urban lighting DELOS

Size: px

Start display at page:

Download "urban lighting DELOS"

Cory Hudson
5 years ago
Views:

1 228 urban lighting

229 STRUCTURE SERIES AVAILABLE IN TWO DIMENSIONS FOR APPLICATIONS FROM 5m TO 10m. UPPER JOINT CONSISTING OF An ALUMINIUM HUB Ø 65mm. AVAILABLE MOUNTING SYSTEM FOR INSTALLATION ON An STRETCHED CABLE.

LOWER PART IN MOULDED AND DRAWN STEEL PLATE FIXED TO THE UPPER PART WITH AN IRREMOVABLE, HERMETIC and MECHANICAL SYSTEM WITHOUT THE USE OF SCREWS OR RIVETS.

2 229 STRUCTURE SERIES AVAILABLE IN TWO DIMENSIONS FOR APPLICATIONS FROM 5m TO 10m. UPPER JOINT CONSISTING OF An ALUMINIUM HUB Ø 65mm. AVAILABLE MOUNTING SYSTEM FOR INSTALLATION ON An STRETCHED CABLE. CENTRAL BODY IN TURNED ALUMINIUM SHEET WITH BRACKETS IN DIE-CAST ALUMINIUM EN LOWER PART IN MOULDED AND DRAWN STEEL PLATE FIXED TO THE UPPER PART WITH AN IRREMOVABLE, HERMETIC and MECHANICAL SYSTEM WITHOUT THE USE OF SCREWS OR RIVETS. LOWER FRAME IN DIE CAST ALUMINIUM EN 1706, HINGED WITH AN OPENING SYSTEM TOWARDS THE BOTTOM. PERIMETER SEAL ABLE TO GUARANTEE AN IP66 PROTECTION DEGREE. POWER SUPPLY CABLE ENTRY THROUGH WATERTIGHT CABLE GLAND. OPENING OF THE LOWER FRAME BY A SINGLE LOCKING MACHANISM. THE OPENING OF THE LOWER RING IS POSSIBLE WITHOUT TOOLS ( WITH THE USE OF A FAST OPENING KNOB). METALLIC PLATE SUPPORTING OPTICAL GROUP, POWER SUPPLY UNIT AND LAMP. INSULATED AND REMOVABLE CABLE TRAY. TOTAL PROTECTION DEGREE IP66. INSULATION CLASS II.

230 urban lighting OTTICA S ST OTTICA ST OTTICA OC S OTTICA S OTTICA S OTTICA ST OTTICA ST OC OTTICA OC OTTICA OC 70W SHP-T PO 70W SHP-T 70W SHP-T Gamma Angles 180 120 Gamma Angles 180 120 Gamma

3 230 urban lighting OTTICA S ST OTTICA ST OTTICA OC S OTTICA S OTTICA S OTTICA ST OTTICA ST OC OTTICA OC OTTICA OC 70W SHP-T PO 70W SHP-T 70W SHP-T Gamma Angles Gamma Angles Gamma Angles Coordinate system C-Gamma, polar graph. STREET LIGHTING Coordinate system C-Gamma, polar graph. Urban lighting Coordinate system C-Gamma, polar graph. pedestrian AND CYCLE path lighting

