VALID FROM PRICES IN SEK AND SUBJECT TO VAT VERS 2018:2 PRICE LIST 2018/2019 I-LINE

Transcription

1 VALID FROM PRICES IN AND SUBJECT TO VAT VERS 08: PRICE LIST 08/0 I-LINE

2

3 Which line suits your plant? We have specialized in designing and manufacturing innovative handling lines to take care of the grain through all steps, from the smallest farm to the agri industry. We offer three different handling lines to make it easier to find a complete solution for every project. All lines are uniquely designed to meet different needs. I-LINE The products in the I-line are designed for applications with a need for regularly use throughout the year. The line suits the requirements within large farms and commercial grain stores. CAPACITY 0 t/h 40 t/h 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h 00 t/h 00 t/h 00 t/h STORAGE SIZE USAGE 000 t t t Heavy during the harvesting period Regurarly during all seasons Daily and continuous These recommendations are to be used as a guide and not exact figures. Variation may occur in individual cases as these suggestions are based on wheat. Do not hesitate to contact us if your application has other requirements. We have a wide experience of custom made solutions.

4 A complete system of handling equipment Belt conveyor BTI Belt & Bucket Elevator SEI Inclined top conveyor KTIA DC Remover (Dust & Chaff) Top conveyor KTIB KTIF KTIF/FR Ducting system Sweep Conveyor KTIS Trench intake conveyor KTIG KTIFg Bottom conveyor KTIFb KTIBU Every line is a complete system of bottom conveyors, elevators and top conveyors - all designed for specific positions in the plant. Since the products within every line work together as a system, they are matched to attain maximal flow and avoid stops in operation. All lines are manufactured in galvanized steel to be proof against outdoor conditions. I ENG

5 Belt & Bucket Elevator Belt & Bucket Elevator SEI /4 Belt & Bucket Elevator SEI 0/8 Belt & Bucket Elevator SEI 0/ 0 Chain & Flight Conveyors Top conveyor KTIF 4 Flow/return conveyor KTIF/FR 8 Bottom conveyor KTIFb Trench intake conveyor KTIFg Inclined top conveyor KTIA Curved top conveyor KTIB 0 4 Curved bottom conveyor KTIBU 8 Curved trench intake conveyor KTIG Sweep Conveyor KTIS Belt Conveyor BTI DC Remover (Dust & Chaff) Cut off slide Ducting system Technical specification Motors ATEX information 0 4 I ENG

6 Belt and bucket elevator SEI /4 40 & 0 t/h 0 t/h 4 b Description SEI /4 is manufactured from galvanized material in accordance with the EU Machinery Directives. It is available in three models: 0, 40 and 0. The different models give the following capacities based on grain with % moisture content, bulk density 70kg/m, at below specified nominal shaft rpm. Remember that every % increase in moisture content above %, decreases capacity by -4%. The capacity is affected with the same percentage as the gear box revolution (SK8-7) changes. Type Capacity t/h Capacity m /h Belt speed m/s... Buckets/m Nom. shaft rpm Price includes Elevator head () with removable hood (). Transformer sq included for 0 t/h. Extra wear plates in elevator hood and outlet. Back stop () mounted on the drive shaft. Slatted self cleaning belt pulleys in both elevator head and elevator boot. Nord direct mounted gear box (4) with motor IP. 0/400 volt (.-.0 kw) resp. 400/0 volt (from 4.0 kw) 0 Hz. Elevator boot () with belt tension device and two flanged inlets. Cleaning out hatch (7) in side. Cover plate for one inlet. (Inlet regulator with rod as an extra accessory.) Legs in different lengths. One leg is supplied with a removable service door. Standard leg casing. mm. ( mm leg casing at extra cost.) Antistatic elevator belt EP 0/ (0) as standard. (Oil-, greaseand temperature- resistant belt at extra cost.) Steel elevator buckets type Starco 40 (). Shaft speed monitor (). Further dimensions available on CAD-files. We reserve the right to change dimensions and specifications. I ENG

7 Price SEI /4 Totalprice Model Code Height m 0 t/h 40 t/h 0 t/h SEI /4 SEI /4 SEI / gear box gear box gear box SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK Part prices No Code Description 0070 Elevator head SK8, Ø0, Sq Elevator head SK8, Ø, Sq Elevator head SK8, Ø40, Sq b 0 Transformer sq for 0 t/h Elevator hood KULAS0 Back stop Elevator boot Elevator belt 0 mm 0 77 EP 00/.8 buckets/m 0 t/h EP 00/. buckets/m 40 t/h EP 00/ 8.4 buckets/m 0 t/h 0 4 Steel buckets Starco 77 Belt screw M7x, nut and washer,80 00 Speed monitor 8 8 0ES000 Belt tensioner B=0 mm for belt joint 70 Elevator legs t=, mm 40 Elevator leg 0. m Elevator leg 0.0 m 407 Elevator leg 0.7 m 400 Elevator leg.00 m Elevator leg.00 m 7 Elevator legs t=,0 mm 8 0 Elevator leg.0 m c/w dbl service door 40 Hardware for one pair of legs (. mm) 8 Base assembly pack Max height m 0 m m Extra cost to above prices for extension of: Accessories No Code Description No Code Description Safety equipment for ATEX - more information on p Exp.panel mount. in asp. hood - extra cost Exp.panel mount. in leg - extra cost 7 Indicator Exp.panel II D 480 First pair of panels placed directly above the boot in each leg, a new pair every sixth meter and one panel at the hood. 04 Belt alignment, inductive in elevator leg 0, m. Mount on down going leg side Motor weather cover SK Motor weather cover SK Transformer sq 80 - flange Top hood c/w RK0 aspiration port Extra cost Seed boot options Seed boot c/w belt tensioning, raised feet and bottom clean out hatch* - extra cost *Safety switch included 7 XXX Elevator legs t=,0 mm 4 Extra cost/m elevator 40 Hardware for one pair of legs ( mm) 8 Oil resistant belt 0 mm 87 EP 00/.8 buckets/m 0 t/h EP 00/. buckets/m 40 t/h 0 8 EP 00/ 8.4 buckets/m 0 t/h Extra cost/m elevator Cleaning brush* 47 * per every 0 meter belt. Included as standard for machines 0 m and above. I ENG

