TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F"

Transcription

1 TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F Temperature Regulation for Batch Process Storage Heaters (Water, Fuel Oil or Chemical) Air Heating TYPE ET14 TEMPERATURE REGULATOR Pilot Type T14 Thermostat F DIMENSIONS inches (mm) SIZE F G /8 5 /8 1 1 /4 (10) (16) (2) 1 /2 5 /8 1 1 /4 (15) (16) (2) /4 5 5 /8 1 /8 (20) (14) (5) 1 5 /4 1 1 /2 (25) (146) (8) Adjusting Spring Adjusting Wheel No. 8B Tee Bleedport Bend No. 4A Bleedport Serial No. Plate G 1 1 / /8 (2) (152) (48) 1 1 /2 6 1 /4 2 (40) (159) (51) /8 2 1 /8 (50) (168) (54) 2 1 /2 6 /4 2 /8 (65) (171) (60) 7 1 /4 2 /4 (80) (184) (70) Serial No. Plate /2 (100) (20) (89) Restriction Bend 1/4" Union No. 5A Restriction Elbow Type E No. 5B Open Elbow Type E2 Do not insulate below this line Main Valve Type E or E2 Valve is tapped so that Pilot may be mounted on either side /2 (125) (229) (89) /8 4 (150) (251) (102) /2 6 1 /4 (200) (267) (159) /2 6 (250) (18) (152) /2 (00) (56) (216)

2 TYPE E2 MAIN VALVE LOW PRESSURE LOW DIFFERENTIAL SIZES /4" 12" PRESSURES to 15 PSIG at 250 F TYPE E2 MAIN VALVE Pressure Regulating for Steam Distribution Regulating for Process Control (Temperature or Pressure) Maintain Back Pressure or Differential Pressure For use with Self-contained, Pneumatic or Electronic Pilots Single Point or Multiple Use Applications Slow Start-up or Shutdown VALVE RATINGS Valve Ends Pressure Temperature ASME/ANSI PSIG (bar) F ( C) CAST IRON B16.4 Class 250 NPT 15 (1.0) 250 F (121 C) B16.1 Class 125 Flanged 15 (1.0) 250 F (121 C) Canadian Registration # OC C Normally Closed Single Seat Hycar Diaphragm Protected Main Spring Gas & Steam Applications Accurate Regulation Unaffected by Service Conditions ANSI/FCI 70-2 Class IV Shutoff Virtually Frictionless for Long Service Life Packless Construction Easy In-line Maintenance Wide Variety of Pilots for Many Applications Minimum Operating P psi (.2 bar) Lifetime Warranty against Wiredrawing of Seat & Disc * OPTIONS Composition Disc for liquid, air or gas service Insulcap Insulating Jacket Integral Mount Pilot EZ Connections TYPICAL CONFIGURATIONS PRESSURE REDUCING TYPE E2D AIR ADJUSTED TYPE E2A SERIES BACK PRESSURE TYPE E2Q LOAD ALLOCATING TYPE E2FD AIR CONTROLLED TYPE E2AP60 ELECTRONIC SLOW START TYPE E2D208D SOLENOID CONTROLLED TYPE E2MD SOLENOID ACTUATED TYPE E2M DIFFERENTIAL TYPE E2N TEMPERATURE CONTROL TYPE E2T14 TEMP. & PRESSURE CONTROL TYPE E2T14 RATED FLOW COEFFICIENTS (Cv) SEAT REGULATOR SIZE FACTOR / /4 1 1 / / Full * When installed according to factory specifications.

3 TYPE E2 MAIN VALVE SPECIFICATION The valve shall be self-operated, external pilot type, single seated, hycar diaphragm actuated, normally closed design. The valve will function quickly and shut tight on dead end service. Internal parts including seats, discs and stems shall be of stainless steel. There shall be no springs in the steam flow path and no stuffing box. The valve shall be easy to maintain with all parts accessible without removal from the line. MATERIALS OF CONSTRUCTION Body, Cast Iron ASTM A126 Cl. B Body, Cast Bronze ASTM B UNSC Stem 0 St. Stl. ASTM A582 Disc /4-2" 420 St. Stl ASTM A74 CA-40 Disc 2-1/2-12" 04 St. Stl. ASTM A167/A240 Seat 420 St. Stl. ASTM A74 CA-40 Gasket Non-asbestos Diaphragm Hycar Spring Steel A C D B TYPE E2 MAIN VALVE DIMENSIONS inches (mm), WEIGHTS pounds (kg) A OTHER DIMENSIONS APPROX. WT. CI,BRZ CI C CI,BRZ CI SIZE ANSI ANSI B Std. Integral D* ANSI ANSI NPT 125 Mount Mount NPT 125 /4 4 / /8 5 /8 7 /4 18 (19) (121) (20) (7) (92) (197) (8) 1 5 /8 5 1 /2 8 5 /8 4 /8 8 1 / (25) (17) (140) (20) (92) (111) (206) (9) (10) 1 1 /4 6 1 /2 6 / / /4 0 (2) (165) (171) (229) (105) (101) (210) (14) (15) 1 1 /2 7 1 /4 6 7 /8 9 /4 4 /8 4 1 /2 8 / (8) (184) (175) (248) (111) (118) (222) (16) (18) /2 8 1 / /2 5 1 / (51) (191) (216) (267) (1) (127) (254) (2) (26) 2 1 /2 9 / /2 5 /4 5 / /2 70 (64) (28) (267) (146) (16) (292) (2) /4 6 5 /8 6 /8 12 /4 98 (76) (254) (286) (168) (162) (24) (45) /8 1 1 /2 6 /4 6 5 /8 1 5 /8 15 (102) (02) (4) (171) (168) (46) (61) / /4 7 1 /2 7 / (127) (46) (62) (191) (187) (81) (84) / / /8 250 (152) (84) (406) (200) (178) (422) (114) /2 9 1 / / (20) (48) (508) (241) (25) (505) (550) / /8 2 7 /8 690 (254) (600) (610) (276) (606) (14) / / / (05) (67) (711) (24) (689) (482) *Add 55% to D dimension for stem removal clearance.

4 TYPE T14 VAPOR TENSION TEMPERATURE PILOT CONTROLS 20 to 500 F Precise, Rapid Response Spring Operated Self Contained Normally Open, Direct Operation (Heating) Packless Construction Fluid, Gas and Vapor Applications Strainer Screen Built-in Easy in-line Maintenance OPTIONS Stainless Steel Flexible Tubing Thermostat Well Stainless Steel Capillary Tubing Dial Thermometer Tubing longer than 10 Integral Mount Thermostat other than #700 (see Options Section) TYPE T14 TEMPERATURE PILOT Storage Heaters Jacketed Kettles Vats RATINGS (Maximum Inlet Conditions) Pressure Temperature Construction PSIG (bar) F ( C) Cast Iron (22) Cast Bronze (204) Cast Steel (400) TEMPERATURE RANGES ( F) THERMOSTATS TYPICAL CONFIGURATIONS TEMPERATURE REGULATING ET14 TEMPERATURE & PRESSURE ET14D TEMPERATURE REGULATING E2T14 TEMPERATURE & PRESSURE E2T14D TEMPERATURE REGULATING E5T14 TEMPERATURE & PRESSURE E5T14D Canadian Registration # OC C

5 TYPE T14 VAPOR TENSION TEMPERATURE PILOT SPECIFICATION Pilot valve shall be separate from the main valve and connected to it by unions. Pilot seats shall be protected by built-in strainer screens. Pilot shall be interchangeable on all sizes of main valves. Thermal elements shall provide a 100 F (8 C) range of temperature adjustment and shall withstand 100 F overheating without damage. Handwheel adjustment for temperature shall be standard. Unless otherwise scheduled, thermal elements shall be equipped with 10 feet of brass flexible tubing. Number 700 bronze bulb, Number 728 bronze well shall be supplied for storage tank applications. Steel wells shall be supplied for fuel oil service. 5 7 /8 (149) 11 /8 (289) MATERIALS OF CONSTRUCTION Body, Cast Iron ASTM A126 Cl B Body, Cast Bronze ASTM B61-80 UNS C92200 Body, Cast Steel ASTM A216 GR. WCB Stem 2024-T4 ASTM B Disc 440 St. St. ASTM A COND A Seat 420 St. Stl ASTM A276 COND A Gasket Graphite Diaphragm Bronze ASTM B10-77 UNS C51000 Spring Steel 2 (51) TYPE T14 TEMPERATURE PILOT 1 LBS. (6 KG) 1 /2 (89)