4 231 OPTICAL UNIT AVAILABLE WATTAGES LAMP HOLDER IN PORCELAIN WITH DEVICE FOR THE ADJUSTMENT OF THE LAMP FOCUS (ONLY FOR ST OPTICS) ACCORDING TO ITS WATTAGE AND TYPE. POSSIBILITY TO INSTALL THREE DIFFERENT OPTICS FOR SPECIFIC APPLICATIONS: ST ( 1 and 2): ASYMMETRIC STREET OPTIC IN 99,85% ANODISED, POLISHED AND MOULDED BY DRAWING ALUMINIUM, WITH FOCUS ADJUSTABLE IN SIX DIFFERENT POSITIONS IN ORDER TO OPTIMIZE THE LIGHT EMISSION ONTO THE STREET SURFACE. S ( 1 AND 2): SYMMETRIC OPTIC IN EXTRA PURE PRE-ANODISED ALUMINIUM. OC ( 1): ASYMMETRIC OPTIC FOR CYCLE AND PEDESTRIAN PATHS IN EXTRA-PURE PRE-ANODISED ALUMINIUM. CLOSING SCREEN IN FLAT TEMPERED GLASS WITH SERIGRAPHY IN ORDER TO GUARANTEE COMPLIANCE EVEN WITH THE STRICTEST REGULATIONS CONCERNING LIGHT POLLUTION. 4mm THICKNESS. TRANSPARENT GLASS BOWL UPON REQUEST. 4mm THICKNESS. 1: from 50W to 150W SHP. from 35W to 100W White SON. from 35W to 150W MHL. from W to 140W Cosmopolis. from 26W to 57W FS. 2: from 50W to 400W SHP. from 35W to 100W White SON. from 35W to 400W MHL. from W to 140W Cosmopolis. OTTICA S ST OTTICA ST OTTICA OC S OTTICA S OTTICA ST OTTICA OC 150W SHP-T PO Gamma Angles Gamma Angles 250W SHP-T Coordinate system C-Gamma, polar graph. STREET LIGHTING Coordinate system C-Gamma, polar graph. Urban lighting

232 urban lighting INSTALLATION EXAMPLES STREET LIGHTING H I L S Tab.

Unilateral right 7 28 8,00 0,00 C2 0, 0,43 0, 9,6% 11 0,80 0 2 150W SHP-T P0 Unilateral right 8 30 8,00 0,00 C2 1,21 0,44 0,71

14,00 0,00 C2 1,19 0,61 0, 7,16% 18 0,80 0 2 150W SHP-T P1 Staggered 8 30 16,00 0,00 C2 1,61 0, 0,73 8,08% 24 0,80 0

SHP-T P1 Unilateral right 4 20 4 0 20 7 47 0,80 0 H: (m) Post height. I: (m) Spacing. L: (m) Street width.

5 232 urban lighting INSTALLATION EXAMPLES STREET LIGHTING H I L S Tab. R Lm U0 Ul Ti% Em Mf Tilt 1 70W SHP-T P0 Unilateral right ,00 0,00 C2 1,06 0,42 0,64 10,3% 18 0, W SHP-T P1 Unilateral right ,00 0,00 C2 0, 0,43 0, 9,6% 11 0, W SHP-T P0 Unilateral right ,00 0,00 C2 1,21 0,44 0,71 8,39% 21 0, W CDO-TT P0 Unilateral right ,00 1,00 C2 1,07 0, 0,57 7,76% 19 0, W SHP-T P0 Staggered ,00 0,00 C2 1,19 0,61 0, 7,16% 18 0, W SHP-T P1 Staggered ,00 0,00 C2 1,61 0, 0,73 8,08% 24 0,80 0 PEDESTRIAN/CYCLE PATH LIGHTING H I L S Em E min E max Mf Tilt 1 70W SHP-T P0 Unilateral right , W SHP-T P1 Unilateral right ,80 0 H: (m) Post height. I: (m) Spacing. L: (m) Street width. S: (m) device Projection. Lm: (cd/m 2 ) Average luminance. U0: General uniformity. Ul: Longitudinal uniformity. Ti: Glare factor. Em: (LUX) Average illumination. Mf: Maintenance coefficient. Tilt: Device inclination angle.

THE GEAR TRAY INCLUDES: POWER SUPPLY UNIT, IGNITOR, CAPACITOR, LAMP AND AC MAIN CONNECTOR.

6 233 WIRING ALL WIRING COMPONENTS ARE INSTALLED AT THE SIDE OF THE RIFLECTOR. ALL COMPONENTS ARE MOUNTED ON A METALLIC GEAR TRAY INSULATED FROM THE FRAME BY PLASTIC SPACERS. THE GEAR TRAY INCLUDES: POWER SUPPLY UNIT, IGNITOR, CAPACITOR, LAMP AND AC MAIN CONNECTOR. ON-LOAD SWITCH AUTOMATICALLY DISCONNECTS THE ELECTRICAL WIRING UPON OPENING THE FRAME. LAMP CHANGE WITHOUT THE USE OF TOOLS. INSULATION CLASS II. REFERENCE STANDARDS CE EN EN EN

7 234 STREET

8 235 AVAILABLE VERSIONS 1: ø 627x237mm FOR ON BRACKET APPLICATION OR INASTALLATION ON STRETCHED CABLE. 2: ø 630x350mm FOR ON BRACKET Ø550 APPLICATION OR INASTALLATION ON STRETCHED CABLE. 240 Ø Ø627 Ø627 LAMP and CAP/BASE 1 ST-S-OC (no ST optic) 50 W SHP E27 70 W SHP E27 RX7S 100 W SHP E W SHP E40 RX7S 35 W WHITE SON PG W WHITE SON GX12 PG W WHITE SON GX12 PG W MHL G12 50 W MHL E27 70 W MHL E27 E27 G12 RX7S 100 W MHL E27 E W MHL E27 E40 G12 RX7S W COSMOPOLIS PGZ12 W COSMOPOLIS PGZ12 W COSMOPOLIS PGZ W COSMOPOLIS PGZ12 26 W FS GX24Q-3 32 W FS GX24Q-3 42 W FS GX24Q-4 57 W FS GX24Q-5 (only ST) LAMP and CAP/BASE 2 ST-S (no ST optic) 50 W SHP E27 (only ST) 70 W SHP E27 (only ST) 100 W SHP E W SHP E40 RX7S 250 W SHP E40 FC2 400 W SHP E40 FC2 35 W WHITE SON PG12-1 (onlyst) 50 W WHITE SON GX12 PG12-1 (only ST) 100 W WHITE SON GX12 PG W MHL G12 (only ST) 70 W MHL E27 (only ST) E27 (only ST) G12 (only ST) 100 W MHL E27 E W MHL E27 E40 G12 RX7S 250 W MHL E40 G12 FC2 400 W MHL E40 FC2 W COSMOPOLIS PGZ W COSMOPOLIS PGZ12 VERSIONS for CDO-ET and CDO-TT lamps (order SHP wiring)

9 236 STREET

10 237 MPD-SERIES BRACKET 0 BRACKET COMPOSED OF A SECTION IN EXTRUDED ALUMINIUM AND TWO SUPPORTING ELEMENTS IN CAST IRON G20, FIXED BY MEANS OF SCREWS AND BOLTS. AVAILABLE VERSIONS (TWO lengths): 1000mm AND 0mm. Delos2 POST-TOP MOUNTING SYSTEM IN CAST IRON G WITH CAST DECOR ø 1mm AND length 3mm Delos FOR 1000 POLES PD SERIES WITH FINAL SPIGOT ø mm AND length 200mm. stainless STEEL SCREWS AND BOLTS. STANDARD COLOUR GRAPHITE GRAY. VERSION WITH BRACKETS. MPD/C-SERIES BRACKET TYPE COLOuRs DESCRIPTION MPD/C 1/1 L= 0 1 Side bracket 0 MPD/C 1/2 L= 0 Unit with 2 brackets MPD/C 1/3 L= 0 Unit with 3 brackets 0 MPD/C 1/4 L= 0 Unit with 4 brackets MPD/L-SERIES BRACKET TYPE COLOuRs DESCRIPTION MPD/L 1/1 L= Side bracket MPD/L 1/2 L= 1000 Unit with 2 brackets MPD/L 1/3 L= 1000 Unit with 3 brackets MPD/L 1/4 L= 1000 Unit with 4 brackets GRAPHITE (COD. 01) 0 0 MSPD-SERIES 0 BRACKET 0 BRACKETS CAN BE ALSO INSTALLED IN STAGGERED VERSION AT LOWER HEIGHTS. THE PD SERIES POLE MUST BE EQUIPPED WITH A 7 SPECIAL ACCESSORY AT THE TAPERING LEVEL. Ø Ø Ø MSPD/C-SERIES BRACKET TYPE COLOuRs DESCRIPTION MSPD/C 127/1/S L= 0 1 Side bracket Ø 127 MSPD/L-SERIES BRACKET TYPE COLOuRs DESCRIPTION MSPD/L 127/1/S L= Side bracket GRAPHITE (COD. 01)

11 238 urban lighting 10,0m 9,0m 8,2m Ø 7,2m Ø Ø1 6,1m Ø Ø1 5,2m Ø Ø1 Ø127 Ø1 Ø127 Ø127 Ø159 Ø159 Ø159 Ø193 TYPE BRACKET PD 5 PD 6 PD 7 PD 8 1 MPD MSPD 2 MPD MSPD HATCH PD 5 PD 6 PD 7 PD 8 RESET 0018 RESET 0D18 hatches, complete with terminal boards, are available with one or two fuses.

12 I 239 CE EN40 Ø SUPPORTS BASE PLATES Ø CYLINDRICAL TAPERED POLES ARE EQUIPPED THE PD POLES SERIES CAN BE INSTALLED Ø1 WITH A SPIGOT FOR THE INSTALLATION OF MPD WITH BASE PLATE UPON REQUEST. SERIES BRACKETS. Lt I t t PD POLES, IN S235JR STEEL, ARE AVAILABLE IN Ø1 HEIGHTS OF m. DECORATIVE SQUARED BASE IN CAST IRON AT GROUND LEVEL. Ø DIMENSIONS 310x310x51mm (FOR POLES ø 159mm ØDmax AT THE BASE) AND 3x3x55mm (FOR POLES Lt Ø127 ø 193mm AT THE BASE). SERIES POLE 5m: COMPOSED OF TWO Lg Ø127 SECTIONS ø159mm AND ø1mm. SPIGOT ø mm. Ø SERIES POLE 6-7m: COMPOSED OF THREE SECTIONS ø159mm, ø127mm, AND ø1mm. SPIGOT ø mm. SERIES POLE m: COMPOSED OF THREE SECTIONS ø193mm, ø127mm AND ø1mm. ØDmax Lg Ø193 Ø193 BASE PLATE FOR PD SERIES POLES* COMPATIBLE POLES Lg (mm) I (mm) Ø (mm) T (mm) Lt (mm) Dmax (mm) PD5 - PD6 - PD M PD8 - PD9 - PD M * BASE PLATE TYPE, MATERIAL, AND THICKNESS DEPEND ON POLE TYPE, FITTING NUMBER, AnD INSTALLATION SITE. ONCE REQUESTED, THE BASE PLATE MUST BE APPROVED BY AEC TECHNICAL DEPARTMENT. PD 9 PD 10 HATCH serie Reset STANDARD 1-2 FUSIBILI PD 8 PD 10 GRAPHITE Cod. 01

NANOCERAMICAL COATING AND SUBSEQUENTLY COATED WITH POLYESTER POWDERS.

13 240 urban lighting COATINGS AND COLOURS METALLIC PARTS ARE PROTECTED BY A PHOSPHOCROMATION PROCESS OR A SPECIAL TREATMENT WITH NANOCERAMICAL COATING AND SUBSEQUENTLY COATED WITH POLYESTER POWDERS. COLOUR TABLE GRAPHITE GREY WITH SATINY EFFECT Cod. 01 STANDARD 7,3m 6,3m 5,3m

14 241 10,1m 9,1m 8,3m

264 urban lighting VIGILA

264 urban lighting VIGILA 264 urban lighting 265 STRUcture FITTING FOR URBAN LIGHTING APPLICATION. POST-TOP VERSION FOR CYLINDRICAL SECTION POLES. aluminium BODY. FRAME OPENING THROUGH FOUR FAST RELEASE HOOKS PLACED ON THE UPPER