CHAINS POLYETHYLENE GUIDE RAILS. ROLLER CHAINS TPM page 3 ROLLER CHAINS QRC 5 ROLLER CHAINS CRT 11
|
|
|
- Ada Quinn
- 6 years ago
- Views:
Transcription
1 CINS ROLLER CINS TM page 3 4 ROLLER CINS QRC 5 ROLLER CINS CRT 11 OLYETYLENE GUIDE RILS OLYETYLENE CIN GUIDE RIL 14 METL STEEL OLDER 19
2 ROLLER CINS EUROEN SERIES TM COULING OFFSET
3 ROLLER CINS EUROEN SERIES TM 3 CINS MNUFCTURED BY N ISO 9001 CERTIFIED FCTORY ack of 10m or 100m a 2 SIMLE ISO N. CIN COULING OFFSET b 1 a 2 g f breaking kg/m. NUMBER. NUMBER. NUMBER mm inch min. mm mm max mm max mm max mm cm 2 N. mm 2 = b 1 p g f = resistant surface ,7 1/2 3,3 3,59 7,75 10,2 9,9 0, , ,7 1/2 4,88 4,09 7,75 12,9 10,3 0, , ,7 1/2 4,88 4,09 7,75 14,8 11,15 0, , ,7 1/ , ROLLER CINS EUROEN SERIES TM 4 lease note: all TM chains are subject to pretensioning. This operation is made in order to fix dimension and stretching.
4 ROLLER CINS EUROEN ND MERICN SERIES QRC ( * ) OFFSET SIMLE SIMLE - CLI COULING ONLY FOR RTICLE O5 B1 OFFSET TRILE COULING SIMLE - COTTER IN OFFSET DOUBLE COULING DOUBLE OFFSET TRILE ( ) COULINGS with CLI * COULING TRILE from 04 (B1, B2, B3) to 12 (B1, B2, B3) ( * ) COULINGS with CLI ( ) and/or COTTER IN part number part number (B1, B2, B3) ( ) COULINGS with COTTER IN from 20 (B1, B2, B3) to 32 (B1, B2, B3)
5 5ROLLER CINS EUROEN SERIES QRC ROLLER CINS EUROEN SERIES QRC CINS MNUFCTURED BY N ISO 9001 CERTIFIED FCTORY a 2 b 1 p p p g g g a 2 e e b1 e a 2 b 1 ack of 5m f = resistant surface 4 SIMLE ISO N. COULING OFFSET b 1 a 2 g f breaking kg/m RT NUMBER RT NUMBER RT NUMBER mm inch min. mm mm max mm max mm max mm cm 2 N. min. = 04 B ,80 1,85 4 7,4 5 0, ,12 05 B ,00 2,31 5 8,6 7,11 0, ,18 06 B ,525 3/8 5,72 3,28 6,35 13,5 8,26 0, ,4 08 B ,7 1/2 7,75 4,45 8, ,81 0, ,68 10 B ,875 5/8 9,65 5,08 10,16 19,6 14,73 0, ,91 12 B ,05 3/4 11,68 5,72 12,07 22,7 16,13 0, ,12 16 B , ,02 8,28 15,88 36,1 21,08 2, ,59 16 B con coppiglia 25, ,02 8,28 15,88 36,1 21,08 2, ,59 20 B ,75 1 1/4 19,56 10,19 19,05 43,2 26,42 2, ,68 24 B ,1 1 1/2 25,40 14,63 25,4 53,4 33,4 5, ,85 28 B ,45 1 3/4 30,99 15,9 27,94 65,1 37,08 7, ,56 32 B ,8 2 38,10 17,81 29,21 67,4 42,29 8, ,49 DOUBLE ISO N. COULING OFFSET b 1 a 2 g f breaking kg/m RT NUMBER RT NUMBER RT NUMBER mm inch min. mm mm max mm max mm max mm cm 2 N. mm 2 = 06 B ,525 3/8 5,72 3,28 6,35 23,8 8,26 10,24 0, ,76 08 B ,7 1/2 7,75 4,45 8, ,81 13, ,31 10 B ,875 5/8 9,65 5,08 10,16 36,2 14,73 16,59 1, ,79 12 B ,05 3/4 11,68 5,72 12,07 42,2 16,13 19,46 1, ,22 16 B , ,02 8,28 15, ,08 31,88 4, ,03 16 B con coppiglia 25, ,02 8,28 15, ,08 31,88 4, ,03 20 B ,75 1 1/4 19,56 10,19 19,05 79,7 26,42 35,45 5, ,33 24 B ,1 1 1/2 25,40 14,63 25,4 101,8 33,4 48,36 11, ,5 28 B ,45 1 3/4 30,99 15,9 27,94 124,7 37,08 59,56 14, ,96 32 B ,8 2 30,99 17,81 29, ,29 58,55 16, ,74 TRILE ISO N. COULING OFFSET b 1 a 2 g f breaking kg/m RT NUMBER RT NUMBER RT NUMBER mm inch min. mm mm max mm max mm max mm cm 2 N. mm 2 = 06 B ,525 3/8 5,72 3,28 6, ,26 10,24 0, ,12 08 B ,7 1/2 7,75 4,45 8,51 44,9 11,81 13,92 1, ,94 10 B ,875 5/8 9,65 5,08 10,16 52,8 14,73 16,59 2, ,68 12 B ,05 3/4 11,68 5,72 12,07 61,7 16,13 19,46 2, ,32 16 B , ,02 8,28 15,88 99,9 21,08 31,88 6, ,65 16 B con coppiglia 25, ,02 8,28 15,88 99,9 21,08 31,88 6, ,65 20 B ,75 1 1/4 19,56 10,19 19,05 116,1 26,42 35,45 8, ,96 24 B ,1 1 1/2 25,40 14,63 25,4 150,2 33,4 48,36 16, ,2 28 B ,45 1 3/4 30,99 15,9 27,94 184,3 37,08 59,56 22, ,38 32 B ,8 2 30,99 17,81 29,21 184,5 42,29 58,55 24, ,04 lease note: all QRC chains are subject to pretensioning. This operation is made in order to fix dimension and stretching.
