Tubing-Casing Technologies STX , 4.5 INCH 13.5 PPF.
|
|
|
- Alexandra McCarthy
- 5 years ago
- Views:
Transcription
1 STX-SPAN SYSTEM STX NOTED 1 LOWER COMPLETION STX NOTED 1 LOWER STINGER ASSEMBLY STX NOTED OPT. STANDARD STINGER ASSEMBLY STX NOTED 1 TOP STINGER ASSEMBLY STX NOTED 1 TOP COMPLETION STX NOTED GTX FT. SECTION L-80 GTX-4500-C110 GTX FT. SECTION L-80 GTX-4500-C105 GTX FT. SECTION L-80 GTX-4500-C102 GTX FT. SECTION L-80 GTX-4500-C120 MINIMUM EQUIPMENT REQUIRED FOR A FULL SYSTEM CONSISTS ITEMS SHOWN PRODUCT OFFERINGS: Our stackable X-SPAN products allow for long straddle systems to be deployed into a live well control situation in multiple runs using wire-line, slick line, coil tubing or conventional tubing. The stackable system can utilize the X-SPAN or GTX-SPAN elements to isolate the top and bottom of the intended zone, while specially engineered seal assemblies are utilized between each sequential intermediate section. This technology allows for extremely long isolation systems to be deployed when lubricator length or well accessibility is an issue. BENEFITS/CAPABILITIES: Can be deployed on wire line, slick line, coil tubing or jointed pipe. High pressure and high temperature applications. Unlimited lengths can be straddled Can incorporate standard off-the-shelf customer supplied tubulars as straddle base pipe material. Can incorporate sand screens, slotted liner, flow control devices such as profile nipples and sliding sleeves. X-SPAN-STX.indd 29
2 LOWER COMPLETION STX NOTED 2 ELASTOMER GTX HSN 1 BOX ELEMENT GTX BOTTOM SWAGE GTX SUPER / HYPER CHROME 1 O-RING OOO-V VITON 1 O-RING OOO-V VITON 1 60 K SHEAR RING PAT SET SCREW 1/4 INCH X 20 TPI, 5/16 INCH PUR ALLOY 1 SLEEVE NUT SET / SETTING SLEEVE LOCK NUT SET / QUICK CHANGE ROD SET / QUICK CHANGE NUT SET / TOP ADAPTER ROD SET / ROD TANDEM CONNECTOR SET / BOTTOM ROD EXTENDED SET L 4130 / COLLET ASSEMBLY SET NOTED 1 COLLET BODY SET / END SUB SET / COLLET SUPPORT SET A 4140 / LOWER RECEIVER STX SUPER / HYPER CHROME 1 LATCH COLLET 90 L/H STX SUPER / HYPER CHROME 1 SETTING SLEEVE UPPER SET A 4140 / SETTING SLEEVE LOWER SET B 4140 / 4142 MINIMUM EQUIPMENT REQUIRED X-SPAN-STX.indd 30
3 LOWER STINGER ASSEMBLY STX NOTED 1 LOWER STINGER W/ L/H WICKER STX SUPER / HYPER CHROME 1 STANDARD RECEIVER STX SUPER / HYPER CHROME OPT. 10 FT. SECTION GTX C 13 CR 1 SEAL RET. W 90 WICKER L/H STX CR 1 LATCH COLLET 90 STX SUPER / HYPER CHROME DEPLOYMENT AND RETRIEVAL TOOL DRT NOTED STANDARD STINGER ASSEMBLY STX NOTED 1 STANDARD STINGER STX SUPER / HYPER CHROME 1 STANDARD RECEIVER STX SUPER / HYPER CHROME OPT. 10 FT. SECTION GTX C 13 CR 1 SEAL RET. W 90 WICKER STX CR 1 LATCH COLLET 90 STX SUPER / HYPER CHROME 1 DEPLOYMENT AND RETRIEVAL TOOL DRT NOTED TOP STINGER ASSEMBLY STX NOTED STANDARD STINGER STX SUPER / HYPER CHROME TOP RECEIVER STX SUPER / HYPER CHROME OPT. 10 FT. SECTION GTX C 13 CR 1 SEAL RET. W 90 WICKER STX CR 1 LATCH COLLET W/77 DEG STX SUPER / HYPER CHROME 1 DEPLOYMENT AND RETRIEVAL TOOL DRT NOTED MINIMUM EQUIPMENT REQUIRED FOR 10 FT. SYSTEM X-SPAN-STX.indd 31
4 TOP COMPLETION STX NOTED 2 ELASTOMER GTX HSN 1 PIN ELEMENT GTX TOP SWAGE GTX SUPER / HYPER CHROME SET SCREW 1/4 INCH X 20 TPI, 5/16 INCH PUR ALLOY K SHEAR RING PAT SLEEVE NUT SET / SETTING SLEEVE LOCK NUT SET / SETTING SLEEVE SET / QUICK CHANGE ROD SET / QUICK CHANGE NUT SET / TOP ADAPTER ROD SET / ROD TANDEM CONNECTOR SET / BOTTOM ROD EXTENDED SET L 4130 / COLLET ASSEMBLY SET NOTED 1 COLLET BODY SET / END SUB SET / COLLET SUPPORT SET A 4140 / PROFILE SUB STX SUPER / HYPER CHROME 1 SEAL RET. W 77 WICKER STX TOP STINGER W / 77 DEG WICKER STX SUPER / HYPER CHROME MINIMUM EQUIPMENT REQUIRED X-SPAN-STX.indd 32
