Conveyor track made of section profiles and roller elements

Size: px
Start display at page:

Download "Conveyor track made of section profiles and roller elements"

Transcription

1 -4 MGE 1. Elements for manual movement Conveyor track made of section profiles and roller elements Economical solution for manual slide sections Roller elements can e clipped in Accessories: Roller elements (p. -) 199 SP /R A l x = = 5, cm 4, cm4 l y = 11,7 cm4 W x =,4 cm W y = 5, cm m = 1,4 kg/m 6,5 y Section profile SP /R / L x 16,5 0,5,1 199 Bosch Rexroth AG, (0-0)

2 Elements for manual movement MGE SP /B A l x =,4 cm = 49,6 cm4 l y =, cm4 W x =,1 cm W y = 11,5 cm m =, kg/m 9 ø5,5 SP /B section profile Slot 1 pcs / L 16 pcs Accessories: QV cross connector, (s. -4) SP /B-50 A = 6,9 cm l x = 46, cm4 l y = 16,9 cm4 W x = 5, cm W y = 7,5 cm m = 1,9 kg/m 5 50 SP /B-50 section profile Slot 1 pcs / / L 0 pcs / ,5 14 SP /B-0 A l x = 11,9 cm = 95,1 cm4 l y = 0,4 cm4 W x = 0,0 cm W y = 1,5 cm m =, kg/m 9 SP /B-0 section profile Slot 1 pcs / L 16 pcs Accessories: QV cross connector, (s. -4) Bosch Rexroth AG, (0-0)

3 -6 MGE 1. Elements for manual movement SP /BH A l x =,4 cm = 5,7 cm4 l y =,6 cm4 W x = 14,0 cm W y = 1, cm m =, kg/m 6 Section Profile SP /BH Slot 1 pcs / L 16 pcs Accessories: QV cross connector, (s. -4) Bosch Rexroth AG, (0-0)

4 Elements for manual movement MGE Conveyor sections made of SP 4/R section profiles and accumulation roller chains 1 For constructing manual slide sections with high earing loads (up to kg/cm) For applications with and without workpiece pallets Low friction Steel chain with support wheels made of PA ST 4/R Section ST 4/R / L FP 4/R Guide profile: PA x section profile SP 4/R x guide profile FP 4/R Condition on delivery: Fully assemled Accessories: Accumulation roller chain (p. -9) QV 4 cross connector, (s. -9) ,5 SP 4/R 15 16, Bosch Rexroth AG, (0-0)

5 - MGE 1. Elements for manual movement SP 4/R A = 6,1 cm l x =,0 cm4 l y = 95,5 cm4 W x = 4,6 cm W y = 16,41 cm m =,5 kg/m + 1,0 FP 4/R Section profile SP 4/R pcs Accessories: Guide profile FP 4/R Accumulation roller chain (p. -9) QV 4 cross connector, (s. -9),5 67,5 1 7, FP 4/R 1 Guide profile FP 4/R pcs ,5 1,5 PA (anti-static) Bosch Rexroth AG, (0-0)

6 Elements for manual movement MGE Accumulation roller chain Support wheel: PA Accumulation roller chain: steel Support roller: see ordering tale ø6 19,05 (/4 ) incl. chain coupling Accessories: additional chain coupling ( ) Chain coupling for extending accumulation roller chains 6 Master link No Steel mm Cross connector QV 4 for connecting two section profiles For defining the track width 11 -±0, QV 4 cross connector (mm) No / 1 l Bosch Rexroth AG, (0-0)

7 60-40 MGE 1. Elements for manual movement Conveyor sections made of SP section profiles and accumulation roller chains For constructing manual slide sections with high earing loads (up to.0 kg/cm) For applications with and without workpiece pallets Accumulation roller chain with and without small parts trap 1999 ST /R-0 Customizale section with plastic guide profile Section ST /R-0 FP /L Slide profile, guide profile: PA 40 x section profile SP /R-0 x guide profile FP x slide profile GP 6,5 0 0 GP Condition on delivery: Fully assemled Accessories: Accumulation roller chain (p. -4) Accumulation roller chain with small parts trap (p. -4) Cross connector QV, QV -H (p. -4) Bosch Rexroth AG, (0-0)

8 Elements for manual movement MGE ST /R-0-ST Section ST /R-0 ST / L 1 6, GP /ST FP GP Condition on delivery: Slide profile: Steel Guide profile: PA Guide profile for accumulation roller chain: PE x section profile SP /R-0 x guide profile FP 4 x slide profile GP 4 x slide profile GP /ST x guide profile for accumulation roller chain Fully assemled Accessories: Accumulation roller chain (p. -4) Accumulation roller chain with small parts trap (p. -4) Cross connector QV, QV -H (p. -4) SP /R-0 A = 16,4 cm l x = 144,0 cm4 l y = 40,1 cm4 W x = 7,7 cm W y =, cm m = 4,4 kg/m FP + 15 SP /R-0 section profile 16 pcs Accessories: PA guide and slide profile (p. -4) ST guide and slide profile (p. -4) , GP Bosch Rexroth AG, (0-0)