6 6CTENE RULLI SERIE EUROE QRC ROLLER CINS EUROEN SERIES QRC p p CINS MNUFCTURED BY N ISO 9001 CERTIFIED FCTORY g g a 2 b 1 a 2 e b 1 ack of 5m f = resistant surface SIMLE - STINLESS STEEL ISI 304 ISO N. CIN COULING OFFSET b 1 a 2 g e f breaking kg/m. NUMBER. NUMBER. NUMBER mm inch min. mm mm max mm max mm max mm mm cm 2 N. mm 2 = 05 B ,00-3 2,31 5 8,6 7,11 0,11 0, ,18 06 B ,53 3/8 5,72 3,28 6,35 13,5 8,26 0,28 0, ,40 08 B ,70 1/2 7,75 4,45 8, ,81 0,5 0, ,68 10 B ,88 5/8 9,65 5,08 10,16 19,6 14,73 0,67 0, ,91 12 B ,05 3/4 11,68 5,72 12,07 22,7 16,13 0,89 1, ,12 16 B , ,02 8,28 15,88 36,1 21,08 2,1 2, ,59 DOUBLE - STINLESS STEEL ISI 304 ISO N. CIN COULING OFFSET b 1 a 2 g e f breaking kg/m. NUMBER. NUMBER. NUMBER mm inch min. mm mm max mm max mm max mm mm cm 2 N. mm 2 = 06 B ,53 3/8 5,72 3,28 6,35 23,8 8,26 10,24 0, ,35 08 B ,70 1/2 7,75 4,45 8, ,81 13, ,85 10 B ,88 5/8 9,65 5,08 10,16 36,2 14,73 16,59 1, ,50 12 B ,05 3/4 11,68 5,72 12,07 42,2 16,13 19,46 1, ,40 16 B , ,02 8,28 15, ,08 31,88 4, ,78 NICKEL - LTED ISO N. CIN COULING OFFSET b 1 a 2 g f breaking kg/m. NUMBER. NUMBER. NUMBER mm inch min. mm mm max mm max mm max mm cm 2 N. mm 2 = 06 B ,53 3/8 5,72 3,28 6,35 13,5 8,26 0, ,41 08 B ,70 1/2 7,75 4,45 8, ,81 0, ,70 10 B ,88 5/8 9,65 5,08 10,16 19,6 14,73 0, ,95 12 B ,05 3/4 11,68 5,72 12,07 22,7 16,13 0, ,25 16 B , ,02 8,28 15,88 36,1 21,08 2, ,70 lease note: all QRC chains are subject to pretensioning. This operation is made in order to fix dimension and stretching.
7 ROLLER CINS MERICN SERIES QRC 7 CINS MNUFCTURED BY N ISO 9001 CERTIFIED FCTORY lease note: all QRC chains are subject to pretensioning. This operation is made in order to fix dimension and stretching. ack of 5m a 2 b 1 p p p g g g a 2 e e b1 e SIMLE NSI S NSI N. CIN COULING OFFSET b 1 a 2 g f breaking kg/m. NUMBER. NUMBER. NUMBER mm inch min. mm mm max mm max mm max mm cm 2 N. mm 2 = ,525 3/8 4,77 3,58 5,08 13,2 9,05 0, , ,7 1/2 7,95 3,96 7,92 17,8 12,07 0, , ,875 5/8 9,53 5,08 10,16 21,8 15,09 0, , ,05 3/4 12,7 5,94 11,91 26,9 18,08 1, , , ,88 7,92 15,88 33,5 24,13 1, , ,75 1 1/4 19,05 9,53 19,05 41,1 30,18 2, , ,1 1 1/2 25,4 11,1 22,23 50,8 36,2 3, , ,45 1 3/4 25,4 12,7 25,4 54,9 42,24 4, , ,8 2 31,75 14,27 28,58 65,5 48,26 6, ,91 a 2 b 1 f = resistant surface ROLLER CINS MERICN SERIES QRC 4 DOUBLE NSI S NSI N. CIN COULING OFFSET b 1 a 2 g e f breaking kg/m. NUMBER. NUMBER. NUMBER mm inch min. mm mm max mm max mm max mm mm cm 2 N. mm 2 = ,525 3/8 4,77 3,58 5,08 21,6 9,05 10,13 0, , ,7 1/2 7,95 3,96 7,92 32,3 12,07 14,38 0, , ,875 5/8 9,53 5,08 10,16 39,9 15,09 18,11 1, , ,05 3/4 12,7 5,94 11,91 49,8 18,08 22,78 2, , , ,88 7,92 15,88 62,7 24,13 29,29 3, , ,75 1 1/4 19,05 9,53 19, ,18 35,76 5, , ,1 1 1/2 25,4 11,1 22,23 96,3 36,2 45,44 7, , ,45 1 3/4 25,4 12,7 25,4 103,6 42,24 48,87 9, , ,8 2 31,75 14,27 28,58 124,2 48,26 58, ,68 TRILE NSI S NSI N. CIN COULING OFFSET b 1 a 2 g e f breaking kg/m. NUMBER. NUMBER. NUMBER mm inch min. mm mm max mm max mm max mm mm cm 2 N. mm 2 = ,525 3/8 4,77 3,58 5,08 31,8 9,05 10,13 0, , ,7 1/2 7,95 3,96 7,92 46,7 12,07 14,38 1, , ,875 5/8 9,53 5,08 10,16 57,9 15,09 18,11 2, , ,05 3/4 12,7 5,94 11,91 72,6 18,08 22,78 3, , , ,88 7,92 15,88 91,7 24,13 29,29 5, , ,75 1 1/4 19,05 9,53 19, ,18 35,76 7, , ,1 1 1/2 25,4 11,1 22,23 141,7 36,2 45,44 11, , ,45 1 3/4 25,4 12,7 25,4 152,4 42,24 48,87 14, , ,8 2 31,75 14,27 28,58 182,9 48,26 58,55 19, ,45 SIMLE REINFORCED NSI N. CIN COULING OFFSET b 1 a 2 g f breaking kg/m. NUMBER. NUMBER. NUMBER mm inch min. mm mm max mm max mm max mm cm 2 N. min. = ,05 3/4 12,7 5,94 11,91 28,9 18,08 1, , , ,88 7,92 15,88 36,5 24,13 1, ,90
8 8CIN LTE STRIGT QRC CIN LTE STRIGT QRC CINS MNUFCTURED BY N ISO 9001 CERTIFIED FCTORY g p a 2 b 1 a 2 ack of 5m f = resistant surface SIMLE LTE STRIGT ISO N. CIN COULING OFFSET b 1 a 2 g f breaking kg/m. NUMBER. NUMBER. NUMBER mm inch min. mm mm max mm max mm max mm cm 2 N. mm 2 = 08B ,70 1/2 7,75 4,45 8,51 17,0 11,81 0, ,80 10B ,875 5/8 9,65 5,08 10,16 19,6 14,73 0, ,00 12B ,05 3/4 11,68 5,72 12,07 22,7 16,13 0, ,30 16B , ,02 8,28 15,88 36,1 21,08 2, ,90 DOUBLE LTE STRIGT ISO N. CIN COULING OFFSET b 1 a 2 g f breaking kg/m. NUMBER. NUMBER. NUMBER mm inch min. mm mm max mm max mm max mm cm 2 N. mm 2 = 10B ,88 5/8 9,65 5,08 10,16 36,2 14,73 1, ,50 12B ,05 3/4 11,68 5,72 12,07 42,2 16,13 1, ,60 lease note: all QRC chains are subject to pretensioning. This operation is made in order to fix dimension and stretching.
