PRODUCT OVERVIEW: CONVEYOR SYSTEMS

Size: px

Start display at page:

Download "PRODUCT OVERVIEW: CONVEYOR SYSTEMS"

Derrick Riley
5 years ago
Views:

1 PRODUCT OVERVIEW: CONVEYOR SYSTEMS

PRODUCT OVERVIEW: CONVEYOR SYSTEMS 3 PRODUCTS BY AMF-BRUNS IN USE Trough screw conveyor with buckets Troughed Belt Conveyors

Worm Heat Exchangers SWT 250 800 07 Vertical Screw Conveyors SRF 250 1400 08 Troughed Belt Conveyors MGF 300 2000 09 Trough

Conveyors KKF 800 2200 13 Belt Bucket Elevators GBW 80 1250 14 Chain Bucket Elevators KBW 160 1000 15 Flat slide valve,

2 PRODUCT OVERVIEW: CONVEYOR SYSTEMS 3 PRODUCTS BY AMF-BRUNS IN USE Trough screw conveyor with buckets Troughed Belt Conveyors Contents Trough Screw Conveyors TSF Tubular Screw Conveyors RSF Double Screw Conveyors DSF Worm Heat Exchangers SWT Vertical Screw Conveyors SRF Troughed Belt Conveyors MGF Trough Chain Conveyors TKF Scraper Chain Conveyors KKF Scraper Chain Conveyors KKF Scraper Chain Conveyors KKF Belt Bucket Elevators GBW Chain Bucket Elevators KBW Flat slide valve, electrical FLS Flat slide valve, pneumatic FLS Chain conveyor KGB 150 m3 600 m3 18 Diverter flap WSK

3 4 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 5 Trough Screw Conveyors TSF 100 to TSF 1400 Tubular Screw Conveyors RSF 100 to RSF 1400 S235JR (St37)/ / S235JR (St37)/1.4301/ Trough length: up to 8000 mm manufactured in one piece, without intermediate flange Trough length: up to 8000 mm manufactured in one piece, without intermediate flange Direct drive, chain drive or coupling drive Direct drive, chain drive or coupling drive Trough plate gauge: 2 mm to 10 mm, depending on size Trough plate gauge: 2 mm to 10 mm, depending on size Inlet and outlet: Shape, size and position variable Inlet and outlet: Shape, size and position variable Stuffing box, Braided seal Stuffing box, Braided seal Screw diameter: 100 mm to 1400 mm (or as per client s spec) Screw diameter: 100 mm to 1400 mm (or as per client s spec) Auger blade gauge: 2 mm to 12 mm, depending on size (or as per client s spec) Auger blade gauge: 2 mm to 12 mm, depending on size (or as per client s spec) Protective sleeve/baffle plate/cleaning flap/displacer/overflow valve/trough foot/atex/ Protective sleeve/cleaning flap/trough foot/atex/blocking strips/custom paint/ Blocking strips/rpm monitoring/centre bearing/custom paint/special materials/ Special materials/hard facing/rpm monitoring/centre bearing on request/ Hard facing/wear shells/multiple inlets and outlets/insulation Wear shells/multiple inlets and outlets Conveying capacity for horizontal use: Conveying capacity for horizontal use: Screw diameter Material Class A 45 % Filling ratio Material Class B 30 % Filling ratio Material Class C 15 % Filling ratio Screw diameter Material Class A 90 % Filling ratio Material Class B 80 % Filling ratio Material Class C 60 % Filling ratio [mm] Qm [m 3 /h] Qm [m 3 /h] Qm [m 3 /h] o.r o.r o.r Material classes: A: Displacement resistance K=2 Material loose and free flowing, non-abrasive (cereals, flour, oil seeds, compound feed, coal dust, plastic dust, plastic granules, etc.) B: Displacement resistance K=3.5 Material not quite free-flowing, slightly abrasive, fine-grained to crushed or mixed (salt, sugar, gypsum, lime, sawdust, etc.) C: Displacement resistance K=5 Material flows poorly, very abrasive, viscous, fibrous or large particles (ash, coke, ore, cement, limestone, soda, etc.) [mm] Qm [m 3 /h] Qm [m 3 /h] Qm [m 3 /h] 100 o.r. o.r. o.r. 125 o.r. o.r. o.r o.r. o.r. o.r o.r. o.r. o.r. Material classes: A: Displacement resistance K=2 Material loose and free flowing, non-abrasive (cereals, flour, oil seeds, compound feed, coal dust, plastic B: Displacement resistance K=3.5 Material not quite free-flowing, slightly abrasive, fine-grained to crushed or mixed (salt, sugar, gypsum, lime, sawdust, etc.) C: Displacement resistance K=5 Material flows poorly, very abrasive, viscous, fibrous or large particles (ash, coke, ore, cement, limestone, soda, etc.) As the amount being conveyed increases, the conveyor output decreases. Centre bearing only useable up to max. 30% filling ratio. o.r. = on request As the amount being conveyed increases, the conveyor output decreases. o.r. = on request