5 SECTION SPECIFICATIONS: PART NUMBER LENGTH OAL WEIGHT MATERIAL GTX L-80 GTX C GTX L-80 GTX C GTX L-80 GTX C GTX L-80 GTX C SYSTEM WEIGHTS SETTING TOOL OPTIONS: WEIGHT (LBS.) STX STX STX STX STX HYDRAULIC WEIGHT (LBS) 3-1/8 INCH HYDARULIC SET /4 INCH MULTISTAGE SETTING TOOL INTERNALLY STROKED (HYDRAULIC) SET SCREEN SUB CIRCULATION SUB DUMP SUB TT A SET OT B /4 INCH MULTISTAGE SETTING TOOL 3-1/4 INCH MULTISTAGE SETTING TOOL INTERNALLY STROKED PYROTECHNIC WEIGHT (LBS) SET SET POWER CHARGE OPC MS IGNITER DET DET X-SPAN-STX.indd 33
6 DRT ITEM NO. PART NUMBER DESCRIPTION QTY. 1 DRT INNER MANDREL 1 2 DRT LOCKING COLLET 1 3 DRT COLLET HOUSING 1 4 DRT SPRING STOP 1 5 DRT SCREW HOUSING 1 6 DRT SUCKER ROD CONNECTION 1 7 PUR SOCKET HEAD SCREW 3/8-16X3/8 1 8 DRT INSTALLATION TOOL 1 DRT SUPPORT ROD 1 DRT HANDLE 1 9 DRT /8-16 DOG NOSE 1/2 INCH 4 10 DRT HANDLING TOOL 1 DRT PIN HANDLE 1 DRT BOX HANDLE 1 11 ST SET SPRING 1 12 ST RELEASE SPRING DRT (R00) X-SPAN-STX.indd 34
Completion Tools Catalog
Completion Tools Catalog www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. TABLE OF CONTENTS P/N Description Page P/N Description
Special Features. u By-pass below upper slips to wash. debris when valve is opened. u By-pass is opened before upper slips.
Quality We Know Downhole. ASI-X Packer The D&L ASI-X Packer is the most versatile of the mechanically set retrievable packers and may be used in any production application. The ASI-X Packer is suited for
SLIDING SLEEVE. BSS-S Profile BSS-H Profile
SLIDING SLEEVE BSS-S Profile BSS-H Profile BSS SLIDING SLEEVE INNER SLEEVE CLOSED POSITION TOP SUB UPPER SUB BODY SUB LOWER SUB BOTTOM SUB The Benoit Sliding Sleeve TM (BSS) is a premium Chrome Alloy flow
MagnusSeal Retrievable Seal Bore Packer Product No.: MSP 7500
Product No.: MSP 7500 Packer Retrieving Tool www.maximuscompletions.com is a reliable high pressure packer used for production, gravel packing, or injection applications. seal bore packer is set on wireline
Drilling & Down-hole Completion Tools
HYDRAULIC SET PRODUCTION PACKER MODEL: WC-HP-1 & WC-HPL-1[Large Bore] PRODUCT No.: WC-20101 & WC-20112 HP-1 is an industry standard, fully hydrostatic, hydraulic set and shear release single string retrievable
We Know Downhole. PRODUCT CATALOG
PRODUCT CATALOG Our Company D&L Oil Tools designs, manufactures, and assembles downhole equipment for customers in both domestic and international markets. Headquartered in Tulsa, Oklahoma, our tradition
TMK QUANTUM Infinity. Unlimited Stage Fracturing System COMPLETIONS
TMK QUANTUM Infinity Unlimited Stage Fracturing System COMPLETIONS TMK QUANTUM Infinity TMK QUANTUM Infinity ball-actuated sliding sleeve system utilizes a revolutionary, patent pending electronic counter
Well Completions. Thursday, 4 July 13
Well Completions Well Completions Well Completions Components and Functionality Components and Functionality Components and Functionality Xmas Tree & Wellhead Open-Hole Completion Open-Hole Completion
SECTION VIII: TEST TOOLS and CHECK VALVES
INDEX of SECTION VIII: PRODUCT DESCRIPTION Code Page TEST TOOLS, VIII-0-10 ROTFB-2 12 1,2 ROTRB-2 12 3,4 ROTN 14 5,6 ROTR 14 7 ROTX 14 8 POR - PORN and POX - POXN 14 9 CVR - CVRN and CVX - CVXN Check Valve
LEE NAK GUI TCP SERVICE COORDINATOR APPS
Live Well Deployment System LEE NAK GUI TCP SERVICE COORDINATOR Challenges Monobore completion High angle wells Long perforation intervals Underbalanced perforating (static or dynamic) Well control barriers
We Know Downhole. PRODUCT CATALOG
We Know Downhole. PRODUCT CATALOG Our Company D&L Oil Tools designs, manufactures, and assembles downhole equipment for customers in both domestic and international markets. Headquartered in Tulsa, Oklahoma,
SECTION VI: BHP INSTRUMENT HANGERS ACCESSORIES
INDEX of SECTION VI: BHP TOOLS PRUCT DESCRIPTION BHP TOOLS BHP - and TOOLS Product Code Page VI-0-16 A - For LANDING NIPPLES: VI-1-9 ROTFSB 33 1 ROTFWB 33 1 ROTRZB 33 2,3 ROH and RNH 33 4,5 XNH and XOH
Completion Solutions Inc.