8 Feeding SEI / b To obtain best capacity and avoid run-stop when feeding grain with moisture contents of 0-%, it is important the elevator is fed correctly. Note: Inlet hoppers can be fitted in different heights (A and B) at the elevator boot. Note: Inlet hopper 80U should be in position (B) to get adequate flow of grain into the elevator boot. When feeding an elevator from a KTBU Conveyor on the down going legside, use inlet 40R fitted in position (A). When installing SEI /4 in a gravity feed elevator pit, use connection duct 800 (). Always connect the reception pit to the upgoing legside. The feed hole in the partition between the reception part and the pit tower must be W0xH00. Always use control side. Inlet slides (, & 7) must be used on both upgoing and down going leg side unless the feed is from a Skandia C&F Conveyor, KTIG, KTIFb or KTIBU. 4 I ENG

9 Price accessories SEI / Accessories No Code Description No Code Description 04 Service platform incl.. m ladder 887 mm drums must be selected for elevators that shall be equipped with service platform. b 0 Double platform, extension 87 0 Rest Platform 4 Ladder & safety hoops m Inlet reg. with. m rod Rod extension.0 m 4 40 Rack & pinion controlled slide Rod extension.0 m for R&P control slide Motor controlled slide Outlet/connection KTIG 0/40 & KTIBU 0/ Connection hopper Con. hop c/w overload sensor /4 44 Feeding through inlet hopper, upgoing leg side Inlet hopper 80U std 4 88 Inlet hopper 80U left hand Inlet hopper 80U right hand 4 Feeding through inlet hopper, down going leg side 840 Inlet hopper 40R std 7 84 Inlet hopper 40R left hand 4 84 Inlet hopper 40R right hand 4 4 Blank cover plate 7 4 inlets RK0 incl. plast. plugs inlets FK00 incl. plast. plugs Connection duct 00/ inlet RK00 for connecting hopper 47 I ENG

10 Belt and bucket elevator SEI 0/8 80 & 00 t/h 0 t/h 4 8 b Description SEI 0/8 is manufactured from galvanized material in accordance with the EU machinery directives. SEI 0/8 is Category II D/OD elevator and comply with the European ATEX directive 4/EC. It is suitable for most material to be handled in a drying and storage plant. It is available in three models: 0, 80 & 00. The different models give the following capacities based on grain with % moisture content, bulk density 70kg/m, fed on upgoing side and at below specified nominal shaft rpm. Remember that every % increase in moisture content above %, decreases capacity by -4%. The capacity is affected with the same percentage as the gear box revolution (SK8-0) changes. Type Capacity t/h 7 0 Capacity m /h 8 4 Belt speed m/s... Buckets/m Nom. shaft rpm Price includes () Elevator head with removable () hood. Transformer sq 0-80 included for 0 t/h. Extra wear plates in elevator hood and outlet. () Back stop mounted on the drive shaft.slatted self cleaning belt pulleys in both elevator head and elevator boot. (4) Nord direct mounted gear box with motor IP. 0/400 volt (.-.0 kw) resp. 400/0 volt (from 4.0 kw) 0 Hz. () Elevator boot c/w belt tensioning and with two flanged inlets. Cover plate for one inlet. (7) Cleaning out hatch in side. (4) Shaft speed monitor. (Inlet regulator with rod as an extra accessory.) Legs in different lengths. (8) One leg is supplied with a removable service door. Standard leg casing.0mm. ( mm leg casing at extra cost.) () Antistatic elevator belt EP 0/4 as standard. (Oil-, greaseand temperature- resistant belt at extra cost.) () Steel elevator buckets type Starco 80. Further dimensions available on CAD-files. We reserve the right to change dimensions and specifications. I ENG

