AIR-COOLED DIESEL ENGINES
|
|
|
- Isabel Elliott
- 5 years ago
- Views:
Transcription
1 AIRCOOLED DIESEL EGIES kw hp AirCooled Diesel Engines / 3
2 AIR COOLED DIESEL EGIES STADARD EQUIPMET Recoil starting with automatic compression release* Fuel tank Fuel filter Dry air cleaner Muffler with guard Accelerator and stop manual control Manual compression release Automatic deaeration on injection pump Wire mesh oil filter External safety fuel filter Automatic fuel control during start User maintenance and spare parts booklet Specific for KD1 0 model: Hydraulic tappets Highcapacity dry air cleaner OPTIOAL ACCESSORIES Power takeoff flywheel side (engines with electrical starting) Power takeoffs with flanging and special shaft Conical power takeoff Lateral power takeoff Internal dynamic balancer Electric start 12/2 V Key switch panel Fuel lift pump Oil pressure switch Emergency stop through electrovalve Accelerator and stop remote control Oil temperature switch Cylinder head temperature switch Glow plug on intake manifold Stop with solenoid valve Recoil with sounddampening cover Grass screen Oil level sensor switch Alternator with voltage regulator 12 or 2 V Oil refill on crankcase side Highcapacity oil sump (KD 30 and KD1 0) Highcapacity oil and fuel filters for remote assembly Fuel tank drain tap Threeyear extended warranty Specific for KD1 0 model: *ot available on KD 00 model On KD 00 model only Internal fuel prefilter Cyclonic air intake prefilter Single lever control Control lever guard Air filter clogging indicator, integrated into the engine construction form External spin on oil filter 2 / AirCooled Diesel Engines AirCooled Diesel Engines / 3
3 KD (IFACCORDIG TO ISO 306 and ISO 1396) Kgm m A kw hp Ø C Power curve 80/1269/CE EISO 18 Power curve ISO 306/1 IF A Power curve ISO 306/1 ICX Torque curve ( curve) C Specific fuel consumption ( curve) 130 Ø11 2 holes R standard muffler, after runningin period at ambient conditions of +2 C, relative humidity 30% and 1 bar. 2% every C above +2 C. CYLIDERS 1 MAX POWER kw (hp)@ MAX TORQUE m@ / KD22 AirCooled Diesel Engines / 3
4 KD 22S (IFACCORDIG TO ISO 306 and ISO 1396) Kgm m A kw hp Ø C Power curve 80/1269/CE EISO 18 Power curve ISO 306/1 IF A Power curve ISO 306/1 ICX Torque curve ( curve) C Specific fuel consumption ( curve) 130 Ø11 2 holes R standard muffler, after runningin period at ambient conditions of +2 C, relative humidity 30% and 1 bar. 2% every C above +2 C. Sound pressure level up to 2 db(a) less than the standard version CYLIDERS 1 MAX POWER kw (hp)@ MAX TORQUE m@ / KD22S AirCooled Diesel Engines / 3
5 KD (IFACCORDIG TO ISO 306 and ISO 1396).1 kw Kgm m A kw hp C Power curve 80/1269/CE EISO 18 Power curve ISO 306/1 IF A Power curve ISO 306/1 ICX Torque curve ( curve) C Specific fuel consumption ( curve) Ø11 2 holes 90 8 (R.) standard muffler, after runningin period at ambient conditions of +2 C, relative humidity 30% and 1 bar. 2% every C above +2 C CYLIDERS MAX POWER kw (hp)@ MAX TORQUE m@ EMISSIO COMPLIACE US TIER Final EU STAGE V* *Available in / KD30 AirCooled Diesel Engines / 3
6 KD 30S (IFACCORDIG TO ISO 306 and ISO 1396) Kgm m A C kw hp Power curve 80/1269/CE EISO 18 Power curve ISO 306/1 IF A Power curve ISO 306/1 ICX Torque curve ( curve) C Specific fuel consumption ( curve) Ø11 2 holes 90 8 (R.) standard muffler, after runningin period at ambient conditions of +2 C, relative humidity 30% and 1 bar. 2% every C above +2 C. Sound pressure level up to 2 db(a) less than the standard version CYLIDERS 1 MAX POWER kw (hp)@ MAX TORQUE m@ / KD30S AirCooled Diesel Engines / 3
7 KD (IFACCORDIG TO ISO 306 and ISO 1396) 7. kw ( kw 8 hp kgm m A C Ø11 2 holes R. R Power curve 80/1269/CE EISO 18 Power curve ISO 306/1 IF A Power curve ISO 306/1 ICX Torque curve ( curve) C Specific fuel consumption ( curve) standard muffler, after runningin period at ambient conditions of +2 C, relative humidity 30% and 1 bar. 2% every C above +2 C. CYLIDERS MAX POWER kw (hp)@ / MAX TORQUE m@ EMISSIO COMPLIACE US TIER Final EU STAGE V* *Available in / KD1 0 AirCooled Diesel Engines / 3
8 KD1 0S 12.8 (IFACCORDIG TO ISO 306 and ISO 1396) Kgm m A kw hp C Ø11 n 2 holes R. R. 8 x 9 Power curve 80/1269/CE EISO 18 Power curve ISO 306/1 IF A Power curve ISO 306/1 ICX Torque curve ( curve) C Specific fuel consumption ( curve) standard muffler, after runningin period at ambient conditions of +2 C, relative humidity 30% and 1 bar. 2% every C above +2 C. Sound pressure level up to 2 Db less than the standard version A CYLIDERS 1 MAX POWER kw (hp)@ Y MAX TORQUE m@ 0 A 1 / KD1 0S AirCooled Diesel Engines / 3
9 KD (IFACCORDIG TO ISO 306 and ISO 1396) Kgm m A C kw hp Power curve 80/1269/CE EISO 18 Power curve ISO 306/1 IF A Power curve ISO 306/1 ICX Torque curve ( curve) C Specific fuel consumption ( curve) R. 7 3 R. standard muffler, after runningin period at ambient conditions of +2 C, relative humidity 30% and 1 bar. 2% every C above +2 C Power max. * (kw) Torque max. (m) CYLIDERS 1 MAX POWER kw (hp)@ MAX TORQUE m@ R, 16 / KD00 AirCooled Diesel Engines / 3
10 APPLICATIO SPECIFICATIOS AVAILABLE FLAGES* Standard flange KD2222S / KD3030S Industrial version KD2222S Minimum pulley diameters for belt drive D 2 (mm) 70 [90 + L 2 D 1 (mm) 820 [ + L 1 Standard version KD2222S / KD3030S 6 holes M8X1.2 6H 20 deep Ø Ø13 Mounting surface M8X1.26H Taper 1: ( 3 ) M8X1.26H Ø8. Ø23±0.01 Flange type A KD2222S Genset version Industrial version Ø10 Ø13 Max intermittent axial load in both directions A B = 10 kg Max radial force on pulley for belt drive Flange SAE J609a EXT a J609a EXT 3 SAE J609a F2 () 90+L2 (mm) KD3030S Minimum pulley diameters for belt drive D 2 (mm) 860 [60 + L 2 Max intermittent axial load in both directions A B = 200 kg Max radial force on pulley for belt drive F2 () 60+L2 (mm) F1 () +L1 (mm) D 1 (mm) 820 [ + L F1 () +L1 (mm) KD2222S Ø97 Ø1.2±0.02 holes /162UF2B 21 deep Cylinder axis Ø H7 Ø ±0. Ø19.8±0.02 Ø19.17± /162UF2BRH Ø17. Mounting surface equivalent to a2 1/ per feet Cylinder axis Ø H /162UF2BTAP Mounting surface Ø KD10 Flange type B KD3030S Genset version Industrial version Flange SAE J609a EXT 6 SAE EXT. SAE Minimum pulley diameters for belt drive D 2 (mm) 620 [66 + L 2 Max intermittent axial load in both directions A B = 2000 Max Max radial force on pulley for belt drive F 1 () 3+L 1 (mm) KD00 D 1 (mm) 60 [3 + L F 2 () 66+L 2 (mm) KD3030S holes 3/8 16UC2B 17 deep Ø Ø16 Cylinder axis Mounting surface Ø Ø equivalent to a2 1/ per feet /162UF2BRH Cylinder axis Mounting surface Ø /8 2UF28TAP Minimum pulley diameters for belt drive D 2 (mm) 900 [8 + L 2 D 1 (mm) 70 [ + L 1 Max intermittent axial load in both directions A B = 200 kg *Other flanges available on request Max radial force on pulley for belt drive F2 () L2 (mm) F1 () L1 (mm) 18 / Application Specifications Application Specs / 19
11 AVAILABLE FLAGES* Standard flange KD00 Standard version Genset version AVAILABLE FLAGES* Standard flange Standard version Industrial version KD00 I=13 Ø12 Motor axis holes M8 12 M16x1. Ø 2 ( ) Ø 10 f8 Motor axis M8 Ø 2 (0,036 0,09) Taper 1: Taper 1: 12 holes M8 Ø 10 f8 6 holes M8X1.2 6H 20 deep holes 3/8 16UC2B 17 deep Ø16 Ø13 Mounting surface M8X1.26H 2 Taper 1: ( 3 ) M8X1.26H Ø8. Ø23±0.01 Ø10 Ø13 Mounting surface Cylinder axis Ø28 SAE J609a EXT ±0.01 3/8 2UF28TAP Ø KD00 EXT 6 SAE 30 I=16.1±0.1 Flange type B KD00 Genset version Flange 2 type Genset version 30 Motor axis Ø 26 ±0,1 Ø holes M Ø /6 2 UF Ø KD0 Ø16 Ø holes 3/8 16UC2B 17 deep holes M8X1.2 6H 20 deep SAE J609a EXT.6Ø1inch flange type B Mounting surface SAE J609a typeb equivalent to 2 1/ per feet Cylinder axis Ø28 Ø2. Ø /162UF2BRH PTO on camshaft *Other flanges available on request /16 2 UF depth 17 Motor axis /8 2 UF Ø KD Ø Ø , /16 2 UF depth 11 /16 2 UF depth *Other flanges available on request 20 / Application Specs Application Specs / 21
12 TECHICAL SPECIFICATIOS Model KD22 KD22S KD30 KD30S Engine specs Technical features Performance Fuel compatibility Service features Physical characteristics Lubrication Fourstroke aircooled diesel engine Conical power takeoff on crankshaft Counterclockwise rotation Forced lubrication with oil pump Centrifugal mass governor Builtin fullflow oil filter Oil breathing blowby with safety device Automatic extra fuel starting device Selfbleeding fuel system Torque adjuster Automatic compression release Diecast aluminum crankcase with integral castiron cylinder liner Reborable independent castiron cylinders Aluminum cylinder head Builtin rigid feet Hydraulic tappets Cylinder Bore (mm) Stroke (mm) Engine displacement (cm 3 ) Injection system DI DI DI DI Compression ratio 21:1 21:1 20.3:1 20.3:1 Emission compliance ECE R 2 ECE R 2 Rating (kw/hp) (80/1269/CEE) ISO 18 ISO 306 IF A ISO 306 ICX 3. /.8 3.3/. 3.1/.2 (3000 ) 2.7 / / /3.1. /7..1 /6.8.7/6.2 U.S. TIER F.0/6.7 EU STAGE V.3/7.1.0 /6.8.6 /6.2.1 /.6 Max torque (m@) 10.@ @ @ @ @0 Min idling speed E 90 o 1 Diesel (U.S.) ASTM D 9709 B Grade 1D S 1 o 1 Diesel (U.S.) ASTM D 9709 B Grade 1D S 00 o 2 Diesel (U.S.) ASTM D 9709 B Grade 2D S 1 o 2 Diesel (U.S.) ASTM D 9709 B Grade 2D S 00 ARCTIC E 90/ASTM D 9709 B High Sulfur Fuel < 000 ppm (< 0.%) High Sulfur Fuel > 000 ppm ( > 0.%) Military ATO Fuels F3 F3 F F63 F6 F6* Military U.S. Fuels JP JP8 (AVTUR)* Civil Jet Fuels Jet A/ A1* Fuel tank capacity (l) Oil sump capacity (l) Oil consumption (kg/h) Oil change interval std/synthetic (hr) Oil filter change interval std/synthetic (hr) Dry air cleaner change interval (hr) Valve adjustment H L W (fan excluded) (mm) Dry weight (kg) Daily service points positions 1 side service 1 side service 1 side service 1 side service Ambient operating temps ( C) 10 to to to to +0 Gradeabilityall round (intermittent 30 min) (deg) Gradeabilityall round (peak value 1 min) (deg) Cap. of air required for correct (l/min) Cap. of air required for correct (l/min) Oil type SAE W 0 API SERVICE CF SAE W 0 API SERVICE CF SAE W 0 API SERVICE CF SAE W 0 API SER VICE CF TECHICAL SPECIFICATIOS Model KD1 0 KD1 0S KD 00 Fourstroke air cooled diesel engine Engine specs Technical features Performance Fuel compatibility Service features Physical characteristics Lubrication Conical power takeoff on crankshaft Counterclockwise rotation Forced lubrication with oil pump Centrifugal mass governor Builtin fullflow oil filter Oil breathing blowby with safety device Automatic extra fuel starting device Selfbleeding fuel system Torque regulator Automatic compression release Diecast aluminum crankcase with integral castiron cylinder liner Reborable independent castiron cylinders Aluminum alloy cylinder head Builtin rigid feet Hydraulic tappets Cylinder Bore (mm) Stroke (mm) Engine displacement (cm 3 ) Injection system DI DI DI Compression ratio 20.3:1 20.:1 19:1 Emission compliance ECE R 2 Rating (kw/hp) (80/1269/CEE) ISO 18 ISO 306 IF A ISO 306 ICX 7. /10.1 U.S. TIER F 6. / 8. EU STAGE V 7. / / / /8. ECE R 2 (3000 ) 8.2 / / /9.6 Max torque (m@) 23@0 2.@0 22.@0 30.0@0 Min idling speed E 90 o 1 Diesel (U.S.) ASTM D 9709 B Grade 1D S 1 o 1 Diesel (U.S.) ASTM D 9709 B Grade 1D S 00 o 2 Diesel (U.S.) ASTM D 9709 B Grade 2D S 1 o 2 Diesel (U.S.) ASTM D 9709 B Grade 2D S 00 ARCTIC E 90/ASTM D 9709 B High Sulfur Fuel < 000 ppm (< 0.%) High Sulfur Fuel > 000 ppm ( > 0.%) Military ATO Fuels F3 F3 F F63 F6 F6* Military U.S. Fuels JP JP8 (AVTUR)* Civil Jet Fuels Jet A/ A1* Fuel tank capacity (l).3.3 Oil sump capacity (l) Oil consumption (kg/h) Oil/filter change interval std/synthetic (hr) Oil filter change interval std/synthetic (hr) Dry air cleaner change interval (hr) Valve adjustment H L W (fan excluded) (mm) x1x3 Dry weight (kg) 8 Daily service points positions 1 side service 1 side service 1 side service Ambient operating temps ( C) 10 to to to +0 Gradeabilityall round (intermittent 30 min) (deg) Gradeabilityall round (peak value 1 min) (deg) Cap. of air required for correct combustion@3600 (l/min) Cap. of air required for correct (l/min) Oil type *With restrictions According to operating conditions Available in 2019 SAE W 0 API SERVICE CF SAE W 0 API SERVICE CF 8.8 / / /10.2 SAE W 0 API SERVICE CF * With restrictions According to operating conditions Available in / Technical Specifications Technical Specifications / 23
13 AMERICAS Latin America orth America Diesel +1 (920)1 1 KDI +1 (800) 2 enginefieldservice@kohler.com EUROPE +39 (0) infodiesel@kohler.com France +33 (0) fr.infodiesel@kohler.com Germany +9 (0) de.infodiesel@kohler.com Spain +3 (0) es.infodiesel@kohler.com United Kingdom + (0) uk.infodiesel@kohler.com ASIAPACIFIC China power@kohler.com.cn Singapore sgsalesall@kohler.com KOHLERPOWER.COM E2293 / BY KOHLER CO.
AIR COOLED DIESEL ENGINES kw hp
AIR COOLED DIESEL EGIES 2.7 8.8 kw 3.7 1 hp AIR COOLED DIESEL EGIES STADARD EQUIPMET Recoil starting with automatic compression release Fuel tank Fuel filter Dry air cleaner Muffler with guard Accelerator
Air cooled Diesel engines kw
Air cooled Diesel engines 2.7-8.8 kw 15 LD, the most complete family of single cylinder air cooled engines, comprises 5 model s in the power r ange 2.7 to 8.8 k W. Particularly suited to small agricultur
Air cooled Diesel engines kw
Air cooled Diesel engines 2.7-8.8 kw KD15 / 15 LD, the most complete family of single cylinder air cooled engines, comprises 5 models in the power range 2.7 to 8.8 kw. Particularly suited to small agricultur
In order to meet ever increasing m a rk e t dem a nds, the Kohler group. the cl a ss within its power r ange.
In order to meet ever increasing m a rk e t dem a nds, the Kohler group h a s b e e n u p d at i n g i t s r a n g e o f air-cooled, single cylinder diesel e n g i n e s. N o w, w e a r e p l e a s e d
Liquid cooled Diesel engines kw
Liquid cooled Diesel engines 8.6-26.0 kw Water cooled Diesel engines 8.6-26.0 kw STANDARD EQUIPMENT External oil filter Exhaust manifold Intake manifold Intake fan Accelerator control Electric starter
KOHLER DIESEL KDI kw hp
KOHLER DIESEL KDI 31.0 55.4 kw 42 75 hp MORE POWER. SMALLER FOOTPRINT. THE ULTIMATE DIESEL ENGINE. Anybody can add more power to an engine. That s not the hard part. The challenge is increasing the performance
Common-rail SyStem turbocharger and Charge-air Cooler 4 valves
Common- rail System Kohler has selected the most advanced common-rail system available on the market and specifically engineered for extreme durability and longevity within arduous industrial and construction
Standard equipment accessories on demand
Diesel KDI mechanical engines standard equipment Intake manifold Exhaust manifold Side oil refilling Electric starter 55A alternator SAE 4 (7 1/2) abin heating predisposition Oil filter engine mounted
Diesel KDI kw
Diesel KDI 31-55 kw S TA R T I N G F R O M A C L E A N S H E E T, T H E K O H L E R S T R AT E GY F O R T H E D E S I G N O F T H E N E W K D I E N G I N E FA M I LY H A S B E E N FO C U SE D ON UTILISING
KOHLER DIESEL KDI kw hp
KOHLER DIESEL KDI 55 105 kw 75 141 hp innovations AND benefits THE LOWEST FUEL CONSUMPTION IN ITS CLASS The new KDI 3404 offers 10% lower fuel consumption than all competitors in its class. So how did
kohler diesel kdi When it came to creating heavy-duty power for
kohler diesel kdi Tier 4 Final, No DPF No DPF means no heat issues. Ultra-compact design with a better fit for all applications. Cooled EGR helps achieve the industry s toughest emissions standards. When
KOHLER DIESEL KDI kw hp
KOHLER DIESEL KDI 31.0 55.4 kw 42 75 hp MORE POWER. SMALLER FOOTPRINT. THE ULTIMATE DIESEL ENGINE. Anybody can add more power to an engine. That s not the hard part. The challenge is increasing the performance
KOHLER DIRECT INJECTION
KOHLER DIRECT INJECTION S ta r t i n g f r o m a c l e a n s h e e t, t h e Ko h ler s tr ategy for the d e sign o f the ne w K DI engine fa mily h a s been focused on utilising state of the art technology
Diesel KDI kw
Diesel KDI - 100 kw KDI 34. Unique, but not for a unique reason. THE LOWEST FUEL ONSUMPTION IN ITS LASS The new KDI 34 offers fuel consumption more than 10% lower than competitors in its segment, with
LIQUID COOLED DIESEL ENGINES kw hp
LIQUID COOLED DIESEL GINES 8.6 47. kw 11.5 63 hp WATER COOLED DIESEL GINES STANDARD EQUIPMT External spinon type oil filter Exhaust manifold Intake manifold Suction fan Accelerator control Electric starter
DIESEL ENGINES GUIDE
DIESEL ENGINES GUIDE TABLE OF CONTENTS Power Variable Speed Ratings 4 KOHLER Flex 6 Emissions Regulations 7 Engines Compliance 8 Off-Road Engines KDI3404TCR-SCR 10 KDI3404TCR 11 KDI2504TCR 12 KDI2504M
2M kw 3M kw 4M kw MULTICYLINDER IN MODULAR SYSTEM
M-series 5 V 2M41 14.8-28.3 kw 3M41 22.5-43.3 kw 4M41 30.6-57.5 kw MULTICYLINDER IN MODULAR SYSTEM 2M41 3M41 4M41 Design Aircooled 2, 3 and 4-cylinder fourstroke Diesel engines. Grey cast iron crankcase,
1104D-44TG2 1104D-44TG kwm 1500/1800 rpm. ElectropaK. Series. Basic technical data. Performance
1104D-44TG2 1104D-44TG3 56.6-69.0 kwm (Gross) @ 1500/1800 rpm ElectropaK 1100 Series Basic technical data Number of cylinders.....................................................4 Cylinder arrangement...................................
C87 ENT 260 kw ( rpm rpm Stage IIIA / Tier 3
C87 ENT 260 kw (354 HP) @ 2100 rpm - 1500 Nm @ 1400 rpm SPECIFICATIONS Technical code F2CE9687A*EXX Thermodynamic cycle Diesel 4 stroke Air intake TAA Arrangement 6L Bore x Stroke mm 117 x 135 Total displacement
2L41C kw 3L41C kw 4L41C kw
L-series 2L41C 13.5-27 kw 3L41C 20.6-40.9 kw 4L41C 27.0-54.2 kw THE EXTREMELY SILENT INDUSTRIAL MULTI-CYLINDER DIESEL ENGINE 5 2L41C 3L41C 4L41C The HATZ Silent Pack is the quietest engine for equipment
G Series 2G40. 2G kw THE 2-CYLINDER POWER PACKAGE
G Series 7.4-17.0 kw THE 2-CYLINDER POWER PACKAGE 5 Design Aircooled 2-cylinder fourstroke Diesel engine. Vertical cylinder. Crankcase made of alloy, pressure diecasting, parted, vertical in-line cylinders,
Technical Data Series 1204E-E44TA. Basic technical data. Performance
Technical Data 1200 Series 1204E-E44TA Industrial Open Power Unit (IOPU) 74.5 kw @ 2200 Basic technical data Number of cylinders.....................................................4 Cylinder arrangement...................................
Multicylinder Diesel engines in modular system 15-59kW 20-80HP
Multicylinder Diesel engines in modular system -59kW 20-80HP MOTORENFABRIK HATZ D-94099 RUHTORF GERMANY Tel: 0 85 1 / 19-0 Fax: 1 94 18 http://www.hatz-diesel.de email: marketing@hatz-diesel.de 5 / 518
Table of Contents. 3 Engine Overview 4-5 KOHLER Aegis 6-23 KOHLER Command PRO KOHLER Command PRO CS KOHLER Courage KOHLER Diesel
PERFORMANCE ENGINEERING Every part, every component and every system on our engines is guided by Kohler s exclusive Performance Engineering. It s your assurance that every engine we produce will live up
KOHLER COMMAND PRO HP Engines
KOHLER COMMAND PRO 6 14 HP Engines BUILT TO FINISH EVERY JOB IT STARTS. This is what it takes to be a PRO. Performance enhancing features like a heavy-duty air cleaner, forged-steel crankshaft, electronic
Technical Data Series 1206E-E70TTA. Industrial Open Power Unit (IOPU) Performance. Basic technical data
Technical Data 1200 Series 1206E-E70TTA Industrial Open Power Unit (IOPU) 151 kw @ Basic technical data Number of cylinders.....................................................6 Cylinder arrangement...................................
D-series 1D90V/W. 1D90V/W kw AN AIR COOLED ONE CYLINDER DIESEL ENGINE WITH VERTICAL SHAFT
D-series S 1D90V/W 5.8-11.2 kw AN AIR COOLED ONE CYLINDER DIESEL ENGINE WITH VERTICAL SHAFT 1D90V/W 5 1D90V/ W Design Aircooled single-cylinder four stroke Diesel engines. Horizontal cylinder. Crankcase
1106C-70TA. Series. Industrial Open Power Unit. Tier rpm. Basic technical data. Ratings
1106C-70TA Tier 2 162 kw @ 2200 rpm Industrial Open Power Unit 1100 Series Basic technical data Number of cylinders...........................................................6 Cylinder arrangement....................................................
PERFORMANCE ENGINEERING
PERFORMANCE ENGINEERING Every part, every component, every system on a KOHLER engine is guided by our exclusive Performance Engineering standards standards that drive us to operate on the leading edge
Technical Data Series 1206E-E70TTA. Basic technical data. Performance
Technical Data 1200 Series 1206E-E70TTA Electropak 150 kwe @ 1800 rpm Basic technical data Number of cylinders.....................................................6 Cylinder arrangement...................................
Technical Data Series 1206E-E70TTA. Basic technical data. Performance
Technical Data 1200 Series 1206E-E70TTA Industrial Open Power Unit (IOPU) 186 kw @ 2200 Basic technical data Number of cylinders.....................................................6 Cylinder arrangement...................................
KOHLER COMMAND PRO HP Engines
KOHLER COMMAND PRO 19 27 HP Engines THE COMMERCIAL ENGINES THAT BUILT A REPUTATION ON RELIABILITY. For 20 years, landscape professionals have counted on KOHLER Command PRO engines to power their equipment
400 Series 403D-15 Industrial 25.1 kw / rpm
The Perkins 400D range has been developed in consultation with our marketplace. This 1.5 litre, 3 cylinder engine complements the exciting 400 Series product line up, offering customers a choice of compact,
Technical Data. ElectropaK
Technical Data 1100D Series ElectropaK Basic technical data Number of cylinders..................................................... 4 Cylinder arrangement.............................................
DIESEL ENGINES GUIDE
DIESEL ENGINES GUIDE INDEX Power - Variable Speed Ratings 4 Emissions Regulations 6 KOHLER Flex 7 Engines Compliance 8 Off-road Engines KDI-3404TCR-SCR 10 KDI-3404TCR 11 KDI-2504TCR 12 KDI-2504M 13 KDI-1903TCR
KOHLER COMMAND PRO HP Engines
KOHLER COMMAND PRO 19 26.5 HP Engines THE COMMERCIAL ENGINES THAT BUILT A REPUTATION ON RELIABILITY. For 20 years, landscape professionals have counted on KOHLER Command PRO engines to power their equipment
The engine company. The Engine for Construction Equipment ,9 kw hp at rpm
The engine company. The Engine for Construction Equipment. 23 74,9 kw 31 100 hp at 1600 2800 rpm Engine description Type of cooling: Crankcase: Crankcase breather: Cylinder head: Valve arrangement/ Timing:
Cummins Techical Operations ENGINE MODEL 6CTA8.3-C240 CURVE & DATASHEET FR91499 Rev00 Jun/2006 CUMMINS engine 6CTA8.3-C240
Cummins Rev Engine Performance Curve Basic Engine Model: Curve Number: 6CTA8.3-C240 Pg. No : Engine Family: CPL Code: Date: 40399 Displacement: 8.3 L Aspiration: Turbocharged & Aftercooled Bore: 114 mm
GINEERED FOR PERFORMANCE BUILT TO LAST
Your customers work is tough, dirty and downright nasty at times. They need engines that can bite back. Say hello to KOHLER air-cooled diesel engines the alternative for flexible repowering options. Built
The enginewithintegrated water cooling
1500 RPM 400/230 V 50 Hz Type IDGPC 45JD 45 /36 kva/kw (PRP) 49.5 /39.6 kva/kw (LTP) The enginewithintegrated water cooling 45kVA/36kW Johndeere diesel engine generator with ISO and CE certificate Engine:
ENGINEERING ENGINEERING
PERFORMANCE ENGINEERING PERFORMANCE ENGINEERING Engineered to perform in the harshest environments, Quad-Clean all-season four-stage cyclonic air filter a standard on Command PRO 7-1 hp engines protects
Technical data TAD740GE
Technical data TAD740GE General In-line four stroke diesel engine with direct injection Turbo charged and air to air intercooled Rotation direction, anti-clockwise viewed towards flywheel Number of cylinders
Model Number: CH Kohler 23Hp Command Pro Horizontal Engine CH23S PA-CH Exmark. teambrite Supply
S Created on: : Thursday 18 October, 2018 Model Number: CH680-3088 Kohler 23Hp Command Pro Horizontal Engine CH23S PA-CH680-3088 Exmark Manufacturer: Kohler Kohler 23Hp Command V-Twin Engine Electric Start
3406 C Industrial Engine Non-Certified 298 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...165.1 mm (6.5 in) Displacement... 14.64 L (893.39 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...15.9:1
3406 C Industrial Engine Non-Certified 328 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...165.1 mm (6.5 in) Displacement... 14.64 L (893.39 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...14.6:1
400 Series 403D-15 Industrial Open Power Unit 24.2 kw / 32.5 hp
The Perkins 400 Series engine family continues to set new standards in the compact engine market. Developed alongside customers to fulfil their needs in the construction, materials handling, agricultural/turf,
D09. 6 Advertised BHP 343 (460) 2100
CUMMINS ENGINE COMPANY, INC Columbus, Indiana 47202-3005 ENGINE PERFORMANCE CURVE Basic Engine Model: Curve Number: -C460 FR-1914 Engine Family: CPL Code: Date: D09 1921 19Jan95 Construction 1 Displacement:
VOLVO PENTA GENSET ENGINE TAD531GE
VOLVO PENTA GENSET ENGINE TAD531GE 1500 rpm, 102 kw (139 hp) 1800 rpm 111 kw (151 hp) The TAD531GE is a powerful, reliable and economical Generating Set Diesel Engine. Durability & low noise Designed for
3516 Industrial Engine
CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 69.06 L (4,214.3 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
Cummins Techical Operations
Cummins Techical Operations ENGINE MODEL 6BTA5.9-C180 CURVE & DATASHEET FR91536 REV 00 15JUL2006 Basic Engine Model: 6BTA5.9-C180 Engine Performance Curve Engine Family: CPL Code: D40 8541 Displacement:
3512 Industrial Engine
CAT ENGINE SPECIFICATIONS V-12, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 51.8 L (3,161.03 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
Diesel engine D 2866 LE20x Technical Data
page 1 Engine type: Cylinders : Aspiration : Cooling : Lubrication: Injection: Generator: Starter motor: four-stroke, direct-injection 6 cylinder in line, wet replaceable cylinder liners turbocharger,
Performance. Perkins Engines Company Limited. Perkins Engines Company Limited. Peterborough PE1 5FQ United Kingdom Tel: +44 (0)
105 kwm (Gross) @ 1500 rpm ElectropaK 1100 Series Basic technical data Number of cylinders.....................................................4 Cylinder arrangement...................................
3508 B Industrial Engine
CAT ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 ) Aspiration...Turbocharged / SCAC Compression Ratio...14.0:1
Technical data TAD620VE
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel Number of cylinders 6 Displacement, total Firing order s in 3 5,7 348 1-5-3-6-2-4
144 5, ,50 Compression ratio 16,5:1 Dry weight. Engine only, excluding cooling system GenPac. Engine only, excluding cooling system GenPac
General Inline four stroke diesel engine with direct injection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 16,12
ENGINE PERFORMANCE CURVE M3-135 hp ( rpm M2-120 hp ( rpm
Rating: Application: ENGINE PERFORMANCE CURVE M3-135 hp (11 kw) @ 25 rpm M2-12 hp (9 kw) @ rpm Marine POWERTECH.5 L Engine Model: 5TFM5 [Option 16HP / 16HQ]* (179) 339 lb-ft (6 N m) (52) 32 (3) (1) Torque
3406 C Industrial Engine Non-Certified 362 bkw/ rpm
CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...165.1 mm (6.5 in) Displacement... 14.64 L (893.39 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...15.9:1
TECHNICAL SPECIFICATIONS FOR 380/410 KVA, 6 CYLINDER DIESEL GENERATOR SET PACKAGED BY SCOPE OF SUPPLY FOR DIESEL GENERATING SET PACKAGE
MAHINDRA TECHNICAL SPECIFICATIONS FOR 380/410 KVA, 6 CYLINDER DIESEL GENERATOR SET PACKAGED BY ENGINE: Mahindra Scania Internal Combustion (IC) Diesel Engine conforming to BS5514 Standards CPCB Emission
Technical Data 404D-22
Technical Data 404D-22 IOPU Basic technical data Number of cylinders..................................................... 4 Cylinder arrangement....................................verticle in line Cycle............................................................
PERFORMANCE ENGINEERING. from airborne contaminants that can easily clog traditional air filters. Since the Quad-Clean
PERFORMANCE ENGINEERING Engineered to perform in the harshest environments, Quad-Clean all-season four-stage cyclonic air filter a standard on Command PRO 7-1 hp engines protects the engine from airborne
400 Series 404D-22 Industrial Open Power Unit 37 kw / rpm
The Perkins 400D range has been developed in consultation with our marketplace. This 2.2 litre, 4 cylinder engine complete with radiator cooled unit, compliments the exciting 400 Series product line-up,
Kubota Diesel Engine V3300/V3300-T
Kubota Diesel Engine V3300/V3300-T An Ideal Match between Cleaner Exhaust and High Power The Essence of Engine Performance, New Multi-Valve E-TVCS V3300/V3300-T Engines People and environment friendly.
PERFORMANCE ENGINEERING
PERFORMANCE ENGINEERING Every part, every component, every system on our engines is guided by Kohler s exclusive Performance Engineering. It s your assurance that every engine we produce will live up to
PERFORMANCE ENGINEERING
PERFORMANCE ENGINEERING Every part, every component, every system on our engines is guided by Kohler s exclusive Performance Engineering. It s your assurance that every engine we produce will live up to
ENGINE SPECIFICATIONS
No. IS-08-012-0 ( 1/9 ) Rev. 0 ENGINE SPECIFICATIONS Engine Model Base Model : 4LE1(Stage 3A / Interim Tier 4) Model No. : BV-4LE1NYGV-01 Customer EXPORT Application Generator Drawing No. E3-1037-076-0
400 Series 403F-11 Industrial 14.1 kw / rpm
The latest Perkins 400F range of industrial engines is an evolution of the highly successful and productive Perkins 400D range and has been developed specifically to meet the latest set of emissions in
ENGINE SPECIFICATIONS
No. IS-08-173-0 (1/9) Rev. ENGINE SPECIFICATIONS 0 Engine Model Base Model : BH-6HK1X (Intercooler turbo) Model No. : BH-6HK1XYGV-02 Customer EXPORT Application Generator Drawing No. E3-1032-033-0 ( 3D
Technical data TWD1643GE
General Inline four stroke diesel engine with direct injection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total in 3 16,12 983,7 Firing
General In-line four stroke diesel engine with direct injection. Rotation direction, counterclockwise viewed towards flywheel
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
General 4-stroke direct injected, turbocharged and aftercooled diesel engine
General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front Bore Stroke Compression
1012. The engine for construction equipment kw at min -1
1012. The engine for construction equipment. 41-123 kw at 1500-2500 min -1... Engines with integrated cooling system These are the characteristics of the 1012: Modern water-cooled 4- and 6-cylinder in-line
3512 Industrial Engine
CAT ENGINE SPECIFICATIONS V-12, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 51.8 L (3,161.03 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
3508 Industrial Engine
FEATURES Image shown may not reflect actual engine CAT ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 ) Aspiration...Turbocharged
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
Technical Data Series 1103D-33 G3. Diesel engine - Electropak rpm
Technical Data 1100 Series Diesel engine - Electropak 1103D-33 G3 32.3 kwm @ 1500 rpm Basic technical data Number of cylinders..................................................... 3 Cylinder arrangement....................................vertical
No. Date Items New Old Remarks. Regulations,EU certified Stage 3A Stage 2 from 2007~
Revised record SPC-S3L-272(2/9) No. Date Items New Old Remarks Regulations,EU certified Stage 3A Stage 2 from 2007~ 1 Jun.30.2006 Specifications S3L2-Z263SP addition Spec.table 6/9pages addition 2 Oct.26.2006
@Perkins. Technical Data
Technical Data 1100C Series ElectropaK Basic technical data Number of cylinders..................................................... 6 Cylinder arrangement.............................................
Illustrated Parts List
FORM MS 3745 12/21/2006 FILE IN SECT. 2 OF SERVICE MANUAL 613700 Illustrated Parts List Model Series 613700 TYPE NUMBERS 0110. TABLE OF CONTENTS Air Cleaner......................... 6 Alternator..........................
Section 5. Engine data. Engines for power generation. 12-series. Contents. Industrial & Marine Engines. Edition 2007:1
Edition 2007:1 Industrial & Marine Engines Section 5 Engine data Engines for power generation Contents General information... 3 Engine program... 4 Basic data... 6 Technical data and cooling equipment
G TNV88-BDSA. for Industry SPECIFICATIONS & DRAWINGS FOR MASS PRODUCTION
G3-29285-0021 3TNV88-BDSA for Industry SPECIFICATIONS & DRAWINGS FOR MASS PRODUCTION 3.Mar.2008 Contents G3-29285-0021 Drawing No. B3-29285-0010 E3-29005-0010 Z3-19822-0450 G3-29285-0021 Part No. Name
@Perkins. Technical Data Series TAG1A TAG2A TAG3A. Diesel Engine - Electropak. Basic technical data
Technical Data Basic technical data Number of cylinders.................................................... 6 Cylinder arrangement................................... Vertical, In line Cycle....................................4
@Perkins. Technical Data Series 1103C-33TG3. Performance. Basic technical data. Test conditions. Total weight (fan to flywheel)) Sound level
Technical Data @Perkins 1100 Series 1103C-33TG3 Diesel engine - Electropak 45,6 kwm @ 1500 rev/min Basic technical data Number of cylinders.................................................... 3 Cylinder
1106A-70TAG4. Series kwm 1500rpm ElectropaK. Basic technical data
1106A-70TAG4 196.3 kwm (Gross) @ 1500rpm ElectropaK Basic technical data Number of cylinders....................................................................6 Cylinder arrangement...........................................................in-line
1106A-70TAG3. Series kwm 1500rpm ElectropaK. Basic technical data
1106A-70TAG3 180.2 kwm (Gross) @ 1500rpm ElectropaK Basic technical data Number of cylinders....................................................................6 Cylinder arrangement...........................................................in-line
@Perkins. Technical Data Series 2806C-E18TAG1A. Diesel Engine - ElectropaK. Basic technical data. Cyclic irregularity. Ratings.
Technical Data @Perkins 2800 Series 2806C-E18TAG1A Diesel Engine - ElectropaK Basic technical data Number of cylinders..................................................... 6 Cylinder arrangement...................................
C32 ACERT MARINE AUXILIARY/ GENERATOR SET
C32 ACERT MARINE AUXILIARY/ GENERATOR SET 590-994 b (791-1333 b) C32 ACERT Keel Cooled Marine Auxiliary/ Generator Set Images shown may not reflect actual engines SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel
Model name change S4Q2-Y364KL S4Q2 Drawing change 32C C Regulations. EPA interim TIER4,
Revised record SPC-S4Q-342(2/7) No. Date Items New Old Remarks 1 Model name change S4Q2-Y364KL S4Q2 Drawing change 32C00-07780 32C98-55399 Regulations EPA interim TIER4, EPA interim TIER4, EU STAGE 3A
C18 ACERT SPECIFICATIONS. Instrumentation. clear switch, start motor magnetic switch, 15 and 3A Corrosion-resistant sea water aftercooler, air
560 mhp (553 bhp) 412 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions... IMO/EPA Tier 2 Displacement... 18.1 L (1106 cu in) Rated Speed...2100 Bore... 145.0 mm
C18 ACERT SPECIFICATIONS. Instrumentation. clear switch, start motor magnetic switch, 15 and 3A Corrosion-resistant sea water aftercooler, air
460 mhp (454 bhp) 339 bkw Image shown may not reflect actual SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel Emissions... IMO/EPA Tier 2 Displacement... 18.1 L (1106 cu in) Rated Speed...1800 Bore... 145.0 mm
1013. The engine for construction equipment.
1013. The engine for construction equipment.... 63-190 kw at 1500-2300 min -1 Engines with integrated cooling system These are the characteristics of the 1013: Modern water-cooled 4- and 6-cylinder in-line
@Perkins. Technical Data. 1106D-E66TAG3 159, rev/min. 1100D Series. ElectropaK
Technical Data 1100D Series ElectropaK Basic technical data Number of cylinders..................................................... 6 Cylinder arrangement............................................ In-Line
@Perkins. Technical Data. 192, rev/min. ElectropaK
Technical Data 1100D Series ElectropaK @Perkins 1106D-E66TAG4 192,3 kwm @ 1800 rev/min Basic technical data Number of cylinders..................................................... 6 Cylinder arrangement............................................
Mfg. No: 49T G1
Parts Manual Mfg. No: 49T877-0004-G1 Copyright Briggs and Stratton. All Rights reserved 28-Feb-2018 Model Components Table Of Contents Page Blower Housing, Air Cleaner............................................................................
400 Series 404D-22TA Industrial Open Power Unit 46.2 kw / rpm
The Perkins 400D range has been developed in consultation with our marketplace. This 2.2 litre, 4 cylinder, turbocharged engine complete with radiator cooled unit, complements the exciting 400 Series product
G-Drive Engine Data Sheet
6M26D484E200 Speed Ratings Definitions G-Drive Engine Data Sheet Gross Engine Output COP PRP ESP rpm kwm kwm kwm 10 368 440 484 Continuous Power(COP) Prime Power (PRP) (ESP) Mean engine load factor 100%
1013ec. The engine for construction equipment.
1013ec. The engine for construction equipment. 92-235 kw at 2000-2300 rpm Engines with conventional cooling system. These are the characteristics of the 1013ec: Modern water-cooled 4- and 6-cylinder in-line
: see performance curve rev. A : suction 900 mm / discharge 700 mm
PUMPUNIT HK700 PUMP General The HK pump is a single-stage mixed-flow centrifugal pump for lifting large quantities of water to medium heads. The pump is suitable for heavily contaminated and unpurified
KOHLER COMMAND PRO EFI HP Engines
KOHLER COMMAND PRO EFI 19 26.5 HP Engines SAVES YOU CASH. AND LOTS OF IT. Reducing operating costs on a single engine is good. Saving on an entire fleet? Now that could mean big changes for your business.
Engine for Industrial Applications kw hp at 2600 min -1 rpm EU Stage III B / US EPA Tier 4 interim
Engine for Industrial Applications 28-55.9 kw 38-75 hp at 2600 min -1 rpm EU Stage III B / US EPA Tier 4 interim 4 cylinder in-line engines turbocharged, with or without charge air cooler Water-cooled