Completion Solutions Inc. Simple Designs That Simply Work! Company Introduction Dec 2012 1 Who is Completions Solutions Inc? Founded in 2012 Focused on efficient and economical well bore stimulation (both
Tryton People. Products. Performance.
Lloydminster Field Office Corporate/Accounting Office 6702-56 Street Lloydminster, AB T9V 3A7 Ph: 780 875-0800 (24hr) Brooks Field Office 329-9th St. E Brooks, AB T1R OK2 Ph: 403 362-8600 (24hr) High Level
Set, seal, and retrieve with confidence. Packers Catalog
Set, seal, and retrieve with confidence Packers Catalog 1 2 Table of Contents Conventional Packers...05 ESP/Dual Completion Packers...35 High-Rate-Gas Packers...43 HPHT Packers...47 Intelligent Completion
Tryton. Tool Services. People. Products. Performance. Calgary - Sales/Marketing Office 1100, 250 2nd St. SW Calgary, AB T2P 0C1 Ph:
Tool Services Lloydminster Field Office Corporate/Accounting Office 6702-56 Street Lloydminster, AB T9V 3A7 Ph: 780 875-0800 (24hr) Brooks Field Office 329-9th St. E Brooks, AB T1R OK2 Ph: 403 362-8600
SERVICE TOOLS. Magnus MDT Service Packer V-III Un-Loader Valve MANC Storm Valve
s ervice packers Magnus MDT Service Packer V-III Un-Loader Valve MANC Storm Valve Magnus MDT Service Packer Magnus MDT Retrievable Packer consists is a compression set packer with hydraulic hold down that
Special Features. u Blanking plug seats in top of. u Bonded seal allows disconnects. and re-connects. u Right-hand or left-hand release
DT-2 On/Off Tool The D&L DT-2 On/Off Tool is a tubing seal receptacle allowing isolation of a lower zone using a wireline blanking plug. The tubing string can then be removed from the well. When re-run,
Cloppenburg Germany Germany Tel.: +49 (0) Hohe Tannen 14
Downhole Tools Fangmann Energy Services GmbH & Co. KG Hohe Brietzer Tannen Weg 14 10 49661 29410 Cloppenburg Salzwedel Tel.: Tel.: +49 +49 (0)4471 (0)3901 98008-0 8363-0 Fax: Fax: +49 +49 (0)4471 (0)3901
Dynamic MDT Service Packer V-III Un-Loader Valve ANC Storm Valve
Dynamic MDT Service Packer V-III Un-Loader Valve ANC Storm Valve Dynamic MDT Service Packer Dynamic MDT Retrievable Packer consists of a compression set packer with hydraulic hold down that is designed
Product Overview Last date of Revision:
Product Overview Last date of Revision: 07-07-2018 Gryphon Oilfield Solutions is a worldwide provider of quality, value driven, oilfield products and services. We specialize in aggressive well completions
Tryton. Tool Services. People. Products. Performance. Canadian Locations
Tool Services Canadian Locations Lloydminster - Corporate Office 6702-56 Street Lloydminster, AB T9V 3A7 Ph: 780 875-0800 (24hr) Brooks - Field Office 329-9th St. E Brooks, AB T1R OK2 Ph: 403 362-8600
SAPEX OIL TOOLS LTD. DOWNHOLE COMPLETIONS PACKERS & COMPLETION EQUIPMENT WORKOVER & COMPLETION SERVICE TOOLS PRODUCTS, APPLICATIONS & SPECIFICATIONS
PRODUCTS, APPLICATIONS & SPECIFICATIONS TOMORROW S TECHNOLOGY FOR TODAY S ENERGY WHO ARE WE? We are an independent International Oilfield Service Company, offering 24-Hour Drilling, Completion and Work-over
PRODUCT LINE. CPS Oil & Gas Equipments Private Limited. Liner Hanger System. Gas Lift Equipment. Cementing and Casing Accessories
PRODUCT LINE CPS Oil & Gas Equipments Private Limited Liner Hanger System Cementing and Casing Accessories Completion and Downhole Equipment Gas Lift Equipment COMPANY PROFILE CPS, a company based on Indian
Service Tools Catalog
Service Tools Catalog www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. TABLE OF CONTENTS P/N Product Description Page Type P
Express Series Multi Configuration Composite Body Bridge / Frac Plugs
Multi Configuration Composite Body Bridge / Frac Plugs The Express Series Bridge and Frac Plugs utilize a unique combination of composites to provide a dependable, durable, and cost-efficient method for
Downhole Tools Worldwide.