11 Price SEI 0/8 Model Code Height m 0 t/h gear box 80 t/h 00 t/h Totalprice SEI 0/8 SEI 0/8 SEI 0/ gear box gear box SK8 8 SK SK SK SK8 4 7 SK SK SK SK SK SK SK8 7 77, SK , , SK SK48 80 SK , SK , SK , SK Part prices No Code Description 080 Elevator head SK8 D0mm Elevator head SK8 Dmm Elevator head SK8 D40mm 0 00 Elevator head SK48 D0mm 4 00 Elevator head SK8 D0mm b Transformer sq 0-80 for 0 t/h Elevator hood 47 KULAS40 Backstop Ø40 mm Elevator boot Speed monitor 8 Elevator belt 00 mm 78 EP 0/.4 buckets/m 0 t/h 7 EP 0/ 7. buckets/m 80 t/h 7 7 EP 0/.0 buckets/m 00 t/h 74 8 Steel buckets Starco 80 mm 8 77 Belt screw M7x, nut and washer,80 0 0ES00 Belt tensioner 8 Elevator legs t=.mm 40 Elevator leg 0. m Elevator leg 0.0 m Elevator leg 0.7 m 400 Elevator leg.00 m Elevator leg.00 m 4 Elevator legs t=,0 mm 8 0 Elevator leg.00 m c/w dbl serv. door Hardware for one pair of legs 8 0 Base assembly pack SEH 0/ Max height m 0 m m Extra cost to above prices for extension of: Accessories No Code Description No Code Description Safety equipment for ATEX - more information on p Exp.panel mount. in asp. hood - extra cost Exp.panel mount. in leg - extra cost 4 7 Indicator Exp.panel II D 480 First pair of panels placed directly above the boot in each leg, a new pair every sixth meter and one panel at the hood Belt alignment, inductive in elevator leg 0, m. Mount on down going leg side. 8 Motor weather cover SK Motor weather cover SK8 0 0 Motor weather cover SK Aspiration conn. in elevator hood - extra cost 4 Seed boot options 004 Seed boot c/w belt tensioning, raised feet and bottom 4 clean out hatch* - extra cost REM08 Rubber spacer washer,0 *Safety switch included XXX Elevator legs t=.0 mm 8 Extra cost/m elevator 40 Hardware for one pair of legs ( mm) 8 Oil resistant belt 00 mm 88 EP 0/.4 buckets/m 0 t/h 8 EP 0/ 7. buckets/m 80 t/h 0 8 EP 0/.0 buckets/m 00 t/h Extra cost/m elevator 4400 Cleaning brush* 478 per every 0 meter belt. Included as standard for machines 0 m and above. I ENG 7

12 Feeding SEI 0/8 0 b To obtain best capacity and avoid run-stop when feeding grain with moisture contents of 0-%, it is important the elevator is fed correctly. Note: The inlet hoppers can be fitted in different heights (A, B och C) at the elevator boot inlet. The feed can be either through connection hopper 80 (4) or inlet hopper 80U. Note: Inlet hopper 80U should be in position (B) to get adequate flow of grain into the elevator boot. When feeding an elevator from a KTIBU Conveyor on the downgoing leg side, use inlet 40R fitted in position (A). When installing SEI 0/8-0/80 in a gravity feed elevator pit, use connection duct 00/48 (8). For SEI 0/8-00 use connection duct 0/48 (). Always connect the reception pit to the upgoing leg side. The feed hole in the partition between the reception pit and connection duct should be W0xH00 for SEI 0/8-0/80 and W0xH70 for SEI /8M-00. Always use control slide. 8 I ENG

13 Price accessories SEI 0/8 4 A 7 B Accessories No Code Description No Code Description 00 Service platform incl.. m ladder 8 mm drums must be selected for elevators that shall be equipped with service platform. b 0 Double platform, extension 7 0 Rest Platform 0 Ladder & safety hoops m Inlet reg. with. m rod Rod extension.0 m 7 4 Rack & pinion controlled slide 7 47 Rod extension m R&P slide Motor controlled slide Outlet/connection 0/8 0 t/h Outlet/connection 0/8 80 t/h Outlet/connection 0/8 00 t/h 7 A 8 Connection hopper 0/8 7 B 08 Con. hop. c/w overload sensor 0/ inlet RK00 for connecting hopper inlet RK0 for connecting hopper Feeding through inlet hopper, upgoing leg side Inlet hopper 80U std 4 88 Inlet hopper 80U left hand Inlet hopper 80U right hand 4 Feeding through inlet hopper, down going leg side 840 Inlet hopper 40R std 7 84 Inlet hopper 40R left hand 4 84 Inlet hopper 40R right hand 4 4 Blank cover plate 7 4 inlets FK00 incl. plast. plugs inlets FK0 incl. plast. plugs Connection duct 00/ Connection duct 0A/48 I ENG

14 Belt and bucket elevator SEI 0/ 0 & 0 t/h 00 t/h 4 b Description SEI 0/ is manufactured from galvanized material in accordance with the EU machinery directives. It is available in three models: 00, 0 and 0. The different models give the following capacities based on grain with % moisture content, bulk density 70 kg/m, fed on upgoing side and at below specified nominal shaft rpm. Remember that every % increase in moisture content above %, decreases capacity by -4%. SEI 0/ is as standard a Category II D/OD Elevator and complies with the European ATEX directive 4/EC. It is suitable for most material to be handled in a drying and storage plant. The capacity is affected with the same percentage as the gear box revolution (SK8-) changes. Type Capacity t/h 4 8 Capacity m /h 4 78 Belt speed m/s... Buckets/m Nom. shaft rpm Price includes Elevator head () with removable hood (). Transformer sq 00-0 included for 00 t/h. Extra wear plates in elevator hood and outlet. Back stop () mounted on the drive shaft. Slatted self cleaning belt pulleys in both elevator head and elevator boot. Nord direct mounted gear box (4) with motor IP. 0/400 volt (.-.0 kw) resp. 400/0 volt (from 4.0 kw) 0 Hz. Elevator boot () c/w belt tensioning and two flanged inlets. Cover plate for one inlet. Cleaning out hatch in side (). Shaft speed monitor (7). (Inlet regulator with rod as an extra accessory). Legs in different lengths. (8) One leg is supplied with a removable service door. (0) ( mm leg casing at extra cost). Antistatic elevator belt EP 0/4 as standard. (Oil-, grease- and temperature- resistant belt at extra cost.) () Belt tensioner for mounting in belt joint. Steel elevator buckets type Starco 0. Further dimensions available on CAD-files We reserve the right to change dimensions and specifications. 0 I ENG

