D-Sub Connectors. Catalog E /09 Edition 3
|
|
- Tyrone Wilson
- 6 years ago
- Views:
Transcription
1 Catalog E /09 Edition 3
2 Catalog E /09 Edition 3
3 Table of Contents General Available Designs Mating and Installation Conditions Signal Connectors with ERNIPRESS Technology Cable Versions Special Contact Versions Accessories for PCB Versions Connector Cable Housings Short Overview Electrical and Mechanical Characteristics Right Angle Female Right Angle Female High Current Stamped Contacts Right Angle Female High Current Machined Contacts Right Angle Male Right Angle Male High Current Stamped Contacts Right Angle Male High Current Machined Contacts Vertical Female Vertical Female High Current Vertical Male Vertical Male High Current Female and Male Connectors with Solder Cups Female and Male Connectors for Flat Ribbon Cables Female and Male Connectors for Discrete Wire IDC Female and Male Connectors for Crimp Snap-in Technique Housings for Female High Current Contacts Housings for Male High Current Contacts Part umber Index Catalog E /09 Edition 3 1
4 General Designed according to IEC (DIN ) and Mil-C D-Sub connectors are worldwide known as standardized I/O interfaces for several applications e.g. serial bus connection for RS232, RS485 used for Profibus, CanBus and others. Indirect mating system International approvals such as UL and CSA available Integrated acccessories 3 different connector types available: vertical, angled and cable connectors Approvals: UL E 84703, CSA LR and LR UL = Underwriters Laboratories Inc. CSA = Canadian Standards Association Cable connector versions: Wire-wrap technology Solder cup type for hand soldering Crimp Snap-In (CSI) techique IDC (Insulation Displacement Connection) for flat ribbon cables or flat/round cables IDC / crimp technique for discrete wires ESD ans EMI features: The metal connector shells are completely plated and the male shells have several contact points for a conductive and low resistance connection between male and female shell. The contact points are realized without having any apertures around the shell. Available termination technologies: PCB connector versions: THT (Through Hole Technology) for standard wave soldering ERNIPRESS Technology (solderless pressfit connection) THR (Through Hole Reflow) Technology for standard wave and reflow soldering (convection or vapour phase oven) SMT (Surface Mount Technology) for reflow soldering (convection or vapour phase oven) 2 Catalog E /09 Edition 3
5 Available Designs In principal there are three main different designs available. PCB connectors as angled or vertical verions and cable connectors for cable assemblies (used with cable housings). For each design there are also different styles designed according customer needs. A key requirement for PCB connectors is the assembly height. For the cable connectors the termination technique is essential for the "design in" decision. PCB Angled Versions Standard assembly height 7.3 mm according to IEC (DIN ) Standard assembly height 6.3 mm (called US-Style) according to IEC (DIN ) 5,6 6,0 6,3 9,0 11,0 3,6 7,3 6,3 Standard assembly height 3.6 mm (called Eurostyle) according to IEC (DIN ) PCB Vertical Versions ERNI provides various assembly heights within and in addition to the IEC-standard. Cable Connector Versions Catalog E /09 Edition 3 3
6 Mating and Installation Conditions Mating Face of D-Sub Connectors Standard Density High Density (not shown) DA Shell 15 position HD DA Shell 26 position DB Shell 25 position HD DB Shell 44 position DC Shell 37 position HD DC Shell 62 position DD Shell 50 position DE Shell 9 position HD DE Shell 15 position Mating Condition 6,4 bis 7,5 Panel Mount Recommendations B A 10 0,3 11,4 3,1 R4 0,3 5,7 Pohlzahl A +0,2 B +0,2 C ±0,1 D ±0,1 9 20,5 10,25 25,0 12, ,8 14,4 33,3 16, ,5 21,25 47,0 23,5 D 37 59,1 29,55 63,5 31,75 C 4 Catalog E /09 Edition 3
7 Signal Connectors with ERNIPRESS Technology Features Following shell sizes are supported 9, 15, 25 and 37 pins ERNIPRESS solderless pressfit technology permits cost effective and reliable connecting of connectors and printed circuit boards Elastic standard pressfit zone (EE) and eye of the needle zone (EN). Elastic pressfit zones prevent high forces from the PCB hole respectively material. There is no damaging of the copper layer or delamination of multi layers. Gast-tight, corrosion proof and robust mechanical and electrical connection No solder failures, no flux problems, no clean process, no thermal stress in case of having pure pressfit pcbs Easy handling low cost press-in tooling Allows two side assembly of connectors Accessories integrated into the connector International approvals such as UL and CSA available PCB requirements for ERNIPRESS Technology Hole specification is essential and have to be acc. to DIN as well as to DIN IEC Also for long-term stable pressfit connection, the PCB have to meet a min. quality level - Base material UL approved, Hgw to DIN 7735, FR 4 - Drill hole and PTH diameter tolerances - Quality of the hole surface in terms of roughness - Plating thinkness tolerances - Hole position tolerances - Minimal restring width of 0.1 mm Measurement of insertion and retention forces for quality assurance - Typical values for retention forces with an EE Zone are between N per contact For more details test reports are available on request. ERNIPRESS Advantages Contact is made in the copper-layer, not in the tin-layer of the PCB The high elasticity is able to compensate large hole tolerances or dimension changes over life time The pressfit zone design ensures a high edge pressure on the copper layer of the PCB hole resulting in a gas-tight connection For detailed hole specification refer to ERNI drawing Durchmesser des metallisierten Loches Diameter of finished plated-through hole 1 +0,09-0,06 1,15 0,025 min Bohrungsdurchmesser des Loches Diameter of drilled hole Restringbreite Restring width min. 25 µm Cu max. 15 µm Sn Catalog E /09 Edition 3 5
8 Cable Versions Crimp Snap-in (CSI) Technology ERNI supplies CSI versions for sizes 9, 15, 25 and 37 pin CSI contacts are available for different wire cross sections CSI contacts are available in various packaging units depending on the used crimping tools or required assembly process. Please see ordering information ERNI provides several crimping tools Individual contact assignment or partially loading of contacts are possible Intermatable with competitor products Suitable for the different ERNI cable housings KSG 183, KSG 185 and KSG 200, see separate catalog Wide range of accessories on request (MOQ required) - Integral riveting nuts for rear front plate fixation - Threaded bolts with internal thread for front assembly Special housing locking variantes see cable housing catalog IDC Flat Cable Connection ERNI supplies IDC versions for sizes 9, 15, 25 and 37 pin Contacting of all (max. 37) conductors in one assembly step No dismanteling of cables Suitable for standard flat cables with a pitch of 1.27 mm Optional with standard accessories (panel mount versions) Suitable for the different ERNI cable housings (KSG 183, KSG 185 and KSG 200) Optional strain relief bracket enables cable direction 90 and 180 IDC Discrete Wire Connection ERNI supplies versions for sizes 9, 15, 25 and 37 pin Easy and quick termination of discrete wires via Insulation Dis placement Connection (IDC) and insulation crimp technique Accepts stranded or solid wires 22 AWG - 26 AWG The tooling (hand or semi-automatic) provides high speed wire attachment and allows also partially loading of contacts Contacts are removable and replaceable Suitable for cable connector housing series KSG 200 with high EMI and ESD protection 6 Catalog E /09 Edition 3
9 Special Contact Versions Connectors With High Current Contacts 3W3 and 3WK3, shell size DA 5W5, shell size DB 8W8, shell size DC 7W2, shell size DA Cost saving ERNIPRESS technology for integrated pressfit backplanes, no soldering process is needed, no thermal stress on the PCB, gas-tight, corrosion-proof and robust connection Pressfit has a low failure rate only wire wrap technology is better New generation with stamped high current contacts Several machined contacts for crimping, soldering and pressfit Suitable for cable connector housing series KSG 183, KSG 185 and KSG 200, see separate catalog Partial loadings of power and signal contacts A1 A2 A3 A1 A2 A3 A1 A2 A3 A4 3W3 A1 A2 A3 A4 A5 A6 A7 A8 A A2 A5 7W2 5W5 8W8 3WK3 Connectors With Coaxial Contacts The connector housings for high current contacts can be also used for loading with according coax contacs. The coax contact accepts the same contact cavity. Several machined contacts for crimping and soldering Suitable for cable connector housing series KSG 183, KSG 185 and KSG 200, see separate catalog Catalog E /09 Edition 3 7
10 Accessories for PCB Versions Threaded nut, 4#40 UNC thread, integrated in connector front shell Torque protected against impact from housing screws or bolts Rear panel mounting application in conjunction with threaded bolts or standard screws Threaded bolts available as spare parts Threaded bolt, 4#40 UNC thread Necessary for screw locking of cable housings Integrated in connector with torque protection against impact from housing screws or bolts Bolts with circular contour, no manipulation with tools possible Screw fixation on PCB Available for pressfit and THR versions High retention force regarding handling in conjunction with cable housings No is needed; in conjunction with THR soldering there is also solder joint For EMI and ESD protection the bolts have low resistance connection to the front shell and shielded cable housing THR version should be screwed on before soldering Retention and ground clip for fixation on PCB Available for pressfit and THR versions Handling forces will be absorbed THR versions with/without For EMI and ESD protection the clips have low resistance connection to the front shell and shielded cable housing 8 Catalog E /09 Edition 3
11 Connector Cable Housings Short Overview ERNI is offering a broad range of different housings for D-Sub connectors. Those are split in several series: KSG 183 Available for D-Sub 9, 15, 25 and 37 pin versions Unshielded economic solution Special design for space saving "Snap-In" interlocking Max. three cable outlets possible with secure strain relief Suitable for front assembly and rear assembly of D-Sub connectors Suitable also for cable to cable connections KSG 185 Available for D-Sub 9, 15, 25 and 37 pin versions Housing for screw and / or "Snap-In" interlocking Unshielded economic solution and shielded version Integrated coding system Max. two cable outlets possible with secure strain relief Suitable also for cable to cable connections KSG 200 Available for D-Sub 9, 15, 25 and 37 pin versions Delivered as spare parts or as complete part kit including locking screws High shield attenuation 66db at 100 MHz Shielded and unshielded versions Secure strain relief Two housing parts with easy "Snap-In" assembly For more details and ordering information see separate cable housing catalog. Catalog E /09 Edition 3 9
12 Electrical and Mechanical Characteristics Standard SMT, THR Male- and Female Pressfit Male- and Female Number of pins 9, 15, 25 and 37 9, 15, 25 and 37 Technical Data Climate category Temperature range Current rating per contact Air- and creepage distance Operating voltage Dielectric strength Contact resistance Insulation resistance Vibration, sine Contact disturbance (while vibration test) Shock, halfsine Contact disturbance (while shock test) Mechanical operation (mating cycles) Insertion and withdrawal force Gauge retention force DIN EN test b IEC60512 test 5b IEC IEC test 4a IEC test 2a IEC test 3a IEC test 6d IEC test 2e IEC test 6c IEC test 2e IEC test 9a IEC test 13b IEC test 16e -55/125/56-55/125 C 20 C 70 C 100 C 9pin 5.7 A 3.7 A 2.6 A 15pin 4.8 A 3.5 A 2.3 A 25pin 4.4 A 3.3 A 2.1 A 37pin 3.9 A 2.8 A 1.8 A 1.2 mm The permissible operating voltages depend on the customer application and on the applicable or specified safety requirements. Insulation coordination according to IEC has to be regarded for the complete electrical device. Therefore, the maximum creepage and clearance distances of the mated connectors are specified for consideration as a part of the whole current path. In practice, reductions in creepage or clearance distances may occur due to the conductive pattern of the printed board or the wiring used, and have to be taken into account separately. As a result the creepage and clearance distances for the application may be reduced compared to those of the connector. contact - contact 1000 V rms contact - ground 1200 V rms < 25 mω > 5x10 9 Ω Hz 20 g < 1 µs 50 g 11 ms < 1 µs > 250 mating cycles Insertion force Withrawal force max. min. max. 9pin 30 N 3.3 N 20 N 15pin 50 N 4.5 N 50 N 25pin 83 N 7.8 N 56 N 37pin 123 N 11.0 N 82 N > 0.2 N -55/125/56-55/125 C 1.2 mm contact - contact 1000 V rms contact - ground 1200 V rms < 25 mω > 5x10 9 Ω Hz 20 g < 1 µs 50 g 11 ms < 1 µs > 250 mating cycles > 0.2 N 10 Catalog E /09 Edition 3
13 Electrical and Mechanical Characteristics Standard SMT, THR Male- and Female Pressfit Male- and Female Number of pins Process-conditions 9, 15, 25 and 37 9, 15, 25 and 37 Soldering temperature max. IEC Hand soldering temperature max. 3.5 s at 350 C - Dip soldering temperature max. 10 s at 260 C - Reflow soldering temperature max. JEDEC J-STD-020C s at 260 C - Coplanarity < 0.1 mm (SMT) - Warning - Soldering of pressfit connectors not to be recommended. Housing Material Housing: Plastic material LCP PBT CTI value IEC 112 CTI 175 CTI 200 UL flame rating UL 94 V-0 UL 94 V-0 UL file (material) E83005 E47960 Contact Material Base material Cu alloy Cu alloy Mating area gold plated gold plated Termination area Sn Sn Metal Shell Material Base material St St Plating Sn Sn Metal Bracket Material Base material Cu alloy Cu alloy Plating Sn Sn Environment Compatibility Recycling no flame-retardent additives, no toxic additives allow easy recycling Product-approval UL E84703 E84703 Catalog E /09 Edition