Downhole s Worldwide. INFLATABLES PRODUCTION PACKER SEV-SET PACKER THRU TUBING PACKER CASING PACKER STRADDLE PACKER HYDRAULIC DISCONNECT ON-OFF SEAL Table of Contents 1-1 1-2 1-3 1-4 1-5 1-6 1-7 TechWest
MESQUITE OIL TOOLS, INC. PRODUCT CATALOG
MESQUITE PRODUCT CATALOG MESQUITE Mesquite Oil Tools, Inc. 8007 West Industrial Midland, TX 79706 Mesquite Oil Tools, Inc. P.O. Box 668 Snyder, TX 79550 Jerry Pechacek CEO Justin Pechacek President Office
Subsurface Flow Controls
Subsurface Flow Controls Subsurface Flow Controls Landing Nipples X, R, RPT, FBN Lock Mandrels and accessories Nippleless Tubing Plugs - Mirage plug, Monolock DuraSleeve Sliding Side-Door circulating device
Tryton. Tool Services. People. Products. Performance. Canadian Locations
Tool Services Canadian Locations Lloydminster - Corporate Office 6702-56 Street Lloydminster, AB T9V 3A7 Ph: 780 875-0800 (24hr) Brooks - Field Office 329-9th St. E Brooks, AB T1R OK2 Ph: 403 362-8600
TABLE OF CONTENT. Description
TABLE OF CONTENT Description Page OQLH Liner Hanger Packer Combo 1 Set Liner Packer Hydraulic or Mechanical Set 2 Quartus QLG Liner Extension Assembly 3 Quartus Liberty Liner Hangers Single & Dual Cone
WELLCARE OIL TOOLS PVT LTD PACKER ACCESSORIES & TOOLS
PACKER ACCESSORIES & TOOLS 1 PRODUCT INDEX 1. Drag Block Tubing Anchor/Catcher 2. Setting Tool Nipple 3. Splined Expansion Joint 4. Auto Lock Expansion Joint 5. Splined Expansion Joint 6. Expansion Joint
Pneumatic Cylinders. Series 3A and 3AN. Series 3A and 3AN
Series 3A and 3AN for Heavy-Duty Service n High-Tech Duralon Rod Bearing n State-of-the-Art Rod and Piston Sealing System n Heavy-Duty Piston-to-Rod Connection n1.50" 14.00" Bores n 150 250 psi Pressure
DRILLING MOTOR HANDBOOK
DRILLING MOTOR HANDBOOK GORILLA Drilling Motors TM rev213.6.19 DRILLING MOTOR HANDBOOK www.axonep.com The information contained in this handbook is for reference only. AXON Downhole Products Inc. does
Completion Systems & Mechanical Products
Completion Systems & Mechanical Products ESP Dual Systems ESP Encapsulation (CAN / POD) ESP Bypass Systems performance with reliability Tubing String Products Redundancy Y-Tool - Single ESP System As the
MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES
MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES Prepared for the University of Texas by Pettigrew Engineering, PLLC Tom Pettigrew, PE President Revision: 5 15 October
MINING & DRILLING PRODUCTS. B Core Retrieval System
MINING & DRILLING PRODUCTS B Core Retrieval System CORE BARREL ASSEMBLY, B -0-00 Core Barrel Assembly, 0 ft (.0 m) -0-00 Core Barrel Assembly, ft (. m) -0-00 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner
TCI DUAL QUARTER ANCHOR CATCHER (TDQAC)
TCI DUAL QUARTER ANCHOR CATCHER (TDQAC) The TQDA is a rugged anchor-catcher that operates with minimum (less than a 1/4 turn) tubing string rotation to set or release. The no torque option resists right
MINING & DRILLING PRODUCTS. P Core Retrieval System
MINING & DRILLING PRODUCTS P Core Retrieval System CORE BARREL ASSEMBLY, P -0-0 Core Barrel Assembly, 0 ft (.0 m) -0-0 Core Barrel Assembly, ft (. m) -0-0 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner Tube
WLTC Retrievable Bridge Plug
service Tools WLTC Retrievable Bridge Plug The WLTC Retrievable Bridge Plug is designed to perform all tasks normally required of a tubing run packer-type bridge plug and can be quickly converted to run
Model No. EK8100 POWER CUTTER
1 / 7 2 / 7 3 / 7 4 / 7 5 / 7 6 / 7 7 / 7 1 / 5 Item Parts No. Description I/C Qty N/O Opt. 1 Opt. 2 Note 001 168507-3 TANK CAP COMPLETE 1 D10 INC. 2 002 213080-9 O RING 29.5 1 003 163499-1 SUCTION HEAD
MINING & DRILLING PRODUCTS. N3 Core Retrieval System