15 Price SEI 0/ Model Code Height m 00 t/h gear box 0 t/h 0 t/h Totalprice SEI 0/ 000- SEI 0/ SEI 0/ gear box gear box SK8 4 0 SK SK SK SK SK SK SK8 7 4, SK SK , 40 07, SK48 0 SK , , SK48 0 7, SK SK ,0 78 7, SK48 4 SK , SK , SK , 4 4 7, SK SK Part prices No Code Description 080 Elevator head SK8 Ø0mm Elevator head SK8 Ømm Elevator head SK8 Ø40mm Elevator head SK48 Ø0mm 0 00 Elevator head SK8 Ø0mm 4 b 0 Transformer sq00-0 for 00 t/h 00 Elevator hood 7 KULAS40 Backstop Ø40 mm 7 KULAS0B Backstop Ø0 mm Elevator boot Speed monitor 8 Elevator belt 0 mm 74 EP 0/4. buckets/m 00 t/h 0 74 EP 0/4. buckets/m 0 t/h 748 EP 0/4 7.8 buckets/m 0 t/h Steel buckets Starco 0 mm 0 70 Belt screw M0x0, nut and washer,0 Elevator legs t=, mm 40 Elevator leg 0. m Elevator leg 0.0 m Elevator leg 0.7 m Elevator leg.00 m 400 Elevator leg.00 m 4 Elevator legs t=,0 mm 8 0 Elevator leg.00 m c/w dbl serv. door Hardware for one pair of legs 8 Base assembly pack SEI 0/ Max height m m m Extra cost to above prices for extensions of: Accessories No Code Description No Code Description Safety equipment for ATEX - more information on p Exp.panel mount. in asp. hood - extra cost Exp.panel mount. in leg - extra cost 4 7 Indicator Exp.panel II D 480 First pair of panels placed directly above the boot in each leg, a new pair every sixth meter and one panel at the hood Belt alignment, inductive in elevator leg 0, m, Mount on down going leg side. 8 Motor weather cover SK Motor weather cover SK8 0 0 Motor weather cover SK Aspiration conn. in elevator hood - extra cost 4 Seed boot options 004 Seed boot c/w belt tensioning, raised feet and bottom clean out hatch* - extra cost *Safety switch included 7 XXX Elevator leg.00 m t=.0 mm 4 Extra cost/m elevator 40 Hardware for one pair of legs ( mm) 8 Oil resistant belt 0 mm 84 EP 0/4. buckets/m 00 t/h EP 0/4. buckets/m 0 t/h EP 0/4 7.8 buckets/m 0 t/h Extra cost/m elevator 4400 Cleaning brush* 7 per every 0 meter belt. Included as standard for machines 0 m and above. I ENG

16 Feeding SEI 0/ 0 b The inlet hopper 0/U should be used on the upgoing leg side and inlet hopper 0/R on down going leg side. Inlet slides (, & 7) must be used on both upgoing and down going leg side unless the feed is from a Skandia C&F Conveyor KTIG, KTIFb or KTIBU. To obtain best capacity and avoid run-stop when feeding grain with moisture contents of 0-%, it is important the elevator is fed correctly. We recommend feeding on upgoing leg side in combination with inlet hoppers and connection ducts. The opening in the partition between the reception part and the pit tower must be W00xH70. See next page. Powder and light material with density weight below 400 kg/m always has to be fed on down going leg side. I ENG

17 Price accessories SEI 0/ Accessories No Code Description No Code Description 0 Service platform incl.. m ladder mm drums must be selected for elevators that shall be equipped with service platform. b 0 Double platform, extension Rest Platform Ladder & safety hoops m 4 40 Inlet reg. with. m rod Inlet rod extension.0 m 480 Rack & pinion controlled slide Rod extension.0 m R&P slide Motor controlled slide Outlet/conn. 0/ 00-0 t/h 7 8 Connection hopper 0/ Con. hop. c/w overload sensor 0/ 4 80 Connection duct 0A t=mm 4 Feeding through inlet hopper, up going leg side 8 80 Inlet hopper 0/U std 8 8 Inlet hopper 0/U left hand Inlet hopper 0/U right hand 870 Feeding through inlet hopper, down going leg side 8 Inlet hopper 0/R std 4 8 Inlet hopper 0/R left hand Inlet hopper 0/R right hand 8 4 Blank cover plate for 0/U & 0/R 70 4 inlets FK0 incl. plast. plugs inlets FK00 incl. plast. plugs inlet RK0 for connecting hopper I ENG