9 9 CINS INS DRILLED QRC CINS INS DRILLED QRC CINS MNUFCTURED BY N ISO 9001 CERTIFIED FCTORY g b 1 p ø F min a 2 ack of 5m f = resistant surface 4 INS DRILLED RIFERIM. CIN COULING OFFSET b 1 a 2 Ø F g f breaking kg/m N.. NUMBER. NUMBER. NUMBER mm inch min. mm mm max mm max mm max mm cm 2 N. mm 2 = 08 B ,7 1/2 7,75 8,51 17,00 4,4 11,7 0, ,50 10 B ,875 5/8 9,65 10,16 21,00 5,1 14 1, ,80 lease note: all QRC chains are subject to pretensioning. This operation is made in order to fix dimension and stretching.
10 TRNSORT CINS CRT COULING 2 TTCKS COULING 1 TTCK COULING BOLTS DRILLED COULING SOLID COULING INS COULING IN SURFCE
11 TRNSORT CINS CRT 11 CINS MNUFCTURED BY N ISO 9001 CERTIFIED FCTORY ack of 5m SOLID COULING INS D6 D5 D2 1/2 F1 F2 f = resistant surface TRNSORT CINS CRT 4 CIN CIN COULING L D2 D5 D6 S F1 F2 breaking kg/m. NUMBER. NUMBER mm mm mm mm mm mm mm mm mm N. mm 2 catena 1, ,5 25 8,35 5,7 18 2,5 25,5 15, ,70 1, , ,8 16, ,90 1, , ,6 19, ,00 1, , ,6 20, ,90 1, , ,6 20, ,70 1, ,9 0 SOLID COULING INS TIE B S F1 L D6 D5 D2 1/2 F1 F2 CIN CIN COULING L D2 D5 D6 S F1 F2 breaking kg/m. NUMBER. NUMBER mm mm mm mm mm mm mm mm mm N. mm 2 catena 1,1400 B , ,6 19, ,50 SOLID COULING INS WIT TTCMENTS a s S L D2 C dh10 F1 b F2 CIN CIN COULING D2 a b c d e s L F2 breaking kg/m. NUMBER. NUMBER mm mm mm mm mm mm mm mm mm mm N. mm 2 attacco ,5 36 2,5 11,5 12, ,51
12 12 TRNSORT CINS CRT TRNSORT CINS CRT a CINS MNUFCTURED BY N ISO 9001 CERTIFIED FCTORY ack of 5m s s L SOLID COULING INS WIT TTCMENTS D2 d1 10 d 10 f c F2 b e f = resistant surface CIN CIN COULING D2 a b c d e s d1 f L F2 breaking kg/m. NUMBER. NUMBER mm mm mm mm mm mm mm mm mm mm mm mm N. mm ,5 36 2, ,5 12, , ,5 48,5 3 8, , , , , , ,63 SOLID COULING INS WIT TTCMENTS s a s L D2 c d 10 b b e e CIN CIN COULING D2 a b c d e s L breaking kg/m. NUMBER. NUMBER mm mm mm mm mm mm mm mm mm N. mm K ,5 36 2,5 11, ,19 SOLID COULING INS WIT TTCMENTS s a s L D2 c d 10 b b e e CIN CIN COULING D2 a b c d e s L breaking kg/m. NUMBER. NUMBER mm mm mm mm mm mm mm mm mm N. mm K ,5 36 2,5 11, ,50
13 TRNSORT CINS CRT 13 CINS MNUFCTURED BY N ISO 9001 CERTIFIED FCTORY ack of 5m MTERIL: STINLESS STEEL S F1 L STUD IERCED D7 D5 D2 1/2 F1 F2 f = resistant surface TRNSORT CINS CRT 4 CIN CIN COULING L D2 D5 D6 D7 S F1 F2 breaking kg/m. NUMBER. NUMBER mm mm mm mm mm mm mm mm mm mm N. mm 2 chain 1, , ,2 20 2, , ,80 1,2250 SS , ,2 20 2, , ,80 1, , , ,00 1, , , ,60 1, , , ,10 1, , , ,60 STUD IERCED D7 D6 D5 D2 CIN CIN COULING L D2 D5 D6 D7 S F1 F2 breaking kg/m. NUMBER. NUMBER mm mm mm mm mm mm mm mm mm mm N. mm 2 chain R ,2 26 2, , ,20 1,3520 Z ,2 26 2, , ,20 GLVNIZED BOLTS DRILLED D7 D6 D5 D2 CIN CIN COULING L D1 D5 D6 D7 S F1 F2 breaking kg/m. NUMBER. NUMBER mm mm mm mm mm mm mm mm mm mm N. mm 2 chain Z ,75 20, ,8 11 8,3 21, ,7 27 1,50 F1 F1 F3 max S L S L S L INS, ROJECTIONS GLVNIZED D6 h9 e3 D6 D5 D1 F1 CIN CIN COULING D2 a b c d e s L F2 breaking kg/m. NUMBER. NUMBER Z ,5 26 2, , ,80 1/2 F1 F2 1/2 F1 F2 F4 max 1/2 F1 F2 e2
14 14 OLYETYLENE CIN GUIDE RIL OLYETYLENE CIN GUIDE RIL Standard length m 2 - m 3-4 on request Material: E-UMW igh molecular weight polyethylene (p.m. other ). Color: green Specific gravity g/cm3 0,945 Dynamic friction coefficient 0.2 ( = 0.05 N/mm2 - V = 0.6 m/s - T = 40 C) Temperature range : -200 C 60 C. For a brief period for contact 80 C. Linear thermal expansion: mm 2 every 10 C from the temperature of 20 C. ROFILE T rofile T CIN Size Guide Weight for SIMLE chain. NUMBER CIN ISO W Kg/m GCT x /8 x7/32 06 B-1 1,5 5,4 0,13 W GCT x /2 x5/16 08 B-1 2,2 7,4 0,18 15 x ,26 20 x ,34 GCT x /8 x3/8 10 B-1 2,6 9,2 0,25 20 x ,35 B GCT x /4 x7/16 12 B-1 2,4 11,3 0,32 20 x ,43 GCT x x17,02 mm 16 B-1 3,5 16,5 0,45 20 x ,68 ROFILE T2 rofile T2 CIN Size Guide Weight for DOUBLE chain. NUMBER CIN ISO M2 W Kg/m M2 GC-T x /8 x7/32 06 B-2 1,5 15,74 5,4 0,22 W GC-T x /2 x5/16 08 B-2 2,2 21,42 7,4 0,30 15 x ,46 20 x ,63 B GC-T x /8 x3/8 10 B-2 2,6 25,79 9,2 0,32 15 x ,54 20 x ,77 GC-T x /4 x7/16 12 B-2 2,4 30,76 11,3 0,62 20 x ,85 GC-T x x17 02 mm 16 B-2 3,5 48,38 16,5 0,86 20 x ,19
15 OLYETYLENE CIN GUIDE RIL 15 Standard length m 2 - m 3-4 on request Material: E-UMW igh molecular weight polyethylene (p.m. other ). Color: green Specific gravity g/cm3 0,945 Dynamic friction coefficient 0.2 ( = 0.05 N/mm2 - V = 0.6 m/s - T = 40 C) Temperature range : -200 C 60 C. For a brief period for contact 80 C. Linear thermal expansion: mm 2 every 10 C from the temperature of 20 C. ROFILE T3 rofile T3 CIN Size Guide Weight for TRILE chain. NUMBER CIN ISO M3 W Kg/m GC-T x /8 x7/32 06 B-3 1,5 25,88 5,4 0,77 OLYETYLENE CIN GUIDE RIL 4 M3 W B GC-T x /2 x5/16 08 B-3 2,2 35,24 7,4 0,82 15 x ,05 20 x ,27 GC-T x /8 x3/8 10 B-3 2,6 42,38 9,2 0,85 15 x ,13 20 x ,40 GC-T x /4 x7/16 12 B-3 2,4 50,22 11,3 0,86 20 x ,16
16 16 OLYETYLENE CIN GUIDE RIL OLYETYLENE CIN GUIDE RIL Standard length m 2 - m 3-4 on request Material: E-UMW igh molecular weight polyethylene (p.m. other ). Color: green Specific gravity g/cm3 0,945 Dynamic friction coefficient 0.2 ( = 0.05 N/mm2 - V = 0.6 m/s - T = 40 C) Temperature range : -200 C 60 C. For a brief period for contact 80 C. Linear thermal expansion: mm 2 every 10 C from the temperature of 20 C. ROFILE E rofile E CIN Size Guide Weight for SIMLE chain. NUMBER CIN ISO M1 W T Kg/m GC-E x /8 x7/32 06 B-1 1,5 15 5,4 4,35 0,19 M1 GC-E x /2 x5/16 08 B-1 2,2 20 7,4 7,2 0,36 T W GC-E x /8 x3/8 10 B-1 2,6 23 9,2 9,5 0,40 GC-E x /4 x7/16 12 B-1 2, ,3 11,11 0,57 B GC-E x x17,02mm 16 B-1 3, ,5 16,48 0,83 ROFILE K rofilo K CIN Size Guide Weight for SIMLE chain. NUMBER CIN ISO D E F G C Kg/m C D E F G GC-K x /8 x7/32 06 B ,8 4 5,6 8,7 9,3 0,43 GC-K x /2 x5/16 08 B-1 12, ,4 11,5 12,8 0,55 GC-K x /8 x3/8 10 B-1 14,8 10,7 6 9,3 13,5 15,4 0,83 GC-K x /4 x7/16 12 B-1 17,5 12,7 7 11,3 15,9 16,9 1,10 GC-K x x17,02 16 B-1 26,8 16,5 9 16,6 25,7 24,4 1,22 B
17 OLYETYLENE CIN GUIDE RIL 17 Standard length m 2 - m 3-4 on request Material: E-UMW igh molecular weight polyethylene (p.m. other ). Color: green Specific gravity g/cm3 0,945 Dynamic friction coefficient 0.2 ( = 0.05 N/mm2 - V = 0.6 m/s - T = 40 C) Temperature range : -200 C 60 C. For a brief period for contact 80 C. Linear thermal expansion: mm 2 every 10 C from the temperature of 20 C. C E F ROFILE U rofile U CIN Size Guide Weight for SIMLE chain. NUMBER CIN ISO M1 W T Kg/m GC-U x /8 x7/32 06 B-1 4,2 4 2,8 9,2 0,26 GC-U x /2 x5/16 08 B-1 4,8 5 3,5 12,7 0,31 GC-U x /8 x3/8 10 B-1 5,1 6 3,6 15,2 0,30 GC-U x /4 x7/16 12 B-1 5,7 7 3,9 16,7 0,40 OLYETYLENE CIN GUIDE RIL 4 B B D ROFILE KG rofilo KG CIN Size Guide Weight for SIMLE chain. NUMBER CIN ISO D E F G C Kg/m GC-KG-08 22,5 x /2 x5/16 08 B-1 C ,7 5 7,4 11,5 12,8 1,30 G F GC-KG-10 22,5 x /8 x3/8 10 B-1 C10 14,9 10,7 6 9,3 13,5 15,4 1,29 GC-KG-12 22,5 x /4 x7/16 12 B-1 C10 17,5 12,3 7 11,3 15,9 16,9 1,28 E C Rail guide suitable for metal holder
18 18 OLYETYLENE CIN GUIDE RIL OLYETYLENE CIN GUIDE RIL Standard length m 2 - m 3-4 on request Material: E-UMW igh molecular weight polyethylene (p.m. other ). Color: green Specific gravity g/cm3 0,945 Dynamic friction coefficient 0.2 ( = 0.05 N/mm2 - V = 0.6 m/s - T = 40 C) Temperature range : -200 C 60 C. For a brief period for contact 80 C. Linear thermal expansion: mm 2 every 10 C from the temperature of 20 C. B W ROFILE CT rofile CT CIN Supp. Size Guide Weight for SIMLE chain. NUMBER CIN ISO met. T W B2 Kg/m GC-CT x /2 x5/16 08 B-1 C3 2,2 17 7,4 20 0,82 GC-CT x /8 x3/8 10 B-1 C3 2,6 17 9,2 20 0,83 T GC-CT x /4 x7/16 12 B-1 C3 2, ,3 20 0,84 GC-CT x x17,02 16 B-1 C5 3, ,5 28 1,24 B1 Rail guide suitable for metal holder W W ROFILE CT2 rofile CT2 CIN Supp. Size Guide Weight for SIMLE chain. NUMBER CIN ISO met. T W B2 Kg/m GC-CT x 15, /8 x7/32 06 B-2 C3 1,5 17 5,4 20 0,74 GC-CT x 21, /2 x5/16 08 B-2 C3 2,2 17 7,4 20 0,84 T GC-CT x 25, /8 x3/8 10 B-2 C5 2,6 19 9,2 28 0,85 GC-CT x 30, /4 x7/16 12 B-2 C5 2, ,3 28 1,25 B1 GC-CT x 48, x17,02 16 B-2 C9 3, ,5 38 2,15 Rail guide suitable for metal holder
19 METL STEEL OLDER 19 Material: GLVNIZED STEEL FE or ISI 304 STEEL rofiles on request is running on customer s design. 4 METL STEEL OLDER GLVNIZED METL CIN length Size Guide Weight SUORT. NUMBER standard m. B D S Kg/m C3 10 x ,3 0,48 D C5 12 x ,5 0,85 S C9 18 x ,5 1,5 C10 24 x ,5 0,95 B STINLESS STEEL SEET METL CIN length Size Guide Weight SUORT. NUMBER standard m. B D S Kg/m C3 10 x ,3 0,48 D C5 12 x ,5 0,85 S C9 18 x ,5 1,5 C10 24 x ,5 0,95 B
20 ELECTRICL MOTORS ND GERBOXES large range of motors and gearboxes developed by Chiaravalli Group Sp and managed by our Logistics in Cavaria con remezzo (Cantalupa). We are able to supply and send any item to catalogue, in over 52 countries, with a minimum lead-time from order receipt.
PARALLEL INDEX DRIVES TP Series
PARALLEL INDEX DRIVES TP Series Calculations J = moment of inertia Application examples Direct driven belt/chain = M B + M B M B = c a n 2π n x t² M R = µ g R m = M B + M R + (M ST )* M ST = m g R M AN
MATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
Simplex roller chains - European design... 9 according to standards čsn , din 8187 and Iso 606
AND BUSH CHAINS Simlex roller chains - Euroean design... 9 according to standards čsn 02 3311, din 8187 and Iso 606 Dulex roller chains - Euroean design... 10 according to standards čsn 02 3311, din 8187
CHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
Free Flow Chain. Free Flow Chain. Top Roller Chain. 2.5x Speed. Low Noise
Double itch Free Flow Chain Free Flow Conveyor his is a conveyor system where the speed of conveyed objects can be freely controlled and stopped at any time and at any position for accumulation or for
ACSR- ROPES Aluminium wire steel reinforced (ACSR conductor)
ACSR- ROPES Aluminium wire steel reinforced (ACSR conductor) The steel reinforced aluminium conductor consists of seven or more aluminium wires applied in concentric layers over a steel core made of one
STEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment
STANDARD CHAINS - SOLID INS ISO STANDARD CHAINS - 1977 RANGE OF CONVEYOR CHAINS STEELS WITH HIGH MECHANICAL STRENGTH improved material RESISTANCE & HARDNESS Increased BREAKING LOADS (see table on next
Simplex, duplex and triplex chains Special chains CHAINS
Simlex, dulex and trilex chains Secial chains CHAINS INDEX CHAINS Pag. s comonents 101 s Transmission roller chains -British Standard DIN 8187 ISO/R 102 Transmission roller chains - American Standard ISO/R
Free Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
& - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best
Design Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
Conveyor track made of section profiles and roller elements
-4 MGE 1. Elements for manual movement Conveyor track made of section profiles and roller elements Economical solution for manual slide sections Roller elements can e clipped in Accessories: Roller elements
WIESEL SPEEDLine WHZ80 with roller guideway and AT toothed belt
WIESEL WHZ80 with roller guideway and AT toothed belt All figures shown in millimeters. Note: Mounted wipers on request. The use of a long power bridge increases the total length. Technical data Linear
The Separator arrangements depend on the application (see order example or separator options).
SLE Energy chains individual solutions large dimensions simple handling The order for a steel chain SLE should contain the following data: Type / Radius x Length / Width - Connector Arrangement ; Separator
Standard Metric Roller Chain (DIN 8180/8187 and BS 228)
Standard Metric Roller (DIN 10/17 and BS 22) Single Roller Size ISO itch p Between Inner lates b 1 2. 2.0.00. 2. 4. 6. 6. 9. 11.6 19.56 0.99.99. 4 Roller d 1. 4.00 5.00 6..51 7.77.16.07 15. 0 27.94 29.21
GACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150
CRBON STEEL / FULL BORE / DN 8 TO DN 150 Carbon steel, forged body full bore ball valve designed to international and European standards FETURES PPLICTIONS Saturated steam. mmonia, natural gas, propane
APEX DYNAMICS. Installation Instruction for Rack and Pinion
APEX DYNAMICS Installation Instruction for Rack and Pinion Overview Why it is so important? Installation of rack onto the machine 1. Installation and Connetction of racks 2. Installation of pinion onto
Pneumatic Rotary Actuators
ALEDER ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
Ball Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
INTERROLL DRUM MOTOR 80i
Product Description Material Versions Applications Characteristics The drum motor is perfect for high torque applications with limited space or access. Small feed conveyors with high-duty cycles Packaging
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers -
MSE03 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
MSE03 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G Modular hydraulic motors MSE03 POCLAIN HYDRAULICS CHARACTERISTICS Motor inertia Noise emissions = 0.01 kg.m² = 60 dba Theoretical torque Max.power
lifgo 5.4 NEW! The special size variant for heavy loads and long strokes
NW! lifgo 5.4 The special size variant for heavy loads and long strokes LNTNI G lifgo -series Gear rack drives for precise, high-speed requirements lifgo 5 is a modular system of gear rack drives featuring
Interroll. Product Description. Material Versions. Technical Data. Options. Order Information. Accessories. Standard Asynchronous
D rum Motor Product Description Material Versions Applications Characteristics The drum motor is perfect for high torque applications with limited space or access. Small feed conveyors with high-duty cycles
Any reproduction, even partial, is allowed only by written permission by Rollco.
EASYSLIDE Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make changes
Standard three-phase voltage: 3x400 V / 50 Hz Special version on request: 3x460 V / 60 Hz CENTRIFUGAL ELECTRONIC PUMPS
CENTRIUGL ELECTRONIC PUMPS KVCE VERTICL XIS MULTISTGE CENTRIUGL PUMPS WIT MCE/P INVERTER TECNICL DT Operating range: from 1 to 12 m 3 /h with head up to 110 metres. Pumped liquid: clean, free of solids
CV-Series. Single Curve Conveyors
CV-Series Single Curve Conveyors J O I N T H E Q U I E T R E V O L U T I O N I N C O N V E Y O R T E C H N O L O G Y V-Series Engineered to have the tightest turning radius in the industry. Built for nearly
TYPE HSRE/HLRE/HTRE H SERIES HIGH PERFORMANCE COUPLINGS
A High Strength Stainless Steel Flexible Membranes B Overload Collars C Trim Balance Holes D Shrouded Bolts A C B D Product Description John Crane s Metastream HSRE/HLRE/HTRE reduced moment couplings use
iglidur J The Fast and Slow Motion Specialist
iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and
RACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
Low friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
SPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół. Sokółka 20...
SPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół Sokółka 20... LIST OF CATALOGUE ITEMS No. Table title Page number 1. Complete lower frame 3 2. Wrapping film feeder 9 3. Movable frame 13 4.
Interroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous
Product Description Material Versions Applications Characteristics This drum motor has been developed especially for applications requiring a strong drive. Small conveyors with high-duty cycles Airport
DA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
About TekMarine. Disclaimer. Copyright
Marine Fenders About TekMarine From its base in the United States, TekMarine Systems LLC designs and supplies advanced marine fendering and mooring systems to ports, harbors and waterways across the world.
Maximum leakage rate is less than half of the AWWA allowable Can be adapted to any channel Low-maintenance gates ***
Maximum leakage rate is less than half of the WW allowable Can be adapted to any channel Low-maintenance gates *** The Fontaine gate is designed to control water flows in channels. It is the same construction
R310EN 2211 ( ) The Drive & Control Company
eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball
RACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
Available in a wide range of metric and English. Special rubber resistant to oils. Code Desc. Di mm DE mm SPE mm 41400***** ***** ***** ***** *****
Sels O-Ring NBR 70 Blck color Avilble in wie rnge of metric n English. Specil rubber resistnt to oils. Di DE SPE 41400***** ***** ***** ***** ***** O-Rings ssortment Content: 16 mesures of O-ring 010 to
Introduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam.
Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load capacity that system life is rarely
TELESCOPIC-LINE. Semi-telescopic-rail LST. Telescopic-rail LSE. Linear guides with ball-cage LSS
TELESCOPIC-LINE Semi-telescopic-rail LST Telescopic-rail LSE Linear guides with ball-cage LSS 1 Ball rails LSS, LST and LSE The ball rails produced by Nadella are very compact and flexible products. Made
Cam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
Interroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous
D rum Motor Product Description Material Versions Applications Characteristics The drum motor is outstandingly robust with a strong torque and can take a high radial load. Conveyors with high-duty cycles
Body Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
DXPE*J /117 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 31
85 320/117 ED DXPE*J DIRECtIONL CONtROL VLVE PILOt OPERtED, WItH OE ND FEEDCK SUPLtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 DXPE7J ISO 4401-07 DXPE8J ISO 4401-08 p max (see performance table) Q
CREATING TOMORROW S SOLUTIONS MOBILITY. e-novation FOR CABLES AND CONNECTORS POWERED BY SILICONES
CREATING TOMORROW S SOLUTIONS MOBILITY e-novation FOR CABLES AND CONNECTORS POWERED BY SILICONES SILICONE CABLES AND CONNECTORS THE POWER HIGHWAY High-performance, silicone cables are required to be the
SolarEdge. StorEdge Solution Applications. Connection and Configuration Guide. For North America Version 1.0
SolarEdge StorEdge Solution Applications Connection and Configuration uide For orth America Version 1.0 StorEdge TM Solution Applications Connection and Configuration (orth America) Contents Introduction
TECHNICAL CATALOGUE BUILD-IN VALVES AND SUPPLY STOPS
TECHNICL CTLOGUE BUILD-IN VLVES ND SUPPLY STOPS TEC ITP Sp, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
Vulkollan & Polyamide Combined Bearings
Vulkollan & Polyamide Combined Bearings Features of Vulkollan & Polyamide Combined Bearings Silent Operation, 8 Profile/Bearing sizes Travel Speeds up to 16 Ft/sec Low Friction from 2RS seals on Ball Bearings
7SP. Stainless Steel Pump AMERICAN STAINLESS PUMPS STAINLESS STEEL PUMPS FOR THE COMMERCIAL MARKETPLACE
7SP Stainless Steel Pump MERICN STINLESS PUMPS STINLESS STEEL PUMPS FOR THE COMMERCIL MRKETPLCE 7SP Stainless Pump Our exclusive design allows for use with easy to locate replacement parts. No more hard
DC Permanent Magnet Core Catalogue
THE WORLDS TRUSTED MNUCTURER O MOTORS ND GERED MOTOR SOLUTIONS OUR ULL RNGE DC MOTORS ND DC GERED MOTORS EXTENSIVE RNGE C MOTORS ND C GERED MOTORS EXTENSIVE RNGE O C MOTORS BRUSHED ND BRUSHLESS UP TO 1
MS25 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
MS25 HYRAULIC MOTORS T E C H N I C A L C A T A L O G Modular hydraulic motors MS25 OCLAIN HYRAULICS CHARACTERISTICS Motor inertia 0.4 kg.m² Theoretical torque Max.power Max. speed Max. pressure Cams with
Table of Contents COOLMANT. 2.0 Table of Contents
CLM 2.0 Table of Contents 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 COOLMANT range, Ø 125 - Ø 315 / SDR 11/SDR 17 (bars) 2.2
Roller chains TPM - QRC pag. 40 Roller chains RCX pag. 43 Conveyor chains CRT pag. 45 Chain guide rails in polyethylene pag. 48
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
3.2 lean SL 5 Technical data & dimension sheets lean SL series Technical data
3.2.1 lean SL series Technical data 3.2 lean SL 5 Technical data & dimension sheets 3.2.1 lean SL series Technical data lean SL lean SL double! Make sure that the article number refers to the correct pinion
CORRUGATED TUBOLAR HEAT EXCHANGERS MULTITUBE INDUSTRIAL SERIE MULTIFLO
Multiflo ORRUT TUOR T XNRS MUTITU INUSTRI SRI mlm MUTIO MS s.r.l ead Office: Str. Martinella 96/b 43100 PRM Tel +39 051.39.71 ax +39 051.64.90.85 actory: Via degli Olmi 31010 O I SNT'URNO TRVISO ROSSO
GU I E S N PR OF R ILE PR S OF GU WIN GUIES GS P ILE R LTIES FOR OFIL S ER FO EL ES L R TS SU PP INS OR TG U IE S Lateral guide T1 T1-01 T1-0 T1-0 T1-07 T1-09 T1- T1- T1-1 T1-1 T1- T1- T1- T1-1 T1- T1-
TELESCOPIC RAIL HEAVY
TELESCOPIC RAIL HEAVY Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right
Product Catalogue. Version 8.0. Section. FUWA Axle Components
Product Catalogue Section E Version 8.0 FUWA Section E Fuwa - Cam and Brake Assembly E:48 PRODUCT CATALOGUE 8.0 Fuwa - Cam and Brake Assembly Part List - 6 axle tube (square) - 5 axle tube (round) TL-11-427-800045
TYPE HSFE/HLFE/HTFE H SERIES HIGH PERFORMANCE COUPLINGS
A High Strength Stainless Steel Flexible Membranes B Overload Collars C Flanged Connections D Shrouded bolts B C D A Product Description John Crane s HSFE/HLFE/HTFE s feature a factory assembled transmission
Cross Tensioners. Frames. Bearings. Springs. Mounting Holes. Adjustment Marks
Cross Tensioners Cross Tensioners provide constant belt or chain tension. Their automatic tensioning action translates into improved performance and extended life for most types of fixed-centre drives.
DRUM MOTOR 113LP 113.5Ø 0.06kW kW, with planetary gearbox in polymer or polymer / steel combination for non-continuous operation
16 DRUM MOTOR UNIT HANDLING DRUM MOTOR 11LP 11.5Ø 0.06kW - 0.7kW, with planetary gearbox Product description This Pulley is the ideal operator for light and medium conveyors, for non-continuous use. Characteristics
RIGHT ANGLE DRIVES TG Series
RIGHT ANGLE DRIVES TG Series Right Angle Fixed Index Drives TG Series The rotary index table transforms a constant input drive motion into an intermittent output drive motion. The intermittent drive motion
iglidur G The General Purpose Bearing
iglidur The eneral Purpose Bearing Most popular iglidur material worldwide. iglidur bearings cover an extremely wide range of different requirements they are truly all round. Typical applications cover
The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
TORQUE HTD - CMT MUSTANG 8M - 14M SYNCHRONOUS BELT - CHD CMT APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
TORQUE HTD - CMT Performance index These heavy-duty synchronous belts are specifically designed for high torque applications at low speed. TORQUE belts are among the best performing HTD profiled belts
Small Footprint Big Cutting Capacity
Just what you need! Small Footprint Big Cutting Capacity 1000 Y Axis Travel FOCUS SEIKI CORP No.11, Lane 181, Da Ming Road, Shengang Dist.,Taichung City, 42949 Taiwan Tel: +886-4-2529-5611 Fax:+886-4-2529-5613
Roller chains H-Series American type. High Performance from Rexnord. The right chain!
High Performance from Rexnord Roller chains H-Series American type Highly robust & durable through reinforced plates H-Series - American type High Performance from Rexnord. Inner Reinforced, fatigue resistant
Chain return components
42 HD Polyethylene High Density Self-lubricating ROLLER 12303V 12303N 12307V 12307N 128V 128N 128V 128N 12 12 Cod. 12304N Cod. 12303V Cod. 12863N ROLLER 12895V 12895N 12896V 12896N 12897V 12897N 12862V
Special conveyor chains
56 Secial conveyor chains iwis offers an extensive rogram of secial chains for various industrial alications and requirements. While the late chain is being used wherever smooth and reliable conveying
Bonstrand PSX L3, PSX L3C, PSX JF and PSX JFC Polysiloxane-phenolic Fire-resistant Fiberglass Pipe and Fittings
Bonstrand PSX L3, PSX L3C, PSX JF and PSX JFC Polysiloxane-phenolic Fire-resistant Fiberglass Pipe and Fittings For offshore platforms, marine and onshore service Description Bondstrand PSX JF and PSX
NSK Standard Ball Screws High Speed SS Series
NSK Standard Ball Screws igh Speed SS Series NSK s high speed and low noise ball screws provide high-level performance for drive systems of industrial machines such as those used in manufacturing. standard
Cam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
BACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012
CKFLOW PREVENTERS DUL-CHECK CKFLOW PREVENTER WITH TMOSPHERIC VENT T/S-459 Certified to SSE Standard 1012 Certified to CS Standard 64.3 Forged brass construction Threaded or sweat true union end connections
ARMYLOR PTFE BELLOWS & COMPENSATORS
ARMYLOR PTFE BELLOWS & COMPENSATORS CONTENT MERSEN ANTICORROSION EQUIPMENT p.2 RANGE OF BELLOWS & COMPENSATORS p.3 REFERENCES p.4 TECHNICAL SPECIFICATIONS p.5-6 BELLOW FLANGES p.7 COMPENSATOR FLANGES p.8
Highway Plus Riveted Brake Shoe Range
RivetedBrakeShoes Highway Plus Riveted Brake Shoe Range Product range summary 2 AF700 Brake Lining specifications 3 Brake Shoe range and diagrams 4-11 P a g e 2 Product range BRAKE SHOES HP405-BC361NG
Table of Contents 2.0 COOLFLEX CLX. 2.0 Table of Contents
Table of Contents CLX 2.0 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 range, DN 20 - DN 125 / SDR 11 (coils) 2.2 Planning, design
PK couplings. Product description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
Product description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
DURAVAR UHMW-PE ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE INDUSTRIAL MARKET PROFILES SHAPES PRODUCT GUIDE
UHMWPE ULTRHIGH MOLECULR WEIGHT POLYETHYLENE INDUSTRIL MRKET PROFILES SHPES PRODUCT GUIDE WELCOME TO RTEK Manufacturer of Duravar UltraHigh Molecular Weight Polyethylene RTEK OPTIONS & SERVICES Virgin
ISSUE 1/08/14 B E A R I N G S A N D C O M P O N E N T S Contents Company Profile Products Wrapped Bearings Technical Information WMU & WMXMU & WMX Wrapped Bearings Metric Plain U Type Wrapped Bearings
SPARE PARTS LIST RIDERS R322T AWD, , , ,
SPARE PARTS LIST RIDERS R322T AWD, 966785801, 967032101, 967153001, 2012-03 103CM CUTTING DECK R322T AWD, 966785801, 967032101, 967153001, 2012-03 103CM CUTTING DECK R322T AWD, 966785801, 967032101, 967153001,
Tension Cords. HPL high performance cords: the cord cross section is increased compared with standard. This results in a lower belt
www.sitspa.com ELATECH M and V The timing elts manufactured y ELATECH have een designed to comply with every need of the design engineer in linear motion, power transmission and in conveying applications
Drum brakes According to DIN
Drum brakes According to DIN 15 435 Drum brakes According to DIN 15 435 Industrial Brakes Thrusters Pressure Oil Pumps Couplings Hydraulic Buffers Cellular Buffers Rail Pliers Sheaves Hook Blocks Crane
Free Flow Chain U.S. TSUBAKI FREE FLOW CHAIN B - CONVEYOR CHAINS
U.S. TSUBAKI FREE FLOW CHAIN Free Flow Chain Free Flow Conveyor this is a conveyor system where the speed of conveyed objects can be freely controlled and stopped at any time and at any position for accumulation
Linear telescopic lifting columns
Linear telescopic lifting columns dynamic capacity up to 11 tons ( kn) standard lift stroke up to 23 feet (7 m), higher lift stroke available high speed / high cycle systems SERAPID lift systems provide
Metric Chain Attachments
Page 1 Attachment Assemble to order Metric.pdf Date 0/0/1 Metric Attachments A1 WA-1 K1 WK-1 R1 A1, K1 and R1 Connector Links and Inner Links p b 2 g F B m D L I F H s 2.2.. 7.1.2,000.. 1.. 0. 1.2 4 4
GRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
TELESCOPIC RAILS HARDENED TELESCOPIC RAILS FOR HIGHLY DYNAMIC APPLICATIONS 7.1 PRODUCT OVERVIEW 7.2 PART EXTENSIONS 7.
7 TELESCOPIC RAILS HARDENED TELESCOPIC RAILS FOR HIGHLY DYNAMIC APPLICATIONS PAGE 106 PAGE 116 PAGE 120 PAGE 126 7.1 PRODUCT OVERVIEW 7.2 PART EXTENSIONS 7.3 FULL EXTENSIONS 7.4 LINEAR GUIDES 105 PRODUCT
SYSTEM KAN-therm Push Platinum
SYSTEM KAN-therm Push Platinum ISO 9001 TECHNOLOGY OF SUCCESS Contents Page System KAN-therm Push Platinum - General information... 3 Multi-layer PE-Xc/Al/PE-HD Platinum pipes... 5 Parameters of multi-layer
POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials:
DU series bushes (PAP P10 / EGB E40) maintenance-free
Characteristics 1. PTFE 0,01-0,03 mm 2. Porous bronze 0,20-0,30 mm 3. Steel backing 0,40-2,20 mm 4. Tin or copper plating ~ 0,005-0,008 mm Usage: DU bushes are widely used in hydraulic vehicles, automobiles,
ANTI-BLOWOUT SYSTEM MOUNTING VARIATIONS. NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: UNI 6060:
4 5 1 2 6 8 7 3 92 1 2 3 NOMINL VLUES: Pressure rating max 115 PSI Temperature range: Pre lubricated for life of actuator on assembly From MOD. 52 up to 140 supply chambers MOD. 160-200-270 Standard polyester
SPARE PARTS LIST RIDERS R220T, , , ,
SPARE PARTS LIST RIDERS R220T, 966785701, 967032001, 967150901, 103CM CUTTING DECK R220T, 966785701, 967032001, 967150901, 103CM CUTTING DECK R220T, 966785701, 967032001, 967150901, Ref Part no. Description
S ST-SeriesBrochure_modified:STSeriesBrochure.qxd2/4/20091:32PMPage17 ST- T Series Straight Conveyors -Series your Material Handling Specialist
ST-Series ST-SeriesBrochure_modified:ST Series Brochure.qxd 2/4/2009 1:32 PM Page 17 ST-Series Straight Conveyors your Material Handling Specialist ST-SeriesBrochure_modified:ST Series Brochure.qxd 2/4/2009
CO 2. High Pressure Design. (> 500 psi per API 15HR & 15S) Design Life - 20 years at full rating
Fiberspar Line Pipe (High Pressure - Product Data) OIL & GAS MINING Applications Pipeline Rehabilitation Production Lines or Injection Lines Transfer Lines or Disposal Lines Oil, Gas, Saltwater CO 2 and
the future of firefighting TM nozzles
the future of firefighting TM nozzles Unifire OUTPUT UNIFIRE OUTPUT 12 UNIFIRE OUT 2 Straight model Pistol grip NEW!!! UNIFIRE OUTPUT - New Professional firefighting nozzle that puts safety of the operator
Low Voltage Alternators - 4 pole LSA 44.3
LSA 44.3 70 to 150 kva - 50 Hz / 88 to 188 kva - 60 Hz Electrical and mechanical data Specially adapted to applications The LSA 44.3 alternator is designed to be suitable for typical generator applications,
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology