Steam Trapping and Steam Tracing Equipment
|
|
- Daniel Peters
- 5 years ago
- Views:
Transcription
1
2 Steam Trapping and Steam Tracing Equipment
3 Steam Traps Pay less money for energy and more attention to the environment. It s pretty obvious, really. An efficient steam trap wastes less energy, which means you burn less fuel and reduce emissions. The results are energy savings and a cleaner, healthier environment. By helping companies manage energy, Armstrong steam traps are also helping protect the world we all share. As a steam trap wears, it loses efficiency and begins to waste energy. But Armstrong inverted bucket traps last years longer than other traps. They operate more efficiently longer because the inverted bucket is the most reliable steam trap operating principle known. Clearly, the longer an efficient trap lasts, the more it reduces energy wasted, fuel burned and pollutants released into the air. It s an all-around positive situation that lets the environment win, too. Bringing energy down to earth in your facility could begin with a renewed focus on your steam system, especially your steam traps. Said another way: Zeroing in your steam traps is an easy way to pay less money for energy and more attention to the environment. Companies around the world are beginning to realize that rather than being separate challenges, energy and the environment are and have always been a single mission. And that quality management in one area will surely impact the other. 64 ST-1
4 Armstrong Steam Trap ID Charts Series 200 Series 800 Series 880 Series Body Material ASTM A216 WCB Carbon /2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" Size on Page ST-11 ST-13 ST-15 ST-17 ST-19 Series 300 Series 411G 1,300 lb/hr , ASTM A Forged 1, , , ASTM A105 Forged 411G 1,000 ST-21 ST-23 Series 421 1,300 lb/hr Series 400 1, Body ASTM A105 Forged Cap ASTM A216 WCB 421 1, ,050 ASTM A182 1, F ,000 Forged 1,000 1, ,000 ST-23 ST-25 See tables on pages ST-21, ST-24 and ST-26 for complete temperature/pressure rating information. Operating pressure and temperature may be limited depending on the class of flange selected. 65 ST-2
5 Steam Trap ID Charts Series 401-SH 770 lb/hr Series 501-SH 950 lb/hr 1, , Body Material Carbon ASTM A106 Gr. B 401-SH 1, L 501-SH 1,540 ASTM A312 Size 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" on Page ST-27 ST-27 Series ,150 lb/hr Series ,500 lb/hr 1,730 2, , ASTM A182 F22 Forged ASTM A182 F22 Forged 5133G 1, G 1, G 2,700 ST-29 ST-31 Series Series U ,380 lb/hr L L U (optional U strainer is carbon steel) U ST-35 ST-35 Series ,380 lb/hr L ST-37 Series ,300 lb/hr L ST-39 Series 20-DC Automatic Differential Controllers DC DC DC DC DC DC 250 ST-41 See tables on pages ST-30 and ST-32 for complete temperature/pressure rating information. Operating pressure and temperature may be limited depending on the class of flange selected. 66 ST-3
6 Steam Trap ID Charts Series 80-DC Automatic Differential Controllers Series TVS 80-DC Automatic Differential Controllers Body Material 81-DC DC DC 250 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 84-DC DC DC 250 TVS 81-DC 250 TVS 82-DC 250 TVS 83-DC 250 Size on Page ST-43 ST-45 Series 30-DC Automatic Differential Controllers 1, DC 650 1, DC 650 ASTM A Forged 1, DC 650 1, DC 650 ST-47 Series B & BI 8,900 lb/hr Series A & AI 8,600 lb/hr Series J&K 105,000 lb/hr B2, BI2 30 B3, BI3 30 B4, BI4 30 B5 30 B6 30 B8 30 AI2 175 A3, AI3 175 A4, AI4 175 A5 175 A6 175 A8 175 J8 175 K10 50 ST-51 ST-53 ST-55 Series L&M 208,000 lb/hr Series CS 13,281 lb/hr (screw on) L8 250 L M Cast CS 465 ST-57 ST-59 Series LS&MS 280,000 lb/hr ASTM A216 WCB Carbon LS8 450 LS MS ST-61 Series AI and BI for in-line connection. Operating pressure and temperature may be limited depending on the class of flange selected. 67 ST-4
7 Steam Trap ID Charts TVS 800 Trap Valve Station TVS 4000 Trap Valve Station Body Material ASTM A351 Gr. CF8M Size 3/8" 1/2" 3/4" 1" TVS TVS TVS TVS on Page ST-63 ST-67 TVS 2000 Trap Valve Station TVS ST-71 Series CD-33 Disc CD-33 2,428 lb/hr Series CD-33S Disc w/integral Strainer ASTM A743 Gr. CA40 CD-33L 600 CD-33S ST-75 2,428 lb/hr CD-33SL ST-75 Series CD-3300 Disc 800 lb/hr CD ST-78 Series CD-40 Controlled Disc 2,850 lb/hr Carbon CD CD CD ST-79 Series CD-60 Controlled Disc 2,850 lb/hr Forged Carbon CD CD CD ST-79 Series WT Wafer Cold Water Start-up 1,600 lb/hr C1018 Carbon WT WT WT ST-81 Series MT Wafer Cold Water Start-up 1,000 lb/hr Flanged Carbon WMT /4" 3/8" MT ST-83 Operating pressure and temperature may be limited depending on the class of flange selected. 68 ST-5
8 Steam Trap ID Charts SH Bimetallic Cold Water Start-up Capacities to 11,000 lb/hr Series TT Bellows NPT BSPT NPT BSPT Buttweld Buttweld Body Material Carbon 3/8" 1/2" 3/4" 1" SH SH-900 L = 650* H = 900* Size TTF-1 on Page ST-84 ST TTF-1R 300 ST-85 3,450 lb/hr TT-2000 Series TS-2/TS-3 Radiator 1,600 lb/hr Threaded TS-2 50 Bronze TS-3 65 ST-88 TAVB Bellows w/integral Vacuum Breaker Straight-Thru TAVB-2 TAVB ST-87 Series TC Clean Steam Clamped 3,450 lb/hr Sanitary TC-C 100 Series TC Clean Steam Sealed 3,775 lb/hr Sanitary Threaded TC-S 120 Tube End ST-89 Series TC Clean Steam Repairable 3,775 lb/hr Operating pressure and temperature may be limited depending on the class of flange selected. *L = low pressure, H = high pressure. Sanitary Threaded TC-R 100 Tube End 69 ST-6
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
More informationSECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
More informationChoice of body materials Cast iron, carbon steel, chrome moly, forged steel, stainless steel, bronze.
Strainer Tight seating Both ends of the chamber are precisely machined to provide perfectly round and smooth seating surfaces as well as fixed chamber length. The screen seats snugly on the machined surface
More informationPRESSURES TO 740 PSIG (51 BARG) TEMPERATURES TO 800 F (427 C) MODELS. 300Y Series Ordering Code. Add l Inlet Size Model Body Dash Perf Mesh Require-
APPLICATIONS Steam, liquid, gas and oil service Power industry Pulp and paper Chemical industry Process Equipment Metal & Mining Water & Waste OPTIONS Other perforated screens and mesh liners Other drain
More informationPRESSURES TO 285 PSIG (19.7 BARG) TEMPERATURES TO 750 F (390 C) MODELS. 150Y Series Ordering Code
APPLICATIONS Steam, liquid, gas and oil service Power Industry Pulp & Paper Process Equipment Chemical Industry Metal & Mining Water & Waste OPTIONS Other perforated screens and mesh liners Other drain
More informationSCA Series Steel Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationAVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
More informationChampion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
More informationPython Series Control Valves
s When accurate control is desired from your steam or water applications the Armstrong Python 1100 Series Control Valve will squeeze every bit of performance out of your system and deliver precise control.
More informationSTEAM TRAPS. Inverted Bucket Steam Traps (continued) Series B. Dimensions in. (mm)
X X X X X X X X X X X X X X TEMP. PRESS. PRESS OFF TEMP. PRESS. PRESS OFF DATE CODE Hoffman ITT DATE CODE Hoffman ITT STEAM TRAPS Inverted Bucket (continued) 3 Available in sizes 3 4" and 1" NPT and BSPT
More informationDESIGNER S GUIDE STRAINERS INTERNATIONAL
Y Strainers Basket Strainers T-Strainers Automatic Backwash Strainers Duplex Strainers Suction Diffusers Butterfly Valves Check Valves INTERNATIONAL DESIGNER S GUIDE Formerly SSI Equipment, now manufactured
More informationHinge Pin. 7 Bearing. Spring Plate. Spring. Disc. Body. Gasket. Stop PIn
Hinge Pin Bearing Spring Plate Spring Disc Body Gasket Stop PIn TYPICAL MATERIAL OF MAIN PARTS No. Part Name Carbon Steel Stainless Steel Alloy Steel 1 Stop Pin 2 Gasket 3 Body 4 Disc 5 Spring 6 Spring
More informationHIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
More informationAWH ARMATUREN- WERK HALLE GMBH. Thermodynamic steam trap. Thermodynamic steam trap. Thermodynamic steam trap PN40. Thermodynamic steam trap PN63
TD PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3) - with butt weld ends (Fig. 640/641...4) Forged steel High temperature steel
More informationProduct data sheet Wouter Witzel - EVFSGD Valves Rubber Lined - Centric EVFS PDS H
DESIGN Body Double Flanged type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series 13
More informationHoffman Specialty Service Parts Catalog PARTS LIST HS-800C
Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C Hoffman Specialty Table of Contents STEAM TRAPS FLOAT AND THERMOSTATIC SERIES PAGE INVERTED BUCKET SERIES PAGE C 6 B0 H B I B X 6 B 6 8 B 6 0
More informationBrass, Bronze, Iron and Stainless Steel Valves
Price Schedule June 1, 2011 Supersedes BIV-01-11 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE GATE VALVES
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationForged steel High temperature steel Stainless steel BR 640 / BR 641 (Y) Page 2. with system connectors. Stainless steel BR 642 / BR 643 (Y) Page 4
Thermodynamic steam traps TRACO CONA TD Thermodynamic steam trap PN40 - with flanges (BR 640/641...1) - with screwed sockets (BR 640/641...2) - with socket weld ends (BR 640/641...3) - with butt weld ends
More information+91-8046032093 Y K Enterprises http://www.ykenterprises.in/ We're Authorized Dealers for KSB including Gate Valves, Globe Valves, Check Valves and Ball Valves, As well as for Pennant including Thermodynamic
More information15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationCHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER
More informationYARWAY FLOAT TRAPS SERIES 23000, 26000, 33000
SERIES 23000, 26000, 33000 Series 23000 and 26000 for steam-using equipment, supporting high-volume drain discharge. Series 33000 for air and gas, achieving energy conservation through rapid drain discharge.
More informationTYPE D PRESSURE REDUCING PILOT CONTROLS 3 to 300 PSIG
PILOTS TYPE D PRESSURE REDUCING PILOT CONTROLS 3 to 300 PSIG Self Contained Spring Operated Normally Closed Packless Construction Fluid, Gas & Vapor Applications Accurate Regulation Unaffected by Service
More informationBALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
More informationDirect Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
More informationStandard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections
Standard-Low Emission Valves to 100 PPM Cast Steel Valves 150 2500 ASME; Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End Connections;
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationControl Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
More informationFEATURES FLP SERIES COMPLETE ASSEMBLIES FL SERIES PRODUCT CONFIGURATOR ONE VALVE DOES IT ALL
Thermal Shutdown Valves for Fire Protection Systems FLP SERIES COMPLETE ASSEMBLIES BI-TORQ Valve Automation s complete line of API 0 certified quarter-turn valves suit a wide range of applications. Carbon
More informationLCS6822 (Class 150) LCS7822 (Class 300)
Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications
More informationWafer Silent Check Valves
Applications Liquid Service Metals & Mining Process Industry Water & Waste Water Power Industry Pulp & Paper Chemical Industry Oil & Gas Wafer Silent Check Valves Pressures to 740 PSIG Temperatures to
More informationGrey cast iron Fig. 610 Page 2. Forged steel Stainless steel Fig. 610/612 (Y) Page 4
Thermostatic steam trap CONA M Thermostatic steam trap Thermostatic steam trap PN16 - with flanges (Fig. 610...1) - union with butt weld ends (Fig. 610...5) Grey cast iron Fig. 610 Page 2 Thermostatic
More informationPRODUCT: SERIES DESCRIPTION PAGE TRAPS
PRICE SHEET HS-113 Effective January 14, 2013 Replaces Price Sheet HS-112 Dated January 30, 2012 These prices are subject to change without notice. All shipments will be billed at the price in effect at
More informationVALVES. A. Section HVAC Basic Materials and Methods. E. Section Building Automation and Control System Guidelines
230523 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230500 HVAC Basic Materials and Methods B. Section 230510 Chilled Water System C. Section 230520 Heat Generation D. Section 238216 Coils E.
More informationValves. Fittings. Actuators
Valves Fittings Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; CE Registered Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged,
More informationFEATURES ONE VALVE DOES IT ALL IDEAL FOR YOUR VALVE... OR OURS SURE STOP MOUNTING PLATE BALL OR BUTTERFLY VALVES
Fusible Link Valves for Fire Protection Systems IDEAL FOR YOUR VALVE... OR OURS In addition to high-quality designs for BI-TORQ s own API 0 fire rated valves, we have manufactured customized assemblies
More informationTYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F Temperature Regulation for Batch Process Storage Heaters (Water, Fuel Oil or Chemical) Air Heating TYPE ET14 TEMPERATURE
More informationP R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S SERIES T WAFER PATTERN CHECK VALVE HIGH PERFORMANCE HIGH FLOW LARGE UNOBSTRUCTED FLOW PATH RUGGED, HIGH INTEGRITY CONSTRUCTION Series T Installation
More informationPRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES
WATER METERS VALVES & COCKS PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES FILTER, REGULATOR & LUBRICATORS W IKA V I INSTRUMENTS
More informationOUNCES PRESSURE REGULATOR
OUNCES PRESSURE REGULATOR BACK PRESSURE TO VACUUM APPLICATIONS: To maintain ounces of positive pressure on systems flowing into a downstream vacuum, such as vapor recovery systems. PRESSURE RANGE: Upstream:
More informationSPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
More informationForged steel High temperature steel Stainless steel Fig. 640/641 (Y) Page 2. High temperature steel Fig. 640/641 (Y) Page 6
Thermodynamic steam trap CONA TD Thermodynamic steam trap Thermodynamic steam trap PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3)
More informationCondensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
More informationElectronic Control Valves
MODEL 131 Series (Full Internal Port) 631 Series (Reduced Internal Port) Electronic Control Valves Model 131-01/631-01 Simple Proven Design Quality Solenoid Pilot Controls Ideal For SCADA Systems Multi-Function
More informationForged steel Fig. 640/641 (Y) Page 6
Thermodynamic steam trap CONA TD ANSI Thermodynamic steam trap Thermodynamic steam trap ANSI150 / - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig.
More informationSection 14. Gate Valves
Section 14 Gate Valves 221 A-Gate Brass Gate Valve S Brass Brass Brass Brass and Wheel Ductile Iron Threading ISO 228 Thread BSP 180 C 16 bar General Purpose Brass Gate Valve AGVFF/015 15 43 85 50 0.24
More informationSERVICE FEATURES CAST STEEL VALVES PRODUCTION RANGE PRODUCTION MATERIALS. Class Type UNIT : NPS GATE
API 600 Cast Steel Valves 1 SERVICE FEATURES Several trim combinations available for various services. Straight-through port design offering a good flow with minimum frictional loss and turbulence. Cast
More information* T Temperature-Indicating Dial (Must be field set and calibrated to an actual thermometer)
175/153 Series Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2006 Watson McDaniel Company 175 HEATING 153 COOLING 175 / 153 Screwed Connection
More informationPRESSURE REGULATORS PRESSURE REDUCING. APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure
PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure PRESSURE RANGE: Upstream: 10 psig to 300 psig Downstream: 10 psig to 300
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationHIGH PERFORMANCE BUTTERFLY VALVE
Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications
More informationType. Facts. Flanged Safety Relief Valves spring loaded PMetric + US Units. The-Safety-Valve.com
Type 26 Flanged Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Type 26 Orifice Selection charts 1 x 1 3L x 1 3 x 1 6 x 1 9 x 1 1 x 1 2 x 3 WCB 262.64X 262.646X 262.647X
More informationYStrainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS RATINGS SIZES
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas YStrainers Pressures to 3705 PSIG Temperatures to 800ºF FEATURES Low pressure
More informationP R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C E C K V A L V E S SERIES X EXTENDED BODY CECK VALVE PARTS LIST ITEM PART NAME 1 BODY 2 SEAT INSERT 3 FLAPPER 4 SPRING 5 SPRING PIN 6 SEAT SEAL IG PERFORMANCE IG
More informationIron Horse ED Series Pressure Regulator
REGULATORS Applications Pressure Regulation for Steam Distribution Single Point or Multiple Use Applications Pressure Control for Steam Plants District Heating Systems Single Stage Reduction Stations Two
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationTY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
More informationSpira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationForged steel Stainless steel Fig. 610/612 (Y) Page 2. Forged steel Fig. 616 Page 6
Thermostatic steam trap CONA M ANSI Thermostatic steam trap Thermostatic steam trap ANSI150 / - with flanges (Fig. 610/612...1) - with screwed sockets (Fig. 610/612...2) - with socket weld ends (Fig. 610/612...3)
More informationHOT WATER/STEAM COMPONENTS
Section Page Solenoids, Coils & Related Parts...-2 Heat Exchangers...-5 Pressure Valves (Steam/Water) Auto Pressure Relief...-6 Steam Safety Relief...-6, -7 Vacuum Breakers...-6 Pressure & Temperature
More informationHigh Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
More informationSeries 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
More informationCASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
More informationPRESSURE REGULATORS LIQUID BACK PRESSURE
LIQUID BACK PRESSURE APPLICATION: Control back pressure in liquid packed systems where an auxiliary source of supply gas pressure is available. SUPPLY PRESSURE: Equal to or not less than 60% of controlled
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationHoffman Specialty General Catalog
Hoffman Specialty General Catalog HS-900G ESP-PLUSTM For computer aided selection of Steam Trap and Regulators, please refer to the Steam Specialty Component Selectors at http://bellgossett.com/selectionsizing-cad-tools/
More informationRAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
More informationCompact wafer-style design and round unobstructed port tackle many tough applications.
VLVES & CONTROLS Compact wafer-style design and round unobstructed port tackle many tough applications. Features Minimizes piping support with the compact wafer style body. The Prince wafer check valves
More informationS and SF Series Cast Iron Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSuction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x Technical Data...3
Special Purpose Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x 20...2 Technical Data...3 Triple Duty Valve - Iron Body Style TDV 125# Flanged 2-20...4 Technical Data...5 Pressure
More informationStainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
More informationApproved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
More informationCommercial Ball Valves
Price Schedule C-01-18 January 1, 2018 Supersedes C-06-15 Commercial Ball Valves BRASS & BRONZE BALL VALVES TWO-PIECE BODY $ 10.95 0.27 20 120 10.95 0.29 20 120 012 10.10 0.38 12 96 034 13.90 0.58 10 60
More informationCONA Further components / Accessories
CONA Further components / Accessories Liquid drainer PN16 / PN40 - with flanges (Fig. 665...1) - with screwed sockets (Fig. 665...2) - with socket weld ends (Fig. 665...3) - with butt weld ends (Fig. 665...4)
More informationThe SC Series Surge Check Valves Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves.
The Series Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA
More informationIBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationAVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)
AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO
More informationPRESSURE REGULATORS LIQUID BACK PRESSURE
LIQUID BACK PRESSURE APPLICATION: Control back pressure in liquid packed systems where an auxiliary source of supply gas pressure is available. SUPPLY PRESSURE: Equal to or not less than 60% of controlled
More informationInstallation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822
Installation, Operation and Maintenance Guide II NIBCO High Performance Butterfly Valves Series 6822 and 7822 Statements: NIBCO High Performance Butterfly Valves, Series 6822 and 7822, have been designed
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More information-ANSI. maintenance-free. Stop valve with bellows seal,
Stop valve with bellow seal -ANSI ARI-FABA Long Life - Stop valve with bellows seal, maintenance-free ARI-FABA -ANSI Long Life Class 150 with flanges TA-Air (zero emission) TÜV-Test-No. 088-945053 Cast
More informationSECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
More informationGESTRA DISCO Non-Return Valves RK 41, PN 16. Non-Return Valves PN 6/10/16 DN (½ 8") RK 41, PN 16. Application for liquids, gases, vapours.
GESTRA DISCO Non-Return Valves RK 41, PN 16 Gestra Steam Systems GESTRA Non Return Valves RK 41 PN 6/10/16 15-200 (1/2" - 8") Issue Date: 8/01 Non-Return Valves PN 6/10/16 15 200 (½ 8") RK 41, PN 16 A2
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationPRESSURE REGULATORS GAS BACK PRESSURE. APPLICATION: Vent lines on oil separators, flow treaters, compressor stations, gas gathering systems.
GAS BACK PRESSURE APPLICATION: Vent lines on oil separators, flow treaters, compressor stations, gas gathering systems. CERTIFICATIONS: Canadian Registration Number (CRN): 0C16234.24567890NTY (Ductile)
More informationSECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
More informationSeries 30,000 Rotary Process Valve. Technical data API 609, DIN 3840.
Series 30,000 Rotary Process Valve The outstanding performance of triple offset, metal seated Vanessa Series 30,000 valve is the ideal solution to achieve perfect shutoff in any process. Features Torque
More informationIron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
More informationA GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
More informationSECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS. Standard Compliance/Certifications S-2 Advantages S-3
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS DESCRIPTION Standard Compliance/Certifications S-2 Advantages S-3 PAGE Soft Seat Exploded View S-4 Fire Safe Seat Exploded
More informationExperience In Motion. Gestra Steam Solutions Catalog
Experience In Motion Gestra Steam Solutions Catalog Contents The Flowserve Gestra Steam Trap Range 5 What Are Steam Traps? 5 Short Guide to Steam Trap Selection 6 Gestra Steam Traps, Liquid Drainers and
More informationPressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
More informationA. Provide all HVAC specialties required to complete the installation of all HVAC systems. B. Manufacturers: Refer to individual product item.
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 02 PART 1 GENERAL 1.01 DESCRIPTION A. Provide all HVAC specialties required to complete the installation of all HVAC systems.
More information310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
More informationButterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15
TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions
More informationRAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all
More informationSafety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More information