Hidro Pnevmo Tehnika RD2.. FLOW CONTROL VALVE ORDERING CODE RD2 10. Page 3.1
|
|
- Jasper Shelton
- 5 years ago
- Views:
Transcription
1 RD2.. Q max Q min. max. L H max. S G L/min L/min bar mm mm mm RD G1/4 RD , M18x1.5 RD2-1, G3/8 ll performances and calibration are carried out by using hydraulic oil with viscosity approx. 46 cst at 50 C. emperature range: - C C Filtration absolute: 25 µm RD2 Flow L/min :,25, age 3.1
2 RD2 -.. N Q max Q min. max. L G L/min L/min bar mm RD2-25N G3/8 0 RD2-N 3 2 G1/2 RD2-25N ll performances and calibration are carried out by using hydraulic oil with viscosity approx. 46 cst at 50 C. emperature range: - C C. Filtration absolute: 25 µm RD2-N RD2-25 N Material body - inox : N Flow L/min :25, age 3.2
3 DJUSLE FLOW- LIMIING VLVE S C S 11 C S 13 C S 15 C Flow rate variation ratio Setting range for S Working pressure range L C G L/min mm bar mm mm mm mm mm 2, ,3 6,3 S 17 C 16 S 19 C S 21 C S 23 C S 25 C S 27 C S 29 C S 31 C S 33 C S 35 C S 37 C 90 1 S 39 C ,5 14, ,5 7 1,2 G3/ , G1/ M ,5 G3/4 M1 ll performances and calibration are carried out by using hydraulic oil with viscosity approx. 46 cst at 50 C emperature range: - C C. Filtration absolute: 25µm F G S mm mm S.... M(M1) G 3/ S.... M(M1) G ½ S.... M(M1) G ¾ 6 36 S 1 1 C G S mm mm S.... F G3/ S.... F G ½ S.... F G ¾ 0 36 :M,M1,F,C hreads code:1,2,3 (see table) Flow rate:1,3,5,7,9 (see table) age 3.3
4 HREE-WY VRF C3/../.. VRF C3/V/.. VRF C3/L/.. H1 F Qmax. [l/min] max. G E F N K H H1 L d t port t port bar mm mm mm mm mm mm mm mm mm mm mm VRF C3/../38 50 G 3/ ,5 VRF C3/../ G ½ VRF C3/../ G ¾ ll performances and calibration are carried out by using hydraulic oil with viscosity approx. 46 cst at 50 emperature range: - C C. Filtration absolute: 25µm C. VRF C3/V/38 ort threads G:38,12,34 Handle design:v,l age 3.4
5 HREE-WY VRF C3C/V/.. C 50 R VRF C3C/V/ R>C C>R VRF C3C/V/12 C R R>C C>R Q [l/min] VRF C3C/V/ R>C C>R max. Q max (L/min) G C E F K R H L d bar t port t port C mm mm mm mm mm mm mm mm mm mm mm VRF C3C/V/38 60 G 3/ ,5 VRF C3C/V/ G ½ VRF C3C/V/ G ¾ ll performances and calibration are carried out by using hydraulic oil with viscosity approx. 46 cst at 50 C emperature range: - C C Filtration absolute: 15 µm VRF C3C/V/38 ort threads G:38,12,34 age 3.5
6 HREE-WY VRF C3/V/VS.. 60 VRF C3/V/VS38 VRF C3/V/VS S VRF C3/V/VS max. Q max (L/min) G C E F N K H L d Z bar t port t port mm mm mm mm mm mm mm mm mm mm mm mm VRF C3/V/VS38 60 G 3/8 VRF C3/V/VS G ½ VRF C3/V/VS , ,5 6, G ¾ , , ll performances and calibration are carried out by using hydraulic oil with viscosity approx. 46 cst at 50 C emperature range: - C C. Filtration absolute: 25µm Valve setting pressure bar over the working pressure. VRF C3/V/VS38 ort threads G:38,12,34 age 3.6
7 NEEDLE VLVE WIH CHECK VLVE DROK6M/ DROK6M/ L max DROK6M/ DROK6M/32 Q nom L/min bar mm DROK6M/32 1 DROK6M/ DROK6M/32 2 max. Lmax ll performances and calibration are carried out by using hydraulic oil with viscosity approx. 46 cst at 50 C emperature range: - C C Filtration absolute: 25 µm DROK6M/32 Connect needle valve at port:,, age 3.7
BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More informationTube Clips Heavy Duty
.187.281.531.625.250.062.032 CCV-0409Z1 2021641.92 100.343.594.625.312.062.032 CCV-0411Z1 2021642 1.28 100.406.656.750.375.062.032 CCV-0413Z1 2021643 1.69 100.250.281.562.625.250.062.032 CCV-0509Z1 2021644
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More informationFlow rates to 3000 l/min
MPH Maximum pressure bar Flow rates to l/min echnical data housing (Materials) Head: luminium: MPH nodised luminium: MPH 68 Painted luminium: MPH 66 Cover: Nylon: MPH luminium: MPH nodised luminium: MPH
More informationSolenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a
More informationHidro Pnevmo Tehnika 3,Vojeli St.,Kazanlak, Bulgaria Tel.: / Fax : +359/
Tehnika 3,Vojeli St.,Kazanlak, Bulgaria Tel.: +359 431/ 62 228 Fax : +359/ 62 019 DIRECTIONL CONTROL VLVES RS04.. /.. BV 99 /... RS06 V.. /.. RHB06-.. /..... RS06 V.. /.. 4/2 RH06/20 RM 06 /.. 4/2 RH06/20.
More informationDirectional Control Valve
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. wide variety of spool options allows
More informationDirect Operated Proportional DC Valves
echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable
More informationMLP400 A P HYDRAULIC INTENSIFIER MAX. OPERATING PRESSURE = 500BAR. 2 l/min. 25 micron (o or better) : Outlet port. : Inlet port SINGLE-ACTING CIRCUIT
ML4 HYDRULIC INTENSIFIER MX. OERTING RESSURE = R : Outlet port : Inlet port G1/4 G1/4 Ø6 Ø38 17 4 Venting SINGLE-CTING CIRCUIT T T DOULE-CTING CIRCUIT The ML hydraulic intensifier converts the low working
More informationGeneral Specifications DRV DRV-Exm DRV-Exd
direct operated, 3-way pressure reducing valve Q max = 8 l/min pressure range = - 5 bar body stainless steel (optional) Description The proportional pressure reducing valve (3-way function) is used to
More informationFiltration Contamination class 10, according to NAS 1638 can be realized with filter ß = 75
ccumulators 19 ccumulator ischarge Valve 3 Specifications Valve Function ccumulator ischarge Mounting Inline not restricted Fluid Mineral-oil or fluid HF / B / C / Viscosity 6... 25 SUS (1... 5 cst) Fluid-temperature
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple
More informationNDR Series Rotor Pack
efore using the product, please check the DR Series Rotor ack Features Low noise chieves a noise level of no greater than 0 d () and there is no need to worry about hydraulic noise even at factories in
More informationElectrohydraulic fan drive for fixed pump systems HICFD
Electrohydraulic fan drive for fixed pump systems HICFD RE 18305-05 Edition: 01.2018 Series 1X Maximum working pressure 250 bar Maximum flow 40 l/min Features Space-saving, efficient fan drive Infinitely
More informationSolenoid Pilot Operated Proportional Directional Control Valve
Solenoid Pilot Operated Proportional Directional Control Valve Features hese solenoid pilot operated proportional directional control valves use a nozzle flapper valve as pilot valve and perform spool
More informationVolume flow measurement
Volume flow measurement Volume flow measurement Turbine flow meter, type SCFT Lower fl ow resistance Built-in measurement connections for pressure and temperature Very simple installation into a hydraulic
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationMASTER PRIORITY & TWO-PUMPS-COMBINING VALVE
TWO-PUMPS-COMBINING SVILUPPO APPLICAZION FRENI INDUSTRIALI TWO-PUMPS-COMBINING -- 00.01 MASTER & TWO-PUMPS-COMBINING FUNCTIONING: Two pumps supply oil to the valve. Steering unit of load sensing type is
More information1. Preface For best results, please refer to this manual before using this product. 2. Safety precautions Model Precautions DFS-1 The maximum pressure
PB97001E-A 2011/06/28 INSTRUCTION MANUAL FOR DIGITAL FLOW SENSOR DFS-*-O/W 1. Preface 2. Safety precautions 3. Installation tips Contents 4. Necessary considerations 5. Description of Model-No. 6. Wiring
More informationMB-4 Chapters Monoblock Directional Control Valves
M-4 hapters Working condition.5 Ordering code.6 Dimensions.9 erformance data.0 Inlet relief options. Spool options.2 side options.20 side spool positioners.23 Other options.3 Outlet options.34 M-4 2 2
More informationMPH Maximum pressure 10 bar F l o w r a t e s t o l / m i n
MPH Maximum pressure bar F l o w r a t e s t o l / m i n 6 echnical data housing (Materials) Head: luminium: MPH ---- nodised luminium: MPH 6-8 Painted luminium: MPH 66 Cover: Nylon: MPH --- luminium:
More informationMATERIALS CARTRIDGES PRESSURES VALUES TESTS CARRIED OUT ON FILTER ELEMENTS
1 OIL FILTER DESCRIPTION Many years of in-field experience have shown the necessity of more and more efficient controls on the contamination level of hydraulic fluids and fuels. With this goal uppermost
More informationType : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil
ype : V20 Nominal Flow : 80 LM Maximum Flow : 135 LM (36 GM) Max. ressure : 350 ar (5000 psi) Medium : Mineral Oil Introduction: VELJN V20M Mobile directional control valve is a segment type design that
More informationMB-2 Chapters Monoblock Directional Control Valves
M-2 hapters Working condition.5 Ordering code.6 Dimensions.8 erformance data.9 Inlet relief options.1 Spool options.11 side options.14 side spool positioners.16 Inlet options.2 1 For Mobile nd Industrial
More informationMPH Maximum pressure 10 bar F l o w r a t e s t o l / m i n
MPH Maximum pressure bar F l o w r a t e s t o l / m i n 6 echnical data Filter housing (Materials) Head: luminium: MPH ---- nodised luminium: MPH 6-8 Painted luminium: MPH 66 Cover: Nylon: MPH --- luminium:
More informationType C2 Seat Type Solenoid Pilot Valve
Type C Seat Type Solenoid Pilot Valve JIS graphic symbols for hydraulic system T eatures No hydraulic locking occurs even during long periods of pressurized operation Nomenclature 1 3 5 - - - - - 1 3 5
More informationSDH Series. Monoblock and Sectional directional valves
SDH Series Monoblock and Sectional directional valves Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information
More information45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
More informationDirectional Control Valve Series D1VW
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. A wide variety of spool options
More informationPRESSURE SWITCH 1PS / 1PF / 1PT
RESSURE SWICH 1S / 1F / 1 Ref. No. 98 Release 7/2 1 Non adjustable differential type. Spring loaded sealed piston construction. Encapsulated design for protection against dust. Six pressure ranges available,
More informationVALVES INTRODUCTION. DIRECTIONAL CONTROL VALVES SELECTION GUIDE 2 or 3 way for single-acting cylinders or tools. FULL SYSTEM CONTROL
INRODUCION VLVES FULL SYSEM CONROL Hydraulic valves are devices that control different aspects of your hydraulic system's operation. he most common types of valves are directional control valves, flow
More informationD03, D05 & D08 SERIES
INDUSRIL FLUID OWER COMONENS ND SYSEMS D03, D05 & D08 SERIES D03-DC1-70 D05-SQ1--1K D08-R1--3K 31341 Friendship Drive, Magnolia, X 77355 el.: 281-259-7768 Fax: 281-259-7249 www.hyvair.com Features 1. Rugged
More informationProportional Pressure Reducing Valve Series D1FV
Characteristics roportional ressure Reducing Valve Series D1FV he proportional pressure reducing valves series D1FV are available with and without onboard electronics (OE). D1FV OE he digital onboard electronics
More information15 Flow Meter SCQ. Measurement principle: spring/piston system
15 Flow Meter SCQ Measurement principle: spring/piston system Flow measurement with direction indication Response time < 2 ms Compact design Withstands pressures up to 420 bar Wide range of viscosity p/t/q
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive
More informationDifferential Lock Valve
Differential Lock Valve Series M..DVV (for 4 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion
More informationVHS... Screw Flow Meter
Member of the Group VHS... Screw Flow Meter The normal transmitter with block plug already has a push pull output to serve all NPN or PNP Inputs. It supplies a square wave signal. Those transducers are
More informationDirectional Control Valve HDS34
Directional Control Valve Load Sensing Reference: 2 991227 E Issue: 7.9 1/54 Contents age 1 General information................................................................ 4 1.1 Introductions..................................................................
More informationFlow rates to 500 l/min
FF 5 Filter housing in according to SE J066 for F filter elements Maximum pressure 50 bar Flow rates to 500 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing:
More informationDifferential Lock Valve
Differential Lock Valve Series M..DVV (for 4 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion
More informationEMechanically Operated Directional Valves
E DIRECIONL CONROLS Cam Operated Directional Valves hese valves may be used to shift the direction of oil flow by depressing the spool by way of a cam. Specifications Max. Operating Max. -Line Max. Flow
More informationIFP MRV03 RELIEF VALVE MODULE
IF MRV03 RELIEF VLVE MODULE ISO4401-03 SIZE/NF D03 DJUSLE SNDRD MICROMEER KNO EXREMELY CISE CONROL WO SGE LNCE ISON FOUR RNGES VILLE LOW OVERRIDE MRV-03- MRV-03-W MRV-03- MRV-03- RELIEF MODULR VLVE SIZE
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationS.A. 193 Stefan Cel Mare str., 2400 Sibiu -Romania
S.A. H rd 193 Stefan Cel Mare str., 2400 Sibiu -Romania 1 240 l/min 315 bar Pressure control valves NG10,20,32 FC -9 GENERALITIES Pilot operated pressure control valves, available with/without by-pass
More informationPubl. 3-EN 2950-A. DENISON HYDRAULICS Pressure Relief Valve R6V
Publ. 3-EN 2950-A DENISON HYDRAULICS Pressure Relief Valve R6V FEATURES, SYMBOL FEATURES High Performance: R6V valves are designed for a maximum pressure of 350 bar and a flow capacity up to 650 l/min.
More informationModular valves DO5 (NG 10) 315 bar
Modular valves DO5 (N ) 315 bar 2 Modular valves DO5 (N ) 315 bar OSCH OSCH Modular valves DO5 (N ) 315 bar 3 roduct Range ressure relief valves age ressure reducing valves age 4 4 4 Check valves 4 16
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H03 5 gpm (19 L/min) nominal 10 000 psi (700 bar) H03 valves are rated for 5 gpm (19 L/min) nominal flow at pressures
More informationDirectional Control Valve Series D3W (Parker), 4D02 (Denison)
Characteristics Series D3W (Parker), 4D0 (Denison) The direct operated directional control valve size NG10 is available with both Parker (series D3W) and Denison (series 4D0) model codes. Both series are
More informationMLP400 A P /2015 HYDRAULIC INTENSIFIER. 2 l/min. 25 micron (o or better) : Outlet port. : Inlet port SINGLE-ACTING CIRCUIT
ML4 HYDRULIC INTENSIFIER : Outlet port : Inlet port G1/4 G1/4 Ø6 Ø38 17 4 Venting SINGLE-CTING CIRCUIT T T DOULE-CTING CIRCUIT The ML hydraulic intensifier converts the low working pressure of the hydraulic
More informationp max (see table of performances) Q max (see table of performances) MD1K MD1KD bar
41 510/107 ED EXLOSION-ROOF VERSION SOLENOID OERED DIRECIONL CONROL VLVES in compliance with EX 94/9/CE SERIES 21 MD1K-MD1KD ISO 4401-03 (CEO 03) E44K-E44KD CEO 05 E074K-E074KD ISO 4401-07 (CEO 07) E54K-
More informationD07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
More informationOil/Air Cooler Units. Standard series EL Type. Test procedure certified following EN 1048
COMPLETE OIL / AIR COOLER SYSTEM WITH AXIAL FAN FOR INDUSTRIAL APPLICATIONS. Application These high performance coolers with axial fans are suitable for hydraulic cooling applications with both return
More informationp max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More information油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189
ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationFlow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control
Flow Control Valve Series SRC.. plug-in coil for easy coil change flow rates are unaffected by changes in temperature or load. compact reduced p ZnNi coating (>70h DIN EN ISO 97 NSS) Description. General
More informationPilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
More informationTruck Hydraulics. Serie VP1 Variable Displacement Pumps
ruck Hydraulics Variable Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Pump and line
More informationunrestricted; preferably with coil at bottom (auto. air bleed) 12 or 24 Volt DC from an electronic controller Deutsch plug - IP67
3 Technical data General characteristics Design Flow direction Seals De-energized position Mounting attitude Description, value, unit line mounting P A controlled P R surplus flow discharge (models shown
More informationDIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures
HYD RULI DIREIONL O NROL VLVES VES omponents For he ontrol Of Wide Range Of Operating Flows nd ressures V, DV, ND RORY DIREIONL ONROL VLVES; FOR FLOWS U O 20 GM (76 LM) ND WORKING RESSURES U O 2,500 SIG
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :
More informationDFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
More informationHydraulic Pump Series F1 Fixed Displacement
Fixed Displacement Catalog 9129 8201-02 August, 1997 GB Content General information 3 Specifications 4 Pump and line selection 5 Ordering code 5 Standard versions 5 Installation dimensions 6 Installation
More informationA complete line of pressure differential visual and electrical indicators are available with this series of filters.
D e s c r i p t i o n FHB series filters are designed for pressure line applications where manifold mounting is a specific requirement. The manifold type filters are designed to integrate onto manifold
More informationP.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
More informationFHF325 series. Filter housing according to SAE J2066 for HF4 filter elements. High Pressure fi lters
High Pressure fi lters FHF5 series Maximum pressure up to 50 bar Flow rate up to 500 l/min housing according to SAE J066 for HF filter s 95 High Pressure fi lters FILTER SIZING The correct filter sizing
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationHydraulic Pump Series F1plus Fixed Displacement
Fixed Displacement Catalog 9129 8218-02 February 1999, GB Content General information, design 3 Specifications 4 Pump cross section 4 Pump and line selection 5 Ordering code 6 Standard versions 6 Installation
More informationCheck Valves. VC Series - Cartridge Mounting 500 Bar. Innovative Fluid Power. Bulletin 86624
VC Series - Cartridge Mounting 500 ar Innovative Fluid Power ulletin 86624 Issue 1.0 02.2010 VCC 500 ar General Information Check Valve with Standard Top Cap Section View with Standard Poppet Maximum Working
More informationAxial Piston Variable Pump A18VLO
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics ervice Axial Piston Variable Pump A18VLO RE 92280/06.09 1/12 Replaces: 02.09 Data sheet eries 10 ize NG80 Nominal
More informationD4D SOLENOID OPERATED DIRECTIONAL CONTROL VALVES DIRECT CURRENT - SERIES 50 ALTERNATING CURRENT - SERIES 60
41 300/198 ED D4D SOLENOID OPERATED DIRECTIONAL CONTROL VALVES DIRECT CURRENT - SERIES 0 ALTERNATING CURRENT - SERIES 60 CETOP 0 p max 30 bar Q max 100 l/min MOUNTING INTERFACE DIRECT-ACTING SOLENOID OPERATED
More informationEV FT3 ES-FT5 ES/GB :09 Pagina 4 FT3 ES* 4
EV FT3 ES-FT5 ES/GB 4 15-07-2008 16:09 Pagina 4 5 1 HOW TO READ THE MODEL CODE FOR VALVES FT3 - ES - * FT3 - ES - (1) (C) - * - (024C) / 10 2 FUNCTIONAL SYMBOLS 1C 1N 1 2 3 4 5 6 7 1 FT3 4-way directional
More informationDSH* /117 ED LEVER OPERATED DIRECTIONAL CONTROL VALVE MOUNTING SURFACES DSH3 ISO DSH5 ISO
41 600/117 ED DSH* LEVER OPERATED DIRECTIONAL CONTROL VALVE MOUNTING SURFACES DSH3 ISO 4401-03 DSH5 ISO 4401-05 p max (see performances table) Q nom (see performances table) OPERATING PRINCIPLE The DSH
More informationHydro M t HYDRAULIC VALVES SN-4.
Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control
More information525 Stainless steel high pressure filters. FZP series. Maximum pressure up to 420 bar. Stainless steel high pressure fi lters
Stainless steel high pressure fi lters FZP series Maximum pressure up to 0 bar 55 Stainless steel high pressure filters FILTER SIZING The correct filter sizing have to be based on the variable pressure
More informationCoolant (oil-based, water-soluble) Weak alkali-based cleaning fluid Cutting fluid Industrial water. Variations. Number of elements
Bag Filter Series Optimum for the large flow filtration Easy maintenance Main operating fluids For other kinds of fluids, please contact SMC. With safety mechanism Employs proprietary SMC latch mechanism
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control
More informationSPECIFICATIONS AND OUTLINE DIMENSIONS
/7 May 05 JAS Dynaset HPW pump gives great waterpower with the best power to weight ratio in the World. Small size, lightweight, outstanding durable construction with ingenious piston-to-piston action
More informationCoolant (oil-based, water-soluble) Weak alkali-based cleaning fluid Cutting fluid Industrial water. Variations. Number of elements
Bag Filter Series Optimum for the large flow filtration Easy maintenance Main operating fluids For other kinds of fluids, please contact SMC. With safety mechanism Employs proprietary SMC latch mechanism
More informationDirectional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
More informationSpin-on Filters. Maxiflow Series. MAX 360 I/min - 10 bar. Low pressure filters
Spin-on ilters MX 36 I/min - 1 bar 61 Spin-on ilters eatures & Benefits eatures Integrated indicator igh quality paint for canisters Spin-on filters available for suction and return line filtration igh
More informationaccessories SYSTEM ACCESSORIES
SYSEM ACCESSORIES 66 SYSEM ACCESSORIES Introduction M1 - ort Control Manifold GA1 Gauge Adapters F3 3 Nipples G5-2.5 10,000 psi/ 700 bar Gauges ower ump HCA20 Hoses C213 Couplers ump with 4 ort Manifold
More informationRA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.
R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to
More informationOpen center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
More informationProportional Throttle Valves Series TDL
Catalogue HY11-200/UK Characteristics Function Proportional throttle valves are designed to include three stages. The main valve poppet is controlled by a hydraulic follower. The position of the hydraulic
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) NF D10, ISO-4401-10,
More informationInstallation and Startup Manual Hydraulic Pumps Series VP1-095 /-110/ -130
Visit our homepage for additional support parker.com/pmde Installation and Startup Manual Hydraulic Pumps Series VP1-095 /-110/ -130 Effective: May 01, 2015 Supersedes: January 01, 2013 Important installation
More informationSymbol RH F... GENERAL DESCRIPTION. 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction
GENERAL DESCRIPTION List: RH06-1F-1-July 016 4/3- and 4/- way directional control valves with solenoid operation, heavy duty construction Removable AC and DC voltage coils-quick replacement and rotation
More informationLMP series. 305 Low & Medium Pressure filters MULTIPORT. Maximum pressure up to 80 bar - Flow rate up to 200 l/min
Low & Medium Pressure fi lters LMP - series Maximum pressure up to 8 bar - Flow rate up to l/min 5 Low & Medium Pressure filters FILTER SIZING The correct filter sizing have to be based on the variable
More information4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
More informationDIN Filter element according to DIN Low & Medium Pressure filters. Maximum pressure up to 60 bar - Flow rate up to 330 l/min
Low & Medium Pressure filters & series Maximum pressure up to 60 bar Flow rate up to 0 l/min DIN 550 09 Low & Medium Pressure filters FILTER SIZING The correct filter sizing have to be based on the variable
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
More informationHydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
More informationFILLING AND CHECK VALVE
Filling valves characteristics Size Max. Flow (l/min.) R-114 DN-32 160 Max. Press. Opening ratio 3.6:1 Decompr. ratio Min pilot pressure Max pilot pressure Min. suction opening pressure Pilot volume (cm
More informationGear Pumps - AP05. Reference: 200-P EN-05 1/26. Issue:
Gear Pumps - Reference: 200-P-991218-EN-05 Issue: 09.2015 1/26 Contents Page 1 General information... 3 1.1 Introduction to the product... 3 1.2 Non-standard symbols used in the text... 4 2 Technical information...
More informationHigh Pressure fi lters. FHP series. Maximum pressure up to 420 bar - Flow rate up to 750 l/min. High Pressure fi lters
igh Pressure fi lters FP series Maximum pressure up to bar Flow rate up to 7 l/min igh Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending
More informationD4E DIRECT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 41
83 250/198 ED D4E DIRECT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP 05 p max 250 bar Q max (see performance ratings table) MOUNTING INTERFACE OPERATING
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief
More information