Choice of body materials Cast iron, carbon steel, chrome moly, forged steel, stainless steel, bronze.
|
|
- Noah Cox
- 6 years ago
- Views:
Transcription
1
2 Strainer Tight seating Both ends of the chamber are precisely machined to provide perfectly round and smooth seating surfaces as well as fixed chamber length. The screen seats snugly on the machined surface so no particle larger than the screen opening can escape around the end of the screen. Choice of body materials Cast iron, carbon steel, chrome moly, forged steel, stainless steel, bronze. Connection configurations available Select screwed, socketweld or flanged. Choice of mesh 30 x 30 (CA Series strainers only) or 0,045'' perforated stainless steel screens. Other screen materials, meshes and perforations available. Easy-in, easy-out screwed screen retainers Straight threads mean less torque is required to obtain a tight seal with proper gasket compression, and less torque is required to remove the retainer. The danger of freezing in is considerably less than with hard-tobreak tapered pipe threads. S-296
3 Armstrong Y-Type Design Advantages No-Leak, No-Crush Chambers are assured by precise machining of both ends of the chamber to provide perfectly round and smooth seating surfaces as well as fixed chamber length. The screen seats snugly on the machined surface so no particle larger than the screen opening can escape around the end of the screen. Easy-In, Easy-Out Screwed Retainers have straight threads. Less torque is required to obtain a tight seal with proper gasket compression. Less torque is required to remove the retainer. The danger of freezing in is considerably less than with hard-to-break tapered pipe threads. Off-Center Blowdown Connections for 2 1/2'' and 3'' size strainers. The off-center drain permits nearly complete removal of liquid and dirt when blowing down the strainer. And less liquid spills when removing the screen retainer. How To Order Model Number A FL 125 CONNECTION SIZE (inches) BODY MATERIAL CA = Cast Iron ASTM A48 Cl. 30 (Screwed 1/2'', 3/4'', 1'', 1 1/4'', 1 1/2'', 2'') A = Cast Iron ASTM A48 Cl. 30 (Screwed 2 1/2'', 3'') B = Cast Carbon Steel ASTM A216 Gr. WCB C = Cast Chrome Moly Steel ASTM A217 Gr. WC6 D = Forged Steel ASTM A182 Gr. F22 E = Cast 316 Stainless Steel ASTM A351 Gr. CF8M F = Cast Bronze ASTM B62 SC = Screwed FL = Flanged SW = Socketweld ANSI FLANGE CLASS CONNECTION CONFIGURATION SCREEN MATERIAL Please refer to table at top of page S-301 for applicable screen code. S-297
4 ID Charts Table S Armstrong Illustration Model Connection Size Connection Type Body Material Pressure Temperature Ratings Steam Non-shock Cold Non-shock Located on Page CA, 3/4", 1",, 1, 2" S-302 Screwed C C A 2, 3" S-302 A 2" Cast Iron ASTM-A48 Class 30 Class 125 Flanged 8,6 178 C C A 2-10" S-303 A 2" Class 250 Flanged C C A 2-8" B, 3/4", 1" Screwed & Socketweld 900 lb C C S-304 B, 1, 2", 3" Screwed & Socketweld 600 lb C C B, 3/4", 1" B, 1, 2", 3" B 4", 6" B, 3/4", 1" B, 1, 2", 3" B 4", 6" Class 150 Flanged C C Cast Carbon Steel ASTM-A216 Gr. WCB Class 300 Flanged C C S-305 B, 3/4", 1" B, 1, 2", 3" B 4" Class 600 Flanged C C C, 3/4", 1" C C Screwed & Socketweld lb C, 1, 2" C C Cast Chrome Moly Steel ASTM-A217 Gr. WC6 C, 3/4", 1" C C S-306 Class Flanged C, 1, 2" C C D, 3/4", 1",, 1, 2" Socketweld lb Forged Steel ASTM-A182 Gr. F C C S-307 S-298
5 ID Charts Table S Armstrong Illustration Model Connection Size Connection Type Body Material Pressure Temperature Ratings Steam Non-shock Cold Non-shock Located on Page E, 3/4", 1" Screwed & Socketweld lb C C S-308 E, 1, 2", 3" E, 3/4", 1" E 1, 2", 3" E 4", 6" E, 3/4", 1" E 1, 2", 3" E 4", 6" E, 3/4", 1" E 1, 2", 3" E 4" Screwed & Socketweld 600 lb C C Cast Stainless Steel Class 150 Flanged ASTM-A351 Gr. CF8M C C Class 300 Flanged C C Class 600 Flanged C C S-309 F, 3/4", 1", Screwed 300 lb Cast Bronze ASTM-B C C S-310 F 1, 2" All models comply with the Pressure Equipment Directive PED 97/23/EC. For details, see specific product page or Armstrong PED Certificate. S-299
6 Notes S-300
7 Data Table S Material Availability and Particle Retention Size Specification Perforated Mesh Particle Retention mm Back-Up Required Materials 304 SS Monel Brass 316 SS 1/64" 0,4064 3" 10" Code 10 Code 18 1/32" 0,7874 None Code 11 Code 19 Code 31 0,045 (3/64") 1,1430 None Code 1 Code 3 Code 4 Code 7 1/16" 1,5748 None Code 12 Code 32 1/8" 3,1750 None Code 8 Code 21 Code 28 Code 33 3/16" 4,7752 None Code 13 Code 22 Code 34 1/4" 6,3500 None Code 14 Code 23 Code x 20 0,8636 6" 10"* Code 15 Code 5** 24 x 110 0,1422 5" 10" Code 24 Code 2 30 x 30 0,5080 None Code 41 (1) 40 x 40 0, " Code 16 Code 6 Code x 100 0,1397 All sizes Code 9 Code 25 Code x 150 0,1041 All sizes Code x 200 0,0737 All sizes Code 17 Code 39 * Except 6" 125 lb cast iron ** On Code 5 2 thru 10 " require back-up screen Shade indicates only available screen choices for CA Series. (1) 30 x 30 mesh screen only available for CA Series. Table S Ratio of Open Area of to Inside Area of Pipe Strainer Total Inside Area of Ratio Perforated s Ratio Wire Mesh s Size Area, cm² Pipe, cm² 1/64" 1/32" 0,045" 1/16" 1/8" 3/16" 1/4" 24 x x x x x x ,45 1,94 5,2 5,0 6,4 (5) 5,2 6,9 (5,4) 8,8 10,0 4,8 (3,8) 6,6 7,2 5,2 (4,1) 2,2 (1,8) 2,5 3/4" 46,45 3,42 4,0 3,9 5,0 4,0 5,4 6,9 7,8 3,8 5,3 7,2 4,1 1,8 2,0 1" 70,97 5,55 3,8 3,7 4,7 3,8 5,1 6,5 7,4 3,7 5,2 11,0 4,0 1,7 1,9 102,6 9,61 3,2 3,0 3,9 3,2 4,2 5,4 6,1 3,2 4,4 3,4 1,5 1, ,3 13,10 3,4 3,3 4,3 3,4 4,6 5,9 6,7 3,5 4,8 23,6 2,8 1,6 1,8 2" 221,9 21,61 3,0 2,9 3,8 3,0 4,1 5,2 5,9 3,2 4,4 34,4 2,6 1,5 1, ,0 30,84 3,4 3,3 4,2 3,4 4,5 5,8 6,6 3,3 3,5 2,7 1,7 1,9 3" 125# 477,4 47,68 1,7 2,9 3,7 3,0 4,0 5,1 5,8 2,9 3,1 2,3 1,5 1,7 3" 250# 561,3 47,68 2,0 3,4 4,3 3,5 4,7 6,0 6,8 3,5 3,8 2,8 1,8 2,0 4" 125# 793,5 81,94 1,7 2,8 3,5 2,9 3,8 4,9 5,6 2,8 3,0 2,3 1,5 1,6 4" 250# 935,5 81,94 2,0 3,3 4,2 3,4 4,5 5,8 6,6 3,4 3,7 2,1 1,8 2,0 6" 125# ,5 1,6 2,7 3,4 2,8 3,1 4,8 5,4 1,6 3,0 1,8 1,5 1,6 6" 250# ,5 1,9 3,1 4,0 3,2 4,3 5,5 6,3 1,9 2,7 2,1 1,7 1,9 8" 125# ,6 1,6 2,6 3,4 2,7 3,7 4,7 5,3 1,6 2,3 1,8 1,5 1,7 8" 250# ,6 1,9 3,1 4,0 3,3 4,4 5,6 6,3 2,0 2,8 2,1 1,8 2,0 10" 125# ,4 1,6 2,7 3,4 2,7 3,7 4,7 5,4 1,7 2,3 1,8 1,5 1,7 Percentage Open Area 30%* 29% 37% 30% 40% 51% 58% 33%* 46%* 37% 36%* Notes: Cast steel, stainless steel and bronze strainers have the same ratios as 250 lb cast iron. This table does not apply to the Forged Steel F22 on page S-307. Numbers in parentheses apply to CA cast iron series only. * For unbacked screens. Back-up required, Monel only. Shade indicates that back-up screens are required. S-301
8 Cast Iron 250 lb Screwed 1/2'' - 3'' CA1SC/CA41SC, 3/4", 1", 1, 2" CA1SC/CA41SC A1SC 2, 3" Pressure/Temperature Rating Pressure, barg Temperature, C Table S Materials: 250 lb Screwed - 3" Connection Size Body Standard Retainer Gasket Bolting in, 3/4" ASTM A48 30x30 SS Mesh or 304 SS ASTM A48 Spiral wound 1", 1, 2" N/A Class 30 0,045" perforated Class 30 Soft Steel Cast Iron Cast Iron 2, 3" 304 SS 0,045" perforated Non-asbestos Cap Screws ASTM A193 Gr. B7 Note: Other screen materials available. See page S-301. Table S Physical Data: 250 lb Screwed - 3" Connection Size Ordering Code, Standard Weight Dimensions A B C Saturated Steam Maximum Pressure 66 C non-shock in kg mm mm in bar bar 3/4" 1, /8" 1" CA1SC 2, CA41SC 3, , " 6, , /4" A1SC 3" 21, All sizes comply with the article 3.3 of the PED (97/23/EC). Retainer Type Threaded Bolted Connections ANSI B Screwed All dimensions and weights are approximate. Use certified print for exact dimensions. Design and materials are subject to change without notice. S-302
9 Cast Iron Class 125 Flanged 2'' - 10'' and Class 250 Flanged 2'' - 8'' 2'' Class 125 or 250 Flanged 2 1/2'' - 10'' Class 125 Flanged, 2 1/2'' - 8'' Class 250 Flanged Table S Materials: Class 125 Flanged 2" - 10" and Class 250 Flanged 2" - 8" Connection Size Body Retainer Gasket Bolting Standard screen in 2" ASTM A48 N/A Soft Steel 304 SS 0,045" perforated 2, 3", 4", 6", 8" Class 30 Cap Screws ASTM A193 10" Class 125 Only Cast Iron Non-asbestos 304 SS 1/8" perforated Note: Other screen materials available. See page S-301. Table S Physical Data: Class 125 Flanged 2" - 10" and Class 250 Flanged 2" - 8" Connection Ordering Dimensions Maximum Pressure Size Code, Weight Saturated 66 C A B C Retainer Standard Steam non-shock Type in kg mm mm in bar bar 2" Threaded /4" A1FL 125 8,6 12 3" Bolted 4" " A1FL 125 8" " 8,6 12 Bolted 10" A8FL " 2" A1FL Threaded /4" 3" " A1FL Bolted 6" " " Shade indicates products that are CE Marked according to the PED (97/23/EC). All the other sizes comply with the Article 3.3 of the same directive. Connection Class 125 ANSI B16.1 Flat Faced Class 250 ANSI B16.1 1/16" RF All dimensions and weights are approximate. Use certified print for exact dimensions. Design and materials are subject to change without notice. S-303
10 Cast Carbon Steel (WCB) 600 lb and 900 lb Screwed or Socketweld 1/2'' - 3'' 900 lb B1SC/B1SW 1/2'', 3/4'', 1'' 600 lb B1SC/B1SW 1 1/4'', 1 1/2'', 2'', 3'' Pressure/Temperature Rating - 3/4" - 1" Scrd. & SW Pressure, barg - 3" Scrd. & SW, - 4" Cl. 600 Flanged - 6" Cl. 300 Flanged - 6" Cl. 150 Flanged Temperature, C Table S Materials: 600 lb and 900 lb Screwed or Socketweld - 3" Connection Size in Body Retainer Gasket Bolting Standard, 3/4" ASTM A108 Gr Soft Steel N/A 1" ASTM A216 ASTM A108 Gr Gr. WCB 304 SS Spiral Wound Studs ASTM A193 Gr. B7, 1, 2" ASTM A216 Gr. WCB Non-asbestos Nuts ASTM A194 Gr. 2H 3" Non-asbestos Cap screws ASTM A193 Gr. B7 Note: Other screen materials available. See page S SS 0,045" Perforated Table S Physical Data: 600 lb and 900 lb Screwed or Socketweld - 3" Dimensions Connection Ordering Code Weight Size Standard A B C Maximum Pressure Saturated Steam 38 C non-shock Retainer Type in Screwed SW kg mm mm in bar bar 1, /8" 3/4" B1SC B1SW 1, " 2, , , B1SC B1SW 2" 9, Bolted 3" 21, Connections Threaded ANSI B Screwed Shade indicates products that are CE Marked according to the PED (97/23/EC). All the other sizes comply with the Article 3.3 of the same directive. ANSI B16.11 Socketweld All dimensions and weights are approximate. Use certified print for exact dimensions. Design and materials are subject to change without notice. S-304
11 Cast Carbon Steel (WCB) Class 150, 300 Flanged 1/2'' - 6'' and Class 600 Flanged 1/2'' - 4'' B1FL 1/2'', 3/4'', 1'' B1FL 1 1/4'', 1 1/2'', 2'', 3'' B1FL 4'', 6'' Table S Materials: Class 150, 300 Flanged - 6" and Class 600 Flanged - 4" Connection Size Body Retainer Gasket Bolting in, 3/4" ASTM A108 Soft Steel N/A 1" Gr ASTM A216, 1, 2" Gr. WCB 304 SS Spiral wound Studs ASTM A193 Gr. B7 ASTM A216 Non-asbestos Nuts ASTM A194 Gr. 2H Gr. WCB 3", 4", 6" Non-asbestos Cap Screws ASTM A193 Gr. B7 Note: Other screen materials available. See page S-301. Standard screen 304 SS 0,045" Perforated Table S Physical Data: Class 150, 300 Flanged - 6" and Class 600 Flanged - 4" Connection Ordering Dimensions Maximum Pressure Size Code, Weight Saturated 38 C A B C Retainer Standard Steam non-shock Type in kg mm mm in bar bar 2, /8" 3/4" 4, Threaded 1" 4, B1FL 150 7, , Bolted 2" 13, " 37, " B1FL , Bolted 6" 125, , /8" 3/4" 5, Threaded B1FL " 6, , Bolted 1 12, " 15, " B1FL , Bolted 4" 59, " 137, , /8" 3/4" B1FL 600 5, Threaded 1" 6, , , " B1FL , Bolted 3" 43, " 69, Note: For pressure/temperature ratings, see page S-304. Shade indicates products that are CE Marked according to the PED (97/23/EC). All the other sizes comply with the Article 3.3 of the same directive. Flanges Class 150 ANSI B16.5 1/16" RF Class 300 ANSI B16.5 1/16" RF Class 600 ANSI B16.5 1/4" RF All dimensions and weights are approximate. Use certified print for exact dimensions. Design and materials are subject to change without notice. S-305
12 Cast Chrome Moly Steel (WC6) lb Screwed, Socketweld and CI Flanged 1/2'' - 2'' C1SC/C1SW 1/2'', 3/4'', 1'' C1SC/C1SW 1 1/4'', 1 1/2'', 2'' C1FL 1/2'', 3/4'', 1'' Pressure/Temperature Rating - 1-2" Pressure, barg - 3/4" - 1" C1FL 1 1/4'', 1 1/2'', 2'' Temperature, C Table S Materials: lb Screwed, Socketweld and Class Flanged - 2" Connection Size in Body Retainer Gasket Bolting Standard, 3/4", 1" ASTM A276 Soft Steel N/A ASTM A217, 1, 2" Gr. WC6 ASTM A217 Gr. WC6 Note: Other screen materials available. See page S L SS Spiral Wound Non-asbestos Studs ASTM A193 Gr. B16 Nuts ASTM A194 Gr. 2H 304 SS 0,045" perforated Table S Physical Data: lb Screwed, Socketweld and Class Flanged - 2" Dimensions Connection Ordering Code Weight Size Standard A B C Maximum Pressure Saturated Steam 38 C non-shock in Screwed SW kg mm mm in bar bar C1SC C1SW 1, /8" 3/4" C1SC C1SW 1, " C1SC C1SW 2, C1SC C1SW* 8, /4" 1 C1SC C1SW* 8, /4" 2" C1SC C1SW* 11, " C1FL , /8" 3/4" C1FL , " C1FL , C1FL 1500* 17, /4" 1 C1FL 1500* 20, /4" 2" C1FL 1500* 35, " Retainer Type Threaded Bolted Threaded Bolted * Socketweld Blowdown Connections. Shade indicates products that are CE Marked according to the PED (97/23/EC). All the other sizes comply with the Article 3.3 of the same directive. Connections ANSI B Screwed ANSI B16.11 Socketweld Class 1500 ANSI B16.5 1/4" RF All dimensions and weights are approximate. Use certified print for exact dimensions. Design and materials are subject to change without notice. S-306
13 Forged Steel (F22) lb Socketweld 1/2'' - 2'' D1SW 1/2'' - 2'' Pressure/Temperature Rating Pressure, barg Temperature, C Table S Materials: lb Socketweld - 2" Connection Size Body Retainer Gasket Bolting Standard in, 3/4", 1",, 1, 2" ASTM A182 Gr. F22 Note: Other screen materials available. See page S-301. ASTM A182 Gr. F SS Spiral Wound Non-asbestos Studs ASTM A193 Gr. B16 Nuts ASTM A194 Gr. 2H 304 SS 0,045" Perforated Table S Physical Data: lb Socketweld - 2" Connection Size Ordering Code, Standard Weight Dimensions A B C* Saturated Steam Maximum Pressure 38 C non-shock in kg mm mm in bar bar 3/4" 1" 1 2" Retainer Type D1SW Bolted D1SW Bolted * Socketweld blowdown connections for pipe. Shade indicates products that are CE Marked according to the PED (97/23/EC). All the other sizes comply with the Article 3.3 of the same directive. Connections ANSI B16.11 Socketweld All dimensions and weights are approximate. Use certified print for exact dimensions. Design and materials are subject to change without notice. S-307
14 Cast Stainless Steel (CF8M) lb and 600 lb Screwed, Socketweld 1/2'' - 3'' E7SC/E7SW 1/2'', 3/4'', 1'' E7SC/E7SW 1 1/4'', 1 1/2'', 2'', 3'' Pressure/Temperature Rating - 1" Screwed & Socketweld Pressure, barg - 3" Scrd. & SW & 1-4" Cl. 600 Flanged 1-6" Cl. 300 Flanged - 6" Cl. 150 Flanged Temperature, C Table S Materials: lb and 600 lb Screwed or Socketweld - 3" Connections Size in Body Retainer Gasket Bolting Standard, 3/4", 1" ASTM A SS Flat N/A ASTM A SS Spiral Wound Studs ASTM A193 Gr. B7 316 SS 0,045", 1, 2" ASTM A351 Gr. CF8M Non-asbestos Nuts ASTM A194 Gr. 2H perforated Gr. CF8M 3" Non-asbestos Cap screws ASTM A193 Gr. B7 Note: Other screen materials available. See page S-301. Table S Physical Data: lb and 600 lb Screwed or Socketweld - 3" Dimensions Connection Ordering Code Weight Size Standard A B C Maximum Pressure Saturated Steam 38 C non-shock Retainer Type in Screwed SW kg mm mm in bar bar 1, /8" 3/4" E7SC E7SW 1, " 3, , , E7SC E7SW 2" 9, Bolted 3" 23, Connections Threaded ANSI B Screwed Shade indicates products that are CE Marked according to the PED (97/23/EC). All the other sizes comply with the Article 3.3 of the same directive. ANSI B16.11 Socketweld All dimensions and weights are approximate. Use certified print for exact dimensions. Design and materials are subject to change without notice. S-308
15 Cast Stainless Steel (CF8M) Cl. 150, 300 Flanged 1/2'' - 6'' and Cl. 600 Flanged 1/2'' - 4'' E7FL 1/2'', 3/4'', 1'' E7FL 1 1/2'', 2'', 3'' E7FL 4'', 6'' Table S Materials: Class 150, 300 Flanged - 6" and Class 600 Flanged - 4" Connection Size in Body Retainer Gasket Bolting Standard, 3/4", 1" ASTM A SS Flat N/A ASTM A SS Spiral Wound Studs ASTM A193 Gr. B7 1, 2" ASTM A351 Gr. CF8M Non-asbestos Nuts ASTM A194 Gr. 2H Gr. CF8M 3", 4", 6" Non-asbestos Cap Screws ASTM A193 Gr. B7 Note: Other screen materials available. See page S SS 0,045" perforated Table S Physical Data: Class 150, 300 Flanged - 6" and Class 600 Flanged - 4" Connection Ordering Dimensions Maximum Pressure Size Code, Weight Saturated 38 C A B C Retainer Standard Team non-shock Type in kg mm mm in bar bar 2, /8" 3/4" 4, Threaded 1" E7FL 150 5, , Bolted 2" 11, " 25, " E7FL , Bolted 6" , /8" 3/4" E7FL 300 4, Threaded 1" 6, , " 15, " E7FL , Bolted 4" 65, " 137, , /8" 3/4" E7FL 600 4, Threaded 1" 6, , " 14, E7FL 600 3" 34, " 69, Bolted Note: For pressure/temperature ratings, see page S-308. Shade indicates products that are CE Marked according to the PED (97/23/EC). All the other sizes comply with the Article 3.3 of the same directive. Flanges ANSI B16.5 1/16" RF ANSI B16.5 1/16" RF ANSI B16.5 1/4" RF All dimensions and weights are approximate. Use certified print for exact dimensions. Design and materials are subject to change without notice. S-309
16 Cast Bronze 300 lb Screwed 1/2'' - 2'' F4SC 1/2''- 2'' Temperature, C Pressure, barg Table S Materials: 300 lb Screwed - 2" Connection Size in Body Retainer Gasket Bolting Standard, 3/4", 1",, 1, 2" ASTM B62 Brass Copper N/A Brass 0,045" perforated Note: Other screen materials available. See page S-301. Table S Physical Data: 300 lb Screwed - 2" Connection Size Ordering Code, Standard Weight Dimensions A B C Maximum Pressure Saturated Steam 66 C non-shock Retainer Type in kg mm mm in bar bar 0, /8" 3/4" 0, " F4SC 1, Threaded 2, , " F4SC 5, Threaded Shade indicates products that are CE Marked according to the PED (97/23/EC). All the other sizes comply with the Article 3.3 of the same directive. Connections ANSI B Screwed All dimensions and weights are approximate. Use certified print for exact dimensions. Design and materials are subject to change without notice. S-310
17 Water Flow Capacities Table S Water Flow Capacities in m³/h Pressure Drop, bar Strainer Size, Inches Armstrong Y-Type Master Selection Table Table S Master Selection Table Material Connections Sizes Pressure - Temperature Ratings in Steam, Non-Shock Cold, Non-Shock Cast Iron Screwed lb - 3" C C ASTM A48 Class 125 Flanged 2" - 10" 8,6 178 C C Class 30 Class 250 Flanged 2" - 8" C C Cast Carbon Steel ASTM A216 Gr. WCB Cast Chrome Moly Steel ASTM A217 Gr. WC6 Forged Steel ASTM A182 Gr. F22 Cast SS ASTM A351 Gr. CF8M Cast Bronze ASTM B62 Screwed & Socketweld lb - 1" C C Screwed & Socketweld lb - 3" C C Class 150 Flanged - 6" C C Class 300 Flanged - 6" C C Class 600 Flanged - 4" C C Screwed & Socketweld lb - 1" C C Screwed & Socketweld lb - 2" C C Class Flanged - 1" C C Class Flanged - 2" C C Socketweld lb - 2" C C Screwed & Socketweld lb - 1" C C Screwed & Socketweld lb - 3" C C Class 150 Flanged - 6" C C Class 300 Flanged - 6" C C Class 600 Flanged - 4" C C Screwed lb - 2" C C S-311
18
PRESSURES TO 740 PSIG (51 BARG) TEMPERATURES TO 800 F (427 C) MODELS. 300Y Series Ordering Code. Add l Inlet Size Model Body Dash Perf Mesh Require-
APPLICATIONS Steam, liquid, gas and oil service Power industry Pulp and paper Chemical industry Process Equipment Metal & Mining Water & Waste OPTIONS Other perforated screens and mesh liners Other drain
More informationPRESSURES TO 285 PSIG (19.7 BARG) TEMPERATURES TO 750 F (390 C) MODELS. 150Y Series Ordering Code
APPLICATIONS Steam, liquid, gas and oil service Power Industry Pulp & Paper Process Equipment Chemical Industry Metal & Mining Water & Waste OPTIONS Other perforated screens and mesh liners Other drain
More informationYStrainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS RATINGS SIZES
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas YStrainers Pressures to 3705 PSIG Temperatures to 800ºF FEATURES Low pressure
More informationDESIGNER S GUIDE STRAINERS INTERNATIONAL
Y Strainers Basket Strainers T-Strainers Automatic Backwash Strainers Duplex Strainers Suction Diffusers Butterfly Valves Check Valves INTERNATIONAL DESIGNER S GUIDE Formerly SSI Equipment, now manufactured
More informationBALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
More informationNorth American Y-Type Strainers for Gas, Oil, Oxygen, Steam
Combustion North American Y-Type s for Gas, Oil, Oxygen, Steam The new 8555Y line provides many unique features: High pressure and temperature designs for rugged industrial applications Body and screen
More informationSuction Diffusers. Applications PROTECTION PUMP. Pressures to 790 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZE RANGES RATINGS
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas Suction Diffusers Pressures to 790 PSIG Temperatures to 800ºF FEATURES Filtration
More informationCASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
More informationKunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
More informationBasket Strainers. Applications. Pressures to 3705 PSIG. Temperatures to 800ºF FEATURES MATERIALS OF CONSTRUCTION END CONNECTIONS SIZES RATINGS
Applications Process Industry Metals and Mining Power Industry Water & Waste Water Chemical Industry Pulp and Paper Oil and Gas Basket Strainers Pressures to 3705 PSIG FEATURES Temperatures to 800ºF Fabricated
More informationPressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
More informationCrosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
More informationPressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
More informationFabricated Duplex Strainers
Applications Chemical Industry Metals & Mining Process Industry Water & Waste Water Power Industry Pulp & Paper Oil & Gas Fabricated Duplex Strainers Pressures to 1480 PSIG Temperatures to 800ºF FEATURES
More informationTStrainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZES RATINGS
Applications Steam, Liquid, Gas and Oil Service Process Equipment Water and Waste Power Industry Pulp and Paper Chemical Industry Metals and Mining TStrainers Pressures to 3705 PSIG Temperatures to 800ºF
More informationbutterfly valves high performance TRIPLE OFFSET HP-TRI REV0
high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
More informationSafety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
More informationT Strainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF STRAINERS FEATURES MATERIALS END CONNECTIONS SIZES RATINGS
Applications Steam, Liquid, Gas and Oil Service Process Equipment Water and Waste Power Industry Pulp and Paper Chemical Industry Metals and Mining Strainers Pressures to 3705 PSIG emperatures to 800ºF
More informationWafer Silent Check Valves
Applications Liquid Service Metals & Mining Process Industry Water & Waste Water Power Industry Pulp & Paper Chemical Industry Oil & Gas Wafer Silent Check Valves Pressures to 740 PSIG Temperatures to
More informationSeries 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
More informationSeries 77S-M1 ( 1 4" 3") Cast Iron Wye-pattern Strainers
Series S-M1 ( 1 4" ") Cast Iron Wye-pattern Install strainers up stream of equipment that need protection from scale, rust, dirt, etc Pressure Rating: (non-shock) 250psi WSP (1.2 bar) @ 406 F (208 C),
More informationControl Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationOne and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
More informationSpring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More information(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
More informationSV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
More informationType 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
More informationCONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION ON-OFF 2,3-WAY GLOBE VALVE YAD-112Q1/11231 Series YAC-31231 Series YAC-31281 Series http://www.proval.co.kr [B-8] GENERAL The single soft seat control valves are designed
More informationDischarge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
More information6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE
6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE DOCUMENT NO.: ES-1495 REVISION LEVEL: A ISSUED BY: Bill Hooks DATE: 09/25/13 APPROVED BY: DATE: APOLLO
More informationThe bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
More informationCASH VALVES TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES
Self-actuating pilot operated pressure reducing valve handling air, gas, and steam and accurate to within 1 /2% up to 3" and 1% for larger sizes. Description The G-4 regulator is a self-actuating pilot
More informationSteam Trapping and Steam Tracing Equipment
Steam Trapping and Steam Tracing Equipment Steam Traps Pay less money for energy and more attention to the environment. It s pretty obvious, really. An efficient steam trap wastes less energy, which means
More informationThe excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications. Features Swing check valves can fit on both horizontal and vertical (up-flow) piping.
More informationCast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
More informationSAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
More informationChampion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
More informationF20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More informationUNA 13 UNA 15 UNA 15 Stainless Steel Design. Installation Instructions Steam Traps UNA 13, UNA 15
UNA 13 UNA 15 UNA 15 Stainless Steel Design Installation Instructions 810604-01 Steam Traps UNA 13, UNA 15 1 Contents Important Notes Page Use... 7 Safety note... 7 Danger... 7 Explanatory Notes Scope
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationDBOY Series Pneumatic Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
More information394C. Series 6400/6600. Safety Valves for Power Boiler Service
394C Series 6400/6600 Safety Valves for Power Boiler Service Series 6400/6600 Designed with the user in mind, Series 6400 and 6600 safety valves represent the most advanced technology in valves designed
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
More informationBolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
More informationMSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More information310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
More informationMETSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW Neles BW series metal seated high performance butterfly valve with one piece body design, for both control and tight shut-off applications. Multiple
More informationCRFQ No dated E Tender No: 12647
CENTRAL PROCUREMENT ORGANISATION-REFINERIES BHARAT PETROLEUM CORPORATION LTD MUMBAI REFINERY, MAHUL MUMBAI - 400074 ADDENDUM NO:2 TO THE TENDER FOR STEAM TRAP SYSTEM DYNAMIC ANALYSIS & OPTIMIZATION AT
More informationSCA Series Steel Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationSECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
More information88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
More informationType 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
More informationHP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES
BFV-2 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Rev. 09/09 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Now you can turn high pressure applications into low risk decisions by turning to high performance
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More informationKEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationGWC Italia. Proven technology for individual valve solutions worldwide FSV-1005
GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w
More informationAN ISO 9001:2008 CERTIFIED COMPANY. Safety Valve
AN ISO 9001:2008 CERTIFIED COMPANY Safety Valve SAFETY VALVE FEATURE : - The Cr-V spring & novel disc & seat design provide reliable bubble tight seal. - Excellent re-seating ability - It features heavy-duty
More informationCONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
More informationFloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required.
FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required. Features Twin plate, flat seat design for enhanced sealing.
More informationYSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationSECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationDP163, DP163G and DP163Y Pilot Operated Pressure Reducing Valves with Stainless Steel Bodies
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationIron Horse ED Series Pressure Regulator
REGULATORS Applications Pressure Regulation for Steam Distribution Single Point or Multiple Use Applications Pressure Control for Steam Plants District Heating Systems Single Stage Reduction Stations Two
More informationSeries A angle pattern control valves
Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationExperience In Motion. Gestra Steam Solutions Catalog
Experience In Motion Gestra Steam Solutions Catalog Contents The Flowserve Gestra Steam Trap Range 5 What Are Steam Traps? 5 Short Guide to Steam Trap Selection 6 Gestra Steam Traps, Liquid Drainers and
More informationSECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS. Standard Compliance/Certifications S-2 Advantages S-3
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS DESCRIPTION Standard Compliance/Certifications S-2 Advantages S-3 PAGE Soft Seat Exploded View S-4 Fire Safe Seat Exploded
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More informationPWA-IL B73.2 IN-LINE
PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP COMPETITIVE ADVANTAGES vs. Ductile Iron n High-strength, impact resistant liquid ends for improved durability and
More informationKeystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationBronze Y Type Strainers
SETION 9a Bronze Y Type Strainers Tel: + ()95 7 Fax: + ()95 72 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents and Numerical Index Bronze Y Strainers ontents Page Figure Number
More informationV Series Control Port Ball Valves
Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
More informationD1 Series Top Guided Single Seated Control Valves
D1 Series Top Guided Single Seated Control Valves Model D1S Overview Model D1S globe control valves are with bolted bonnet and top guided contoured trims. The design facilitates easy access to internal
More informationHattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
More informationCAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
More informationJordan Control Valve Series
Jordan Control Valve Series JCVS Globe Style Control Valves Mark ED and ET Globe Style Control Valves The Mark ED and ET are single port, globe style bodies with composition or metal seats, and a balanced
More informationUNIFLEX COUPLINGS AND GENERAL USE VALVES
COUPLINGS AND GENERAL USE VALVES Reduce your maintenance and stocking costs with Nicholson's Uniflex Pipe Coupling. Uniflex has a spiral wound gasket that has successfully solved frequent leakage, intensive
More informationS and SF Series Cast Iron Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationModel 1415 TOSACA TECHNICAL DATA SHEET. Construction and materials. Technical information
Model 1415 TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation API RP 520 Connections Flanged ASME/ANSI B16.5 Design / Size API STD 526, ASME Section VIII Rating 150#/300#
More informationHigh performance safety valve for the protection of large boilers and superheaters, certified to ASME Section I.
Steam Safety Valve 9100 SAPAG High performance safety valve for the protection of large boilers and superheaters, certified to ASME Section I. Features National Board Certified to ASME I (3% overpressure,
More informationMounting and Operating Instructions EB 8111/8112 EN. Valve Series V2001 Globe Valve Type 3321
Valve Series V2001 Globe Valve Type 3321 Fig. 1 Type 3321 Valve with mounted rod-type yoke for pneumatic or electric actuators (partial view) Mounting and Operating Instructions EB 8111/8112 EN Edition
More informationGVER04 GLOBE VALVE. Fundamental Of Engineering Data. Fundamental Of Engineering Data 14.04
GVER04 14.04 GLOBE VALVE Fundamental Of Engineering Data Fundamental Of Engineering Data INDEX 03 04 05 06 07 PRODUT FEATURES MODEL SELECTION GUIDE GLOBE VALVE ASSEMBLY DIMENSION KS/JIS 10K RF, ANSI CL
More informationFabricated Tee Strainers Style T & TQ; 150#, 300# and 600# Flanged or Butt Weld Connections...6 Technical Data...7
07/1 Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 10#, 00# and 600# Flanged or Butt Weld Connections... Technical Data... Style FSA & FSSA; 900#, 100# and 00# Flanged or Butt Weld Connections...*
More informationKEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.
KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.
More informationDistributed By: M&M Control Service, Inc
Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 150#, 300# and 600# Flanged or Butt Weld Connections...2 Technical Data...3 Style FSA & FSSA; 900#, 1500# and 2500# Flanged or Butt Weld Connections...*
More informationYARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
More informationCarbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
More information310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
More informationSECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
More informationCrosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
More information