Revised Date: February
More informationSpecification Approval Sheet
Name: Lithium Polymer Battery Model: 505396 SPEC: Number: 3.7V/2300mAh YKZ0809050622Y Approved By Checkup Make Signature Date Customer Company Name: Confirmation Stamp: Add: YOKU Industrial Zone Nangjing
More information3M Three-Wall and Four-Wall Headers. Series 3XXX
1 of 7 M Three-Wall and Four-Wall Headers Series XXX Product 78-10-0008-0 Released: 0-0-11 of 7 Table of Contents Section Page 1. Scope........ M Customer Documents....... Performance and Test Descriptions...
More informationMedium Voltage. Joints & Terminations
57 - Cold Shrink Joints Supporting Core Radially shrinkable elastomeric splice Semi-conductive layer High permitivity insulation layer 6.6/11/(12) kv 3M QS1000 is a one-piece cold shrink joint body manufactured
More informationIn-Rail-Bus Bus system in DIN-rail
In-Rail-Bus Bus system in DIN-rail PB (mounted in an enclosure) M3928_a Overview Overview spring contact block for In-Rail-Bus Designation KO4303-153 KS4460-12 KO4303-400 KO4303-401 Pole 5 5 5 8 Spring-contact
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSM. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSM Terminal Blocks Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Height: 15.2
More informationPower Splitter/Combiner
Ultra-Small Ceramic Power Splitter/Combiner 2 Way-90 50Ω 2500 to 4500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 15W* max. *
More informationDC Cabling Ready for 1,500 V DC
DC Cabling Ready for 1,500 V DC Perfectly connected MADE IN GERMANY Reduce your LCOE with 1,500V DC architecture What causes PV costs? Since 2010 the PV market has changed a lot. PV module costs have been
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More information2016 Unistar Plant Profile
Your Most Reliable Partner Since 2003 Kunshan Unistar Electronics Co., Ltd. 2016 Unistar Plant Profile History 2003 Formed Unistar Electronics, Co., Ltd, Kunshan, China /Register Capital USD$ 60M 2005
More informationBlade Fuses - Illuminated Mini Blade
Photo Fuse Features: The photo fuse is designed for the automobile and electrical industry. It has become the original equipment circuit protection standard for automobiles, trucks and low power system.
More informationFlangeless RF Device Mounting Procedures And Power Dissipation
Flangeless RF Device Mounting Procedures And Power Dissipation Albert Gu Phone: 541-382-8028 ext. 1200 albert.gu@microsemi.com Dick Frey Phone 541-382-8028 ext. 1111 dfrey@microsemi.com Gui Choi Phone:
More informationRoHS 2002/95/EC GREEN ELECTRONICS CRM. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS CONNECTORS
More informationMi Range 1,5 to 3,5 T
IC forklift trucks HANDLING SOLUTIONS Mi Range 1,5 to 3,5 T MANiTou, YouR key industrial PARTNeR A global group A global handling benchmark, the MANITOU group designs, assembles and distributes handling
More informationBOAX-B Mat E. Type Series Booklet
Butterfly Valve with Electric Actuator BOAX-B Mat E PS 16 bar: DN 40 to 200 PS 10 bar: DN 250 and 300 Design to EN 593 and ISO 10631 Type Series Booklet Legal information/copyright Type Series Booklet
More informationJUMO plastosens T. Temperature probes made of high-performance plastic
JUMO plastosens T Temperature probes made of high-performance plastic JUMO plastosens T01 Voltage-resistant plastic temperature probe In dry or cast resin transformers the use of temperature probes made
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CTF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.1 x 15.5 mm
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MCM. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MCM Terminal Blocks MCM Functional characteristics Dimensional class: high RoHS 2011/65/EU Standard colour: green 0 Height: 14.45
More information0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
More informationGeneral Purpose Relays Power Relays. T9G series, DC coil 30A PCB Relay
T9G series, DC coil 30A PCB Relay n 30A switching in NO and 20A in CO n Minimum Board space (29mm x 21.5mm) n Meets UL 508 for clearance / creepage n Meets IEC 61810-1 for reinforced insulation n Option
More informationAXON. Innovative Interconnect Solutions
AXON Innovative Interconnect Solutions SUMMARY THE AXON GROUP OUR TECHNOLOGICAL EXPERTISE IN MATERIALS OUR PRODUCT EXPERTISE QUALITY OUR PROCESS EXPERTISE «GREY MATTER» PROJECT TEAMS THE RESULT OF INNOVATION
More informationVIRTUO. Comfort ventilation boxes Self-supporting casing with lacquered
Comfort ventilation Self-supporting casing with lacquered finish as standard Air intake or exhaust operation Simplified access to internal components ErP READY Air flow: 500 to 35 000 m 3 /h Use ventilation
More informationPower Resistor Series
Version: February 24, 2017 Power Resistor Series Web: www.token.com.tw Email: rfq@token.com.tw Token Electronics Industry Co., Ltd. Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei City,
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSP. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSP Terminal Blocks Functional characteristics Dimensional class: high RoHS 2011/65/EU Standard colour: green Height: 0 21.5
More informationAmphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More informationAdam Technologies, Inc.
iec 320 & mini iec CoNNeCTorS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE and other applicable
More informationZK2.5-SP-4P PI-Spring Terminal Blocks Disconnect with plug - with test socket
Technical Datasheet 1SNK1659D01 Catalogue Page 1SNK160S01 ZK2.5-SP-P PI-Spring Terminal Blocks Disconnect with plug - with test socket The flexible solution for fitting the component of your choice in
More information*HDMI-STYLE WEATHERTIGHT CONNECTORS *HDMI-STYLE WEATHERTIGHT CONNECTORS NPB C714
601 E WILDWOOD VILLA PARK, IL 60181 P: 630.834.7504 F: 630.834.8540 WWW.CONXALL.COM FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when panel connector is rear mounted and mated to the cable)
More information