6 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 7 Double Screw Conveyors DSF 100 to DSF 1400 Worm Heat Exchangers SWT 250 to SWT 800 S235JR (St37)/1.4301/ 1.

12000 mm depending on size Direct drive, chain drive or coupling drive Trough plate gauge: 2 mm to 10 mm, depending on size Direct drive, chain drive or coupling drive Inlet and outlet: Shape, size

to 800 mm (can be made to client s spec) Auger blade gauge: 2 mm to 12 mm, depending on size (or as per client s spec) Auger blade gauge: 2 mm to 12 mm, depending on size (or as per client s spec)

valve/blocking strip/rpm monitoring/custom paint/special materials/ Hard facing/rpm monitoring/heat exchange via screw tube, trough, flights possible/ Hard facing/wear shells/multiple inlets and

4 6 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 7 Double Screw Conveyors DSF 100 to DSF 1400 Worm Heat Exchangers SWT 250 to SWT 800 S235JR (St37)/1.4301/ S235JR (St37)/1.4301/1.4571/ Trough length: up to 8000 mm manufactured in one piece, without intermediate flange Trough shape: Pipe or U-trough Trough length: max mm up to max mm depending on size Direct drive, chain drive or coupling drive Trough plate gauge: 2 mm to 10 mm, depending on size Direct drive, chain drive or coupling drive Inlet and outlet: Shape, size and position variable Trough plate gauge: 2 mm to 10 mm, depending on size Stuffing box, Braided seal Stuffing box Screw diameter: 100 mm to 1400 mm (or as per client s spec) Screw diameter: 250 mm to 800 mm (can be made to client s spec) Auger blade gauge: 2 mm to 12 mm, depending on size (or as per client s spec) Auger blade gauge: 2 mm to 12 mm, depending on size (or as per client s spec) Protective sleeve/cleaning flap/trough foot/atex/scraping with 1 drive/centre bearing/ Protective sleeve/cleaning flap/trough foot/atex/custom paint/special materials/ Displacer/Overflow valve/blocking strip/rpm monitoring/custom paint/special materials/ Hard facing/rpm monitoring/heat exchange via screw tube, trough, flights possible/ Hard facing/wear shells/multiple inlets and outlets/insulation Coolant as per clients request Conveying capacity for horizontal use: Conveying capacity for horizontal use (tube-shaped trough): Screw diameter Material Class A 45 % Filling ratio Material Class B 30 % Filling ratio Material Class C 15 % Filling ratio Screw diameter Material Class A 90 % Filling ratio Material Class B 80 % Filling ratio Material Class C 60 % Filling ratio [mm] Qm [m 3 /h] Qm [m 3 /h] Qm [m 3 /h] o.r o.r o.r. o.r. 589 Material classes: A: Displacement resistance K=2 Material loose and free flowing, non-abrasive (cereals, flour, oil seeds, compound feed, coal dust, plastic B: Displacement resistance K=3.5 Material not quite free-flowing, slightly abrasive, fine-grained to crushed or mixed (salt, sugar, gypsum, lime, sawdust, etc.) C: Displacement resistance K=5 Material flows poorly, very abrasive, viscous, fibrous or large particles (ash, coke, ore, cement, limestone, soda, etc.) [mm] Qm [m 3 /h] Qm [m 3 /h] Qm [m 3 /h] 100 o.r. o.r. o.r. 125 o.r. o.r. o.r. 160 o.r. o.r. o.r. 200 o.r. o.r. o.r o.r. o.r. o.r o.r. o.r. o.r o.r. o.r. o.r. Material classes: A: Displacement resistance K=2 Material loose and free flowing, non-abrasive (cereals, flour, oil seeds, compound feed, coal dust, plastic B: Displacement resistance K=3.5 Material not quite free-flowing, slightly abrasive, fine-grained to crushed or mixed (salt, sugar, gypsum, lime, sawdust, etc.) C: Displacement resistance K=5 Material flows poorly, very abrasive, viscous, fibrous or large particles (ash, coke, ore, cement, limestone, soda, etc.) As the amount being conveyed increases, the conveyor output decreases. Centre bearing only useable up to max. 30% filling ratio. As the amount being conveyed increases, the conveyor output decreases. o.r. = on request