MINING & DRILLING PRODUCTS N Core Retrieval System CORE BARREL ASSEMBLY, N - - 090 Core Barrel Assembly, 0 ft (.0 m) - - 09 Core Barrel Assembly, ft (. m) - - 09 Inner Tube Assembly, 0 ft (.0 m) - - 09
MWD Components Ceramic & Carbide Parts MWD Electronics Running Gear Handling Equipment Drill Pipe Screens Float Valves Repair Kits Job Boxes Gamma
Float Valves Repair Kits Excellence in Energy Services for over years www.huntingplc.com Drilling drilling.tools@hunting-intl.com specialty.supply@hunting-intl.com www.hunting-intl.com/titan/contact-titan
Casing Scraper. Service Equipment. Features
Casing Scraper The Casing Scraper is a spring type, mechanical casing scraper, featuring a large by-pass area between the blades to allow circulation of debris. The body is constructed of the highest quality
MINING & DRILLING PRODUCTS. N2U Core Retrieval System
MINING & DRILLING PRODUCTS NU Core Retrieval System CORE BARREL ASSEMBLY, NU -0-009 Core Barrel Assembly, 0 ft (.0 m)* -0-009 Core Barrel Assembly, ft (. m)* -0-009 Inner Tube Assembly, 0 ft (.0 m)* -0-009
Thru-Tubing. Motors and standard tools
Thru-Tubing Motors and standard tools Thru-Tubing Reliable. Innovative. Premium. We are proud of our products and their contribution to the downhole drilling and thru-tubing industries. Research Innovate
T-2 On-Off Tool. Available with all common wireline profiles, the stinger works with industrystandard blanking plugs, standing valves and regulators.
T-2 On-Off Tool Classic Oilfield s T-2 On-Off Tool enables the tubing string to be disconnected above a packer for zonal isolation, tubing retrieval, and temporary zone abandonment. The tool contains an
PARTS MANUAL. PTV205T PTV305 PTV305ST Pumps. Models. PUB-PP1193 Rev. 7/98
PARTS MANUAL Models PTV205T PTV305 PTV305ST Pumps PUB-PP1193 Rev. 7/98 GROUP INDEX Group Name Page PUMP - PTV205T... 4 PUMP - PTV305... 6 PUMP - PTV305ST... 8 CRANKCASE... 10 CRANKSHAFT and PISTON...
RODEC "C" Low Profile Rotator / RODEC "C" Integral Rotator (3 in 1)
We have been providing effective tubing wear solutions for over 70 years. Whether using rod pumping units or progressing cavity downhole pumps, we offer the most complete package of wear prevention solutions
Safety Valves. How Capillary is Integrated. Past and present. Agenda. Br oad Usage of Capillary Str ings
Agenda Broad usage by industry of capillary Tubing Retrievable Safety Valve W ells Can Now Receive A Micro String W ithout The Insertion Of A W ireline Insert Valve Or A W ork-over Re-cap of present technologies
Spearhead TWIGA. TWIGA Reach Mower 545 / 595 / 640T. Edition 1.1 April 2014 Part No
TWIGA Reach Mower 545 / 595 / 640T Edition 1.1 April 2014 Part No. 8999016 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 Tank Lid 8 Rear Panel 10 Slew Post 12 Lift Frame 14 Main Arm 16 Dipper Arm 18
RODEC TUBING ROTATOR SOLUTIONS
RODEC TUBING ROTATOR SOLUTIONS RODEC TUBING ROTATOR SOLUTIONS One Company, Unlimited Solutions Since 1841, National Oilwell Varco has been dedicated to ensuring customers receive the highest quality oilfield
1999 Explorer/Mountaineer Workshop Manual
Page 1 of 16 SECTION 211-04: Steering Column 1999 Explorer/Mountaineer Workshop Manual DISASSEMBLY AND ASSEMBLY Procedure revision date: 07/27/1998 Steering Column Automatic Transmission Disassembly WARNING:
SERVICE MANUAL / PARTS LIST MODEL XSG-5
ation SERVICE MANUAL / PARTS LIST MODEL XSG-5 1055 Mendell Davis Drive Jackson MS 39272 888-994-7636 601-372-3903 Fax 888-864-7636 unifiedbrands.net PART NUMBER 158634 REV B (11/11) TABLE OF CONTENTS 2
Construction characteristics. Technical characteristics. End plates Rod Barrel Rod-guide bushing Piston
Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C3 chromed steel or stainless steel aluminium alloy anodised spheroid bronze
CHINA VIGOR DRILLING OIL TOOLS AND EQUIPMENT CO., LTD.
Perforating Gun China Vigor Perforating Guns are made of high-strength alloy steel tube, with the feature of good mechanical properties, high size precision and resistant to high temperature and pressure.
START BUILDING YOUR LEGACY TODAY
START BUILDING YOUR LEGACY TODAY LEGACY OIL TOOLS OVERVIEW Since its foundation in 2006, Legacy Oil Tools has become a top-tier manufacturer of premium quality, energetic oil tools. The Legacy team s expertise
THE WOLSELEY "VIPER" AERO ENGINE. (Hispano-Suiza W.4.A*)
13 THE WOLSELEY "VIPER" AERO ENGINE. (Hispano-Suiza W.4.A*) General description. The engine referred to in this article is the Hispano-Suiza 180 hp W.4.A* Aero Engine, as made by Wolseley Motors Ltd. The
Standard strokes (for all diameters) Stroke tolerance (ISO 15552)
Series 19-192 Cylinders according to standard ISO 12 COIHT Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C chromed steel
Volvo - Product Code 100,1,2, 4, 6, 7, 8, 9, 10 & 112
Volvo - Product Code 100,1,2, 4, 6, 7, 8, 9, 10 & 112 Item Description Product_ Code On Hand Qty 20460353 TEMPERATURE SENSOR 100 1 3854260 DISTRIBUTOR 100 1 3854001 COIL 100 1 876839 GASKET KIT 100 1 70326595
Composite Plugs. Index
Composite Plugs Downhole Isolation Tools - Multi-Stage Operations Index Rapid Mill Ball Drop... 1-2 Rapid Mill Flo-Back Flapper... 3-4 Series (Ball Drop, Bridge, Flo-Back, Flo-Back with Bio-Ball)... 5-6
rev 1_09/20/2017 PS-35C EA3500SR
C 1 Tank, Handle 5 7 6 8 17 9 1 2 10 11 12 13 18 19 20 3 21 4 22 23 14 16 2 1 Tank, Handle 1 1 168507-3 TANK CAP COMPLETE 1 1 INC. 2 1 2 213080-9 O RING 29.5 1 1 1 3 163447-0 GASOLINE FILTER 1 1 1 4 195757-7
W I L D W E L L C O N T R O L WIRELINE OPERATIONS
WIRELINE OPERATIONS Wireline Operations Learning Objectives You will learn various activities suitable for wireline operations. You will learn best practices and techniques for conducting wireline operations.
FORM NO cm Recycler /Rear Bagger. Model No & Up. Parts Catalog
FORM NO. 3321 286 53cm Recycler /Rear Bagger Model No. 20787 8900001 & Up Parts Catalog 3321 286 ORDERING REPLACEMENT PARTS To order replacement parts, please supply: the part number, the quantity, and
Parts Manual 125 Series MA
Parts Manual 125 Series MA - 1 - HEADSTOCK ASSEMBLY - 2 - HEADSTOCK ASSEMBLY ITEM PART N DESCRIPTION QTY 1 1156300 Handle 2 2 900115 Self Locking Nut 3/8 UNF 2 3 1320500 Verticality Screw 2 4 900027 Bolt
One Step Rod Cutter Rear Pull
One Step Rod Cutter Rear Pull Drivelines Section 13 Model Years 1988 1991 (Secondary Driveline) 1 Solid Shaft... 2-5 Model Years 1988 1992 (Primary Driveline) G & G... 6-11 Model Year 1992 (Secondary Driveline)
TL BOP. TL Custom Features:
TL BOP The Cameron TL BOP product line is the result of an evolution of Cameron s successful U, UII and T BOPs combined with custom features based on each customer s specific requirements. All TL BOPs
Spearhead TWIGA. TWIGA Reach Mower 555/600/655T/700T 555FR/600FR. Edition 2.5 June 2014 Part No
TWIGA Reach Mower 555/600/655T/700T 555FR/600FR Edition 2.5 June 2014 Part No. 8999057 0 Contents Ordering Your Parts 3 A Frame 4 Tank 6 Slew Post 8 Lift Frame 10 Tank Lid 12 Rear Panel 13 Stabiliser Brackets
Casing Cementation Equipment
Casing Cementation Equipment Float Equipment Cementing Plugs Casing Centralizers Stage Tools Inflatable Casing Packers Extended Reach Casing Equipment Swellable Casing Packers Liner Equipment Quality Control/Assurance
225 CARTRIDGE DUAL SEAL
225 CARTRIDGE DUAL SEAL MECHANICAL SEAL INSTALLATION INSTRUCTIONS PREPARATION 1 2 500.010" 0,25 mm 3 4.32 µ" 0,8 µm R a 1000 + ±.001".002" 0,025mm 0,050mm CAUTIONS These instructions are general in nature.
Continuous Sampling OVERSHOT STYLE ROD STYLE SWIVEL OVERSHOT ASSEMBLY CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY
ROD STYLE OVERSHOT STYLE OVERSHOT ASSEMBLY SWIVEL CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY SAMPLE BARREL SPLIT OR SOLID SHOE Split Barrel Sampler Assemblies Continuous
Edition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side seperate connections with Tuchel-plug. In varation to the torches listed below, the torches can also be produced with
Edition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side seperate connections with Tuchel-plug. In varation to the torches listed below, the torches can also be produced with
Coiled Tubing Solutions
E N H A N C I N G PRODUCTIVITY Coiled Tubing Solutions Solve Downhole Problems With Reliable, Cost-Effective Technology Baker Oil Tools Coiled Tubing Handbook The global oil and gas industry is using coiled
Heating chamber with mechanical convection
FED series 240 Drying ovens / Heating ovens Heating chamber with mechanical convection The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly
Heating chamber with mechanical convection
FED series 720 Drying ovens / Heating ovens Heating chamber with mechanical convection The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly
Conventional Gas Lift Mandrels
Conventional Gas Lift Mandrels Gas lift mandrels installed as part of tubing strings Gas lift service Single- and dual-string installations Injection- and production-pressure operations BENEFITS Application-specific
Coiled Tubing Tool EXTERNAL SLIP CONNECTOR. Feature. Specification Tool O.D. inch. Coiled Tubing O.D. inch. Tool I.D. inch. Conn.
Coiled Tubing Tool EXTERNAL SLIP CONNECTOR The External Slip Connector is designed through a unique non-rotational slip, the upper end is connected with the coiled tubing, and the lower end is connected
MASTER SERIES HEAVY DUTY GAS CHAR-BROILER MODELS: MST17B, MST24B, MST34B; MST17BE, MST24BE, MST34BE
Page 86 FORM # Ranges MST Models (Rev 2) MASTER SERIES HEAVY DUTY GAS CHAR-BROILER S:,, ; E, E, E Models:,,, E, E, E 2526000 LP BG Flue Cap 34 1 1 1 2526001 LP BG Flue Cap 24 1 1 2526002 LP BG Flue Cap
Intervention Barriers
Intervention Barriers A barrier is defined as a means of containing wellbore pressure and fluids. Two effective barriers are required for most intervention operations. Consider when barriers are effective
Delivering innovation through engineering
Delivering innovation through engineering +44 1224 727480 Completions & Work-over Operations Bore Selector gives access to either the main production bore or annulus in a traditional vertical xmas tree,
Heating chamber with mechanical convection
FED series 53 Drying ovens / Heating ovens Heating chamber with mechanical convection The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly
Performance Products 2013 HOSE & FITTINGS. Unit 8/2 Carson Rd Malaga, WA 6090 Phone: Fax:
HOSE & FITTINGS Performance Products 2013 19 Performance Products Unit 8/2 Carson Rd Malaga, WA 6090 Phone: 92489994 Fax: 92489995 www.couplers.com.au Thread Sizes THREAD Performance Products typically
SPECIFICATIONS FOR MULTIMIXER PZ-CB-MM CONE BOTTOM, CENTER OUTLET
A B C BALDOR 28" PZ-MM-CB HP & RPM HP APPROX CAPACITY A B C SCRAPER HIGH SHIPPING SHEAR WEIGHT * 10 GAL 16 21 14 1@34 3 725 # * 25 GAL 24 29 16 2@30 5 850 # * 50 GAL 28 33 24 3@28 10 1100 # 100 GAL 38
air pressure intensifier for increased thrust consistent clamp force min to max collet spacing ergonomic design
Formerly Hi-Shear Tooling Official Distributor: SPACEMATIC Wm. Lees & Sons Ltd. United Kingdom Telephone: +44 (0) 1698 426662 Email: sales@ Website: ULTRALITE TM DRILLING MACHINES Model 1000II Standard
Heating chamber with mechanical convection
FED series 53 Drying ovens / Heating ovens Heating chamber with mechanical convection The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly
Push-Pull Controls and Accessories
Solid metal construction Pilot friendly knobs Lifetime lubrication Superior low friction conduit Custom controls available Metal Construction Unlike the controls of our competitors that use plastic, McFarlane
Restoring Functionality to Subsurface Safety Valves with Extreme Damaged Seal Bores. Graeme Allan, BP Well Intervention Engineer
Restoring Functionality to Subsurface Safety Valves with Extreme Damaged Seal Bores Graeme Allan, BP Well Intervention Engineer Scale of the problem. Industry-wide issue 2013 Sean MacPhee, Enquest Innovative
PCC Technova. Series "CPL" Cylindrical Valves. Full & Regular Port 1/2" - 6" A PCC Flow Technologies Company
PCC Technova A PCC Flow Technologies Company Series "CPL" Cylindrical Valves Full & Regular Port 1/2" - 6" FEATURES ISO mounting flange dynamic stem seals elastomer backing stem bearing cavity free design
TAM-J. Highest reliability multiple-set inflatable packer system available. Element sizes for 2-3/8 tubing through 30 casing
TAM-J Multiple Set In f l ata b l e Packer System Highest reliability multiple-set inflatable packer system available Element sizes for 2-3/8 tubing through 30 casing Easy conversion to straddle tool ISO
Nut The standard bottom nut is a bullnose nut. Optional nut types, sub, mill, and side hill, are available.
Overview Logan Releasing Spears provide a positive means to engage and retrieve an internal fish from the well. The design of this rugged, dependable, and inexpensive internal catch fishing tool ensures
66cm Heavy-Duty Rear Bagger Lawn Mower
Form Number 3360-820 Rev B 66cm Heavy-Duty Rear Bagger Lawn Mower Model No. 22200TE - 280000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number,
Auto Air Valve Parts List
Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat
Digital Inverter Generator Item No. BMi1000 Manufacturing No Replacement Parts List
Digital Inverter Generator Item No. BMi1000 Manufacturing No. 090930290 eplacement Parts List 991000574 5-2-15 (ev:01) OT INDUSTIES, INC. P.O. Box 35, Highway 8 Pickens, SC 2971 1-800-72-570 www.blackmaxtools.com
TEXTRON Lycoming AIRCRAFT ENGINES
TEXTRON Lycoming AIRCRAFT ENGINES O-60-AP Wide Cylinder Flange Crankcase Model Engines PARTS CATALOG PC-06-6 MARCH 99 0-60-AP PARTS CATALOG This illustrated parts catalog contains a complete parts listing
TECHNICAL INFORMATION RECALL ACE System Pipe Leak
RECALL ACE System Pipe Leak AFFECTED VEHICLE RANGE: Ref: Issue: 1 Date: 01/12/01 Discovery Series II (LT) YA261114 to YA263118 SITUATION: ACE HIGH-PRESSURE PIPE MISBUILD Some ACE high pressure supply pipes
** DO NOT EXCEED THE RECOMMENDED VEHICLE TOWING WEIGHT RATING ** DODGE RAM 1500
10/3/2017 DODGE RAM 1500 WARNING!! BRAKE, FUEL, AND ELECTRICAL LINES MAY NEED TO BE LOOSENED OR REPOSITIONED TO PROVIDE CLEARANCE FOR NEW HARDWARE. ON SHORT BED MODELS, CHECK FOR ADEQUATE TURNING CLEARANCE
SPARE PARTS BOOK. Rear Tandem Axle FRDP FRDP16S0879/011&013 Up to S/N (Nov 2004) Book No. 247 (2/2007)
SPARE PARTS BOOK Rear Tandem Axle ) Sisu Axles, Inc. Autotehtaantie 1 PO Box 19 FIN-101 Hameenlinna Finland Phone +35 20 55 99 Fax +35 20 55 00 2.2.2007 1 Axle L71 2 1 5 3 9 7 10 11 1 1 15 Breather 1 Breather
SETUP & INSTALLATION MANUAL FOR CAT308D CR EXCAVATOR BY
SETUP & INSTALLATION MANUAL FOR CAT308D CR EXCAVATOR BY 2012 Interlube Systems Ltd. UK IM 001 Issue 1 9/3/2012 Table of Contents Title: Page: Ports/Bearings Fitting and Lubrication Charts 3 HDI System
Parallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers