Dielectric withstanding voltage Contact resistance

Size: px
Start display at page:

Download "Dielectric withstanding voltage Contact resistance"

Transcription

1 Modular Connectors MOD series Modular Connectors Outline MOD series connectors comply with FCC and NTT standards, allowing them to be used for international products. Features Because these connectors are designed as smaller-sized and light-weight connectors, they are suitable for high density equipment with limited space. The contact plating is gold plate, ensuring that the connectors provide high reliability and secure contact. Through- and crimping type jacks are available. Ensures secure connectors with screw locks in the fit state, and fixed strength. Provides EMI-filtered countermeasure products. Principal Applications PDA, Modem, TA, factory automation (FA) equipment, industrial cameras, various electronic devices Electrical Characteristics Rated voltage Rated current Insulation resistance Dielectric withstanding voltage Contact resistance 125V AC (r.m.s.).5 to 1.5 A (Jack) Over 1 megohms at 1V DC 5V AC (r.m.s.) 2 to 6 milliohms or less Document Disclaimer When placing orders with us, minimum order quantities are set for every product. Be sure to contact us before starting preliminary design of PCBs using our connectors. The specifications and information shown in the catalog are subject to change without notice.

2 Reflow temperature profile (for reference purposes) ( C) 25 Peak: C 23 C or more Flow temperature profile (for reference purposes) 26±5 C 5sec Temperture C 15 C Preheating Zone 9±3s 3±1s Soldering Zone 1~13 C 3~6sec 5 Heating time The reflow temperature profile shown in this drawing is for reference purposes. This profile depends on requirements such as reflow equipment, soldering paste, and PCB size. Thus, this profile may not meet with your specific situation. Please evaluate your PCB-mounting soldering and set your own reflow temperature profile. ΩApplicable products MOD-J88YA( )A+ MOD-SJ88YA( )A+ MOD-J88YA2E+ MOD-YSJ88YA3C+ The flow temperature profile as shown above is for reference purposes. This profile depends on requirements such as the PCB size. Thus, this profile may not meet with your specific situation. Please evaluate your PCB-mounting soldering and set your own flow temperature profile. ΩApplicable products MOD-J4( )DA( )A+ MOD-J6( )DA( )A+ MOD-J6( )DA( )B+ MOD-J88DA12A+ MOD-SJ88DA2D( )+ MOD-SJ88DA2B+ MOD-YSJ88D3C+ The profile shown in this drawing is applicable only for those products shown above. The profile shown in this drawing is applicable only for those products shown above.

3 Product List Right-angle through type MOD-J4( )DA( )A+ Right-angle through type MOD-J6( )DA( )A+ Right-angle through type MOD-J6( )DA( )B+ Cap for Jack MOD-6C( ) E-6MOD MOD series...4 E-7MOD MOD series...5 E-8MOD MOD series...6 E-9MOD MOD series...7 Right-angle through type MOD-J88DA12A+ E-1MOD MOD series...8 Right-angle SMT type MOD-J88YA( )A+ E-11MOD MOD series...9 Right-angle SMT type MOD-SJ88YA( )A+ E-12MOD MOD series...1 Right-angle through type (With ferrite core) MOD-SJ88DA2D( )+ E-13MOD MOD series...11 Right-angle through type MOD-SJ88DA2B+ E-14MOD MOD series...12 Right-angle SMT type MOD-J88YA2E+ E-15MOD MOD series...13 Right-angle SMT type s MOD-SJ88YA2B3+ E-16MOD MOD series...14 Right-angle RJ45 modular jack with cables for panels MOD-J88W22-AS( )+ E-17MOD MOD series...15 Right-angle R11 modular jack with cables for panels MOD-J62W22-AS( )+ E-18MOD MOD series...16 Straight through type MOD-YSJ88D3C+ E-19MOD MOD series...17 Right-angle SMT type MOD-YSJ88YA3C+ E-2MOD MOD series...18 Modular plug MOD-YSP88P3+ E-21MOD MOD series...19

4 Right-angle through type MOD-J4( )DA( )A+ For PCB Right-angle Through FCC Standard MOD- J 4 ( ) DA ( )A+ ➀ ➁ ➂ ➃ ➄ ➅ Series name Jack Opening size: For 4 contacts No. of contacts 2: 4-2 Jack 4: 4-4 Jack Type of contact Right-angle through type Contact plating 3: Min..3 μm Gold plate 1: Min. 1. μm Gold plate ø.46 2-ø ± ± ± ø.8 ±.5 Edge of jack 2.54 ± ± Contacts Insulator Mating connectors: 4-4 modular plug Through SMT Press-in IDC Soldering Crimping wrapping

5 Right-angle through type MOD-J6( )DA( )A+ For PCB Right-angle Through FCC Standard MOD- J 6 ( ) DA ( )A+ ➀ ➁ ➂ ➃ ➄ ➅ Series name Jack Opening size: For 6 contacts No. of contacts 2: 6-2 Jack 4: 6-4 Jack 6: 6-6 Jack Type of contact Right-angle through type Contact plating 3: Min..3 μm Gold plate 1: Min. 1. μm Gold plate ø.46 2-ø ± ± ± ±.5 6-ø-.8 ±.5 Edge of jack 2.54 ± ± Contacts Insulator Mating connectors: 6-2, 6-4, 6-6 modular plug Accessory: Cap: MOD-6C( ) wrapping Crimping Soldering IDC Press-in SMT Through

6 Right-angle through type MOD-J6( )DA( )B+ For PCB Right-angle Through FCC Standard MOD- J 6 ( ) DA ( )B+ ➀ ➁ ➂ ➃ ➄ ➅ Series name Jack Opening size: For 6 contacts No. of contacts 2: 6-2 Jack 4: 6-4 Jack 6: 6-6 Jack Type of contact Right-angle through type Contact plating 3: Min..3 μm Gold plate 1: Min. 1. μm Gold plate ø ±.5 6-ø.8 ± ±.5 2-ø ± ± ±.5 Edge of jack 12 ±.5 Contacts Insulator Mating connectors: 6-2, 6-4, 6-6 modular plug Accessory: Cap: MOD-6C( ) Through SMT Press-in IDC Soldering Crimping wrapping

7 Cap for Jack MOD-6C( ) Accessorys Cap MOD- 6C ( ) ➀ ➁ ➂ Series name Cap for 6 contacts Externals size Y X Dimensions Part No. X MOD-6C2 MOD-6C2A 15.8 MOD-6C Y Mating connectors: 6-2, 6-4, 6-6 Caps for Jac wrapping Crimping Soldering IDC Press-in SMT Through

8 Right-angle through type MOD-J88DA12A+ For PCB Right-angle Through IEC, FCC MOD MOD MOD MOD- J88 DA 12 A+ ➀ ➁ ➂ ➃ Series name 8-8 Jack Type of contact Right-angle through type Contact plating Min μm Gold plate = =8.89 ± ±.5 ø ±.5 ø Contacts Insulator 2.54 ± ± Edge of jack Mating connectors: 8-8 modular plug Through SMT Press-in IDC Soldering Crimping wrapping

9 Right-angle SMT type MOD-J88YA( )A+ For PCB Right-angle SMT FCC MOD- J88 YA ( )A+ ➀ ➁ ➂ ➃ Series name 8-8 Jack Type of contact Right-angle SMT type Contact plating 2: Min..2 μm Gold plate 7: Min..76 μm Gold plate 12: Min μm Gold plate 22 REF ø Contacts Hold down Insulator ø ±.1 4-R1.4 Pattern 1.2 ± ± REF ø2.5 ± ± Mating connectors: 8-8 modular plug wrapping Crimping Soldering IDC Press-in SMT Through

10 Right-angle SMT type MOD-SJ88YA( )A+ For PCB Right-angle SMT FCC MOD- SJ88 YA ( ) A+ ➀ ➁ ➂ ➃ Series name 8-8 Jack with shield Type of contact Right-angle SMT type Contact plating 2: Min..2 μm Gold plate 7: Min..76 μm Gold plate 12: Min μm Gold plate 22.2 REF ø Contacts Insulator Shield ø ±.1 ø2.5 ±.5 4-R1.4 Pattern 1.2 ± ± REF ± Mating connectors: 8-8 modular plug Through SMT Press-in IDC Soldering Crimping wrapping

11 Right-angle through type (With ferrite core) MOD-SJ88DA2D( )+ For PCB Right-angle Through ISO 1173 MOD- SJ88 DA 2 D( )+ Series name 8-8 Jack with shield (ISO1173) Type of contact Right-angle through type Contact plating: Min..2 μm Gold plate Ferrite core Blank: Provided 1 : None Insulator Contacts Shell Ferrite core REF ±.5 6 ±.5 2 ±.5 6 ± ± ± ± ± ± ± ±.5.6 ± ± ±.5 4-R.3 Edge of connector Mating connectors: 8-8 modular plug (ISO1173) wrapping Crimping Soldering IDC Press-in SMT Through

12 Right-angle through type MOD-SJ88DA2B+ For PCB Right-angle Through IEC, FCC MOD- SJ88 DA 2B+ ➀ ➁ ➂ ➃ Series name 8-8 Jack with shield Type of contact Right-angle through type Contact plating: Min..2 μm Gold plate Groove part POS.# = POS.# ±.5 4-R.3 ± ± ±.5 POS.#8 Contacts Insulator Shield.6 ± ±.5 POS.#1 POS.#2 3.1MAX ± ± =7.14 ±.5 Mating connectors: 8-8 modular plug 8-8 modular plug (With shield) Through SMT Press-in IDC Soldering Crimping wrapping

13 Right-angle SMT type MOD-J88YA2E+ For PCB Right-angle SMT ISO 1173 MOD- J88 YA 2 E+ ➀ ➁ ➂ ➃ Series name 8-8 Jack (ISO 1173) Type of contact Right-angle SMT type Contact plating: Min..2 μm Gold plate (SMT lead size) REF ± Insulator Contacts Hold down 1.75 ± ±.1 6 ±.1 Edge of connector.6 ± ± ± ± ±.2 Mating connectors: 8-8 modular plug (ISO 1173) wrapping Crimping Soldering IDC Press-in SMT Through

14 Right-angle RJ45 modular jack with cables for panels MOD-J88W22-AS( )+ For panels Right-angle, with cables Misinsertion prevention, FCC Standard MOD- J88 W22- AS( )+ ➀ ➁ ➂ ➃ ➀ Series name ➁ 8-8 jack ➂ Misinsertion prevention, crimping type ➃ Cable length (14) 4.5 min. (11.3) 1.2 min Recommended panel layout.6 11 L Terminal strip ➀ Insulator A ➁ Insulator B ➂ Contacts ➃ Contacts ➄ Misinsertion prevention lever ➅ Misinsertion prevention Key ➆ Cable A Mating connectors: 8-8 plug wrapping Crimping Soldering IDC Press-in SMT Through

15 Right-angle R11 modular jack with cables for panels MOD-J62W22-AS( )+ For panels Right-angle, with cables FCC Standard MOD MOD MOD MOD- J62 W22- AS( )+ ➀ ➁ ➂ ➃ ➀ Series name ➁ 6-2 jack ➂ Misinsertion prevention, crimping type ➃ Cable length (Note 1) 11.9 (11) Terminal strip L ➀ Insulator A ➁ Insulator B ➂ Contacts ➃ Contacts ➄ Cable A 5 1 Mating connectors: 6-2 plug Through SMT Press-in IDC Soldering Crimping wrapping

16 Straight through type MOD-YSJ88D3C+ For panel (Screw lock) Straight through For RJ-45 MOD- YSJ88 D3C+ ➀ ➁ ➂ Series name 8-8 Jack with shield Straight through type REF ø HONDA 1 REF. POS. #8 POS. #1 5.7 REF REF REF. Contacts Shell Insulator Nuts Screw lock 4-R R MIN. 2 ±.5 7.4MIN. 6.25MIN. Recommended panel mounting- layout t=1.2mm~1.6mm The lock screw is appended ±.5 8-ø.8 ±.5 11 ±.5 7 ±.5 POS. # R ± ± ± ±.1 t=1mm~1.6mm 2-ø POS. #1 POS. #2 Mating connectors: Assembly of MOD-YSP88P3C+ use wrapping Crimping Soldering IDC Press-in SMT Through

17 Right-angle SMT type MOD-YSJ88YA3C+ For panel (Screw lock) Right-angle SMT For RJ-45 MOD- YSJ88 YA3C+ ➀ ➁ ➂ Series name 8-8 Jack with shield Right-angle SMT type REF ø HONDA 1 REF. POS. #8 POS. #1 5.7 REF REF REF. Contacts Shell Insulator Nuts Screw lock 4-R R The lock screw is appended. 16MIN. 2 ±.5 7.4MIN. 6.25MIN. Recommended panel mounting- layout t=1.2mm~1.6mm 3.4 ± ±.5 ±.5 11 ±.5 POS. #1 POS. #8.65 ± ± ± ø t=1mm~1.6mm 8.5MIN Mating connectors: Assembly of MOD-YSP88P3C+ use Through SMT Press-in IDC Soldering Crimping wrapping

18 Modular Plug MOD-YSP88P3+ For cable Screw lock MOD- YSP88 P3+ ➀ ➁ ➂ Series name 8-8 Jack with shield Piyasshing Note 1: Minimum order size is 1, items. Note 2: When you buy connectors without overmold, please prepare the overmold yourself REF REF REF REF REF. Straight type Screw lock Contacts Shell A Shell B Insulator Screw lock The lock screw is appended. * If you are considering the purchase of harness work parts, please contact us for details. Mating connectors: MOD-YSJ88D3C+, MOD-YSJ88YA3C+ wrapping Crimping Soldering IDC Press-in SMT Through

06. har-mik INTERFACE CONNECTORS

06. har-mik INTERFACE CONNECTORS . INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,

More information

HARTING. Interface Connectors. People Power Partnership

HARTING. Interface Connectors. People Power Partnership 11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC

More information

D-Sub Connectors. Catalog E /09 Edition 3

D-Sub Connectors.  Catalog E /09 Edition 3 www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com Table of Contents General..............................................................................................2

More information

SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...

SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles... CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...

More information

MicroMate (MMCX) Amphenol Specifications

MicroMate (MMCX) Amphenol Specifications Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid

More information

CONEC provides reliable and effective solutions to OEM, EMS and cable houses.

CONEC provides reliable and effective solutions to OEM, EMS and cable houses. CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable

More information

SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De Xulong CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY REJECTED ISSUED BY CHECKED BY APPROVED

More information

STRAIGHT DIP SOLDER PLUG

STRAIGHT DIP SOLDER PLUG STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester

More information

RJ45 SINGLE PORT 100/1000/2.5G/5G BASE-T MAGNETICS

RJ45 SINGLE PORT 100/1000/2.5G/5G BASE-T MAGNETICS SERIES DESCRIPTION The series of RJ45 jacks with internal magnetics supports a wide range of configurations in 10/100Base-T, 1000Base-T, 2.5GBase-T and 5GBase-T applications. This series offers the ability

More information

1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors

1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB

More information

AMPLIMITE.050 Series Cable Assemblies, Series III

AMPLIMITE.050 Series Cable Assemblies, Series III Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements

More information

0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector

0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector 0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single

More information

High Performance, Microminiature Circular Connectors

High Performance, Microminiature Circular Connectors High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type

More information

June Multilayer Low Pass Filter. For MHz DEA163800LT-5017C1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]

June Multilayer Low Pass Filter. For MHz DEA163800LT-5017C1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 3300-3800MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 3300-3800MHz Conformity to RoHS Directive SHAPES

More information

High Performance, Microminiature Circular Connectors

High Performance, Microminiature Circular Connectors High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,

More information

I/O Card Interface Connectors

I/O Card Interface Connectors I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal

More information

R Z18 Series : SMB CARLOCK

R Z18 Series : SMB CARLOCK .. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY

More information

Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229

Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8

More information

Features. Samples. I max (A) P d. typ. (W)

Features. Samples. I max (A) P d. typ. (W) 0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

9 ORDERING INFORMATION MTJ MTJ SERIES

9 ORDERING INFORMATION MTJ MTJ SERIES Introduction: dam Tech MTJ series Modular Jacks are a complete line of PCB and wire leaded jacks which are UL and CS approved and meet all required FCC rules and regulations. dam Tech offers a multitude

More information

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple

More information

Multi-Pole Rectangular Connectors Specifications Table

Multi-Pole Rectangular Connectors Specifications Table Multi-Pole Rectangular Connectors Specifications Table Multi-Pole Rectangular Connectors Specifications Table Number of Poles Rating Insulation Resistance Dielectric Strength Contact Resistance Insertion

More information

SEK Solder board connectors

SEK Solder board connectors Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13

More information

Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications

Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market

More information

Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS

Varicon. Series  x.130 x.150 Grid Pattern FEATURES TECHNICAL SPECIFICATIONS Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations

More information

0.3 mm Pitch, 1.0 mm Height FPC Connector

0.3 mm Pitch, 1.0 mm Height FPC Connector 0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector

More information

Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS

Varicon. Series  x.130 x.150 Grid Pattern FEATURES TECHNICAL SPECIFICATIONS Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations

More information

0.6mm Pitch Stacking Height 3mm to 16mm Connectors

0.6mm Pitch Stacking Height 3mm to 16mm Connectors .6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking

More information

APPLICATION NOTE. Package Considerations. Board Mounting Considerations. Littelfuse.com

APPLICATION NOTE. Package Considerations. Board Mounting Considerations. Littelfuse.com package. Compared to products in plastic molded packages, the SESD device offers a significant performance-per-boardarea advantage. The SESD package and a dimensional view of the package bottom are shown

More information

Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)

Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) 0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

0.6mm Pitch Stacking Height 3mm to 16mm Connectors

0.6mm Pitch Stacking Height 3mm to 16mm Connectors .6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking

More information

Multi-Layer Power Inductors (IP_L Series)

Multi-Layer Power Inductors (IP_L Series) Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x

More information

HyperGrip - Push/Pull Plastic Circular Connectors

HyperGrip - Push/Pull Plastic Circular Connectors A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]

More information

POWER INDUCTOR PIP. AiT Semiconductor Inc. FEATURE APPLICATION ORDERING INFORMATION

POWER INDUCTOR PIP. AiT Semiconductor Inc.   FEATURE APPLICATION ORDERING INFORMATION FEATURE 1. Low profile and Compact Size 2. Low DC resistance 3. Open magnetic circuit construction APPLICATION 3011 2810-R 3015B 10040 1. LCD panels, DC/DC Converters 2. Digital camera, PDA 3. Portable

More information

Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H

Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................

More information

0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors

0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors .4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization

More information

Sealed Sensor Connector (SSC) System

Sealed Sensor Connector (SSC) System Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal

More information

CMC Hybrid Connectors Standard and Power Versions

CMC Hybrid Connectors Standard and Power Versions CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications

More information

Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply

Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector

More information

July Multilayer Band Pass Filter. For MHz DEA162450BT-1210A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]

July Multilayer Band Pass Filter. For MHz DEA162450BT-1210A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] R F C o m p o n e n t s July 2017 Multilayer Band Pass Filter For 2400-2500MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 2400-2500MHz Conformity to RoHS Directive

More information

CMC Hybrid Connectors Standard and Power Versions

CMC Hybrid Connectors Standard and Power Versions CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications

More information

305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing

305/315/355 SERIES CARD EDGE CONNECTOR.156 (3.96mm) Contact Spacing 305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style

More information

RM 5 Core and Accessories

RM 5 Core and Accessories Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 204 Matching handle B63399 204 Adjusting screw B65539 B65806 204 Core B65805 98 Clamps B65806 20 Insulating

More information

0.5mm Pitch SMT Board to Board Connector

0.5mm Pitch SMT Board to Board Connector All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

VLS-E series. Inductors for Power Circuits. Wound Ferrite

VLS-E series. Inductors for Power Circuits. Wound Ferrite May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS

More information

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.) 1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

SELECTOR SWITCH TYPE 04

SELECTOR SWITCH TYPE 04 SELECTOR SWITCH TYPE 0 MAIN FEATURES VERY ROBUST, MULTI WAFER, UP TO POSITIONS 5'000 switching cycles with up to 0 Ncm switching torque Gold plated contacts: micron Optional IP68 front panel sealing Operating

More information

Series IPT (26482 Type) Bayonet Coupler

Series IPT (26482 Type) Bayonet Coupler IPT330 eedthrough with Jack-to-Jack RJ45 Sample Part Number IPT330 02PP G 18 5E 1 7 RJ45 Category 2 IPT330 Material/inish 02PP = ront Panel Mount Square lange receptacle G = Insert grounded to shell; Omit

More information

S J

S J 1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V

More information

Compact Flash Card Connectors

Compact Flash Card Connectors Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth

More information

Type N connectors DIVIDER PAGE

Type N connectors DIVIDER PAGE Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110

More information

1mm Pitch Cable-to-Board Connectors supporting LVDS signal

1mm Pitch Cable-to-Board Connectors supporting LVDS signal NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:

More information

0.5mm Pitch SMT Board-to-Board Connector

0.5mm Pitch SMT Board-to-Board Connector 0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of

More information

KSC Series Sealed Tact Switch for SMT

KSC Series Sealed Tact Switch for SMT KSC Series Features/Benefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator

More information

Directory chapter 01

Directory chapter 01 Directory chapter 01 Miniature D connectors, 1.27 mm pitch Page I/O connectors................................................. 01.02 Pin and socket Technical characteristics........................................

More information

Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold

Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical

More information

ORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001

ORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001 DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to

More information

RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.

RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2. IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R

More information

DC to 6GHz Ultra-Small Coaxial Switch

DC to 6GHz Ultra-Small Coaxial Switch DC to 6Hz Ultra-Small Coaxial Switch MS-147 Series Outline The ultra-small MS-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (substrates)

More information

APPLICATION INFORMATION APPLICATION INFORMATION

APPLICATION INFORMATION APPLICATION INFORMATION RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5

More information

SFI Electronics Technology

SFI Electronics Technology 1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V

More information

SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43

SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43 Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform

More information

Single 2 Piece Contacts: BTB

Single 2 Piece Contacts: BTB Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years

More information

DISPOSABLE COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES

DISPOSABLE COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES B10 CHAPTER FISCHER CORE SERIES DISPO COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES Sterilizable (EtO), gamma) Color-coded for easy integration Single or two-piece shell Lightweight and shock resistant

More information

341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing

341/391 SERIES CARD EDGE CONNECTOR.100 (2.54mm) Contact Spacing 341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options

More information

Connector for Internal Serial Transmission. FI-R Series

Connector for Internal Serial Transmission. FI-R Series COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express

More information

... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS

... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS ... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe

More information

SMD POWER INDUCTORS SELECTION GUIDE

SMD POWER INDUCTORS SELECTION GUIDE SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0

More information

POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description

POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description 2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free

More information

1.25mm Pitch Super Low profile Crimping Connector

1.25mm Pitch Super Low profile Crimping Connector 1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height

More information

Features. V max (Vdc) I max (A) typ. (W) P d

Features. V max (Vdc) I max (A) typ. (W) P d 2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free

More information

MIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors

MIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors MIL-DTL-55302 QPL'D 2 and 3 Row Printed Circuit oard Connectors 17, 29, 33, 41, 53, 62, 65, 72, 80.1, 84, 96, 98, 120, 126, 160 and 160.4 General Specifications Number 17, 29, 33, 41, 53, 62, 65, 72, 80.1,

More information

Mini50 Unsealed Connector System 2.00mm Pitch

Mini50 Unsealed Connector System 2.00mm Pitch USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle

More information

Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)

Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A) 1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free

More information

MCX SERIES. Description. Applications. Microminiature Coaxial Connectors

MCX SERIES. Description. Applications. Microminiature Coaxial Connectors MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance

More information

0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions

0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions 0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The

More information

Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch

Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height

More information

S Straight PCB Panel Mount Plugs

S Straight PCB Panel Mount Plugs Sample Part umber K-43 M E P B Part umber PCB Panel Mount Plugs socket contacts with STRAIGHT PCB TERMIATIO Lightweight, rugged vertical mount headers feature gold-plated PC tail contacts for thru-hole

More information

RT Product Details

RT Product Details TE Connectivity My Cart My Part Lists Sign In/Register English (Change) What can we help you find? Products Industries Resources About TE My Account Innovation Support Center RT314024 Product Details Share

More information

Directory chapter 08. InduCom Robust and EMI protected D-Sub interfaces

Directory chapter 08. InduCom Robust and EMI protected D-Sub interfaces Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................

More information

HBE 24 SCREW & CRIMP TERMINATED INSERTS

HBE 24 SCREW & CRIMP TERMINATED INSERTS 1 HBE 24 SCREW & CRIMP TERMINATED INSERTS SCREW TERMINATED View from Cable Side CRIMP TERMINATED Panel Cut-Out Contacts Sold Separately These inserts fit in the HBE 24 Series Housings which are on the

More information

Positive Temperature Coefficient (PTC) Data Sheet

Positive Temperature Coefficient (PTC) Data Sheet Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable

More information

Z b. General Purpose Relays PCB Relays SCHRACK. Power PCB Relay RT1

Z b. General Purpose Relays PCB Relays SCHRACK. Power PCB Relay RT1 Power PCB Relay RT1 n 1 pole 12A/16A, 1 form C (CO) or n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85 C (DC coil) n WG version: product in accordance to IEC 60335-1

More information

Stac64 UnSealed connector SyStem

Stac64 UnSealed connector SyStem Stac64 A stackable connection system for unsealed applications, providing single and multi-pocket PCB solutions, offering a diverse range of circuit sizes Stac64 34729 Female Signal Receptacle 34803 CTX64

More information

P Straight PCB Panel Mount Receptacle

P Straight PCB Panel Mount Receptacle How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied

More information

Low Profile Swing-Lock Board to Wire Connector for Power

Low Profile Swing-Lock Board to Wire Connector for Power Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure

More information

High speed transmission, 1mm pitch Small Interface Connector

High speed transmission, 1mm pitch Small Interface Connector NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together

More information

0.4 mm Contact Pitch, Board-to-FPC Connectors

0.4 mm Contact Pitch, Board-to-FPC Connectors 0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights

More information

Card Edge Connectors Catalog Issued 7-03

Card Edge Connectors Catalog Issued 7-03 Catalog 1654080 Issued 7-03 Introduction This catalog contains product descriptions of MP Card Edge Connectors. These connectors are presented in three groups: Solder Type Board-to- Board, Press-fit Board-to-

More information

Compact Flash Card Connectors

Compact Flash Card Connectors Compact Flash Card Connectors Complies with Compact Flash Association MI20/21 Series (a)space-saving design 7.0 51.75 Features 1. Compact design occupies minimum space Connectors are designed with small

More information

Low Profile Swing-Lock Board to Wire Connector for Power

Low Profile Swing-Lock Board to Wire Connector for Power Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing

More information

Shielded SMD Power Inductor

Shielded SMD Power Inductor PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for

More information

8D Series D38999 Stainless Steel Series

8D Series D38999 Stainless Steel Series Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle

More information

FISCHER ULTIMATE TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES

FISCHER ULTIMATE TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES H CHAPTER PAGES FISCHER TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES IP68 to -0m / IP69 / Hermetic 60 EMC shielding High corrosion resistance 0,000 mating cycles H - FISCHER TM SERIES Table of contents

More information

D-Subminiature EMI/RFI Shielding Interconnection Systems

D-Subminiature EMI/RFI Shielding Interconnection Systems Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS

More information

INDUCTORS SMD POWER INDUCTORS SMD

INDUCTORS SMD POWER INDUCTORS SMD INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts

More information

Circular & Rectangular Multi-Pole Connectors MPC06

Circular & Rectangular Multi-Pole Connectors MPC06 Circular & Rectangular Multi-Pole Connectors MPC06 Contents Contents... Multi-Pole Circular Connectors Specifications Table... Product Lineup... P Quick Locking Type... - 7 0P Quick Locking Type... - 0

More information

High speed transmission, 1mm pitch Small Interface Connector

High speed transmission, 1mm pitch Small Interface Connector NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together

More information

RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.

RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2. IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.

More information