8 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 9 Vertical Screw Conveyors SRF 250 to SRF 1400 Troughed Belt Conveyors MGF 300 to MGF 2000 Design: Safety components: Framework

4301/vz Direct drive and coupling drive RPM monitoring/rope pull emergency stop/belt misalignment switch/safety guard Stable, flanged sheet metal construction/lower belt safety cover/plough scraper

5 8 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 9 Vertical Screw Conveyors SRF 250 to SRF 1400 Troughed Belt Conveyors MGF 300 to MGF 2000 Design: Safety components: Framework joints: horizontal/rising/concave/convex/reversible/movable S235JR (St37)/1.4301/vz Direct drive and coupling drive RPM monitoring/rope pull emergency stop/belt misalignment switch/safety guard Stable, flanged sheet metal construction/lower belt safety cover/plough scraper or Material guide: Tensioning station: diagonal scraper/centring station/guide station/side rollers with product guide rails and strip curtains Braided seal Spindle tensioning unit/weight-loaded rear clamping point with carriages/ S235JR (St37)/1.4301/ Weight-loaded central clamping point Vat: Half shells Drive station: Scraper systems/cleaning Brushes Power units: Direct drive, coupling (flat, spur, bevel gear units) Belt qualities: Approved for foodstuffs/heat and cold resistant/oil & grease resistant/with different Vat length: 2500 mm mm (in 200 mm steps) inlays/steel cord belts Vat plate thicknesses: 3 mm to 10 mm, depending on manufactured size ATEX/Discharge trolley/belt weighers/suspended magnet/de-dusting nozzle/ Intake and discharge: Variable in design, dimensions and position Protective covers (Organit, , aluminium, galv.)/special materials/custom paint/ Shaft seal: At bottom stuffing box, at top integrated in compact bearing unit Fully enclosed/level indicator Auger diameter: Auger blade thickness: 250 mm to 1400 mm (customer specifications possible) 2 mm to 12 mm, depending on manufactured size (customer specifications possible) Sleeve at bottom/cleaning flap/blocking strips/atex/special materials/ Custom paint/insulation Auger diameter (mm): Maximum conveying rate sq.m (m 3 /h)* Theoretical capacity in m 3 /h,, at a belt speed of v = 1 m/sec and 100% filling ratio: Belt width flat troughed 20 2-piece roller set troughed 20 3-piece roller set troughed 30 3-piece roller set [mm] Qm [m 3 /h] Qm [m 3 /h] Qm [m 3 /h] Qm [m 3 /h] o.r. o.r o.r o.r o.r o.r o.r o.r Correction factors for rising conveyors: Slope angle: Correction factor: * Dependent on product attributes The capacity can be adjusted by using profiled belts, cross-rib patterns, 5-piece roller garlands, modified troughing angles, higher sidebars and modified unprofiled edges. o.r. = on request

