Tryton. Tool Services. People. Products. Performance. Canadian Locations

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Tryton. Tool Services. People. Products. Performance. Canadian Locations"

Transcription

1 Tool Services Canadian Locations Lloydminster - Corporate Office Street Lloydminster, AB T9V 3A7 Ph: (24hr) Brooks - Field Office 329-9th St. E Brooks, AB T1R OK2 Ph: (24hr) High Level - Field Office St. High Level, AB T0H 1Z0 Ph: (24hr) Whitecourt - Field Office Ave. Whitecourt, AB T7S 1N8 Ph: (24hr) Calgary - Sales/Marketing Office 1100, 250 2nd St. SW Calgary, AB T2P 0C1 Ph: Drayton Valley - Field Office St. Drayton Valley, AB T7A 0B2 Ph: Red Deer Field Office 1, th Ave. Red Deer, AB T4P 2B5 Ph: (24hr) Estevan, SK - Field Office #7, Highway 39 East Estevan, SK S4A 0W3 Ph: Edmonton - Warehouse/Inventory 1, 6404 Roper Rd. Edmonton, AB T6B 3P9 Ph: (24hr) Grande Prairie - Field Office 110, St. Clairmont, AB T0H 0W0 Ph: (24hr) Slave Lake - Field Office #301, Bay 1, Caribou Trail NW Slave Lake, AB T0G2A0 Ph: (24hr) United States Locations Houston, TX - Sales Office Suite SH 249 Houston, Texas Phone: (832) Oklahoma City, OK - Field Office 4600 S Council Rd Oklahoma City, OK Ph: Midland, TX - Field Office W County Rd 91 Midland, TX Ph: Seguin, TX - Field Office 3517 W US Hwy 90 Seguin, TX Ph: w w w. t r y t o n t o o l s e r v i c e s. c o m

2 Tryton OPEN HOLE REAMER The Tryton Open Hole Reamer is generally ran in order to dress out the open hole before installing Tryton Multi-Stage Frac Systems. The Reamer is a rigid heavy duty one-piece tool with 2 sets of 12 opposing tungsten carbide capped spiraled blades with an OD close to hole tolerances in order to best prepare the well bore ID properly before running tools. HEAVY DUTY ONE PIECE DESIGN 2 SETS OF 12 TUNGSTEN CARBIDE BLADES CLOSE OD TO OPEN HOLE TOLERANCE REAMER O.D. MIN TOOL I.D. THREAD CONNECTION in. mm in. mm in. mm /8 IF /2 IF /2 IF /2 IF FH /2 IF /2 IF 88.9 Other sizes may be available upon request

3 OPEN HOLE CENTRALIZER The Tryton Open Hole Centralizer is mainly used with Tryton Open Hole Packers, generally as part of the Tryton Multi-Stage Frac System. The Centralizer helps to protect the packers from damage during equipment installation in the open hole section of the well bore as well as helping to centralize the packers during the setting procedure. The Centralizer freely swivels to allow for rotation when running in the hole if required and has spiralled grooves to ensure good circulation. AVAILABLE IN COMPOSITE OR STEEL HELPS PREVENT RUNNING DAMAGE CENTRALIZES WHEN SETTING SWIVELS TO ALLOW FOR TOOL STRING ROTATION MAX OH TOOL SIZE CENTRALIZER O.D. in. mm in. mm

4 RSB-1 LINER HANGER/PACKER The Tryton RSB-1 Liner Hanger/Packer is designed to be ran in applications where short to long liner tailpipe assemblies are required. All load bearing parts are designed to withstand large tension loads which makes it ideal for both vertical and horizontal applications whereby the liner system is to be anchored in place. The bi-directional slip system prevents both upward and downward movement after the tool is set. The RSB-1 does not rely on setting string weight or tension as it is set completely with differential hydraulic pressure. The RSB-1 has both an upper seal bore in order to maximize the ID through the connected tubing string. The RSB-1 is hydraulically set using the RSB Hydraulic Setting Tool and has a field adjustable shear release. DESIGNED FOR BOTH VERTICAL AND HORIZONTAL APPLICATIONS INCORPORATES A BI-DIRECTIONAL CARBIDE SLIP SYSTEM PREVENTS BOTH UPWARD AND DOWNWARD MOVEMENT FULL BORE ID INTERNAL LOCKING MECHANISM FIELD ADJUSTABLE SHEAR RELEASE SETS WITH DIFFERENTIAL PRESSURE ONLY DESIGNED FOR HIGH TENSILE LOADS CASING SIZE CASING WEIGHT MAX TOOL O.D. MIN TOOL I.D. THREAD CONNECTION in. mm lbs/ft kg/m in. mm in. mm in. mm /2 LT&C /2 LT&C /2 LT&C 114.3

5 RSB HYDRAULIC SETTING TOOL The Tryton RSB Hydraulic Setting Tool was designed to set the RSB-1 Liner Hanger Packer either by itself or in conjunction with other equipment such as Tryton's horizontal Multi-Stage Frac system. In addition to the RSB-1 Liner Hanger Packer, the RSB Setting Tool can be customized to set any Seal Bore Packer When ran without a lower plugging device in the tailpipe a large internal by-pass allows fluid to enter the work string eliminating the need to fill the work string while running in the hole. If there is tailpipe assembly such as the Multi-Stage Frac system with some type of float shoe or other type of plugging device in place then it may be necessary to fill while running in the hole. Once on depth, field adjustable differential pressure is applied activating a hydraulic chamber stroking the RSB Setting Tool against the RSB-1 Liner Hanger Packer which engages the slips and energizes the elements. There is a secondary ball seat within the setting tool if required. Once the RSB-1 Liner Hanger Packer is set and tested the RSB setting tool is released with a combination of right hand rotation while holding tension. Ports between seals ensures drainage while tripping. LARGE INTERNAL BYPASS SECONDARY BALL SEAT SELF DRAINING WHEN PULLING OUT OF HOLE OPTIONAL SUPPLEMENTARY SETTING CHAMBERS FIELD ADJUSTABLE SETTING PRESSURE CAN BE CUSTOMIZED TO SET ANY SEAL BORE PACKER SETTING CHAMBER AREA BASE TOOL O.D. MAX TOOL I.D. THREAD CONNECTION Sq. In. Sq. cm in. mm in. mm in. mm /2 IF 88.9

6 RSB LATCH SEAL ASSEMBLY The Tryton RSB Latch Seal Assembly is designed to be used with either the RSB or the RSB-1 Packer. The RSB seal assembly incorporates heavy duty quadruple bonded seals and is ran on the tubing after the packer has been set. The latch mechanism engages automatically with set down weight and disengages with right hand rotation while pulling tension. PREVENTS BOTH UPWARD AND DOWNWARD MOVEMENT WHEN LATCHED HEAVY DUTY BONDED SEALS AVAILABLE WITH PREMIUM ELASTOMERS LARGE BORE ID AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS CASING SIZE SEAL BORE SIZE MAX TOOL O.D. MIN TOOL I.D. THREAD CONNECTION in. mm in. mm in. mm in. mm in. mm /2 EUE /2 LT&C 114.3

7 ISOPAC DUAL ELEMENT PACKER The Tryton IsoPac is a dual element packer that is designed to be run in either cased or open hole applications in vertical or horizontal wells. They can be ran as a single zone application packer or ran in conjunction with several packers in a multiple zone completion. Durable construction and reliability makes the IsoPac Packer an excellent alternative to using inflatable packers. The IsoPac Packers are hydraulically set with an internal locking mechanism providing a positive and reliable long term set and the outer components are locked to prevent premature setting. The setting pressure can be field adjusted with readily accessible setting shear screws. SINGLE ACTION SETTING PISTON OUTER COMPONENTS LOCKED TO PREVENT PREMATURE SETTING INTERNAL LOCKING MECHANISM FIELD ADJUSTABLE SETTING PRESSURE DESIGNED FOR CASED HOLE OR OPEN HOLE VERTICAL/HORIZONTAL APPLICATIONS AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS AVAILABLE WITH PREMIUM ELASTOMERS IsoPac OPEN HOLE SIZE MAX TOOL O.D. MAX TOOL I.D. THREAD CONNECTION in mm in. mm in. mm in. mm 4 3/ /8 EUE /8-6 1/ /2 LT&C /8-6 1/ /2 EUE /8-6 1/ /2 EUE /8-6 1/ /2 LT&C /8-6 1/ /2 LT&C / /2 LT&C / /2 LT&C 139.7

8 ISOPAC -I SINGLE ELEMENT PACKER The Tryton IsoPac -I is a lower cost single element alternative to the dual element IsoPac or IsoPac -II. The IsoPac -I is normally ran in conjunction with several open hole packers within the Tryton Multi- Stage Frac System in horizontal wells. However, it can be ran in vertical and cased wells if required. The IsoPac Packers are hydraulically set with an internal locking mechanism providing a positive and reliable long term set and the outer components are locked to prevent premature setting. The setting pressure can be field adjusted with readily accessible setting shear screws. SINGLE ACTION SETTING PISTON OUTER COMPONENTS LOCKED TO PREVENT PREMATURE SETTING INTERNAL LOCKING MECHANISM FIELD ADJUSTABLE SETTING PRESSURE DESIGNED FOR CASED HOLE OR OPEN HOLE VERTICAL/HORIZONTAL APPLICATIONS AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS AVAILABLE WITH PREMIUM ELASTOMERS OPEN HOLE SIZE MAX TOOL O.D. MIN TOOL I.D. THREAD CONNECTION in mm in. mm in. mm in. mm 6 1/8-6 1/ /2 LT&C 114.3