18 Top conveyor KTIF 0/ = 40 0/ = 0 40/ = B A 0/ = 0 0/ = 0 40/ = 0 8 C A 0 C B A C D A/B 80 Description KTIF is manufactured from galvanized material in accordance with the EU machinery directives. KTIF is classified as a Category II D/ OD Conveyor and is suitable to handle granulated and pulverized materials as comply with Zone or Zone and where the external atmosphere is unclassified. Capacities KTIF horizontal top conveyor is designed to be fed from an SEI Bucket Elevator. Rated capacities are based on grain with % moisture and bulk density of 70kg/m³. The capacity will be affected with the same percentage as the gear box revolution changes. Price includes () Drive unit.0 m with pop up overload flap c/w micro switch () in top cover. Support frame () is included for all gear box sizes. (4) Nord direct mounted gear box with electric motor IP, 0/400 volt (.-.0 kw) resp. 400/0 volt (4.0- kw) 0 Hz. () Tail section.0 m with chain tensioner and cleaning out hatch. () Intermediate sections for the required conveyor lenght. Drive unit, tail section and intermediate sections are manufactured from galvanized material and have steel bottom t=. mm. Conveyor chain M80A-00 (breaking strain 80 kn) with plastic flights on steel flights. Cleaning flight every fourth metre chain. Type Capacity t/h 4 4 Capacity m /h 4 8 Chain speed m/s 0,4 0, 0, 0, 0,0 0,8 Nom. drive shaft rpm Conveyor return chain runs on plastic rolls (8) mounted 000 mm centres. () Inlet hopper for tail section and outlet hopper for drive unit. Further dimensions available on CAD-files We reserve the right to change dimensions and specification. 4 I ENG

19 Totalprice Model Code Length m 40 t/h 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h KTIF 0/ KTIF 0/ KTIF 0/ gear box KTIF 0/ KTIF 40/ KTIF 40/ 0- gear box gear box gear box gear box gear box SK8 SK8 4 SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK8 4 SK SK SK SK SK SK SK SK SK48 SK SK SK SK SK SK SK48 SK8 4 SK SK SK SK SK Max length 8 m 7 m 77 m m m m Extra cost above prices for extension with sections c/w chain: Price KTIF Part prices 40 & 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h No Description Code Code Code Code Code Drive unit KTIF m SK8 Ø mm M Drive unit KTIF m SK8 Ø40 mm M Drive unit KTIF m SK48 Ø0 mm M Drive unit KTIF m SK8 Ø0 mm M Drive unit KTIF m SK8 Ø70 mm M Tail unit m Ø40 mm Tail unit m Ø0 mm Chain m KTIF M80A Chain m KTIF M80A Chain 4 m KTIF M80A Interm. section 0. m Interm. section.0 m Interm. section.4 m Interm. section.0 m I ENG

20 Accessories KTIF 0/ = 40 0/ = 0 40/ = B A 0/ = 0 0/ = 0 40/ = 0 8 C A 0 C B A C D A/B 80 Accessories 40 & 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h No Description Code Code Code Code Code Motor weather cover SK Motor weather cover SK In/outlet hopper Transverse outlet slide A Remote controlled Remote controlled c/w pos. indicator C Weather cover rem.contr.int. outlet Motor controlled, c/w pos. indicator * Electro-pneumatic c/w pos. indicator * B Brush gear for interm. outlet Inline outlet slide intermediate section A Remote controlled Remote controlled c/w pos. indicator Motor controlled, c/w pos. indicator * Electro-pneumatic c/w pos. indicator * C Slide-controlled brush D Weight controlled brush Inline outlet slide drive end B Remote controlled Remote controlled c/w pos. indicator Motor controlled, c/w pos. indicator * Electro-pneumatic c/w pos. indicator * * Outlet slide incl. guard & weather cover Chain c/w cleaning buckets - extra cost/m conveyor: Return roll c/w shaft for M80A chain TT04 TT704 7 TT704 7 TT TT Plastic flight PMKTIF0 8 PMKTIF0 PMKTIF0 PMKTIF40 PMKTIF40 Chain speed monitor Pop up overload flap in tail end insp.windows, Interm. section I ENG

21 KTIF 0 0/ = 0 0/ = 0 40/ = 0 m Max m Accessories 40 & 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h No Description Code Code Code Code Code Wire support m Adaptor, height 84 mm Adaptor, adjustable Intersecting connection I ENG 7

22 Flow/return conveyor KTIF FR 0 0/ = 40 0/ = 0 40/ = / = 0 0/ = 0 40/ = 0 Description KTIF FR is manufactured from galvanized material in accordance with the EU Machinery Directives. KTIF FR is classified as a Category II D/OD Conveyor and is suitable to handle granulated and pulverized materials as comply with Zone or Zone and where the external atmosphere is unclassified. Capacities KTIF FR flow/return conveyor is designed to be fed from an SEI Bucket Elevator. Rated capacities are based on grain with % moisture content and bulk density of 70kg/m³. The capacity will be affected with the same percentage as the gear box revolution changes. Type Capacity t/h 4 4 Capacity m /h 4 8 Chain speed m/s 0,4 0, 0, 0, 0,0 0,8 Nom. drive shaft rpm Price includes () Drive unit.0 m with () pop up overload flap c/w micro switch top cover. Support frame () is included for all gear box sizes. (4) Nord direct mounted gear box with electric motor IP, 0/400 volt (.-.0 kw) resp. 400/0 volt (from 4.0 kw) 0 Hz. () Tail section.0 m with chain tensioner and cleaning out hatch. () Variable intermediate sections with intermediate floor for flow/ return conveying. Drive unit, tail section and intermediate sections are manufactured from galvanized material and have steel bottom t=. mm. Conveyor chain M80A-00 (breaking strain 80 kn) with plastic flights on steel flights. Cleaning flight every fourth metre chain. Conveyor return chain runs on plastic guides. () in-/outlet hoppers Further dimensions available on CAD-files We reserve the right to change dimensions and specification. 8 I ENG

23 Totalprice Model Code Length m 40 t/h 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h KTIF FR 0/ KTIF FR 0/ KTIF FR 0/ gear box SK SK SK48 0 SK8 4 SK SK SK SK SK SK SK SK SK SK SK SK SK8 0 SK8 4 SK SK SK SK SK SK SK SK SK SK48 74 SK8 4 7 SK SK SK SK SK SK SK SK SK SK SK KTIF FR 0/ KTIF FR 40/ Price KTIF FR KTIF FR 40/ 0- gear box gear box gear box gear box gear box Max length 48 m m 4 m m 7 m 7 m Extra cost to above prices for extension with sections c/w chain: Part prices 40 & 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h No Description Code Code Code Code Code Drive unit KTIF m SK8 Ø mm M Drive unit KTIF m SK8 Ø40 mm M Drive unit KTIF m SK48 Ø0 mm M Drive unit KTIF m SK8 Ø0 mm M Drive unit KTIF m SK8 Ø70 mm M Tail unit m Ø40 mm Tail unit m Ø0 mm Chain m KTIF M80A Chain m KTIF M80A Chain 4 m KTIF M80A Interm. section KTIF FR 0. m Interm. section KTIF FR.0 m Interm. section KTIF FR.4 m Interm. section KTIF FR.0 m Assembly pack KTIF FR I ENG

24 Accessories KTIF FR 0 0/ = 40 0/ = 0 40/ = / = 0 0/ = 0 40/ = 0 Accessories No Description 40 & 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h Code Code Code Code Code Motor weather cover SK Motor weather cover SK Transverse outlet slide 0 Remote controlled Remote controlled c/w pos. indicator Weather cover rem.contr.int. outlet Brush can not be used 0 Motor controlled, c/w pos. indicator * Electro-pneumatic c/w pos. indicator * In/outlet hopper * Outlet slide incl. guard & weather cover Plastic flight PMKTIF0 8 PMKTIF0 PMKTIF0 PMKTIF40 PMKTIF40 insp.windows, Interm. section Adaptor, height 84 mm Adaptor, adjustable Chain speed monitor I ENG

25 KTIF FR Notes I ENG

26 Bottom conveyor KTIFb Description KTIFb is manufactured from galvanized material in accordance with the EU Machinery Directives. KTIFb is classified as a Category II D/OD Conveyor and is suitable to handle granulated and pulverized materials as comply with Zone or Zone and where the external atmosphere is unclassified. Capacities KTIFb horizontal discharge conveyor is designed to feed a Skandia SEI Bucket Elevator. Rated capacities are based on grain with % moisture content and bulk density of 70kg/m³. The capacity will be affected with the same percentage as the gear box revolution changes. Type Capacity t/h Capacity m /h Chain speed m/s 0,4 0, 0, 0, 0,0 0,8 Nom. drive shaft rpm Price includes () Drive unit.0 m with pop up overload flap c/w micro switch () in top cover. Support frame () is included for all gear box sizes. (4) Nord direct mounted gear box with electric motor IP, 0/400 volt (.-.0 kw) resp. 400/0 volt (4.0- kw) 0 Hz. () Tail section.0 m with chain tensioner and cleaning out hatch. () Intermediate sections for the required conveyor lenght. Drive unit, tail section and intermediate sections are manufactured from galvanized material and have steel bottom t=. mm. Conveyor chain M80A-00 (breaking strain 80 kn) with plastic flights on steel flights. Cleaning flight every fourth metre chain. Conveyor return chain runs on plastic rolls (8) mounted 000 mm centres. In metering inlet sections on plastic guide. () Outlet hopper Further dimensions available on CAD-files We reserve the right to change dimensions and specification. I ENG

27 Totalprice Model Code Length m 40 t/h 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h KTIFb 0/ KTIFb 0/ KTIFb 0/ gear box KTIFb 0/ KTIFb 40/ gear box gear box gear box gear box Price KTIFb KTIFb 40/ 04- gear box SK8 788 SK SK8 8 4 SK8 0 4 SK SK SK SK SK SK SK SK48 8 SK SK8 4 7 SK SK SK SK SK SK8 4 SK SK SK SK SK SK SK SK SK48 SK SK SK SK SK SK SK48 SK8 4 SK SK SK SK SK Max length 8 m 7 m 77 m m m m Extra cost to above prices for extensions with sections c/w chain: Part prices 40 & 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h No Description Code Code Code Code Code Drive unit KTIF m SK8 Ø mm M Drive unit KTIF m SK8 Ø40 mm M Drive unit KTIF m SK48 Ø0 mm M Drive unit KTIF m SK8 Ø0 mm M Drive unit KTIF m SK8 Ø70 mm M Tail unit m Ø40 mm Tail unit m Ø0 mm Chain m KTIF M80A Chain m KTIF M80A Chain 4 m KTIF M80A Interm. section 0. m Interm. section.0 m Interm. section.4 m Interm. section.0 m Support foot 70 mm (pcs/m) TT0 7 TT70 0 TT70 0 TT80 7 TT80 7 I ENG

28 Accessories KTIFb Accessories No Description 40 & 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h Code Code Code Code Code Motor weather cover SK Motor weather cover SK A -Machine/Slide controlled feeding In/outlet hopper B - Self regulated feeding Metering inlet section.0 m - extra cost Metering inlet section.0 m - extra cost Self regulating inlet Capacity damper for capacity control Accessories KTIS Center Inlet Slide Intermediate Inlet Slide Inlet slide control arm Rod with extension ki m c/w supports Top inlet Pop up overload flap in tail end Chain c/w cleaning buckets - extra cost/m conveyor: Return roll c/w shaft for M80A chain TT04 TT704 7 TT704 7 TT TT insp.windows, Interm. section Adaptor, adjustable Intersecting connection Chain speed monitor Plastic flight PMKTIF0 8 PMKTIF0 PMKTIF0 PMKTIF40 PMKTIF40 4 I ENG

29 KTIFb Notes I ENG

30 Trench intake conveyor KTIFg 0/ = 40 0/ = 0 40/ = / = 0 0/ = 0 40/ = 0 7 Description KTIFg is manufactured from galvanized material in accordance with the EU Machinery Directives. KTIFg is classified as a Category II D/OD Conveyor and is suitable to handle granulated and pulverized materials as comply with Zone or Zone and where the external atmosphere is unclassified. Capacities KTIFg horizontal trench intake conveyor is designed to feed a Skandia SEI Bucket Elevator. Rated capacities are based on grain with % moisture content and bulk density of 70kg/m³. The capacity will be affected with the same percentage as the gear box revolution changes. Type Capacity t/h Capacity m /h Chain speed m/s 0,4 0, 0, 0, 0,0 0,8 Nom. drive shaft rpm Price includes () Drive unit.0 m with pop up overload flap c/w micro switch () in top cover. Support frame () is included for all gear box sizes. (4) Nord direct mounted gear box with electric motor IP, 0/400 volt (.-.0 kw) resp. 400/0 volt (4.0- kw) 0 Hz. () Tail section.0 m with chain tensioner and cleaning out hatch. () Trench intake sections with support feet,.0 m shorter than the overall conveyor length. Drive unit, tail section and intermediate sections are manufactured from galvanized material and have steel bottom t=. mm. Conveyor chain M80A-00 (breaking strain 80 kn) with plastic flights on steel flights. Cleaning flight every fourth metre chain. Conveyor return chain runs on plastic rolls (8) mounted 000 mm centres. () Outlet hopper for drive unit. Further dimensions available on CAD-files We reserve the right to change dimensions and specification. I ENG

31 Totalprice Model Code 40 t/h 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h KTIFg 0/ KTIFg 0/ KTIFg 0/ KTIFg 0/ KTIFg 40/ Price KTIFg KTIFg 40/ 08- Length gear box gear box gear box gear box gear box gear box m total trench SK8 SK8 4 SK SK SK SK SK SK SK SK SK SK SK SK SK8 4 SK8 44 SK48 40 SK SK SK SK SK SK SK SK SK8 4 7 SK SK SK SK SK8 48 SK SK SK SK8 4 SK8 48 SK SK SK SK SK SK Max length m 4 m 4 m m m m Extra cost to above prices for extension of conveoyr with KTIFb sections c/w chain: Part prices 40 & 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h No Description Code Code Code Code Code Drive unit KTIF m SK8 Ø mm M Drive unit KTIF m SK8 Ø40 mm M Drive unit KTIF m SK48 Ø0 mm M Drive unit KTIF m SK8 Ø0 mm M Drive unit KTIF m SK8 Ø70 mm M Tail unit m Ø40 mm Tail unit m Ø0 mm Chain m KTIF M80A Chain m KTIF M80A Chain 4 m KTIF M80A Trench intake section KTIFg 0. m Trench intake section KTIFg.0 m Trench intake section KTIFg.0 m Assembly pack trench intake sect Support foot 70 mm (pcs/m) TT0 7 TT70 0 TT70 0 TT80 7 TT80 7 I ENG 7

32 Accessories KTIFg 0/ = 40 0/ = 0 40/ = / = 0 0/ = 0 40/ = 0 7 Accessories 40 & 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h No Description 40 t/h Code 0 t/h Code 80 t/h Code 00 t/h Code 0 t/h Code Motor weather cover SK Motor weather cover SK Interm. section 0. m Interm. section.0 m Interm. section.4 m Interm. section.0 m Support foot 70 mm (pcs/m) TT0 7 TT70 0 TT70 0 TT80 7 TT80 7 Capacity damper (for drive unit) In/outlet hopper Return roll c/w shaft for M80A chain TT04 TT704 7 TT704 7 TT TT Plastic flight PMKTIF0 8 PMKTIF0 PMKTIF0 PMKTIF40 PMKTIF40 insp.windows, Interm. section Chain speed monitor I ENG

33 KTIFg Notes Accessories 40 & 0 t/h 80 t/h 00 t/h 0 t/h 0 t/h Description Code Code Code Code Code Frequency Inverter for built in electrical panel For operation via frequency inverter, ensure that the motor s thermistors are connected. For operation lower that Hz, the motor must be equipped with a separate cooling fan. SK00,Kw SK00,0Kw SK00 4,0Kw SK00,Kw SK00 7,Kw SK,0Kw SK,0kW SK 8,kW Separate cooling fan Separate cooling fan.-.0 kw Separate cooling fan 4.0 kw Separate cooling fan.-7.kw Separate cooling fan.-.0 kw Separate cooling fan kw I ENG

34 Inclined top conveyor KTIA 0 0/40 = 40 0/40 = 0 40/40 = b 0a/b/c 0a 8 0a 0a 0b 0c 4 4 Description KTIA is manufactured from gavalnised material in accordance with the EU Machinery Directives. KTIA is classified as Category II D/ OD Conveyor and is suitable to handle granulated and pulverized material as comply with Zone or Zone and where the external atmosphere is unclassified. Capacities KTIA inclined top conveyor is designed to be fed from an SEI Bucket Elevator. Rated capacities are based on grain with % moisture and bulk density of 70kg/m³. The capacity will be affected with the same percentage as the gear box revolution changes. Type Capacity t/h 0 0 Capacity m /h Chain speed m/s 0, 0,87 0,7 0,7 0,87 Nom. drive shaft rpm 4 0 Price includes () Drive unit.0 m with () inspection flap c/w microswitch. Support frame () is included for all gear box sizes. (4) Nord direct mounted gear box with electric motor IP, 0/400 volt (.-.0 kw) resp. 400/0 volt (4.0- kw) 0 Hz. Power requirements are valid for 4 inclined conveyor. () Tail section 0. m with chain tensioner and cleaning out hatch. () Intermediate sections for the required conveyor lenght. Drive unit, tail section and intermediate sections are manufactured from galvanized material and have intermediate floor for return chain. Conveyor chain M80A-00 (breaking strain 80 kn) with plastic flights on steel flights. (0a) Inlet hopper for tail section and (0b) outlet hopper with overload sensor for drive unit. Required angle of inclination is to be stated at time of order. Further dimensions available on CAD-files We reserve the right to change dimensions and specification. 0 I ENG

35 Totalprice Model Code Length m gear box 40 t/h 0 t/h 80 t/h 00 t/h 0 t/h KTIA 0/40 KTIA 0/40 KTIA 0/ gear box gear box gear box gear box SK SK SK SK8 SK SK SK8 4 SK SK SK SK SK8 SK SK SK SK SK SK SK8 8 SK SK8 48 SK SK SK SK SK8 47 SK SK SK SK SK SK SK Price KTIA KTIA 40/40 KTIA 40/ Max length 8 m m 4 m m m Extra cost to above prices for extension of conveyor with sections c/w chain: Part prices 40 t/h 0 t/h 80 t/h 00 t/h 0 t/h No Description Code Code Code Code Code Drive unit m SK8 Ø mm Drive unit m SK8 Ø40 mm Drive unit m SK48 Ø0 mm Drive unit m SK8 Ø0 mm Drive unit m SK8 Ø70 mm Tail section 0. m Ø40 mm Tail section 0. m Ø0 mm Chain m M80A Chain m M80A Chain 4 m M80A Interm. section 0. m inclined Interm. section.0 m inclined Interm. section.4 m inclined Interm. section.0 m inclined I ENG

36 Accessories KTIA 0 0/40 = 40 0/40 = 0 40/40 = b 0a/b/c 0a 8 0a 0a 0b 0c 4 4 Accessories 40 t/h 0 t/h 80 t/h 00 t/h 0 t/h No Description Code Code Code Code Code Motor weather cover SK Motor weather cover SK Transverse outlet slide 8 Remote controlled Remote controlled c/w pos. indicator Weather cover rem.contr.int. outlet Motor controlled, c/w pos. indicator Electro-pneumatic c/w pos. indicator Brush can not be used 0a Inlet/outlet hopper a Inlet/outlet hopper a Inlet/outlet hopper b Outlet hopper c/w overload sensor b Outlet hopper 0 c/w overload sensor b Outlet hopper 4 c/w overload sensor c Outlethopper Straight Plastic flight PMKTIA00 4 PMKTIA00 4 PMKTIA00 8 PMKTIA PMKTIA insp.windows, Interm. section Wire support m Adaptor, height 84 mm I ENG

37 0 0/ = 0 0/ = 0 40/ = 0 KTIA m Max m I ENG

38 Curved top conveyor KTIB 0a/b 0/40 = 40 0/40 = 0 40/40 = /0 = 0 80/00 = 0 0 = 0 0a 0b 8 0a 0b 7 Description KTIB is manufactured from galvanized material in accordance with the EU machinery directives. KTIB is classified as a Category II D/ OD Conveyor and is suitable to handle granulated and pulverized materials as comply with Zone or Zone and where the external atmosphere is unclassified. Capacities KTIB horizontal top conveyor is designed to be fed from an SEI Bucket Elevator. Rated capacities are based on grain with % moisture and bulk density of 70kg/m³. The capacity will be affected with the same percentage as the gear box revolution change. Type Capacity t/h 0 0 Capacity m /h Chain speed m/s 0, 0,87 0,7 0,7 0,87 Nom. drive shaft rpm 4 0 Price includes () Drive unit.0 m with () inspection flap c/w microswitch. () Support frame is included for all gear box sizes. (4) Nord direct mounted gear box with electric motor IP, 0/400 volt (.-.0 kw) resp. 400/0 volt (4.0- kw) 0 Hz. The output of the motor in the total price is dimensioned based on a machine with 0 bend section, 0. m inclined tail section and.4 m inclined intermediate section. In the cases where the inclined section is extended or the angle is changed, recalculate the output requirement using the Design Calculator, or contact your Skandia representative. () Tail section 0. m with chain tensioner and cleaning out hatch. () Intermediate sections for the required conveyor lenght. (0b) Outlet hopper with overload sensor for drive unit. Drive unit, tail section and intermediate sections are manufactured from galvanized material and have intermediate floor for return chain. Conveyor chain M80A-00 (breaking strain 80 kn) with plastic flights on steel flights. Note: the table prices do not include () bend section. () Inlet hopper is included in () bend sections. Further dimensions available on CAD-files We reserve the right to change dimensions and specification. 4 I ENG