Cree Square LED High Output Series

Transcription

1 Cree Square LED High Output Series MINI Product Description Conceived with an essential design, this luminaire has a simple square shape which practically integrates in all environments; also its square profile with rounded edges reduces wind exposure. Cree Square LED Series is conceived with a die-cast aluminium housing, with a powder finish after treatment of the surfaces which protects the fixture from corrosion, fading and peeling. It is equipped with a closing plate that mounts a stand alone light-engine, all powered by Cree technology and featuring the NanoOptic Precision Delivery Grid optic system. With many available optics and an extensive range of mounting brackets, Cree LED Square Series enhance interchangeable configurations. The possible applications are endless: street lighting and urban decoration, general area lighting and parking lots, spotlight for monuments and facades. Performance Summary NanoOptic Precision Delivery Grid optic Lumens: up to 8100 lm CRI: Minimum 70 CRI CCT: 3000K or 4000K or 5700K 305mm Lifetime color consistency: 4SDM Limited Warranty : 5 years on luminaire 127mm Ordering Information Fully assembled luminaire is composed of two components that must be ordered separately. Example: Luminaire: SMI-E-2LG-B-30K-+-24-BK-FX-S-01 + Mount: SMI-SQBK SMI - E - 2LG - B - 30K WH - FX - S - 01 Product Version Optic CCT Insulation Class Voltage Color Options Variant Cable length SMI - E - 2LG Type II long 275 Type II short Type II short 1,0 2SH Type II short 3SH Type III short 3ME Type III medium 4ME Type IV medium 5ME Type V medium 5SH Type V short - B 63W - 30K 3000K 40K 4000K 57K 5700K - + Class 1 ^ Class V - WH White BK Black SV Silver BZ Bronze - FX Q DM DQ Y- Z DL DY CL Fixed Output Field Adjustable Output Dimming 1-10V Field Adjustable Dimming Virtual Midnight Field Programmable DALI DynaDimmer Constant Lumen Output - S Standard U 10kV F** Fuse - 01 Exit cable 50cm (w/connector) ** Fuse option available with Standard or 10kV configurations (specify SF or UF) Mount (luminaire must be ordered separately) SMI-WM SMI-SQ* SMI-SC1* SMI-SC2* SMI-ADJ* SMI-YM* Wall mount Side arm - square section Side arm - round section Ø102mm Side arm - round section Ø120mm Adjustable arm (OD 60mm) Yoke mount * Color options are: WH White BK Black SV Silver BZ Bronze See for warranty terms

2 Product Specifications ed by Cree technology and featuring the NanoOptic Precision Delivery Grid optic system. CONSTRUCTION & MATERIALS Die cast aluminum housing 50cm cable with quick-connector factory supplied Multiple mounting systems Available finish: Black, White, Silver, Bronze High resistance powder coating with increased anti-ageing and anti-corrosion performance ELECTRICAL SYSTEM Voltage: V or 50/60Hz Factor: > 0.98 at full load Total Harmonic Distortion: < 20% at full load Up to 10kV surge immunity according to EN and EN Available with following controls & dimming: Fixed output / Field adjustable / Virtual midnight reprogrammable / 1-10V / DALI / CLO / Dynadimmer REGULATORY & VOLUNTARY QUALIFICATIONS CE listed CB certificate Risk group exempt in accordance with Standard EN for photobiological safety Enclosure rated IP66 per IEC RoHS compliant UMSUG coding Electrical Data* Watts (W) V Total 50Hz B * Electrical data at 25 C (77 F) Factor Recommended URBAN Series B- Lumen Maintenance Factors () 1 Ambient 25K hr Projected 2 50K hr Projected 2 75K hr Calculated 3-40 C** C** C** C** ** C** C** C C C C C K hr Calculated 3 1 Lumen maintence values at 25 C (77 F) are calculated per TM-21 based on LM-80 data and in-situ luminaire testing 2 In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) Mounting s Mounting SMI-SQ Side arm for square pole Fixed pole bracket with a length of 152 mm or square poles. Mounting SMI-ADJ - Adjustable arm (OD 60mm) Micro-adjustment jointed fitting which turns 360 on the horizontal plane and can be tilted 180 on the vertical plane at 2.5 increments. Mounting SMI-SC1 Side arm for cylindric pole Fixed pole bracket with a length of 152 mm for ø 102 round poles. Mounting SMI-YM - Yoke mount This mounting bracket can be tilted 180 on the vertical plane with double locking steps every 5 increments. It can be adjusted with to side-screws and a safety bolt. Mounting SMI- SC2 Side arm for cylindric pole Fixed pole bracket with a length of 152 mm for ø 120 round poles. Mounting SMI-WM - Wall mount Die-cast aluminium wall mounting box which can be used for direct or indirect lighting. The W-type plate comes with watertight gasket and three knockouts for surface conduits Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content subject to change. See for patents that cover these products. Cree, the Cree logo and NanoOptic are registered trademarks, and Precision Delivery Grid are trademarks of Cree, Inc. or one of its subsidiaries.