6 10 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 11 Chain Conveyors with single strand chain TKF 200 to TKF 1000 Drag chain conveyor with fork links KKF 400 to KKF 2000 Design: TKF horizontal rising/tkf L-shape/TKF Z-shape Design: KKF horizontal/kkf L-shape/KKF Z-shape S235JR (St37)/1.4301/ S235JR (St 37)/1.4301/ Spur gears, offset shaft gears, and bevel gears Direct drive, chain drive or coupling drive Direct drive, chain drive, and coupling drive Side wall gauges: 3 mm to 6 mm, depending on size Side wall gauges: 3 mm to 6 mm, depending on size Floor plate gauges: 4 mm to 8 mm, depending on size Floor plate gauges: 4 mm to 8 mm, depending on size Braided seal Braided seals Tensioning station: RPM monitoring/spring tensioning unit Tensioning station: RPM monitoring/spring tensioning unit Drive station: Inspection flaps/cleaning finger/level indicator Drive station: Inspection flaps/cleaning fingers/filling level indicator Chain pitches: t=142/t=260 Chain pitches: t=142v/t=260 ATEX/with self-propelled retractable tank/special carrier/chain breakage monitoring/ ATEX/self-propelled retractable tank/special carrier/chain breakage monitor/ Special materials/custom paint/other chains special materials/customized paint/other chains Horizontal Chain Conveyors: Conveyor output in m 3 /h (for ƍ =1 t/m 3 ) 100 % filling ratio Carrier width [mm] 0.1 m/sec 0.2 m/sec 0.3 m/sec 0.4 m/sec 0.5 m/sec Steep-angled Trough Chain Conveyors: Conveyor output in m 3 /h (for ƍ =1 t/m 3 ) 100 % filling ratio Carrier width [mm] 0.1 m/sec 0.2 m/sec 0.3 m/sec 0.4 m/sec 0.5 m/sec Horizontal drag chain conveyor: Conveyor output in m 3 /h (for ƍ =1 t/m 3 ) 100 % filling ratio Carrier width [mm] 0,1 m/sec 0,2 m/sec 0,3 m/sec 0,4 m/sec 0,5 m/sec , , , ,5 587,5 783, , Steep-angled drag chain conveyor: Conveyor output in m 3 /h (for ƍ =1 t/m 3 ) 100 % filling ratio Carrier width [mm] 0,1 m/sec 0,2 m/sec 0,3 m/sec 0,4 m/sec 0,5 m/sec ,5 90, , , Conveyor output m 3 /h (theor.) t=142v: The theoretical output is calculated from average trough cross-sections. They are determined in each case by product being conveyed and conveyor output. The real trough cross-section chosen depends on the characteristics of the material being conveyed. Conveyor output m 3 /h (theor.) t=142v: The theoretical output is calculated from the mean trough cross-sections. They depend on the conveyed product and the conveyor output. The actually selected trough cross-section depends on the properties of the conveyed product.

12 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 13 Drag chain conveyor with plate links KKF 400 to KKF 2200 Drag chain conveyor specifically for OSB plants KKF 800 to KKF

4571 Side wall materials: S235JR (St 37) Spur gears, offset shaft gears, and bevel gears Floor material: S235JR (St 37) /Hardox/plastic Direct drive, chain drive, and coupling drive Side wall gauges:

7 12 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 13 Drag chain conveyor with plate links KKF 400 to KKF 2200 Drag chain conveyor specifically for OSB plants KKF 800 to KKF 2200 with plate link chain Design: KKF horizontal/kkf L-shape/KKF Z-shape Design: horizontal/with max. 45 upward angle S235JR (St 37)/1.4301/ Side wall materials: S235JR (St 37) Spur gears, offset shaft gears, and bevel gears Floor material: S235JR (St 37) /Hardox/plastic Direct drive, chain drive, and coupling drive Side wall gauges: 6 mm and 8 mm Side wall gauges: 3 mm to 6 mm, depending on size Floor plate gauges: 8 mm and 10 mm Floor plate gauges: 4 mm to 8 mm, depending on size Top cover: 3 mm and 4 mm Braided seals Spur gears, offset shaft gears, and bevel gears Tensioning station: RPM monitoring/spring tensioning unit Direct drive, chain drive, and coupling drive Drive station: Inspection flaps/cleaning fingers/filling level indicator Braided seals Chain pitches: t=200 similar to DIN 8168 Tensioning station: RPM monitoring/spring tensioning unit ATEX/self-propelled retractable tank/special carrier/chain breakage monitor/ Drive station: Inspection flap/congestion flap special materials/customized paint/other chains Chain pitches: T= 200 similar to DIN 8165 Horizontal drag chain conveyor: Conveyor output in m 3 /h (for ƍ =1 t/m 3 ) 100 % filling ratio Carrier width [mm] 0,1 m/sec 0,2 m/sec 0,3 m/sec 0,4 m/sec 0,5 m/sec Steep-angled drag chain conveyor: Conveyor output in m 3 /h (for ƍ =1 t/m 3 ) 100 % filling ratio Carrier width [mm] 0,1 m/sec 0,2 m/sec 0,3 m/sec 0,4 m/sec 0,5 m/sec ATEX/take-up monitor/cleaning pan in the tensioning station KKF for dry OSB chips: Carrier spacing 800 mm No. of teeth Carrier width [mm] Conveyor output [m 3 /h] KKF for wet OSB chips: Carrier spacing 1200 mm Conveyor output m 3 /h (theor.) t=142v: The theoretical output is calculated from the mean trough cross-sections. They depend on the conveyed product and the conveyor output. The actually selected trough cross-section depends on the properties of the conveyed product. Conveyor output with v = 0,5 m/s and 100% filling ratio Max. outputs for drag chain conveyor with plate link chain for OSB plants.