TYPE D PRESSURE REDUCING PILOT CONTROLS 3 to 300 PSIG

TYPE D PRESSURE REDUCING PILOT CONTROLS 3 to 300 PSIG PILOTS TYPE D PRESSURE REDUCING PILOT CONTROLS 3 to 300 PSIG Self Contained Spring Operated Normally Closed Packless Construction Fluid, Gas & Vapor Applications Accurate Regulation Unaffected by Service

More information

Technical Data TYPE T124 & T134 TEMPERATURE PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4512A

Technical Data TYPE T124 & T134 TEMPERATURE PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4512A WATTS INDUSTRIES, INC. Technical Data SD 4512A SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 PRINTED IN U.S.A. SD 4512A/9806 T124/T134 PILOT FRONT VIEW 2 1 /16 F 5 7 /8 2 3

More information

CASH VALVES TYPE G-4 PRESSURE REGULATORS

CASH VALVES TYPE G-4 PRESSURE REGULATORS A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.

More information

TYPE E Main Valve Sizes 3 /8 through 12

TYPE E Main Valve Sizes 3 /8 through 12 Technical Data SD 3001E PRINTED IN U.S.A. SD 3001E/9709 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 A B TYPE E MAIN VALVE FACE TO FACE DIMENSIONS C D E DIMENSIONS (inches)

More information

CASH VALVES TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES

CASH VALVES TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES Self-actuating pilot operated pressure reducing valve handling air, gas, and steam and accurate to within 1 /2% up to 3" and 1% for larger sizes. Description The G-4 regulator is a self-actuating pilot

More information

W91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer

W91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer Design & Operation W91 Non-Indicating W94 Dial Thermometer Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company CAPILLARY

More information

Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250

Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work with either a pneumatic

More information

Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250

Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Technical Instructions Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work

More information

SERIES 2000 TEMPERATURE REGULATOR SERIES 2000 TEMP. REGULATOR. SIZES 1/2" 2" CONTROLS -25 to 400 F

SERIES 2000 TEMPERATURE REGULATOR SERIES 2000 TEMP. REGULATOR. SIZES 1/2 2 CONTROLS -25 to 400 F SERES 2000 TEMP. SERES 2000 TEMPERATURE APPLCATON DATA DRECT ACTNG Bottle Washing Machinery Steam Tables Plating Tanks Heating Ducts Fuel Oil Heaters Cooking Vats Water Heaters Heat Exchangers Parts Washer

More information

Direct-Operated Pressure & Temperature Regulating Valves

Direct-Operated Pressure & Temperature Regulating Valves Direct-Operated & Temperature Regulating Valves Direct-Operated are used for controlling pressure or temperature in a variety of applications. Regulating Valves Page No. Cast Iron 3/8 2 Page No. O Series

More information

Self-Operating Temperature Regulators

Self-Operating Temperature Regulators Self-Operating Temperature Regulators Remote Bulb for Heating, Cooling, Mixing and By-Pass Applications Powers # Regulators With Powers # Self-Operating Temperature Regulators, you no longer need external

More information

Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body

Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body Flowrite VF 599 Series Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body VF 599-1 Description Features Application The Flowrite VF 599 series two-way valves are designed to work with either a pneumatic

More information

Built-in Slam-Shut Valve. Independent pneumatic control Accuracy class: ±5% Response time: 1 second. 1/2, 11/16, and 3/4-inch (13, 18, and 19 mm)

Built-in Slam-Shut Valve. Independent pneumatic control Accuracy class: ±5% Response time: 1 second. 1/2, 11/16, and 3/4-inch (13, 18, and 19 mm) RP Series Regulators Introduction The RP Series regulators are direct-operated with non-balanced trim. Normally they are fitted with a built-in filter. They are produced in the following versions: Types

More information

Paramax Series Control Ball Valve. Specification Data CM6004 7/97

Paramax Series Control Ball Valve. Specification Data CM6004 7/97 Paramax Control Ball Valve Specification Data CM6004 7/97 Table of Contents Numbering System........................ 3 Specifications............................ 4 Seal Ring Limitations......................

More information

Series 240 Pneumatic On-off Valve Type 3351

Series 240 Pneumatic On-off Valve Type 3351 Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal

More information

Technical Data PRESSURE (PSI) DIMENSIONS inches AND WEIGHTS pounds

Technical Data PRESSURE (PSI) DIMENSIONS inches AND WEIGHTS pounds Technical Data SD 8010A SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 PRINTED IN U.S.A. SD 8010A/0103 G 5" ACTUATOR REMOVAL CLEARANCE F 1/4 NPT A INTIMIDATOR TYPE J CONTROL

More information

Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body

Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Flowrite 599 Series Three-Way s 1/2 to 2-inch Bronze Body Technical Instructions Document No. 155-185P25 VF 599-4 Description The Flowrite VF 599 Series ANSI Class 250 three-way valves are designed to

More information

SECTION METERS AND GAGES FOR PLUMBING PIPING

SECTION METERS AND GAGES FOR PLUMBING PIPING PART 1 GENERAL 1.01 SECTION INCLUDES A. Positive displacement meters. B. Flow meters. SECTION 22 0519 METERS AND GAGES FOR C. Pressure gages and pressure gage taps. D. Thermometers and thermometer wells.

More information

Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body

Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body PRODUCT NO. MODEL LANDIS & STAEFA ASSEMBLED IN U.S.A. Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-185P25 VF 599-4 Cv VF186R1 Description The Flowrite VF 599 Series

More information

CONTROL VALVE STANDARD SPECIFICATION

CONTROL VALVE STANDARD SPECIFICATION CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change

More information

Python Series Control Valves

Python Series Control Valves s When accurate control is desired from your steam or water applications the Armstrong Python 1100 Series Control Valve will squeeze every bit of performance out of your system and deliver precise control.

More information

Temperature Regulators

Temperature Regulators Temperature Regulators DESIGN & OPERATION DIAL THERMOMETER (Model 91400 only) BELLOWS OVERRANGE PROTECTION SPRING CAPILLARY TUBING CONNECTION SENSING BULB RANGE ADJUSTMENT SPRING CAP ADJUSTMENT SCREW BUSHING

More information

SPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves

SPIRA-TROL 1/2 to 4 ANSI Two-port KEA, KFA and KLA Control Valves 1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in

More information

Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.

Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators. Mark 50 Series Self-Operated Back Pressure Regulators The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint. The spring in the Mark 50 holds

More information

SOLENOID CONTROL VALVE

SOLENOID CONTROL VALVE PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard

More information

Powermite 599 Series MT Series Terminal Unit Three-way Valves

Powermite 599 Series MT Series Terminal Unit Three-way Valves Technical Instructions Document No. 155-197P25 VF 599-6 May 2, 28 Powermite 599 Series MT Series Terminal Unit Three-way Valves VF216R1 Description The Powermite Series ANSI Class 2 MT Series three-way

More information

58OO SERIES 5800 PRODUCT SPEC PNEUMATIC ACTUATED INDUSTRIAL VALVES COMPACT GLOBE CONTROL VALVES SIZES: 1/2 TO 4 INCHES PRODUCT SPECIFICATION

58OO SERIES 5800 PRODUCT SPEC PNEUMATIC ACTUATED INDUSTRIAL VALVES COMPACT GLOBE CONTROL VALVES SIZES: 1/2 TO 4 INCHES PRODUCT SPECIFICATION PNEUMATIC ACTUATED INDUSTRIAL VALVES COMPACT GLOBE CONTROL VALVES PRODUCT SPECIFICATION SERIES 58OO SIZES: 1/2 TO 4 INCHES 5800 PRODUCT SPEC Two-Way, Linear, Steel or Stainless Steel Body Valves for Process

More information

Wafer Silent Check Valves

Wafer Silent Check Valves Applications Liquid Service Metals & Mining Process Industry Water & Waste Water Power Industry Pulp & Paper Chemical Industry Oil & Gas Wafer Silent Check Valves Pressures to 740 PSIG Temperatures to

More information

V January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell

V January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell V5011. January 2016 SINGLE SEATED V5011 SERIES Previously manufactured by Dezurik and Honeywell Description: 2 ½ to 6 class 5 with cast iron body, bronze trim and composite seat, ideally suited for low

More information

LCS6822 (Class 150) LCS7822 (Class 300)

LCS6822 (Class 150) LCS7822 (Class 300) Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications

More information

YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000

YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000 Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating

More information

PRESSURE RELIEF / SUSTAINING CONTROL VALVES

PRESSURE RELIEF / SUSTAINING CONTROL VALVES PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART

More information

ANSI version. The valve closes when the differential pressure rises

ANSI version. The valve closes when the differential pressure rises Self-operated Regulators Series 42 Differential Pressure Regulator with Type 2424/Type 2428 Actuator and Type 2422 Valve Type 42-24 A Type 42-24 B Type 42-28 A Type 42-28 B ANSI version Application For

More information

Mercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No.

Mercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No. SECTION 23 22 13 STEAM AND CONDENSATE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification

More information

Cash Valve B SERIES PRESSURE REGULATORS. ISSUED - JANUARY 1999 CAVMC-0509-US-0208 ISO 9001 Certified

Cash Valve B SERIES PRESSURE REGULATORS. ISSUED - JANUARY 1999 CAVMC-0509-US-0208 ISO 9001 Certified Cash Valve B SERIES REGULATORS ISSUED - JANUARY 1999 CAVMC-09-US-0208 ISO 9001 Certified GENERAL INFORMATION / REGULATORS B SERIES VALVES DESCRIPTION The Cash Valve Series B pressure reducing and regulating

More information

VA, VF, and VS Series Direct Mounted Globe Valve Assemblies. Application. Features

VA, VF, and VS Series Direct Mounted Globe Valve Assemblies. Application. Features TAC 1354 Clifford Avenue P.O. Box 2940 Loves Park, Illinois 61132-2940 www.invensysibs.com Two-Way and Three-Way Globe Valve Assemblies with 220 lbf Linear (979 N) Spring Return DuraDrive Actuators Submittal

More information

Kunkle Models 91/218/228 liquid relief valves Safety and relief products

Kunkle Models 91/218/228 liquid relief valves Safety and relief products Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from

More information

MECHANICAL LEVEL CONTROLS

MECHANICAL LEVEL CONTROLS PISTON BALANCED LEVER OPERATED APPLICATIONS: As oil or water dump valves on separators, treaters, knockouts, and other similar accumulators where higher pressures may occur FEATURES: Balanced, single soft

More information

PRESSURE REDUCING CONTROL VALVES

PRESSURE REDUCING CONTROL VALVES PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL

More information

Series 8500 Grayline Butterfly Valves

Series 8500 Grayline Butterfly Valves Series 8500 Grayline Butterfly Valves Features State-of-the-Art Manufacturing: Valves are produced using state-of-the-art manufacturing equipment. Each valve is tested to 110% of rated working pressure

More information

Pilot Operated 2-Way Gas Valves

Pilot Operated 2-Way Gas Valves Pilot Operated 2-Way Gas Valves Model 2180ED - ductile iron Model 2180ES - cast steel Overview AMOT Model 2180 valves will shut off the fuel gas and vent the manifold when used on an internal combustion

More information

Bushing Viton O-ring (Other material available) Anti-Static Device

Bushing Viton O-ring (Other material available) Anti-Static Device API 607-6th Edition Triac unibody flanged ball valves feature a high quality investment cast body and end. They are available in 1/2 through 6 regular port. Superior leak protection is accomplished by

More information

LIL GATOR TYPE VLG CONTROL VALVE SIZES ½ THROUGH 2

LIL GATOR TYPE VLG CONTROL VALVE SIZES ½ THROUGH 2 12501 Telecom Drive, Tampa Florida 33637 Installation, Operating and Maintenance Instructions Supplement 10/1.5.2 Rev. 1 LIL GATOR TYPE VLG CONTROL VALVE SIZES ½ THROUGH 2 TABLE OF CONTENTS OPERATING PRINCIPLE...5

More information

High Performance Butterfly Valves

High Performance Butterfly Valves Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6

More information

Jordan Control Valve Series

Jordan Control Valve Series Jordan Control Valve Series JCVS Globe Style Control Valves Mark ED and ET Globe Style Control Valves The Mark ED and ET are single port, globe style bodies with composition or metal seats, and a balanced

More information

MNSD-V MULTIPLE NOZZLE SPRAY DESUPERHEATER BULLETIN 1144 SEPTEMBER 2001

MNSD-V MULTIPLE NOZZLE SPRAY DESUPERHEATER BULLETIN 1144 SEPTEMBER 2001 MNSD-V MULTIPLE NOZZLE SPRAY DESUPERHEATER BULLETIN 1144 SEPTEMBER 2001 MNSD V MULTIPLE NOZZLE SPRAY DESUPERHEATER Multiple Nozzle Spray Desuperheater Offers High Temperature Capabilities and Low Class

More information

Python 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON

Python 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON Python 1500 Series Control Valves Pneumatic and Electric Actuators PYTHON - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing

More information

CONTROL VALVE

CONTROL VALVE CONTROL VALVE 30 000 GENERALS The valves serial "30 000" are designed for a range of general-purpose pneumatic controlled valves. Their application extends over the most various industrial branches: food,

More information

Fisher Sliding-Stem Valve Selection Guide

Fisher Sliding-Stem Valve Selection Guide Sliding-Stem Valve Selection Guide Product Bulletin Fisher Sliding-Stem Valve Selection Guide W8861 W7957-2 X0165 GX easy-e Typical Fisher Sliding-Stem Control Valves TBX STEAM CONDITIONING VALVE A broad

More information

Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:

Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP: VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.

More information

HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES

HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES BFV-2 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Rev. 09/09 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Now you can turn high pressure applications into low risk decisions by turning to high performance

More information

Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI

Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical

More information

PRESSURE REGULATORS GAS BACK PRESSURE. APPLICATION: Vent lines on oil separators, flow treaters, compressor stations, gas gathering systems.

PRESSURE REGULATORS GAS BACK PRESSURE. APPLICATION: Vent lines on oil separators, flow treaters, compressor stations, gas gathering systems. GAS BACK PRESSURE APPLICATION: Vent lines on oil separators, flow treaters, compressor stations, gas gathering systems. CERTIFICATIONS: Canadian Registration Number (CRN): 0C16234.24567890NTY (Ductile)

More information

DBO(Y)(S)-3 CONTROL VALVE SIZES 2" 8" ANSI CLASS 125/250, 150/300, 600

DBO(Y)(S)-3 CONTROL VALVE SIZES 2 8 ANSI CLASS 125/250, 150/300, 600 APPLICATION DATA Control systems for food, pulp and paper, chemical, petrochemical, power & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such

More information

PRESSURE REGULATORS LIQUID BACK PRESSURE

PRESSURE REGULATORS LIQUID BACK PRESSURE LIQUID BACK PRESSURE APPLICATION: Control back pressure in liquid packed systems where an auxiliary source of supply gas pressure is available. SUPPLY PRESSURE: Equal to or not less than 60% of controlled

More information

Model 788DVC DIGITAL CONTROL VALVES

Model 788DVC DIGITAL CONTROL VALVES Model 788DVC DIGITAL CONTROL VALVES DESCRIPTION The Model 788DVC Digital Control Valve is designed to provide precise flow rate control and batch delivery of fluid products when used with an electronic

More information

Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.

Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards. VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60

More information

Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526

Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil

More information

W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection

W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2

More information

GE Oil & Gas. Technical Specifications 07/ Series. Masoneilan * High Performance Butterfly Valves (HPBV)

GE Oil & Gas. Technical Specifications 07/ Series. Masoneilan * High Performance Butterfly Valves (HPBV) GE Oil & Gas Technical Specifications 07/2014 39003 Series Masoneilan * High Performance Butterfly Valves (HPBV) 2 GE Oil & Gas Table of Contents Foreword...3 Features...4 Numbering System...5 General

More information

NE January 2016 THREE-WAY VALVES SERIES 1600 MODEL 1601 SERIES 1900 MODEL Previously manufactured by Dezurik and Honeywell

NE January 2016 THREE-WAY VALVES SERIES 1600 MODEL 1601 SERIES 1900 MODEL Previously manufactured by Dezurik and Honeywell 516.01-3NE January 2016 THREE-WAY VALVES SERIES 1600 MODEL 1601 SERIES 1900 MODEL 1901 Previously manufactured by Dezurik and Honeywell Description: Models 1601 and 1901 three-way valves combine with pneumatic,

More information

Distributed by: M&M Control Service, Inc brands you trust.

Distributed by: M&M Control Service, Inc brands you trust. Distributed by: M&M Control Service, Inc. /stockham.php 800-876-0036 847-356-0566 brands you trust. STOCKHAM - Cast Valves Contents Performance in Any Application...4 How to Specify and Order Valves...4

More information

Mark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available

Mark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available Mark 60 Series Self Operated Pressure Regulators The Mark 60 Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark 60 holds the

More information

AIL METSEAL Butterfly Valves

AIL METSEAL Butterfly Valves AIL METSEAL Butterfly s The AIL METSEAL Butterfly is a high performance valve which is used for positive isolation in Power Generation, Petroleum Refining, Oil and Gas Production, Chemical, Petrochemical

More information

SECTION PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL

SECTION PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL SECTION 22 10 10 PLUMBING PIPING VALVES AND ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and

More information

PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated

PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...

More information

HIGH PERFORMANCE BUTTERFLY VALVE

HIGH PERFORMANCE BUTTERFLY VALVE Figure HPA BUTTERFLY VALVES Features: Bi-directional Bubble-tight Shutoff Suitable for Saturated Steam Service to 150 PSI Angled Disc Available in Wafer (3 to 12 ) or Lug (3 to 24 ) Stocked in Carbon by

More information

Valve Selection. 1. Function and service considerations

Valve Selection. 1. Function and service considerations 1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.

More information

THREE-PIECE BALL VALVES H-500 SERIES

THREE-PIECE BALL VALVES H-500 SERIES THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel

More information

PRESSURE RELIEF VALVES AND ACCESSORIES FOR A WIDE RANGE OF COMMERCIAL AND INDUSTRIAL APPLICATIONS. safety and relief valve catalog

PRESSURE RELIEF VALVES AND ACCESSORIES FOR A WIDE RANGE OF COMMERCIAL AND INDUSTRIAL APPLICATIONS. safety and relief valve catalog PRESSURE RELIEF VALVES AND ACCESSORIES FOR A WIDE RANGE OF COMMERCIAL AND INDUSTRIAL APPLICATIONS safety and relief valve catalog Table of Contents PRODUCTS Valve Selection Guide.......................................................................

More information

Butterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax:

Butterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax: Butterfly Valves Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: 519-759-3911 Tel: 800-563-6302 Fax: 519-759-7970 www.craneenergy.com A Crane Co. Company Butterfly Valves Ordering Information

More information

Application & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump

Application & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump Section 914 Page 101 Supersedes Section 913 Page 101 Dated November 1, 199p Application & Reference Data Typical Specifications Section 914 Section 914 Page 102 Supersedes Section 913 Page 102 Dated November

More information

SAMPLE PRODUCT SPECIFICATIONS

SAMPLE PRODUCT SPECIFICATIONS SAMPLE PRODUCT SPECIFICATIONS Thermometers & Gauges Product Guide Specification THERMOMETERS & GAUGES Specifier Notes: This section covers Miljoco Corporation thermometers and pressure gauges suitable

More information

CP400 Series Commercial/Industrial Pressure Loaded Pressure Reducing Regulators

CP400 Series Commercial/Industrial Pressure Loaded Pressure Reducing Regulators CP400 Series Commercial/Industrial Pressure Loaded Pressure Reducing Regulators September 2014 P1182 typical type cp400 regulator P1522 P1410 Typical type CP403 Regulator WITH INTEGRAL TRUE-MONITOR PROTECTION

More information

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves

More information

Series Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.

Series Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications. 7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on

More information

cs200 series commercial / Industrial pressure reducing regulators

cs200 series commercial / Industrial pressure reducing regulators November 2013 cs200 series commercial / Industrial pressure reducing regulators P1188 Figure 1. Typical CS200 Series Pressure Reducing Regulator Features and Benefits Wide Range of Body Sizes and End Connections

More information

2/2 ) % ) % ) Assemblies. Solenoid and Piloted Piston Valve Series Condensate Drain Valve Assemblies. Brass or Stainless Steel Bodies 1/4" to 1" NPT

2/2 ) % ) % ) Assemblies. Solenoid and Piloted Piston Valve Series Condensate Drain Valve Assemblies. Brass or Stainless Steel Bodies 1/4 to 1 NPT 4 Solenoid and Piloted Piston Series Condensate Drain Brass or Stainless Steel Bodies 1/4" to 1" NPT 2/2 Features Designed to automatically drain condensate in compressed air systems Piloted piston assemblies

More information

BR 10a Control and Shut-off Butterfly valve

BR 10a Control and Shut-off Butterfly valve M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with

More information

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

Series 2200 and 2220 Control Valves

Series 2200 and 2220 Control Valves Series 2200 and 2220 Control Valves Space-Saving Solution: Yokeless design fits tight separator and scrubber applications Series 2200 Series 2220 Norriseal Series 2200 and 2220 control valves have been

More information

Quality Components For The Most Demanding Refrigeration Systems.

Quality Components For The Most Demanding Refrigeration Systems. Quality Components For The Most Demanding Refrigeration Systems. J K EVAPORATOR I H A B CONDENSER G F D C HEAT RECLAIM D E A B C D E F Compressor Valve, pg. 6 Way Actuated Ball Valve/Heat Reclaim, pg.

More information

P200 Pressure Regulator

P200 Pressure Regulator P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,

More information

ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)

ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) BRASS OR STAINLESS STEEL BODY POLYMER OR METAL ACTUATOR HERION USA Inc. Valve Technology and Systems Brochure N-285 Multi-Accessory Polymer Head versions Increased

More information

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135

More information

Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x Technical Data...3

Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x Technical Data...3 Special Purpose Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x 20...2 Technical Data...3 Triple Duty Valve - Iron Body Style TDV 125# Flanged 2-20...4 Technical Data...5 Pressure

More information

KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS

KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy

More information

Keystone Figures 310/312 K-LOK Butterfly Valves

Keystone Figures 310/312 K-LOK Butterfly Valves 310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,

More information

Fisher 8532 High-Performance Butterfly Valve

Fisher 8532 High-Performance Butterfly Valve 8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.

More information

Triple Eccentric Control and Shut-off Butterfly Valve Series 14t

Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400

More information

Worldwide Contacts.

Worldwide Contacts. Worldwide Contacts www.tyco-fire.com DV-5 Remote-Resetting, Pressure-Reducing Deluge Valve, Limited Space Valve Cabinet General Description The TYCO DV-5 Remote-Resetting, Pressure-Reducing Deluge Valve,

More information

Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve

Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal

More information

3-WAY MIXING, BRONZE BODY

3-WAY MIXING, BRONZE BODY HEAVY DUTY BRONZE GLOBE CONTROL VALVES WM 3-WAY MIXING, BRONZE BODY 1/2, 3/4, 1, 1-1/4, 1-1/2, and 2 Screwed NPT Ends ANSI Class 125 or 250 Body Rating ANSI Class IV Close off Bronze Trim with EP or Teflon

More information

Patented S2 TM Stem Seal. Dual Body Seal. Fugitive Emissions Control.

Patented S2 TM Stem Seal. Dual Body Seal. Fugitive Emissions Control. Patented S TM Stem Seal s Dual Body Seal Fugitive Emissions Control Antistatic electrical continuity between ball, stem, and body. Locking washer Blowout proof stem. Live loaded packing assures reliable

More information

Flow Limit Safety Shutoff Valves Model 1

Flow Limit Safety Shutoff Valves Model 1 Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally

More information

Product Catalogue November 2017

Product Catalogue November 2017 Product Catalogue November 207 Manual and Actuated Valves It s all at Albion Contents Brass 4 Ball Valves Way Valves Check Valves Gate Valves Strainers Press Valves 9 Ball Valves Check Valves Strainer

More information

PIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5

PIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5 PERFORMANCE SPECIFICATIONS PIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5 PIC-V Valve 1. PRESSURE INDEPENDENT ACTUATED BALL VALVES AND CARTRIDGE (PIC-V)

More information

310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve

310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve 310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws

More information

Introduction. Resilient Seat Butterfly Valves. Valves D-207.

Introduction. Resilient Seat Butterfly Valves. Valves D-207. Introduction Resilient Seat Butterfly D-207 Resilient Seat Butterfly are now available in sizes up to 20-inches. Excellent for isolation applications, two-way and floating Butterfly provide 2-position

More information

Model MVR. Model MVR. Materials and Specifications. Magnetic Drive Vertical Turbine Meters Sizes 3/4", 1", 1-1/2", 2", 3", 4" and 6" Features

Model MVR. Model MVR. Materials and Specifications. Magnetic Drive Vertical Turbine Meters Sizes 3/4, 1, 1-1/2, 2, 3, 4 and 6 Features Magnetic Drive Vertical Turbine Meters Sizes 3/4", 1", 11/2", 2", 3", 4" and 6" Features APPLICATIONS: Measurement of water for residential, commercial, industrial and residential fire applications, where

More information