9 ISOPAC -II DUAL ELEMENT PACKER The Tryton IsoPac -II is a large bore dual element hydraulic set packer that is normally ran in conjunction with several open hole packers within the Tryton Multi-Stage Frac System in horizontal wells. However, it can be ran in vertical and cased wells if required. The IsoPac Packers are hydraulically set with an internal locking mechanism providing a positive and reliable long term set and the outer components are locked to prevent premature setting. The setting pressure can be field adjusted with readily accessible setting shear screws. SINGLE ACTION SETTING PISTON OUTER COMPONENTS LOCKED TO PREVENT PREMATURE SETTING INTERNAL LOCKING MECHANISM FIELD ADJUSTABLE SETTING PRESSURE DESIGNED FOR CASED HOLE OR OPEN HOLE VERTICAL/HORIZONTAL APPLICATIONS AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS AVAILABLE WITH PREMIUM ELASTOMERS OPEN HOLE SIZE MAX TOOL O.D. MIN TOOL I.D. THREAD CONNECTION in mm in. mm in. mm in. mm 6 1/8-6 1/ /2 LT&C 114.3

10 ANCHORPAC PACKER The Tryton AnchorPac Packer is designed to be run in either cased or open hole applications in vertical or horizontal wells. The AnchorPac can be ran as a single zone application packer or ran in conjunction with several packers in a multiple zone completion. The AnchorPac Packer incorporates a one piece bidirectional slip system in order to help prevent movement during higher pressure operations. Typically, on multiple zone horizontal open hole applications the AnchorPac would be used as the toe packer and/or the liner hanger packer. Durable construction and reliability makes the AnchorPac an excellent alternative to using inflatable packers. The AnchorPac is hydraulically set with an internal locking mechanism providing a positive and reliable long term set. The setting pressure can be field adjusted with readily accessible setting shear screws. The packer has a straight pull shear release which can also be readily adjusted in the field. SINGLE ACTION SETTING PISTON OUTER COMPONENTS LOCKED TO PREVENT PREMATURE SETTING INCORPORATES A BI-DIRECTIONAL SLIP SYSTEM INTERNAL LOCKING MECHANISM FIELD ADJUSTABLE SETTING PRESSURE FIELD ADJUSTABLE SHEAR RELEASE DESIGNED FOR CASED HOLE OR OPEN HOLE VERTICAL/HORIZONTAL APPLICATIONS AVAILABLE WITH CARBIDE SLIPS AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS AVAILABLE WITH PREMIUM ELASTOMERS OPEN HOLE SIZE MAX TOOL O.D. MAX TOOL I.D. THREAD CONNECTION in mm in. mm in. mm in. mm 5 7/8-6 1/ /2 LT&C /8-6 1/ /2 EUE /8-6 1/ /2 EUE /8-6 1/ /2 LT&C /8-6 1/ /2 LT&C / /2 LT&C 114.3

11 ANCHORPAC -II PACKER The Tryton AnchorPac -II Packer is designed to be run in either cased or open hole applications in vertical or horizontal wells. The AnchorPac -II can be ran as a single zone application packer or ran in conjunction with several packers in a multiple zone completion. The AnchorPac -II Packer incorporates a one piece bi-directional slip system in order to help prevent movement during higher pressure operations. Typically, on multiple zone horizontal open hole applications the AnchorPac -II would be used as the toe packer and/or the liner hanger packer. Durable construction and reliability makes the AnchorPac -II an excellent alternative to using inflatable packers. The AnchorPac is hydraulically set with an internal locking mechanism providing a positive and reliable long term set. The setting pressure can be field adjusted with readily accessible setting shear screws. The packer has a straight pull shear release which can also be readily adjusted in the field. SINGLE ACTION SETTING PISTON OUTER COMPONENTS LOCKED TO PREVENT PREMATURE SETTING INCORPORATES A BI-DIRECTIONAL SLIP SYSTEM INTERNAL LOCKING MECHANISM FIELD ADJUSTABLE SETTING PRESSURE FIELD ADJUSTABLE SHEAR RELEASE DESIGNED FOR CASED HOLE OR OPEN HOLE VERTICAL/HORIZONTAL APPLICATIONS AVAILABLE WITH CARBIDE SLIPS AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS AVAILABLE WITH PREMIUM ELASTOMERS OPEN HOLE SIZE MAX TOOL O.D. MAX TOOL I.D. THREAD CONNECTION in mm in. mm in. mm in. mm 6 1/8-6 1/ /2 LT&C 114.3

12 SWELLRIGHT PACKER The SwellRight Packer's standard swellable packer range is available as an oil or water swelling elastomer. This single element design uses a patent pending bonding process to provide high performance over short element lengths. SwellRight packers are available in wide range of sizes and utilize proprietary oil and water swell compounds. SIMPLE TO INSTALL STRONG AND DURABLE VERTICAL/HORIZONTAL APPLICATIONS AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS OIL AND WATER ACTIVATION AVAILABLE BASE PIPE O.D. ELEMENT O.D. HOLE SIZE ELEMENT LENGTH in. mm in. mm in. mm ft m , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & , 6 & , 1.8 & 3.0

13 FZR ON/OFF TOOL The Tryton FZR On/Off is an overshot type tubing disconnect/connect incorporating a J-slot that automatically engages on and disengages with a ¼ turn to the right at the tool. The FZR On/Off incorporates a proven and reliable quadruple bonded valve system which can be made out of various elastomeric materials as required. The FZR has a heavy duty 3 lug J-slot design to maximize the tensile loading capability and a full bore slick joint that allows for the largest possible ID available while maintaining a high pressure rating. A wireline profile can be cut in the slick joint if required. PROVEN BONDED SEAL SYSTEM RIGHT HAND RELEASE/LEFT HAND RELEASE 3 LUG J-SLOT DESIGN FOR HIGH TENSILE LOADING FULL BORE ID WIRELINE PROFILE CAN BE CUT IF REQUIRED AVAILABLE IN A WIDE RANGE OF MATERIALS & CONNECTIONS OPEN HOLE SIZE MAX TOOL O.D. MAX TOOL I.D. THREAD CONNECTION in. mm in. mm in. mm in. mm 6 1/8-6 1/ /2 EUE /8-6 1/ /2 LT&C Common Sizes shown above, other sizes are available upon request Length and OD may vary if special threads are used

14 HYDROPORT FRAC SLEEVE The Tryton HydroPort frac sleeves are designed for use when selectively stimulating multiple zones in either open or cased hole applications. The HydroPort can be used in either horizontal or vertical wells and is usually the first valve ran in the well accompanied by multiple IsoPort frac sleeves. The HydroPort frac sleeve is hydraulically opened and an internal locking mechanism ensures the open position is securely maintained. The HydroPort frac sleeve is activated by field adjustable differential pressure from inside the sleeve across the actuation ports either by a plugging device below, usually being the ball seat circulating sub. Once open, the sleeves have an internal locking mechanism to ensure the open position is securely maintained. INTERNAL LOCKING MECHANISM FIELD ADJUSTABLE OPENING PRESSURE FULL BORE ID SUITABLE FOR HIGH PRESSURE APPLICATIONS DESIGNED FOR BOTH HORIZONTAL AND VERTICAL APPLICATIONS DESIGNED FOR MULTIPLE ZONE APPLICATIONS AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS MAX BODY O.D. MAX TOOL I.D. THREAD CONNECTION in. mm in. mm in. mm /8 EUE /2 LT&C /2 EUE /2 LT&C /2 LT&C 139.7

15 HYDROPORT -C FRAC SLEEVE The Tryton HydroPort -C is a large bore frac sleeve designed to be the toe sleeve on a cemented-in liner system either as part of one of Tryton s cemented-in systems or part of a plug and perf frac system. The HydroPort -C frac sleeve is activated by an adjustable differential pressure from inside the sleeve across an atmospheric chamber within the sleeve whereby only the hydrostatic pressure plus the applied pressure is considered. Once open, the sleeve has an internal locking mechanism to ensure the open position is securely maintained. The HydroPort -C has various versions available depending upon what pressure rating is required. WIDE RANGE OF OPENING PRESSURES AVAILABLE LARGE BORE ID INTERNAL LOCKING MECHANISM SUITABLE FOR HIGH PRESSURE APPLICATIONS SUITABLE FOR HIGH TEMPERATURE APPLICATIONS AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS TOOL VERSION AND SIZE OD ID DESIGNED OPENING PRESSURE RECOMMENDED MAX. BURST PRESSURE in. mm in. mm in. mm psi Mpa psi mpa 4 1/2 HydroPort -C , , /2 HydroPort -C2 4 1/2 HydroPort -C3 5 1/2 HydroPort -C1 5 1/2 HydroPort -C2 5 1/2 HydroPort -C , , , , , , , , , ,

16 ISOPORT FRAC SLEEVE The Tryton IsoPort frac sleeve is designed for selectively stimulating multiple zones in either open or cased hole applications. The IsoPort can be used in either vertical or horizontal wells usually in conjunction with the HydroPort frac sleeve and IsoPac /AnchorPac Packers. The IsoPort frac sleeve is activated by circulating a ball into a drillable seat inside the tool. Applied differential pressure from above the ball seat shifts the internal piston downward opening up the frac ports. The IsoPort has an internal locking mechanism keeping the piston locked securely into place after it has been shifted. The standard IsoPort piston is made out of a easily drillable material. INTERNAL LOCKING MECHANISM FIELD ADJUSTABLE SETTING PRESSURE SUITABLE FOR HIGH PRESSURE APPLICATIONS DESIGNED FOR HORIZONTAL AND VERTICAL APPLICATIONS DESIGNED FOR MULTIPLE ZONE APPLICATIONS EASILY DRILLABLE BALL SEAT AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS CLOSEABLE OPTION AVAILABLE MAX TOOL O.D. MAX TOOL I.D. THREAD CONNECTION in. mm in. mm in. (mm) /8 (73.0 mm) EUE /2 (88.9 mm) EUE /2 (114.3 mm) LT&C /2 (139.7 mm) LT&C

17 ISOPORT -C FRAC SLEEVE The Tryton IsoPort -C frac sleeve is designed for selectively stimulating multiple zones in a cemented-in liner system. The IsoPort -C is used in conjunction with the toe frac HydroPort -C sleeve and is activated by circulating a ball into a millable seat inside the tool. Applied differential pressure from above the ball seat shifts the internal piston downward opening up the frac ports. The IsoPort -C has an internal locking mechanism keeping the piston locked securely into place after it has been shifted. INTERNAL LOCKING MECHANISM SUITABLE FOR HIGH PRESSURE APPLICATIONS DESIGNED FOR MULTIPLE ZONE APPLICATIONS EASILY MILLABLE BALL SEAT AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS MAX TOOL O.D. MAX TOOL I.D. THREAD CONNECTION in. mm in. mm in. (mm) /2 (114.3 mm) LT&C /2 (139.7 mm) LT&C

18 GATEWAY ISO-PORT FRAC SLEEVE The Tryton Gateway Iso-Port Frac Sleeve has all the proven features of the conventional Tryton Iso-Port with the additional benefit of selective zone isolation. The Gateway is ran as part of the conventional Multi- Stage Frac system and after the sleeve is opened utilizing ball drop technology, the piston can then be drilled out and the sleeve can be closed/opened using the activation tool on coil. INTERNAL LOCKING MECHANISM FIELD ADJUSTABLE SETTING PRESSURE DESIGNED FOR MULTIPLE ZONE APPLICATIONS CAN BE CLOSED/OPENED WITH COIL RAN ACTIVATION TOOL MAX TOOL O.D. MIN TOOL I.D. THREAD CONNECTIONS in. mm in. mm in. mm /2 LT&C /2 LT&C /2 LT&C 139.7

19 BALL SEAT CIRCULATING SUB The Tryton Ball Seat Circulating Sub is designed to be a reliable closeable circulation port generally ran at the bottom of a tool string in either cased or open hole for vertical or horizontal well completions. Once the tool string is in place and the required circulation operation is complete a ball is circulated onto the seat, an adjustable pre-determined pressure is applied and an internal sleeve shifts downwards which closes the internal circulating ports. Once the sleeve has been shifted a positive locking mechanism ensures it is securely maintained in place. Standard ball sizes are 0.75" (19.05mm) and 1.00" (25.40mm) but can be customized if required. INTERNAL SECURE LOCKING MECHANISM ADJUSTABLE CLOSING PRESSURE DESIGNED FOR BOTH HORIZONTAL AND VERTICAL APPLICATIONS DESIGNED FOR BOTH CASED AND OPEN HOLE APPLICATIONS AVAILABLE IN A WIDE RANGE OF MATERIALS AND CONNECTIONS MAX TOOL O.D. THREAD CONNECTION in. mm in. mm /8 EUE /2 EUE /2 LT&C /2 LT&C 139.7

20 VIKING FRAC SLEEVE/ACTUATION TOOL The Tryton Viking Frac Sleeve is designed for selectively stimulating multiple zones in either vertical or horizontal wells. The Viking Frac Sleeve can either be ran in conjunction with Tryton open hole packers or be cemented in the well bore. As many sleeves as required can be ran and each sleeve opens independently utilizing the Tryton Viking Actuation Tool on coil tubing. Using the Viking system, the frac can be pumped down the ID of the coil or the coil annulus. The Tryton Viking Actuation Tool utilizes a continuous J-slot to activate the locator keys for positive locating and anchoring into each sleeve. Each sleeve is independently opened upon reaching a preset field adjustable differential pressure from inside the sleeve. After stimulation, the coil is picked up, opening the unloader valve, resetting the tool to the running position and moved up to the next sleeve. INTERNAL LOCKING MECHANISM FIELD ADJUSTABLE OPENING PRESSURE CAN BE USED IN CONJUNCTION WITH OPEN HOLE PACKERS OR CEMENTED IN PLACE DESIGNED FOR MULTIPLE ZONE APPLICATIONS NO LIMIT ON THE NUMBER OF SLEEVES RAN FULL BORE ID ACTUATION TOOL UTILIZES SIMPLE DESIGN WITH HEAVY DUTY REINFORCED CUP FOR DURABILITY AND EFFICIENCY CAN BE PUMPED DOWN THE COIL ID OR COIL ANNULUS MAX BODY O.D. MAX FIN O.D. MIN TOOL ID THREAD CONNECTIONS in. mm in m in. mm in. mm /2 LT&C /2 LT&C 139.7

21 TLT FRAC TOOL The TLT Frac Tool is designed for stimulating isolated zones within cased vertical or horizontal well bores utilizing coil tubing. Quicker running speeds can be achieved even when moving through fluid or live wells due to an innovative fluid bypass. When moving up-hole the valve shuts providing a closed system isolating the target zone and containing fluids/proppants from all previously stimulated lower zones. The top end of the TLT tool incorporates a coil tubing field adjustable shear release. The TLT can be used in conjunction with the Tryton FB/CFB HydroPorts or any other similar frac port type systems such as other types of frac sleeves, burst disks or perforations. STIMULATION OF MULTI-ZONE WELLBORES - NEW & RECOMPLETIONS FUNCTIONS IN VERTICAL, DEVIATED, OR HORIZONTAL WELLS CAN BE USED WITH A WIDE RANGE OF FRAC PORT SYSTEMS RAPID DEPLOYMENT THROUGH FLUID FILLED WELLBORES SINGLE CUP ASSEMBLY AVAILABLE LARGE BORE FIELD ADJUSTABLE COIL TUBING SHEAR RELEASE CASING SIZE CASING WEIGHT THIMBLE O.D. MIN I.D. THREAD CONNECTION in. mm lbs/ft kg/m in. mm in. mm in. mm 4 1/ /8 EUE / /8 EUE / /8 EUE 60.3

22 MAXFRAC PLUG The Tryton MaxFrac Plug is a high pressure flow through ball and seat plug designed to be used in plug and perf operations or other operations where multiple plugs are required. The MaxFrac has a large bore ID and when the Tryton Phantom Dissolvable Balls are used, it isn t necessary to drill the plug out. However, the plug incorporates only a compression slip making it readily retrievable if required. HIGH PRESSURE BOTTOM SET LARGE BORE ID NO NEED TO DRILL OUT SINGLE COMPRESSION SLIP ONLY SIZE O.D. I.D. LENGT H PRESSURE RATING BALL SIZE in. mm in. mm in. mm in. mm psi Mpa in. mm 4 1/2 MaxFrac -A , /2 MaxFrac -B , MaxFrac -A , /2 MaxFrac -A , /2 MaxFrac -B , /2 MaxFrac -C , /2 MaxFrac -D ,

23 TGW CUP PACKER The Tryton TGW Cup Packer is available in a single or double cup design. The primary use is for isolating casing and tubing leaks. The packer cups can be installed in any direction allowing each assembly to hold pressure in both directions if required. AVAILABLE IN SINGLE OR DOUBLE ELEMENT DESIGN COMPACT & INEXPENSIVE MEANS OF ISOLATION WIRE REINFORCED CUPS FOR DURABILITY CASING SIZE THREAD CONNECTIONS CASING WEIGHT MAX O.D. MIN I.D. in. mm in. mm lbs/ft. kg/m in. mm in. mm 4 1/ /8 EUE / /8 EUE /8 EUE /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE /8 EUE /8 EUE /8 EUE Common sizes above, other sizes may be available if required

24 TENSION PACKER The Tryton Tension Packer is a compact, economical, retrievable packer. Primarily used in water flood applications, this packer can also be used for production and/or lower-medium pressure treating operations. Since the packer is tension set, it is ideally suited for shallow wells where set-down weight is not available. Various configurations of the Tryton Tension Packer are available including an endless J-slot version as well as alternate shear options. SIMPLE LOW COST PACKER FOR FLUID INJECTION ENDLESS J-SLOT AVAILABLE ALTERNATIVE SHEAR RELEASE AVAILABLE CASING PACKER O.D. WEIGHT MIN. I.D. MAX I.D. MAX O.D. THREAD CONNECTION in. mm lbs/ft kg/m in. mm in. mm in. mm in. mm 4 1/ /8 EUE /8 EUE /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE /8 EUE /8 EUE /8 EUE /8 EUE /8 EUE 73.0 Common sizes above, other sizes may be available if required

25 TS-3 SINGLE GRIP COMPRESSION PACKER The TS-3 Single Grip Packer is a single-grip, compression-set, retrievable mechanical production packer that is suitable for most production, stimulation and testing operations. The field proven large bore design allows unrestricted fluid flow and wireline operations through the tubing. The TS-3 also incorporates an internal bypass to prevent swabbing when running and retrieving. NORMALLY RH COMPRESSION SET, STRAIGHT PICK-UP RELEASE OPTIONAL J-SLOT CONFIGURATIONS LARGE BYPASS FOR RUNNING, RETRIEVING AND EQUALIZING AVAILABLE WITH BOTH LONG AND SHORT STROKE MANDRELS CASING SIZE CASING WEIGHT O.D. OF TOOL THREAD CONNECTIONS in. mm lbs/ft kg/m in. mm in. mm 4 1/ /8 EUE / /8 EUE /8 EUE /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE /8 EUE /8 EUE 73.0

26 TS-4 DOUBLE GRIP COMPRESSION PACKER The Tryton TS-4 Double Grip Compression Set Packer is used for production, stimulation and testing. The mechanical upper hold down system reduces the cost and maintenance of a button type hydraulic hold down system. The TS-4 is equipped with a running bypass that reduces swabbing. Set down weight closes the bypass valve, sets the upper/lower slips and energizes the packing elements. The closed bypass valve activates the pressure balanced hold down system. Internal pressure from below the elements aids in holding the bypass valve closed and preventing upward movement of the tubing string. To set, run the tool to setting depth, pick up tubing and rotate to the right ¼ turn at the packer. Tubing weight is applied, which sets the lower slips, closes the bypass valve and expands the packing elements. To release, raise the tubing, which first opens the bypass valve, then releases the slips and packing elements. NORMALLY RIGHT HAND COMPRESSION SET, STRAIGHT PICK-UP RELEASE NO HYDRAULIC HOLD DOWN BUTTONS BUILT IN UNLOADER WASHES DEBRIS FROM WHEN RETRIEVING SEQUENTIAL RELEASE UPPER SLIP SYSTEM AVAILABLE IN AUTOMATIC AND MANUAL JAY CONFIGURATIONS CASING SIZE CASING WEIGHT THREAD CONNECTION MAX O.D. MIN I.D. in. mm lbs/ft kg/m in. mm in. mm in. mm 2 7/ EUE / NUE / /8 EUE /8 EUE /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE /8 EUE /8 EUE Common sizes above, other sizes may be available if required

27 SNAPSET COMPRESSION SET ISOLATION PACKERS The Tryton Snapset Compression Set Isolation Packers are used in multi-zone completions. The Snapset Packers set in compression with a lower anchor style packer below. The collet in the lower end of the tool shifts at a pre-determined value to energize the packing elements and set the upper slips. To release, straight pick-up on the tubing string is required. The Snapset I has no slips, the Snapset II has a tension slip only and the Snapset III has a compression slip only. The application and operational requirements will determine which is the best Snapset to use. COMPENSATING PISTON HOLD DOWN SYSTEM RUNNING BYPASS/EQUALIZING SYSTEM KEYED FOR ROTATION THRU PACKER INTERNAL COLLET TO PREVENT PRE-SET SEQUENTIAL RELEASE SLIP SYSTEM CASING SIZE CASING WEIGHT THREAD CONNECTION MAX. O.D. MIN I.D. in. mm lbs/ft kg/m in. mm in. mm in. mm SNAPSET I 2 7/ EUE EUE / EUE / /8 EUE / /8 EUE /8 EUE /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE /8 EUE / /8 EUE / /8 EUE /8 EUE /8 EUE /8 EUE / /8 EUE / /8 EUE / /8 EUE Common sizes above, other sizes may be available if required SNAPSET II SNAPSET III

28 THI HYDRAULIC ISOLATION PACKER The Tryton THI Hydraulic Isolation Packer is a hydraulic set, single string tandem packer used in multiple zone wells. The THI Hydraulic Isolation Packer is generally used as the lower/middle packer(s) in multiple zone applications. ECONOMICAL EASILY ADJUSTABLE SET AND RELEASE SHEAR SCREWS COMPACT DESIGN CAN BE USED IN OPEN HOLE CASING SIZE CASING WEIGHT TUBING SIZE MAX O.D. MIN I.D. in. mm lbs/ft kg/m in. mm in. mm in. mm 4 1/ /8 EUE /8 EUE /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE /8 EUE /8 EUE

29 HYDRO-CT PACKER The Tryton Hydro-CT Packer can be ran either on jointed pipe utilizing a conventional rig or rigless application using coil tubing. The Hydro-CT can be ran alone or in tandem for testing, production, water shut-off or zonal isolation in either vertical or horizontal wells. The Hydro-CT is hydraulically set with an internal locking mechanism providing a positive and reliable long-term pack-off. Both durable construction and compact size makes the Hydro-CT Packer an excellent alternative to conventional hydraulic packers in shallower wells. The Hydro-CT is released by dropping a ball onto an internal seat then pressure above causes the releasing pins to shear and the packer to release. INTERNAL LOCKING MECHANISM FIELD ADJUSTABLE SETTING PRESSURE FIELD ADJUSTABLE SHEAR RELEASE RELEASING MECHANISM INDEPENDENT OF SETTING MECHANISM CAN BE RAN IN SINGLE OR MULTIPLE PACKER APPLICATIONS CAN BE USED IN CONJUNCTION WITH OTHER COMPLETION TOOLS SUITED FOR BOTH VERTICAL AND HORIZONTAL APPLICATIONS CASING SIZE CASING WEIGHT TUBING SIZE MAX O.D. MIN I.D. in. mm lbs/ft kg/m in. mm in. mm in. mm 4 1/ /8 EUE Common sizes above, other sizes may be available if required

30 TI-1 INFLATABLE SINGLE SET PACKER The Tryton TI-1 Inflatable Single Set Packer is normally used in open hole for isolating zones or in casing whereby a restriction needs to be passed through and can be used for testing, treating, production or injection. The TI-1 is a hydraulically set single use packer that may be used in both vertical or horizontal wells. After the TI-1 is set an internal locking sleeve maintains inflation. The packer comes in both rotational or straight pull release. The TI-1 packer element incorporates high strength cable to provide good expansion characteristics in washed out or irregular well bores, as well as to provide high differential pressure capabilities. After the packer is released, the elements are designed to return very close to the original run-in diameter. The elements are less likely to lose rubber down hole because superior bonding occurs between the rubber and cable rather than just rubber alone. AVAILABLE IN TENSION OR ROTATIONAL RELEASE MODELS INTERNAL SLEEVE MAINTAINS INFLATION IN PACKER PRESSURE ACROSS ELEMENT IS FULLY EQUALIZED WHEN UNSETTING HEAVY DUTY CABLE RE-INFORCED ELEMENT DIFFERENT ELASTOMER COMPOUNDS AVAILABLE FOR HPHT AVAILABLE IN A VARIETY OF MATERIALS AND CONNECTIONS ELEMENT O.D. MIN. TOOL I.D. THREAD CONNECTIONS in. mm in. mm in. mm /8 EUE /8 EUE /8 EUE /8 EUE 73.0 Common sizes above, other sizes may be available if required

31 HYDRO-GRIP II HYDRAULIC SET PACKER The Tryton Hydro-Grip II hydraulic set packer is a compact 2 elemetn single string pressure activated double grip production packer, used in single or multi zone completions. The Hydro-GripII Packer is ideally suited for applications where it is desired to set the packer(s) after the well is flanged up or for multiple zone completions. The Hydro-Grip II Packer incorporates a pressure balance system which helps compensate for pressure differentials across the packer. The 2 element cup type system is a more compact packer in comparison to the Hydro-Grip III. RUNNING BYPASS RELEASE EQUALIZING SYSTEM PRESSURE BALANCED SYSTEM STRAIGHT PULL RELEASE FIELD ADJUSTABLE SETTING PRESSURE FIELD ADJUSTABLE RELEASING SHEAR CASING SIZE CASING WEIGHT THREAD CONNECTION MAX O.D. MIN I.D. in. mm lbs/ft kg/m in. mm in. mm in. mm 4 1/ /8 EUE / /8 EUE / /8 EUE /8 EUE /8 EUE Common sizes above, other sizes may be available if required

32 TI-2 INFLATABLE MULTI-SET PACKER The TI-2 Inflatable Multi-Set Packer is used for isolating zones in open-hole or in casing. The tool is re-settable and may be used for testing, treating, production, or stimulation of several zones with each trip into the well. The TI-2 incorporates a durable rugged design for reliable multiple sets in the same trip. The TI-2 Packer may be used in vertical, deviated or horizontal wells. No rotation is required to set the packer, however right-hand rotation is required to unset the packer. Once the TI-2 is released it can be moved and re-set by dropping a dart into a seat whereby the element can be re-inflated. The dart is then be pumped through to a catcher and the procedure can be repeated. CABLE REINFORCED ELEMENTS EXPOSED CABLE ELEMENT AVAILABLE FOR CASED HOLES RIGHT-HAND TURN RELEASE USES SEATS AND DARTS TO RE-SET DIFFERENT ELASTOMER COMPOUNDS AVAILABLE FOR HPHT AVAILABLE IN A VARIETY OF MATERIALS AND CONNECTIONS ELEMENT O.D. MIN. TOOL I.D. THREAD CONNECTIONS in. mm in. mm in. mm /8 EUE /8 EUE 73.0 Common sizes above, other sizes may be available if required

33 HYDRO-GRIP III HYDRAULIC SET PACKER The Tryton Hydro-Grip III hydraulic set packer is a 3 element single string pressure activated double grip production packer used in single or multi zone completions. The Hydro-Grip III Packer is ideally suited for applications where it is desired to set the packer(s) after the well is flanged up or for multiple zone completions. The Hydro-Grip III Packer incorporates a pressure balance system which helps compensate for pressure differentials across the packer. RUNNING BYPASS RELEASE EQUALIZING SYSTEM PRESSURE BALANCED SYSTEM STRAIGHT PULL RELEASE FIELD ADJUSTABLE SETTING PRESSURE FIELD ADJUSTABLE RELEASING SHEAR CASING SIZE CASING WEIGHT THREAD CONNECTION MAX O.D. MIN I.D. in. mm lbs/ft kg/m in. mm in. mm in. mm 4 1/ /8 EUE / /8 EUE /8 EUE /8 EUE / /8 EUE / /8 EUE / /8 EUE / /8 EUE /8 EUE / /8 EUE / /8 EUE / /2 EUE / /2 EUE /8 EUE /8 EUE /8 EUE /2 EUE /2 EUE / /8 EUE / /8 EUE / /2 EUE / /2 EUE / /2 EUE / /2 EUE / /2 EUE Common sizes above, other sizes may be available if required

34 TD-2 DUAL STRING PRODUCTION PACKER The TD-2 Dual String Packer is a hydraulic set, mechanically held dual string production packer run above a single string hydraulic set or wireline set seal bore packer. Its short length makes it ideal for deviated wells or doglegs. Because no tubing manipulation is required to set this packer, the well head can be installed and flanged up before setting. It is available with short string or long string setting capabilities and a variety of tubing connections. It is also adaptable for submersible pump applications. The TD-2 features a sequential upper slip release system designed to release each slip individually reducing the pull required to release the packer. Due to the angles on the upper slips and upper slip cage, slips release smoothly from the casing. CASING LONG STRING CONNECTIONS SHORT STRING CONNECTIONS TOOL O.D. SIZE WEIGHT BOX UP/PIN DOWN MANDREL I.D. BOX UP/PIN DOWN MANDREL I.D. in. mm lbs/ft kg/m in. mm in. mm in. mm in. mm in. mm 5 1/ EUE EUE /8 EUE /8 EUE /8 EUE EUE /8 EUE /8 EUE /8 EUE EUE /8 EUE /8 EUE / /8 EUE /8 EUE / /2 EUE /8 EUE / /8 EUE /8 EUE / /2 EUE EUE / /2 EUE /8 EUE / /2 EUE /8 EUE / /2 EUE /2 EUE / /2 EUE EUE / /2 EUE /8 EUE / /2 EUE /8 EUE / /2 EUE /2 EUE / /2 EUE EUE / /2 EUE EUE / /2 EUE /8 EUE / /2 EUE /8 EUE / /2 EUE /2 EUE

35 TX-6/TX-6W DOUBLE GRIP RETRIEVABLE PACKER The Tryton TX-6/TX-6W are lower pressure single string double grip retrievable production packers that hold pressure from above and below. Once set, the TX-6/TX- 6W can be left in tension, compression or neutral. Incorporated into the design is an internal bypass system that along with fluid by pass while running, equalizes pressure before the upper slips are pulled from the casing wall. The TX-6/TX-6W Packers are designed for production, testing, zone isolation and injection applications. The TX-6 sets with a 1/4 right hand turn at the packer and releases with a 1/4 right hand turn, then straight pick up. The TX-6W sets on wireline and releases with a 1/4 right hand turn at the packer then straight pick-up. The TX-6 can be re-set multiple times whereby once the TX-6W is released it cannot be re-set in the standard configuration. TUBING, WIRELINE OR HYDRAULIC SET ON TUBING CAN BE PACKED -OFF WITH EITHER TENSION OR COMPRESSION QUARTER TURN TO RIGHT TO SET AND RELEASE OPTIONAL LH J-SLOT AVAILABLE COMPATIBLE WITH A WIDE VARIETY OF TRYTON PACKER ACCESSORIES CASING SIZE CASING WEIGHT TUBING SIZE MAX O.D. MIN I.D. in. mm lbs/ft kg/m in. mm in. mm in. mm 4 1/ /8 EUE WIRELINE SET TUBING SET MODE 5 1/ /8 EUE / /8 EUE /8 EUE /8 EUE /8 EUE /2 EUE /2 EUE /2 EUE / /2 EUE / /2 EUE / /2 EUE Common sizes above, other sizes may be available if required

Drilling & Down-hole Completion Tools

Drilling & Down-hole Completion Tools HYDRAULIC SET PRODUCTION PACKER MODEL: WC-HP-1 & WC-HPL-1[Large Bore] PRODUCT No.: WC-20101 & WC-20112 HP-1 is an industry standard, fully hydrostatic, hydraulic set and shear release single string retrievable

More information

Set, seal, and retrieve with confidence. Packers Catalog

Set, seal, and retrieve with confidence. Packers Catalog Set, seal, and retrieve with confidence Packers Catalog 1 2 Table of Contents Conventional Packers...05 ESP/Dual Completion Packers...35 High-Rate-Gas Packers...43 HPHT Packers...47 Intelligent Completion

More information

SAPEX OIL TOOLS LTD. DOWNHOLE COMPLETIONS PACKERS & COMPLETION EQUIPMENT WORKOVER & COMPLETION SERVICE TOOLS PRODUCTS, APPLICATIONS & SPECIFICATIONS

SAPEX OIL TOOLS LTD. DOWNHOLE COMPLETIONS PACKERS & COMPLETION EQUIPMENT WORKOVER & COMPLETION SERVICE TOOLS PRODUCTS, APPLICATIONS & SPECIFICATIONS PRODUCTS, APPLICATIONS & SPECIFICATIONS TOMORROW S TECHNOLOGY FOR TODAY S ENERGY WHO ARE WE? We are an independent International Oilfield Service Company, offering 24-Hour Drilling, Completion and Work-over

More information

MESQUITE OIL TOOLS, INC. PRODUCT CATALOG

MESQUITE OIL TOOLS, INC. PRODUCT CATALOG MESQUITE PRODUCT CATALOG MESQUITE Mesquite Oil Tools, Inc. 8007 West Industrial Midland, TX 79706 Mesquite Oil Tools, Inc. P.O. Box 668 Snyder, TX 79550 Jerry Pechacek CEO Justin Pechacek President Office

More information

TMK QUANTUM Infinity. Unlimited Stage Fracturing System COMPLETIONS

TMK QUANTUM Infinity. Unlimited Stage Fracturing System COMPLETIONS TMK QUANTUM Infinity Unlimited Stage Fracturing System COMPLETIONS TMK QUANTUM Infinity TMK QUANTUM Infinity ball-actuated sliding sleeve system utilizes a revolutionary, patent pending electronic counter

More information

Downhole Tools Worldwide.

Downhole Tools Worldwide. Downhole s Worldwide. INFLATABLES PRODUCTION PACKER SEV-SET PACKER THRU TUBING PACKER CASING PACKER STRADDLE PACKER HYDRAULIC DISCONNECT ON-OFF SEAL Table of Contents 1-1 1-2 1-3 1-4 1-5 1-6 1-7 TechWest

More information

TCI DUAL QUARTER ANCHOR CATCHER (TDQAC)

TCI DUAL QUARTER ANCHOR CATCHER (TDQAC) TCI DUAL QUARTER ANCHOR CATCHER (TDQAC) The TQDA is a rugged anchor-catcher that operates with minimum (less than a 1/4 turn) tubing string rotation to set or release. The no torque option resists right

More information

ULTIMATE DRILLING JARS

ULTIMATE DRILLING JARS ULTIMATE DRILLING JARS Dramatically increase the allowable overpull force and leave your competition in the dust. ULTIMATE DOUBLE ACTING HYDRAULIC DRILLING JAR The advantage of the Ultimate Double Acting

More information

The Well Commander Mitigate drilling hazards with the industry s most versatile drilling valve. Todd Gooding Business Development Manager

The Well Commander Mitigate drilling hazards with the industry s most versatile drilling valve. Todd Gooding Business Development Manager The Well Commander Mitigate drilling hazards with the industry s most versatile drilling valve Todd Gooding Business Development Manager WELL COMMANDER A COMPLETE redesign of the ball-activated Centurion

More information

GT GAS-TIGHT SERIES ELIMINATOR. Addressing your wellbore isolation and cement needs through an ISO V0-rated stage-cementing package

GT GAS-TIGHT SERIES ELIMINATOR. Addressing your wellbore isolation and cement needs through an ISO V0-rated stage-cementing package WELL CONSTRUCTION ELIMINATOR GT GAS-TIGHT SERIES Addressing your wellbore isolation and cement needs through an ISO 14998 V0-rated stage-cementing package DRILLING & FORMATION EVALUATION WELL CONSTRUCTION

More information

The CIG is designed to fit any size of API rod insert pump.

The CIG is designed to fit any size of API rod insert pump. Carbide Insert Guide (CIG) Carbide Insert Guide (CIG) The installation of the Carbide Insert Guide (CIG) will eliminate the possibility of your rod insert pump problems of broken or severely worn holdown

More information

Subsurface Flow Controls

Subsurface Flow Controls Subsurface Flow Controls Subsurface Flow Controls Landing Nipples X, R, RPT, FBN Lock Mandrels and accessories Nippleless Tubing Plugs - Mirage plug, Monolock DuraSleeve Sliding Side-Door circulating device

More information

Health, Safety and Environment: Product Performance: Proven Quality: Presence: Client Focus: Tried and Tested:

Health, Safety and Environment: Product Performance: Proven Quality: Presence: Client Focus: Tried and Tested: Wenzel Downhole Tools is the leading motor and drilling tool supplier, with worldwide operations supporting the oilfield and construction industries. Wenzel s capability to engineer, manufacture and service

More information

Intervention Barriers

Intervention Barriers Intervention Barriers A barrier is defined as a means of containing wellbore pressure and fluids. Two effective barriers are required for most intervention operations. Consider when barriers are effective

More information

Completion Systems & Mechanical Products

Completion Systems & Mechanical Products Completion Systems & Mechanical Products ESP Dual Systems ESP Encapsulation (CAN / POD) ESP Bypass Systems performance with reliability Tubing String Products Redundancy Y-Tool - Single ESP System As the

More information

PACKER MILLING & RETRIEVAL SYSTEMS

PACKER MILLING & RETRIEVAL SYSTEMS Sir William Smith Road, Kirkton Industrial Estate, Arbroath, Angus, Scotland, U.K. DD11 3RD Tel: +44 (0) 1241 877776 Fax: +44 (0) 1241 871037 E-mail: sales@pioneeroiltools.com Website: www.pioneeroiltools.com

More information

MANUFACTURING. PD Impact Tools

MANUFACTURING. PD Impact Tools PD Impact Tools Upper Connector MANUFACTURING Drive Mandrel Female Spline Bearing Female Spline PD Impact Tools optimize your drilling operations. Knocker Housing Knocker Pressure Piston Hydraulic Mandrel

More information

THRU TUBING TOOLS CATALOG

THRU TUBING TOOLS CATALOG THRU TUBING TOOLS CATALOG NOV Downhole is the largest independent downhole tool and equipment provider in the world. We have the expertise to optimize BHA selection and performance, supporting over 150

More information

Oilfield Service and Distribution Products

Oilfield Service and Distribution Products Oilfield Hammer Unions Hammer Seal Swivel Joints Industrial Unions Non-Freeze Tank Valves Seal-O-Grip Oilfield Service and Distribution Products Issue Date 10/11/2013 www.kempervalve.com Sales: 800-231-2724

More information

Oiltools main product lines

Oiltools main product lines Archer Oiltools What we will cover The road from Seadrill to Archer The Well Company Services that Archer provide Archer s Global Footprint Archer Oiltools Global Footprint Archer Oiltools - What we do

More information

W E L L S I T E S E R V I C E S

W E L L S I T E S E R V I C E S WELL SITE SERVICES TABLE OF CONTENTS Frac Stack and Flow Control High Pressure Sand Removal System...FSFC-1a-d SPS Type 7 Manual and Hydraulic Frac Valve...FSFC-2a-b Frac Stacks...FSFC-3 High Pressure

More information

LEE NAK GUI TCP SERVICE COORDINATOR APPS

LEE NAK GUI TCP SERVICE COORDINATOR APPS Live Well Deployment System LEE NAK GUI TCP SERVICE COORDINATOR Challenges Monobore completion High angle wells Long perforation intervals Underbalanced perforating (static or dynamic) Well control barriers

More information

WIF Categorization Exercise. Svein Inge Rafoss, Leading advisor well integrity completion and intervention, Statoil

WIF Categorization Exercise. Svein Inge Rafoss, Leading advisor well integrity completion and intervention, Statoil WIF Categorization Exercise Svein Inge Rafoss, Leading advisor well integrity completion and intervention, Statoil WIF Well Integrity Workshop, May 26, 2011 Category Principles & Colours Category Principle

More information

Pipe Recovery Equipment

Pipe Recovery Equipment Pipe Recovery Equipment Jet Research Center offers a variety of field-proven, reliable pipe recovery equipment to satisfy the high demands in the oilfield industry. The equipment supplied by JRC undergoes

More information

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

2- 20 (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly

More information

POWR Series. Performance and Steerable Drilling Motors

POWR Series. Performance and Steerable Drilling Motors POWR Series Performance and Steerable Drilling Motors Drilling Reliable. Innovative. Premium. We are proud of our products and their contribution to the downhole drilling and thru-tubing industries. Research

More information

ACE TUBING CUTTERS. Pressure Rating (psi) Explosive Weight (g) 2-3/8 CUT , D # - 5.

ACE TUBING CUTTERS. Pressure Rating (psi) Explosive Weight (g) 2-3/8 CUT , D # - 5. Recovery Tools ACE & Extended Range s provide a quick and effective solution to sever tubing in the removal of stuck pipe. These cutters utilize several technological improvements to allow them to cut

More information

High Pressure Type L Packer Type Casing Patches. Manual F635

High Pressure Type L Packer Type Casing Patches. Manual F635 High Pressure Type L Packer Type Casing Patches Manual F635 Contents Logan High Pressure Type L Packer Type Casing Patches Overview...2 Uses...2 Construction...2 Operation...3 To Engage a Fish...3 Salvaging

More information

Short Fast Strong.

Short Fast Strong. Short Fast Strong www.downholetechnology.com Designed and Manufactured for Speed and Reliability During Frac Operations Boss Hog frac plugs are short, fast and strong. More than 35,000 Boss Hog plugs have

More information

Rack & Pinion Pneumatic Actuators SPRING RETURN DOUBLE ACTING

Rack & Pinion Pneumatic Actuators SPRING RETURN DOUBLE ACTING Rack & Pinion Pneumatic Actuators SPRING RETURN DOUBLE ACTING Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing

More information

HYDRAULIC WORKOVER SERVICES

HYDRAULIC WORKOVER SERVICES HYDRAULIC WORKOVER SERVICES Technology at work for you. Cudd Energy Services (CES) offers a diversified portfolio of solutions for today s well challenges. From a simple completion job to a complex well

More information

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves

More information

- you succeed! We do Welcome to. Holland OilTech Services BV.

- you succeed! We do Welcome to. Holland OilTech Services BV. DRILL BITS WELL HEAD EQUIPMENT CASING / TUBING CASING HARDWARE LINER HANGER EQUIPMENT COMPLETION EQUIPMENT NOWAX SERVICES DRILL BITS WELL HEAD EQUIPMENT CASING / TUBING CASING HARDWARE LINER HANGER EQUIPMENT

More information

USA: Canada:

USA: Canada: TVS-ValveRepair@dnow.com TVS-ValveActuation@dnow.com WHO WE ARE DistributionNOW is focused on being your one-stop solution, and Total Valve Solutions (TVS) is a perfect example of this. From quality OEM

More information

2"- 20" (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES CELEBRATING. The High Performance Company

2- 20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES CELEBRATING. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2"- 20" (50mm-500mm) CELEBRATING Y E A R S The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality

More information

Coiled Tubing Solutions

Coiled Tubing Solutions E N H A N C I N G PRODUCTIVITY Coiled Tubing Solutions Solve Downhole Problems With Reliable, Cost-Effective Technology Baker Oil Tools Coiled Tubing Handbook The global oil and gas industry is using coiled

More information

C BOP. TC Cooper Cameron, Cameron Division

C BOP. TC Cooper Cameron, Cameron Division C BOP The Cameron C BOP was designed as an emergency safety head for snubbing coiled tubing workover applications. The main function of the C BOP is to shear whatever is in the hole - from braided cable

More information

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 1-20 (25mm-500mm) The High Performance Company SERIES 20 1-20 (25mm-500mm) Bray Controls is proud to offer a high quality

More information

Overshots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L

Overshots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated

More information

Hydro-Max Hydraulic Brake Booster and Master Cylinder. Technical Manual

Hydro-Max Hydraulic Brake Booster and Master Cylinder. Technical Manual Hydro-Max Hydraulic Brake Booster and Master Cylinder Technical Manual * 5+0 Important Service Notes The information in this publication was current at the time of printing. The information presented in

More information

DRILLING MOTOR HANDBOOK

DRILLING MOTOR HANDBOOK DRILLING MOTOR HANDBOOK GORILLA Drilling Motors TM rev213.6.19 DRILLING MOTOR HANDBOOK www.axonep.com The information contained in this handbook is for reference only. AXON Downhole Products Inc. does

More information

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

2- 20 (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly

More information

Well Test Products. Invention, Unique Design & Extraordinary Craftsmanship

Well Test Products. Invention, Unique Design & Extraordinary Craftsmanship Well Test Products TM Invention, Unique Design & Extraordinary Craftsmanship Subsea Intervention Systems Custom Design & Manufacture Wellheads & Christmas Trees Magnum Gate Valves Blow Out Preventers Manifold

More information

Motor Handbook. 4th Edition Ver. 1.0a ALL RIGHTS RESERVED. Issue Date; December 23, 2013 Wenzel Downhole Tools

Motor Handbook. 4th Edition Ver. 1.0a ALL RIGHTS RESERVED.  Issue Date; December 23, 2013 Wenzel Downhole Tools MOTOR HANDBOOK Motor Handbook 4th Edition Ver. 1.0a Issue Date; December 23, 2013 Wenzel Downhole Tools ALL RIGHTS RESERVED The information contained in this manual is provided for informational and illustration

More information

D and DL Annular Blowout Preventers

D and DL Annular Blowout Preventers D and DL Annular Blowout Preventers In the unique design of the Cameron DL Annular BOP, closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force

More information

About Cobra Downhole Motors

About Cobra Downhole Motors February 2016 1 About Cobra Downhole Motors Cobra Downhole Motors combines new material technology and innovative product features with a customer driven approach. We add value to our customers drilling

More information

Specialized Tools & Filtration. version 5

Specialized Tools & Filtration. version 5 version 5 Table of contents Specialized Tools 2 Liner Top Test Tools Well Commissioner (WC) 2 Casing Cleaning Tools Bristle Back Redressable 4 MultiBack (MBACK) 5 Heavy-Duty Razor Back (HDRB) 6 Razor

More information

Safety Valves. How Capillary is Integrated. Past and present. Agenda. Br oad Usage of Capillary Str ings

Safety Valves. How Capillary is Integrated. Past and present. Agenda. Br oad Usage of Capillary Str ings Agenda Broad usage by industry of capillary Tubing Retrievable Safety Valve W ells Can Now Receive A Micro String W ithout The Insertion Of A W ireline Insert Valve Or A W ork-over Re-cap of present technologies

More information

Crown Actuated Valves & Controls

Crown Actuated Valves & Controls Protecting Your Personnel, Facilities, Environment and Natural Resources Crown Self-Contained Hydraulic Valve Actuation System Stream-Flo s Crown self-contained hydraulic valve actuation system is used

More information

Box Thread A B C D E F Weight F 15,000 lb 45,000 lb 2 IF API 2-1/2 1 7/8 11-1/8 1-3/4 7/ lb

Box Thread A B C D E F Weight F 15,000 lb 45,000 lb 2 IF API 2-1/2 1 7/8 11-1/8 1-3/4 7/ lb 00503 Series DUB-Lite Specifically built for the HDD industry, DUB-Lite swivels feature a multiple sealing system which is progressive in design and application. Swivels 00503-X04 to 00503-X15 include

More information

SPE Workshop: European Formation Damage 7-8 June 2017 Sofitel Chain Bridge, Budapest, Hungary

SPE Workshop: European Formation Damage 7-8 June 2017 Sofitel Chain Bridge, Budapest, Hungary Slide 1 SPE Workshop: European Formation Damage 7-8 June 2017 Sofitel Chain Bridge, Budapest, Hungary Novel Proppant Systems for Sand Control and Enhanced Performance of Cased Hole Frac & Pack Injectors

More information

Carbon Fiber Air Shafts. Air Shafts. Core Chucks. Adapter chucks. Safety chucks. Bowed Rolls

Carbon Fiber Air Shafts. Air Shafts. Core Chucks. Adapter chucks. Safety chucks. Bowed Rolls Carbon Fiber Air Shafts Air Shafts Core Chucks Adapter chucks Safety chucks Bowed Rolls The Center of Superior Web Handling Since 1961 NimCor has pioneered web handling solutions with innovative air shafts,

More information

Best Practices for Downhole Motor Operations in Coiled Tubing Applications

Best Practices for Downhole Motor Operations in Coiled Tubing Applications Best Practices for Downhole Motor Operations in Coiled Tubing Applications INTRODUCTION The application of downhole motors with coiled tubing operations has become routine in today s expanded scope of

More information

Sanitary Turbine Flow Meter - TA3 Installation, Operating & Maintenance Manual

Sanitary Turbine Flow Meter - TA3 Installation, Operating & Maintenance Manual COMPANY Sanitary Turbine Flow Meter - TA3 Installation, Operating & Maintenance Manual 2016 AW-Lake Company. All rights reserved. Doc ID:SANITARYMAN16 Mechanical Specifications Measuring Accuracy ± 1.0%

More information

Product Manual. CVS V-100 Ball Valves 2 though 8 Inch Designs. Introduction: Installation:

Product Manual. CVS V-100 Ball Valves 2 though 8 Inch Designs. Introduction: Installation: Product Manual CVS V-100 Ball Valves 2 though 8 Inch Designs. Introduction: These instructions apply specifically to the 2 through 8 inch CVS V-100 Ball Valve Bodies. This manual provides maintenance,

More information

BEST OF 2014 January December

BEST OF 2014 January December Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

More information

M&J Valve Product Overview

M&J Valve Product Overview M&J Valve Product Overview M&J Valve was founded in 1962 by Marvin Grove and has been a leader in the pipeline valve industry since its inception. Now part of SPX FLOW, M&J Valve meets or exceeds the quality

More information

APCO SLANTING DISC CHECK VALVES

APCO SLANTING DISC CHECK VALVES BULLETIN 800 JULY 2011 APCO SLANTING DISC CHECK VALVES Series 800, 800B, 800T APCO Slanting Disc Check Valve With decades of experience to guarantee reliability and outstanding performance, our Slanting

More information

Installation Operation Maintenance. LSSN Butterfly Valve AGA Approved 50MM - 150MM. QAD#IM6055.REVA

Installation Operation Maintenance. LSSN Butterfly Valve AGA Approved 50MM - 150MM.  QAD#IM6055.REVA LSSN Butterfly Valve Installation Operation Maintenance Licence Number: 5326 www.challengervalves.com.au 1 Index 1. INTRODUCTION 1.1 Design Features 3 1.2 Flange and Pipe Compatibility 4 1.3 Operating

More information

Carbon Fiber Air Shafts. Air Shafts. Core Chucks. Adapter chucks. Safety chucks. Bowed Rolls

Carbon Fiber Air Shafts. Air Shafts. Core Chucks. Adapter chucks. Safety chucks. Bowed Rolls Carbon Fiber Air Shafts Air Shafts Core Chucks Adapter chucks Safety chucks Bowed Rolls The Center of Superior Web Handling Since 1961 NimCor has pioneered web handling solutions with innovative air shafts,

More information

Flow Control and Stimulation Products

Flow Control and Stimulation Products Plug Valves Swivel Joints Crosses 45 Laterals Extra Heavy Duty Tees Pup Joints Integral Fittings Union Swages Safety Relief Valves Hose Loops Union Crossovers Flow Control and Stimulation Products Issue

More information

Airflex Spring Applied Brakes

Airflex Spring Applied Brakes Airflex Spring Applied Brakes CS and CSA Brake Elements... 232 Technical and Dimensional Data... 233 Applications... 235 Component Parts... 237 CTE Brake Elements... 239 Technical and Dimensional Data...

More information

PIGGING PRODUCTS. Capex supply. PIG LAUNCHER and RECEIVER

PIGGING PRODUCTS. Capex supply. PIG LAUNCHER and RECEIVER PIGGING PRODUCTS Capex supply PIG LAUNCHER and RECEIVER Before Cleaning After Cleaning TYPES OF PIGS DISPLACEMENT AND BATCHING PIGS AND PIG WITH BLADES (FOR CLEANING) 2 to 6 3 and 4 PIG with blades 5 to

More information

Maintenance Information

Maintenance Information Form 16573321 Edition 1 July 2004 Air Grinder Series 61H Maintenance Information Save These Instructions Always wear eye protection when operating or performing maintenance on this tool. Always turn off

More information

Introduction. Installation. Maintenance. Bill of Materials

Introduction. Installation. Maintenance. Bill of Materials Table of Contents Introduction Specitications... 3 Operation... 4 Installation New Installations... 6 Retrofit Installations... 6 Flow Control Switch... 7 Dimensions... 8 E-7 Valve... 28 E-7 Valve with

More information

SV SERIES. Metal Seated Ball Valves

SV SERIES. Metal Seated Ball Valves SV SERIES Metal Seated Ball Valves 1/2 THRU 12 ANSI 150# THRU ANSI 1500# FULL PORT AND REDUCED PORT UNI-DIRECTIONAL AND BI-DIRECTIONAL 316SS OR CARBON STEEL BODY LIVE LOADED STEM PACKING HIGH QUALITY CASTINGS

More information

Hydraulic Wireline Jar. Manual D460

Hydraulic Wireline Jar. Manual D460 Hydraulic Wireline Jar Manual D460 Contents Logan Hydraulic Wireline Jar Overview... 2 Uses... 2 Construction... 2 Operation... 2 Tool Illustration... 3 Maintenance... 4 Disassembly... 4 Assembly... 4

More information

Service Handbook. High-Pressure Washer Pump

Service Handbook. High-Pressure Washer Pump Pump 629 9/28/01 3:22 PM Page 1 Service Handbook High-Pressure Washer Pump 3.532-629.0 10.00 Pump 629 9/28/01 3:22 PM Page 2 Pump 629 9/28/01 3:22 PM Page 3 TROUBLESHOOTING OVERVIEW How to Use This Manual

More information

Swiss Automatic Tooling

Swiss Automatic Tooling Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets

More information

# D: SMU - New Cylinder Bore Piston Sleeve Replacement Procedure - (Apr 5, 2006)

# D: SMU - New Cylinder Bore Piston Sleeve Replacement Procedure - (Apr 5, 2006) #03-06-01-018D: SMU - New Cylinder Bore Piston Sleeve Replacement Procedure - (Apr 5, 2006) New Cylinder Bore Piston Sleeve Replacement Procedure Models: 2002-2005 Chevrolet Cavalier 2004-2006 Chevrolet

More information

TECHNICAL DATA CAUTION

TECHNICAL DATA CAUTION Page 1 of 6 1. DESCRIPTION The Viking Model D-2 Accelerator is a quick-opening device, with an integral anti-flood assembly, used to increase the operating speed of a differential type dry pipe valve.

More information

BLAST NOZZLES BROCHURE

BLAST NOZZLES BROCHURE BLAST NOZZLES BROCHURE TYPES OF BLAST NOZZLES A blast nozzle is designed to accelerate and direct an air and abrasive mixture to the work surface for increased production. Blast nozzles are available in

More information

Surface Safety Valves Protecting Your Personnel, Facilities, Environment and Natural Resources

Surface Safety Valves Protecting Your Personnel, Facilities, Environment and Natural Resources Protecting Your Personnel, Facilities, Environment and Natural Resources Crown Hydraulic Surface Safety Valve System Stream-Flo s Crown Self-Contained Hydraulic Surface Safety Valve Actuation System is

More information

Minimizing risk with innovative design. Dual ESP Systems and Accessories

Minimizing risk with innovative design. Dual ESP Systems and Accessories Minimizing risk with innovative design Dual ESP Systems and Accessories Dual ESP Systems When you need to improve the performance of your high-asset-value wells, Schlumberger dual ESP systems provide the

More information

Table of Contents. Choke Principle...4

Table of Contents. Choke Principle...4 Table of Contents Choke Principle...4 Positive and Adjustable Choke Features and Benefits of Positive and Adjustable Choke...5 Avialable Sizes and Pressure Ratings... Positive Choke...6 Adjustable Choke...7

More information

No.12 MOTOR GRADER. 115 Horsepower. Tandem drive

No.12 MOTOR GRADER. 115 Horsepower. Tandem drive 115 Horsepower Tandem drive No.12 MOTOR GRADER Standard No. 12 Motor Grader is equipped with 13:00-24 drive tires, 9:00-25 front tires, and 12 ft. blade. Cab, hot water heater, windshield wiper and defroster

More information

Awide choice of devices

Awide choice of devices Chapter Four Methods and Devices for the Prevention of Backflow and Back-Siphonage Awide choice of devices exists that can be used to prevent backsiphonage and backpressure from adding contaminated fluids

More information

USS-LIBERTY FJM. A True Flush Connection for Clearance-Critical Applications

USS-LIBERTY FJM. A True Flush Connection for Clearance-Critical Applications USS-LIBERTY FJM A True Flush Connection for Clearance-Critical Applications USS-LIBERTY FJM A True Flush Connection for Clearance-Critical Applications Reverse angle torque shoulder External metal-to-metal

More information

EASY TO OPERATE. EASY TO CLEAN. EASY TO MAINTAIN.

EASY TO OPERATE. EASY TO CLEAN. EASY TO MAINTAIN. EASY TO OPERATE. EASY TO CLEAN. EASY TO MAINTAIN. 800.837.9711 www.superproductscorp.com PROVIDING MAXIMUM PERFORMA CAMEL MAKES ANY JOB EASIER Since its introduction more than 35 years ago, municipalities

More information

RD20/RD20XC/APL DRILL RIGS. Oil and Gas Drilling atlascopco.com/rd20

RD20/RD20XC/APL DRILL RIGS. Oil and Gas Drilling atlascopco.com/rd20 RD20/RD20XC/APL DRILL RIGS Oil and Gas Drilling atlascopco.com/rd20 THE INDUSTRY STANDARD Approximately 300 RD20 s operating worldwide have earned a reputation for reliability, strength and drilling performance.

More information

NUCLEAR VALVES. Design, Manufacturing, Assembly and Testing

NUCLEAR VALVES. Design, Manufacturing, Assembly and Testing NUCLEAR S Design, Manufacturing, Assembly and Testing DAHER S NUCLEAR MARKET Daher has been innovating in the nuclear valve sector for nearly 40 years. Its valves are present across the market: > Nuclear

More information

Technical Bulletin # 1251

Technical Bulletin # 1251 Transmission: Subject: Application: Issue Date: CD4E TCC Slip Code Diagnosis Ford, Mercury and Mazda May 2009 CD4E TCC Slip Code Diagnosis Once the check engine light illuminates, the transmission will

More information

TRUCK TRAILER AND BUS

TRUCK TRAILER AND BUS Product Guide TRUCK TRAILER AND BUS SHOCKS www.gabriel.com EXPERIENCE, COVERAGE AND DURABILITY... Decades of experience deliver results. FleetLine and GasSLX HD product designs have been proven on- and

More information

Collet Connector Comparison

Collet Connector Comparison Collet Connector Comparison Collet Connector Comparison As drilling depths have increased over the years, Cameron collet connectors have evolved to address issues concerning higher internal and external

More information

Airflex Clutches and Brakes for Oil & Gas

Airflex Clutches and Brakes for Oil & Gas Airflex Clutches and Brakes for Oil & Gas October 2013 2008 Eaton Corporation. All rights reserved. Airflex Overview and History Leading Manufacturer of Industrial Clutches and Brakes Make-to-order business

More information

The EL-FHT is a. The FH-series line of fire hose testers, offers testing. Pressure Wands Fire Hose Testers Hose Restraints Hand Pumps MINI HOSE TESTER

The EL-FHT is a. The FH-series line of fire hose testers, offers testing. Pressure Wands Fire Hose Testers Hose Restraints Hand Pumps MINI HOSE TESTER FH Series The FH-series line of fire hose testers, offers testing pressures up to 1,000 PSI, with flow rates up to 10 GPM. Gas, Electric, and Diesel driven models, designed to safely test fire hose up

More information

EBFire Guide Book. Contents. Introduction 5-6. Dual Diode Switches 7-8. Plastic vs Aluminum Dual Diodes 9. Plug Shoot Switch Dual Diode Pack 12

EBFire Guide Book. Contents. Introduction 5-6. Dual Diode Switches 7-8. Plastic vs Aluminum Dual Diodes 9. Plug Shoot Switch Dual Diode Pack 12 EBFire Guide Book EBFire Guide Book Contents Introduction 5-6 Dual Diode Switches 7-8 Plastic vs Aluminum Dual Diodes 9 Plug Shoot Switch 10-11 Dual Diode Pack 12 Pressure Switches 13-15 Feed Thru s 16-18

More information

Altra Industrial Motion. AquaMaKKs Water Cooled Clutches and Brakes with Composite Water Jackets

Altra Industrial Motion. AquaMaKKs Water Cooled Clutches and Brakes with Composite Water Jackets Altra Industrial Motion AquaMaKKs Water Cooled Clutches and Brakes with Composite Water Jackets AquaMaKKs Water Cooled Clutches and Brakes AquaMaKKs water cooled clutches and brakes are designed to provide

More information

UNISON CORPORATION. DedTru Centerless Grinding Product Line

UNISON CORPORATION. DedTru Centerless Grinding Product Line Price List PL UNISON CORPORATION DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model C6 DedTru Grinding Fixture Model IGF Internal Grind Fixture

More information

Flowserve Spring Diaphragm Rotary Actuators

Flowserve Spring Diaphragm Rotary Actuators Flow Control Division Installation, Operation, Maintenance Instructions Flowserve Spring Diaphragm Rotary Actuators TERMS CONCERNING SAFETY The safety terms DANGER, WARNING, CAUTION and NOTE are used in

More information

CONVEYOR COMPONENTS AND ACCESSORIES. Better by design since 1901

CONVEYOR COMPONENTS AND ACCESSORIES. Better by design since 1901 CONVEYOR COMPONENTS AND ACCESSORIES Better by design since 1901 STEPHENS-ADAMSON HAS THE IDLER COMPLETE PRODUCT LINE Sealed, Regreasable, or Greased and Plugged CEMA B, C, D, AND E Ratings For Light to

More information

HP20 Series. Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending

HP20 Series. Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending HP20 Series Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending RigPower s mission is to create new industry standards in industrial electrical connectors by combining appropriate

More information

HAMMER UNIONS AND SWIVEL JOINTS. Sara Sae

HAMMER UNIONS AND SWIVEL JOINTS. Sara Sae HAMMER UNIONS AND SWIVEL JOINTS Sara Sae Quality and Innovation Sara manufactures a diverse range of oilfield equipment in its manufacturing facility in India, using the latest design techniques and CNC

More information

91 \\SERVER\CATALOG 2018\2018 Catalog Rev 1 SHUT OFF BALL VALVE

91 \\SERVER\CATALOG 2018\2018 Catalog Rev 1 SHUT OFF BALL VALVE SHUT OFF BALL VALVE Maxton Elevator Shut Off Valves are specifically built for hydraulic elevators and are labeled and tested to comply with ASME A17.1 / CSA B44 at a 5:1 Safety factor. BV2G2G SHOWN Hard

More information

INSTALLATION, OPERATION, & MAINTENANCE MANUAL Models # MM-30, MM-30HT, MM-50, MM-50HT, & MM-50 EXL with Special HP Tool and Special HP EXL Tool

INSTALLATION, OPERATION, & MAINTENANCE MANUAL Models # MM-30, MM-30HT, MM-50, MM-50HT, & MM-50 EXL with Special HP Tool and Special HP EXL Tool INSTALLATION, OPERATION, & MAINTENANCE MANUAL Models # MM-30, MM-30HT, MM-50, MM-50HT, & MM-50 EXL with Special HP Tool and Special HP EXL Tool INSTALLATION INSTRUCTIONS FOR THE MODEL MM-30 & MODEL MM-50

More information

USER INSTRUCTIONS. Spring Diaphragm Rotary Actuators. Installation Operation Maintenance. Experience In Motion FCD VLAIM /12

USER INSTRUCTIONS. Spring Diaphragm Rotary Actuators. Installation Operation Maintenance. Experience In Motion FCD VLAIM /12 USER INSTRUCTIONS Spring Diaphragm Rotary Actuators FCD VLAIM050-01 05/12 Installation Operation Maintenance Experience In Motion Contents General Information 3 Unpacking 4 Installation 4 Changing Air

More information

PLUNGER PUMP SERVICE MANUAL

PLUNGER PUMP SERVICE MANUAL PLUNGER PUMP SERVICE MANUAL INSTALLATION AND START-UP INFORMATION Optimum performance of the pump is dependant upon the entire liquid system and will be obtained only with the proper selection, installation

More information

WORLDWIDE OILFIELD MACHINE

WORLDWIDE OILFIELD MACHINE Table of Contents WOM s BOP Stack...4 WU BOP Major Features...6 WU BOP Specifications...7 WU BOP Dimensional Data (Single)...8 WU BOPDimensional Data (Double)...9 WU BOP Components...10 WU BOP Parts and

More information