14 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 15 Belt Bucket Elevators GBW 80 to GBW 1250 Chain bucket elevators with round link chains KBW 160 to KBW 1000 S235JR (St37)/1.

8 14 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 15 Belt Bucket Elevators GBW 80 to GBW 1250 Chain bucket elevators with round link chains KBW 160 to KBW 1000 S235JR (St37)/1.4301/ S235JR (St37)/1.4301/ Direct drive Direct drive Gauge of vertical section steel sheet: 2 mm (up to 19 m distance between centres) to 5 mm (up to 60 m distance between centres)* Gauge of vertical section steel sheet: 2 mm (up to 19 m distance between centres) to 5 mm (up to 60 m distance between centres)* Braided seal Braided seal Bucket elevator foot: Access doors/inspection flaps/movable inlet/bucket conveyor/rpm monitoring/ Bucket elevator foot: Access doors/inspection flaps/movable inlet/bucket conveyor/rpm monitoring/ Tensioning unit Tensioning unit Bucket elevator head: Inspection flaps/misalignment monitor/discharge plate adjustable Bucket elevator head: Inspection flaps/discharge plate adjustable Containers: DIN /DIN /DIN /DIN Containers: DIN /DIN /DIN /DIN Drive with spur gear motor and coupling/platform/atex design/rupture discs/ Drive with spur gear motor and coupling/platform/atex design/rupture discs/ Exhaustion/Level indicator/slip monitoring/special bucket/special housing/ Exhaustion/Level indicator/slip monitoring/special bucket/special housing/ Bucket conveyor with moving scoop/gravitational tensioning/separate backstop/ Bucket conveyor with moving scoop/gravitational tensioning/separate backstop/ Large heights on request Large heights on request Bucket shape medium deep DIN deep DIN Filling ratio Bucket width [mm] % Conveyor output [m 3 /h] at v = 1.3 m/sec 100 o.r. o.r. o.r o.r. 90 o.r. o.r. o.r o.r. 75 o.r. o.r. o.r o.r. 100 o.r. o.r. o.r o.r. o.r. o.r o.r. o.r. o.r max 90** o.r. o.r. o.r Bucket shape medium deep DIN deep DIN Filling ratio Bucket width [mm] % Conveyor output [m 3 /h] at v = 1.1 m/sec max 90** Conveyor output m 3 /h (theor.): The conveyor speed [v] and bucket spacing are assumed averages. They are determined in each case by product being conveyed and conveyor output. The actual bucket filling ratio to be chosen depends on the characteristics of the material being conveyed. o.r. = on request * Gauge depends on place of installation ** v=1.83 m/s, min. Bucket spacing Conveyor output m 3 /h (theor.): The conveyor speed [v] and bucket spacing are assumed averages. They are determined in each case by product being conveyed and conveyor output. The actual bucket filling ratio to be chosen depends on the characteristics of the material being conveyed. o.r. = on request * Gauge depends on place of installation ** v=1.3 m/s, min. Bucket spacing

16 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 17 Flat slide valve FLS EL 180 to FLS EL 1040 Electrical with offset shaft gears Flat slide valve FLS PNE 180 to FLS PNE 1040

EL 250 250x250 6 4 160 Tr 30x6 LH FLS EL 270 270x270 6 4 160 Tr 30x6 LH FLS EL 300 300x300 6 4 160 Tr 30x6 LH FLS EL 335 335x335 6 4 160 Tr 30x6 LH FLS EL 400 400x400 8 4 160 Tr 30x6 LH FLS EL 425

