Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Transcription

1 Unit C5 Emery Court The Embankment Business Park Heaton Mersey Stockport SK4 3GL Contact: Mrs Rina Hare Tel: +44 (0) (+44 (0) ) Fax: +44 (0) Website: Laboratory locations: below s covered by the organisation and their relevant activities details Activity code Address: Exova Catalyst Unit C5 Emery Court The Embankment Business Park Heaton Mersey Stockport SK4 3GL Local contact Mr Barry Grant Tel: +44 (0) Mobile: +44 (0) Fax: +44 (0) barry.grant@exova.com Website: Support Functions: Quality System Quality Audit Administration Sampling and Testing: Physical Testing Environmental Chemistry HO Address: Exova Catalyst Unit C6 Emery Court The Embankment Business Park Heaton Mersey Stockport SK4 3GL Local contact Mr Toby Campbell Tel: +44 (0) Mobile: +44 (0) Fax: +44 (0) toby.campbell@exova.com Website: Support Functions: Administration Sampling and Testing: Stack Emissions Testing CST Address: Exova Catalyst 70 Montrose Avenue Hillington Park Glasgow G52 4LA Local contact Mr John Healey Tel: +44 (0) Mobile: +44 (0) Fax: +44 (0) john.healey@exova.com Website: Support Functions: Administration Sampling and Testing: Stack Emissions Testing CEK Address: Exova Catalyst 11 Aspen Close Kembrey Trade Centre Swindon SN2 8AJ Local contact Mr Paul Martin Tel: +44 (0) Mobile: +44 (0) paul.martin@exova.com Website: Support Functions: Administration Sampling and Testing: Stack Emissions Testing CSW Assessment Manager: MS5 Page 1 of 23

2 details Activity code Address: Exova Catalyst Ireland Unit D8 North City Business Park North Road Finglass Dublin 11 Local contact Mr Pat O Brien Tel: (86) Patrick.obrein@exova.com Website: Support Functions: Administration Sampling and Testing: Stack Emissions Testing CDU Address: Exova Catalyst Unit 4a Adwick Park Wath Upon Dearne Rotherham S63 5AB Local contact Mr Toby Campbell Tel: +44 (0) Mobile: +44 (0) Fax: +44 (0) toby.campbell@exova.com Website: Support Functions: Administration Sampling and Testing: Stack Emissions Testing CRO Address: Exova Catalyst Unit 37 Evans Business Centre Western Industrial Estate Caerphilly CF83 1BE Local contact Mr Paul Martin Tel: +44 (0) Mobile: +44 (0) Fax: +44 (0) paul.martin@exova.com Website: Support Functions: Administration Sampling and Testing: Stack Emissions Testing CCA Address: Exova Catalyst Shields Road Newcastle Upon Tyne Tyne & Wear NE6 2YD Local contact Mr John Healey Tel: +44 (0) Mobile: +44 (0) Fax: +44 (0) john.healey@exova.com Website: Support Functions: Administration Sampling and Testing: Stack Emissions Testing CNE Address: Exova Catalyst North Luton Industrial Estate Sedgewick Road Luton Bedfordshire LU4 9DT Local contact Mr Paul Martin Tel: +44 (0) Mobile: +44 (0) Fax: +44 (0) paul.martin@exova.com Website: Support Functions: Administration Sampling and Testing: Stack Emissions Testing CSE Address: Exova Catalyst Unit 3 Wednesbury One Black Country New Road Wednesbury WS10 7NZ Local Contact Mr Toby Campbell Tel: +44 (0) Mobile: +44 (0) Fax: +44 (0) toby.campbell@exova.com Website: Support Functions: Administration Sampling and Testing: Stack Emissions Testing CBR Assessment Manager: MS5 Page 2 of 23

3 Site activities performed away from the locations listed above: details Activity code Customer Sites requiring Stack Emissions Testing Stack Emissions Testing Customer Landfill Sites requiring sampling Sampling Landfill Gases Any suitable customer premises Sound insulation tests including pre-completion testing for dwellings and rooms for residential purpose. (teams from Howdon) Site - Noise Assessment Manager: MS5 Page 3 of 23

