Tungsten carbide burrs with TOUGH and TOUGH-S cuts The stock removal experts for tough applications
|
|
- Virgil Goodwin
- 5 years ago
- Views:
Transcription
1 Tungsten cabide bus with and -S cuts The stock emoval expets fo tough applications Especially fo foundies, dockyads and steel constuctions TRUST BLUE Innovative, vey obust high-pefomance cuts poviding exceptional impact esistance Minimized damages such as tooth chipping/beakage and splinteing Also useable in the low otational speed ange
2 TC bus with and -S cuts fo tough applications The and -S cuts have been specially designed fo tough opeating conditions in dockyads, foundies and steel constuction. They ae also ideal fo use in all manufactuing sectos whee, due to the difficult poduction envionment, tooth beakages o othe damage to conventional bus is a fequent occuence. cut Advantages: Innovative, special cuts poviding exceptional impact esistance. Minimized tooth chipping/beakage, splinteing and bu failues due to vey obust, high-pefomance cuts. Can also be used at low otational speeds. Due to thei exteme impact esistance, they can pefectly be used as long-shank vaiants. Applications: High-impact applications when using shank extensions Applications with a high angle of suface contact Milling of naow contous Applications whee high otational speeds ae not available Mateials that can be woked: Cast ion Steel Cast steel The and -S cuts can be used on mateials up to 54 HRC. Fo hade mateials, it is ecommended to pefom tials befoehand. Recommendations fo use: Fo the cost-effective use of bus, wok with highe otational/cutting speeds. Powe ecommendation fo tool dives: --Shank diamete of 3 mm: 75 to 300 watts --Shank diamete of 6 mm: fom 300 watts Please obseve the otational speed ecommendations. Matching tool dives: Flexible shaft dive Staight ginde Tungsten cabide bus with the cut ae paticulaly aggessive and ae chaacteized by high stock emoval. -S cut Tungsten cabide bus with the -S cut ae chaacteized by smooth milling and high stock emoval. Recommended otational speed ange [RPM] To detemine the ecommended cutting speed ange [m/min], please poceed as follows: ➊ Select the mateial goup to be machined. ➋ Select the cut. ➌ Establish the cutting speed ange. To detemine the ecommended otational speed ange [RPM], please poceed as follows: ➍ Select the equied bu diamete. ➎ The cutting speed ange and the bu diamete detemine the ecommended otational speed ange. Safety note: Please obseve the educed otational speeds fo bus with a long shank! ➊ Mateial goup Application ➋ ➌ ting speed Steel, cast steel Cast ion Steels up to 1,200 N/mm² (< 38 HRC) Hadened, heat-teated steels ove 1,200 N/mm² (> 38 HRC) Gey cast ion, white cast ion Constuction steels, cabon steels, tool steels, non-alloyed steels, casehadened steels, cast steel, alloyed steels Tool steels, tempeing steels, alloyed steels, cast steel Cast ion with flake gaphite EN-GJL (GG), with nodula gaphite/ nodula cast ion EN-GJS (GGG), white annealed cast ion EN-GJMW (GTW), black cast ion EN-GJMB (GTS) Coase stock emoval with impact load Coase stock emoval with impact load -S -S -S m/min m/min m/min Example: TC bu, cut, bu dia. of 12 mm. Coase stock emoval with impact load on steels up to 1,200 N/mm². ting speed: m/min Rotational speed ange: 7,000 16,000 RPM ➍ Bu dia. ➎ ting speeds [m/min] Rotational speeds [RPM] 8 10,000 14,000 24, ,000 11,000 19, ,000 9,000 16, ,000 7,000 12,000 2
3 TC bus with and -S cuts fo tough applications Cylindical shape ZYA without end cut Cylindical bu accoding to DIN Odeing notes: Please complete the desciption with the desied cut. -S ZYA 0820/ ZYA 1020/ ZYA 1225/6... Cylindical shape ZYAS with end cut Cylindical bu accoding to DIN 8032 with cicumfeential and end cut ZYAS 0820/ ZYAS 1020/ ZYAS 1225/ ZYAS 1225/8 3