9 L L -4 MGE 1. Elements for manual movement SP /R-H A = 19,0 cm l x = 155,6 cm4 l y = 51, cm4 W x = 1,6 cm W y = 1, cm m = 5, kg/m FP /H-S SP /R-H section profile pcs Accessories: Guide profile FP /H-ST Slide profile GP /H-KST Slide profile GP /H-ST GP /H , GP FP L PA guide and slide profile No. PA (anti-static) 64 x slide profile GP (L = 6000 mm) 16 x guide profile FP (L = 6000 mm) GP /ST Guide and Slide Profile ST No GP /ST: steel; corrosion-resistant Guide profile for accumulation roller chain: PE x slide profile GP /ST (L = 000 mm) 4 x guide profile for accumulation roller chain (L = 000 mm) FP/H-ST Guide profile L (mm) No. FP /H-ST 4 pcs 000 steel; corrosion-resistant L 197 GP /H... Slide profiles L (mm) No. GP /H-ST 4 pcs 000 GP /H-KST 4 pcs 000 H-KST: PA (anti-static) H-ST: steel; corrosion-resistant Bosch Rexroth AG, (0-0)

10 Elements for manual movement MGE mm -75±0, Cross connector QV for connecting two section profiles For defining the track width 1 QV cross connector (mm) No / l Fastening material: Steel Strut profile x60, x QV mounting kit (p. -6) mm -75±0, Cross connector QV -H for connecting two section profiles For heavy applications For defining the track width 6 7 QV -H cross connector (mm) No l / Fastening material: Steel Strut profile x60, 4 x QV mounting kit (p. -6) 9 7,1 F max Accumulation roller chain F max (kg/cm) 11 Support wheel: PA Support wheel: Steel.0 1) /1.5 ) ø16,7 1) When using slide profile GP /ST ) When using slide profile GP Accumulation roller chain: steel Support wheel: see ordering tale incl. chain coupling Accessories: additional chain coupling ( ) 15 7,1 F max Accumulation roller chain with small parts trap F max (kg/cm) 16 Support wheel: PA Support wheel: Steel.0 1) /1.5 ) ,7 1) When using slide profile GP /ST ) When using slide profile GP 1 ø16 Accumulation roller chain: steel Support wheel: see ordering tale incl. chain coupling Accessories: additional chain coupling ( ) 0 Chain coupling for extending accumulation roller chains 1 Master link Steel No Bosch Rexroth AG, (0-0)

Cam roller guide LF6S complete axis

Cam roller guide LF6S complete axis Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto

More information

EcoFlow Manual roller sections bring everything closer

EcoFlow Manual roller sections bring everything closer 120 MPS 5.0 EcoFlow linking elements 842 58 281 (201-11) EcoFlow Manual roller sections ring everything closer The manual linkage of workstations with EcoFlow eases worker strain ecause products and workpiece

More information

Cam roller guide LF12S complete axis

Cam roller guide LF12S complete axis Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto

More information

Linear guides MGE 13.2 Linear guides

Linear guides MGE 13.2 Linear guides 13-2 MGE 13.2 Linear guides Linear guides For constructing linear guides based on cam roller guides Cam roller guides are suitable for applications with high speeds and medium loads, in particular for

More information

Proximity switches and switch brackets

Proximity switches and switch brackets Proximity switches and switch brackets MGE.0 - Proximity switches and switch brackets 5 7 SH /S (p. -) SH /U (p. -) SH /S, SH /ST (p. -) SH /S-H (p. -5) 9 SH /U (p. -) SH /U-H (p. -7) Proximity switch

More information

Doors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)

Doors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5) Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable

More information

Outstanding features. 62 Bosch Rexroth Corporation Roller Rail Systems R310A 2302 ( ) Standard Guide Rails, Steel version

Outstanding features. 62 Bosch Rexroth Corporation Roller Rail Systems R310A 2302 ( ) Standard Guide Rails, Steel version 62 Bosch Rexroth Corporation Roller Rail Systems R310302 (2007.06) Outstanding features Guide rails with hardened raceways and ground on all sides Corrosion-resistant guide rails in Resist CR, matte silver

More information

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer

Conveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear

More information

SUPPORT ALU. Aluminium Support ECA ERA EMST ETS.

SUPPORT ALU. Aluminium Support ECA ERA EMST ETS. www.easy-conveyors.com SUPPORT ALU ECA ERA EMST ETS Aluminium Support The conveyors are held in place by a well balanced range of support components, with beam support brackets, support beams, feet, etc.

More information

Section 10 Conveyors and Transport Components

Section 10 Conveyors and Transport Components 1 Section Conveyors and Transport Components Roller elements, roller profiles, support rollers, and other components are perfect to set up lean manufacturing work cells. These non-powered roller elements

More information

TS 5 Transfer System Version 2.0

TS 5 Transfer System Version 2.0 Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service TS Transfer System Version.0 The Drive & Control Company 0 Bosch Rexroth AG TS.0 3 0 30 (00. Symbols No.

More information

mk Roller Conveyors mk Conveyor Technology 240

mk Roller Conveyors mk Conveyor Technology 240 mk Roller Conveyors mk Conveyor Technology 240 Contents mk Roller Conveyors RBS-P 2065/2066 242 RBS-P 2255 246 RBT-P 2255 250 RBM-P 2255 254 Rollers 258 Application Examples 260 mk Conveyor Technology

More information

Conveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2

Conveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2 Conveyor System Description 140mm width thermoplastic chain with aluminium frame conveyor system. Also available with stainless steel frame, please refer section. Examples of application industries Personal

More information

VarioFlow Lateral Guide Generation 2. Customer Presentation

VarioFlow Lateral Guide Generation 2. Customer Presentation VarioFlow Lateral Guide Generation 2 Customer Presentation Market Requirements Your requirements: A compact, clearly designed lateral guide system for numerous standard applications and customized solutions

More information

Number of fingers 2. Max. particle size 5 µm. Pressure for determining forces

Number of fingers 2. Max. particle size 5 µm. Pressure for determining forces Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed

More information

FIX-WHEEL RAILS. rationalisation, transportation, automation

FIX-WHEEL RAILS. rationalisation, transportation, automation FIX-WHEE RIS DBGM rationalisation, transportation, automation IN SOCK he following items can always be delivered immediately from stock: CCESSORIES broad range of standard accessories supplements and simplifies

More information

FMB-DDSP Belt for High Load and Low Load Pulleys

FMB-DDSP Belt for High Load and Low Load Pulleys FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30

More information

EcoShape the Tubular Framing System. Customer Presentation

EcoShape the Tubular Framing System. Customer Presentation EcoShape the Tubular Framing System Customer Presentation Market Requirements Your requirements: Quick, simple, and cost-efficient implementation of flow racks, workstations, and material shuttles for

More information

TSplus Carousel Configuration Basic Equipment Guide

TSplus Carousel Configuration Basic Equipment Guide TSplus Carousel Configuration Basic Equipment Guide R980 500 388 (6.2010) TSplus Carousel Basic Equipment Guide Bosch Rexroth Corporation 2 Table of Contents Important Safety Infomation... 3 Introduction...

More information

Section 5 Transverse Conveyors

Section 5 Transverse Conveyors 8981 00 22 11/07 TS4plus inear Motion and Assembly Technologies Bosch Rexroth Corp. -1 Section Transverse Conveyors BS4 are designed to transfer pallets for short transport distances (e.g. between two

More information

GoTo Europe Focused Delivery Program. Product overview assembly technology

GoTo Europe Focused Delivery Program. Product overview assembly technology GoTo Europe Focused Delivery Program Product overview assembly technology 2 GoTo Europe Products you need, delivered when you need them In today s global competition every day counts. Fast response times

More information

CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company

CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology

More information

Modular. Machine Guard System. Version 5.2. Product Catalogue. Assembly Technology

Modular. Machine Guard System. Version 5.2. Product Catalogue. Assembly Technology Product Catalogue Machine Guard System Version 5.2 Company Information Profession Devotion Keep Improving Company Information Planning Software Complete product info CAD library Quick & Easy configurator

More information

McKenzie s Low Profile Modular Belt Conveyor provides the design flexibility needed to meet your requirements.

McKenzie s Low Profile Modular Belt Conveyor provides the design flexibility needed to meet your requirements. McKenzie Handling Systems has been designing and manufacturing standard and custom belt conveyors since its incorporation in 1985. Belt types for all your applications Permanently Sealed Bearings T-slots

More information

Modular transfer plates with rollers

Modular transfer plates with rollers Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra

More information

The Drive & Control Company

The Drive & Control Company Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service TS pv Version. The Drive & Control Company 0 Bosch Rexroth AG TS pv. 8 0 (06-0) Symbols 0 Permissible

More information

Transfersystem TS 5. Preview. The Drive & Control Company. Electric Drives and Controls. Linear Motion and Assembly Technologies Pneumatics Service

Transfersystem TS 5. Preview. The Drive & Control Company. Electric Drives and Controls. Linear Motion and Assembly Technologies Pneumatics Service Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Transfersystem TS Preview The Drive & Control Company 3 8 0 380 (008.09) TS Bosch Rexroth AG Table of

More information

Chain return components

Chain return components 42 HD Polyethylene High Density Self-lubricating ROLLER 12303V 12303N 12307V 12307N 128V 128N 128V 128N 12 12 Cod. 12304N Cod. 12303V Cod. 12863N ROLLER 12895V 12895N 12896V 12896N 12897V 12897N 12862V

More information

Aluminium Profile Catalog Version 1.0 English

Aluminium Profile Catalog Version 1.0 English Aluminium Profile Catalog - 2008 Version 1.0 English Product Range Aluminium Profile and Accessories - Extruded aluminium profiles - Joining elements - Levelling feet - End covers and slot covers Assembly

More information

Vulkollan & Polyamide Combined Bearings

Vulkollan & Polyamide Combined Bearings Vulkollan & Polyamide Combined Bearings Features of Vulkollan & Polyamide Combined Bearings Silent Operation, 8 Profile/Bearing sizes Travel Speeds up to 16 Ft/sec Low Friction from 2RS seals on Ball Bearings

More information

TS 5 transfer system 4.0

TS 5 transfer system 4.0 TS 5 transfer system.0 0- TS 5.0 System overview TS 5 system overview Workpiece pallet Drive unit See page - See page -6 See page -0 See page -3 Longitudinal conveyor See page 3- See page 3-9 See page

More information

Linear Axes Technical Data Summary

Linear Axes Technical Data Summary components Technical Data Summary Pneumatic Axes Electrical Axes LM 6 P LM 8 P LM 8 PV LM 10 P LM 6 PE LM 8 PE LM 8 PEV LM 10 PE Standard stroke lengths [mm]: h 0-150 Overall length [mm]: L 408 468 468

More information

300mm Conveyor System

300mm Conveyor System 300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width

More information

BS 2/K Transverse Conveyor

BS 2/K Transverse Conveyor Modular Transfer Systems BS 2/K Transverse Conveyor for TSplus Conveyors Installation and Maintenance Guide Publication Number: 8981 500 207 11/00 2 Table of Contents INTRODUCTION... 3 TECHNICAL DATA...

More information

camoline Cartesian Motion Building System R310EN 2605 ( )

camoline Cartesian Motion Building System R310EN 2605 ( ) camoline Cartesian Motion Building System R310EN 2605 (2009.08) The Drive & Control Company Modularity for best effectiveness Efficient Handling Solutions more than just a system Bosch Rexroth AG 2 Our

More information

Sliding Door Fittings, Roller Shutters Vertical Sliding Door Fittings

Sliding Door Fittings, Roller Shutters Vertical Sliding Door Fittings Vertico 16 VF, door weight up to 15 kg, for 2 bi-parting doors Door height: 300 600 mm Door thickness: Min. 16 mm Side panel thickness: Min. 1 mm Running gear: Top and bottom running, 4 rollers, with ball

More information

FS SERIES. FS Series Characteristic Beam Width: 65mm Product Width: Refer to Guide Rail Assembly

FS SERIES. FS Series Characteristic Beam Width: 65mm Product Width: Refer to Guide Rail Assembly SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width to be conveyed can be referred to guide rail assembly

More information

Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR

Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR 9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller

More information

GD 1000 series. Made for ADVANCE 1/99 FORM NUMBER

GD 1000 series. Made for ADVANCE 1/99 FORM NUMBER GD 000 series Parts list for model: GD 005-0-0V: 08700 GD 00-0-0V: 08800 GDS 00-0-0V: 08900 HDS 005-0-0V: 08600 Made for ADVANCE /99 FORM NUMBER 56045 TABLE OF CONTENTS SERVICE KIT GD 005, GD 00, GDS 00

More information

Runner block FNS R Flanged, normal, standard height

Runner block FNS R Flanged, normal, standard height 38 Bosch Rexroth Corporation Roller Rail Systems R310A 30 (007.06) Standard Runner Blocks, Steel version Runner block FS R1851... 10 Flanged, normal, standard height Further runner block versions with

More information

Description 315 mm width thermoplastic belt with aluminium frame conveyor system

Description 315 mm width thermoplastic belt with aluminium frame conveyor system AP DF2 DR2 DT2 DX2 DL2 DM3 DS2 MA MB MG MF2 MR2 MT2 MX2 ML2 MM3 MS2 TR Conveyor System DT2 Description 315 mm width thermoplastic belt with aluminium frame conveyor system Examples of application industries

More information

Material Handling System

Material Handling System 72 The versatile Material Handling System Modern factories are geared towards high speed production. Time pressure increases constantly. Changeover time between production runs need to be shorter. Therefore

More information

EMC-HD. C 01_2 Subheadline_15pt/7.2mm

EMC-HD. C 01_2 Subheadline_15pt/7.2mm C Electromechanical 01_1 Headline_36pt/14.4mm Cylinder EMC-HD C 01_2 Subheadline_15pt/7.2mm 2 Elektromechanischer Zylinder EMC-HD Short product name Example: EMC 085 HD 1 System = ElectroMechanical Cylinder

More information

150mm Conveyor System

150mm Conveyor System 150mm Conveyor System FlexMove Product Catalogue 231 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM.

More information

Modular plastic belt conveyor WL

Modular plastic belt conveyor WL Modular plastic belt conveyor WL Contents System information...389 Conveyor sections...390 Belts introduction...391 Belts...392 Accessories for use with Friction top belt...392 Conveyor frame components

More information

EXHAUST EXTRACTOR Pure advantage. Exhaust rails for rescue vehicles

EXHAUST EXTRACTOR Pure advantage. Exhaust rails for rescue vehicles Exhaust rails for rescue vehicles MOVEX exhaust fume rails for emergency vehicles are constructed with load-bearing aluminum profiles and integrated guide rail. The exhaust fume rail is equipped with special

More information

TS 3 Conveyor Modules

TS 3 Conveyor Modules BOSCH Modular Transfer Systems TS Conveyor Modules Spare Parts Listing Publication Number: 898006 7/98 8 PALLET TRAVEL 7 9 RIGHT 4 LEFT 6 0 2,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, DANGER BOSCH 7 2 BOSCH 4 6 Automation

More information

Idea bank Transfer cars

Idea bank Transfer cars 3104-1 5392 3104-2 AX100 Transfer car, low built, with side support for the goods. TH 260 mm AX100 Transfer car with roller turntable. Low built AX100 Stopp, mechanical lowered end stop for 7172 5177-4

More information

EXHAUST EXTRACTOR Pure advantage. Exhaust rails for rescue vehicles

EXHAUST EXTRACTOR Pure advantage. Exhaust rails for rescue vehicles Exhaust rails for rescue vehicles FUMEX exhaust fume rails for emergency vehicles are constructed with load-bearing aluminium profiles and integrated guide rail. The exhaust fume rail is equipped with

More information

Hydraulic inch power brake valve LT 31

Hydraulic inch power brake valve LT 31 Hydraulic inch power brake valve LT 31 RE 66227 Edition: 10.2013 Replaces: 06.2006 Series 1X Service brake pressure 60, 80 and 100 bar Inch pressure 25 bar HAD 5793 Features Integrated inch valve Inch

More information

Chain Guides for Roller Chains as per DIN 8187

Chain Guides for Roller Chains as per DIN 8187 Chain Guides for Roller Chains as per DIN 8187 Type T DIN 8187 chain no. Chain dimensions in inches B H b h Article no. 06B-1 3/8 x 7/32 15 10 5,4 1,5 221 010 002 083-1 1/2 x 3/16 15 10 4,5 1,5 221 010

More information

Series SK Straight running plastic chains

Series SK Straight running plastic chains Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines

More information

uni Flex SNB Sideflexing

uni Flex SNB Sideflexing uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has

More information

Function: Used to connect profiles at adjustable angles. Features: 1. Adjustable angles. Item Description For Screw Weight (g) Colour Finish Material

Function: Used to connect profiles at adjustable angles. Features: 1. Adjustable angles. Item Description For Screw Weight (g) Colour Finish Material 4.56 Swivel Fastener (SWF): Function: Used to connect profiles at adjustable angles. 1. Adjustable angles. SWF 1.25.0132.0 8 M6x S3.60 M6 S3.61 M6x S3.60 Item Description For Screw Weight (g) Colour Finish

More information

Accumulation chains from iwis for more efficient conveyor systems 30% MORE EFFICIENT

Accumulation chains from iwis for more efficient conveyor systems 30% MORE EFFICIENT Accumulation chains from iwis for more efficient conveyor systems 30% MORE EFFICIENT Accumulation chains from iwis Version with offset accumulation rollers iwis accumulation chains have idler rollers on

More information

Conveyor system XH Contents System information Chain width 103 mm Technical characteristics Features Examples of application areas

Conveyor system XH Contents System information Chain width 103 mm Technical characteristics Features Examples of application areas Conveyor system Contents System information...215 Chains...216 Chain accessories...217 Beams...217 Beam accessories...218 Slide rails...219 Slide rails, hardened steel...220 Drive and idler units introduction...221

More information

Modular plastic belt conveyor WK

Modular plastic belt conveyor WK Modular plastic belt conveyor Contents System information...405 Belts introduction...406 Belts...407 Conveyor sections...408 Conveyor frame components introduction...409 Conveyor frame components...410

More information

English 1/2015. The Profi le System

English 1/2015. The Profi le System English 1/2015 The Profi le System MayTec System Technology The key to success! Solutions with Innovative Profi le The Profi le System Curved Profi les The Clean-Room System The Telescopic System The Linear

More information

YOUR NATIONAL PARTNER WITH THE COMPLETE PRODUCT PROGRAM FOR EVERY COMPANY

YOUR NATIONAL PARTNER WITH THE COMPLETE PRODUCT PROGRAM FOR EVERY COMPANY MKD BELTING MKD MKD BELTING BELTING Industriezone D Helst 15 9280 Lebbeke Tel. +32(0) 52 41 17 02 Fax. +32(0) 52 41 34 20 BTW 0450.873.519. YOUR NATIONAL PARTNER WITH THE COMPLETE PRODUCT PROGRAM FOR EVERY

More information

At Dyno we make the world of business go round. Up and down. And side to side.

At Dyno we make the world of business go round. Up and down. And side to side. Roller Catalogue 2017 SECTION At Dyno we make the world of business go round. Up and down. And side to side. Our conveyors make moving meat, veges, fruit, packages, gravel, and even luge sleds simple and

More information

Linear Motion Technology Handbook. The Drive & Control Company

Linear Motion Technology Handbook. The Drive & Control Company Linear Motion Technology Handbook The Drive & Control Company 1-2 Bosch Rexroth AG Linear Motion Technology Handbook R310EN 2017 (2006.07) Linear Motion and Assembly Technologies www.boschrexroth.com/brl

More information

pharmaceutical petrochemical industries The new Hygienic range Clean design, easy to clean

pharmaceutical petrochemical industries The new Hygienic range Clean design, easy to clean 7 The new Hygienic range Clean design, easy to clean The Hygienic line is born to help prevent bacterical contamination of products being processed in the production lines where IRINOX enclosures are used,

More information

FL SERIES: 150 mm Conveyor System

FL SERIES: 150 mm Conveyor System : 150 mm Conveyor System Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM. The maximum product width

More information

KMH KMH500/630/800 HORIZONTAL MACHINING CENTERS

KMH KMH500/630/800 HORIZONTAL MACHINING CENTERS KMH KMH5/63/8 HORIZONTAL MACHINING CENTERS Index Cover 1 Cover Contents 2-3 Table of Contents Structure 4-5 Design & Rigidity 6 3 Axis Transmission 7 Ballscrew Cooling System 8-9 ATC Unit Maintenance &

More information

RE / Gerotormotors (Low Speed High Torque Motors) Type GMP, GMR, GMVD. Hydraulik Nord. Contents 1/32. Replaces:

RE / Gerotormotors (Low Speed High Torque Motors) Type GMP, GMR, GMVD. Hydraulik Nord. Contents 1/32. Replaces: Gerotormotors (Low Speed High Torque otors) Type GP, GR, GVD RE 14 7/3.96 RE 14 7/11.96 Replaces: 3.96 Characteristics: Very smooth running, even at low speeds Wide speed range Constant output torque over

More information

TSplus Modular Transfer Systems Lift-Transfer Unit Model EQ2/U

TSplus Modular Transfer Systems Lift-Transfer Unit Model EQ2/U Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics TSplus Modular Transfer Systems Lift-Transfer Unit Model EQ2/U

More information

Washdown & Sanitary Conveyors

Washdown & Sanitary Conveyors Washdown & Sanitary Conveyors Sanitary Dyna-Belt Conveyors Power Belt Series Capacity: Mid Range Effective Belt Width: 3 to 36 OAL 24 to 100 Design Type: Modular, Kitted Construction : Modular Washdown

More information

Stainless steel guide rail brackets

Stainless steel guide rail brackets guide rail brackets Reinforced polyamide PATENT FEATURE Par. # 6,189,685 Par. # 6,543,608 Par. # 6,669,009 (USA) STAINLESS STEEL BRACKETS WITH LIP, EYEBOLT AND KNOB Ø Material: body in stainless steel,

More information

I n n o v a t i o n s

I n n o v a t i o n s Innovations 2017 FRENCH INDUSTRIAL LEADER has brought innovating solutions to the industry. Our approach offers a complete freedom of design thanks to a unique range of flat belt conveyor and modular transfer

More information

ABOUT KJN ALUMINIUM PROFILES

ABOUT KJN ALUMINIUM PROFILES P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all

More information

RE / Connection Elements for Compact Modules. The Drive & Control Company

RE / Connection Elements for Compact Modules. The Drive & Control Company RE 82 618/2003-01 Connection Elements for Compact Modules The Drive & Control Company Connection Elements Connection elements for compact modules allow the fast and easy adaptation to profiles and supports

More information

Features. Engineered for Small Part. Compact Frame & Drives. Small Roller Diameter. Pinch Drive Design (patent pending) Clean Room Certified

Features. Engineered for Small Part. Compact Frame & Drives. Small Roller Diameter. Pinch Drive Design (patent pending) Clean Room Certified Innovative Design Engineered for Small Part Handling / Transfer FDA Approved Belting (low, medium & high friction) Optional 5/16" Nose Bar on one or both ends (Actual Size) Features Compact Frame & Drives

More information

The Separator arrangements depend on the application (see order example or separator options).

The Separator arrangements depend on the application (see order example or separator options). SLE Energy chains individual solutions large dimensions simple handling The order for a steel chain SLE should contain the following data: Type / Radius x Length / Width - Connector Arrangement ; Separator

More information

American Made and American Engineered. Quality Conveyors Since 1948

American Made and American Engineered. Quality Conveyors Since 1948 American Made and American Engineered Quality Conveyors Since 1948 Design and Construction Features ToughTrak Tough and Durable Low Profile Conveyors ToughTrak low profile conveyors are lean and mean working

More information

TURNING DISK STEEL CHAINS:

TURNING DISK STEEL CHAINS: TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29

More information

CABLE DRAG CHAIN SYSTEMS MP 36 G

CABLE DRAG CHAIN SYSTEMS MP 36 G CABLE DRAG CHAIN SYSTEMS MP 36 G murrplastik Systemtechnik GmbH Postfach 1143 D-71567 Oppenweiler Tel. +49 (0) 7191/482-0 Fax +49 (0) 7191/482-280 www.murrplastik.de info@murrplastik.de 259 Order variants

More information

Aluminium. Tensile frame. Alu-snap frames & supports. Leaflet dispenser. Aluminium

Aluminium. Tensile frame. Alu-snap frames & supports. Leaflet dispenser. Aluminium Tensile frame Alu-snap frames & supports Leaflet dispenser 119 TENSILE FRAME TENSILE FRAME NEW! Tensile frame Special lightweight frame made of anodised aluminium rods Ø 9 mm, round plastic corners grey

More information

INSTRUCTION MANUAL MAGNA RAIL

INSTRUCTION MANUAL MAGNA RAIL R ENGLISH NR. 148293 00 INSTRUCTION MANUAL MAGNA RAIL 1999-05-01 List of contents Declaration of conformity, CE Delivery check Mounting instruction (rail, trolley units) Mounting instruction (exhaust pipe,

More information

SURE-SPRING SURE-SPRING, HP VERSION. ROLL-UP COVERS Special products. 18

SURE-SPRING SURE-SPRING, HP VERSION. ROLL-UP COVERS Special products. 18 SURE-SPRING The P.E.I. Patented design known as SURE-SPRING represent the most advanced level of technical innovation in the field of roll-up covers. (Patented) Suitable for HIGH SPEED operation The multiple

More information

The ORIGINAL extruded-aluminum-frame conveyor. American Made and American Engineered

The ORIGINAL extruded-aluminum-frame conveyor. American Made and American Engineered American Made and American Engineered The ORIGINAL extruded-aluminum-frame conveyor The Diebel Series The Diebel Series of Conveyors are designed to offer an economical method of transporting small, lightweight

More information

Profile series I-40. System kit Profile series I-40

Profile series I-40. System kit Profile series I-40 Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000

More information

American Made and American Engineered. Quality Conveyors Since 1948

American Made and American Engineered. Quality Conveyors Since 1948 American Made and American Engineered Quality Conveyors Since 1948 Design and Construction Features ToughTrak Tough and Durable Low Profile Conveyors ToughTrak low profile conveyors are lean and mean working

More information

# Order nr article description quantity 110 MMA machine left side MMA machine right side MMA rotor 1 140

# Order nr article description quantity 110 MMA machine left side MMA machine right side MMA rotor 1 140 # Order nr article description quantity 110 MMA 01 070 110 machine left side 1 120 MMA 01 070 120 machine right side 1 130 MMA 01 070 130 rotor 1 140 MMA 01 070 140 hydraulic system 1 150 MMA 01 070 150

More information

Accessories list. Foam-filled puncture resistant tyres. Foam-filled punctureproof tyre. 1 pcs.

Accessories list. Foam-filled puncture resistant tyres. Foam-filled punctureproof tyre. 1 pcs. Tyres, ramps and Suction pads Nr. 01.01 High Lifter Foam-filled puncture resistant tyres Foam-filled punctureproof tyre. MASSIVe MASSIVe MASSIVe Nr. 010633 Nr. 011201 Nr. 01.02 Wheels With non-marking

More information

RACK JACK. Synchronous Lifting Systems

RACK JACK. Synchronous Lifting Systems RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion

More information

Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches

Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches FEET PA 00.0 076/ 0 - PA, grey - Anti-skid insert NBR - All bolts are suitable for all plates Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors

More information

2 CIRCUIT TRACK. Notes: INSTALLATION PROFILE SURFACE TRACK COLOR. Page 1/9. Date :12/06/17 Rev.02 WHITE POWDER COAT SILVER ANODIZED

2 CIRCUIT TRACK. Notes: INSTALLATION PROFILE SURFACE TRACK COLOR. Page 1/9. Date :12/06/17 Rev.02 WHITE POWDER COAT SILVER ANODIZED 2 CIRCUIT TRACK SURFACE TRACK COLOR INSTALLATION PROFILE WHITE POWDER COAT SILVER ANODIZED PLASTER FLANGE RECESSED VISIBLE FLANGE RECESSED BLACK ANODIZED Page 1/9 SURFACE TRACK SYSTEM : compose your system

More information

2. HG Series Linear Guideway Four-row Super Heavy Load

2. HG Series Linear Guideway Four-row Super Heavy Load 16 2. HG Series Linear Guideway Four-row Super Heavy Load 2-1 Features of the HG Series Linear Guideway 2-2 Construction of HG Series Block Cap End cap End seal (Double seals and scraper) Rail Grease nipple

More information

Technical Data and Dimensions EMC

Technical Data and Dimensions EMC Technical Data Electromechanical Cylinders EMC 5 Technical Data and Dimensions EMC Sizes 3 to 00 follow the standard cylinder series according to ISO 555. Built-in ball screw drives have a diameter of

More information

Actuator Products Rodless Cylinders. GDL Series. Material specifications. Specifications OSP-P. Series. Series P1X. Series P1Z.

Actuator Products Rodless Cylinders. GDL Series. Material specifications. Specifications OSP-P. Series. Series P1X. Series P1Z. Catalog PDN1-3US High Performance : (s FDC12HP-... thru FDC45HP-...) The High Performance series is the basis for s development, which is used in the majority of applications. High Performance guides consist

More information

M-8485Se Printer Standard Unit

M-8485Se Printer Standard Unit M-885Se Printer Standard Unit Spare Parts List Page - P/N 900076 Rev.C SATO Industrial Bar Code Printers Table of Contents M-885Se Spare Parts List Page Frame Assembly...3 Print Head Assembly...9 Ribbon

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum

More information

CMB-SP 5-28 I-C-A-C-B-A

CMB-SP 5-28 I-C-A-C-B-A GRUNDFOS DATA BOOKLET CMB-SP 5-28 I-C-A-C-B-A Grundfos pump 9857579 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbsp/9857579/cmb-sp-5-28-i-c-a-c-b-a.html

More information

R310EN 2211 ( ) The Drive & Control Company

R310EN 2211 ( ) The Drive & Control Company eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball

More information

Precision Modules PSK. The Drive & Control Company

Precision Modules PSK. The Drive & Control Company Precision Modules PSK The Drive & Control Company 2 Bosch Rexroth Coporation Precision Modules PSK R310A 2414 (2008.07) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear

More information

CMB-SP 1-54 I-C-A-C-C-A

CMB-SP 1-54 I-C-A-C-C-A GRUNDFOS DATA BOOKLET CMB-SP 1-54 I-C-A-C-C-A Grundfos pump 98507610 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbsp/98507610/cmb-sp-1-54-i-c-a-c-c-a.html

More information

Model PM 50/20 Intensifier Press. Operation & Maintenance Instructions

Model PM 50/20 Intensifier Press. Operation & Maintenance Instructions Model PM 50/20 Intensifier Press Operation & Maintenance Instructions Revised 07/09/2007 1 1. CHARACTERISTICS Models PM 50/20 Intensifier Press Operation & Maintenance Instructions Approach - Power with

More information

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings

More information

PARALLEL INDEX DRIVES TP Series

PARALLEL INDEX DRIVES TP Series PARALLEL INDEX DRIVES TP Series Calculations J = moment of inertia Application examples Direct driven belt/chain = M B + M B M B = c a n 2π n x t² M R = µ g R m = M B + M R + (M ST )* M ST = m g R M AN

More information

Cable break device. Cable break device. Cable break device 9.1

Cable break device. Cable break device. Cable break device 9.1 9 9 25350 Max. cable Ø Cable break device : Pair : 1.04 kg with plastic cover : Cable break device for residential doors max. 170kgs. Only suitable for Doco tracks. Supplied with orange safety cover. TÜV

More information