4 DETAIL OF ACCREDITATION to Atmosphere Sampling with subsequent analysis by an ISO/IEC Accredited Laboratory and Environment Agency specified standards including MIDs and Documented In-House work instructions to meet the requirements of the Environment Agency (MCERTS) Performance Standard and BS EN 15259:2007 Total Particulate Matter BS EN :2002 (CAT-TP-01) Particulate Matter <10 micron (PM10 and PM2.5) Odour (direct sampling of dry stacks and dynamic dilution sampling of hot wet stacks) BS EN ISO 23210:2009 (CAT-TP-18) BS EN 13725:2003 (CAT-TP-30) Oil mist, Tar and bitumen fume BS EN :2002 & MDHS 84 (CAT-TP-37) Hydrogen Chloride BS EN 1911:2010 (CAT-TP-11) Hydrogen Fluoride BS ISO 15713:2006 (CAT-TP-10) Sulphur Dioxide BS EN 14791:2017 (CAT-TP-09) Ammonia BS EN 14791:2005 (CAT-TP-14) Hydrogen Sulphide US EPA Method 11 (CAT-TP-15) Hydrogen Cyanide US EPA OTM 029 (CAT-TP-12) Sulphuric Acid (Sulphuric acid mist & Sulphur Trioxide) US EPA Method 8 (CAT-TP-42) Assessment Manager: MS5 Page 4 of 23

5 Sampling with subsequent analysis by an ISO/IEC Accredited Laboratory (cont d) and Environment Agency specified standards including MIDs and Documented In-House work instructions to meet the requirements of the Environment Agency (MCERTS) Performance Standard and BS EN 15259:2007 (cont d) Halides and Halogens Hydrogen Bromide Chlorine Bromine US EPA Methods 26 and 26a (CAT-TP-13) Metals BS EN 14385:2004 (CAT-TP-06) Mercury BS EN 13211:2001 (CAT-TP-06) Hexavalent chromium in fine particulate matter <10 micron (PM10 and PM2.5) BS EN ISO 23210:2009 (CAT-TP-18) except HO/CDU Dioxins and Furans BS EN :2006 (CAT-TP-07) Dioxin-like Polychlorinated Biphenyls (PCBs) Polycyclic Aromatic Hydrocarbons (PAHs) BS EN :2010 (CAT-TP-07) BS ISO :2003 (CAT-TP-08) Isocyanates US EPA CTM 036 (CAT-TP-17) Speciated VOCs (carbon and other suitable tubes) (direct sampling of dry stacks and dynamic dilution sampling of hot wet stacks) Mercaptans Amines and Amides Phenols Cresols Carboxylic Acids Aldehydes CEN TS 13649:2014 (CAT-TP-16) Assessment Manager: MS5 Page 5 of 23

6 Sampling with subsequent analysis by an ISO/IEC Accredited Laboratory (cont d) and Environment Agency specified standards including MIDs and Documented In-House work instructions to meet the requirements of the Environment Agency (MCERTS) Performance Standard and BS EN 15259:2007 (cont d) Total Aldehydes and Formaldehyde US EPA Method 316 (CAT-TP-19) Total Oxides of Nitrogen (NO, NO2 and nitric acid vapour) US EPA Method 7D (CAT-TP-35) Bioaerosols VDI 4257 part 2:2011 (Method CAT-TP-36) CST Sampling and On-Site Analysis Water Vapour BS EN 14790:2017 (CAT-TP-05) Sampling and On-Line Analysis Water Vapour* Pressure, Temperature and Velocity (point velocity method) Ammonia* EA BS EN ISO :2013 & MID (CAT-TP-41) - using differential pressure device (pitot tube) method EA (CAT-TP-22b - FTIR Assessment Manager: MS5 Page 6 of 23

7 Sampling and On-Line Analysis (cont d) and Environment Agency specified standards including MIDs and Documented In-House work instructions to meet the requirements of the Environment Agency (MCERTS) Performance Standard and BS EN 15259:2007 (cont d) Carbon Monoxide* BS EN 15058:2017 (CAT-TP-21 - NDIR (CAT-TP-25 - NDIR (CAT-TP-39 - NDIR EA Carbon Dioxide* ISO 12039:2001 (CAT-TP-21 - NDIR (CAT-TP-39 - NDIR EA (CAT-TP-22b - FTIR Nitrogen Monoxide (NO)* BS EN 14792:2017 (CAT-TP-21 - Chemiluminescent (CAT-TP-32 - Chemiluminescent (CAT-TP-39 - Chemiluminescent EA Nitrogen Dioxide (NO2)* BS EN 14792:2017 (CAT-TP-32 - Chemiluminescent EA Assessment Manager: MS5 Page 7 of 23

8 Sampling and On-Line Analysis (cont d) and Environment Agency specified standards including MIDs and Documented In-House work instructions to meet the requirements of the Environment Agency (MCERTS) Performance Standard and BS EN 15259:2007 (cont d) Nitrous Oxide (N2O)* BS EN ISO 21258:2010 (CAT-TP-40 - NDIR EA Oxides of nitrogen (NOx)* BS EN 14792:2017 (CAT-TP-21 - Chemiluminescent (CAT-TP-32 - Chemiluminescent (CAT-TP-39 - Chemiluminescent EA Sulphur Dioxide* Sulphur Trioxide* Hydrogen Chloride* Hydrogen Cyanide* Hydrogen Fluoride* EA TGN M21 (CAT-TP-21 - NDIR EA (CAT-TP-22b - FTIR EA (CAT-TP-22b - FTIR EA EA (CAT-TP-22b - FTIR EA Assessment Manager: MS5 Page 8 of 23

9 Sampling and On-Line Analysis (cont d) and Environment Agency specified standards including MIDs and Documented In-House work instructions to meet the requirements of the Environment Agency (MCERTS) Performance Standard and BS EN 15259:2007 (cont d) Oxygen* BS EN 14789:2017 (CAT-TP-21 - Validated Zirconium cell (CAT-TP-22 - Validated Zirconium cell (CAT-TP-25 - Paramagnetic (CAT-TP-33 - Paramagnetic (CAT-TP-39 - Paramagnetic Total Gaseous Organic* Carbon (TOC / VOC) (0 to 1000 mg/m³) Halides and Halogens* Speciated VOCs* Other inorganic gases* The organisation holds a flexible scope of accreditation for these tests. Please contact the organisation for details of the individual gaseous compounds they can sample and analyse using this method. BS EN 12619:2013 (CAT-TP-20 - FID Analyser) EA (CAT-TP-22b - FTIR * - The scale range of the analyser used for this test must be that detailed on its current MCERTS certificate or a range validated by the organisation to meet MCERTS requirements. Assessment Manager: MS5 Page 9 of 23

10 Stack Emissions - Continuous Emissions Monitoring Systems (CEMS) QAL 2 and the Annual Surveillance Test (AST) for CEMS Documented in house procedure CAT-TP-29 to meet the requirements of BS EN 14181:2014, Environment Agency MID (TGN M20 Annex A) and other requirements of the Environment Agency (MCERTS) Performance Standard and BS EN 15259:2007 CSW CST CEK CDU to Atmosphere Sampling with subsequent analysis by an ISO/IEC Accredited Laboratory and Irish Environmental Protection Agency specified standards and Documented In- House work instructions to meet the requirements of Irish Environmental Protection Agency Publications AG1 and AG2 and IS EN 15259:2007 Total Particulate Matter IS EN :2002 including MID (CAT-TP-01) Particulate Matter <10 micron (PM10 and PM2.5) IS EN ISO 23210:2009 (CAT-TP-18) Odour (direct sampling of dry stacks and dynamic dilution sampling of hot wet stacks) IS EN 13725:2003 including MID (CAT-TP-30) Assessment Manager: MS5 Page 10 of 23

11 Sampling with subsequent analysis by an ISO/IEC Accredited Laboratory (cont d) and Irish Environmental Protection Agency specified standards and Documented In- House work instructions to meet the requirements of Irish Environmental Protection Agency Publications AG1 and AG2 and IS EN 15259:2007 (cont d) Oil mist, Tar and bitumen fume IS EN :2002 & MDHS 84 (CAT-TP-37) Hydrogen Chloride IS EN 1911:2010 (CAT-TP-11) Hydrogen Fluoride IS ISO 15713: including Environment Agency (England) MID (CAT-TP-10) Sulphur Dioxide IS EN 14791:2017 (CAT-TP-09) Ammonia IS EN 14791:2005 (CAT-TP-14) Hydrogen Sulphide US EPA Method 11 (CAT-TP-15) Hydrogen Cyanide US EPA OTM 029 (CAT-TP-12) Sulphuric Acid (Sulphuric acid mist & Sulphur Trioxide) Halides and Halogens Hydrogen Bromide Chlorine Bromine Metals US EPA Method 8 (CAT-TP-42) US EPA Methods 26 and 26a (CAT-TP-13) IS EN 14385:2004 including MID (CAT-TP-06) Assessment Manager: MS5 Page 11 of 23

12 Sampling with subsequent analysis by an ISO/IEC Accredited Laboratory (cont d) and Irish Environmental Protection Agency specified standards and Documented In- House work instructions to meet the requirements of Irish Environmental Protection Agency Publications AG1 and AG2 and IS EN 15259:2007 (cont d) Mercury IS EN 13211:2001 including MID (CAT-TP-06) Dioxins and Furans IS EN :2006 including MID 1948 (CAT-TP-07) Dioxin-like Polychlorinated Biphenyls (PCBs) IS EN :2010 including MID 1948 (CAT-TP-07) Polycyclic Aromatic Hydrocarbons (PAHs) IS ISO :2003 (CAT-TP-08) Isocyanates US EPA CTM 036 (CAT-TP-17) Speciated VOCs (carbon and other suitable tubes) (direct sampling of dry stacks and dynamic dilution sampling of hot wet stacks) Mercaptans Amines and Amides Phenols Cresols Carboxylic Acids Aldehydes Total Aldehydes and Formaldehyde CEN TS 13649:2014 (CAT-TP-16) US EPA Method 316 (CAT-TP-19) Assessment Manager: MS5 Page 12 of 23

13 Sampling with subsequent analysis by an ISO/IEC Accredited Laboratory (cont d) and Irish Environmental Protection Agency specified standards and Documented In- House work instructions to meet the requirements of Irish Environmental Protection Agency Publications AG1 and AG2 and IS EN 15259:2007 (cont d) Total Oxides of Nitrogen (NO, NO2 and nitric acid vapour) US EPA Method 7D (CAT-TP-35) Bioaerosols VDI 4257 part 2:2011 (Method CAT-TP-36) CST Sampling and On-Site Analysis Water Vapour IS EN 14790:2017 (CAT-TP-05) Sampling and On-Line Analysis Water Vapour Pressure, Temperature and Velocity (point velocity method) Ammonia IS EN ISO :2013 including Environment Agency (England) MID (CAT-TP-41) - using differential pressure device (pitot tube) method (CAT-TP-22b - FTIR Assessment Manager: MS5 Page 13 of 23

14 Sampling and On-Line Analysis (cont d) and Irish Environmental Protection Agency specified standards and Documented In- House work instructions to meet the requirements of Irish Environmental Protection Agency Publications AG1 and AG2 and IS EN 15259:2007 (cont d) Carbon Monoxide IS EN 15058:2017 (CAT-TP-21 - NDIR (CAT-TP-25 - NDIR (CAT-TP-39 - NDIR Carbon Dioxide ISO 12039:2001 (CAT-TP-21 - NDIR (CAT-TP-39 - NDIR Nitrogen Monoxide (NO) (CAT-TP-22b - FTIR IS EN 14792:2017 including MID (CAT-TP-21 - Chemiluminescent (CAT-TP-32 - Chemiluminescent (CAT-TP-39 - Chemiluminescent Assessment Manager: MS5 Page 14 of 23

15 Sampling and On-Line Analysis (cont d) and Irish Environmental Protection Agency specified standards and Documented In- House work instructions to meet the requirements of Irish Environmental Protection Agency Publications AG1 and AG2 and IS EN 15259:2007 (cont d) Nitrogen Dioxide (NO2) IS EN 14792:2017 including MID (CAT-TP-32 - Chemiluminescent Nitrous Oxide (N2O) IS EN ISO 21258:2010 (CAT-TP-40 - NDIR Oxides of nitrogen (NOx) IS EN 14792:2017 including MID (CAT-TP-21 - Chemiluminescent (CAT-TP-32 - Chemiluminescent (CAT-TP-39 - Chemiluminescent Assessment Manager: MS5 Page 15 of 23

16 Sampling and On-Line Analysis (cont d) and Irish Environmental Protection Agency specified standards and Documented In- House work instructions to meet the requirements of Irish Environmental Protection Agency Publications AG1 and AG2 and IS EN 15259:2007 (cont d) Sulphur Dioxide TGN M21 (CAT-TP-21 - NDIR Sulphur Trioxide (CAT-TP-22b - FTIR Hydrogen Chloride Hydrogen Cyanide (CAT-TP-22b - FTIR Hydrogen Fluoride (CAT-TP-22b Validated FTIR Assessment Manager: MS5 Page 16 of 23

17 Sampling and On-Line Analysis (cont d) and Irish Environmental Protection Agency specified standards and Documented In- House work instructions to meet the requirements of Irish Environmental Protection Agency Publications AG1 and AG2 and IS EN 15259:2007 (cont d) Oxygen IS EN 14789:2017 (CAT-TP-21 - Validated Zirconium cell (CAT-TP-22 - Validated Zirconium cell (CAT-TP-25 - Paramagnetic (CAT-TP-33 - Paramagnetic (CAT-TP-39 - Paramagnetic Total Gaseous Organic Carbon (TOC / VOC) (0 to 1000 mg/m³) Halides and Halogens Speciated VOCs Other inorganic gases The organisation holds a flexible scope of accreditation for these tests. Please contact the organisation for details of the individual gaseous compounds they can sample and analyse using this method. IS EN 12619:2013 (CAT-TP-20 - FID Analyser) (CAT-TP-22b - FTIR - The scale range of the analyser used for this test must meet the specific requirements specified in the Irish Environmental Protection Agency document AG2 Index of Preferred Methods Assessment Manager: MS5 Page 17 of 23

18 to Atmosphere Sampling with subsequent analysis by an ISO/IEC Accredited Laboratory National, International and other recognised standards using documented In-House work instructions to meet the requirements of BS EN 15259:2007 Total Particulate Matter 20 to 1000mg/m 3 BS ISO 9096:2003 Particulate Matter <10 micron (PM10 and PM2.5) US EPA Method 201A (CAT-TP-26) Condensable VOC s (sector specific to DEFRA sector guidance note SG1-06 and operator permit) Based on BS EN (CAT-TP-23) Particulate and gaseous fluoride content Based on BS ISO 15713:2006. Method number CAT-TP-10b. CDU CEK Total acids Based on BS EN 1911:2010. Method number CAT-TP-31. CDU CEK Sulphuric Acid (Sulphuric acid mist & Sulphur Trioxide) and Sulphur dioxide Combined sampling train US EPA Method 8 (CAT-TP-42) Assessment Manager: MS5 Page 18 of 23

19 Sampling and On-line National, International and other Analysis recognised standards using documented In-House work instructions to meet the requirements of BS EN 15259:2007 Determination of NO & NO2 ISO (CAT-TP-28, by Electrochemical Cell Testo 350XL Determination of SO2 by BS / ISO 7935 Electrochemical Cell (CAT-TP-28, Testo 350XL Determination of CO by ISO (CAT-TP-28, Testo Electrochemical Cell 350XL Determination of O2 by ISO (CAT-TP-28, Testo Electrochemical Cell 350XL Assessment Manager: MS5 Page 19 of 23

20 LANDFILL SITES Sampling of Landfill Gas for Subsequent Analysis by an ISO/IEC Accredited Laboratory Documented In-House Procedures Based on Environment Agency guidance document LFTGN04 Trace Components by Sorbent Tubes: Priority Trace Components: Based on CEN TS 13649:2014 (CAT-TP-16) 1,1-Dichloroethane 1,2-Dichloroethane 1,1-Dichloroethene 1,2-Dichloroethene 1,3-Butadiene 1-Butanethiol 1-Pentene 1-Propanethiol 2-Butoxy Ethanol Arsenic (as As) Benzene Butyric Acid Carbon Disulphide Chloroethane Chloroethene (Vinyl Chloride) Dichloromethane Dimethyl Disulphide Dimethyl Sulphide Ethanal (Acetaldehyde) Ethanethiol Ethyl Butyrate Furan (1,4-Epoxy-1,3- Butadiene) Mercury (as Hg) Methanal (Formaldehyde) Methanethiol PCDDs/PCDFs Styrene 1,1,2,2, - Tetrachloroethane Tetrachloroethene Tetrachloromethane Toluene Trichloroethene Trimethylbenzene Assessment Manager: MS5 Page 20 of 23

21 LANDFILL SITES (cont d) Sampling of Landfill Gas for Subsequent Analysis by an ISO/IEC Accredited Laboratory (cont d) Documented In-House Procedures Based on Environment Agency guidance document LFTGN04 (cont d) Siloxanes Based on CEN TS 13649:2014 (CAT-TP-16) Decamethylcyclopenta siloxane Decamethyltetrasiloxane Dodecamethylcyclohexa siloxane Dodecamethylpentasiloxane Hexamethylcyclotrisiloxane Hexamethyldisiloxane Octamethylcyclotetrasiloxane Octamethyltrisiloxane Trimethylsilanol Trace and Bulk Components By Tedlar Bags: CAT-TP-27 Hydrogen Sulphide Carbon Monoxide Carbon Dioxide Oxygen Methane Nitrogen Assessment Manager: MS5 Page 21 of 23

22 ATMOSPHERIC POLLUTANTS AND EFFLUENTS STACK GAS SAMPLES Chemical Tests Documented In-House Methods based on the following national, international and other recognised standards. Impinger Solutions (hydrogen peroxide) Sulphur Dioxide BS EN 14791:2005 using Ion Chromatography analysis (CAT-AP-01) HO Impinger Solutions (sodium hydroxide) Hydrogen Fluoride BS ISO 15713:2006 (modified) using Ion Chromatography analysis (CAT-AP-01) HO Impinger Solutions (water) Hydrogen Chloride BS EN 1911:2010 using Ion Chromatography analysis (CAT-AP-01) HO Impinger Solutions (water) Nitrate Sulphate Fluoride In house method using Ion Chromatography analysis (CAT-AP-01) HO Impinger Solutions (water) Total Acids expressed as HCl Stoichiometric Calculation from fluoride, sulphate, nitrate and hydrogen chloride by Ion Chromatography (CAT-AP-01) HO Filter Papers and Rinse Solutions Weighing of Particulate Matter BS EN :2002 BS ISO 9096:2003 (CAT-TP-03) HO Weighing of Particulate Matter <10 micron (PM10 and PM2.5) US EPA Method 201A (CAT-TP-03) BS EN ISO 23210:2009 (CAT-TP-03) HO Impinger Solutions (water) Formaldehyde USEPA Method 316 (in-house method CAT-AP-05) by UV/VIS Spectroscopy HO IOM sampling heads (including PUF plugs and 25mm GFA filters) & 25mm GFA filters Total Particulate Matter MDHS 14/4 (in house method CAT TP-03) by Gravimetric determination HO Assessment Manager: MS5 Page 22 of 23

23 Acoustic Testing Measurement of Noise Buildings Field Measurement of Airborne Sound Insulation, ie, level difference and related factors Sound insulation tests including pre-completion testing for dwellings and rooms for residential purpose for The Building Regulations Approved Document E (2003 Edition incorporating 2004 & 2010,2013 & 2015 amendments). BS EN ISO 140-4:1998 BS EN ISO 717-1:1997 Post completion sound insulation testing for the Building (Scotland) Regulations 2004 using the guidance given in Technical Handbooks Section 5, Noise for Domestic Buildings CNE Acoustic Testing (cont d) Measurement of Noise (cont d) Buildings-floors Field Measurement of Impact Sound Insulation of floors between rooms ie impact sound pressure level and related factors Sound insulation tests including pre-completion testing for dwellings and rooms for residential purpose for The Building Regulations Approved Document E (2003 Edition incorporating 2004 & 2010, 2013 and 2015 amendments). BS EN ISO 140-7:1998 BS EN ISO 717-2:1997 Post completion sound insulation testing for the Building (Scotland) Regulations 2004 using the guidance given in Technical Handbooks Section 5, Noise for Domestic Buildings CNE END Assessment Manager: MS5 Page 23 of 23