14 Electrical and Mechanical Characteristics Pin configurations Technical Data Climate Category Temperature range Current rating per contact Air- and creepage distance Operating voltage Dielectric strength Contact resistance Insulation resistance Vibration, sine Contact disturbance (while vibration test) Shock, halfsine Contact disturbance (while shock test) Mechanical operation (mating cycles) Insertion and withdrawal force Gauge retention force Standard DIN EN test b IEC test 5b IEC IEC test 4a IEC test 2a IEC test 3a IEC test 6d IEC test 2e IEC test 6c IEC test 2e IEC test 9a IEC test 13b IEC test 16e High Current Male- and Female Connectors SMT / THR / Solder stamped / machined contacts 3W3, 3WK3, 5W5, 8W8, 7W2-55/125/56-55/125 C See derating curves. 1.0 mm The permissible operating voltages depend on the customer application and on the applicable or specified safety requirements. Insulation coordination according to IEC has to be regarded for the complete electrical device. Therefore, the maximum creepage and clearance distances of the mated connectors are specified for consideration as a part of the whole current path. In practice, reductions in creepage or clearance distances may occur due to the conductive pattern of the printed board or the wiring used, and have to be taken into account separately. As a result the creepage and clearance distances for the application may be reduced compared to those of the connector. contact - contact 1000 V contact - ground 1000 V Signal contacts Power contacts > 5x10 9 Ω Hz 20 g < 1 µs 50 g 11 ms < 1 µs > 250 / 400 mating cycles < 30 N / 10 N max. per contact Signal contacts Power contacts < 25 mω < 1 mω 0.2 N min. 1.6 N min. High Current Male- and Female Connectors Pressfit stamped / machined contacts 3W3, 3WK3, 5W5, 8W8, 7W2-55/125/56-55/125 C 1.0 mm contact - contact 1000 V contact - ground 1000 V Signal contacts Power contacts > 5x10 9 Ω Hz 20 g < 1 µs 50 g 11 ms < 1 µs > 250 / 400 mating cycles < 30 N / 10 N max. per contact Signal contacts Power contacts < 25 mω < 1 mω 0.2 N min. 1.6 N min. 12 Catalog E /09 Edition 3
15 Electrical and Mechanical Characteristics Standard High Current Male- and Female Connectors SMT / THR / Solder stamped / machined contacts High Current Male- and Female Connectors Pressfit stamped / machined contacts Pin configurations Process-conditions 3W3, 3WK3, 5W5, 8W8, 7W2 3W3, 3WK3, 5W5, 8W8, 7W2 Solder temperature max. IEC Hand soldering temperature max. 3.5 s at 350 C - Dip soldering temperature max. 10 s at 260 C - Reflow soldering temperature max. JEDEC J-STD-020C s at 260 C / wave soldering machined contacts - Warning - Soldering of pressfit connectors not to be recommended. Housing Material Plastic material PA 46 / PBT PA 46 / PBT CTI value IEC 112 CTI 250 / CTI 200 CTI 250 / CTI 200 UL flame rating UL 94 V-0 UL 94 V-0 UL file E47960 E47960 Contact Material Base material Cu alloy Cu alloy Mating area Signal contact: gold plated Stamped contact: silver plated Machined contact: gold plated Signal contact: gold plated Stamped contact: silver plated Machined contact: gold plated Termination area Signal contact: Sn Stamped contact: silver plated Machined contact: gold plated Signal contact: Sn Stamped contact: silver plated Machined contact: gold plated Metall Shell Material Base material St St Plating Sn Sn Metal Bracket Material Base material Cu alloy Cu alloy Plating Sn Sn Environment Compatibility Recycling no flame-retardent additives, no toxic additives allow easy recycling Product-approval UL E84703 (stamped contacts) E84703 (stamped contacts) Catalog E /09 Edition
16 Electrical and Mechanical Characteristics Standard IDC flat cable/discrete wire Crimp Hand solder Number of pins 9, 15, 25 and 37 9, 15, 25 and 37 9, 15, 25 and 37 Wire cross section Flat cable: AWG 26 (solid wire) AWG 28 (stranded wire) Discrete wire: AWG AWG AWG 18 Technical Data Climate category Temperature range Current rating per contact Air- and creepage distance Operating voltage Dielectric strength Contact resistance Insulation resistance Vibration, sine Contact disturbance (while vibration test) Shock, halfsine Contact disturbance (while shock test) Mechanical operation (mating cycles) Insertion and withdrawal force Gauge retention force DIN EN test b IEC test 5b IEC IEC test 4a IEC test 2a IEC test 3a IEC test 6d IEC test 2e IEC test 6c IEC test 2e IEC test 9a IEC test 13b IEC test 16e -55/125/56-55/125 C Depending on used cable and see also derating curve of the connector. 0.9 mm The permissible operating voltages depend on the customer application and on the applicable or specified safety requirements. Insulation coordination according to IEC has to be regarded for the complete electrical device. Therefore, the maximum creepage and clearance distances of the mated connectors are specified for consideration as a part of the whole current path. In practice, reductions in creepage or clearance distances may occur due to the conductive pattern of the printed board or the wiring used, and have to be taken into account separately. As a result the creepage and clearance distances for the application may be reduced compared to those of the connector. contact-contact 750 V rms (flat cable) 1000 V rms (discrete wire) contact-ground 1200 V rms < 10 mω > 5x10 9 Ω Hz 20 g < 1 µs 50 g 11 ms < 1 µs > 250 mating cycles Insertion force Withrawal force max. min. max. 9pin 30 N 3.3 N 20 N 15pin 50 N 4.5 N 50 N 25pin 83 N 7.8 N 56 N 37pin 123 N 11.0 N 82 N > 0.2 N -55/125/56-55/125 C 1.2 mm contact-contact 1000 V rms contact-ground 1200 V rms < 10 mω > 5x10 9 Ω Hz 20 g < 1 µs 50 g 11 ms < 1 µs > 250 mating cycles > 0.2 N -55/125/56-55/125 C 1.0 mm contact-contact 1000 V rms contact-ground 1200 V rms < 10 mω > 5x10 9 Ω Hz 20 g < 1 µs 50 g 11 ms < 1 µs > 250 mating cycles > 0.2 N 14 Catalog E /09 Edition 3
17 Electrical and Mechanical Characteristics Standard IDC flat cable/discrete wire Crimp Hand solder Number of pins 9, 15, 25 and 37 9, 15, 25 and 37 9, 15, 25 and 37 Process-conditions Processing temperature 0/55 C 0/55 C - Hand soldering temperature max s at 350 C Housing Material Housing: Plastic material PBT PBT PBT CTI value IEC 112 CTI 275 CTI 275 CTI 200 UL flame rating UL 94 V-0 UL 94 V-0 UL 94 V-0 UL file (material) E47960 Contact Material Base material Cu alloy Cu alloy Cu alloy Mating area gold plated gold plated gold plated Termination area Sn Sn Sn Metal Shell Material Base material St St St Plating Sn Sn Sn Environment Compatibility Recycling no flame-retardent additives, no toxic additives allow easy recycling Attention The electrical and thermal variables may be influenced by whichever cable is used. Catalog E /09 Edition
18 Right Angle Female Dimensional Drawing SMT, Assembly Height 7.3 mm Pohlzahl No. of contacts A B C D E F G H Einbauhöhe / mounting height Gewinde / thread / #4-40 Bolzen/ bolt : thread LP / PCB LP / PCB All dimensions in mm 16 Catalog E /09 Edition 3
19 Right Angle Female Dimensional Drawing SMT, Assembly Height 3.6 mm Pohlzahl No. of contacts A B C D E F G H Layout mounting height Einbauhöhe / 8 1 Gewinde / thread / #4-40 x 5,6 Bolzen/ bolt : Gewinde / thread / #4-40 x Leiterplattenkante PCB edge LP / PCB LP / PCB Dimensional Drawing THR, Assembly Height 7.3 mm Version 1 Bestückung kraftlos without assembly farce Pohlzahl No. of contacts A B C D E F G Version 2 Layout / Version 1 A Bestückung mit Kraft with assembly farce 0.1 B Einbauhöhe mounting height Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread / #4-40 Leiterplattenkante PCB edge Layout / Version 2 A 0.1 A 0.1 B LP/ PCB LP/ PCB All dimensions in mm Leiterplattenkante PCB edge 0.1 A Catalog E /09 Edition
20 Right Angle Female Dimensional Drawing THR, Assembly Height 3.6 mm Ansicht X Version 1 Bestückung kraftlos without assembly farce Version 2 Bestückung mit Kraft with assembly farce Pohlzahl No. of contacts A B C D E F G Layout / Version1 0.1 B A Einbauhöhe mounting height Gewinde / thread / #4-40 Ansicht X Bolzen / bolt : Gewinde / thread / #4-40 Leiterplattenkante PCB edge Layout / Version B A 0.1 A LP / PCB LP / PCB Leiterplattenkante PCB edge 0.1 A Dimensional Drawing Pressfit, Assembly Height 7.3 mm Pohlzahl No. of contacts A B C D E F G Metal plating of plated-through hole see drawing No Einbauhöhe mounting height Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread / #4-40 A Layout 0.1 B LP/ PCB LP/ PCB Leiterplattenkante PCB edge 0.1 A All dimensions in mm 18 Catalog E /09 Edition 3
21 Right Angle Female Dimensional Drawing Pressfit (Clip), Assembly Height 3.6 mm Pohlzahl No. of A B C D E F G contacts Metal plating of plated-through hole see drawing No Einbauhöhe mounting height Gewinde / thread / #4-40 Bolzen / bolt: Gewinde / thread / # B A Layout LP/ PCB LP/PCB Leiterplattenkante PCB edge 0.1 A Dimensional Drawing Pressfit (Screw), Assembly Height 7.3 mm +0,2 A -0,4 ±0,3 12,6 8-0,2 0,6 B -0,2 C ±0,1 13,3 14,8 9 31,00 16,40 25,00 10,96 8,22 2,74 1, ,30 24,75 33,30 19,18 16,44 2,74 1, ,00 38,50 47,00 33,12 30,36 2,76 1, ,50 54,95 63,50 49,68 46,92 2,76 1,38 Pohlzahl A B C D E F G No. of contacts Metal plating of plated-through hole see drawing No ,3-0,25 Mutter / nut Bolzen / bolt 3,7 Anwendungsbeispiel / example of use ±0,1 Gewinde / thread Layoutvorschlag recommended layout 0,1 B F D +0,09 1-0,06 Pin 1 0,1 7,3 11,2 1, ±0,1 6,4 2 LP / PCB Gewinde / thread ( Schraube / Screw DIN 7984 ) 3,2 ±0,1 G F E C ±0,05 5 0,1 A empfohlene Gewindelänge / recommended thread length All dimensions in mm Catalog E /09 Edition
22 Right Angle Female Dimensional Drawing Pressfit (Screw), Assembly Height 3.6 mm ±0,3 12,6 13,3 13,8 6,3-0,25-0,2 8 0,6 +0,2 A -0,4 B -0,2 C ±0,1 9 31,00 16,40 25,00 10,96 8,22 2,74 1, ,3 24,75 33,30 19,18 16,44 2,74 1, ,00 38,50 47,00 33,12 30,36 2,76 1, ,50 54,95 63,50 49,68 46,92 2,76 1,38 Pohlzahl A B C D E F G No. of contacts Metal plating of plated-through hole see drawing No Mutter / nut Bolzen / bolt 3,7 Anwendungsbeispiel / example of use Gewinde / thread A Layoutvorschlag recommended layout D +0,09 1-0,06 0,1 7,5 ±0,1 8 0,1 B F Pin 1 1,27 6,4 ±0,1 3,6 2 8,9 LP / PCB Gewinde / thread 3,2 ±0,1 G F E 5 ( Schraube / Screw DIN 7984 ) empfohlene Gewindelänge / recommended thread length C ±0,05 0,1 A All dimensions in mm 20 Catalog E /09 Edition 3
23 Right Angle Female 9 Pin SMT Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 9 SMT 3.6 mm Through Hole Tray (32 pcs) mm 9 SMT 3.6 mm Through Hole 3.2 mm (125 pcs) SMT 3.6 mm Thread Tray (32 pcs) SMT 3.6 mm Thread Tray (32 pcs) SMT 3.6 mm Thread (125 pcs) SMT 3.6 mm Threaded bolt Tray (32 pcs) SMT 3.6 mm Threaded bolt Tray (32 pcs) SMT 7.3 mm Through Hole 3.2 mm Tray (32 pcs) SMT 7.3 mm Through Hole 3.2 mm SMT 7.3 mm Thread Tray (32 pcs) SMT 7.3 mm Thread Tray (32 pcs) SMT 7.3 mm Thread SMT 7.3 mm Threaded bolt Tray (32 pcs) SMT 7.3 mm Threaded bolt Tray (32 pcs) SMT 7.3 mm Threaded bolt Catalog E /09 Edition
24 Right Angle Female 9 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 9 THR 3.6 mm 3.0 mm Through Hole Clip with Tray (32 pcs) mm 9 THR 3.6 mm 3.0 mm Through Hole Clip without Tray (32 pcs) mm 9 THR 3.6 mm 3.0 mm Thread Clip with Tray (32 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (32 pcs) THR 3.6 mm 3.0 mm Thread Clip with Tray (32 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (32 pcs) THR 3.6 mm 3.0 mm Thread Clip without (125 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (32 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (32 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (32 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (32 pcs) Catalog E /09 Edition 3
25 Right Angle Female 9 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 9 THR 7.3 mm 3.0 mm Through Hole Clip with Tray (32 pcs) mm 9 THR 7.3 mm 3.0 mm Through Hole Clip without Tray (32 pcs) mm 9 THR 7.3 mm 3.0 mm Thread Clip with Tray (32 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (32 pcs) THR 7.3 mm 3.0 mm Thread Clip with Tray (32 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (32 pcs) THR 7.3 mm 3.0 mm Thread Clip without THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (32 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (32 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (32 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (32 pcs) Catalog E /09 Edition
26 Right Angle Female 9 Pin Pressfit Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 9 Pressfit 3.6 mm 3.0 mm Through Hole Clip Tray (32 pcs) mm 9 Pressfit 3.6 mm 3.0 mm Thread Clip Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Thread Clip Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Through Hole Clip Tray (32 pcs) mm 9 Pressfit 7.3 mm 3.0 mm Thread Clip Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Thread Clip Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Screw Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Thread Screw Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (32 pcs) Catalog E /09 Edition 3
27 Right Angle Female 15 Pin SMT Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 15 SMT 3.6 mm Through Hole Tray (24 pcs) mm 15 SMT 3.6 mm Thread Tray (24 pcs) SMT 3.6 mm Thread Tray (24 pcs) SMT 3.6 mm Threaded bolt Tray (24 pcs) SMT 3.6 mm Threaded bolt Tray (24 pcs) SMT 7.3 mm Through Hole Tray (24 pcs) mm 15 SMT 7.3 mm Thread Tray (24 pcs) SMT 7.3 mm Thread Tray (24 pcs) SMT 7.3 mm Threaded bolt Tray (24 pcs) SMT 7.3 mm Threaded bolt Tray (24 pcs) Catalog E /09 Edition
28 Right Angle Female 15 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 15 THR 3.6 mm 3.0 mm Through Hole Clip with Tray (24 pcs) mm 15 THR 3.6 mm 3.0 mm Through Hole Clip without Tray (24 pcs) mm 15 THR 3.6 mm 3.0 mm Thread Clip with Tray (24 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (24 pcs) THR 3.6 mm 3.0 mm Thread Clip with Tray (24 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (24 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (24 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (24 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (24 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (24 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with (125 pcs) Catalog E /09 Edition 3
29 Right Angle Female 15 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 15 THR 7.3 mm 3.0 mm Through Hole Clip with Tray (24 pcs) mm 15 THR 7.3 mm 3.0 mm Through Hole Clip without Tray (24 pcs) mm 15 THR 7.3 mm 3.0 mm Thread Clip with Tray (24 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (24 pcs) THR 7.3 mm 3.0 mm Thread Clip with Tray (24 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (24 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (24 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (24 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (24 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (24 pcs) Catalog E /09 Edition
30 Right Angle Female 15 Pin Pressfit Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 15 Pressfit 3.6 mm 3.0 mm Through Hole Clip Tray (24 pcs) mm 15 Pressfit 3.6 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Through Hole Clip Tray (24 pcs) mm 15 Pressfit 7.3 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Thread Screw Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Catalog E /09 Edition 3
31 Right Angle Female 25 Pin SMT Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 25 SMT 3.6 mm Through Hole Tray (20 pcs) mm 25 SMT 3.6 mm Thread Tray (20 pcs) SMT 3.6 mm Thread Tray (20 pcs) SMT 3.6 mm Threaded bolt Tray (20 pcs) SMT 3.6 mm Threaded bolt (125 pcs) SMT 3.6 mm Threaded bolt Tray (20 pcs) SMT 7.3 mm Through Hole 3.2 mm Tray (20 pcs) SMT 7.3 mm Through Hole 3.2 mm SMT 7.3 mm Thread Tray (20 pcs) SMT 7.3 mm Thread Tray (20 pcs) SMT 7.3 mm Threaded bolt Tray (20 pcs) SMT 7.3 mm Threaded bolt Tray (20 pcs) Catalog E /09 Edition
32 Right Angle Female 25 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 25 THR 3.6 mm 3.0 mm Through Hole Clip with Tray (20 pcs) mm 25 THR 3.6 mm 3.0 mm Through Hole Clip without Tray (20 pcs) mm 25 THR 3.6 mm 3.0 mm Thread Clip with Tray (20 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (20 pcs) THR 3.6 mm 3.0 mm Thread Clip with Tray (20 pcs) THR 3.6 mm 3.0 mm Thread 4-40 Clip without Tray (20 pcs) UNC 25 THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (20 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (20 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (20 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (20 pcs) Catalog E /09 Edition 3
33 Right Angle Female 25 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 25 THR 7.3 mm 3.0 mm Through Hole Clip with Tray (20 pcs) mm 25 THR 7.3 mm 3.0 mm Through Hole Clip without Tray (20 pcs) mm 25 THR 7.3 mm 3.0 mm Thread Clip with Tray (20 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (20 pcs) THR 7.3 mm 3.0 mm Thread Clip with Tray (20 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (20 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (20 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (20 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (20 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (20 pcs) Catalog E /09 Edition
34 Right Angle Female 25 Pin Pressfit Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 25 Pressfit 3.6 mm 3.0 mm Through Hole Clip Tray (20 pcs) mm 25 Pressfit 3.6 mm 3.0 mm Thread Clip Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Thread Clip Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Through Hole Clip Tray (20 pcs) mm 25 Pressfit 7.3 mm 3.0 mm Thread Clip Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Thread Clip Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Screw Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Thread Screw Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (20 pcs) Catalog E /09 Edition 3
35 Right Angle Female 37 Pin SMT Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 37 SMT 3.6 mm Through Hole Tray (16 pcs) mm 37 SMT 3.6 mm Thread Tray (16 pcs) SMT 3.6 mm Thread Tray (16 pcs) SMT 3.6 mm Threaded bolt Tray (16 pcs) SMT 3.6 mm Threaded bolt Tray (16 pcs) SMT 7.3 mm Through Hole Tray (16 pcs) mm 37 SMT 7.3 mm Thread Tray (16 pcs) SMT 7.3 mm Thread Tray (16 pcs) SMT 7.3 mm Threaded bolt Tray (16 pcs) SMT 7.3 mm Threaded bolt Tray (16 pcs) Catalog E /09 Edition
36 Right Angle Female 37 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 37 THR 3.6 mm 3.0 mm Through Hole Clip with Tray (16 pcs) mm 37 THR 3.6 mm 3.0 mm Through Hole Clip without Tray (16 pcs) mm 37 THR 3.6 mm 3.0 mm Thread Clip with Tray (16 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (16 pcs) THR 3.6 mm 3.0 mm Thread Clip with Tray (16 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (16 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (16 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (16 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (16 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (16 pcs) Catalog E /09 Edition 3
37 Right Angle Female 37 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 37 THR 7.3 mm 3.0 mm Through Hole Clip with Tray (16 pcs) mm 37 THR 7.3 mm 3.0 mm Through Hole Clip without Tray (16 pcs) mm 37 THR 7.3 mm 3.0 mm Thread Clip with Tray (16 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (16 pcs) THR 7.3 mm 3.0 mm Thread Clip with Tray (16 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (16 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (16 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (16 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (16 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (16 pcs) Catalog E /09 Edition
38 Right Angle Female 37 Pin Pressfit Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 37 Pressfit 3.6 mm 3.0 mm Through Hole Clip Tray (16 pcs) mm 37 Pressfit 3.6 mm 3.0 mm Thread Clip Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Thread Clip Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Through Hole Clip Tray (16 pcs) mm 37 Pressfit 7.3 mm 3.0 mm Thread Clip Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Thread Clip Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Screw Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Thread Screw Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (16 pcs) Catalog E /09 Edition 3
39 Right Angle Female High Current 7W2, 3W3, 3WK3 Versions with stamped high current contacts Dimensional Drawing 7W2 SMT, THR and Pressfit Versions, Assembly Height 7.3 mm 39,3 +0,2-0,4 24,75-0,2 A2 A1 12,6 0,3-0, ,3 0,1 Einbauhöhe / mounting height 6,3-0,25 14,7 ohne / without Durchgangsloch ø3,2 through hole ø 3,2 Mutter / nut Gewinde / thread / #4-40 Bolzen / bolt Gewinde / thread / # ,2 0,1 7,3 0,1 3,7 6,4 LP / PCB 11,7 0,2 All dimensions in mm Catalog E /09 Edition
40 Right Angle Female High Current 7W2, 3W3, 3WK3 Dimensional Drawing 7W2 SMT 39,1 13,72 2,74 3,8 1,7-0,05 5,8 Dimensional Drawing 7W2 THR Layout 0.1 B A 17,44 8,72 3,72 3,72 2,54 2,74 1,27 2,54 11,7max. 2,54 15,35 10,45-0,2 7,9 2,8 9,2 3, ,2 0,05 Leiterplattenkante PCB edge 3,2 0,1 2,74 2,74 B 1 0,1 (17x) Leiterplattenkante PCB edge 33,3 0,05 Sonstige Angaben siehe / Additional indications please see Dimensional Drawing 7W2 Pressfit 0.1 B 3 +0,04-0,06 A 8,72 17,44 3,72 3,72 2,54 2,74 1,27 2,54 11,7max. 2,54 2,74 2,74 Leiterplattenkante PCB edge 1 +0,09-0,06 (17x) 33,3 0,05 ø A All dimensions in mm 38 Catalog E /09 Edition 3
41 Right Angle Female High Current 7W2, 3W3, 3WK3 Dimensional Drawing 3W3, 3WK3 SMT All dimensions in mm Catalog E /09 Edition
42 Right Angle Female High Current 7W2 SMT Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 7W2 SMT 25 A 7.3 mm Through Hole 3.2 mm W2 SMT 25 A 7.3 mm Thread W2 SMT 25 A 7.3 mm Thread W2 SMT 25 A 7.3 mm Threaded bolt W2 SMT 25 A 7.3 mm Threaded bolt Catalog E /09 Edition 3
43 Right Angle Female High Current 7W2 THR Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 7W2 THR 25 A 7.3 mm 3.0 mm Through Hole 3.2 mm Clip with Tray (24 pcs) W2 THR 25 A 7.3 mm 3.0 mm Thread Clip with Tray (24 pcs) W2 THR 25 A 7.3 mm 3.0 mm Thread 7W2 THR 25 A 7.3 mm 3.0 mm Threaded bolt 7W2 THR 25 A 7.3 mm 3.0 mm Threaded bolt Clip with Clip with Clip with Tray (24 pcs) Tray (24 pcs) Tray (24 pcs) Catalog E /09 Edition
44 Right Angle Female High Current 7W2 Pressfit Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 7W2 Pressfit 25 A 7.3 mm 3.0 mm Through Hole 3.2 mm Clip Tray (24 pcs) W2 Pressfit 25 A 7.3 mm 3.0 mm Thread Clip Tray (24 pcs) W2 Pressfit 25 A 7.3 mm 3.0 mm Thread Clip Tray (24 pcs) W2 Pressfit 25 A 7.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) W2 Pressfit 25 A 7.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Catalog E /09 Edition 3
45 Right Angle Female High Current 3W3, 3WK3 SMT Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 3W3 SMT 7.3 mm Through Hole 3.2 mm W3 SMT 7.3 mm Thread W3 SMT 7.3 mm Thread W3 SMT 7.3 mm Threaded bolt W3 SMT 7.3 mm Threaded bolt WK3 SMT 7.3 mm Through Hole 3.2 mm WK3 SMT 7.3 mm Thread WK3 SMT 7.3 mm Thread WK3 SMT 7.3 mm Threaded bolt WK3 SMT 7.3 mm Threaded bolt Catalog E /09 Edition
46 Right Angle Female High Current 3W3, 3WK3, 5W5, 8W8 Versions with machined high current contacts Dimensional Drawing 3W3/3WK3, 5W5 and 8W8, Assembly Height 7.3 mm All dimensions in mm 44 Catalog E /09 Edition 3
47 Right Angle Female High Current 3W3, 3WK3, 5W5, 8W8 Dimensional Drawing 3W3/3WK3, 5W5 and 8W8 Leiterplatten-Bohrbild S 3W3, 3WK3 PC Board Hole Pattern S 3W3, 3WK ,8 10,67 3,2 0,1 2x 4,05 0,1 3x Leiterplatten-Bohrbild S 5W5 PC Board Hole Pattern S 5W ,8 10,67 3,2 0,1 2x 4,05 0,1 5x Leiterplatten-Bohrbild S 8W8 PC Board Hole Pattern S 8W ,8 10,67 2x 8x 3,2 0,1 4,05 0, All dimensions in mm Catalog E /09 Edition
48 Right Angle Female High Current 3W3, 3WK3, 5W5, 8W8 3W3 Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 3W3 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) W3 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) WK3 Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 3WK3 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) WK3 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) W5 Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 5W5 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) W5 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) W8 Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 8W8 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) W8 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) Catalog E /09 Edition 3
49 Right Angle Male Dimensional Drawing SMT, Assembly Height 7.3 mm Pohlzahl No. of contacts A B C D E F G H Layout 8 1 Einbauhöhe / mounting height Gewinde / thread / #4-40 Bolzen/ bolt : Gewinde / thread / # Leiterplattenkante PCB edge LP / PCB LP / PCB All dimensions in mm Catalog E /09 Edition
50 Right Angle Male Dimensional Drawing SMT, Assembly Height 3.6 mm Pohlzahl No. of contacts A B C D E F G H Layout 8 1 mounting height Einbauhöhe / Gewinde / thread / #4-40 x 5,6 Bolzen/ bolt : Gewinde / thread / #4-40 x LP / PCB LP / PCB Leiterplattenkante PCB edge Dimensional Drawing THR, Assembly Height 7.3 mm Version 1 Bestückung kraftlos without assembly farce Ansicht X Version Pohlzahl No. of contacts A B C D E F G Bestückung mit Kraft with assembly farce Layout / Version B A Einbauhöhe mounting height Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread / #4-40 Leiterplattenkante PCB edge 0.1 A Layout / Version 2 A 0.1 B All dimensions in mm Leiterplattenkante PCB edge 0.1 A 48 Catalog E /09 Edition 3
51 Right Angle Male Dimensional Drawing THR, Assembly Height 3.6 mm Version 1 Bestückung kraftlos powerless assembly Ansicht X Version 2 Bestückung mit Kraft assembly with force Layout / Version 1 A 0.1 B 1 8 Einbauhöhe mounting height Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread / #4-40 Leiterplattenkante PCB edge A Layout / Version 2 A 0.1 B LP / PCB LP / PCB Leiterplattenkante PCB edge 0.1 A Dimensional Drawing Pressfit (Clip), Assembly Height 7.3 mm Pohlzahl No. of contacts A B C D E F G Metal plating of plated-through hole see drawing No Einbauhöhe mounting height Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread / #4-40 Layout A 0.1 B LP/ PCB All dimensions in mm LP/ PCB Leiterplattenkante PCB edge 0.1 A Catalog E /09 Edition
52 Right Angle Male Dimensional Drawing Pressfit (Clip), Assembly Height 3.6 mm Pohlzahl No. of contacts A B C D E F G Metal plating of plated-through hole see drawing No mounting height Einbauhöhe / Gewinde / thread / #4-40 Bolzen/ bolt : Layout A Gewinde / thread / # B LP / PCB LP / PCB Leiterplattenkante PCB edge 0.1 A Dimensional Drawing Pressfit (Screw), Assembly Height 3.6 mm 12,6 ±0,3 +0,2 8,25 0,6 A +0,2-0,4 B +0,2 C ±0,1 13,3 13,8 9 31,00 16,80 25,00 10,96 8,22 2,74 1, ,30 25,10 33,30 19,18 16,44 2,74 1, ,00 38,90 47,00 33,12 30,36 2,76 1, ,50 55,30 63,50 49,68 46,92 2,76 1,38 Pohlzahl A B C D E F G No. of contacts Metal plating of plated-through hole see drawing No Mutter / nut Bolzen / bolt 3,7 5,8 +0,3 Anwendungsbeispiel / example of use Gewinde / thread 0,1 B A F Pin 1 Layoutvorschlag recommended layout D +0,09 1-0,06 0,1 7,5 8 ±0,1 1,27 3 All dimensions in mm 6,4 3,6 ±0,1 2 8,9 LP / PCB Gewinde / thread ( Schraube / Screw DIN 7984 ) empfohlene Gewindelänge / recommended thread length ±0,1 3,2 G F E C ±0,05 5 0,1 A 50 Catalog E /09 Edition 3
53 Right Angle Male Dimensional Drawing Pressfit (Screw), Assembly Height 7.3 mm 12,6 ±0,3 8,25 +0,2 0,6 +0,2 A -0,4 +0,2 B C ±0,1 9 31,00 16,80 25,00 10,96 8,22 2,74 1, ,30 25,10 33,30 19,18 16,44 2,74 1, ,00 38,90 47,00 33,12 30,36 2,76 1, ,50 55,30 63,50 49,68 46,92 2,76 1,38 Pohlzahl A B C D E F G No. of contacts 5,8 +0,3 13,3 14,8 Mutter / nut Bolzen / bolt 3,7 Anwendungsbeispiel / example of use Gewinde / thread 0,1 B A Pin 1 F D +0,09 1-0,06 0,1 1,27 3 ±0,1 6,4 11,2 12 7,3 ±0,1 LP / PCB ±0,1 3,2 G F E 5 2 Gewinde / threada ( Schraube / Screw DIN 7984 ) 33,3 ±0,05 0,1 empfohlene Gewindelänge / recommended thread length All dimensions in mm Catalog E /09 Edition
54 Right Angle Male 9 Pin SMT Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 9 SMT 3.6 mm Through Hole Tray (32 pcs) mm 9 SMT 3.6 mm Through Hole 3.2 mm (125 pcs) SMT 3.6 mm Thread Tray (32 pcs) SMT 3.6 mm Thread Tray (32 pcs) SMT 3.6 mm Thread (125 pcs) SMT 3.6 mm Threaded bolt Tray (32 pcs) SMT 3.6 mm Threaded bolt Tray (32 pcs) SMT 7.3 mm Through Hole 3.2 mm Tray (32 pcs) SMT 7.3 mm Through Hole 3.2 mm SMT 7.3 mm Thread Tray (32 pcs) SMT 7.3 mm Thread Tray (32 pcs) SMT 7.3 mm Thread SMT 7.3 mm Threaded bolt Tray (32 pcs) SMT 7.3 mm Threaded bolt Tray (32 pcs) Catalog E /09 Edition 3
55 Right Angle Male 9 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 9 THR 3.6 mm 3.0 mm Through Hole Clip with Tray (32 pcs) mm 9 THR 3.6 mm 3.0 mm Through Hole Clip without Tray (32 pcs) mm 9 THR 3.6 mm 3.0 mm Thread Clip with Tray (32 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (32 pcs) THR 3.6 mm 3.0 mm Thread Clip with Tray (32 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (32 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (32 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (32 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (32 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (32 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without (125 pcs) Catalog E /09 Edition
56 Right Angle Male 9 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 9 THR 7.3 mm 3.0 mm Through Hole Clip with Tray (32 pcs) mm 9 THR 7.3 mm 3.0 mm Through Hole Clip without Tray (32 pcs) mm 9 THR 7.3 mm 3.0 mm Thread Clip with Tray (32 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (32 pcs) THR 7.3 mm 3.0 mm Thread Clip with Tray (32 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (32 pcs) THR 7.3 mm 3.0 mm Thread Clip without THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (32 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (32 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (32 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (32 pcs) Catalog E /09 Edition 3
57 Right Angle Male 9 Pin Pressfit Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 9 Pressfit 3.6 mm 3.0 mm Through Hole Clip Tray (32 pcs) mm 9 Pressfit 3.6 mm 3.0 mm Thread Clip Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Thread Clip Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Through Hole Clip Tray (32 pcs) mm 9 Pressfit 7.3 mm 3.0 mm Thread Clip Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Thread Clip Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (32 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Screw Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Thread Screw Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (32 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (32 pcs) Catalog E /09 Edition
58 Right Angle Male 15 Pin SMT Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 15 SMT 3.6 mm Through Hole Tray (24 pcs) mm 15 SMT 3.6 mm Thread Tray (24 pcs) SMT 3.6 mm Thread Tray (24 pcs) SMT 3.6 mm Threaded bolt Tray (24 pcs) SMT 3.6 mm Threaded bolt Tray (24 pcs) SMT 7.3 mm Through Hole Tray (24 pcs) mm 15 SMT 7.3 mm Thread Tray (24 pcs) SMT 7.3 mm Thread 4-40 Tray (24 pcs) UNC 15 SMT 7.3 mm Threaded bolt Tray (24 pcs) SMT 7.3 mm Threaded bolt Tray (24 pcs) SMT 7.3 mm Threaded bolt Catalog E /09 Edition 3
59 Right Angle Male 15 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 15 THR 3.6 mm 3.0 mm Through Hole Clip with Tray (24 pcs) mm 15 THR 3.6 mm 3.0 mm Through Hole Clip without Tray (24 pcs) mm 15 THR 3.6 mm 3.0 mm Thread Clip with Tray (24 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (24 pcs) THR 3.6 mm 3.0 mm Thread Clip with Tray (24 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (24 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (24 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (24 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (24 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (24 pcs) Catalog E /09 Edition
60 Right Angle Male 15 Pin No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 15 THR 7.3 mm 3.0 mm Through Hole Clip with Tray (24 pcs) mm 15 THR 7.3 mm 3.0 mm Through Hole Clip without Tray (24 pcs) mm 15 THR 7.3 mm 3.0 mm Thread Clip with Tray (24 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (24 pcs) THR 7.3 mm 3.0 mm Thread Clip with Tray (24 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (24 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (24 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (24 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (24 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (24 pcs) Catalog E /09 Edition 3
61 Right Angle Male 15 Pin Pressfit Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 15 Pressfit 3.6 mm 3.0 mm Through Hole Clip Tray (24 pcs) mm 15 Pressfit 3.6 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Through Hole Clip Tray (24 pcs) mm 15 Pressfit 7.3 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (24 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Thread Screw Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Catalog E /09 Edition
62 Right Angle Male 25 Pin SMT Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 25 SMT 3.6 mm Through Hole Tray (20 pcs) mm 25 SMT 3.6 mm Thread Tray (20 pcs) SMT 3.6 mm Thread Tray (20 pcs) SMT 3.6 mm Threaded bolt Tray (20 pcs) SMT 3.6 mm Threaded bolt Tray (20 pcs) SMT 7.3 mm Through Hole Tray (20 pcs) mm 25 SMT 7.3 mm Through Hole 3.2 mm SMT 7.3 mm Thread Tray (20 pcs) SMT 7.3 mm Thread Tray (20 pcs) SMT 7.3 mm Threaded bolt Tray (20 pcs) SMT 7.3 mm Threaded bolt Tray (20 pcs) Catalog E /09 Edition 3
63 Right Angle Male 25 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 25 THR 3.6 mm 3.0 mm Through Hole Clip with Tray (20 pcs) mm 25 THR 3.6 mm 3.0 mm Through Hole Clip without Tray (20 pcs) mm 25 THR 3.6 mm 3.0 mm Thread Clip with Tray (20 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (20 pcs) THR 3.6 mm 3.0 mm Thread Clip with Tray (20 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (20 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (20 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (20 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (20 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (20 pcs) Catalog E /09 Edition
64 Right Angle Male 25 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 25 THR 7.3 mm 3.0 mm Through Hole Clip with Tray (20 pcs) mm 25 THR 7.3 mm 3.0 mm Through Hole Clip without Tray (20 pcs) mm 25 THR 7.3 mm 3.0 mm Thread Clip with Tray (20 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (20 pcs) THR 7.3 mm 3.0 mm Thread Clip without THR 7.3 mm 3.0 mm Thread Clip with Tray (20 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (20 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (20 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (20 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (20 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (20 pcs) Catalog E /09 Edition 3
65 Right Angle Male 25 Pin Pressfit Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 25 Pressfit 3.6 mm 3.0 mm Through Hole Clip Tray (20 pcs) mm 25 Pressfit 3.6 mm 3.0 mm Thread Clip Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Thread Clip Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Through Hole Clip Tray (20 pcs) mm 25 Pressfit 7.3 mm 3.0 mm Thread Clip Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Thread Clip Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (20 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Screw Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Thread Screw Tray (20 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw 4-40 Tray (20 pcs) UNC 25 Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (20 pcs) Catalog E /09 Edition
66 Right Angel Male 37 Pin SMT Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 37 SMT 3.6 mm Through Hole Tray (16 pcs) mm 37 SMT 3.6 mm Thread Tray (16 pcs) SMT 3.6 mm Thread Tray (16 pcs) SMT 3.6 mm Threaded bolt Tray (16 pcs) SMT 3.6 mm Threaded bolt Tray (16 pcs) SMT 7.3 mm Through Hole Tray (16 pcs) mm 37 SMT 7.3 mm Thread Tray (16 pcs) SMT 7.3 mm Thread Tray (16 pcs) SMT 7.3 mm Threaded bolt Tray (16 pcs) SMT 7.3 mm Threaded bolt Tray (16 pcs) Catalog E /09 Edition 3
67 Right Angel Male 37 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 37 THR 3.6 mm 3.0 mm Through Hole Clip with Tray (16 pcs) mm 37 THR 3.6 mm 3.0 mm Through Hole Clip without Tray (16 pcs) mm 37 THR 3.6 mm 3.0 mm Thread Clip with Tray (16 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (16 pcs) THR 3.6 mm 3.0 mm Thread Clip with Tray (16 pcs) THR 3.6 mm 3.0 mm Thread Clip without Tray (16 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (16 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (16 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip with Tray (16 pcs) THR 3.6 mm 3.0 mm Threaded bolt Clip without Tray (16 pcs) Catalog E /09 Edition
68 Right Angel Male 37 Pin THR Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 37 THR 7.3 mm 3.0 mm Through Hole Clip with Tray (16 pcs) mm 37 THR 7.3 mm 3.0 mm Through Hole Clip without Tray (16 pcs) mm 37 THR 7.3 mm 3.0 mm Thread Clip with Tray (16 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (16 pcs) THR 7.3 mm 3.0 mm Thread Clip with Tray (16 pcs) THR 7.3 mm 3.0 mm Thread Clip without Tray (16 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (16 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (16 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip with Tray (16 pcs) THR 7.3 mm 3.0 mm Threaded bolt Clip without Tray (16 pcs) Catalog E /09 Edition 3
69 Right Angel Male 37 Pin Pressfit Versions No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 37 Pressfit 3.6 mm 3.0 mm Through Hole Clip Tray (16 pcs) mm 37 Pressfit 3.6 mm 3.0 mm Thread Clip Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Thread Clip Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Clip Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Through Hole Clip Tray (16 pcs) mm 37 Pressfit 7.3 mm 3.0 mm Thread Clip Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Thread Clip Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Clip Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Thread Screw Tray (16 pcs) Pressfit 3.6 mm 3.0 mm Threaded bolt Screw Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Thread Screw Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (16 pcs) Pressfit 7.3 mm 3.0 mm Threaded bolt Screw Tray (16 pcs) Catalog E /09 Edition
70 Right Angle Male High Current 7W2, 3W3, 3WK3 Versions with stamped high current contacts Dimensional Drawing 7W2 SMT, THR and Pressfit Versions, Assembly Height 7.3 mm +0,2 39,3-0,4 25,1 +0,2 A1 A2 12,6 0,3 8,25 +0, ,3 0,1 11,2 0,1 7,3 0,1 3,7 14,7 Einbauhöhe / mounting height 5,8 +0,3 Durchgangsloch ø 3,2 through hole ø 3,2 Gewinde / thread / #4-40 Gewinde / thread / #4-40 LP / PCB 11,2 0,2 6,4 ohne / without Mutter / nut Bolzen / bolt All dimensions in mm 68 Catalog E /09 Edition 3
71 Right Angle Male High Current 7W2, 3W3, 3WK3 Dimensional Drawing 7W2 SMT 39,1 13,72 2,74 3,8 1,7-0,05 5,8 Dimensional Drawing 7W2 Pressfit A 8,72 17, B 15,35 10,45-0,2 7,9 2,8 9,2 3, ,2 0,05 Dimensional Drawing 7W2 THR Leiterplattenkante PCB edge 0.1 B 3 +0,04-0,06 A 8,72 17,44 3,72 3,72 2,54 2,74 1,27 2,54 11,7max. 2,54 2,74 2,74 Leiterplattenkante 1 +0,09-0,06 (17x) ø0.1 PCB edge 33,3 0, A 3,2 0,1 3,72 3,72 2,54 2,74 1,27 2,54 11,7max. 2,54 2,74 2,74 Leiterplattenkante 1 0,1 (17x) ø0.1 PCB edge 33,3 0, A All dimensions in mm Catalog E /09 Edition
72 Right Angle Male High Current 7W2, 3W3, 3WK3 Dimensional Drawing 3W3, 3WK3 SMT All dimensions in mm 70 Catalog E /09 Edition 3
73 Right Angle Male High Current 7W2, 3W3, 3WK3 Dimensional Drawing 3W3, 3WK3 THR All dimensions in mm Catalog E /09 Edition
74 Right Angle Male High Current 7W2 SMT Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 7W2 SMT 25 A 7.3 mm Through Hole 3.2 mm W2 SMT 25 A 7.3 mm Thread W2 SMT 25 A 7.3 mm Thread W2 SMT 25 A 7.3 mm Threaded bolt W2 SMT 25 A 7.3 mm Threaded bolt Catalog E /09 Edition 3
75 Right Angle Male High Current 7W2 THR Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 7W2 THR 25 A 7.3 mm 3.0 mm Through Hole 3.2 mm Clip with Tray (24 pcs) W2 THR 25 A 7.3 mm 3.0 mm Thread Clip with Tray (24 pcs) W2 THR 25 A 7.3 mm 3.0 mm Thread 7W2 THR 25 A 7.3 mm 3.0 mm Threaded bolt 7W2 THR 25 A 7.3 mm 3.0 mm Threaded bolt Clip with Clip with Clip with Tray (24 pcs) Tray (24 pcs) Tray (24 pcs) Catalog E /09 Edition
76 Right Angle Male High Current 7W2 Pressfit Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 7W2 Pressfit 25 A 7.3 mm 3.0 mm Through Hole 3.2 mm Clip Tray (24 pcs) W2 Pressfit 25 A 7.3 mm 3.0 mm Thread Clip Tray (24 pcs) W2 Pressfit 25 A 7.3 mm 3.0 mm Thread Clip Tray (24 pcs) W2 Pressfit 25 A 7.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) W2 Pressfit 25 A 7.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Catalog E /09 Edition 3
77 Right Angle Male High Current 3W3, 3WK3 SMT Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 3W3 SMT 7.3 mm Through Hole 3.2 mm W3 SMT 7.3 mm Thread W3 SMT 7.3 mm Thread W3 SMT 7.3 mm Threaded bolt W3 SMT 7.3 mm Threaded bolt WK3 SMT 7.3 mm Through Hole 3.2 mm WK3 SMT 7.3 mm Thread WK3 SMT 7.3 mm Thread WK3 SMT 7.3 mm Threaded bolt WK3 SMT 7.3 mm Threaded bolt Catalog E /09 Edition
78 Right Angle Male High Current 3W3, 3WK3 THR Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 3W3 THR 7.3 mm 3.0 mm Through Hole 3.2 mm Clip with Tray (24 pcs) W3 THR 7.3 mm 3.0 mm Thread Clip with Tray (24 pcs) W3 THR 7.3 mm 3.0 mm Thread 3W3 THR 7.3 mm 3.0 mm Threaded bolt 3W3 THR 7.3 mm 3.0 mm Threaded bolt Clip with Clip with Clip with Tray (24 pcs) Tray (24 pcs) Tray (24 pcs) Catalog E /09 Edition 3
79 Right Angle Male High Current 3W3, 3WK3, 5W5, 8W8 Versions with machined high current contacts Dimensional Drawing 3W3, 3WK3, 5W5 and 8W8, Assembly Height 7.3 mm All dimensions in mm Catalog E /09 Edition
80 Right Angle Male High Current 3W3, 3WK3, 5W5, 8W8 Dimensional Drawing 3W3/3WK3 Solder Leiterplatten-Bohrbild P 3W3, 3WK3 PC Board Hole Pattern P 3W3, 3WK ,8 10,67 3,2 0,1 2x 4,05 0,1 3x Dimensional Drawing 5W5 Solder Leiterplatten-Bohrbild P 5W5 PC Board Hole Pattern P 5W Dimensional Drawing 8W8 Solder Leiterplatten-Bohrbild P 8W8 PC Board Hole Pattern P 8W ,8 10,67 11,8 10,67 3,2 0,1 2x 4,05 0,1 5x All dimensions in mm 3,2 0,1 2x 4,05 0,1 8x Catalog E /09 Edition 3
81 Right Angle Male High Current 3W3/3WK3, 5W5, 8W8 3W3 Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 3W3 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) W3 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) WK3 Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 3WK3 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) WK3 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) W5 Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 5W5 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) W5 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) W8 Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 8W8 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) W8 Solder 30 A 7.3 mm 3.7 mm Riveted nut Clip Cardboard (25 pcs) Catalog E /09 Edition
82 Vertical Female Dimensional Drawing SMT 1,4 0,7 1,5 Leiterplatte pcb 0,6 2,8 6,3 5-0,2 Y Pohlzahl No. of contacts A B C D E F G H A +0,2-0,4 Ansaughaube hood B -0, ,8 12,6 ±0,3 8-0,2 ohne / without 3,1 C ±0,1 Mutter / nut Gewinde / thread / #4-40 Bolzen / bolt 3,7 Gewinde / thread / #4-40 6,4 0,1 B 13 hole / Bohrung A 1,7x 45 (4x) 1 ±0,05 1,8 3,4 H Layout: D F F E C G ±0,05 ±0,2 Pin 1 1,8 (15x) 0,1 3,4 3,1 ±0,05 2,84 B 0,1 0,1 A A 12,2 All dimensions in mm 80 Catalog E /09 Edition 3
83 Vertical Female Dimensional Drawing THR 3,2 6,3 5-0,2 Leiterplatte pcb Ansaughaube nur bei Version 1 hood only on version 1 0,6 A +0,2-0,4 L Y Variante 1 version 1 Bestückung kraftlos powerless assembly Pohlzahl No. of contacts A B C D E F G B -0,2 16 Variante 2 version 2 Bestückung mit Kraft assembly with force 13,8 ±0,3 12,6 8-0, 2 Layout: Version 1 / 2 ohne / without C ±0,1 Mutter / nut Gewinde / thread / #4-40 Bolzen / bolt 3,7 Gewinde / thread / #4-40 0,1 B A F +0,09 1-0,06 D (15x) Pin 1 0,1 2,84 6,4 ±0,1 3,2 G F E C ±0,05 B 0,1 A Dimensional Drawing Solder Leiterplatte pcb Pohlzahl No. of contacts A B C D E F G Layout: 0.1 B A ohne/ without Mutter / nut : Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread - #4-40 / # B All dimensions in mm 0.1 A Catalog E /09 Edition
84 Vertical Female Dimensional Drawing Pressfit (Clip) Leiterplatte pcb Pohlzahl No. of A B C D E F G contacts Metal plating of plated-through hole see drawing No Layout: A 0.05 B ohne/ without Mutter / nut : Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread / # B 0.05 A Dimensional Drawing Pressfit (Screw) Leiterplatte pcb Pohlzahl No. of contacts A , ,95 B C D E F G Metal plating of plated-through hole see drawing No Layout: 0.1 B A 15x ohne/ without Mutter / nut : Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread - #4-40 # B 0.1 A All dimensions in mm 82 Catalog E /09 Edition 3
85 Vertical Female 9 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 SMT 6.3 mm None Tray (48 pcs) SMT 6.3 mm None (120 pcs) SMT 6.3 mm Thread Tray (48 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Thread Tray (48 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Threaded bolt Tray (48 pcs) SMT 6.3 mm Threaded bolt (120 pcs) SMT 6.3 mm Threaded bolt Tray (48 pcs) SMT 6.3 mm Threaded bolt (120 pcs) Catalog E /09 Edition
86 Vertical Female 9 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 SMT 9.0 mm None Tray (48 pcs) SMT 9.0 mm None SMT 9.0 mm Thread Tray (48 pcs) SMT 9.0 mm Thread SMT 9.0 mm Thread Tray (48 pcs) SMT 9.0 mm Thread SMT 9.0 mm Threaded bolt Tray (48 pcs) SMT 9.0 mm Threaded bolt SMT 9.0 mm Threaded bolt Tray (48 pcs) SMT 9.0 mm Threaded bolt Catalog E /09 Edition 3
87 Vertical Female 9 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 THR 5.6 mm 2.4 mm None Clip without Tray (48 pcs) THR 5.6 mm 2.4 mm Thread Clip without Tray (48 pcs) THR 5.6 mm 2.4 mm Thread Clip without Tray (48 pcs) THR 5.6 mm 2.4 mm Threaded bolt Clip without Tray (48 pcs) THR 5.6 mm 2.4 mm Threaded bolt Clip without Tray (48 pcs) THR 6.0 mm 3.0 mm None Clip with Tray (48 pcs) THR 6.0 mm 3.0 mm None Clip without Tray (48 pcs) THR 6.0 mm 3.0 mm None Clip without THR 6.0 mm 3.0 mm Thread Clip with Tray (48 pcs) THR 6.0 mm 3.0 mm Thread Clip without Tray (48 pcs) THR 6.0 mm 3.0 mm Thread Clip without THR 6.0 mm 3.0 mm Thread Clip with Tray (48 pcs) THR 6.0 mm 3.0 mm Thread Clip without Tray (48 pcs) THR 6.0 mm 3.0 mm Thread Clip without THR 6.0 mm 3.0 mm Threaded bolt Clip with Tray (48 pcs) Catalog E /09 Edition
88 Vertical Female 9 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 THR 6.0 mm 3.0 mm Threaded bolt Clip without Tray (48 pcs) THR 6.0 mm 3.0 mm Threaded bolt Clip without THR 6.0 mm 3.0 mm Threaded bolt Clip with Tray (48 pcs) THR 6.0 mm 3.0 mm Threaded bolt Clip without Tray (48 pcs) THR 6.0 mm 3.0 mm Threaded bolt Clip without THR 6.3 mm 1.7 mm None Clip with Tray (48 pcs) THR 6.3 mm 1.7 mm None Clip without Tray (48 pcs) THR 6.3 mm 1.7 mm None Clip without THR 6.3 mm 1.7 mm Thread Clip with Tray (48 pcs) THR 6.3 mm 1.7 mm Thread Clip without Tray (48 pcs) THR 6.3 mm 1.7 mm Thread Clip without THR 6.3 mm 1.7 mm Thread Clip with Tray (48 pcs) THR 6.3 mm 1.7 mm Thread Clip without Tray (48 pcs) THR 6.3 mm 1.7 mm Thread Clip without THR 6.3 mm 1.7 mm Threaded bolt Clip with Tray (48 pcs) Catalog E /09 Edition 3
89 Vertical Female 9 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 THR 6.3 mm 1.7 mm Threaded bolt Clip without Tray (48 pcs) THR 6.3 mm 1.7 mm Threaded bolt Clip without THR 6.3 mm 1.7 mm Threaded bolt Clip with Tray (48 pcs) THR 6.3 mm 1.7 mm Threaded bolt Clip without Tray (48 pcs) THR 6.3 mm 1.7 mm Threaded bolt Clip without THR 6.3 mm 2.7 mm None Clip with Tray (48 pcs) THR 6.3 mm 2.7 mm None Clip without Tray (48 pcs) THR 6.3 mm 2.7 mm None Clip without THR 6.3 mm 2.7 mm Thread Clip with Tray (48 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (48 pcs) THR 6.3 mm 2.7 mm Thread Clip without THR 6.3 mm 2.7 mm Thread Clip with Tray (48 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (48 pcs) THR 6.3 mm 2.7 mm Thread Clip without THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (48 pcs) Catalog E /09 Edition
90 Vertical Female 9 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (48 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (48 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (48 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without THR 6.3 mm 5.3 mm None Clip with Tray (48 pcs) THR 6.3 mm 5.3 mm Thread Clip with Tray (48 pcs) THR 6.3 mm 5.3 mm Thread Clip with Tray (48 pcs) THR 6.3 mm 5.3 mm Threaded bolt Clip with Tray (48 pcs) THR 6.3 mm 5.3 mm Threaded bolt Clip with Tray (48 pcs) THR 6.3 mm 5.3 mm Threaded bolt Clip without Tray (48 pcs) THR 6.3 mm 5.3 mm Threaded bolt Clip without Catalog E /09 Edition 3
91 Vertical Female 9 Pin Solder Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 Solder 6.3 mm 2.7 mm Through Hole Screw Tray (48 pcs) mm 9 Solder 6.3 mm 2.7 mm Thread Screw Tray (48 pcs) Solder 6.3 mm 2.7 mm Thread Screw Tray (48 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (48 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (48 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (48 pcs) Solder 6.3 mm 5.3 mm Through Hole Screw Tray (48 pcs) mm 9 Solder 6.3 mm 5.3 mm Thread Screw Tray (48 pcs) Solder 6.3 mm 5.3 mm Thread Screw Tray (48 pcs) Solder 6.3 mm 5.3 mm Threaded bolt Screw Tray (48 pcs) Solder 6.3 mm 5.3 mm Threaded bolt Screw Tray (48 pcs) Solder 6.3 mm 5.3 mm Threaded bolt Screw Tray (48 pcs) Catalog E /09 Edition
92 Vertical Female 9 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 Pressfit 6.3 mm 3.0 mm Through Hole Clip Tray (48 pcs) mm 9 Pressfit 6.3 mm 3.0 mm Thread Clip Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Thread Clip Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (48 pcs) Pressfit 9.0 mm 3.0 mm Through Hole Clip Tray (48 pcs) mm 9 Pressfit 9.0 mm 3.0 mm Thread Clip Tray (48 pcs) Pressfit 9.0 mm 3.0 mm Thread Clip Tray (48 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (48 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Screw Tray (48 pcs) mm 9 Pressfit 6.3 mm 3.0 mm Thread Screw Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Thread Screw Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (48 pcs) Catalog E /09 Edition 3
93 Vertical Female 15 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 SMT 6.3 mm None Tray (36 pcs) SMT 6.3 mm None (120 pcs) SMT 6.3 mm Thread Tray (36 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Thread Tray (36 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Threaded bolt Tray (36 pcs) SMT 6.3 mm Threaded bolt (120 pcs) SMT 6.3 mm Threaded bolt Tray (36 pcs) SMT 6.3 mm Threaded bolt (120 pcs) Catalog E /09 Edition
94 Vertical Female 15 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 SMT 9.0 mm None Tray (36 pcs) SMT 9.0 mm None SMT 9.0 mm Thread Tray (36 pcs) SMT 9.0 mm Thread SMT 9.0 mm Thread Tray (36 pcs) SMT 9.0 mm Thread SMT 9.0 mm Threaded bolt Tray (36 pcs) SMT 9.0 mm Threaded bolt SMT 9.0 mm Threaded bolt Tray (36 pcs) SMT 9.0 mm Threaded bolt Catalog E /09 Edition 3
95 Vertical Female 15 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 THR 6.3 mm 1.7 mm Thread Clip without Tray (36 pcs) THR 6.3 mm 1.7 mm Threaded bolt Clip without Tray (36 pcs) THR 6.3 mm 2.7 mm None Clip with Tray (36 pcs) THR 6.3 mm 2.7 mm None Clip without Tray (36 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (36 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (36 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (36 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (36 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (36 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (36 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (36 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (36 pcs) THR 6.3 mm 5.3 mm Threaded bolt Clip with Tray (36 pcs) Catalog E /09 Edition
96 Vertical Female 15 Pin Solder Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 Solder 6.3 mm 2.7 mm Through Hole Screw Tray (36 pcs) mm 15 Solder 6.3 mm 2.7 mm Thread Screw Tray (36 pcs) Solder 6.3 mm 2.7 mm Thread Screw Tray (36 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (36 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (36 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (36 pcs) Solder 6.3 mm 5.3 mm Through Hole Screw Tray (36 pcs) mm 15 Solder 6.3 mm 5.3 mm Thread Screw Tray (36 pcs) Solder 6.3 mm 5.3 mm Thread Screw Tray (36 pcs) Solder 6.3 mm 5.3 mm Threaded bolt Screw Tray (36 pcs) Solder 6.3 mm 5.3 mm Threaded bolt Screw Tray (36 pcs) Solder 6.3 mm 5.3 mm Threaded bolt Screw Tray (36 pcs) Catalog E /09 Edition 3
97 Vertical Female 15 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 Pressfit 6.0 mm 3.3 mm None Clip Tray (36 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (36 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (36 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (36 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Clip Tray (36 pcs) mm 15 Pressfit 6.3 mm 3.0 mm Thread Clip Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Thread Clip Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (36 pcs) Catalog E /09 Edition
98 Vertical Female 15 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 Pressfit 9.0 mm 3.0 mm Through Hole Clip Tray (36 pcs) mm 15 Pressfit 9.0 mm 3.0 mm Thread Clip Tray (36 pcs) Pressfit 9.0 mm 3.0 mm Thread Clip Tray (36 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (36 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Screw Tray (36 pcs) mm 15 Pressfit 6.3 mm 3.0 mm Thread Screw Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Thread Screw Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (36 pcs) Catalog E /09 Edition 3
99 Vertical Female 25 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 25 SMT 6.3 mm None Tray (30 pcs) SMT 6.3 mm None (120 pcs) SMT 6.3 mm Thread Tray (30 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Thread Tray (30 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Threaded bolt Tray (30 pcs) SMT 6.3 mm Threaded bolt (120 pcs) SMT 6.3 mm Threaded bolt Tray (30 pcs) SMT 6.3 mm Threaded bolt (120 pcs) Catalog E /09 Edition
100 Vertical Female 25 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 25 SMT 9.0 mm None Tray (30 pcs) SMT 9.0 mm None SMT 9.0 mm Thread Tray (30 pcs) SMT 9.0 mm Thread SMT 9.0 mm Thread Tray (30 pcs) SMT 9.0 mm Thread SMT 9.0 mm Threaded bolt Tray (30 pcs) SMT 9.0 mm Threaded bolt SMT 9.0 mm Threaded bolt Tray (30 pcs) SMT 9.0 mm Threaded bolt Catalog E /09 Edition 3
101 Vertical Female 25 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 25 THR 6.3 mm 2.7 mm None Clip with Tray (30 pcs) THR 6.3 mm 2.7 mm None Clip without Tray (30 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (30 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (30 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (30 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (30 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (30 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (30 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (30 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (30 pcs) Catalog E /09 Edition
102 Vertical Female 25 Pin Solder Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 25 Solder 6.3 mm 2.7 mm Through Hole Screw Tray (30 pcs) mm 25 Solder 6.3 mm 2.7 mm Thread Screw Tray (30 pcs) Solder 6.3 mm 2.7 mm Thread Screw Tray (30 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (30 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (30 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (30 pcs) Catalog E /09 Edition 3
103 Vertical Female 25 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 25 Pressfit 6.0 mm 3.3 mm None Clip Tray (30 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (30 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (30 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (30 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Clip Tray (30 pcs) mm 25 Pressfit 6.3 mm 3.0 mm Thread Clip Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Thread Clip Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (30 pcs) Catalog E /09 Edition
104 Vertical Female 25 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 25 Pressfit 9.0 mm 3.0 mm Through Hole Clip Tray (30 pcs) mm 25 Pressfit 9.0 mm 3.0 mm Thread Clip Tray (30 pcs) Pressfit 9.0 mm 3.0 mm Thread Clip Tray (30 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (30 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Screw Tray (30 pcs) mm 25 Pressfit 6.3 mm 3.0 mm Thread Screw Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Thread Screw Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw 4-40 Tray (30 pcs) UNC 25 Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (30 pcs) Catalog E /09 Edition 3
105 Vertical Female 37 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 SMT 6.3 mm None Tray (24 pcs) SMT 6.3 mm None (120 pcs) SMT 6.3 mm Thread Tray (24 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Thread Tray (24 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Threaded bolt Tray (24 pcs) SMT 6.3 mm Threaded bolt (120 pcs) SMT 6.3 mm Threaded bolt Tray SMT 6.3 mm Threaded bolt Tape & reel Catalog E /09 Edition
106 Vertical Female 37 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 SMT 9.0 mm None Tray (24 pcs) SMT 9.0 mm None SMT 9.0 mm Thread Tray (24 pcs) SMT 9.0 mm Thread SMT 9.0 mm Thread Tray (24 pcs) SMT 9.0 mm Thread SMT 9.0 mm Threaded bolt Tray (24 pcs) SMT 9.0 mm Threaded bolt SMT 9.0 mm Threaded bolt Tray (24 pcs) SMT 9.0 mm Threaded bolt Catalog E /09 Edition 3
107 Vertical Female 37 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 THR 6.3 mm 2.7 mm None Clip with Tray (24 pcs) THR 6.3 mm 2.7 mm None Clip without Tray (24 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (24 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (24 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (24 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (24 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (24 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (24 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (24 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (24 pcs) Catalog E /09 Edition
108 Vertical Female 37 Pin Solder Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 Solder 6.3 mm 2.7 mm Through Hole Screw Tray (24 pcs) mm 37 Solder 6.3 mm 2.7 mm Thread Screw Tray (24 pcs) Solder 6.3 mm 2.7 mm Thread Screw Tray (24 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (24 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (24 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (24 pcs) Catalog E /09 Edition 3
109 Vertical Female 37 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 Pressfit 6.0 mm 3.3 mm None Clip Tray (24 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (24 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (24 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (24 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Clip Tray (24 pcs) mm 37 Pressfit 6.3 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Catalog E /09 Edition
110 Vertical Female 37 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 Pressfit 9.0 mm 3.0 mm Through Hole Clip Tray (24 pcs) mm 37 Pressfit 9.0 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 9.0 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Screw Tray (24 pcs) mm 37 Pressfit 6.3 mm 3.0 mm Thread Screw Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Thread Screw Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Catalog E /09 Edition 3
111 Vertical Female High Current Versions with machined high current contacts Dimensional Drawing 3W3, 3WK3, 5W5 and 8W8 All dimensions in mm Catalog E /09 Edition
112 Vertical Female High Current 3W3 Pressfit Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 3W3 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W3 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W3 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W3 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W3 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt 3W3 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) Cardboard (35 pcs) W3 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W3 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) Catalog E /09 Edition 3
113 Vertical Female High Current 3WK3 Pressfit Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 3WK3 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) WK3 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) WK3 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) WK3 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) WK3 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt 3WK3 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt 4-40 UNC Cardboard (35 pcs) Cardboard (35 pcs) WK3 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) WK3 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) Catalog E /09 Edition
114 Vertical Female High Current 5W5 Pressfit Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 5W5 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W5 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W5 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W5 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W5 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt 5W5 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) Cardboard (35 pcs) W5 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W5 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) Catalog E /09 Edition 3
115 Vertical Female High Current 8W8 Pressfit Versions No. of Pins Termination Current Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 8W8 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W8 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W8 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W8 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W8 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt 8W8 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) Cardboard (35 pcs) W8 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W8 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) Catalog E /09 Edition
116 Vertical Male Dimensional Drawing SMT 1,4 0,7 Ansaughaube hood 1,5 Leiterplatte pcb +0,2 A -0,4 B +0,2 16 0,6 2,8 +0,3 5,8 Y Pohlzahl No. of contacts A B C D E F G H 13,8 12,6 ±0,3 +0,2 8,25 ohne / without C ±0,1 Mutter / nut Gewinde / thread / #4-40 Bolzen / bolt 3,7 Gewinde / thread / # ,7x 45 (4x) A Pin 1 Layout: D F 1 (15x) 0,1 2,84 6,4 0,1 B ±0,05 1,8 hole / Bohrung H 3,4 F E 1,8 ±0,05 3,1 3,4 B 3,1 12,2 C ±0,05 G ±0,2 0,1 0,1 A A All dimensions in mm 114 Catalog E /09 Edition 3
117 Vertical Male Dimensional Drawing THR 3,2 +0,3 5,8 Leiterplatte pcb Ansaughaube nur bei Version 1 hood only on version 1 13,8 1 2,6 ±0, 3 +0,2 8,25 A B +0,2-0,4 +0,2 16 0,6 L Y Variante 1 version 1 Bestückung kraftlos powerless assembly Variante 2 version 2 Bestückung mit Kraft assembly with force Pohlzahl No. of contacts A B C D E F G Layout: Version 1 / 2 ohne / without C ±0,1 Mutter / nut Gewinde / thread / #4-40 Bolzen / bolt 3,7 Gewinde / thread / #4-40 0,1 B A Pin 1 +0,09 1-0,06 F D (15x) 0,1 2,84 6,4 ±0,1 3,2 G F E C ±0,05 B 0,1 A Dimensional Drawing Solder Leiterplatte pcb Pohlzahl No. of contacts A B C D E F G Layout: 0.1 B A ohne/ without Mutter / nut : Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread - #4-40 / # B All dimensions in mm 0.1 A Catalog E /09 Edition
118 Vertical Male Dimensional Drawing Pressfit (Clip) Leiterplatte pcb Pohlzahl No. of A B C D E F G contacts Metal plating of plated-through hole see drawing No Layout / Variante1 A 0.05 B ohne/ without Mutter / nut : Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread / # B 0.05 A Dimensional Drawing Pressfit (Screw) Leiterplatte pcb Pohlzahl No. of contacts A B C D E F G Metal plating of plated-through hole see drawing No Layout: 0.1 B A 15x ohne/ without Mutter / nut : Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread / #4-40 Bolzen / bolt : Gewinde / thread - #4-40 # B 0.1 A All dimensions in mm 116 Catalog E /09 Edition 3
119 Vertical Male 9 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 SMT 6.3 mm None Tray (48 pcs) SMT 6.3 mm None (120 pcs) SMT 6.3 mm Thread Tray (48 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Thread Tray (48 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Threaded bolt Tray (48 pcs) SMT 6.3 mm Threaded bolt (120 pcs) SMT 6.3 mm Threaded bolt Tray (48 pcs) SMT 6.3 mm Threaded bolt (120 pcs) Catalog E /09 Edition
120 Vertical Male 9 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 SMT 9.0 mm None Tray (48 pcs) SMT 9.0 mm None SMT 9.0 mm Thread Tray (48 pcs) SMT 9.0 mm Thread SMT 9.0 mm Thread Tray (48 pcs) SMT 9.0 mm Thread SMT 9.0 mm Threaded bolt Tray (48 pcs) SMT 9.0 mm Threaded bolt SMT 9.0 mm Threaded bolt Tray (48 pcs) SMT 9.0 mm Threaded bolt Catalog E /09 Edition 3
121 Vertical Male 9 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 THR 6.0 mm 3.0 mm None Clip with Tray (48 pcs) THR 6.0 mm 3.0 mm Thread Clip with Tray (48 pcs) THR 6.0 mm 3.0 mm Threaded bolt Clip with Tray (48 pcs) THR 6.0 mm 3.0 mm Threaded bolt Clip with Tray (48 pcs) THR 6.0 mm 3.0 mm Threaded bolt Clip with Tray (48 pcs) THR 6.3 mm 1.7 mm None Clip with Tray (48 pcs) THR 6.3 mm 1.7 mm None Clip without Tray (48 pcs) THR 6.3 mm 1.7 mm None Clip without THR 6.3 mm 1.7 mm Thread Clip with Tray (48 pcs) THR 6.3 mm 1.7 mm Thread Clip without Tray (48 pcs) THR 6.3 mm 1.7 mm Thread Clip without THR 6.3 mm 1.7 mm Thread Clip with Tray (48 pcs) THR 6.3 mm 1.7 mm Thread Clip without Tray (48 pcs) THR 6.3 mm 1.7 mm Thread 4-40 UNC Clip without THR 6.3 mm 1.7 mm Threaded bolt Clip with Tray (48 pcs) Catalog E /09 Edition
122 Vertical Male 9 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 THR 6.3 mm 1.7 mm Threaded bolt Clip without Tray (48 pcs) THR 6.3 mm 1.7 mm Threaded bolt Clip without THR 6.3 mm 1.7 mm Threaded bolt Clip with Tray (48 pcs) THR 6.3 mm 1.7 mm Threaded bolt Clip without Tray (48 pcs) THR 6.3 mm 1.7 mm Threaded bolt Clip without THR 6.3 mm 2.7 mm None Clip with Tray (48 pcs) THR 6.3 mm 2.7 mm None Clip without Tray (48 pcs) THR 6.3 mm 2.7 mm None Clip without THR 6.3 mm 2.7 mm Thread Clip with Tray (48 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (48 pcs) THR 6.3 mm 2.7 mm Thread Clip without THR 6.3 mm 2.7 mm Thread Clip with Tray (48 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (48 pcs) THR 6.3 mm 2.7 mm Thread Clip without THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (48 pcs) Catalog E /09 Edition 3
123 Vertical Male 9 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (48 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (48 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (48 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without THR 6.3 mm 5.3 mm Threaded bolt Clip with Tray (48 pcs) THR 6.3 mm 5.3 mm Threaded bolt Clip without Tray (48 pcs) THR 6.3 mm 5.3 mm Threaded bolt Clip without THR 7.0 mm 4.6 mm None Clip with Tray (48 pcs) THR 7.0 mm 4.6 mm Thread Clip with Tray (48 pcs) THR 7.0 mm 4.6 mm Thread Clip with Tray (48 pcs) THR 7.0 mm 4.6 mm Threaded bolt Clip with Tray (48 pcs) THR 7.0 mm 4.6 mm Threaded bolt Clip with Tray (48 pcs) Catalog E /09 Edition
124 Vertical Male 9 Pin Solder Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 Solder 6.3 mm 2.7 mm Threaded bolt Clip Tray (48 pcs) Solder 11.0 mm 3.1 mm None Clip Tray (48 pcs) Solder 11.0 mm 3.1 mm Thread Clip Tray (48 pcs) Solder 11.0 mm 3.1 mm Thread Clip Tray (48 pcs) Solder 11.0 mm 3.1 mm Threaded bolt Clip Tray (48 pcs) Solder 11.0 mm 3.1 mm Threaded bolt Clip Tray (48 pcs) Solder 6.3 mm 2.7 mm Through Hole Screw Tray (48 pcs) mm 9 Solder 6.3 mm 2.7 mm Thread Screw Tray (48 pcs) Solder 6.3 mm 2.7 mm Thread Screw Tray (48 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (48 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw 4-40 Tray (48 pcs) UNC 9 Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (48 pcs) Catalog E /09 Edition 3
125 Vertical Male 9 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 9 Pressfit 6.0 mm 3.3 mm None Clip Tray (48 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (48 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (48 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (48 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Clip Tray (48 pcs) mm 9 Pressfit 6.3 mm 3.0 mm Thread Clip Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Thread Clip Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (48 pcs) Catalog E /09 Edition
126 Vertical Male 9 Pin Pressfit Versions Y L No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 9 Pressfit 9.0 mm 3.0 mm Through Hole Clip Tray (48 pcs) mm 9 Pressfit 9.0 mm 3.0 mm Thread Clip Tray (48 pcs) Pressfit 9.0 mm 3.0 mm Thread Clip Tray (48 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (48 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Screw Tray (48 pcs) mm 9 Pressfit 6.3 mm 3.0 mm Thread Screw Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Thread Screw Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (48 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw 4-40 Tray (48 pcs) UNC 9 Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (48 pcs) Catalog E /09 Edition 3
127 Vertical Male 15 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 SMT 6.3 mm None Tray (36 pcs) SMT 6.3 mm None (120 pcs) SMT 6.3 mm Thread Tray (36 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Thread Tray (36 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Threaded bolt Tray (36 pcs) SMT 6.3 mm Threaded bolt (120 pcs) SMT 6.3 mm Threaded bolt Tray (36 pcs) SMT 6.3 mm Threaded bolt (120 pcs) Catalog E /09 Edition
128 Vertical Male 15 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 SMT 9.0 mm None Tray (36 pcs) SMT 9.0 mm None SMT 9.0 mm Thread Tray (36 pcs) SMT 9.0 mm Thread SMT 9.0 mm Thread Tray (36 pcs) SMT 9.0 mm Thread SMT 9.0 mm Threaded bolt Tray (36 pcs) SMT 9.0 mm Threaded bolt SMT 9.0 mm Threaded bolt Tray (36 pcs) SMT 9.0 mm Threaded bolt Catalog E /09 Edition 3
129 Vertical Male 15 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 THR 6.3 mm 2.7 mm None Clip with Tray (36 pcs) THR 6.3 mm 2.7 mm None Clip without Tray (36 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (36 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (36 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (36 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (36 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (36 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (36 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (36 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (36 pcs) THR 6.3 mm 5.3 mm None Clip without Tray (36 pcs) THR 6.3 mm 5.3 mm Thread Clip without Tray (36 pcs) THR 6.3 mm 5.3 mm Thread Clip without Tray (36 pcs) THR 6.3 mm 5.3 mm Threaded bolt Clip without Tray (36 pcs) THR 6.3 mm 5.3 mm Threaded bolt Clip without Tray (36 pcs) Catalog E /09 Edition
130 Vertical Male 15 Pin Solder Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 Solder 6.3 mm 2.7 mm Through Hole Screw Tray (36 pcs) mm 15 Solder 6.3 mm 2.7 mm Thread Screw Tray (36 pcs) Solder 6.3 mm 2.7 mm Thread Screw Tray (36 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (36 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (36 pcs) Catalog E /09 Edition 3
131 Vertical Male 15 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 Pressfit 5.6 mm 3.7 mm None Clip Tray (36 pcs) Pressfit 5.6 mm 3.7 mm Thread Clip Tray (36 pcs) Pressfit 5.6 mm 3.7 mm Thread Clip Tray (36 pcs) Pressfit 5.6 mm 3.7 mm Threaded bolt Clip Tray (36 pcs) Pressfit 5.6 mm 3.7 mm Threaded bolt Clip Tray (36 pcs) Pressfit 6.0 mm 3.3 mm None Clip Tray (36 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (36 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (36 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (36 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Clip Tray (36 pcs) mm 15 Pressfit 6.3 mm 3.0 mm Thread Clip Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Thread Clip Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (36 pcs) Catalog E /09 Edition
132 Vertical Male 15 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 15 Pressfit 9.0 mm 3.0 mm Through Hole Clip Tray (36 pcs) mm 15 Pressfit 9.0 mm 3.0 mm Thread Clip Tray (36 pcs) Pressfit 9.0 mm 3.0 mm Thread Clip Tray (36 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (36 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Screw Tray (36 pcs) mm 15 Pressfit 6.3 mm 3.0 mm Thread Screw Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Thread Screw Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (36 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (36 pcs) Catalog E /09 Edition 3
133 Vertical Male 25 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 25 SMT 6.3 mm None Tray (30 pcs) SMT 6.3 mm None (120 pcs) SMT 6.3 mm Thread Tray (30 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Thread Tray (30 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Threaded bolt Tray (30 pcs) SMT 6.3 mm Threaded bolt (120 pcs) SMT 6.3 mm Threaded bolt Tray (30 pcs) SMT 6.3 mm Threaded bolt (120 pcs) Catalog E /09 Edition
134 Vertical Male 25 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 25 SMT 9.0 mm None Tray (30 pcs) SMT 9.0 mm None SMT 9.0 mm Thread Tray (30 pcs) SMT 9.0 mm Thread SMT 9.0 mm Thread Tray (30 pcs) SMT 9.0 mm Thread SMT 9.0 mm Threaded bolt Tray (30 pcs) SMT 9.0 mm Threaded bolt SMT 9.0 mm Threaded bolt Tray (30 pcs) SMT 9.0 mm Threaded bolt Catalog E /09 Edition 3
135 Vertical Male 25 Pin THR Versions Y L No. of Pins Termination Assembly Termination Packaging Part Number Height Length Mating Side Terminal Side 25 THR 6.3 mm 2.7 mm None Clip with Tray (30 pcs) THR 6.3 mm 2.7 mm None Clip without Tray (30 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (30 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (30 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (30 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (30 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (30 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (30 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (30 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (30 pcs) THR 9.0 mm 2.6 mm None Clip without Tray (30 pcs) THR 9.0 mm 2.6 mm Thread Clip without Tray (30 pcs) THR 9.0 mm 2.6 mm Thread 4-40 Clip without Tray (30 pcs) UNC 25 THR 9.0 mm 2.6 mm Threaded bolt Clip without Tray (30 pcs) THR 9.0 mm 2.6 mm Threaded bolt Clip without Tray (30 pcs) Catalog E /09 Edition
136 Vertical Male 25 Pin Solder Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 25 Solder 6.3 mm 2.7 mm Through Hole Screw Tray (30 pcs) mm 25 Solder 6.3 mm 2.7 mm Thread Screw Tray (30 pcs) Solder 6.3 mm 2.7 mm Thread Screw Tray (30 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (30 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw 4-40 Tray (30 pcs) UNC 25 Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (30 pcs) Catalog E /09 Edition 3
137 Vertical Male 25 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 25 Pressfit 6.0 mm 3.3 mm None Clip Tray (30 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (30 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (30 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (30 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Clip Tray (30 pcs) mm 25 Pressfit 6.3 mm 3.0 mm Thread Clip Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Thread Clip Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (30 pcs) Catalog E /09 Edition
138 Vertical Male 25 Pin Pressfit versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 25 Pressfit 9.0 mm 3.0 mm Through Hole Clip Tray (30 pcs) mm 25 Pressfit 9.0 mm 3.0 mm Thread Clip Tray (30 pcs) Pressfit 9.0 mm 3.0 mm Thread Clip Tray (30 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (30 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Screw Tray (30 pcs) mm 25 Pressfit 6.3 mm 3.0 mm Thread Screw Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Thread Screw Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (30 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (30 pcs) Catalog E /09 Edition 3
139 Vertical Male 37 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 SMT 6.3 mm None Tray (24 pcs) SMT 6.3 mm None (120 pcs) SMT 6.3 mm Thread Tray (24 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Thread Tray (24 pcs) SMT 6.3 mm Thread (120 pcs) SMT 6.3 mm Threaded bolt Tray (24 pcs) SMT 6.3 mm Threaded bolt (120 pcs) SMT 6.3 mm Threaded bolt Tray (24 pcs) SMT 6.3 mm Threaded bolt (120 pcs) Catalog E /09 Edition
140 Vertical Male 37 Pin SMT Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 SMT 9.0 mm None Tray (24 pcs) SMT 9.0 mm None SMT 9.0 mm Thread Tray (24 pcs) SMT 9.0 mm Thread SMT 9.0 mm Thread Tray (24 pcs) SMT 9.0 mm Thread SMT 9.0 mm Threaded bolt Tray (24 pcs) SMT 9.0 mm Threaded bolt SMT 9.0 mm Threaded bolt Tray (24 pcs) SMT 9.0 mm Threaded bolt Catalog E /09 Edition 3
141 Vertical Male 37 Pin THR Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 THR 6.3 mm 2.7 mm None Clip with Tray (24 pcs) THR 6.3 mm 2.7 mm None Clip without Tray (24 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (24 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (24 pcs) THR 6.3 mm 2.7 mm Thread Clip with Tray (24 pcs) THR 6.3 mm 2.7 mm Thread Clip without Tray (24 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (24 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (24 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip with Tray (24 pcs) THR 6.3 mm 2.7 mm Threaded bolt Clip without Tray (24 pcs) Catalog E /09 Edition
142 Vertical Male 37 Pin Solder Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 Solder 6.3 mm 2.7 mm Through Hole Screw Tray (24 pcs) mm 37 Solder 6.3 mm 2.7 mm Thread Screw Tray (24 pcs) Solder 6.3 mm 2.7 mm Thread Screw Tray (24 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (24 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (24 pcs) Solder 6.3 mm 2.7 mm Threaded bolt Screw Tray (24 pcs) Catalog E /09 Edition 3
143 Vertical Male 37 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 Pressfit 6.0 mm 3.3 mm None Clip Tray (24 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (24 pcs) Pressfit 6.0 mm 3.3 mm Thread Clip Tray (24 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (24 pcs) Pressfit 6.0 mm 3.3 mm Threaded bolt Clip Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Clip Tray (24 pcs) mm 37 Pressfit 6.3 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Catalog E /09 Edition
144 Vertical Male 37 Pin Pressfit Versions Y L No. of Pins Termination Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 37 Pressfit 9.0 mm 3.0 mm Through Hole Clip Tray (24 pcs) mm 37 Pressfit 9.0 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 9.0 mm 3.0 mm Thread Clip Tray (24 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 9.0 mm 3.0 mm Threaded bolt Clip Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Through Hole Screw Tray (24 pcs) mm 37 Pressfit 6.3 mm 3.0 mm Thread Screw Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Thread Screw 4-40 Tray (24 pcs) UNC 37 Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Pressfit 6.3 mm 3.0 mm Threaded bolt Screw Tray (24 pcs) Catalog E /09 Edition 3
145 Verticall Male High Current Versions with stamped high current contacts Dimensional Drawing 5W5 All dimensions in mm Catalog E /09 Edition
146 Verticall Male High Current Dimensional Drawing 8W8 All dimensions in mm 144 Catalog E /09 Edition 3
147 Vertical Male High Current 5W5/8W8 Y L No. of Pins Termination Current Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 5W5 Pressfit 6.9 mm 3.2 mm Threaded bolt Clip Tray (30 pcs) W8 Pressfit 6.9 mm 3.2 mm Threaded bolt Clip Tray (24 pcs) Catalog E /09 Edition
148 Vertical Male High Current Versions with machined high current contacts Dimensional Drawing 3W3, 3WK3, 5W5 and 8W8 All dimensions in mm 146 Catalog E /09 Edition 3
149 Vertical Male High Current 3W3 Y L No. of Pins Termination Current Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 3W3 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W3 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W3 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W3 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W3 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt 3W3 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) Cardboard (35 pcs) W3 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W3 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) Catalog E /09 Edition
150 Vertical Male High Current 3WK3 Y L No. of Pins Termination Current Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 3WK3 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) WK3 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) WK3 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) WK3 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) WK3 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt 3WK3 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) Cardboard (35 pcs) WK3 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) WK3 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) Catalog E /09 Edition 3
151 Vertical Male High Current 5W5 Y L No. of Pins Termination Current Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 5W5 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W5 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W5 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W5 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W5 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt 5W5 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) Cardboard (35 pcs) W5 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W5 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) Catalog E /09 Edition
152 Vertical Male High Current 8W8 Y L No. of Pins Termination Current Assembly Height Termination Length Mating Side Terminal Side Packaging Part Number 8W8 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W8 Pressfit 30 A 6.3 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) W8 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W8 Pressfit 30 A 6.3 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W8 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt 8W8 Pressfit 30 A 9.0 mm 3.2 mm Pressfit bolt Cardboard (35 pcs) Cardboard (35 pcs) W8 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) W8 Pressfit 30 A 9.0 mm 3.2 mm Threaded bolt Pressfit bolt Cardboard (35 pcs) Catalog E /09 Edition 3
153 Female and Male Connectors with Solder Cups Suitable for solid and stranded wires AWG 18 Dimensional Drawing Female Connectors All dimensions in mm Catalog E /09 Edition
154 Female and Male Connectors with Solder Cups Dimensional Drawing Male Connector All dimensions in mm 152 Catalog E /09 Edition 3
155 Female and Male Connectors with Solder Cups Female Connectors No. of Pins Termination Termination Packaging Part Number Length Mating Side Terminal Side 9 Hand solder 2.5 mm Through hole Cardboard (45 pcs) Hand solder 2.5 mm Through hole Cardboard (45 pcs) Hand solder 2.5 mm Through hole Cardboard (45 pcs) Hand solder 2.5 mm Through hole Cardboard (45 pcs) Male Connectors No. of Pins Termination Termination Packaging Part Number Length Mating Side Terminal Side 9 Hand solder 3.2 mm Through hole Cardboard (45 pcs) Hand solder 3.2 mm Through hole Cardboard (45 pcs) Hand solder 3.2 mm Through hole Cardboard (45 pcs) Hand solder 3.2 mm Through hole Cardboard (45 pcs) Catalog E /09 Edition
156 Female and Male Connectors for Flat Ribbon Cables Suitable for IDC flat ribbon cables with pitch of 1.27 mm (0.05") and AWG 26 solid wire or AWG 28 stranded wire Suitable for ERNI KSG 185 Dimensional Drawing Female Connectors Dimensional Drawing Male Connectors All dimensions in mm 154 Catalog E /09 Edition 3
157 Female and Male Connectors for Flat Ribbon Cables Female Connectors No. of Pins Termination Packaging Part Number Mating Side Terminal Side 9 IDC Through hole Cardboard (84 pcs) IDC Through hole Cardboard ( 70 pcs) IDC Through hole Cardboard (56 pcs) IDC Through hole Cardboard (42 pcs) Male Connectors No. of Pins Termination Packaging Part Number Mating Side Terminal Side 9 IDC Through hole Cardboard (84 pcs) IDC Through hole Cardboard ( 70 pcs) IDC Through hole Cardboard (56 pcs) IDC Through hole Cardboard (42 pcs) Accessories for Male and Female Connectors No. of Pins Configuration Part Number 9 Strain Relief for D-Sub Male and Female Connectors Strain Relief for D-Sub Male and Female Connectors Strain Relief for D-Sub Male and Female Connectors Strain Relief for D-Sub Male and Female Connectors Application Tooling Configuration Part Number Hand tool with various accessories (complete set in a case) Catalog E /09 Edition
158 Female and Male Connectors for Discrete Wire IDC Suitable for discrete wires in AWG Suitable for use with ERNI KSG 200 Contacts removable or replaceable Dimensinal Drawing Female Connectors Dimensional Drawing Male Connectors All dimensions in mm 156 Catalog E /09 Edition 3
159 Female and Male Connectors for Discrete Wire IDC Female Connectors No. of Pins Termination Packaging Part Number Mating Side Terminal Side 9 IDC/AWG None Tray (60 pcs) IDC/AWG None Tray (50 pcs) IDC/AWG None Tray (40 pcs) IDC/AWG None Tray (30 pcs) Male Connectors No. of Pins Termination Packaging Part Number Mating Side Terminal Side 9 IDC/AWG None Tray (60 pcs) IDC/AWG None Tray (50 pcs) IDC/AWG None Tray (40 pcs) IDC/AWG None Tray (30 pcs) Application Tooling No. of Pins Part Number Standard Hand Crimp Tool Automatic Hand Crimp Tool Tool support (for mounting on table) Extraction Tool Catalog E /09 Edition
160 Female and Male Connectors for Crimp Snap-in Technique Suitable for use with ERNI KSG 183, 185 and 200 Cable Housing Crimp contacts AWG Dimensional Drawing Female Connectors Dimensional Drawing Male Connectors All dimensions in mm 158 Catalog E /09 Edition 3
161 Female and Male Connectors for Crimp Snap-in Technique Female Connector Housings No. of Pins Termination Mating Side Terminal Side Part Number 9 Crimp Snap-In Through hole Crimp Snap-In Through hole Crimp Snap-In Through hole Crimp Snap-In Through hole Male Connector Housings No. of Pins Termination Mating Side Terminal Side Part Number 9 Crimp Snap-In Through hole Crimp Snap-In Through hole Crimp Snap-In Through hole Crimp Snap-In Through hole Catalog E /09 Edition
162 Female and Male Connectors for Crimp Snap-in Technique Crimp Contacts for Female Connectors Cable Diameter Configuration Packaging Part Number AWG AWG AWG AWG AWG AWG Crimp Contact Bag (100 pcs) Crimp Contact Bag (100 pcs) Crimp Contact Reel (500 pcs) Crimp Contact Reel (500 pcs) Crimp Contact Reel ( pcs) Crimp Contact Reel ( pcs) Crimp Contacts for Male Connectors Cable Diameter Configuration Packaging Part Number AWG AWG AWG AWG AWG AWG Crimp Contact Bag (100 pcs) Crimp Contact Bag (100 pcs) Crimp Contact Reel (500 pcs) Crimp Contact Reel (500 pcs) Crimp Contact Reel ( pcs) Crimp Contact Reel ( pcs) Application Tooling Configuration Part Number Hand Crimp Tool for Loose Contacts AWG Hand Crimp Tool for Reels with 500 Contacts (incl. reel holder and adjustable feed) AWG Mounting and Dismounting Tool for AWG Catalog E /09 Edition 3
163 Housings for Female High Current Contacts Suitable for ERNI KSG 183, 185 and 200 Cable Housing Dimensional Drawing 3W3 Dimensional Drawing 3WK3 All dimensions in mm Catalog E /09 Edition
164 Housings for Female High Current Contacts Dimensional Drawing 5W5 Dimensional Drawing 8W8 Alle dimensions in mm 162 Catalog E /09 Edition 3
165 Housings for Female Power Contacts No. of Pins Mating Side Terminal Side Part Number 3W3 Through hole WK3 Through hole W5 Through hole W8 Through hole Female High Current Contacts for Handsolder No. of Pins Termination Cable Type Current Part Number Hand solder AWG A Hand solder AWG A Hand solder AWG A Female High Current Crimp Contacts No. of Pins Termination Cable Type Current Part Number Crimp AWG A Crimp AWG A Crimp AWG A Application Tooling Configuration Part Number Hand crimp tool Extraction tool Jacket if needed for replacement (for extraction tool) Catalog E /09 Edition
166 Housings for Male High Current Contacts Suitable for ERNI KSG 183, 185 and 200 Cable Housing Dimensional Drawing 3W3 Dimensional Drawing 3WK3 All dimensions in mm 164 Catalog E /09 Edition 3
Connectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
More information06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
More informationHARTING. Interface Connectors. People Power Partnership
11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More informationCONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More informationDirectory chapter 01
Directory chapter 01 Miniature D connectors, 1.27 mm pitch Page I/O connectors................................................. 01.02 Pin and socket Technical characteristics........................................
More informationDirectory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationDirectory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
More informationHan K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationData sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC
More informationData sheet. E-DAT Industry RJ45 field plug PROFINET. Illustrations P/N PI EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification multi-port Cat.5 plug to be assembled in the field 100 MBit suitable according to IEEE
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More information3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810
1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9
More informationAmphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
More informationSHIELDED CABLE CONNECTOR (RECEPTACLE)
1 of 105 G SHIELDED CABLE CONNECTOR (RECEPTACLE) 72861-x01LF, 53389-x01LF 72862-x01LF 10008166-x01LF 2X4 SIGNAL HM1C16D2J110EBLF 72817-xyzLF 72817-xyzLF 4X6 SIGNAL 10013881-x01L, 10013881-x31LF 10074494-x31LF
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationSERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
More informationFISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationOur Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
More informationAPPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
More informationSurface Mount Terminal Blocks. 120-M-221-SMD 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5
page 1/5 Surface Mount Terminal Blocks 120-M-221-SMD 5.00 mm (0.197 in) Spacing - 2-24 poles PICTURES 120-M-221-SMD 120-M-221-SMD & 120-D-111 TECHNICAL INFORMATION Description US Patent # 7,207,811 B2
More informationRT Product Details
TE Connectivity My Cart My Part Lists Sign In/Register English (Change) What can we help you find? Products Industries Resources About TE My Account Innovation Support Center RT314024 Product Details Share
More informationI/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
More informationSurface Mount Terminal Blocks. 930-D-SMD (-DS) 3.50 mm (0.138 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 930-D-SMD-DS
page 1/5 Surface Mount Terminal Blocks 930-D-SMD (-DS) 3.50 mm (0.138 in) Spacing - 2-12 poles PICTURES 930-D-SMD-DS TECHNICAL INFORMATION Description The floating terminal contacts ensure total co-planar
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationK CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationDatasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
More informationGeneral Purpose Low Power PCB Relays
Power PCB Relay RT2 DC and AC (for global markets) n 2 pole 8A, 2 form C (CO) or 2 form A (NO) contacts n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature up to 85 C n
More informationZ b. General Purpose Relays PCB Relays SCHRACK. Power PCB Relay RT1
Power PCB Relay RT1 n 1 pole 12A/16A, 1 form C (CO) or n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85 C (DC coil) n WG version: product in accordance to IEC 60335-1
More informationCSF - CSM CONNECTORS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green
- CSM Functional characteristics Dimensional class: low 0 RoHS 2011/65/EU Standard colour: green Dimensions: 14 x 11.5 mm (.551 x.453 in) 10 20 30 mm ½ 1 in Max approved wire size: solid: 2.5 mm 2 (IMQ);
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationSurface Mount Terminal Blocks. 950-D-SMD-DS 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 950-D-SMD-DS
page 1/5 Surface Mount Terminal Blocks 950-D-SMD-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-D-SMD-DS TECHNICAL INFORMATION Description 5 mm spacing, surface mount adapted terminal block for
More informationThrough Hole Connectors
Through Hole Connectors 43 Whether your Through-Hole Technology applications require a Quick Disconnect Tab, an Insulation Displacement Connector, a Test Point Terminal, a Screw Terminal, a Receptacle,
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationDielectric withstanding voltage Contact resistance
Modular Connectors MOD series Modular Connectors Outline MOD series connectors comply with FCC and NTT standards, allowing them to be used for international products. Features Because these connectors
More informationSurface Mount Terminal Blocks. 971-SLR-THR 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 971-SLR-THR
page 1/5 Surface Mount Terminal Blocks 971-SLR-THR 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 971-SLR-THR TECHNICAL INFORMATION Description Standoffs underneath the molding prevent bottom of molding
More informationData sheet E-DAT modul Cat.6 A 8(8) jack, T568A
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular termination unit Cat.6 A, RJ45 component testing for Cat.6 A to ISO/IEC 11801
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationData sheet. E-DAT modul Cat.6A 8(8) jack, T568A. Illustrations P/N I EAN Product specification. Page 1/
Page 1/9 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification modular termination unit Cat.6A, RJ45 component testing for Cat.6A to ISO/IEC 11801
More informationM Series Pin and Socket Connectors Catalog Revised 3-01
M Series Connectors Product Facts Most connectors intermateable with connectors made to MIL-C-28748 requirements Wide range of connector styles and sizes: standard c o n n e c t o r s (unloaded), posted
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CTF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.1 x 15.5 mm
More informationAutomotive Relays PCB Single Relays. Micro Relay K (THT THR)
Micro Relay K (THT THR) Small power relay Limiting continuous current at 8 C Low weight Low noise operation Wave (THT) and reflow (THR/pin-in-paste) solderable versions Typical applications Door lock,
More information- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
More informationSurface Mount Terminal Blocks. 971-SLR-SMD mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 971-SLR-SMD-1.
page 1/5 Surface Mount Terminal Blocks 971-SLR-SMD-1.1 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 971-SLR-SMD-1.1 TECHNICAL INFORMATION Description US Patent # 6.224.399 B1 Canadian Patent # 2,307,922
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationCONEC SnapLock. 1 Introduction
CONEC SnapLock 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional screwing. A spring-loaded clip integrated
More informationHan-Power Energy Bus Components
HARTING Electric Han-Power Energy Bus Components People Power Partnership Han Data Sheet 0080-7 Han-Power T Han-Power T Part-Number Drawing Dimensions in mm 09 12 008 4701 Cable gland please order separately
More information3M CP2 Press-Fit Headers and Sockets, 2 mm
1 of 7 3M CP2 Press-Fit Headers and Sockets, 2 mm A-Style CP2 Connectors CP2-SA110-G1-KR Right Angle Socket Connectors mated to CP2-HA110-GA1-KR Header Connectors 78-5102-0083-1 Revised Date: February
More informationMD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
More informationI Non-magnetic D-Sub Connectors
Non magnetic D-Sub Connectors Section I Non-magnetic D-Sub Connectors 5 Non magnetic D-Sub Contents Non magnetic D-Sub Connectors Cross reference table for ESA/SCC/SOURIAU/GSFC...7 Quality Assurance Testing...7
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CCF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 25.4 x 14.9
More informationPCB plug-in connectors
Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating
More informationData sheet. E-DAT modul Cat.6A 8(8) jack, T568A. Illustrations P/N I EAN Product specification. Page 1/
Page 1/9 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification modular termination unit Cat.6A, RJ45 component testing for Cat.6A to ISO/IEC 11801
More information0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
More informationAdapting Press-Fit Connection Technology for Electronic Modules in Harsh Environments.
Adapting Press-Fit Connection Technology for Electronic Modules in Harsh Environments. By Joseph Lynch Director of Advanced Product Engineering Interplex Industries Inc, USA. Andy Longford Consultant PandA
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationSL-SMT Pitch 3.81 NEW. Data Sheet PCB Products. PCB Connectors SL-SMT 3.81/SL 3.81 BL 3.81
NEW SL-SMT itch 3.81 Data Sheet CB roducts CB Connectors SL-SMT 3.81/SL 3.81 BL 3.81 The 3.81 mm (0.51 inch) pitch connector system extends the selection of connectors available to the designer in the
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationKVBS Reverse bayonet connectors for railway applications
Reverse bayonet connectors for railway applications KVBS connector series derives from the RF CVBS one and it is based on Mil-DTL-5015 and VG95234 specs. The most important advantages are the simpler and
More informationEPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
More informationMICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CIF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 18.4 x 15.5
More informationPowermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
More information0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationEye Of SOLDERLESS INTERCONNECT TECHNOLOGY GUIDELINE. the Needle
EON Pressfit Eye Of SOLDERLESS INTERCONNECT TECHNOLOGY the Needle GUIDELINE ME DOCPAGEAPAGE.indd 2 22/6/217 11:14:49 SOLDERLESS INTERCONNECT TECHNOLOGY EON Pressfit Eye Of the Needle As a connection, Pressfit
More informationSPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SINGLE ROW DOUBLE ROW SLC
More informationSMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
More informationORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
More informationÌ Tripolarized mating
- IDC Page Discrete IDC D-Subminiature... 1675 High Density IDC 0.025" Cable Pitch... 1657 Discrete PCB Mounted IDC... 1674 High Density IDC 0.033" Cable Pitch... 1658 Distribution Systems... 1682 IDT
More informationMateable transfer wiring-system
Mateable transfer wiring-system for connectors to DIN 41 612 and VG 5 324 1 ERNI Elektroapparate GmbH D-730 Adelberg -a- ++4-7166-500 7 27 75 Telefax: ++4-7166-50 282 1.12 Table of contents Cable housings
More information38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
More informationHigh Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
More informationData sheet E-DAT modul 24x8(8) 1RU patch panel Cat.6 A, stainless steel
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU stainless steel module frame with 24 individual "E-DAT modul" modules component
More informationR Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
More informationAMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
More informationMulti-Pole Rectangular Connectors Specifications Table
Multi-Pole Rectangular Connectors Specifications Table Multi-Pole Rectangular Connectors Specifications Table Number of Poles Rating Insulation Resistance Dielectric Strength Contact Resistance Insertion
More informationInterconnection Solution Guide. Durability Gold Flash 75 cycles 15µ Gold 125 cycles 30µ Gold 250 cycles Full gold flash 75 cycles
D Amphenol G17 DSub Connector Right Angle PCB Mount Through-hole DSub connectors male and female. Board-locks P/B DSub R/A PCB CONNECTOR Through Hole 2.54mm pitch PC board layout Page D-3 DSub Accessories
More informationData sheet C6 A modul 24 port 180 M 1RU stainless steel
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU stainless steel module frame with 24 individual modules C6modul 180 certified to
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationFISCHER ULTIMATE TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES
H CHAPTER PAGES FISCHER TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES IP68 to -0m / IP69 / Hermetic 60 EMC shielding High corrosion resistance 0,000 mating cycles H - FISCHER TM SERIES Table of contents
More informationUltra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
More informationData sheet E-DAT modul 1 port UPk Cat.6 A, pure white
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification termination unit with E-DAT modul for mounting in cable duct component testing for Cat.6
More informationLDG-S. Busable Enclosures for DIN-rails. Installation widths 22.5 mm and 45 mm
LDG-S Busable Enclosures for DIN-rails Installation widths 22. mm and 4 mm General The LDG-S serie of enclosures are fully insulated enclosures according to the specifications of the machinery and the
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More informationAmphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
More informationMini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
More informationWaterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
More informationPPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
More informationRoHS 2002/95/EC GREEN ELECTRONICS CRM. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS CONNECTORS
More informationFeatures/Benefits. Typical Applications
Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with or without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials
More informationSurface Mount Terminal Blocks. 971-SLK-THR 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION APROVAL INFORMATION.
page 1/5 Surface Mount Terminal Blocks 971-SLK-THR 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 971-SLK-THR 971-SLK-THR & 950-HAF-DS TECHNICAL INFORMATION Description Pinstrip Typical application Technical
More informationDT04 08P + W8P
Deutsch Connector Assortment Flip Kit *763354 This assortment contains 574 pieces/sets of widely used Deutsch Connectors. Flip Kits are handy both in the shop and the service vehicle. They are portable,
More information