4 TC bus with and -S cuts fo tough applications Ball shape KUD Ball-shaped bu accoding to DIN KUD 0807/ KUD 1210/6 Cylindical shape with adius end WRC Cylindical bu with adius end accoding to DIN Combination of cylindical and ballshaped geometies. SL = shank length (long steel shank) Odeing notes: Please complete the desciption with the desied cut. Safety notes: Please obseve the educed otational speeds fo long-shank bus. -S WRC 0820/ WRC 1020/ WRC 1225/6... Long shank dia. of 6 mm, SL 150 mm WRC 1225/6... SL WRC 1225/8... 4
5 TC bus with and -S cuts fo tough applications Flame shape B Flame-shaped bu accoding to ISO 7755/ B 0820/ B 1230/ B 1230/8 Pointed tee shape SPG Pointed tee-shaped bu accoding to DIN 8032, flattened tip. SL = shank length (long steel shank) Odeing notes: Please complete the desciption with the desied cut. Safety notes: Please obseve the educed otational speeds fo long-shank bus. -S SPG 1020/ SPG 1225/6... Long shank dia. of 6 mm, SL 150 mm SPG 1225/6... SL SPG 1225/8... 5
6 TC bus with and -S cuts fo tough applications α Conical shape with adius end KEL Conical bu with adius end accoding to DIN SL = shank length (long steel shank) Safety notes: Please obseve the educed otational speeds fo long-shank bus. a KEL 1225/6 Long shank dia. of 6 mm, SL 150 mm KEL 1225/6 SL KEL 1225/8 Tee shape with adius end RBF Tee-shaped bu with adius end accoding to DIN SL = shank length (long steel shank) Odeing notes: Please complete the desciption with the desied cut. Safety notes: Please obseve the educed otational speeds fo long-shank bus. -S RBF 0820/ RBF 1020/ RBF 1225/ RBF 1625/6... Long shank dia. of 6 mm, SL 150 mm RBF 1225/6... SL RBF 1225/8... 6
7 TC bus with and -S cuts fo tough applications Oval shape TRE Oval bu accoding to DIN TRE 1016/ TRE 1220/6 Set 1712 Set 1712 contains five tungsten cabide bus fo tough applications in the most common shapes and dimensions. The study plastic box potects the tools fom dit and damage. The bus ae secued at the shanks, facilitating the selection and withdawal of the tools. Five futhe unused slots ae available fo othe bus. Contents: 5 tungsten cabide bus, shank diamete of 6 mm, cut 1 piece each: WRC 1225/6 SPG 1225/6 RBF 1225/6 KEL 1225/6 TRE 1220/
8 ARGENTINA AUSTRALIA BELGIË BOSNA I HERCEGOVINA BRASIL БЪЛГАРИЯ CHILE TA RICA DANMARK DEUTSCHLAND REPÚBLICA DOMINICANA ECUADOR EL SALVADOR EE OMI FRANCE ΕΛΛΆΔΑ UNITED KINGDOM GUATEMALA भ रत INDONESIA ÉIRE Í D ITALIA CANADA ҚАЗАҚСТАН COLOMBIA KOSOVA HRVATSKA CUB ATVIJA LIETUVA MALAYSIA MÉXICO NEW ZEALAND NICARAGUA NEDERLAND NORGE ER REICH PANAMÁ PERÚ PILIPINAS POLSKA PORTUGAL ROMÂNIA РОССИЯ SVERI SCHWEIZ СРБИЈА SINGAPORE SLOVENSKO SLOVENIJA ESPAÑA SUID AF ราชอาณาจ กรไทย ČESKÁ REPUBLIKA TÜRKIYE УКРАЇНА MAGYARORSZÁG URUG UNITED STATES OF AMERICA VENEZUELA ARGENTINA AUSTRALIA UE BOSNA I HERCEGOVINA BRASIL БЪЛГАРИЯ CHILE COSTA RICA DANMARK DEUTSCHLA BLICA DOMINICANA ECUADOR EL SALVADOR EESTI SUOMI FRANCE ΕΛΛΆΔΑ UNITED KI GUATEMALA भ रत INDONESIA ÉIRE ÍSLAND ITALIA CANADA ҚАЗАҚС MBIA KOSOVA HRVATSKA CUBA LATVIJA LIETUVA MALAYSIA MÉXICO NEW ND NICARAGUA NEDERLAND NORGE ÖSTERREICH PANAMÁ PERÚ PILIPINAS POLS GAL ROMÂNIA РОССИЯ SVERIGE SUISSE СРБИЈА SINGAPORE SLO LOVENIJA ESPAÑA SUID AFRIKA ราชอาณาจ กรไทย ČESKÁ REPUBLIKA TÜRK НА MAGYARORSZÁG URUGUAY UNITED STATES OF AMERICA VENEZ TINA AUSTRALIA BELGIË BOSNA I HERCEGOVINA BRASIL БЪЛГАРИЯ CHILE COSTA ARK DEUTSCHLAND REPÚBLICA DOMINICANA ECUADOR EL SALVADOR EESTI SUOMI FR ΔΑ UNITED KINGDOM GUATEMALA भ रत INDONESIA ÉIRE ÍSLAND ITALIA ADA ҚАЗАҚСТАН COLOMBIA KOSOVA HRVATSKA CUBA LATVIJA LIETUVA SIA MÉXICO NEW ZEALAND NICARAGUA NEDERLAND NORGE ÖSTERREICH PANAMÁ PILIPINAS POLSKA PORTUGAL ROMÂNIA РОССИЯ SVERIGE SVIZZ ИЈА SINGAPORE SLOVENSKO SLOVENIJA ESPAÑA SUID AFRIKA ราชอาณาจ ČESKÁ REPUBLIKA TÜRKIYE УКРАЇНА MAGYARORSZÁG URUGUAY U STATES OF AMERICA VENEZUELA ARGENTINA AUSTRALIA BELGIQUE BOSNA I HE VINA BRASIL БЪЛГАРИЯ CHILE COSTA RICA DANMARK DEUTSCHLAND REPÚBLICA DOM ECUADOR EL SALVADOR EESTI SUOMI FRANCE ΕΛΛΆΔΑ UNITED KINGDOM GUATEMAL रत INDONESIA ÉIRE ÍSLAND ITALIA CANADA ҚАЗАҚСТАН COLOMBIA SOVA HRVATSKA CUBA LATVIJA LIETUVA MALAYSIA MÉXICO NEW ZEALAND NICARA RLAND NORGE ÖSTERREICH PANAMÁ PERÚ PILIPINAS POLSKA PORTUGAL ROMÂ ИЯ SVERIGE SCHWEIZ СРБИЈА SINGAPORE SLOVENSKO SLOVENIJA A SUID AFRIKA ราชอาณาจ กรไทย ČESKÁ REPUBLIKA TÜRKIYE УКРАЇНА M RSZÁG URUGUAY UNITED STATES OF AMERICA VENEZUELA ARGEN RALIA BELGIË BOSNA I HERCEGOVINA BRASIL БЪЛГАРИЯ CHILE COSTA RICA DANM SCHLAND REPÚBLICA DOMINICANA ECUADOR EL SALVADOR EESTI SUOMI FRANCE ΕΛΛ ED KINGDOM GUATEMALA भ रत INDONESIA ÉIRE ÍSLAND ITALIA CA АЗАҚСТАН COLOMBIA KOSOVA HRVATSKA CUBA LATVIJA LIETUVA MALAY ICO NEW ZEALAND NICARAGUA NEDERLAND NORGE ÖSTERREICH PANAMÁ PERÚ NAS POLSKA PORTUGAL ROMÂNIA РОССИЯ SVERIGE SUISSE СРБИ APORE SLOVENSKO SLOVENIJA ESPAÑA SUID AFRIKA ราชอาณาจ กรไทย ČE UBLIKA TÜRKIYE УКРАЇНА MAGYARORSZÁG URUGUAY UNITED STA ERICA VENEZUELA ARGENTINA AUSTRALIA BELGIQUE BOSNA I HERCEGOVINA BR ГАРИЯ CHILE COSTA RICA DANMARK DEUTSCHLAND REPÚBLICA DOMINICANA ECUADOR ADOR EESTI SUOMI FRANCE ΕΛΛΆΔΑ UNITED KINGDOM GUATEMALA भ रत INDON ÉIRE ÍSLAND ITALIA CANADA ҚАЗАҚСТАН COLOMBIA KOSOVA HRVA BA LATVIJA LIETUVA MALAYSIA MÉXICO NEW ZEALAND NICARAGUA NEDERLAND N STERREICH PANAMÁ PERÚ PILIPINAS POLSKA PORTUGAL ROMÂNIA РОССИЯ SVE SVIZZERA СРБИЈА SINGAPORE SLOVENSKO SLOVENIJA ESPAÑA SUID AF ราชอาณาจ กรไทย ČESKÁ REPUBLIKA TÜRKIYE УКРАЇНА MAGYARORSZÁG URUG UNITED STATES OF AMERICA VENEZUELA ARGENTINA AUSTRALIA B I HERCEGOVINA BRASIL БЪЛГАРИЯ CHILE COSTA RICA DANMARK DEUTSCHLAND REPÚ INICANA ECUADOR EL SALVADOR EESTI SUOMI FRANCE ΕΛΛΆΔΑ UNITED KINGDOM GU भ रत INDONESIA ÉIRE ÍSLAND ITALIA CANADA ҚАЗАҚСТАН COLOM KOSOVA HRVATSKA CUBA LATVIJA LIETUVA MALAYSIA MÉXICO NEW ZEALAND GUA NEDERLAND NORGE ÖSTERREICH PANAMÁ PERÚ PILIPINAS POLSKA PORTU NIA РОССИЯ SVERIGE SCHWEIZ СРБИЈА SINGAPORE SLOVENSKO ESPAÑA SUID AFRIKA ราชอาณาจ กรไทย ČESKÁ REPUBLIKA TÜRKIYE УКР ARORSZÁG URUGUAY info@pfed.com UNITED STATES OF AMERICA VENEZUELA AR PFERD quality cetified accoding to ISO AUSTRALIA BELGIQUE BOSNA I HERCEGOVINA BRASIL БЪЛГАРИЯ CHILE COSTA R Pinted in Gemany. Subject to technical modifications. 07/
Tungsten carbide burrs with CAST cut High-capacity burrs for cast iron
Tungsten cabide bus with cut High-capacity bus fo cast ion Up to 100 % highe stock emoval pefomance in compaison to conventional coss cut bus Significantly inceased aggessiveness, lage chips and vey good
More informationTungsten carbide burrs with STEEL cut High-capacity burrs for steel and cast steel
Tungsten cabide bus with cut High-capacity bus fo steel and cast steel Up to 50 % highe stock emoval pefomance when used on steel and cast steel in compaison to conventional coss cut bus Significantly
More informationTungsten carbide burrs with ALU cut High-capacity burrs for aluminium
Tungsten cabide bus with cut High-capacity bus fo aluminium Vey boad and compehensive ange, including miniatue bus fo delicate applications Extemely high stock emoval pefomance, long tool life and smooth
More informationUp to 100 % higher stock removal performance when used on stainless steel (INOX) in comparison to conventional cross cut burrs
Tungsten cabide bus with cut High-capacity bus fo use on stainless steel () INNOVATION cut Up to 100 % highe stock emoval pefomance when used on stainless steel () in compaison to conventional coss cut
More informationSheep and goat numbers (preceding December)
4.17.0.1 Sheep and goat numbers (preceding December) 1 000 head % of EU-27 % TAV 2007 2008 2009 2010 2010 2010 2009 1 2 3 4 5 6 7 Sheep EU-27 95 803 90 907 88 757 84 614 100.0 4.7 Belgique/België ( 1 )
More informationSUGAR. EU-28 sugar beet area reached 1.5 million ha in 2013/2014, almost in line with the 2012/2013 marketing year [Table ].
SUGAR EU-28 sugar beet area reached 1.5 million ha in 2013/2014, almost in line with the 2012/2013 marketing year [Table 4.3.1.1]. According to the International Sugar Organization (ISO), global sugar
More informationProtected designations of origin and protected geographical indications R. (UE) 1151/ /12/2013. Ranking. Totals
4.24.9.1 Protected designations of origin and protected geographical indications R. (UE) 1151/2012 31/12/2013 Totals Ranking PDO 1 PGI 2 PDO+PGI AOP+IGP 1 2 3 4 Belgique/België 3 5 8 IT Italia 252 Bulgaria
More informationArea Yield Production ha % TAV 100 kg/ha % TAV t % TAV
4.1.1.1 Area, yield and production of common and durum wheat 26/11/2013 Common wheat Area Yield Production 1 000 ha % TAV 100 kg/ha % TAV 1 000 t % TAV 2009 2010 2011 2012 2012 2009 2010 2011 2012 2012
More informationEU
4.4.1.1 Area, yield and production of : rapeseed, sunflower seed and soya beans 23/11/2012 Area Yield Production 1 000 ha % TAV 100 kg/ha % TAV 1000 t % TAV 2008 2009 2010 2011 2011 2008 2009 2010 2011
More informationsquareworx For every eventuality: Square shoulder, slotting and chamfering milling with only one insert
squaewox Fo evey eventuality: Squae shoulde, slotting and chamfeing milling with only one inset squaewox M squae shoulde, slotting and chamfeing milling cutte bodies milling cutte bodies One fo two: Squae
More informationBelgique/ Bulgaria Česká Danmark Deutschland Eesti Éire/Ireland Elláda España France Italia Kýpros Latvija Lietuva Luxembourg Magyarország
1.0.1 Exchange rates 28.02.2011 (1 ECU-EUR =... MN ) Since Belgique/ Bulgaria Česká Danmark Deutschland Eesti Éire/Ireland Elláda España France Italia Kýpros Latvija Lietuva Luxembourg Magyarország België
More informationGDP/habitants (PPS) In comparisonwith EU 27
2..1.1 Basic data: key general statistics 21 23/1/212 Total Population GDP/ Unemployment Total Trade area (1 inhabitants) inhabitants Inflation ( 1 ) rate (% of civilian working balance (km²) PPS ( 2 )
More informationCERAMIC INSERTS For Turning, Grooving and Milling
SPK Cutting Tools VEHICLES AEROSPACE GEARS & BEARINGS ENGINEERING WIND ENERGY DISCOVER A MULTITUDE OF SOLUTIONS CERAMIC INSERTS Fo Tuning, Gooving and Milling DISCOVER A MULTITUDE OF SOLUTIONS AEROSPACE
More informationBurrs Table of contents
s s s Tble of contents Genel infomtion Contents Pge Genel infomtion 3 The fst wy to the best tool 4 Dive Contents Pge HSS oty cuttes (HSS = high speed steel) HSS oty cuttes 62 Cut ALU Cut 1 Cut 2 Cut 3
More informationFull complement cylindrical roller bearings
Full complement cylindical olle beaings INTERPRECISE Donath GmbH Osting 2 90587 Obemichelbach Gemany Phone +49-911-76630-0 Fax +49-911-76630-30 info@intepecise.de www.idc-beaings.com Full complement cylindical
More informationHard metals for precision tools
had mateial mattes Had metals fo pecision tools CERATIZIT - the paent companies Headquates and paent company in MAMER / Luxemboug Paent company in REUTTE / Austia iect sales and distibution patnes 2 Ou
More informationAngles Hot rolled, weldable structural steel sections
Data sheet: E3.1 Angles Hot olled, weldable stuctual steel sections Geneal desciption AceloMittal Steel South Afica, Newcastle Steel poduces an extensive ange of stuctual steel angles. Non-standad sizes
More informationUNIWORX PLUS. All-purpose corner radius/high-feed milling cutter for countless finishing options
UNIWORX PLUS Allpupose cone adius/highfeed milling cutte fo countless finishing options uniwox plus cone adius / high feed millng cutte bodies Milling cutte bodies uniwox PLUS univesal cone adius and HIGHfeed
More informationTable 23 Production of minor oil products from refineries - by type Thousand metric tons
Table 23 Production of minor oil from refineries - by type Table Notes Data refer to production from refineries of refinery, ethane, naphtha, lubricants, bitumen, paraffin, petroleum, white spirit, and
More informationImports of seed for sowing by country Calendar year 2011 Source: ISF compilation based on official statistics and international seed trade reports
USA 157,432 15,562 464 173,458 523 318 67 908 Germany 195,159 5,913 520 201,592 595 97 22 714 France 125,701 4,389 277 130,367 522 150 11 683 Netherlands 140,899 12,253 796 153,948 250 330 48 628 Italy
More informationLifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
More informationFEDERAL RESERVE statistical release
FEDERAL RESERVE statistical release FOR IMMEDIATE RELEASE MARCH 16, 1992 E.U C1Z1, GEOGRAPHICAL r DISTRIBUTION n OF e ASSETS AND^LIABILITIES (IN MILLIONS OF DOLLARS) ASSETS COUNTRY OF CUSTOMER 12/31/90
More informationSummary of debt securities outstanding
Summary of debt securities outstanding All countries........................ 22,695 15,852 6,665 3,427 1,762 Developed countries........................ 16,504 13,087 5,869 2,716 701 Austria 510 173 44
More informationBurrs Burrs Table of Contents General Information Tool drive Contents Page Tool drive Contents Page Resharpening Ordering instructions
Bus Bus Tble of Contents Bus Genel Infomtion Tool dive Contents Pge Genel infomtion The fst wy to the best tool 4-5 TC bus (TC = tungsten cbide) TC bus 6-17 shnk mm shnk 6 mm shnk 8 mm Tool dive Contents
More information67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production
Renewable energy 44 Other renewables consumption 45 Biofuels production Appendices A1 Solar Generation A2 Wind Generation A3 Geothermal, biomass and other Generation A4 Geothermal Cumulative installed
More informationTable 13 Production, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years
Table 13, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years Table Notes The Reserves / ratio refers to crude oil and natural
More informationTable 13 Production, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years
Million metric tons Million metric tons Table 13, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years Table Notes The Reserves
More informationTable 13 Production, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years
, trade and supply of conventional crude oil Thousand metric tons; kilograms per capita; reserves production ratio (R/P) in years Table Notes The Reserves / ratio refers to crude oil and natural gas liquids.
More informationDeep Groove Ball Bearings
Deep Goove all eaings Open type Shielded type Sealed type (non-contact) Expansion Compensating eaing 1. Design featues and special chaacteistics Deep goove ball beaings ae vey widely used. A deep goove
More informationEaton Aeroquip Triple Crown
Eaton Aeoquip Bette in evey way that mattes Tempeatue Abasion Resistance Eaton engineeing does it again. Select Aeoquip hydaulic hoses, including new MatchMate Global hoses, offe distinct advantages in
More informationJURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 10 NOVEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA
More informationGlobal Competitiveness Index Rankings
APPENDIX B Global Competitiveness Index 2017 2018 Rankings The following pages report the GCI 2017 2018 rankings for the three subindexes (Table 1) and their corresponding pillars (Tables 2 4). Detailed
More informationJURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 15 DECEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA
More informationGlobal Dialysis - Cost per Dialysis Session
Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis
More informationRotary burrs 238 PRECISION TOOLS
ROTARY BURRS 09 Rotary burrs The high-performance tungsten carbide rotary burrs provide maximum cutting edge stability with a simultaneous high tenacity of the cutting edge. Alu high-performance tungsten
More informationTable 16 Refinery distillation capacity, throughput and output Thousand metric tons
Million metric tons Table 16 Refinery distillation capacity, throughput and output Table Notes Output is equal to the sum of production from refineries for aviation gasoline, bitumen, gas/diesel oil, ethane,
More informationProduction of minor oil products from refineries - by type Thousand metric tons
Production of minor oil from refineries - by type Table 23 Table Notes Data refer to production from refineries of refinery, ethane, naphtha, lubricants, bitumen, paraffin, petroleum, white spirit, and
More informationEaton EMEA Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton EMEA Coe Hydaulic Hose Poducts Bochue Success made simple. The new standad fo hydaulic hose and fittings. Sometimes less is moe. Fewe poducts, smate choices. Eaton is taking a new appoach to helping
More informationJURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS STATUS 27 JULY 2018 ORIGINAL CONVENTION 27-05-2010) OR OR 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013
More information9.01 ICT use for business-to-business transactions
9.01 ICT use for business-to-business transactions To what extent do businesses in your country use ICTs for communicating and carrying out transactions with other businesses? [1 = not at all; 7 = extensively]
More informationSafety Group. Product. Control. The purpose of. fuses. If. insulation rating
Product Safety Group 1201 South Second Street Milwaukee, WI USA 53204 productsafety@ra.rockwell.com PRODUCT NOTICE Notice of Potential Product Concern Rockwell Automation issues a Product Notice when it
More informationSummary of Contributions to UN Peacekeeping by Country and Post.
Summary of Contributions to UN Peacekeeping by Country and Post. Police,UN Military, s and Troops 31/07/2018 1 Country Name POST MALE FEMALE TOTAL Algeria 2 3 4 5 6 7 Argentina Armenia Australia Austria
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Polígono Indutial O Rebullón s/n. 36416 - Mos - España - odavigo@odavigo.com Technical featues Pecision combined beaings Types AXN and ARN combined
More informationLPI ranking and scores, 2014
ing and scores, 2014 Germany 1 4.12 100.0 Netherlands 2 4.05 97.6 Belgium 3 4.04 97.5 United Kingdom 4 4.01 96.6 Singapore 5 4.00 96.2 Sweden 6 3.96 94.9 Norway 7 3.96 94.8 Luxembourg 8 3.95 94.4 United
More information2.01 Availability of latest technologies
2.01 Availability of latest technologies To what extent are the latest technologies available in your country? [1 = not available; 7 = widely available] 2010 2011 weighted average RANK COUNTRY/ECONOMY
More informationCSM-K. high capacity clean steam generator
CSM-K high capacity clean steam generator High capacity clean steam generator Spirax Sarco, the world s leading steam system specialist, has combined modern technology with package design expertise to
More information5.01 Secondary education enrollment rate
5.01 Secondary education enrollment rate Gross secondary education enrollment rate 2011 or most recent year available RANK COUNTRY/ECONOMY Value 1 Australia 8...131.3 2 Spain...128.5 3 Seychelles...123.9
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Technical featues Pecision combined beaings Types AXN and ARN combined beaings and thei deivatives consist of a adial needle beaing with cage, in
More informationTable 5 Production, trade and supply of hard coal Thousand metric tons and kilograms per capita
Table Notes Production includes production from other sources as defined in the previous table. Data for China include brown coal. Please refer to the Definitions Section on pages ix to xv for the appropriate
More informationTable 5 Production, trade and supply of hard coal Thousand metric tons and kilograms per capita
Table Notes Production includes production from other sources as defined in the previous table. Data for China include brown coal. Please refer to the Definitions Section on pages ix to xv for the appropriate
More informationTable 16 Refinery distillation capacity, throughput and output Thousand metric tons
Table 16 Refinery distillation capacity, throughput and output Table Notes Output is equal to the sum of production from refineries for aviation gasoline, bitumen, gas/diesel oil, ethane, feedstocks, gasoline-type
More informationProduct Overview INCH
INCH Product Overview CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making gearboxes and variators for light industry applications. Reliable partner in power transmission equipment
More informationCylindrical Roller Bearings
ylindical olle eas ontents Seies M1000, 1200, 1300, 1900, 5200, 5300, 7300 Intoduction... G-1 Pictoial Index... G-3 Selection... G-5 atings... G-7 Dimensions... G-15 Shaft Dimensions... G-25 Housing Dimensions...
More informationPacking Data Installation Instructions
Packing Data PK Installation Instructions This document describes how to install a Dataliner DL10 display in a panel or enclosure and connect power. European Union Directive Compliance wiring and safety
More informationUrchin 7 cflag.ifas.ufl.edu Page 1 of 2 Standard View Export All Visits Permalink Geo Location Jul 1, 2015 - Jul 31, 2015 First Date 2015 Compare to Past Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
More information2014/ /2015 Ghana / /2015 Syrian Arab Republic / /2015
Exhibit C: international cotton trade data Source: International Cotton Advisory Committee, ICAC World Cotton Database, available at www.icac.org, last checked 1 April 2016. International Cotton Advisory
More informationTungsten Carbide Burrs
Tungsten Carbie Burrs Material Groups,, Types of Cut PFERD tungsten carbie burrs are esigne for machining materials of virtually any strength. Their superior performance reflects an optimum combination
More informationTriple-Sealed Bearings for Bearing Units
Fo New Technology Netwok copoation R Tiple-Sealed eaings fo eaing Units NTN Tiple-Sealed eaings fo eaing Units These eliable tiple-sealed beaings ae dustpoof and watepoof. They ensue a longe beaing life
More informationPBT Pressure Transmitter
DatA S h e e t PBT Pressure Transmitter The PBT is a universal electronic transmitter used in general industrial applications. The transmitter PBT is designed for measurement in liquid and gaseous media.
More informationA snapshot of Drinking Water, Sanitation and Hygiene. in the WHO Region of the Americas
A snapshot of Drinking Water, Sanitation and Hygiene in the WHO Region of the Americas Photo: fololia/garrett Hoffmann 217 Update and SDG Baselines Prepared by: WHO/UNICEF Joint Monitoring Programme for
More informationA snapshot of Drinking Water, Sanitation and Hygiene. in the UNICEF Latin America & Caribbean Region
A snapshot of Drinking Water, Sanitation and Hygiene in the UNICEF Latin America & Caribbean Region Photo: fololia/garrett Hoffmann 217 Update and SDG Baselines Prepared by: WHO/UNICEF Joint Monitoring
More informationTASK FORCE TIPS. *** Automatic Nozzle ***
TASK FORCE TIPS *** Automatic Nozzle *** Chief Clyde McMillan Valparaiso, Indiana 1968 Established in 1971 200 Employees 14,000 m2 TASK FORCE TIPS Represented in over 60 Countries Algeria, Argentina, Australia,
More informationSection III Macroeconomic environment
Data Tables Section III Macroeconomic environment 2.2: Data Tables Section III: Macroeconomic environment 422 3.01 Government budget balance General government budget balance as a percentage of GDP 2010
More informationTWIN-SAF SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING TN-P00 GROOVING TN-P00 TURNING TN-P00 PROFILING TN-F00 TN-F90 FACE GROOVING
/ PARTING & GROOVING / PROGRAM OVERVIE TIN-SAF SYSTEM PARTING TN-P00 TN-B02 48 380 Shank... p 172 Blade... p 176 Blade holde. p 177 p 169 p 171 GROOVING TN-P00 28 38 48 88 380 Shank... p 172 p 168 p 168
More informationcontrol & instrumentation solutions The AEL6 series smart electric actuator
control & instrumentation solutions The AEL6 series smart electric actuator E X P E R T I S E S O L U T I O N S S U S T A I N A B I L I T Y 1 A E L 6 AEL6 series Our newly launched smart electric actuator
More informationInstallation Manual 485 Data Module Type B
Installation Manual 485 Data Module Type B 485BRD-10-IA-en-11 Version 1.1 ENGLISH Legal Provisions SMA Solar Technology AG Legal Provisions The information contained in this document is the property of
More informationTVS100 and LD-PeCo People Counting Systems. These systems count people even in the largest of crowds wherever they gather.
P r o d u C t i n f o r m at i o n TVS100 and LD-PeCo People Counting Systems These systems count people even in the largest of crowds wherever they gather. People counting, access control, support for
More informationPart List ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI. Seat. Armrests. Star Base. Caster. Arm Bolts. Back Bolts (M8 X 15mm) J K.
ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI Pat List Key Desciption Pat Qty. Spae A FUZ5B-LO Backest B FUZ6B-HI Backest C Seat D Amests ( left & ight amest) 2 E Seat Post(Cylinde) F Sta Base G Caste 5 H Am
More informationS t a t i s t i c a l b o o k s. Energy. Yearly statistics edition
S t a t i s t i c a l b o o k s Energy Yearly statistics 2005 2007 edition EuropEan Commission Europe Direct is a service to help you ind answers to your questions about the European Union Freephone number
More informationFiche 1 Quelques données de la Banque Mondiale
Fiche 1 Quelques données de la Banque Mondiale 274 WORLD DEVELOPMENT REPORT 2000 2001 Table 1. Size of the economy Surface Population area density Gross national product (GNP) GNP per capita GNP measured
More informationInstallation Manual 485 Data Module Type B
Installation Manual 485 Data Module Type B 485BRD-10-IA-en-12 Version 1.2 ENGLISH Legal Provisions SMA Solar Technology AG Legal Provisions The information contained in this document is the property of
More informationMicrosoft Social Engagement Translation Guide Last Updated: October 2017
Microsoft Social Engagement Translation Guide Last Updated: October 2017 Microsoft Social Engagement is translated and supported by Microsoft and made generally available in the countries/regions and languages
More informationMaxi Sky 2 for G Track Profile
Maxi Sky 2 for G Track Profile Installation Instructions 001-14464 -EN Rev 0 02/2017...with people in mind Design Policy and Copyright and are trademarks belonging to the ArjoHuntleigh group of companies.
More informationBiofuels Strategy: Background memo
MEMO/06/65 Brussels, 8 February 2006 Biofuels Strategy: Background memo Key facts and figures Biofuel production - Biofuels are transport fuels produced from biomass feed-stocks (i.e. organic material).
More informationTable 19 Production, trade and supply of other kerosene Thousand metric tons and kilograms per capita
Table Notes Production includes output from refineries and plants. For China, data include kerosene-type jet fuel. Please refer to the Definitions Section on pages ix to xv for the appropriate product
More informationCotton This Month. Major Changes in Supply and Demand Estimates and Projections
1629 K Street NW, Suite 702 Washington, DC 20006, USA Cotton This Month February 1, 2018 Major Changes in Supply and Demand Estimates and Projections India Mexico Pakistan United States 2017/18 production
More informationCotton This Month. Major Changes in Supply and Demand Estimates and Projections
1629 K Street NW, Suite 702 Washington, DC 20006, USA Cotton This Month March 1, 2018 Major Changes in Supply and Demand Estimates and Projections Brazil China Turkey United States 2017/18: production
More informationAllen-Bradley 1397 Pulse Encoder Interface Card
Installation Instructions IN Allen-Bradley 1397 Pulse Encoder Interface Card Cat. No. 1397-PE Table of Contents What This Option Provides........................ 1 Where This Option Is Used........................
More informationTungsten Carbide Rotary Burrs.
Tungsten Carbide Rotary Burrs www.procut.ie Introduction Procut is an internationally renowned brand of high quality carbide burrs, and forms a key part of ATA Group, a privately owned organisation with
More informationDelegations will find attached Commission document SEC(2006) 1167.
COUNCIL OF THE EUROPEAN UNION Brussels, 26 September 2006 13217/06 ADD 1 Interinstitutional File: AGRI 297 AGRISTR 38 AGRIFIN 78 AGRIORG 76 ENV 491 ENER 217 COVER NOTE from: Secretary-General of the European
More informationEPDRF. High-Precision Four Flute Corner Radius End Mills for Deep Machining FEATURES. Flute shape provides both rigidity and excellent chip removal.
High-Pecisio Fou Flute Coe Radius Ed Mills fo Deep Machiig FEATURES Flute shape povides both igidity ad excellet chip emoval. Upecedeted coe adius accuacy of ±0.005mm. Bottom flute wipe effect educes chatteig
More information1204 Terminator. Instructions 1204 T F B2. (Catalog Number 1204-TFA1, 1204-TFB2) Where this Option is Used. What this Option Contains
Instructions 1204 Terminator (Catalog Number 1204-TFA1, 1204-TFB2) Where this Option is Used The 1204 Terminator Option can be installed in most adjustable frequency AC drive applications to increase protection
More informationWorld Air Conditioner Demand by Region
World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning Industry Association 1 World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning
More informationThe Right Tool at the Right Time. High Performance Replaceable Head Drills
The Right Tool at the Right Time High Performance Replaceable Head Drills 11-2009 Features&Benefits Material Replaceable heads in tough micrograin carbide and hardened steel body with high gloss nickel
More informationslotworx Square shoulder face milling and slotting cutters with highly modern cutting edge geometry for universal applications
slotwox Squae shoulde face milling and slotting cuttes with highly moden cutting edge geomety fo univesal applications Object slotwox 177183 squae shoulde face milling cutte bodies milling cutte bodies
More informationPotential Danger of Fire or Explosion Read this letter now!
Elster GmbH Postfach 28 09 49018 Osnabrück Strotheweg 1 49504 Lotte (Büren) Deutschland Tel. +49 541 1214-0 Fax +49 541 1214-370 hts.lotte@honeywell.com ThermalSolutions.honeywell.com Potential Danger
More informationCitrus Fruit - Fresh and Processed Statistical Bulletin 2016
CITRUS FRUIT FRESH AND PROCESSED STATISTICAL BULLETIN 2016 Citrus Fruit - Fresh and Processed Statistical Bulletin 2016 Market and Policy Analysis of Raw Materials, Horticulture and Tropical (RAMHOT)
More informationTungsten Carbide Rotary Burrs.
Tungsten Carbide Rotary Burrs www.morrisflex.co.uk Introduction groupuk Morrisflex is an internationally renowned brand of high quality carbide burrs and forms a key part of ATA Group, a privately owned
More information3rd Meter Gauge Group CEO s Conference. Brisbane. 10 May, rd Meter Gauge CEO's Conference in Brisbane - 10th May,
3rd Meter Gauge Group CEO s Conference Brisbane 10 May, 2004 1 UIC Members UIC Member 163Members 2 UIC Meter Gauge Group UIC Meter Gauge Group was established as a special group for meter gauge railways
More informationPFT - the Flexible Pressure Transmitter
DaTa S h e e t PFT - the Flexible Pressure Transmitter The PFT is distinguished by its high-quality measurement technology. The device is well suited to solve demanding measurement tasks in industrial
More informationHOIST CATALOGUE. high capacity hoists. ponte rolante suwnice gruas cranes pont-roulant 电动桥式起重机
HOIST CATALOGUE high capacity hoists A New Conception Future Technology GH has manufactured hoists and other lifting equipment for over 50 years. More than 100,000 installations are the proof of our experience
More informationHIPERDRIVE HDA70: Integrated positioning drive with absolute measurement system for format adjustment
HIPERDRIVE HDA0: Integrated positioning drive with absolute measurement system for format adjustment power transmission, brushless DC motor, absolute encoder plus control and power electronics in a drive.
More informationInstallation Manual SMA POWER CONTROL MODULE
Installation Manual SMA POWER CONTROL MODULE PWCBRD-10-IA-en-13 Version 1.3 ENGLISH Legal Provisions SMA Solar Technology AG Legal Provisions The information contained in this document is the property
More informationPrimary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
More informationEVOline Socket Modules
203 Protection types in sockets. Colour table Standard-colours To order other colours in RAL-Tones, please contact us. With contact protection Contact protection: Contact socket with child protection (increased
More informationMajor Changes in Supply and Demand Estimates and Projections
INTERNATIONAL COTTON ADVISORY COMMITTEE 1629 K Street NW, Suite 702, Washington, DC 20006 USA Telephone (202) 463-6660 Fax (202) 463-6950 email secretariat@icac.org COTTON THIS MONTH February 1, 2016 Major
More informationProduction (bbl/day)
1 of 5 14/09/2011 22:15 From Wikipedia, the free encyclopedia This is a list of countries by oil production mostly based on CIA World Factbook data. [1] Note that oil production refers to the sum of barrels
More informationISSN Statistical books. Energy. Yearly statistics edition
ISSN 1830-7833 Statistical books Energy Yearly statistics 2006 2008 edition Statistical books Energy Yearly statistics 2006 2008 edition Europe Direct is a service to help you find answers to your questions
More informationCharging and testing unit FPU for Bladder, Piston and Diaphragm Accumulators
Charging and testing unit FPU for Bladder, Piston and Diaphragm Accumulators 1. DESCRIPTION 1.1. FUNCTION The HYDAC charging and testing unit FPU is used to charge accumulators with nitrogen or to check
More informationMajor Changes in Supply and Demand Estimates and Projections
INTERNATIONAL COTTON ADVISORY COMMITTEE 1629 K Street NW, Suite 702, Washington, DC 20006 USA Telephone (202) 463-6660 Fax (202) 463-6950 email secretariat@icac.org COTTON THIS MONTH April 1, 2016 Major
More information