9 16 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 17 Flat slide valve FLS EL 180 to FLS EL 1040 Electrical with offset shaft gears Flat slide valve FLS PNE 180 to FLS PNE 1040 Flat slide valve, pneumatic Enclosure St37/Slide plate St37/Inlet hopper Dimensions: Name Slide valve size [W] Enclosure St37/Slide plate /Inlet hopper Enclosure /Slide plate /Inlet hopper Thickness of slide sheet [b] Thickness Enclosure [t] Height [h] Spindle [S] FLS EL x Tr 30x6 LH FLS EL x Tr 30x6 LH FLS EL x Tr 30x6 LH FLS EL x Tr 30x6 LH FLS EL x Tr 30x6 LH FLS EL x Tr 30x6 LH FLS EL x Tr 30x6 LH FLS EL x Tr 30x6 LH FLS EL x Tr 30x6 LH FLS EL x Tr 30x6 LH FLS EL x Tr 36x6 LH FLS EL x Tr 36x6 LH FLS EL x Tr 36x6 LH Motor FAZ27 DR63L4 P=0.25 kw n=188 with brake Construction type M5 FLS EL 600 FLS EL x x Tr 36x6 LH Tr 36x6 LH FAZ27 DRS71M4 FLS EL x Tr 40x7 LH P=0.55 kw n=200 FLS EL x Tr 40x7 LH with brake FLS EL 1000 FLS EL x x Tr 40x7 LH Tr 40x7 LH Construction type M5 Note: For slide valves under bunkers, silos, etc., motor output needs to be checked! ATEX - package, equipment for Zone 22 Surface finish: Drive options: End position switch: 2 proximity sensors Turck Ni12U-EM18-AP6X/3D Max. load on Slide plate 400 kg 800 kg DIN EN ISO according to Data Sheet C2 or C3, RAL 1015/5010/6011/7035/9001 satin gloss hand wheel, chain hoist Enclosure St37/Slide plate St37/Inlet hopper Dimensions: Name Slide valve size [W] Enclosure St37/Slide plate /Inlet hopper Enclosure /Slide plate /Inlet hopper Thickness of slide sheet [b] Thickness Enclosure [t] Height [h] Cylinder piston -ø/stroke [mm] FLS PNE x /170 FLS PNE x /190 FLS PNE x /210 FLS PNE x /240 FLS PNE x /260 FLS PNE x /290 FLS PNE x /320 FLS PNE x /340 FLS PNE x /390 FLS PNE x /410 FLS PNE x /440 FLS PNE x /490 FLS PNE x /510 FLS PNE x /540 FLS PNE x /590 FLS PNE x /650 FLS PNE x /790 FLS PNE x /820 FLS PNE x /990 FLS PNE x /1030 Note: For slide valves under bunkers, silos, etc., motor output needs to be checked! ATEX - package, equipment for Zone 22 Surface finish: Position detectors: 2 proximity sensors Turck Ni12U-EM18-AP6X/3D Max. load on Slide plate 300 kg 700 kg 1100 kg DIN EN ISO according to Data Sheet C2 or C3, RAL 1015/5010/6011/7035/9001 satin gloss

18 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT

KGB 150 m³ up to KGB 600 m³ Diverter flap WSK

Inside width: Inside height: 3300 mm useful

rollers/separately powered cleaning brush

Pneumatic, electric, manual Miscellaneous:

roller type in split pillow blocks/rear wall

designed as a door, so that reverse operation

Side wall gauges: 6 mm and 8 mm batching with

(adapted to AMF conveyor systems), sizes up

possible without problems Features: Modular,

50 m (module length 1950 mm) Length can be

flap Stripper rollers with side deflectors

conveyed towards the middle; a sawtooth blade

10 18 PRODUCT OVERVIEW: CONVEYOR SYSTEMS PRODUCT OVERVIEW: CONVEYOR SYSTEMS 19 Chain conveyor KGB 150 m³ up to KGB 600 m³ Diverter flap WSK 180 to WSK 1450 Pneumatic, electric, manual Inside width: Inside height: 3300 mm useful 3650 mm Individually powered stripper rollers/separately powered cleaning brush Volume: from 150 m 3 up to 600 m 3 Versions: 2-way and 3-way version/symmetric and asymmetric Conveyor output: 600 m 3 per hour Pneumatic, electric, manual Miscellaneous: All bearings are heavy-duty FAG/SKF floating roller type in split pillow blocks/rear wall Exit angle: Standard 30, others possible designed as a door, so that reverse operation for emergency emptying is possible/precise Side wall gauges: 6 mm and 8 mm batching with frequency-controlled conveyor chain drive/filling level sensors on request Standard sizes: 180 x 180 up to 1450 x 1450 (adapted to AMF conveyor systems), sizes up to 2000 x 2000 Insulated side walls and roof possible without problems Features: Modular, bolted construction permits any lengths up to 50 m (module length 1950 mm) Length can be changed subsequently/simple installation on site The entire bunker roof is walkable Pneumatic diverter flap Electric diverter flap Stripper rollers with side deflectors relieve the seal the material is always conveyed towards the middle; a sawtooth blade is not necessary Chain conveyor belt with bolted rubber plates permits assembly/disassembly in segments/ repair of individual rubber plates is possible, i.e. there is no need to replace the entire belt Manual diverter flap 2-way asymmetric diverter flap 2-way symmetric diverter flap 3-way symmetric diverter flap Stripper rollers above the discharge zone Distributing chain conveyor Chain conveyor segment

11 AMF BRUNS PRODUCTS LEAVE OUR WORKS IN APEN EVERY DAY FOR DESTINATIONS ALL OVER THE WORLD

PRODUKTÜBERSICHT FÖRDERANLAGEN 23 DISCOVER THE AMF-BRUNS SERVICE WORLD! Reliable and powerful technology is a prerequisite for economic and efficient production.

12 PRODUKTÜBERSICHT FÖRDERANLAGEN 23 DISCOVER THE AMF-BRUNS SERVICE WORLD! Reliable and powerful technology is a prerequisite for economic and efficient production. So that you can rely on your plant at any time, we deliver not only first-class technology, but also a tailor-made service portfolio. Because we want you to focus on essentials and be able to exploit the potential of your plant to the full. This includes professional installation and personal instruction for your staff, but also an efficient maintenance and servicing plan. For further questions about our services, we are at your disposal at any time - get in touch with us! WE ARE ALWAYS WITHIN EASY REACH With AMF-Bruns, you are putting your trust in a partner who is always at your side to ensure long-term, safe plant operation. Take advantage of the expertise and experience of our staff. On your behalf, they watch out for quality, ensure fast order processing and keep your budget in mind at all times. So you always get the best solution from us - safe, sustainable and economical. FIRST-CLASS SERVICE RIGHT FROM THE START Our aim is your satisfaction: it starts with planning but does not stop after commissioning. That s why we are constantly giving our employees technical training, to be able to provide you with optimum service in any situation. By ensuring professional installation and commissioning, our chief erectors, fitters and engineers ensure optimal settings of your machinery and after that are always available for advice and practical help - for instance in matters of plant optimization and maintenance. SPARE PARTS AND MAINTENANCE By using AMF-Bruns original parts you are always at the cutting edge of technology. Our special maintenance packages also ensure a high level of operational readiness of your plant. AMF Bruns maintains its own stock of spare parts - this way we can guarantee constant availability and speedy delivery, and remedy almost any technical problem without losing a great deal of time. It goes without saying that you have the full manufacturer s warranty on all our replacement parts. We will be pleased to advise you! SERVICE HOTLINE: + 49 (0) More information is available at or send us an service@amf-bruns.de AMF-BRUNS SERVICE WORLD FIRST CLASS ALSO FOR SERVICE

13 Zertifiziertes Management-System DIN EN ISO 9001 Reg. Nr.: Q AMF-Bruns GmbH & Co. KG Hauptstraße Apen Germany Edition 04/2017

TROUGH SCREW CONVEYORS

TROUGH SCREW CONVEYORS 1 TROUGH SCREW CONVEYORS for (TSF) with offset shaft gears www.amf-bruns.com TROUGH SCREW CONVEYORS 3 Contents Overview of TSF 100 DS FA TSF 125 DS FA TSF 160 DS FA TSF 200 DS FA