3 Control options Field Adjustable Output - B Nominal f (lm) Setting Watts W Lumen Multipliers Asymmetric Symmetric Q9 63 1, Q8 58 0, Q7 56 0, Q6 52 0, Q5 50 0, Q4 48 0, Q3 43 0, Q2 39 0, Q1 33 0, Q , Virtual Midnight Y/Z - B Setting Watts W (High Mode) Nominal f (lm) Nominal f (lm) Asymmetric Symmetric Watts W Asymmetric Symmetric (Low Mode) Y Y Y Y Y Y Z Z Z Z Z Z Dynadimmer - B Setting Watts W (High Mode) Nominal f (lm) Nominal f (lm) Nominal f (lm) Asymmetric Symmetric Watts W Asymmetric Symmetric Watts W Asymmetric Symmetric (Low Mode) (Low Mode) DY7** DY6** DY5** DY4** DY3** DY2** DY1** DY14** DY13* DY12* DY11* DY10* DY9* DY8* DY16** DY15** * Dimming --> on-h22 100%; h22-h24 75%; h24-h6 50%; h6-off 100% ** Dimming --> on-h22 100%; h22-h24 50%; h6-off 100% Ph

4 Photometry All published luminaire photometric testing performed to IESNA LM standards by a NVLAP certified laboratory. To obtain an IES file specific to your project consult: 2LG - Type II Long Lumen Output - 2LG (Type II Long) C0 - C180 C90 - C270 C10-C190 Test Report #: PL SMI-E-3-2LG-B-40K B * delivered lumens at 25 C (77 F). Actual production yield may vary between -4 and +10% of initial delivered lumens Type II Short C0 - C180 C90 - C270 C C197.5 Test Report #: PL SMI-E B-40K Lumen Output (Type II Short 0.75) B * delivered lumens at 25 C (77 F). Actual production yield may vary between -4 and +10% of initial delivered lumens Type II Short 1.0 Lumen Output (Type II Short 1.0) C0 - C180 C90 - C270 C C197.5 Test Report #: PL SMI-E B-40K B * delivered lumens at 25 C (77 F). Actual production yield may vary between -4 and +10% of initial delivered lumens 2SH - Type II Short Lumen Output - 2SH (Type II Short) C0 - C180 C90 - C270 C30-C210 Test Report #: PL SMI-E-3-2SH-B-40K B * delivered lumens at 25 C (77 F). Actual production yield may vary between -4 and +10% of initial delivered lumens Rev. Date: 01 June 2018

5 3SH - Type III Short Lumen Output - 3SH (Type III Short) C0 - C180 C90 - C270 C35 - C215 Test Report #: PL SMI-E-3-3SH-B-40K B * delivered lumens at 25 C (77 F). Actual production yield may vary between -4 and +10% of initial delivered lumens 3ME - Type III Medium Lumen Output - 3ME (Type III Medium) C0 - C180 C90 - C270 C45 - C225 Test Report #: PL SMI-E-3-3ME-B-40K B * delivered lumens at 25 C (77 F). Actual production yield may vary between -4 and +10% of initial delivered lumens 4ME - Type IV Medium Lumen Output - 4ME (Type IV Medium) C0 - C180 C90 - C270 C45 - C225 Test Report #: PL SMI-E-3-4ME-B-40K B * delivered lumens at 25 C (77 F). Actual production yield may vary between -4 and +10% of initial delivered lumens 5ME - Type V Medium Lumen Output - 5ME (Type V Medium) C0 - C180 C90 - C270 C135 - C315 Test Report #: PL SMI-E-3-5ME-B-40K B * delivered lumens at 25 C (77 F). Actual production yield may vary between -4 and +10% of initial delivered lumens

6 5SH - Type V Medium Lumen Output - 5SH (Type V Medium) C0 - C180 C90 - C270 C45 - C225 Test Report #: PL SMI-E-3-5SH-B-40K B * delivered lumens at 25 C (77 F). Actual production yield may vary between -4 and +10% of initial delivered lumens