Set, seal, and retrieve with confidence. Packers Catalog

Size: px
Start display at page:

Download "Set, seal, and retrieve with confidence. Packers Catalog"

Transcription

1 Set, seal, and retrieve with confidence Packers Catalog 1

2 2

3 Table of Contents Conventional Packers...05 ESP/Dual Completion Packers...35 High-Rate-Gas Packers...43 HPHT Packers...47 Intelligent Completion Packers...51 Sand Control Packers...57 Service Packers...67 Swellable Packers...79 Thermal Packers...85 Accessories

4 4

5 Conventional Packers 5

6 HSP-1 Conventional sealbore packer Vertical, deviated, or horizontal wellbores Permanent production or isolation packer High-temperature, high-pressure hostile environments BENEFITS Positive set of slips and elements are provided by twin-piston design Packer may be set on workstring to facilitate completion options FEATURES 360, one-piece, opposing-slip design Full tubing bore-through packer and stinger Reduced-OD latching head Ability to install wellhead before the packer is set Twin-piston setting Ability to convert to a temporary bridge plug Lower slips and upper slips independently set to eliminate tubing movement The field-proven HSP-1 conventional sealbore packer has been used for many years in high-risk, harsh-environment wells. The packer forms part of the tubing string. Main features Hydraulic-set Permanent For use in conventional completions Designed and tested in accordance with ISO V0 standards Opposing-slip design This packer s design incorporates two full-circumference slips supported by two opposing tapered cones with a sealing element assembly positioned between them. The slips and sealing element assembly are sequentially set and held in position by a positive lock mechanical ratchet. The lower slip is set before the sealing element assembly to eliminate tubing movement and centralize the packer in the casing before the element fully packs off against the casing wall. The slips are designed to split into multiple segments upon setting and yield a full 360 grip on the casing. High-performance sealing The high-performance sealing element features metallic antiextrusion rings positioned above and below the sealing element. These antiextrusion rings provide a positive metal-to-metal interference fit with the casing to prevent seal extrusion and provide a reliable packoff. HSP-1 series packers are available for a variety of service applications, including high H 2 S and CO 2 exposure. HSP-1 conventional sealbore packer. 6

7 HSP-1 HSP-1 Conventional Sealbore Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Upper Sealbore, [114.3] [ ] [90.5] [49.2] [66.7] [127.0] [ ] [99.9] [49.2] [69.9] [139.7] [ ] [123.8] [49.2] [69.9] [139.7] [ ] [111.1] [49.2] [69.9] [168.3] [ ] [136.5] [60.3] [88.9] [168.3] [ ] [136.5] [73.0] [95.3] [177.8] [ ] [149.2] [63.5] [88.9] [177.8] [ ] [149.2] [73.0] [95.3] [177.8] [ ] [149.2] [85.7] [108.0] [177.8] [ ] [149.2] [99.9] [119.1] [193.7] [ ] [161.9] [60.3] [88.9] [193.7] [ ] [161.9] [73.0] [95.3] [219.1] [ ] [184.2] [98.4] [136.5] [244.5] [ ] [207.9] [73.0] [95.3] [244.5] [ ] [207.9] [98.4] [136.5] [244.5] [ ] [207.9] [120.7] [152.4] [244.5] 47.0 [69.94] [214.3] [152.4] [184.2] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

8 Hydraperm Conventional sealbore packer High-pressure, high-volume production, injection, or disposal wells Highly deviated wells ADVANTAGES Rated for 10,000 psi [68,947 kpa] at 350 degf [175 degc] One-trip setting capability Hydraulic or coiled tubing setting Full-circle slips to minimize casing damage Lower slips secured to packer mandrel with threaded connection Available alternative bore Optional bottom sub configuration to accommodate pumpout plugs, sealbore extensions, millout extensions, and tubing The Hydraperm conventional sealbore packer utilizes a single-element system and full-circle slips to perform in a wide range of casing weights while minimizing casing damage. This one-trip-capable packer is ideal for high-pressure, high-volume production, injection, or disposal wells. It is particularly suited for highly deviated wells where tubing manipulation is difficult and wireline operations are unsuitable. Main features Hydraulic-set Permanent For use in conventional completions Ratings and settings The Hydraperm packer is rated to 10,000 psi [68,947 kpa] at 350 degf [175 degc] and can be set on coiled tubing. The optional bottom sub configures to accommodate pumpout plugs, sealbore extensions, millout extensions, tubing, or other completion accessories. Hydraperm conventional sealbore packer. 8

9 Hydraperm Hydraperm Conventional Sealbore Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Casing ID, Min., Casing ID, Max., 7 [177.8] [ ] [154.79] [159.41] 7 [177.8] [ ] [163.98] [166.07] [244.48] [ ] [214.25] [220.50] [244.48] [ ] [220.50] [226.59] Not applicable Tool Size, [1, ,016] [1, ,016] [2, ,524] [2, ,524] Tool OD, Max., Standard Tool Sealbore, Alternative Tool Sealbore, [149.10] [101.60] [120.65] [157.02] [101.60] [120.65] [208.74] [152.40] na [214.17] [152.40] na Seal Assembly Specifications Description, Size, Tool Through Seals, Min., 7 [177.8] standard [1, ] 3 [76.20] 7 [177.8] alternative [1, ,016] 4 [101.60] [244.48] standard [1,524 1,219.2] [122.63] Copyright 2014 Schlumberger. All rights reserved. 14-CO

10 Hydro-6 Conventional multizone packer Deviated wells Multiple-zone, multiple-packer completions ADVANTAGES Easy release with a fully adjustable, straight-pickup shear mechanism Short, compact design Fast, reliable installation in straight or highly deviated wells Field-proven performance Easier, safer retrieval with built-in equalizing and circulating system The Hydro-6* conventional multizone packer is ideal for use in deviated wells, multiple-packer completions, and applications where the packer is to be set after the wellhead is installed. Because no mandrel movement occurs during setting, it may also be used in multiple-packer completions where all packers are placed simultaneously. Main features Hydraulic-set Retrievable For use in conventional completions Setting-pressure features Set with a pressure differential, the Hydro-6 packer has an easily adjust able setting-pressure feature and a bidirectional mechanical slip system. The packer features a unique design that allows debris to be circulated from above the packer when releasing. A three-piece, dual-durometer element system and a built-in equalizing and circulating system ensure reduced risk and easy release. No tubing movement is required to set the packer. After the packer is set, the tubing can be landed in either compression or neutral condition. The setting force is mechanically locked into the sealing elements with a positive ratchet-lock mechanism. The Hydro-6 packer is released with an upward pull exceeding the rating of the shear release screws. Optionally, the Hydro-6 packer is available with a rotation release mechanism. Hydro-6 conventional multizone packer. Hydro-6 Conventional Multizone Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] [139.7] [ ] [121.4] [50.8] 275 [135] [139.7] [ ] [117.9] [50.8] 275 [135] [139.7] [ ] [114.3] [50.8] 275 [135] [146.1] [ ] [120.5] [50.8] 275 [135] [168.3] [ ] [143.8] [62.0] 275 [135] [168.3] [ ] [142.9] [62.0] 275 [135] [168.3] [ ] [139.3] [62.0] 275 [135] [177.8] [ ] [159.2] [62.0] 275 [135] [177.8] [ ] [154.4] [62.0] 275 [135] [177.8] [ ] [151.6] [62.0] 275 [135] [177.8] [ ] [147.8] [62.0] 275 [135] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

11 Hydro-8 Conventional multizone packer As the bottom packer in multiple-zone dual completions Single-zone completions Highly deviated wells and multiple-packer completions ADVANTAGES Fully adjustable, straight-pickup, shear-release system Compact, field-proven design Quick, reliable installation in highly deviated wells Built-in equalizing and circulating system for increased safety and easy retrieval The Hydro-8* conventional multizone packer is used in a variety of applications, including single-zone isolation, multiple-string hookups, selective multiple-zone production, and stimulation. The Hydro-8 packer features a mechanical, bidirectional slip system to anchor the packer and resist upward and downward tubing movement. It also has a built-in internal bypass system that allows formation pressure to equalize before the slip is fully released. Main features Hydraulic-set Retrievable For use in conventional completions Setting operation The Hydro-8 packer is set by applying tubing pressure, which acts on the packer s setting piston area, shears the setting screws, and activates the packer-setting mechanism. The setting-mechanism trigger pressure is adjusted by adding or removing easily accessible shear screws. The packer s hydrostatic chamber allows the packer to be successfully set at lower pump pressures. Once the packer is fully set, the pack-off force is mechanically locked into the slips and sealing element with a positive lock-ratchet mechanism. This allows the tubing to be landed in either compression or neutral condition. Release operation The Hydro-8 packer does not require tubing manipulation during setting and can be set after the wellhead has been installed. Packer release is accomplished by a simple upward pull on the tubing string. Unlike many hydrostatic packers, the Hydro-8 packer can be adjusted or redressed in the field by onsite personnel. This packer also features an optional slickline-intervention, selective-set feature with a choice of upward or downward shift. Hydro-8 conventional multizone packer. Hydro-8 Conventional Multizone Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] [114.3] [ ] [95.8] [50.8] 275 [135] [127.0] [ ] [108.0] [50.8] 275 [135] [127.0] [ ] [104.8] [50.8] 275 [135] [139.7] [ ] [117.9] [62.0] 325 [163] [139.7] [ ] [114.3] [62.0] 325 [163] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

12 M1-X Conventional packer Zone isolation, injection, and production Shallow wells BENEFITS Simple, easy installation reduces rig time FEATURES 7,500-psi [51,710 kpa] and 10,000 psi [68,947 kpa] nominal pressure rating Temperature ratings based on elastomers Big bore version for larger production tubing requirements Quarter right-hand rotation to mechanically set and release Large internal bypass to maximize flow Double grip design to allow tubing to be left in tension, compression, or neutral Pressure hold from above or below Seals below upper slips that allow flushing of debris prior to releasing Optional safety release system (in some sizes) The M1-X conventional packer permits unrestricted flow and passage of full-gauge wireline tools and accessories with an unrestricted ID, making it ideal for zone isolation, injection, and production. The M1-X packer can be set with production tubing in tension, compression, or neutral, maximizing effectiveness in shallow wells and fiberglass tubing operations. Main features Mechanically set Retrievable For use in conventional completions Bypass closure The packer s mechanical lock-set action closes an internal bypass and allows application of pressure above or below the packer while reducing surge-andswab pressure during running and retrieval. This bypass closes during setting and opens to equalize pressure before releasing the slips. Seals and release Seals below the upper slips allow debris above the packer to be washed away prior to release. The packer is released by a quarter right-hand turn at the tool, followed by straight pickup of the production tubing. M1-X conventional packer. 12

13 M1-X M1-X Conventional Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Casing ID, Min., Casing ID, Max., Tool OD, Max., Tool ID, Min., Thread Box Up/Pin Down [73.03] 6.5 [9.67] [60.33] [62.00] [58.78] [25.15] EU 10 RD 3.5 [88.90] [ ] [71.04] [72.82] [70.76] [31.62] NU 10 RD 4 [101.60] [ ] [85.12] [86.94] [82.68] [7.97] EU 10 RD 4.5 [114.30] [ ] [92.18] [94.01] [82.68] [7.97] EU 10 RD 4.5 [114.30] [ ] [97.18] [99.57] [92.84] [49.02] EU 8 RD 4.5 [114.30] [ ] [99.57] [103.89] [95.48] [49.02] EU 8 RD 5 [127.0] [ ] [104.80] [105.56] [100.15] [49.02] EU 8 RD 5 [127.0] [ ] [105.56] [108.61] [101.60] [49.02] EU 8 RD 5 [127.0] [ ] [111.96] [115.82] [104.78] [49.02] EU 8 RD 5.5 [139.70] [ ] [118.62] [121.36] [114.30] [50.67] EU 8 RD 5.5 [139.70] [ ] [121.36] [124.26] [117.48] [50.67] EU 8 RD 5.5 [139.70] [ ] [124.26] [128.12] [117.48] [50.67] EU 8 RD 5.5 [139.70] [ ] [118.62] [121.36] [114.30] [59.94] EU 8 RD 5.5 [139.70] [ ] [121.36] [125.73] [117.48] [59.94] EU 8 RD 5.5 [139.70] [ ] [125.73] [128.12] [121.44] [59.94] EU 8 RD 5.75 [146.05] [ ] [127.00] [130.61] [122.35] [59.94] EU 8 RD 5.75 [146.05] [ ] [127.00] [134.16] [122.35] [59.94] EU 8 RD [168.28] [ ] [147.09] [150.39] [141.94] [63.88] EU 8 RD [168.28] [ ] [150.39] [153.64] [146.18] [63.88] EU 8 RD 7 [177.80] [ ] [150.37] [154.79] [141.94] [63.88] EU 8 RD 7 [177.80] [ ] [154.79] [159.41] [141.94] [63.88] EU 8 RD 7 [177.80] [ ] [159.41] [166.07] [152.40] [63.88] EU 8 RD 7 [177.80] [ ] [163.98] [166.07] [158.88] [63.88] EU 8 RD 7 [177.80] [ ] [150.37] [154.79] [146.05] [75.95] 3.5 EU 8 RD 7 [177.80] [ ] [154.79] [159.41] [149.23] [75.95] 3.5 EU 8 RD 7 [177.80] [ ] [160.93] [166.07] [152.40] [75.95] 3.5 EU 8 RD [193.68] [ ] [168.28] [171.83] [163.91] [63.88] EU 8 RD [193.68] [ ] [174.63] [178.44] [169.47] [63.88] EU 8 RD [193.68] [ ] [168.28] [171.83] [163.91] [75.95] 3.5 EU 8 RD [193.68] [ ] [174.63] [178.44] [169.47] [75.95] 3.5 EU 8 RD [219.08] [ ] [196.22] [201.19] [190.50] [101.60] 4.5 EU 8 RD [219.08] [ ] [203.63] [205.66] [196.85] [101.60] 4.5 EU 8 RD [244.48] [ ] [216.79] [222.38] [209.55] [101.60] 4.5 EU 8 RD [244.48] [ ] [222.38] [228.63] [215.90] [101.60] 4.5 EU 8 RD [273.05] [ ] [252.73] [258.88] [246.08] [101.60] 4.5 EU 8 RD Casing weight available in 10,000 psi and standard bores. Copyright 2014 Schlumberger. All rights reserved. 14-CO

14 MDF and MDFBB Conventional multisetting packer and conventional multisetting big-bore packer Conventional completions Vertical and deviated wells Permanent sealbore production or isolation packer High-volume production and injection wells Sump packer for gravel-pack applications BENEFITS High running speed reduces rig time Packer is easily milled FEATURES Setting on wireline, coiled tubing, or tubing workstring to provide operational versatility 10,000-psi [68,947 kpa] nominal pressure rating Temperature ratings based on elastomer type Full-circle, opposed slips to minimize induced loads in supporting casing Sealbore ID in packer mandrel for optimum seal performance S limline design for fast, easy running Optional bottom guides for quick addition of millout extensions, sealbore extensions, and other accessories The MDF conventional multisetting packer and MDFBB conventional multisetting big-bore packer are high-performance completion packers featuring a standard operating envelope of 10,000-psi [68,947 kpa] nominal pressure rating (temperature ratings based on elastomers). Main features Hydraulic- and wireline-set Permanent For use in conventional applications Construction and pressure integrity The MDFBB packer features a larger bore than the MDF packer for use with larger-diameter production tubing. Both packers feature a setting sleeve, sealbore mandrel, opposed full-circle slips and cones, and a packing element assembly with a backup system for maximum pressure integrity. Optional bottom guides are threaded to the mandrel for including accessories such as sealbore extensions, millout extensions, or tailpipe assemblies. A range of available elastomers and materials for flow-wetted parts ensure compatibility with wellbore fluids; the Elastomer Guide outlines the materials available for a variety of service conditions. MDF conventional multisetting packer. MDFBB conventional multisetting big-bore packer. 14

15 MDF and MDFBB MDF Conventional Multisetting Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Casing ID, Min., Casing ID, Max., [114.30] [ ] [99.56] [103.88] 5 [127] 5.5 [139.70] 7 [177.80] [ ] [244.47] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [105.56] [114.14] [118.61] [124.25] [115.52] [150.36] [154.78] [150.36] [161.69] [168.27] [214.24] [111.96] [115.82] [121.36] [128.12] [121.36] [154.79] [159.41] [159.41] [171.83] [ ] [220.49] Tool Size Tool OD, Max., Sealbore, Min., Seal Assembly Size Throughbore Seals, Min., Baker E-4 Setting Tool Hydraulic Setting Tool [95.25] [68.24] [49.22] Size tool [100.58] [68.24] [49.22] Size tool [107.95] [68.24] [49.22] Size tool [112.52] [68.24] [49.22] Size tool [115.82] [68.24] [49.22] Size tool [109.98] [68.25] [49.23] Size tool [141.45] [68.24] [60.32] Size tool [141.45] [82.55] [60.32] Size tool [149.09] [68.24] [49.22] Size tool [149.09] [82.55] [60.32] Size tool [141.45] [82.55] [60.32] Size tool [157.02] [68.24] [49.22] Size tool [157.02] [82.55] [60.32] Size tool [161.79] [68.24] [49.22] Size tool [161.79] [82.55] [60.32] Size tool [210.08] [120.65] [98.42] Size tool MDFBB Conventional Multisetting Big-Bore Packer Specifications Casing OD, Casing Weight Range, lbm/ft [kg/m] Casing ID, Min., Casing ID, Max., Tool Size 4.5 [114.30] 5.5 [139.70] 7 [177.80] [ ] [244.47] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [97.18] [118.61] [124.25] [150.36] [154.78] [161.69] [168.27] [214.24] [220.49] [99.568] [121.36] [128.12] [154.79] [161.69] [171.83] [178.44] [220.49] [226.59] Tool OD, Max., Sealbore, Min., Seal Assembly Size Min. Baker E-4 Throughbore Seals, Setting Tool Hydraulic Setting Tool [91.41] [63.50] [54.27] Size tool [112.70] [76.20] [59.94] Size tool [115.90] [76.20] [59.94] Size tool [141.45] [101.60] [76.20] Size tool [149.23] [101.60] [76.20] Size tool [157.15] [101.60] [76.20] Size tool [161.93] [101.60] [76.20] Size tool [208.73] [152.4] [139.82] Size tool [214.29] [152.4] [139.82] Size tool Copyright 2014 Schlumberger. All rights reserved. 14-CO

16 MRP Conventional modular packer Single-string completions Zonal isolation Vertical, deviated, or horizontal wellbores BENEFITS Simplified operations reduce rig costs FEATURES Ability to pressure test the system at the surface No tubing movement during installation Minimal debris buildup above slips Easy to circulate out debris before retrieval Positive casing grip to secure packer Slips located below the sealing element Equalization system above the element Adjustable, straight-pull shear release Field-proven sealing element Bidirectional slips Minimized end effect on shear-release screws The MRP conventional modular packer is used in vertical and deviated wellbores or in applications in which single or multiple packers are set after the wellhead has been installed. A modular shell and body design for low-to-medium pressure differentials allows configuration as a single-string production packer. Its compact, modular design makes the MRP packer an economical choice for production applications. Main features Hydraulic-set Retrievable For use in conventional completions Designed and tested in accordance with ISO V3 Installation and release The MRP packer is installed with the completion tubing and is set by applying pressure to the tubing. Retrieval of the MRP packer is accomplished with a straight upward pull on the tubing. Once the tension on the tubing string exceeds the shear value of the release pins, the slips disengage the casing and the element relaxes. Set at the factory to a standard value, the packer shear-release mechanism can be adjusted in the field just before installation. MRP conventional modular packer. 16

17 MRP MRP Conventional Modular Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [177.8] [ ] [154.7] 2.426, [61.62, 74.22] 325 [163] 7,000 [48,263] [177.8] [ ] [152.4] 2.426, [61.62, 74.22] 325 [163] 7,000 [48,263] [177.8] [ ] [150.1] 2.426, [61.62, 74.22] 325 [163] 7,000 [48,263] [177.8] [ ] [148.6] 2.426, [61.62, 74.22] 325 [163] 7,000 [48,263] [193.7] [ ] [169.9] [74.2] 325 [163] 7,000 [48,263] [193.7] [ ] [163.6] [74.2] 325 [163] 7,000 [48,263] [244.5] [ ] [215.0] 2.922, 3.910, [74.2, 99.3, 120.2] 325 [163] 7,000 [48,263] [244.5] [ ] [212.2] 2.922, 3.910, [74.2, 99.3, 120.2] 325 [163] 7,000 [48,263] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

18 Neptune Conventional hydrostatic-set packer Deviated wellbores Conditions where mechanically setting equipment is difficult Single zone completions Bottom packer in multizone completions BENEFITS Packer can be set in both low and high hydrostatic wells FEATURES Straight-pull release Locked-in pack-off force Hydraulic hold-downs that resist differential pressure below the packer Hydraulic setting for low hydrostatic wells Ability to withstand high hydrostatic pressure The Neptune* conventional hydrostatic-set packer can be set either hydraulically or hydrostatically, allowing tubing to be left neutral or in compression. The Neptune packer is for use in deviated wellbores or other conditions where use of mechanically set equipment is not feasible. Main features Hydrostatic-set Retrievable For use in conventional completions Setting operation The Neptune packer withstands high hydrostatic pressures and includes hydraulic hold-downs to resist differential pressure from below. The packer can be set hydraulically in low hydrostatic head wells and can be released with a straight-pull release. Neptune conventional hydrostatic-set packer. 18

19 Neptune Neptune Conventional Hydrostatic-Set Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Casing, Min., Casing, Max., Packer OD, Max., Packer Tool, Thread Box Pin 4.5 [114.30] [ ] [93.31] [103.88] [95.76] [50.241] EU 8 RD 5 [127.00] [ ] [114.30] [112.01] [104.90] [50.241] EU 8 RD 5 [127.00] [ ] [112.01] [115.82] [107.95] [50.241] EU 8 RD 5.5 [139.70] [ ] [117.60] [121.41] [114.30] [50.673] EU 8 RD 5.5 [139.70] [ ] [121.41] [125.73] [117.86] [50.673] EU 8 RD 5.5 [139.70] [ ] [125.73] [131.83] [121.41] [50.673] EU 8 RD 7 [177.80] 38 [56.55] [150.36] [147.19] [143.66] or [ or 76.2] or EU 8 RD 7 [177.80] [ ] [150.88] [155.95] [147.57] or [ or 76.2] or EU 8 RD 7 [177.80] [ ] [155.96] [159.51] [151.64] or [ or 76.2] or EU 8 RD 7 [177.80] [ ] [159.51] [164.08] [154.43] or [ or 76.2] or EU 8 RD 7 [177.80] [ ] [164.08] [167.13] [159.26] or [ or 76.2] or EU 8 RD [193.67] [ ] [167.13] [172.72] [163.83] or [ or 76.2] or EU 8 RD [193.67] [ ] [172.72] [178.56] [169.42] or [ or 76.2] or EU 8 RD [193.67] [ ] [178.56] [181.10] [172.97] or [ or 76.2] or EU 8 RD [244.48] [ ] [226.59] [230.20] [218.26] [ ] LCT [244.48] [ ] [220.49] [224.41] [214.30] [ ] LCT [244.48] [ ] [211.91] [220.49] [208.74] [ ] LCT *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

20 NIS Conventional interventionless hydrostatic-set packer Vertical, deviated, or horizontal wellbores Permanent production or isolation packing Nonperforated wellbores BENEFITS Reduced overall rig costs due to shorter installation times Eliminated plug installation in high-angle wells Decreased rig time associated with standard methods to set packers FEATURES No slickline or plug to set Atmospheric chamber to ensure maximum setting force is applied to packer Self-energizing element system Can be set with standard methods as a backup Autoset feature in case the tubing string drops ISO V0 qualified The NIS conventional interventionless hydrostatic-set packer is designed to be set in a closed system, such as a cased well before perforating. Another popular option is an open completion (openhole lateral or perforated casing) isolated by a formation isolation valve. Main features Hydrostatic-set Permanent For use in conventional completions Designed and tested in accordance with ISO V0 standards Multiple setting options To prevent premature setting of the packer, rupture discs are used to isolate the setting chamber. Each NIS packer is internally tested with nitrogen to ensure that the hydrostatic chamber is leak-free and will activate the packer at the proper depth. The NIS packer has a contingency set option whereby the packer can be set by conventional means; i.e., a plug is set below the packer on slickline and pressure is applied to the packer setting chamber through the tubing. This packer is an ideal candidate to reduce expensive rig time for extended-reach or deep wells. NIS Conventional Interventionless Hydrostatic-Set Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [244.5] [ ] 8.29 [210.6] 4.66 [118.4] 325 [163] 10,000 [68,948] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. NIS conventional interventionless hydrostatic-set packer. Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

21 QL Conventional sealbore packer Vertical, deviated, or horizontal wellbores Sump packing in gravel-pack operations Permanent gravel-pack packing Permanent sealbore production or isolation packing BENEFITS High running speed reduces rig time for packer installation and setting FEATURES Dual-opposing, one-piece slips Full-circle, solid-metal backup system to prevent element extrusion Unique swab-resistant element Pin-down configuration to allow easy attachment of accessories Ability to be easily milled The QL conventional sealbore packer is used as a production packer, gravel-pack packer, or a sump packer. The QL packer features the same upper latching profile as the QUANTUM* gravel-pack packer. Main features Wireline- or hydraulic-set Permanent For use as a production, gravel-pack, sump, or isolation packer Exceeds ISO V3 standards Fast running This packer is designed for risk-free and fast running either on wireline or with a hydraulic-setting tool on drill pipe or tubing. QL packers may be run and set on wireline using an E-4 or equivalent pressure setting assembly. On drillpipe or coiled tubing, a hydraulic-setting tool is used. Use in hostile environments This is a tough, large-bore packer with a field-proven record. The QL packer is suitable for standard or H 2 S service and is also available in several alternate material configurations to withstand virtually any hostile environment. A full line of accessory equipment is available. This permanent packer may be milled over and retrieved using a packer milling assembly. QL Conventional Sealbore Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [139.7] [ ] [115.9] [76.3] 325 [163] 10,000 [68,948] [139.7] [ ] [112.7] [76.3] 325 [163] 10,000 [68,948] [177.8] [ ] [152.8] [101.7] 325 [163] 10,000 [68,948] [177.8] [ ] [149.6] [101.7] 325 [163] 10,000 [68,948] [177.8] [ ] [147.7] [101.7] 325 [163] 10,000 [68,948] [177.8] [ ] [144.4] [101.7] 325 [163] 10,000 [68,948] [193.7] [ ] [159.1] [101.7] 325 [163] 10,000 [68,948] [244.5] [ ] [215.0] [152.5] 325 [163] 10,000 [68,948] [244.5] [ ] [208.8] [152.5] 325 [163] 10,000 [68,948] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. QL conventional sealbore packer. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

22 QLH Conventional hydrostatic-set sealbore packer Vertical, deviated, or horizontal wellbores Permanent gravel-pack packing Permanent sealbore production or isolation packing BENEFITS High running speed reduces rig time required to install and set the packer Packer is easily milled Design allows fast and reliable installation FEATURES Dual-opposing, one-piece slips 360 solid-metal backup system to prevent element extrusion Unique swab-resistant element Pin-down configuration for easy attachment of accessories The QLH conventional hydrostatic-set sealbore packer features the same upper latching profile as the QUANTUM* gravel-pack packer. This packer is designed for reliable and fast installation. The integral setting cylinder located below the bottom slips provides the force needed to set the full-circumference slips and pack off the sealing element. The QLH packer may be set after the tubing has been landed and the wellhead installed, eliminating the need for special equipment to facilitate tubing space out. Main features Hydrostatic-set Permanent For use in high-pressure, gravel-pack, sump, and isolation applications Usage and compatibility The QLH packer is compatible with all QL permanent packer seal assemblies and accessories. It is suitable for standard or H 2 S service and is available in alternate material configurations to withstand virtually any hostile environment. A full line of accessory equipment is available for the QLH packer. This permanent packer may be milled over and retrieved using a standard packer milling tool. QLH Conventional Hydrostatic-Set Sealbore Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [244.5] [ ] [215.0] [124.3] 325 [163] 10,000 [68,948] [244.5] [ ] [208.8] [152.5] 300 [149] 10,000 [68,948] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. QLH conventional hydrostatic-set sealbore packer. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

23 QLHB Conventional hydraulic-set sealbore and stepbore packer Vertical, deviated, or horizontal wellbores Installations requiring a full tubing ID through the packer and latch assembly Permanent sealbore production or isolation packer BENEFITS High running speed reduces rig time required to install and set the packer Packer is easily milled Design allows fast and reliable installation FEATURES Dual-opposing, one-piece slips 360 solid-metal backup system to prevent element extrusion Upper and lower sealbores Unique swab-resistant element Pin-down configuration for easy attachment of accessories The QLHB conventional hydraulic-set sealbore and stepbore packer, with a large upper sealbore, is commonly used as a production packer. In special applications, it can be used as a gravel-pack packer or a sump packer. The QLHB features the same upper latching profile as the QUANTUM* gravel-pack packer. Main features Hydraulic-set Permanent For use in gravel-pack completions and H2 S service Hostile environments The QLHB is suitable for standard or H 2 S service and is also available in several alternate material configurations to withstand virtually any hostile environment. A full line of accessory equipment is available for the QLHB packer. QLHB packers may be milled over and retrieved using standard packer milling tools. QLHB conventional hydraulic-set sealbore and stepbore packer. 27

24 QLHB QLHB Conventional Hydraulic-Set Sealbore and Stepbore Packer Specifications Casing Size, Max. OD, Nominal ID, Casing Weight Range, lbm/ft [kg/m] Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] Upper Sealbore Nominal ID, [177.8] [ ] [144.4] [101.7] 325 [163] 10,000 [68,948] [120.7] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

25 RSB Sphinx Conventional wireline-set sealbore packer Liner-top isolation and straddle packer installation ADVANTAGES 10,000 psi [68,947 kpa] nominal pressure rating Temperature based on elastomers Available elements for well conditions up to 450 degf [232 degc] Wireline setting with setting adapter Straight-pull-release Standard right-hand-release top section and conventional anchor seal assembly Optional jay slot top connections Optional bottom thread connections The RSB Sphinx* conventional wireline-set sealbore packer provides a downhole sealbore that can be removed and redressed when necessary, making it ideal for liner-top isolation and straddle packer installation. The packer can also be used as a locating sealbore for whipstock lateral work or locating drilling and production diverters with the optional jay slot top connection included. Main features Wireline-set Retrievable For use in conventional completions Features and settings The RSB Sphinx packer is rated to 10,000 psi [68,947 kpa], with an optional element system available for higher-temperature applications. The tool features a right-hand-release top section and a conventional anchor seal assembly in its standard configuration. A range of optional bottom thread connections are available to increase completion options. RSB Sphinx Conventional Wireline-Set Sealbore Packer Specifications OD, Casing Weight Range, lbm/ft [kg/m] ID, Min., ID, Max., Size OD, Max., 7 [177.80] [ ] [154.81] [159.41] [150.67] [244.48] [ ] [216.79] [220.50] [208.61] [244.48] [ ] [220.50] [224.41] [214.30] [244.48] [ ] [221.41] [133.35] [281.26] RSB Sphinx conventional wireline-set sealbore packer. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

26 RSBH[I] Sphinx Conventional injection sealbore packer Dual-zone production or injection applications ADVANTAGES No tubing movement during the setting sequence Straight-pull-release Variety of tubing connections and anchor seal assemblies ECNER array packing element system Able to be used for tandem packer installations Selective-set pressure with an additional setting piston assembly Rotational lock The RSBH[I] Sphinx* conventional injection sealbore packer is a high-performance, hydraulic-set, single-string packer for injection and production. It is utilized for most dual-zone production or injection applications. The wellhead can be installed and flanged up before setting the packer. Main features Hydraulic-set Retrievable For use in dual-zone production or injection applications Operating and running procedures Test the packer in the shop using the test kit prior to delivery to the wellsite. When the packer reaches the setting depth, plug the setting string below the packer, and pressure the tubing to 90% of the expected shut-in production pressure. In no case should the setting pressure be less than 2,000 psi [13,789 kpa]. Hold the pressure for 3 5 minutes to permit the packing elements and slips to properly seat against the casing. Once the packer is fully set, it may be pressure tested. RSBH[I] Sphinx Conventional Injection Sealbore Packer Specifications Casing OD, Casing Weight Range, lbm/ft [kg/m] Casing ID, Min., Casing ID, Max., Tool OD, Max., Packer Tool, [244.48] [ ] [216.79] [220.50] [208.74] [152.4] [244.48] [ ] [220.50] [224.41] [214.30] [152.4] [244.48] [ ] [224.41] [226.59] [218.26] [152.4] RSBH[I] Sphinx conventional injection sealbore packer. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

27 RSBH Sphinx Conventional sealbore packer Liner top isolation and straddle packer installation Dual-zone production or injection Single-trip completions Production or isolation sealbore packer Injection and production wells BENEFITS Single trip with production tubing saves rig time Design prevents disengagement while running and setting FEATURES 7,000-psi [48,263-kPa] nominal pressure rating Temperature rating based on elastomers One-trip hydraulic setting Straight-pull-release ECNER array packing element system Able to be used for tandem packer installations Selective-set pressure with an additional setting piston assembly Rotational lock Variety of tubing connections and anchor seal assemblies No tubing movement during the setting sequence The RSBH Sphinx* conventional sealbore packer is a highperformance, hydraulic-set, single-string packer. It provides a downhole sealbore that can be removed and redressed when necessary, making it ideal for liner top isolation and straddle packer installation. The packer can also be used as a locating sealbore for whipstock lateral work or locating drilling and production diverters with the optional jay slot top connection included. Main features Hydraulic-set Retrievable For use in conventional completions Features and settings The RSBH Sphinx packer is rated to 7,000 psi [48,263 kpa], with an optional element system available for higher-temperature applications. The packer is used for most dual-zone production or injection applications. The wellhead can be installed and flanged up before setting the packer. The tool features a left-hand-release top section and a conventional anchor seal assembly in its standard configuration. A range of optional bottom thread connections are available to increase completion options. RSBH Sphinx Conventional Sealbore Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Tool ID, 7 [177.80] Standard Sealbore, Alternative Sealbore, [ ] [146.05] 4.00 [101.60] 4.75 [120.66] [ ] [150.79] 4.00 [101.60] 4.75 [120.66] [ ] [154.50] 4.00 [101.60] 4.75 [120.66] [ ] [159.28] 4.00 [101.60] 4.75 [120.66] RSBH Sphinx conventional sealbore packer. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

28 Versalok Conventional wireline-set packer Ideal use for applications requiring fiberglass production tubing BENEFITS Wireline setting saves time and enables accurate packer placement FEATURES Compatibility with standard production tubing accessories Full-opening mandrel for tubing compatibility, even in heavy-wall casing sizes Bypass that opens before releasing upper slips for trouble-free retrieval Availability of 7,500- and 10,000-psi [51,710- and 6,947-kPa] pressurerated designs M aximum compression of follower spring to ensure positive slip engagement during pressure reversals Single-trip retrieval using tubing and an on/off tool The Versalok conventional wireline-set packer features the versatility of a multipurpose packer. The Versalok packer features a bypass system that equalizes pressure across the packer prior to releasing the upper slips, while a spring above the upper slips assures positive slip engagement during extreme pressure reversals. An innovative rotational release system eliminates any potential for premature release problems. Main features Wireline-set Retrievable For use in conventional completions Setting features The Versalok retrievable production packer provides a full-opening mandrel compatible with standard tubing profile nipples. The wireline setting feature makes the Versalok packer well suited for applications requiring fiberglass production tubing. Versalok conventional wireline-set packer. 32

29 Versalok Versalok Conventional Wireline-Set Packer Specifications Casing OD, Casing Weight Range, lbm/ft [kg/m] Tool OD, Max., Tool ID, Max., Standard Thread Connections Box Pin 4.5 [114.3] [ ] 3.75 [95.25] [49.225] EU 8 RD 5 [127.00] [ ] [ ] [49.225] EU 8 RD 5 [127.00] [ ] 4 [ ] [49.225] EU 8 RD 5.5 [139.70] [ ] [ ] [50.800] EU 8 RD 5.5 [139.70] [ ] [ ] [50.800] EU 8 RD 5.5 [139.70] [ ] 4.5 [114.3] [50.800] EU 8 RD 5.5 [139.70] [ ] [ ] [60.325] EU 8 RD 5.5 [139.70] [ ] [ ] [60.325] EU 8 RD 5.5 [139.70] [ ] 4.5 [114.3] [60.325] EU 8 RD 7 [177.80] [ ] 6 [152.4] [63.500] EU 8 RD 7 [177.80] [ ] [ ] [63.500] EU 8 RD [ ] [ ] [ ] [63.500] EU 8 RD [ ] [ ] [ ] [63.500] EU 8 RD Copyright 2014 Schlumberger. All rights reserved. 14-CO

30 34

31 ESP/Dual Completion Packers 35

32 Ultra Dual Conventional dual-completion packer Dual- and ESP completions Multizone completions BENEFITS Straight-pull shear release is not affected by differential pressure Design features configurable end connections FEATURES One-trip hydraulic operation Scoop head for short-string stabbing available for some sizes Sequential upper slip releasing system for reduced releasing force Able to be set on long or short string Long string straight-pull shear release Rating of 5,000 psi [34,473 kpa] at 275 degf [135 degc] Integral thread and sealbore for anchoring and sealing short strings The Ultra Dual conventional dual-completion packer is a dual-zone completion packer rated to 5,000 psi [34,473 kpa] at 275 degf [135 degc], featuring an integral hydraulic-setting assembly for one-trip operation. Plugging the string and applying pressure energize the hydraulic cylinder and set the packing elements, isolating the individual tubing strings. The packer releases by a straight pull on the long string. Both strings are available with optional tubing connections for maximum design flexibility. Main features Hydraulic-set Retrievable For use in dual- and ESP completions Ultra Dual conventional dual-completion packer. 36

33 Ultra Dual Ultra Dual Conventional Dual-Completion Packer Specifications Casing Size, 5.75 [146.05] [168.28] 7 [177.80] [193.68] [244.48] Casing Weight Range, lbm/ft [kg/m] Casing ID, Min., Casing ID, Max., OD of Tool, Max., Long-String Tool, Min., Short-String Tool, Min., Long-String Connection Short-String Connection [ ] [130.61] [127.00] [122.23] [40.89] [35.05] [ ] [130.61] [127.00] [122.23] [40.89] [35.05] sealbore top of latch [ ] [134.16] [130.61] [125.40] [40.89] [35.05] [ ] [134.16] [130.61] [125.40] [40.89] [35.05] sealbore top of latch [ ] [150.39] [153.45] [146.05] [49.23] [40.89] [ ] [150.39] [153.45] [146.05] [49.23] [40.89] sealbore top of latch [ ] [150.37] [154.79] [146.05] [49.23] [40.89] [ ] [150.37] [154.79] [146.05] [49.23] [40.89] sealbore top of latch [ ] [154.79] [160.93] [150.80] [49.23] [40.89] [ ] [154.79] [160.93] [150.80] [49.23] [40.89] sealbore top of latch [ ] [157.07] [166.07] [152.40] [49.23] [49.23] [ ] [157.07] [166.07] [152.40] [49.23] [49.23] sealbore top of latch [ ] [165.35] [174.80] [164.34] [60.71] [60.71] [ ] [169.21] 7.07 [179.73] [169.60] [60.71] [60.71] [ ] [216.79] [220.50] [211.33] [74.65] [74.65] [ ] [220.50] [226.59] [215.90] [74.65] [74.65] Copyright 2014 Schlumberger. All rights reserved. 14-CO

34 Hydro-12 Dual-completion packer Vertical, deviated, or horizontal wellbores Dual production strings BENEFITS Simultaneous running of tubing strings saves rig time FEATURES Can be set by the short or long string No tubing manipulation required to set the packer No mandrel movement during setting Simultaneous mandrel movement while the packer is being released One-piece mandrel designed with premium connections Setting not affected by tubing weight below the packer Both mandrels free to rotate May be run with dual strings simultaneously Tubing may be pulled without disturbing the packer Mechanical locks that prevent premature setting Ability to set the packer after the wellhead is installed Elimination of mandrel movement during setting for use in ESP installations The Hydro-12* dual-completion packer can be run in stacked dual installations or above almost any type of single-string packer. The unique design allows the packer to be set without tubing manipulation, and both mandrels are free to rotate for ease of makeup. In addition, the short string does not move during setting, which simplifies tubing space out. Orientation of the string is performed by using an optional locking mechanism. Main features Hydraulic-set Retrievable For use in dual completions Setting operation The packer is set by plugging the tubing below the setting ports in the packer and applying pressure to the setting string. Common plugging devices include pumpout plugs, pressure trip subs, and blanking plugs. The bidirectional slips anchor the packer in the casing, keeping the packer from moving upward or downward in response to differential pressure or tubing movement. This packer is suitable for applications requiring installation of the wellhead before packer setting because no tubing manipulation or movement is required. Release operation The Hydro-12 packer is released by a straight upward pull on either the short or the long string or simultaneously on both strings until the packer s primary shear pin value is exceeded. When the packer is released, the primary and secondary mandrel movements are simultaneous. This feature permits the use of ESPs. Hydro-12 dual-completion packer. 38

35 Hydro-12 Hydro-12 Dual-Completion Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Primary, Nominal ID, Secondary, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [177.8] [ ] [154.7] [49.6] [49.6] 275 [135] 5,000 [34,474] [244.5] [ ] [216.8] [60.9] [60.9] 275 [135] 5,000 [34,474] [244.5] [ ] [216.8] [57.2] [57.2] 275 [135] 5,000 [34,474] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

36 MRP-ESP Modular dual-completion packer ESP completions Zonal isolation Vertical, deviated, or horizontal wellbores BENEFITS Simplified operations reduce rig costs FEATURES Hydro-test capability of feed-through connections Ability to pressure test the system at the surface Minimized tubing movement during installation Reduced debris buildup above slips Easy to circulate out debris before retrieval Positive casing grip secures packer Slips located below sealing element Equalization system above the element Adjustable, straight-pull shear release Field-proven sealing element Bidirectional slips Minimized end effect on shear-release screws Dual bore with multiple ports The MRP-ESP modular dual-completion packer is used in vertical and deviated wells with ESP completions. Additional parallel ports are available and may be configured for chemical injection, gas vents, and ESP accessories. This packer is also designed to allow onsite feedthrough and connection of electric or hydraulic conduits. Its compact, modular design makes the MRP-ESP packer an economical choice for production applications with ESPs or for gas injection. Main features Hydraulic-set Retrievable For use in ESP completions Designed and tested in accordance with ISO V3 Installation and setting The MRP-ESP packer is installed with the completion tubing and is set by applying pressure to the tubing. Retrieval of the MRP-ESP packer is accomplished with a straight upward pull on the tubing. Once the tension on the tubing string exceeds the shear value of the release pins, the slips disengage the casing, and the element relaxes. Set at the factory to a standard value, the packer shear-release mechanism can be adjusted in the field just before installation. Cross-section. MRP modular dual-completion packer. 40

37 MRP-ESP MRP-ESP Modular Dual-Completion Packer Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Primary, Nominal ID, Secondary, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] Number of Feed-Throughs [244.5] [ ] [215.0] [76.0] [52.8] 250 [121] 5,000 [34,474] Three 3 8 NPT, one 3 4 NPT [244.5] [ ] [212.2] [76.0] [52.8] 250 [121] 5,000 [34,474] Six 3 8 NPT Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. National Pipe Thread. Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

38 42

39 High Rate Gas Packers 43

40 XHP-BB Hydrostatically set big-bore premium production packer High-rate production and injection wells with high or low temperatures Interventionless single-trip completions, desirable in environments such as deepwater and subsea wells Vertical, deviated, and horizontal wellbores Through-tubing recompletions BENEFITS Minimized rig time associated with standard setting methods Elimination of tubing movement Fewer interventions necessary while setting Ease of retrievability FEATURES Large-bore ID Barrel-type slip design that minimizes casing damage Slip location below sealing element Hydrostatic setting mechanism with built-in hydraulic contingency Robust seal that acts as debris barrier to prevent slip fouling Low activation pressures at surface Leak-free hydrostatic chamber to ensure packer activation at proper depth Cut-to-release retrieval Direct connection to well tubing Field-proven design based on XHP, XMP, and QUANTUM MAX* packers The XHP-BB* hydrostatically set big-bore premium production packer is designed for high-rate production and injection wells. These wells demand exceptional ruggedness and reliability, and, for harsh environments, require premium metallurgy and elastomers. The packer is qualified for lowtemperature use in subsea injection wells, as well as for high-pressure, high-temperature environments. It withstands pressures up to 10,000 psi [68,948 kpa] and temperatures up to 350 degf [177 degc]. The XHP-BB packer is designed for closed systems, such as cased hole wells before perforating and openhole completions isolated by a formation isolation valve. Main features Hydrostatic-set Retrievable For use in high-pressure and high-rate gas environments Hydrostatic setting The XHP-BB packer is installed with the completion tubing and set by pressuring the well at the surface. Rupture discs isolate the setting chamber and ensure accurate activation pressure. Because the packer is hydrostatically set, it is ideal for interventionless single-trip completions. Optionally, it can also be fully set by placing a tubing plug below it and applying pressure. The XHP-BB packer s setting chambers are located between the slips and the element. This architecture eliminates any tubing movement relative to the casing, and as a result, the slips and element are both set consistently and predictably. The slips barrel-type design minimizes casing damage, and their location below the sealing element prevents buildup of debris above them. Cut-to-release retrieval The packer s cut-to-release feature allows multiple throughtubing interventions without the risk of unsetting the packer. The XHP-BB packer is retrieved with a through-tubing intervention tool to shear the setting mechanism and then a subsequent upward pull on the tubing. Testing beyond ISO standards Each XHP-BB packer is internally tested with nitrogen to ensure that the hydrostatic chamber is leak-free and will activate the packer at the proper depth. The packer is tested beyond ISO 14310/API 11D1 standards for the flow-by qualification, which ensures that element swab-off rates are quantified, and it meets the ISO 14310/API 11D1 grade V0 standard for the as-rolled customer-specific casing. XHP-BB hydrostatically set big-bore premium production packer. Element VO rated Premium barrel slips Ensure even distribution of load on casing Cut-to-release zone Prevent premature release 44

41 XHP-BB XHP-BB Hydrostatically Set Big-Bore Premium Production Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [177.8] [ ] [150.1] [99.6] 350 [177] 10,000 [68,948] [244.5] [ ] [210.8] [150.4] 350 [177] 10,000 [68,948] Other sizes are available on request. ID may vary depending on connection configuration selected. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

42 46

43 HPHT Packers 47

44 XHP Premium production packer Single-string production Single-trip completions Vertical, deviated, or horizontal wellbores Production or injection wells with high or low temperatures ADVANTAGES Slips located below the sealing element Hydraulic-setting mechanism design that eliminates tubing movement during installation Minimized debris buildup above slips Reduced casing damage Suitable for use in unsupported casing Capable of running in deviated wells Tensile and compressive ratings compatible with completion tubulars Able to connect directly to well tubing Barrel-type slip design Short packer body length Premium connections available The XHP premium production packer is a hydraulically set, retrievable packer for use in vertical and deviated wells. Main features Hydraulic-set Retrievable For use in HPHT environments Designed and tested in accordance with ISO V0 High-pressure, high-temperature environments The standard version of XHP packer is suitable for high-pressure, high-temperature environments. It is also qualified for lowtemperature use in subsea injection wells. Installation and retrieval The XHP packer is installed with the completion tubing and is set by applying pressure to the tubing. Retrieval of the XHP is accomplished by means of a through-tubing intervention tool and subsequent upward pull on the tubing. Design flexibility provides the following configuration options: setting on control line left-hand rotation disconnect retrieval by intervention with a tubing cutter. XHP premium production packer. 49

45 XHP XHP Premium Production Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [177.8] [ ] [147.6] [73.4] 325 [163] 10,000 [68,948] [196.9] 46.1 [68.60] [163.6] [69.9] 425 [218] 10,000 [68,948] [193.7] [ ] [163.6] [85.1] 325 [163] 10,000 [68,948] [244.5] [ ] [210.8] [118.4] 350 [177] 10,000 [68,948] [273.1] [ ] [237.2] [116.8] 270 [132] 7,500 [51,711] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

46 Intelligent Completion Packers 51

47 MRP-MP Modular multiport packers Intelligent completions Single-trip completions Completions with multiple production zones Vertical or deviated wellbores BENEFITS Reduced development costs with production from multiple zones Reduced completion costs because of economical feed-through packer platform Reduced retrieval risk due to prevention of debris buildup above slips Reduced risk of misruns by eliminating pipe movement during installation FEATURES Flexible configurations that facilitate varied completion designs Communication with devices installed below the packer enabled by five hydraulic control lines or electrical conduits Modular platform based on economical and field-proven Schlumberger MRP modular retrievable packer Configuration options to suit multiple applications: straight pull-to-release, cut-to-release, and isolation Slips located below sealing element Hydraulic setting mechanism centrally located between element and slips Configurations that can maintain premium connections throughout the tubing string The MRP-MP packer series consists of tubingconveyed, hydraulically set production and isolation packers designed for single or multizone completions. Each packer features a multiplebypass configuration for hydraulic control line or electric conduit applications. Main features Hydraulically set Retrievable For use in intelligent completions Setting operation The packer is set by applying tubing-to-annulus differential pressure. A closed flow control valve or valves, a ball seat, and a plug or other tubing-blanking device are required to set the packer. The retrieval method depends on the configuration chosen. MRP-MP production packer. MRP-MP isolation packer. 52

48 MRP-MP MRP-MP Modular Multiport Packer Specifications (Straight Pull-to-Release) Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [177.8] [ ] [154.7] [74.22] 250 [121] 5,000 [34,474] [177.8] [ ] [152.4] [74.22] 250 [121] 5,000 [34,474] [177.8] [ ] [150.1] [74.22] 250 [121] 5,000 [34,474] Affected by shear-to-release setting. MRP-MP Modular Multiport Packer Specifications (Cut-to-Release) Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [177.8] [ ] [154.7] [74.22] 250 [121] 5,000 [34,474] [177.8] [ ] [152.4] [74.22] 250 [121] 5,000 [34,474] MRP-MP Modular Multiport Packer Specifications (Isolation Packer) Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [177.8] [ ] [154.7] [74.22] 250 [121] 3,000 [20,684] [177.8] [ ] [152.4] [74.22] 250 [121] 3,000 [20,684] [177.8] [ ] [150.1] [74.22] 250 [121] 3,000 [20,684] MRP-MP Modular Multiport Packer Specifications (Straight Pull-to-Release Performance) Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [177.8] [ ] [154.7] [74.22] 250 [121] 5,000 [34,474] [177.8] [ ] [152.4] [74.22] 250 [121] 5,000 [34,474] [177.8] [ ] [150.1] [74.22] 250 [121] 5,000 [34,474] Copyright 2014 Schlumberger. All rights reserved. 14-CO

49 QUANTUM MultiPort Gravel-pack multiport packer Intelligent completions Normal and hostile environments BENEFITS Simplified operations reduce rig costs FEATURES Unique design for preset prevention Enhanced capabilities for onsite product customization Simultaneous setting of multiple packers for reduced rig time Pressure-isolated multiple ports Locking screws on the body joints Packing element with integral antiextrusion rings Component parts rotationally locked to the mandrel Straight pickup release The QUANTUM* MultiPort* gravel-pack multiport packer is used as the upper packer in stacked configurations in completions with surfacecontrolled subsurface flow-control valves and tubing-mounted reservoir monitoring equipment. Main features Hydraulic-set Retrievable For use in intelligent completions Designed and tested in accordance with ISO V3 Connections and setting The hydraulically set QUANTUM MultiPort packer features twin setting pistons that fully energize the sealing elements prior to anchoring the slips. This packer is designed to allow onsite feed-through and connection of electric and hydraulic conduits. Testing of control-line fittings on the packer is accomplished after feed-through. This feature greatly simplifies rig operations and reduces control line terminations. The packer features a one-piece mandrel design with an eccentric flow bore. Release Bypass lines are fixed relative to the mandrel, eliminating relative movement during releasing. This design facilitates release regardless of the prevailing tubing load condition, i.e., tension or compression at the packer. The QUANTUM MultiPort packer allows simultaneous setting of multiple packers and is capable of simultaneous testing of bypass seals on the rig floor. Retrieval of the QUANTUM MultiPort packer is accomplished by means of a through-tubing intervention tool and subsequent upward pull on the tubing. QUANTUM MultiPort packers are available for a variety of service applications, including H 2 S and CO 2 environments. QUANTUM MultiPort Gravel-Pack Multiport Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] [177.8] [ ] [152.2] [74.7] 250 [121] [244.5] [ ] [214.5] [74.7] 250 [121] [244.5] [ ] [212.0] [74.7] 250 [121] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. QUANTUM MultiPort gravel-pack multiport packer. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

50 XMP Premium multiport production packer Single- and dual-zone completions Single-trip completions Intelligent completions ADVANTAGES Capable of surface test For running in vertical, deviated, or horizontal wellbores No damage to the casing Eliminated pipe movement by setting mechanism design Tensile and compressive ratings compatible with completion tubulars Short packer body length Slip below the element protected from debris Barrel slip design suitable for unsupported casing Premium elastomers and metallurgy Anti-preset and anti-reset mechanism Centrally located hydraulic setting mechanism Retrievable design to eliminate damage associated with milling Multiple bypass ports for feed-through of hydraulic and electric lines Available in control line set configurations The XMP premium multiport production packer is a tubing-conveyed, hydraulic-set, retrievable packer designed for intelligent completions. It features a multiple-bypass configuration for hydraulic control line or electric conduit applications. Main features Hydraulic-set Retrievable For use in intelligent completions Designed and tested in accordance with ISO V0 Operation The XMP packer is installed with the completion tubing and is set by applying pressure to the tubing. Retrieval of the XMP packer is accomplished by means of a through-tubing intervention tool and subsequent upward pull on the tubing. The flexible design of the XMP allows it to be ordered with several configuration options: left-hand rotation disconnect retrieval by intervention with a tubing cutter. XMP premium multiport production packer. 55

51 XMP XMP Premium Multiport Production Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] [177.8] [ ] [152.4] [73.2] 325 [163] 10,000 [68,948] [177.8] [ ] [147.6] [73.2] 350 [177] 10,000 [68,948] [244.5] [ ] [210.8] [116.8] 350 [177] 10,000 [68,948] [273.1] [ ] [237.2] [116.8] 270 [132] 7,500 [51,711] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. Differential Pressure Rating, psi [kpa] Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

52 Sand Control Packers 57

53 QUANTUM Gravel-pack packer Stand-alone screen applications Production or drillstem testing Single and multizone completions Vertical, highly deviated, and horizontal wellbores BENEFITS Large-bore design maximizes production Improved performance parameters increase reliability and reduce risk FEATURES Sealbore retrievable packer Hydraulic setting with various QUANTUM* service tools Element selection that includes hydrogenated nitrile butadiene rubber (HNBR), Viton, and Aflas Torque-through feature that allows rotation Conformance to NACE standard MR0175 The QUANTUM gravel-pack packer is specifically designed to increase reliability and improve all aspects of sand control operations. The rugged QUANTUM packer is the core component of the QUANTUM gravel-pack completion system, which is specifically designed for single-trip production gravel packing in vertical, deviated, and horizontal wells. Main features Hydraulic-set Retrievable For use in gravel-pack completions and sand management Configurations and operation The QUANTUM packer is available in standard and large-bore configurations, allowing seal assembly IDs to match production tubing IDs. The large-bore design allows for multiple completions in which the lower production tubing must pass through an upper packer assembly without damaging the sealbores. All operations are completed with pressure and vertical movement and do not require rotation. Retrieval and milling QUANTUM packers are designed to be retrieved with straight pull or to be milled if necessary. These packers can be set on wireline and retrieved using an internal retrieving tool. They feature one-piece self-energizing packing elements and one-piece bidirectional slips that reduce the risk of loss during retrieval or milling. The slips are located below the packing element for maximum protection from debris fouling. Meeting standards The QUANTUM packer s flow-wetted components are manufactured from materials that comply with NACE standard MR0175 for sulfide stress cracking-resistant metallic materials. The QUANTUM packer can be set by a variety of QUANTUM services tools, including the Type 3, the cased hole gravel- and frac-pack tools, and various wireline-setting tools. QUANTUM gravel-pack packer. 58

54 QUANTUM QUANTUM Gravel-Pack Packer Specifications Casing Packer Size, Weight Range, lbm/ft [kg/m] Max. OD, Sealbore, [127.0] [ ] [108.0] [ ] [100.8] [68.1] [139.7] [ ] [117.5] [76.2] [ ] [154.5] [177.8] [ ] [152.3] [ ] [147.8] [101.6] 38 [56.55] [146.3] [ ] [169.3] [193.68] [ ] [167.6] [101.6] 39 [58.04] [164.0] [ ] [218.7] [152.4] [ ] [214.5] [120.7] [244.5] [152.4] [ ] [211.7] [120.7] [152.4] Max. Differential Pressure, psi [kpa] 6,000 [41,370] 6,000 [41,370] *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

55 QUANTUM MAX HPHT gravel- and frac-pack packer Cased hole gravel packs and frac packs Openhole gravel packs Stand-alone screen applications Production or drillstem testing packer Single and multizone completions Vertical, highly deviated, and horizontal wellbores BENEFITS Large-bore design maximizes production Improved performance parameters increase reliability and reduce risk FEATURES Sealbore retrievable packer Hydraulic setting with various QUANTUM MAX* service tools Barrel-slip design that distributes tensile and compressive loading on casing X-series hydrogenated nitrile butadiene rubber (HNBR) or Aflas element, with high flow-by capability Torque-through feature that allows rotation The QUANTUM MAX HPHT gravel- and frac-pack packer is the latest generation of Schlumberger sealbore retrievable packers. The QUANTUM MAX packer is the core component of the high-pressure, high-temperature (HPHT) gravel-pack system and is suitable for STIMPAC* fracturing and gravel-packing service treatments. It can also be used as a stand-alone production or drillstem test (DST) packer. Main features Hydraulic-set Retrievable For use in HPHT gravel- and frac-pack application ISO V3 qualified Qualifications and certifications All QUANTUM MAX packers are ISO V3 qualified. Various sizes and configurations have been further qualified in excess of ISO V0 standards. Various metallurgies are available for various downhole conditions and differential pressure requirements. The QUANTUM MAX packer s flow-wetted components are manufactured from materials that comply with NACE standard MR0175 for sulfide stress cracking-resistant metallic materials. Barrel slip design The QUANTUM MAX packer uses a barrel slip design, permitting high tensile and compressive loading without deformation to the casing. The one-piece X-series elements withstand differential pressures at both high and low temperatures. The element design also permits high run-in-hole speeds and circulations rates without concern for swab setting of the packer. Elements are available in HNBR and Aflas materials. Multiple sizes Available in a variety of common oilfield casing sizes, the QUANTUM MAX large-bore design facilitates multiple completions and maximizes productivity. All components within the packer are rotationally locked, permitting rotation while running in hole. The QUANTUM MAX packer can be retrieved via the QUANTUM MAX retrieving tool. If required, it can be milled. The QUANTUM MAX packer can be set by a variety of QUANTUM MAX services tools, including the Type 3, the cased hole gravel- and frac-pack tools, and openhole antiswab tools. QUANTUM MAX HPHT graveland frac-pack packer. 60

56 QUANTUM MAX QUANTUM MAX HPHT Gravel- and Frac-Pack Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [127.0] 18 [26.79] [104.3] [68.3] 350 [177] 10,000 [68.948] [127.0] 21.4 [31.85] [100.5] [68.3] 350 [177] 10,000 [68.948] [139.7] [ ] [119.9] [76.3] 350 [177] 10,000 [68.948] [139.7] 20 [29.76] [117.0] [76.3] 350 [177] 10,000 [68.948] [139.7] 23 [34.23] [114.3] [76.3] 350 [177] 10,000 [68.948] [177.8] [ ] [152.4] [101.7] 350 [177] 10,000 [68.948] [177.8] [ ] [147.6] [101.7] 350 [177] 10,000 [68.948] [193.7] [ ] [169.9] [101.7] 350 [177] 10,000 [68.948] [193.7] [ ] [163.6] [101.7] 350 [177] 12,500 [86.184] [244.5] [69.94 XX] [210.8] [120.7] 350 [177] 10,000 [68.948] [244.5] 53.5 [79.62] [214.1] [143.5] 350 [177] 15,000 [ ] [244.5] [ ] [214.4] [152.5] 350 [177] 10,000 [68.948] [244.5] 53.5 [79.62] [210.8] [152.5] 350 [177] [68.948] [273.1] [ ] [237.2] [152.5] 250 [121] 10,000 [68.948] Additional temperature and pressure ratings available on request. Including in, 46.1 ppf casing Including heavy-weight in, 10-in, and in casing with in drift. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

57 QUANTUM HS Gravel-pack sealbore packer Deviated wells Single-trip systems Production or isolation wells requiring a sealbore packer Gravel-pack operations requiring a sealbore packer ADVANTAGES Hydraulically set Interlocked packer and hydraulic locator Compatible with QUANTUM* packer system accessories Easy running and setting with production string Minimal disengagement while running and setting The QUANTUM HS gravel-pack sealbore packer is set with tubing pressure and released from a specially designed seal assembly with annular pressure. The top connection and internal profile are identical to the QUANTUM packer, allow ing compatibility with all QUANTUM accessories. QUANTUM HS packers may be run and set with the hydraulic-release anchor seal assembly or the QUANTUM anchor seal assembly. The hydraulic-releasing anchor is a seal assembly equipped with an external hydraulic release and does not require rotational operations. A QUANTUM retrieving tool is used to retrieve the packer. Main features Hydraulic-set Retrievable For use in gravel-pack completions Design and components These packers feature single, one-piece, bidirectional slips and standard packing elements and seals; in emergencies, they are millable using conventional packer milling tools. The QUANTUM HS packer s flow-wetted components are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials. QUANTUM HS gravel-pack sealbore packer. 62

58 QUANTUM HS QUANTUM HS Gravel-Pack Sealbore Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] [177.8] [ ] [152.3] [100.5] 350 [177] 6,000 [41,369] [193.7] [ ] [169.8] [101.7] 250 [121] 6,000 [41,369] [193.7] [ ] [167.8] [101.7] 250 [121] 6,000 [41,369] [193.7] 39 [58.04] [164.3] [101.7] 250 [121] 6,000 [41,369] [244.5] [ ] [214.5] [152.5] 250 [121] 5,000 [34,474] [244.5] [ ] [211.3] [152.5] 250 [121] 5,000 [34,474] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

59 QUANTUM HSB Gravel-pack dual-bore and sealbore packer Dual-bore completions Gravel-pack completions High-rate production wells requiring a production packer BENEFITS Design is compatible with QUANTUM* packer system Design eliminates tubing rotation FEATURES Large sealbore Hydraulic setting Bidirectional slips below sealing element for maximum protection from debris fouling Conformance to NACE MR0175 standards The QUANTUM HSB gravel-pack dual-bore and sealbore packer s seal assembly combines with the large bore of the packer to allow a full tubing ID. This packer is ideally suited for multiple completion options or zones, including single-selective and dual completions. Single-completion configurations benefit from the packer s large internal diameter, which is essential for high-rate production applications. Main features Hydraulic-set Retrievable For use in gravel-pack completions Setting operation This retrievable packer is hydraulically set. No tubing rotation is required to fully set the packer. It has a one-piece, self-energizing packing element and features bidirectional slips below the packing element for maximum protection from debris fouling. This location protects the slips from being lost during retrieval or milling. Configuration The QUANTUM HSB stepbore packer is available in a variety of configurations, including sealbore lengths up to 20.0 ft [6.10 m]. It is compatible with QUANTUM packer accessories, including gravel-pack service tools, seal assemblies, and QUANTUM packer retrieving tools. The QUANTUM HSB packer s flow-wetted components are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials. QUANTUM HSB gravel-pack dual-bore and sealbore packer. 64

60 QUANTUM HSB QUANTUM HSB Gravel-Pack Dual-Bore and Sealbore Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] Differential Pressure Rating, psi [kpa] Upper Sealbore Nominal ID, [177.8] [ ] [154.5] [100.3] 250 [121] 6,000 [41,369] [120.7] [177.8] [ ] [152.3] [100.3] 250 [121] 6,000 [41,369] [120.7] [244.5] [ ] [214.5] [152.5] 250 [121] 6,000 [41,369] [181.0] [244.5] [ ] [211.5] [152.5] 250 [121] 5,000 [34,474] [181.0] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

61 66

62 Service Packers 67

63 CA-3 Compression packer Production completions Well-treating operations ADVANTAGES Simple setting and releasing procedure Case-hardened friction blocks with INCONEL springs Fullbore mandrel Right-hand rotation emergency release Field-proven design Field-adjustable safety release Emergency disconnect for secure operations The CA-3 compression packer is generally used in production or treating applications. The simplicity and rugged design of this packer yield an extremely reliable product. Main features Mechanically set Retrievable For use in conventional completions Setting and operation The CA-3 packer is run to setting depth, making the last tubing movement upward. Right-hand torque is applied to the tubing. While right-hand torque is applied, the tubing is lowered and the appropriate amount of set-down weight is applied to the packer. The CA-3 packer is released by simply picking up on the tubing. This operation will position the packer in the running position, and the CA-3 packer can be either retrieved or moved and reset. The CA-3 packer features a right-hand release safety joint for emergency disconnect. CA-3 compression packer. 68

64 CA-3 CA-3 Compression Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, [177.8] [ ] [154.4] [62.0] 275 [135] [244.5] [ ] [214.3] [100.5] 275 [135] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. Max. Working Temperature, degf [degc] Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

65 Omegamatic Service packer Squeeze cementing Acidizing Formation fracturing Testing operations BENEFITS Operational efficiency reduces rig time FEATURES Reliable, three-piece, dual-durometer sealing element and a large internal bypass result in dependable, trouble-free operation Reversing piston keeps bypass closed at high tubing pressures Field-proven design The Omegamatic* service packer has an internal reversing piston to help keep the bypass system closed at high tubing pressures. It uses piston-type hold-down buttons, a three-piece dual-durometer sealing element system, and a large internal bypass for reliable, trouble-free performance. Main features Mechanically set Retrievable For use in squeeze cementing, acidizing, fracturing, and testing applications Holding pressure The Omegamatic packer holds pressure from above and below the packer. Its lower slips are set against a lower cone and drag block housing, and the hold-down buttons are hydraulically actuated when pressure below the packer exceeds pressure above the packer. Designed for simple, trouble-free operations, the rugged Omegamatic packer is available with either manual or automatic jays. It can be set with either a right or a left quarter-turn rotation and applied tubing weight. Omegamatic service packer. Omegamatic Service Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, Max. Working Temperature, degf [degc] [114.3] [ ] [95.8] [49.2] 275 [135] [139.7] [ ] [121.4] [50.7] 275 [135] [139.7] [ ] [117.9] [50.7] 275 [135] [139.7] [ ] [114.3] [50.7] 275 [135] [146.1] [ ] [124.6] [50.7] 275 [135] [146.1] [ ] [121.4] [50.7] 275 [135] [168.3] [ ] [143.0] [62.0] 275 [135] [168.3] [ ] [139.4] [62.0] 275 [135] [177.8] [ ] [154.4] [62.0] 275 [135] [177.8] [ ] [151.6] [62.0] 275 [135] [177.8] [ ] [147.8] [62.0] 275 [135] [244.5] [ ] [214.4] [100.5] 275 [135] [244.5] [ ] [208.9] [100.5] 275 [135] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

66 Omegamatic Long-Stroke Nonrotational squeeze packer Completions with restricted or no tubing rotation Challenging environments Squeeze cementing, acidizing, formation fracturing, or testing operations BENEFITS Operational efficiency reduces rig time Packer design allows setting without rotation for reliable operations in deviated wells FEATURES Reliable three-piece, dual-durometer sealing element and a large internal bypass for dependable, trouble-free operation Reversing piston to keep bypass closed at high tubing pressures Field-proven design The Omegamatic Long-Stroke* nonrotational squeeze packer is used for squeeze cementing, acidizing, formation fracturing, or testing. It is suitable for any application where tubing rotation is restricted or not possible. Main features Mechanically set Retrievable For use in squeeze cementing, acidizing, fracturing, and testing applications Three-piece sealing element Based on the field-proven Omegamatic* packer design, Omegamatic Long-Stroke packers hold pressure from above and below the packer. They feature piston-type hold-down buttons, a three-piece sealing element, and a large internal bypass for reliable and trouble-free performance. Omegamatic Long-Stroke packers have a reversing piston to keep the bypass closed at high tubing pressures, and they are available with standard or optional carbide insert slips and hold-down buttons. The Omegamatic Long-Stroke packer s lower slips are set against a lower cone and drag block housing, and the hold-down buttons are set by hydraulic actuation when pressure below the packer exceeds pressure above the packer. Setting and release Omegamatic Long-Stroke packers utilize a continuous jay with an extended stroke and only require up or down reciprocation of the tubing to set and release the packer. This allows the packer to be set and released to the retrieving position without tubing rotation. The extended stroke also allows the packer to be released, circulated around, and reset in the same position without leaving the setting position of the jay. Omegamatic Long-Stroke packers are available in various casing sizes and with or with out hold-down buttons. Omegamatic Long-Stroke Nonrotational Squeeze Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, [127.0] [ ] [104.8] [31.8] 275 [135] [139.7] [ ] [121.4] [38.1] 275 [135] [177.8] [ ] [154.4] [57.2] 275 [135] [177.8] [ ] [151.6] [57.2] 275 [135] [193.7] [ ] [169.5] [57.2] 275 [135] [244.5] [ ] [208.9] [76.2] 275 [135] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. Max. Working Temperature, degf [degc] Omegamatic Long-Stroke packer. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

67 SA-3 Tension packer Production completions and well-treating operations ADVANTAGES Simple setting and releasing procedure Case-hardened friction blocks with INCONEL springs Fullbore mandrel Secondary rotational release Field-proven design Field-adjustable secondary rotational release Tubing able to be left in tension, compression, or neutral condition Pressure equalization before unsetting the slips The SA-3 tension packer is generally used in injection applications or where thermal shrinkage of the tubing is expected, such as treating operations. Since the SA-3 is a tension-set packer, it is also ideally suited for shallow wells where tubing pressure is likely to exceed annulus pressure. Main features Mechanically set Retrievable For use in conventional completions Setting operation The SA-3 packer is run to setting depth, making the last tubing movement downward. Right-hand torque is applied to the tubing. While right-hand torque is applied, the tubing is picked up and the appropriate amount of tension is applied to the packer. Release operation The SA-3 packer is released by applying left-hand torque to the tubing while lowering the tubing. This operation will position the packer in the running position, and the SA-3 packer can either be retrieved or moved and reset. The SA-3 packer incorporates an adjustable shear release. Pulling with a predetermined amount of tension will shear a set of screws to release the compression on the sealing element and slips so the packer can be retrieved. If required, the packer may be converted to a nonshear version. SA-3 tension packer. 72

68 SA-3 SA-3 Tension Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, [114.3] [ ] [95.6] [50.7] 275 [135] [139.7] [ ] [118.3] [61.9] 275 [135] [177.8] [ ] [154.4] [61.9] 275 [135] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. Max. Working Temperature, degf [degc] Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

69 SOT-1 Conventional service packer Production completions Well-treating operations ADVANTAGES Simple setting and releasing procedure Case-hardened friction blocks with INCONEL springs Fullbore mandrel Secondary rotational release Field-proven design Field-adjustable secondary rotational release Tubing able to be left in tension, compression, or neutral Pressure equalization before unsetting the slips The SOT-1 conventional service packer is used for production completions and well-treating operations. Once set, the SOT-1 packer will remain set and packed off regardless of tubing forces and pressure differentials. This packer can be used in zone isolation, production, or injection applications. The simplicity and rugged design yield an extremely reliable freestanding packer. Main features Mechanically set Retrievable For use in conventional completions Setting operation The SOT-1 packer design allows the packer to be run to depth, set with minimal weight, then fully packed off with tubing tension. These design features allow the SOT-1 to be run at much shallower depths than most compression-set, double-grip packers. This packer also features a built-in fluid bypass system for equalizing pressure across the sealing element during the release procedure. The packer is run to setting depth and, with the last movement upward, right-hand torque is applied to the tubing. While right-hand torque is applied, the tubing is lowered until the weight indicator shows a reduction in tubing weight. Torque is then released, and the required amount of tubing weight is added to the packer. An upstrain is then placed on the tubing, and the recommended tension is applied to fully set the slips and pack off the sealing element. After the setting procedure has been completed, the tubing string may be landed in tension, compression, or neutral condition. Releasing operation The SOT-1 packer is released with 500- to 3,000-lbm [228- to 1,360-kg] weight on the packer while applying right-hand torque. Picking up the tubing opens the fluid bypass and equalizes pressure across the sealing element. Continued upward pulling releases the slips, fully relaxes the elements, and locks the SOT-1 in the running position. The packer can be retrieved or moved up and down the hole, and reset if required. The SOT-1 features a secondary rotational-release option. This method is activated by placing the tubing in neutral at the packer and applying right-hand torque to shear the brass shear screws in the jay pin ring. After the screws have been sheared, rotating the tubing at the packer will release the jay pin ring from the packer mandrel. Continued upward movement will fully release the packer. SOT-1 conventional service packer. 74

70 SOT-1 SOT-1 Conventional Service Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Max. OD, Nominal ID, [114.3] [ ] [95.6] [49.1] 325 [163] [127.0] [ ] [103.2] [49.1] 325 [163] [139.7] [ ] [117.9] [60.3] 325 [163] [139.7] [ ] [114.7] [60.3] 325 [163] [168.3] [ ] [143.0] [61.9] 325 [163] [168.3] [ ] [139.4] [61.9] 325 [163] [177.8] [ ] [154.6] [61.9] 325 [163] [177.8] [ ] [151.8] [61.9] 325 [163] [177.8] [ ] [147.9] [61.9] 325 [163] Other sizes are available on request. Contact your local Schlumberger representative. ID may vary depending on connecting configuration selected. Max. Working Temperature, degf [degc] Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

71 TXT Service packer Remedial work and service applications Acidizing Fracturing Squeeze cementing Casing test applications BENEFITS High running speed and ease of operations reduce rig time FEATURES 8,000 psi [55,158 kpa] nominal pressure rating Temperature rating based on elastomers Three-quarter right-hand turn and setdown weight to set packer Convertible to left-hand operation without replacing any components Carbide-inserted lower slip to provide large contact area and minimize casing damage 12-piston hydraulic holddown system with carbide-inserted slips to allow high differential pressure to be achieved below the packer Three-piece packing element Heavy-duty mandrel with locked top and bottom connections for high torque capacity Optional top and bottom tubing connections The TXT service packer is a heavy-duty, compression-set retrievable packer used to secure a well requiring repair or, in the case of an emergency, without retrieving the drillstring. The TXT packer is also well-suited to acidizing, fracturing, squeeze cementing, and casing testing applications. Main features Mechanically set Retrievable For use as a service packer Features and setting The TXT packer is rated to 8,000 psi [55,158 kpa]; other pressure and temperature combinations are possible with optional elements. Mechanically set, the TXT packer features a 12-piston system with carbide disks for both the upper slips and the caged lower slips, providing a large contact area while minimizing casing damage. The heavy-duty mandrel includes locked top and bottom subs available with optional top and bottom tubing connections. The TXT packer is set up as a right-hand tool, but it can be converted for left-hand operation without replacing any parts. TXT Service Packer Specifications Casing Size, Casing Weight Range, lbm/ft [kg/m] Casing ID, Min., Casing ID, Max., Tool Size Tool OD, Max., Thread Box Pin [244.48] [ ] [211.91] [220.49] 51A [97.87] 3.5 or 4.5 IF [244.48] [ ] [220.49] [224.41] 51A [208.74] or IF [244.48] [ ] [224.43] [230.20] 51B [214.30] 3.5 or 4.5 IF [273.05] [ ] [234.95] [242.82] 53A [281.26] or IF [273.05] [ ] [245.36] [247.90] 53A [228.60] 3.5 or 4.5 IF [273.05] [ ] [250.19] [257.18] 53B [238.13] or IF TXT service packer. Copyright 2014 Schlumberger. All rights reserved. 14-CO

72 TXT-2 Service packer Remedial work and service applications Acidizing Fracturing Squeeze cementing Casing test applications BENEFITS Maximum pressure performance High running speed and ease of operations reduce rig time FEATURES 8,000 psi [55,158 kpa] nominal pressure rating Large internal bypass area to maximize running and circulating rates Multiple hold-down button slip assembly for maximum pressure performance Three-piece packing element system for reliable, proven performance Multiple jay configurations available Convertible jay configuration with kit The TXT-2 service packer is a compression-set retrievable service packer used for remedial applications such as squeeze cementing, fracturing, acidizing, and other operations where high pressure differentials are required. Main features Mechanically set Retrievable For use as a service packer Setting and operation The collet releases during setting by applying tubing weight, which closes the bypass. Carbide-inserted drag blocks, carbideinserted slips, and a three-piece packing element system enhance packer performance. Hydraulic hold-down buttons are protected during running or circulating, minimizing damage potential. TXT-2 Service Packer Specifications Casing OD, Casing Weight Range, lbm/ft [kg/m] Casing ID Range, Min., Casing ID Range, Max., Tool OD, Max., Thread 4.5 [114.30] [ ] [99.57] [103.88] [95.50] EU 8 RD 5 [127.00] [ ] [108.61] [111.96] [104.39] EU 8 RD 5.5 [139.70] [ ] [118.62] [121.36] [114.30] EU 8 RD 5.5 [139.70] [ ] [121.36] [125.73] [117.86] EU 8 RD 5.5 [139.70] [ ] [125.73] [128.12] [120.90] EU 8 RD 5.75 [146.05] [ ] [127.97] [135.99] [122.35] EUE 8 RD 6.00 [152.40] [ ] [131.85] [136.91] [128.57] EUE 8 RD 6.625[168.27] [ ] [147.09] [150.37] [141.94] EUE 8 RD 7 [177.80] [ ] [152.50] [154.78] [147.62] EU 8 RD 7 [177.80] [ ] [157.07] [159.41] [151.13] EU 8 RD 7 [177.80] [ ] [159.41] [163.98] [154.38] EU 8 RD [193.67] [ ] [168.27] [171.83] [163.91] EU 8 RD [193.67] [ ] [171.83] [177.01] [167.46] EU 8 RD [193.67] [ ] [174.62] [178.43] [169.46] EU 8 RD [193.67] [ ] [178.43] [180.97] [173.02] EU 8 RD TXT-2 service packer. Copyright 2014 Schlumberger. All rights reserved. 14-CO

73 78

74 Swellable Packers 79

75 ResPack Swellable bonded-to-pipe packer Openhole and cased hole wells Multistage fracturing Reservoir compartmentalization Flowing wells with inflow control devices Straddle assemblies Cement replacement Annular barrier for sand screens BENEFITS Single-trip installation minimizes rig time, installation risks, and costs. Delayed swelling feature reduces risk of premature setting. Bonding and shorter element enhance well integrity. FEATURES Elastomer bonded directly onto basepipe Increased pressure rating per foot No moving parts Durable, self-healing and self-sealing construction Time-delayed reactive filler for improved mechanical stiffening properties Tuned curing process for balanced swell kinetics Maximized swelling capability due to pipe bonding Shorter element lengths, which are better able to traverse tight openhole sections and lateral transitions Associated predictor software for product selection and job planning The ResPack* swellable bonded-to-pipe packer is designed to swell on contact with fluid and expand to seal the annulus around the pipe. The elastomer is bonded directly onto the basepipe. The packer has no moving parts and is installed in a single trip; no special personnel or equipment is required. Applications range from well construction to completion in both openhole and cased hole wells. Swelling mechanism The packer element, which is shorter than typical packer elements, is engineered from a complex polymer that has properties similar to those of rubber before swelling. After swelling, the polymer and shorter element allow the packer to achieve the higher differential pressure and temperature ratings required in high-pressure applications such as multistage fracturing and sealing in flowing wells; the packer remains pliant enough to accommodate washouts and irregular wellbores. The packer is available with elements that swell in either oil or water. Oil-swellable packer An integral delay mechanism engineered into the polymer of the oil-swellable packer minimizes the risk of premature swelling and setting without the need for any additional exterior coating. Hydrocarbon molecules diffuse into the elastomer matrix to generate volumetric expansion. Water-swellable packer In the water swellable packer, reactive fillers integrated into the elastomer prevent the loss of strength and the deswelling effects seen in conventional water-swellable packers, which rely solely on osmosis for swelling. Osmosis can reverse over time, causing other packers to deswell and leak. The proprietary reactive technology, however, is based on an irreversible chemical reaction that mechanically reinforces the elastomer and enables higher differential pressures to be withstood by shorter lengths. This unique-to-schlumberger technology enables higher pressure ratings per foot than for conventional water swellable packers. ResPack swellable bonded-to-pipe packer. Completions 80

76 ResPack Sizes and ratings ResPack packers are provided in sizes ranging from 23 8 in to in. They have a wide temperature range, from 100 to 365 degf [37 to 185 degc] and a differential pressure rating of up to 15,000 psi [103 MPa], the highest psi/ ft rating in the industry. Swelling to first seal Swelling starts immediately after contact with the fluid (oil for the oilswellable packer and water for the water-swellable packer) and progresses in small increments, enabling the packer to reach the target setting depth, where it continues to swell and seal. Stringent qualifications Our packers undergo full-scale highly accelerated life cycle testing and are qualified to rigorous standards. Elastomers are tested in high concentrations of hydrogen sulfide (H 2 S), hydrochloric acid (HCl), and carbon dioxide (CO 2 ) at simulated downhole temperatures and pressures. Swell-prediction software Proprietary Schlumberger software is used to evaluate packer performance in various well environments. The software predicts the estimated swell time and pressure ratings for a certain hole ID. The results are used to select the appropriate packer and minimize risks during deployment. Differential pressure, psi 14,000 12,000 10,000 8,000 6,000 4,000 2,000 Differential Pressure as a Function of Swell Time 10 ft element 6 ft element 3 ft element Oil swell Swell time, per day The differential-pressure rating of oil-swellable packers is a function of the swell time and the element length. Differential pressure, psi 12,000 10,000 8,000 6,000 4,000 2,000 0 Differential Pressure as a Function of Swell Time 10 ft element 6 ft element 3 ft element Brine swell Swell time, per day The differential-pressure rating of water (brine)-swellable packers is a function of the swell time and the element length.. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

77 ResPack Slip Swellable slip-on packer Openhole and cased hole wells Long-term isolation Effective reservoir compartmentalization Inflow control device completions Straddle assemblies Gravel-pack assemblies Multistage matrix acidizing BENEFITS Single-trip installation minimizes rig time, installation risks, and costs. Modular design reduces and simplifies required inventory of metal and thread types, thereby saving costs. FEATURES Engineered delay mechanism, which eliminates need for external delay coatings Modular slip-on design with no moving parts Simple installation requiring no specialist personnel or equipment Associated predictor software for product selection and job planning The ResPack Slip* swellable slip-on packer is designed to swell on contact with oil and expand to seal the annulus around the pipe in both openhole and cased hole wells. It is designed to be slipped onto the completion tubular and anchored with locking gauge rings. The packer has no moving parts and is installed in a single trip; no special personnel or equipment is required. Applications range from well construction to completion. Modular assembly The modular ResPack Slip packer assembly enables operators to stock only one product for each completion size. It is available with a single element for applications requiring inflow control devices and with spaced elements for increased wellbore contact. Swelling mechanism The packer element is engineered from a complex polymer with properties similar to those of rubber; after swelling, however, the polymer s mechanical properties make it better suited for coping with high-pressure applications and sealing in flowing wells, though it remains pliant enough to control washouts and to seal in irregular wellbores. An integral delay mechanism engineered into the polymer of the oil-swellable packer minimizes the risk of premature swelling and setting without the need for any additional exterior coating. Hydrocarbon molecules diffuse into the elastomer matrix to generate volumetric expansion. ResPack Slip swellable slip-on packer. The ResPack Slip packer s modular design, which includes options for (top to bottom) single, stacked, and spaced elements, enables operators to stock only one product for each completion size. Completions 82

78 ResPack Slip Sizes and ratings ResPack Slip packers are provided in sizes ranging from 31 2 to 7 in [88.9 to mm]. They have a wide temperature range, from 100 to 365 degf [37 to 185 degc] and a differential pressure rating of up to 3,000 psi [20.7 MPa]. Swelling to first seal Swelling starts immediately after contact with oil and progresses in small increments, enabling the packer to reach the target setting depth, where it continues to swell and seal. Stringent qualifications Our packers undergo full-scale highly accelerated life cycle testing and are qualified to rigorous standards. Elastomers are tested in high concentrations of hydrogen sulfide (H 2 S), hydrochloric acid (HCl), and carbon dioxide (CO 2 ) at simulated downhole temperatures and pressures. Swell-prediction software Proprietary Schlumberger software is used to evaluate packer performance in various well environments. The software predicts the estimated swell time and pressure ratings for a certain hole ID. The results are used to select the appropriate packer and minimize risks during deployment. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

79 84

80 Thermal Packers 85

81 MH Thermal packer Thermal applications Applications with top and bottom anchoring slips that must be fully retrievable As a liner hanger, tailpipe hanger, or bridge plug (with bullnose) Combined with the MH patch bottom as a casing patch for remedial wellbore repair ADVANTAGES Thermal element rated to 650 degf [343 degc] No workstring manipulation required to set packer Standard tools/spears for retrieval Liner or tailpipe placement control anchored during thermal cycling Adjustable surface setting pressures Well tractor transition from intermediate casing, through packer, and into liner without a slave string Large beveled re-entry sleeve Large through-bore Top and bottom anchoring slips Metal-to-metal seal with static element NACE MR0175 compliant for environments containing H 2 S The MH thermal packer is a hydraulically set liner hanger packer for use in thermal applications. With a temperature rating of 650 degf [343 degc], its metal-to-metal system in conjunction with the thermal element is capable of an initial pressure test to 3,045 psi [21,000 kpa]. This packer has both hanger slips as well as top hold-down slips. The design for this product includes no elastomers. It is engineered for harsh environments that exceed the temperature and pressure limits for elastomers, such as O-rings, packing, and rubber compounds. Main features Hydraulic-set Retrievable For use in thermal applications Operation The MH thermal packer is designed to be run and set using a hydraulic setting tool engineered for producing high setting forces and handling high axial loads. Surface setting pressures are adjustable by manipulating the initial setup for the setting tool. It is conveyed with a hydraulic setting tool and set by dropping a ball or using a plug-in system, then pressuring up on the workstring. Once the thermal element is packed off, the setting tool hydraulically disconnects from the liner packer without string manipulation and is retrieved to surface. The MH thermal liner hanger packer can be retrieved if required by using standard retrieval equipment. MH Thermal Packer Specifications Size, Weight Range, lbm/ft [kg/m] Packer OD, [ ] [ ] [95.8] [ ] [ ] [117.5] [ ] [ ] [149.9] [ ] [ ] [190.5] [ ] [ ] [212.7] [ ] [ ] [263.5] MH thermal packer. Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

82 Accessories 87

83 Bottom Assemblies for QL-Series Packers Provides a fit-for-purpose bottom on packer Options for QL-series packers BENEFITS Provides a fit-for-purpose bottom on packer FEATURES Guide bottom option Threaded guide option with choice of threads Concentric coupling option to allow extension of packer bore Several optional bottom assemblies are available for Schlumberger QL-series packers. These options include a guide bottom to make up the tubing completion below the packer when no additional completion components are specified. The threaded guide provides a tubing connection box thread to connect a mill-out extension to the packer. This option comes with an API tubing connection. Bottom assemblies are also available with premium threads to match the tubing thread type above the packer. A concentric coupling is available to allow direct connection of a sealbore extension to the lower end on the QL-series packer, and the concentric coupling allows stacking of sealbore extensions. The threaded guide can be used on the bottom of the sealbore extension to cross back to tubing threads to connect the bottomhole assembly to the packer. Threaded guide. Concentric coupling. Guide bottom. Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

84 CPST Pressure Setting Tool Reliably sets bridge plugs, cement retainers, and packers on wireline Completions using wireline-set packers BENEFITS Provides long service life Requires no special alignment or orientation during assembly or disassembly Sets without overcoming well pressure FEATURES Includes gas-over-hydraulic setting operation Does not require secondary igniter Uses spiral pins to prevent tool from presetting while running in the hole Greater surface hardness and improved corrosion resistance with no surface buildup Provides efficient redressing Pressure-balanced design A Schlumberger wireline adapter kit (WLAK) is used to connect the CPST pressure setting tool to the appropriate packer, plug, or retainer. The CPST setting tool components feature a nitride surface treatment to improve service life. Nitride surface treatment combines greater surface hardness with a base metal durability and improves corrosion resistance with no surface buildup. Operation The packer adapter kit and setting tool are lowered into the well to the desired packer setting depth. An electric pulse is transmitted down the wireline string to the setting tool. This pulse ignites the power charge in the pressure setting tool. A slow-burning powder in the tool increases pressure in the setting tool to provide the force necessary to set the packer. When the maximum packer setting force is reached, a shear stud between the adapter kit and the setting tool parts to release the adapter kit from the packer. After the adapter kit has released from the packer, the setting assembly can be retrieved from the well. CPST Pressure Setting Tool Specifications OD, Max. Pressure Rating, psi [kpa] Temperature, degf [degc] Length, ft [m] Max. Setting Force, lbf [kg] [92.1] 15,000 [103,425] 400 [204] 7.5 [2.3] 83,000 [37,642] CPST pressure setting tool. Copyright 2014 Schlumberger. All rights reserved. 14-CO

85 HSP-1 Stinger Assemblies Provide a means of separating the tubing string at the packer Production wells ADVANTAGES Choice of latching type Field convertible to different versions Full tubing bore design Three release options Choice of metallurgies and elastomers The stinger is retrieved by either straight pickup or rotation with straight pickup. The seals and O-rings on the packer can be replaced, and the stinger may be reinstalled in the HSP-1 stinger s seal receptacle upon completion of a well workover. The HSP-1 is available in three configurations: snap in/rotate out, snap in/snap out, and bullnose. Snap in/rotate out The snap-in/rotate-out version is the preferred configuration to run the packer. This version eliminates the possibility of pumping the stinger off the packer when setting with hydraulic pressure. To install this stinger, set downweight on the stinger to snap the latch collet into the packer. To remove it, apply approximately 1,000 lbf [454 kg] of tension to the tubing at the packer while rotating the tubing to the right. The packer stinger will release from the packer after about four turns of the tubing. Snap in, rotate out. Snap in, snap out. Bullnose. Snap in/snap out To install the snap-in/snap-out stinger, set downweight on the stinger to snap the latch collet into the packer. To release the stinger from the packer, pick up approximately 10,000 lbf [4,535.1 kg] of tension over string weight. This tension force will snap the latch collet out of the packer. Bullnose The bullnose stinger does not utilize any latching mechanism, but it must overcome seal drag to install or remove it from the packer. Because of piston effect from tubing-to-casing pressure differential, ample tubing weight must be applied to prevent the stinger from being pumped out of the packer during injection or production procedures. HSP-1 series stingers are available for a variety of service applications, including high H 2 S and CO 2 exposure. These stingers can also be trimmed for high-pressure and high-temperature applications. HSP-1 Stinger Assembly Specifications Size, Max. OD, Min. ID, [ ] [90.5] [49.2] 5.000, [127.0, ] [108.6] [49.2] [ ] [111.1] [60.3] 6.625, 7.000, 7.625, [168.3, 177.8, 193.7, ] [136.5] [73.0] [ ] [149.4] [85.6] 7.000, 8.625, [177.8, 219.1, ] [149.4] [98.4] [ ] [207.9] [120.7] [ ] [207.9] [152.4] Other sizes are available on request. Contact your local Schlumberger representative. Copyright 2014 Schlumberger. All rights reserved. 14-CO

86 Hydraulic Setting Tool Used to set wireline packers and similar tools when wireline setting methods are not practical FEATURES AND ADVANTAGES Tubing-conveyed tool that fills and drains automatically Setting pressure that can be lowered by adding cylinders to the setting tool (three cylinders are standard) Ability to couple to adapter kits made for most pressure setting assemblies Availability of rotational release adapter kit The hydraulic setting tool (HST) is a hydraulically actuated system used to set wireline packers and similar tools when wireline setting methods are not practical or desirable. The HST features three pressure-amplified hydraulic cylinders that generate maximum setting force from a limited amount of setting pressure. The required setting pressure can be lowered further by adding cylinders to the tool. This system includes an automatic fill-and-drain feature, enhancing rig-floor safety while reducing running time. The HST is designed to couple with adapter kits made for common pressure setting assemblies, and it is available with an optional rotational release adapter kit. Setting adapter kits Setting adapter kits are used to attach the packer to an explosive-style wireline setting tool or a hydraulic setting tool. The setting adapter kit sets the packer either when it is actuated by the explosive device or by hydraulic pressure applied via a setting tool. After packer setting, the adapter kit releases from the packer for retrieval. Hydraulic adapter kit The hydraulic adapter kit is used when it is not possible to adapt between a wireline setting kit and the setting tool. The hydraulic setting kit connects the packer to the HST, and the assembly is run on a workstring. Setting the packer requires pressuring the workstring against a setting ball and seat to a predetermined pressure. After setting and testing, the setting tool assembly is released by right-hand rotation. The hydraulic setting kit contains a port, sealed during packer setting, to allow tubing to drain when retrieved. Hydraulic setting kit The HST with adapter kit is used to connect a standard wireline adapter kit to the HST, adapting the packer to run on a workstring or tubing. The HST is actuated by applying hydraulic pressure to the workstring. A setting ball is dropped and landed in the seat of the hydraulic adapter kit. Hydraulic pressure applied to the workstring sets the packer and, at a predetermined force, the tension stud parts, releasing the collet-style running nut from the packer. The setting tool, setting ball, and adapter kits are pulled from the well with the workstring. Hydraulic setting tool. Copyright 2014 Schlumberger. All rights reserved. 14-CO

87 Knockout Plug Converts the packer into a temporary bridge plug FEATURES AND ADVANTAGES Pressure balance Inexpensive alternative to purpose-built bridge plugs Knockout with tailpipe or sinker bar The knockout plug is an accessory for permanent or retrievable sealbore packers. It converts the packer into a temporary bridge plug for acidizing, fracturing, and testing above sealbore packers. The knockout plug is pushed to bottom with a sinker bar or production tube after these operations are completed. Knockout Plug Specifications Packer Bore, Tool Size [68.25] [76.20] [82.55] [101.60] [120.65] [152.40] 60 Knockout plug. Copyright 2014 Schlumberger. All rights reserved. 14-CO

88 Landing Nipple Provides a method of placing various flow control devices in the completion string FEATURES AND ADVANTAGES Bodies are manufactured from tubing of equivalent grade as the liner; L80 and Q125 material grades standard, with other material grades available by special order EU 8 round threads are standard, with other threads available by special order Fracture-hardened designs are available upon request Available in Otis MX, MXN, MOR, and MORN; and in Baker MF and MR Landing nipples are profiled subs typically run below retrievable or permanent packers that provide a method of placing various flow control devices in the completion string. Landing nipples feature an internal sealbore and profile to accept a locking device to anchor flow control accessories. Sealbores and lock profiles are machined to match a variety of connection systems and are available full-opening or slightly restricted with a no-go to provide a positive stop for a flow control device. Landing nipples are sized to match tubing sizes, while sealbore sizes are available to match a variety of weights and connection systems. Most common landing nipple profiles are currently available. Otis-Type Profile MX and MXN Specifications Tubing Size, MX Profile Sealbore, MXN Profile Sealbore, MXN Profile No-Go ID, [52.39] [41.28] [41.28] [39.01] [60.33] [47.63] [47.63] [45.49] [73.03] [58.75] [58.75] [56.01] 3.5 [88.9] [69.85] [69.85] [66.92] 3.5 [88.9] [71.45] [71.45] [67.72] All MX and MXN nipples are standard EU 8 RD. Other materials and threads are available upon request. Not applicable Baker-Type Profile MF and MR Specifications Tubing Size, MF Profile Sealbore, MR Profile Sealbore, MR Profile No-Go ID, [60.33] 1.78 [45.21] 1.78 [45.21] [43.89] [60.33] 1.81 [45.97] 1.81 [45.97] [44.7] [60.33] 1.87 [47.63] na [44.7] [73.03] 2.25 [57.15] 2.25 [57.15] [55.8] [73.03] 2.31 [58.75] na [55.8] MF landing nipple. Otis-Type Profile MOR and MORN Specifications Tubing Size, MOR Profile Sealbore, MORN Profile Sealbore, MORN Profile No-Go ID, [60.33] [45.24] [45.24] [41.66] [60.33] [43.43] [43.43] [39.62] [60.33] [38.10] [38.10] [34.16] [73.03] [55.58] [55.58] [51.05] [73.03] [53.98] [53.98] [49.20] [73.03] [50.80] [50.80] [47.78] [73.03] [47.63] [47.63] [43.58] 3.5 [88.9] [65.08] [65.08] [59.16] 3.5 [88.9] [58.75] [58.75] [54.13] 3.5 [88.9] [55.58] [55.58] [51.05] MX landing nipple. Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

89 M Fluid Control Valve Provides fluid control when acidizing low-fluid-level wells Equalizing feature that aids retrieval Tungsten carbide seat assembly Sandline retrievability The M fluid control valve is well suited for use in injection wells with low reservoir pressures where support of the fluid column in the tubing is desired. The valve is pressure actuated to provide surface control of fluids. The fluid control valve is run and set in a profile nipple, utilizing a tungsten carbide seat to eliminate washout problems. This valve is typically used with selective stimulation tools or straddle packers to provide fluid control when acidizing low-fluid-level wells. It can also be used for selective chemical treatments. M Fluid Control Valve Specifications Tubing Size, Valve OD Max., Seating Nipple ID, [60.30] 1.87 [47.60] 1.81 [46.00] [73.02] [58.20] 2.25 [57.20] M fluid control valve. Copyright 2014 Schlumberger. All rights reserved. 14-CO

90 MFL-10 and M-2 On/Off Tools Allow removal of production tubing without pulling the production packer 10,000-psi [68,947-kPa] pressure differential capability in most sizes Automatically engaged J-lock system with left-hand release (standard for the MFL-10 tool) Bonded highly saturated nitrile (HSN) seals for optimum performance and toughness J-lugs that are integral features of the stinger for maximum load capability Machination of any standard common profile into the stingers (to be specified at the time of order) Ability to be shear pinned to release either up or down The MFL-10 and M-2 on/off tools are tubing disconnect devices used to allow removal of production tubing without pulling the production packer. The MFL-10 and M-2 tools consist of an overshot with an internal seal and a seal stinger. The seal stinger features a polished seal surface and an optional blanking plug profile. The MFL-10 and M-2 tools incorporate a rugged J-lug locking system to withstand 10,000-psi [68,947-kPa] pressure differentials. The overshot includes an automatic left-hand-release J-slot and bonded HSN seals. MFL-10 and M-2 Specifications Casing Size, Skirt OD, Tubing Size 4.5 [114.30] 3.75 [95.25] EU 8 RD 5 [127.00] 3.75 [95.25] EU 8 RD 5.5 [139.70] 4.5 [114.30] EU 8 RD 7 [177.80] 5.50 [139.70] EU 8 RD 7 [177.80] 6 [152.40] 3.5 EU 8 RD [193.67] [161.92] EU 8 RD [193.67] [168.27] EU 8 RD M-2 tool. MFL-10 tool. Seal nipple. Copyright 2015 Schlumberger. All rights reserved. 14-CO

91 Millout Extensions Provide a larger ID below QUANTUM and QL series packers to protect the seals and to accept the packer retrieving sub of a milling tool Completion with permanent packer as production packer Horizontal completion with stand-alone sand screens Spacer packers Isolation packers BENEFITS Gives economical seal protection Provides larger bore to accept packer retrieving sub of milling tool FEATURES Robust and durable construction Manufactured from materials that comply with NACE MR0175 standards QUANTUM* millout extensions are used where floating seals are required in completions using QUANTUM series retrievable sealbore packers. Standard millout extensions are special tubing joints that are used with the QL series packers. Millout extensions provide a larger ID below the packer to protect the seals. The larger ID is also useful when a packer milling and retrieving tool is employed. The extension ID must be greater than the packer ID to furnish an adequate shoulder for retrieving the packer after the milling procedure is completed. Extensions are assembled onto the lower end of QL series millable sealbore packers or QUANTUM retrievable sealbore packers and run into the hole. QUANTUM millout extensions are supplied in a box-by-box configuration; standard millout extensions are supplied in pinby-pin configurations. Both are supplied in either 6- or 10-ft [1.8- or 3.0-m] lengths and are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials. Millout Extension Specifications Size, Max. OD, Min. ID, Length, ft [m] Pressure Rating, psi [kpa] [ ] [100.0] [68.3] 6.0 [1.83] 6,000 [41,370] [ ] [111.0] [76.2] 6.0 [1.83] 6,000 [41,370] 7.000, [177.8, ] [133.4] [101.6] 6.0 [1.83] 6,000 [41,370] 7.000, [177.8, ] [126.6] [115.5] 6.0 [1.83] 6,000 [41,370] [ ] [163.1] [149.9] 6.0 [1.83] 6,000 [41,370] [ ] [193.8] [168.1] 6.0 [1.83] 6,000 [41,370] Other sizes are available on request. Contact your local Schlumberger representative. Millout extensions. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

92 Model E Hydraulic Setting Tool Used to run and set packers, bridge plugs, and cement retainers on a workstring, production tubing, or coiled tubing Deviated or horizontal wells Applications where wireline setting tools are not practical BENEFITS Design allows applications for higher setting pressures Tool accepts any WLAK designed for Schlumberger CPST or Baker E-4 pressure-setting tools FEATURES Automatic fill valve Tubing drain that opens after setting packer Tandem applications possible Auto-fill and tubing-drain features able to be deactivated The Model E setting tool translates hydraulic pressure applied to the tubing to a force transmitted through the Schlumberger wireline adapter kit (WLAK) to the packer, plug, or retainer to fully set the slips and pack off the sealing element of these tools. Operation The Model E setting tool and WLAK are assembled to a packer, bridge plug, or cement retainer that is commonly set with a wireline-deployed pressure setting tool. Use of the Model E is particularly well suited for installation of packers, plugs, or retainers in highly deviated or horizontal wellbores where wireline operations are either impractical or not recommended. As the packer and setting tool assembly are lowered into the wellbore, the automatic fill feature allows the tubing to fill with well fluid as the tools are run. When the packer has reached the desired depth, pressure is applied to the tubing string. Hydraulic pressure acts on the internal piston in the setting tool, creating the push/pull action necessary to set the device as it is being installed. When the device is fully set, pressure is increased to the value of the shear stud connecting the setting tool to the WLAK. The shear stud parts and releases the WLAK from the packer, leaving the setting assembly free to be retrieved. After the Model E setting tool has sheared and released from the packer, a tubing drain system is activated. As the tubing string and setting tool are retrieved, the fluid in the tubing is discharged to avoid having to pull a wet string. Model E hydraulic setting tool. Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

93 QUANTUM Anchor Latch Assembly Provides a positive surface indication that the seal assembly is correctly positioned in the polished bore Single- or multiple-zone completions BENEFITS Design provides positive indication of proper seal location in the sealbore Simplifies operations Saves rig time Enhances reliability FEATURES Easy sting-in and release procedures Debris-tolerant standard bonded seals Prevention of seal movement Manufactured from materials that comply with NACE MR0175 standards Nitrile bonded seals Higher-performance seals available for hostile environments The QUANTUM* gravel-pack packer anchor latch assembly positions the seal units in the polished bore of the packer at the bottom of the available stroke. With a slight amount of set-down weight, the anchor latch will snap into the top thread of the packer mandrel or polished bore receptacle. This feature allows an upward pull to be applied to the tubing string to positively confirm proper location and operation. To release the anchor latch, an upward pull of 1,000 lbf [454 kg] at the latch, combined with 12 complete right-hand turns of the tubing at the latch, releases the anchor. The releasing mechanism of the anchor makes it ideal for completions where tubing movement is not desirable. Standard QUANTUM anchor latch assemblies are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials and fitted with nitrile bonded seals. Viton, Aflas, and chevron seals are available for hostile conditions, such as high-temperature, highpressure, and H 2 S environments. QUANTUM Anchor Latch Assembly Specifications Size, Max. OD, Min. ID, Pressure Rating, psi [kpa] [ ] [88.9] [49.5] 9,000 [62,055] [ ] [97.0] [59.7] 7,000 [48,265] , [177.8, ] [117.6] [61.2] 9,100 [62,745] , [177.8, ] [134.4] [77.2] 8,800 [60,676] [ ] [177.8] [83.3] 8,600 [59,297] [ ] [177.8] [123.7] 5,500 [37,923] [ ] [215.6] [153.2] 5,000 [34,475] Other sizes are available on request. Contact your local Schlumberger representative. Values shown are for 80,000-psi [551,600-kPa] material derated for 250 degf [121 degc] with a 20% safety factor. Standard Top Connection QUANTUM anchor latch assembly. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

94 QUANTUM Shear-Type Anchor Latch Provides a positive surface indication that the seal assembly is correctly positioned in the polished bore receptacle and eliminates production seal movement Single- or multiple-zone completions Intelligent completions BENEFITS Provides positive indication of proper seal location in the sealbore Simplifies operations and saves rig time Enhances reliability FEATURES Debris-tolerant standard bonded seals Seal movement prevention Easy setting and release procedures NACE MR0175-compliant materials Higher-performance seals for hostile environments Snap-in/shear-out design The QUANTUM* gravel-pack packer shear-type anchor latch is run with a production seal assembly and is connected to the packer or polished bore receptacle (PBR) in the same manner as a standard anchor latch. Once connected to the packer, this latch does not allow seal movement during normal changes in temperature and pressure. If stresses exceed a predetermined value, a shear ring parts, allowing the latch assembly to release and the seals to move. Retrieval of the shear-type anchor latch is accomplished with a straight upward pull on the tubing in excess of the release mechanism s shear ring value. The ring shears and releases the anchor s latch mechanism. This releasing mechanism is ideal for completions where tubing rotation is prohibited. The QUANTUM shear-type anchor latches are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials and are fitted with nitrile bonded seals. Viton, Aflas, and chevron seals are available on request for hostile conditions such as high-pressure, high-temperature, and H 2 S environments. QUANTUM Shear-Type Anchor Latch Specifications Size, Max. OD, Min. ID, Pressure Rating, psi [kpa] [ ] [88.9] [49.5] 9,000 [62,055] [ ] [97.0] [59.7] 7,000 [48,265] , [177.8, ] [117.6] [61.2] 9,100 [62,745] , [177.8, ] [134.4] [77.2] 8,800 [60,676] [ ] [152.4] [88.9] 8,600 [59,297] [ ] [177.8] [123.7] 5,500 [37,923] Other sizes are available on request. Contact your local Schlumberger representative. Values shown are for 80,000-psi [551,600-kPa] material derated for 250 degf [121 degc] with a 20% safety factor. Standard Top Connection QUANTUM shear-type anchor latch. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

95 QUANTUM No-Go Locator Provides a surface indication that the seal assembly is correctly positioned in the polished bore Single- or multiple-zone completions Preferred locator for long, multiple-string seal assemblies BENEFITS Simplifies operations to save rig time Design provides indication of proper seal location in the sealbore Enhances reliability FEATURES Easy sting-in and release procedures Limited seal movement Suitable for applications where the seals are allowed to float Compatible with most sealbore packers and polished bore receptacles Manufactured from materials that comply with NACE MR0175 standards High-performance seals available for more hostile environments QUANTUM* gravel-pack packer no-go locators are typically used for applications in which it is necessary to prevent downward movement only. They are used in applications that allow tubing seals to float. The no-go locator allows retrieval by simple straight pull. Standard no-go locators are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials and are fitted with nitrile bonded seals that are tolerant to debris, tubing reciprocation, and pressure unloading. Viton, Aflas, and chevron-type seals are available on special request for H 2 S and high-pressure, high-temperature applications. QUANTUM No-Go Locator Specifications Size, Max. OD, Min. ID, Pressure Rating, psi [kpa] Standard Top Connection [ ] [75.6] [49.5] 9,000 [62,055] [ ] [82.6] [59.7] 7,300 [50,334] , [177.8, ] [87.9] [60.3] 9,300 [64,124] , [177.8, ] [105.4] [77.0] 9,100 [62,745] [ ] [125.5] [83.3] 8,600 [59,297] [ ] [157.5] [120.4] 7,800 [53,781] Other sizes are available on request. Contact your local Schlumberger representative. QUANTUM no-go locator. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2013 Schlumberger. All rights reserved. 14-CO

96 QUANTUM Snap Latch Assembly Provides a surface indication that the seal assembly is correctly positioned in the polished bore Single- or multiple-zone completions Preferred locator for long, multiple-string seal assemblies BENEFITS Simplifies operations to save rig time Provides indication of proper seal location in the sealbore Enhances reliability FEATURES Easy sting-in and release procedures Limited seal movement Suitable for applications where the seals are allowed to float Compatible with most sealbore packers and polished bore receptacles Manufactured from materials that comply with NACE MR0175 standards High-performance seals available for more hostile environments The QUANTUM* gravel-pack packer snap latch assembly s no-go positions the seal units in the polished bore of the packer at the bottom of the available stroke. The latch snaps into the top thread of the packer mandrel with a slight amount of set-down weight. This feature allows a slight upward pull to be applied to the tubing string to positively confirm seal location. By pulling 5,000 lbf [2,267.5 kg] over string weight, a positive indication of proper seal location in the sealbore is provided. Additional overpull of 15,000 lbf [6,802.5 kg] snaps the snap latch out of the packer top thread. Standard snap latch assemblies are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials and fitted with nitrile bonded seals. Viton, Aflas, and chevron seals are available on request for hostile conditions such as highpressure, high-temperature, and H 2 S environments. QUANTUM Snap Latch Assembly Specifications Size, Max. OD, Min. ID, Pressure Rating, psi [kpa] [ ] [88.9] [49.5] 9,000 [62,055] [ ] [97.0] [59.7] 7,300 [50,334] , [177.8, ] [121.2] [59.7] 9,700 [66,882] , [177.8, ] [134.6] [77.0] 8,400 [57,918] [ ] [177.8] [83.3] 8,800 [60,676] [ ] [177.8] [121.4] 6,300 [43,439] [ ] [215.6] [153.2] 6,000 [41,370] Other sizes are available on request. Contact your local Schlumberger representative. Values shown are for 80,000-psi [551,600-kPa] material derated for 250 degf [121 degc] with a 20% safety factor. Standard Top Connection QUANTUM snap latch assembly. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

97 QUANTUM One-Trip Seal Latch Allows production seals to be latched into the packer and floating seals to be landed in an appropriate sealbore Completions in which extreme tubing movement is anticipated Sand-control completions with production packer above gravel-pack packer and lightweight packer fluid BENEFITS Enhances wellbore reliability and safety Requires fewer tubing trips Streamlines completion operations Reduces rig time FEATURES Protected seals Adjustable shear value Compatible with all Schlumberger sand-control packers Compatible with the shearable-type anchor latch locator Manufactured from materials that comply with NACE MR0175 standards The QUANTUM* gravel-pack packer one-trip seal latch (OTSL) is recom mended for applications where extreme dyna mic seal movement is anticipated. It is assembled and run on the production tubing in completions where the production packer is already installed downhole. The length of the sealbore or polished bore receptacle (PBR) is selected so that seals never leave the sealing bore. Standard PBR lengths are 10, 15, and 20 ft [3.0, 4.6, and 6.1 m], but most special lengths can be supplied. Seals are spaced out in accordance with tubing movement design criteria. During the running procedure, the OTSL attaches the seal assembly to the sealbore unit with a special running collet. After the PBR is anchored in the packer, the running collet is pulled upward, and the seal assembly is spaced out to the proper location. This activity is performed when running the production tubing. No further trips in the well are required. The OTSL does not trap atmospheric pressure while running in the well. The complete OTSL system is made up of a snap latch, a self-aligning guide shoe, a seal assembly, a sealbore assembly, and the OTSL lift coupling. QUANTUM one-trip seal latches are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials. QUANTUM One-Trip Seal Latch Specifications Size, Max. OD, Min. ID, Pressure Rating, psi [kpa] [ ] [100.3] [49.5] 8,000 [55,160] [ ] [111.3] [59.7] 7,000 [48,265] 7.000, [177.8, ] [133.6] [61.2] 9,000 [62,055] 7.000, [177.8, ] [133.6] [61.2] 9,000 [62,055] 7.000, [177.8, ] [144.3] [77.2] 9,000 [62,055] 7.000, [177.8, ] [144.3] [77.2] 9,000 [62,055] [ ] [178.1] [88.9] 8,800 [60,674] EUE 8RD threads are standard configuration. Premium threads are available on request. Other sizes are available on request. Contact your local Schlumberger representative. The PBR contains the pressure below the OTSL. QUANTUM one-trip seal latch. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

98 QUANTUM BA Packer Plug Converts the QUANTUM packer to a temporary bridge plug Standard completion operations BENEFITS Enhances wellbore reliability and safety Protects packer bore from shock during perforating FEATURES Built-in equalizing feature to enhance retrieval reliability and safety Backup and right-hand rotation-releasing mechanism The QUANTUM* gravel-pack packer BA packer plug permits operations above the packer, such as pressure testing, perforating, or perforations washing, without affecting the zone below the packer. It also prevents debris from settling to the lower zone. The plug is available for all QUANTUM packer sizes. The BA plug is run in the well with the QUANTUM BA plug running and pulling tool. It is latched into the packer top threads with light (3,000- to 5,000-lbm [1,361- to 2,268-kg]) setdown weight. To retrieve the plug, the running and pulling tool is run in to tag the BA plug with 5,000- to 10,000-lbm [2,268- to 4,535-kg]. Apply ing 12,000- to 15,000-lbf [5,442- to 6,803-kg] overpull with right-hand torque releases the plug. The built-in equalizing feature prevents hydrostatic or differential locking of the packer plug. QUANTUM BA Packer Plug Specifications Packer Bore Size, Plug Max. OD, [68.32] [88.95] [76.25] [95.25] [82.6] [120.7] [101.6] [133.4] [120.7] [152.4] [152.4] [180.8] QUANTUM BA packer plug. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

99 QUANTUM BA Packer Plug-Pulling Tool Retrieves the QUANTUM BA packer plug when used in the QUANTUM line of sealbore packers Standard completions Multiple-zone completions BENEFITS Available for all QUANTUM* gravel-pack packer sizes Enhanced retrievability FEATURES Circulation and washing capabilities while retrieving the BA packer plug Built-in milling shoe Ability to rotate to release the BA plug from the packer, if required The QUANTUM BA packer plug-pulling tool features actuating fingers in the tool to operate the equalizing feature of the BA packer plug during both setting and retrieval. Available for all QUANTUM packer sizes, the tool features circulation and washing capabilities while it is retrieving BA packer plug and a built-in milling shoe to enhance retrieval reliability and safety. It can be rotated to release the BA packer plug, if required. The QUANTUM BA plug pulling tool releases and retrieves the plug by tagging the BA plug with 5,000- to 10,000-lbm [2,268- to 4,535-kg]. Overpull of 12,000- to 15,000-lbf [5,442- to 6,803-kg] with right-hand torque can release the plug from the packer. QUANTUM BA packer plug-pulling tool. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

100 QUANTUM Short-Catch Packer Plug with Mandrel Saver Converts the QUANTUM packer to a temporary bridge plug Multiple-zone completions Standard and ultrahigh-density perforating and frac-pack completions BENEFITS Streamlines multiple-zone completion operations Protects the packer bore from shock during perforating Enhances retrieval reliability and safety Enhances wellbore productivity by minimizing potentially damaging fluid loss to the formation FEATURES Operational versatility Built-in equalizing feature Right-hand rotation backup releasing mechanism The QUANTUM* gravel-pack packer short-catch packer plug with mandrel saver permits the performance of operations above the packer, such as pressure testing, perforating, or washing perforations, without affecting the zone below the packer. It also prevents debris from settling to the lower zone. It is designed for use in severe applications such as ultrahigh-density perforating and frac pack operations. The plug protects the packer sealbore and accommodates shorter zone spacing with its short-catch fishing neck. It also has a built-in equalizing feature to enhance retrieval reliability and safety. The short-catch plug is run in the wellbore and latched into the packer top threads with light (3,000- to 5,000-lbm [1,361- to 2,268-kg]) set-down weight. To retrieve the plug, a short-catch packer plug retrieving tool is run in to tag the plug with 5,000- to 10,000-lbm [2,268- to 4,535-kg] setdown. Applying 12,000- to 15,000-lbf [5,442- to 6,803-kg] overpull releases the plug. If required, the plug features a right-hand rotation release backup mechanism. The built-in equalizing feature prevents hydrostatic or differential locking of the packer plug. QUANTUM Short-Catch Packer Plug with Mandrel Saver Specifications Packer Bore Size, Plug Max. OD, [68.32] [88.95] [76.25] [95.31] [82.6] [120.7] [101.6] [133.4] [120.7] [152.4] [ ] [209.0] Other sizes are available on request. Contact your local Schlumberger representative. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO-0212 QUANTUM short-catch packer plug with mandrel saver. 105

101 QUANTUM Short-Catch Packer Plug Running and Pulling Tool Sets and retrieves the QUANTUM short-catch packer plug when used with QUANTUM sealbore packers Standard and ultrahigh frac-pack completions Multiple-zone completions BENEFITS Enhances retrieval reliability and safety FEATURES Available for all QUANTUM* gravel-pack packer sizes Circulation and washing capabilities while retrieving the packer plug Built-in milling shoe Ability to rotate to release the plug from the packer if required Actuating fingers in the tool operate the equalizing feature of the packer plug during retrieval. Available for all QUANTUM sealbore packer sizes, the tool features circulation and washing capabilities while it is retrieving the short-catch packer plug and a built-in milling shoe to enhance retrieval reliability and safety. It can be rotated to release the packer plug, if required. The QUANTUM short-catch running and pulling tool runs the plug into the well and latches the packer top threads with light (3,000- to 5,000-lbm [1,361- to 2,268-kg]) setdown weight. The running and pulling tool retrieves the plug by tagging the short-catch packer plug with 5,000- to 10,000-lbm [2,268- to 4,535-kg] setdown, and it releases the plug by applying 12,000- to 15,000-lbf [5,442- to 6,803-kg] overpull. Right-hand torque can be also be used to release the plug from the packer. QUANTUM short-catch packer plug running and pulling tool. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

102 QUANTUM Lower-Zone Multiseal Assembly Part of a seal system designed to be used in multiple-zone wells Multiple-zone completions BENEFITS Protects gravel-pack assembly Creates highly effective dual-zone completions FEATURES Cover for port closure sleeve on gravel-pack extension Polished bore for selective dual completions or long strings NACE MR0175-compliant materials The QUANTUM* gravel-pack packer lower-zone multiseal assembly (LZMSA) seals in the packer bore and isolates the gravel-pack ports of the lower QUANTUM packer in a multiple-zone gravel-pack well. When used in selective strings or in dual completions, a portion of the bore of the multiseal assembly is polished to receive the long-string seal assembly. The LZMSA components are individually selected to meet specific application requirements. Depending on the completion, different snap latches, locators, and guide shoes are combined with the seal assembly. The LZMSA is run at the bottom of the upper gravel-pack packer assembly. The LZMSA components are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials. QUANTUM Lower-Zone Multiseal Assembly Specifications Size, Max. OD, Min. ID, Pressure Rating, psi [kpa] Lower Threads, in TPI [ ] [75.8] [68.3] 8,000 [55,160] SA 7.000, [177.8, ] [81.5] [68.3] 9,000 [62,055] SA 7.000, [177.8, ] [100.6] [76.2] 9,100 [62,745] SA 7.000, [177.8, ] [100.6] [82.6] 8,000 [55,160] SA [ ] [119.6] [82.6] 8,600 [59,297] UNS [ ] [151.4] [101.6] 7,800 [53,781] SA [ ] [151.4] [120.7] 7,800 [53,781] SA Other sizes are available on request. Contact your local Schlumberger representative. Values shown are for 80,000-psi [551,600-kPa] material derated for 250 degf [121 degc] with a 20% safety factor. QUANTUM lower-zone multiseal assembly. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

103 QUANTUM Long-String Seal Assembly Part of a seal system designed to be used on multiple-zone wells Multiple-zone completions Intelligent completions BENEFITS Design provides an effective, leakproof seal between packers and production tubing Integral polished bore provides reliable operation Design provides optimal space out of seals in polished bores FEATURES Debris- and movement-tolerant seals Polished bore for use in selective zones or for long strings in dual completions NACE MR0175-compliant materials If the upper zone is to be a selective zone, a QUANTUM* gravel-pack packer longstring seal assembly (LSSA) (and tubing with appropriate internal profile nipples), flow couplings, blast joints, and a sliding sleeve are assembled below the upper packer. The string is spaced out, so when the seals in the upper packer are landed, the LSSA is sealed in the bore of the lower-zone multiseal assembly (LZMSA) in the lower packer. In a dual completion, the long string is assembled with an LSSA on the bottom to seal in the LZMSA inside the lower packer. The LSSA assembly consists of a locator, usually a series of seal units, and a guide shoe. The LSSA components are individually selected to meet specific application requirements. LSSA assemblies are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials. QUANTUM Long-String Seal Assembly Specifications Size, Max. OD, Min. ID, Pressure Rating, psi [kpa] Lower Threads, in TPI [ ] [68.0] [49.7] 9,000 [62,055] SA 7.000, [177.8, ] [68.0] [49.7] 9,000 [62,055] SA 7.000, [177.8, ] [75.8] [59.4] 7,000 [62,055] UNS 7.000, [177.8, ] [81.5] [60.3] 9,300 [64,124] SA [ ] [81.5] [60.3] 9,300 [64,124] SA [ ] [100.6] [77.0] 9,100 [62,745] SA [ ] [119.6] [88.7] 8,000 [55,160] UNS Other sizes are available on request. Contact your local Schlumberger representative. Values shown are for 80,000-psi [551,600-kPa] material derated for 250 degf [121 degc] with a 20% safety factor. QUANTUM long-string seal assembly. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

104 QUANTUM Premium Seal Units Used in high-pressure, high-temperature environments where tubing metal-to-metal seal connections are required Completion seals between packers, packer and tubing, polished bore receptacle, and tubing BENEFITS Increased reliability with debris- and movement-tolerant seals Reliable seal between packers and production tubing FEATURES Seal units are designed to accept either bonded- or chevron-type seal systems Special seal units for anchors and locators optimize seal placement in polished bores This line of production seal sets is designed to be compatible with all existing QUANTUM* gravelpack packer equipment. Schlumberger premium seals are made from high-performance elastomers and are selected to match the well environments to which they are exposed. In addition, premium seal sets exhibit higher mechanical properties. Premium and standard seals units are also differentiated by their thread connections. Standard seal units have stub acme threads (O-ring seal), while premium seal units have SEAL LOCK HT connections (metal-to-metal seal). QUANTUM Premium Seal Units Specifications Size, OD, ID, Pressure Rating, psi [kpa] [68.3] [68.0] [49.7] 10,000 [68,950] [76.2] [75.8] [59.4] 10,000 [68,950] [82.6] [81.5] [60.3] 10,000 [68,950] [101.6] [100.6] [77.0] 10,000 [68,950] [120.7] [119.6] [88.7] 10,000 [68,950] [152.4] [151.4] [120.4] 10,000 [68,950] Other sizes are available on request. Contact your local Schlumberger representative. QUANTUM premium seal units. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

105 QUANTUM Guide Shoe Used to ensure proper seal assembly entry into a production packer or polished bore receptacle (PBR) Standard completion operations BENEFITS Increases reliability for guiding seal assembly into sealbore Adapts to all Schlumberger seal assemblies Easily passes through packer bores or PBRs to streamline completion operations Serves as a wireline re-entry guide FEATURES NACE MR0175-compliant materials Guide shoes are also designed to assist as a wireline re-entry guide as tools are run in and out of the assembly. Guide shoes should be used in any application where it is necessary to sting an assembly in or through another assembly. Guide shoes should not be used on applications were tubing rotation is difficult or prohibited. QUANTUM* gravel-pack packer guide shoes are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials. Quantum Guide Shoe Specifications Size, OD, ID, [68.3] [67.8] [49.0] [76.2] [75.2] [50.8] [82.6] [81.5] [60.2] [101.6] [82.0] [77.0] [120.7] [119.6] [81.3] [152.4] [151.6] [120.4] Other sizes are available on request. Contact your local Schlumberger representative. QUANTUM Guide Shoe. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

106 QUANTUM Self-Aligning Guide Shoe Used to ensure proper seal assembly entry into a production packer or a polished bore receptacle (PBR) Standard completion operations Intelligent completions Highly deviated or horizontal applications BENEFITS Increases reliability for guiding seal assembly into sealbore FEATURES Adapts to all Schlumberger seal assemblies Easily passes through packer bores or PBRs to streamline completion operations NACE MR0175-compliant materials QUANTUM* gravel-pack packer self-aligning guide shoes require no rotation, so they are especially effective in highly deviated or horizontal applications and smart wells where tubing rotation is to be avoided. The guide shoes can also be used in any application where it is necessary to sting one assembly in, or through, another assembly. QUANTUM* packer guide shoes are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials. QUANTUM Self-Aligning Guide Shoe Specifications Size, OD, ID, [68.3] [67.3] [48.5] [76.2] [74.9] [53.3] [82.6] [81.3] [60.2] [101.6] [100.6] [76.5] [120.7] [120.4] [83.1] [152.4] [151.1] [124.2] Other sizes are available on request. Contact your local Schlumberger representative. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO-0224 QUANTUM self-aligning guide shoe. 111

107 QUANTUM Sealbore Extension Used in completions where a sealbore packer is used as a production packer and tubing movement is expected Completions where tubing movement is expected BENEFITS Installs quickly and easily Provides low-cost solution Facilitates tubing replacement FEATURES NACE MR0175-compliant materials The sealbore extension provides sufficient sealbore length so that long seal assemblies may be used to accommodate tubing movement while always remaining in the sealbore. Multiple sealbore extensions can be coupled together using a concentric coupling to obtain more sealbore length. Sealbore extensions are available for all sizes of QUANTUM* gravel-pack packers. Sealbore extensions are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials. QUANTUM Sealbore Extension Specifications Size, Max. OD, Min. ID, Length, ft [m] Pressure Rating, psi [kpa] [68.3] [100.0] [68.3] 10.0 [3.05] 6,000 [41,370] [76.2] [111.0] [76.2] 10.0 [3.05] 6,000 [41,370] [82.6] [127.0] [82.6] 10.0 [3.05] 6,000 [41,370] [101.6] [127.0] [101.6] 10.0 [3.05] 6,000 [41,370] [120.7] [146.0] [120.7] 10.0 [3.05] 6,000 [41,370] [152.4] [177.8] [152.4] 10.0 [3.05] 6,000 [41,370] Other sizes are available on request. Contact your local Schlumberger representative. QUANTUM sealbore extension. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

108 QUANTUM Retrieving Tool Retrieves the QUANTUM packer and assembly in one trip without rotation Standard completion operations BENEFITS Retrieves the packer and assembly in one trip without rotation Enhances wellbore safety and reliability FEATURES Built-in mechanical jar to assist packer retrieval Right-hand rotation-release backup mechanism The rugged QUANTUM* gravel-pack packer retrieving tool includes a builtin mech anical jar to assist in packer retrieval. If the packer fails to release, the jar is actuated at 35,000- to 40,000-lbf [15,873- to 18,141-kg] overpull. The tool features a right-hand rotation-release backup mechanism and is available for all QUANTUM packer sizes. QUANTUM Retrieving Tool Specifications Bore Size, Overpull Operating Limit, lbf [kg] [68.3] 79,000 [35,827] [76.2] 95,000 [43,084] and [101.6 and 120.7]) 190,000 [86,168] [152.4] 250,000 [113,379] Other sizes are available on request. Contact your local Schlumberger representative. QUANTUM retrieving tool. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

109 QUANTUM Packer Type II Setting Tool Sets QUANTUM series retrievable and permanent packers in common completion applications Sealbore production packers Isolation/spacer packers Sump packer hydraulic setting BENEFITS Increases simplicity, safety, and reliability of completion and workover activities Reduces rig time when running packers FEATURES Full compatibility with pressureoperated isolation tool and nonpressure sensitive modules streamlines completion operations. Protects completion equipment from packer-setting pressure surges The QUANTUM* gravel-pack packer type II setting tool s design allows the workstring to fill while running in the well and protects equipment below the packer from pressure surges. The type II setting tool has the flexibility to fully test the set packer and to drain the workstring during retrieval. This setting tool allows QUANTUM sealbore packers to be used in applications other than sand control. These applications include use as production, spacer, isolation, or sump packers. The type II setting tool is compatible with hydraulic pressure-sensitive completion accessories, such as firing heads or flapper valves, and is suitable for use in situations where a closed system exists below the packer. It is available for bore sizes of 3.250, 4.000, 4.750, and in [82.5, 101.6, 120.6, and mm]. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO-0234 QUANTUM packer type II setting tool. 114

110 QUANTUM Packer Type III Setting Tool Sets QUANTUM series retrievable and permanent sealbore packers Sealbore production packer Isolation/spacer packer Horizontal stand-alone screen completions Sump packer hydraulic setting BENEFITS Increases simplicity, safety, and reliability of completion and workover activities Reduces rig time when running packers The QUANTUM* gravel-pack packer type III setting tool s design allows the workstring to fill while running in the well. It also has the flexibility to fully test the set packer and to drain the workstring during retrieval. The setting tool allows QUANTUM sealbore packers to be used in applications other than sand control. These applications include use as production, spacer, isolation, or sump packers. The type III setting tool is suitable for use with closed systems below the packer without becoming hydraulically locked. It is available for bore sizes of 2.688, 3.000, 3.250, 4.000, 4.750, and in [68.3, 76.2, 82.6, 101.6, 120.7, and mm]. FEATURES No setting ball necessary in a closed system Fully compatible with the pressureoperated isolation tool and non-pressure sensitive modules for streamlined completion operations QUANTUM packer type III setting tool. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

111 QUANTUM Releasing Tool Allows simple, straight pickup release of the packer Releasing QUANTUM* gravel-pack packers ADVANTAGES Runs on slickline or coiled tubing Uses standard sliding sleeve locator keys Features emergency shear release The QUANTUM releasing tool is used to shift a sleeve in the QMP series, XMP, and XHP packers to allow simple, straight pickup release of the packer. It is deployed by slickline or coiled tubing. Operation The releasing tool is lowered into the wellbore using standard slickline or coiled tubing procedures. When the releasing tool reaches the selective nipple profile in the bottom of the packer, downward jarring is applied to expose and engage the retrieving collet. Upward jarring pulls the retrieving collet into the support sleeve and moves the support collet upward to release the packer. When the packer is released, upward jarring disengages the releasing tool and allows it to be removed from the wellbore. When the releasing tool has been removed from the well, the packer can be retrieved with straight upward pull on the tubing. A A Section A-A QUANTUM releasing tool. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

112 QUANTUM Long-Stroke Safety Shear Sub Used in sand-control, production, and ESP completions Sand control completions Production completions Stacked single-packer completions Dual or stacked dual completions ESP completions BENEFITS Simple design facilitates efficient workover operations Fishing neck has sufficient length for overshot FEATURES Field-adjustable shear values Rotationally locked Sizes range from 5-in to in casing The QUANTUM* gravel-pack packer long-stroke safety shear sub consists of an overshot connected to a slick joint with shear pins. In the event the completion assembly must be retrieved and the packer or seal assembly does not release, the safety shear sub provides a weak point in the tubing string. By parting at the shear pins, the completion assembly above the shear joint can be retrieved and a workstring with drilling jars can be used to release and retrieve the packer or seal assembly. The sub is normally placed several joints above the packer or between stacked packers in a multizone installation. This allows independent removal of the packer assemblies. Once pulled apart, a slick sub with a known internal and external diameter extends upward for a tubing spear or overshot connection. The length of the slick sub is sufficient to allow overshot engagement. The QUANTUM safety shear sub is rotationally locked, and the shear-out force can be varied up to 90,000 lbf [40,815 kg] using standard brass screws. It easily converts to a connector sub for horizontal makeup by replacing the brass shear screws with hardened-steel screws. The QUANTUM long-stroke safety shear sub is manufactured from standard AISI 4140 low-alloy steel or premium materials for severe service environments. QUANTUM Long-Stroke Safety Shear Sub Specifications Casing Size, Max. OD, Min. ID, Burst, psi [kpa] Collapse, psi [kpa] [127.0] [93.0] [49.8] 13,700 [94,462] 14,000 [96,530] [127.0] [93.0] [60.2] 10,000 [68,950] 11,300 [77,914] [139.7] [106.2] [50.5] 13,700 [94,462] 14,000 [96,530] [139.7] [106.2] [61.2] 10,000 [68,950] 11,300 [77,914] 6.625, 7.000, and [168.3, 177.8, and 193.7] [127.0] [88.9] 11,000 [75,845] 11,500 [79,293] and [177.8 and 193.7] [136.4] [101.6] 11,000 [75,845] 11,500 [79,293] and [187.7] [127.0] 9,400 [64,813] 10,000 [68,950] [244.3 and 273.1] [203.2] [158.8] 6,500 [44,616] 7,500 [51,713] Other sizes are available on request. Contact your local Schlumberger representative. Pressure rating varies with thread type and end connection. Values shown are for 80,000-psi [551,600-kPa] material at 250 degf [121degC] with a 20% safety factor. QUANTUM safety shear sub. *Mark of Schlumberger Copyright 2014 Schlumberger. All rights reserved. 14-CO

113 QUANTUM Standard Seal Units Used as part of a QUANTUM seal assembly APPLICATION Completion seals between packer and tubing BENEFITS Increased reliability Improved sealing between packers and tubing FEATURES Seals are debris- and movement-tolerant Bonded seals can be unloaded under differential pressure Seal units used with anchors and locators optimize seal placement in polished bores Materials comply with NACE MR0175 standards Higher-performance seals are available for H 2 S service As part of the assembly for QUANTUM* gravel-pack packers, QUANTUM standard seal units consist of an anchor latch, snap latch or no-go locator, seal units, and a guide shoe. They provide an efficient leak-proof seal between the packer and the production tubing. Standard seal units contain two bonded seals and a seal spacer. Seal types The bonded seal is tolerant to damage from debris, tubing movement, and unloading of seals under pressure. Standard seal material is nitrile, which is recommended for non-h 2 S environments. For H 2 S environments, Viton seals can be specified. Aflas and chevron-type sealing systems are also available. Available seal units These seal units are available for the QUANTUM packer longstring seal assembly, lower-zone multiseal assembly, and the standard production seal assembly. Special seal units are provided with locators and anchors to ensure proper seal placement in the polished bore of the QUANTUM packer. Seal materials Seal units are made from alloy steel, are heat treated for H 2 S service, and are manufactured from materials that comply with NACE MR0175 standards for sulfide stress cracking-resistant metallic materials. QUANTUM Standard Seal Units Specifications Size, OD, ID, Pressure Rating, psi [kpa] [68.3] [68.0] [49.7] 9,000 [62,055] [76.2] [75.8] [59.4] 10,000 [68,950] [82.6] [81.5] [60.3] 9,300 [64,124] [101.6] [100.6] [77.0] 9,100 [62,745] [120.7] [119.6] [88.7] 8,600 [59,297] [152.4] [151.4] [120.4] 7,800 [53,781] Other sizes are available on request. Contact your local Schlumberger representative. Values shown are for 80,000-psi [551,600-kPa] material derated for 250 degf [121 degc] with a 20% safety factor. QUANTUM standard seal units. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2015 Schlumberger. All rights reserved. 15-CO

114 QUANTUM Wireline Adapter Kit Enables QUANTUM series retrievable sealbore packers and QL series permanent packers to be set by wireline Cased hole Deviations to 65 Wireline-set packers BENEFITS Substantial rig time savings over hydraulically setting packer Long field life FEATURES Mates to size 10 or 20 Model E-4 wireline pressure setting assembly Mates to Schlumberger CPST wireline pressure-setting tool Mates to hydraulic-setting tool Rugged design The QUANTUM* gravel-pack packer wireline adapter kit enables both the QUANTUM series retrievable sealbore packers and the QL series permanent packers to be set by wireline on a Schlumberger CPST pressure setting tool or Baker Type E-4 pressure setting tool, or to be mated to the Schlumberger Model E hydraulic setting tool. In its most common use with a wireline setting tool, the system allows for a substantial reduction in rig time over setting on tubing with a hydraulic setting tool. This kit can be run with a fast- or slow-burning power charge and a 35,000-lbf or 55,000-lbf [15,873-kg or 24,943-kg] Baker-type shear stud or a Schlumberger CPST setting tool which has a maximum shear force of 83,000 lbf [37,642 kg]. The system is adaptable to many packer configurations. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO-0232 QUANTUM wireline adapter kit. 119

115 Sealing Systems Wide variety of elastomeric, plastic, and metallic material choices Production wells Injection wells Sand-control completions BENEFITS Suited for most environments Seal types suited for static or dynamic applications FEATURES Wide range of materials Bonded and chevron-type seal systems Our many readily available combinations of seal types and materials allow us to quickly fulfill requirements for most downhole environments with reliable, field-proven systems. These high-quality sealing systems provide an efficient leak-proof seal between the packer and the production tubing. Our standard systems consist of bonded-type seals featuring a nitrile seal element. Our bonded seals for harsh environments are available with Viton and Aflas seal elements, which are standard on our premium seal units. Bonded seals are tolerant to damage from debris, tubing movement, and unloading of the seals under pressure. Chevron-type seal systems are available with Viton, Teflon, Ryton, and Aflas seal elements. These sealing system configurations are generally used on our premium seal units. Schlumberger sealing systems are available for temperature ranges from 75 degf to 350 degf [24 degc to 177 degc]. Pressure ratings to 10,000 psi [68,950 kpa] are available. Bonded-type seal. Chevron-type seal. Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-CO

116 Sliding Sleeve Establishes communication between the tubing and the casing FEATURES AND ADVANTAGES Availability for elastomeric or nonelastomeric seals Collet lock on closing sleeve Ability to be opened and closed repeatedly Selective open/close through use of various profile sizes The sliding sleeve is a tubing-run, mechanically shifted sleeve used in production tubing to establish communication between the tubing and the casing. The sleeve facilitates production of several zones through one tubing string and allows zone-specific tasks to be performed, including testing and stimulation. The sliding sleeve opens and closes using conventional wireline shifting equipment. Hydro-trip pressure sub The Hydro-trip pressure sub provides a means to set hydraulically actuated tools by applying the tubing pressure required for activation. Setting is achieved by circulating a ball to a seat in the sub and applying sufficient pressure to activate the setting mechanism in the tool below. Further pressure is applied to the ball, shearing brass screws and sending the ball down the tubing. Following setting, the sub provides an open bore for passage of drop balls or wireline equipment. Wireline re-entry guide pumpout plug and ball seat The wireline re-entry guide ensures that wireline tools can be pulled back into the tubing string once they have passed through the bottom of the string. The pumpout plug temporarily seals the bottom of the tubing string to prevent fluid from moving up the tubing while tripping in the hole. The pumpout ball seat can be used as a bridging device to set a hydraulic packer or to hydraulically test the tubing string; the ball seat allows the tubing to fill with fluid while running in the hole. Hydro-trip sub. Plug insert. Circulating ball seat. Sliding sleeve. Re-entry guide. Copyright 2014 Schlumberger. All rights reserved. 14-CO

117 Tubing Tension Safety Joint Permits torque-through capability and requires straight upward pull to release Single and dual completions ADVANTAGES Field adjustable Wide variety of shear values Integral high strength splines Adjustable shear Robust construction Availability in variety of materials and elastomers Tubing tension safety joints are straight pickup, shear-release tools commonly used in applications where rotation of the tubing is impractical. This type of safety joint provides a means of separating the production tubing above or below a packer if necessary. This is a fully locked safety joint that allows full tubing torque to be applied through the joint without loading the shear screws. Description The tension-type safety joint is connected with a set of shear screws, which are easily added or removed in the field to adjust the shear value to match completion requirements. The release value can be adjusted by varying the number of shear screws used. The sub will not shear when weight is set on it, and it will transmit torque through an integral spline section. Tubing Tension Safety Joint Specifications Size, Max. OD, Min. ID, Shear Force per Screw Brass, lbf [kg] Steel, lbf [kg] [60.3] [77.8] [50.7] 2,000 [907] 5,000 [2,268] [73.0] [93.7] [62.0] 2,000 [907] 5,000 [2,268] [88.9] [114.3] [76.0] 2,000 [907] 5,000 [2,268] [114.3] [141.3] [100.5] 2,000 [907] 5,000 [2,268] [139.7] [153.7] [124.3] 2,000 [907] 5,000 [2,268] [177.8] [195.2] [161.7] 2,000 [907] 5,000 [2,268] Other sizes are available on request. Contact your local Schlumberger representative. Tubing tension safety joint. Copyright 2014 Schlumberger. All rights reserved. 14-CO

118 Type A Rotation-Release Safety Joint Provides tensile strength equal to the tubing and requires a right-hand rotation to release Single and dual completions BENEFITS Carries high tension loads FEATURES Robust construction Available in variety of materials and elastomers The Type A safety joint is used in installations where free rotation of the production tubing string above the safety joint can be performed safely. It provides high breakout torque and constant releasing torque. It is also used when it is anticipated that the production tubing string may be subjected to high tensile loads, eliminating the possible use of straight-pull-release safety joints. Type A Rotation-Release Safety Joint Specifications Size, Max. OD, Min. ID, [60.3] [77.8] [50.7] [73.0] [93.7] [62.0] [88.9] [114.3] [76.0] [114.3] [141.3] [100.5] [139.7] [153.7] [124.3] [177.8] [195.2] [161.7] Other sizes are available on request. Contact your local Schlumberger representative. Type A rotation-release safety joint. Copyright 2014 Schlumberger. All rights reserved. 14-CO

119 Unloader Valve Fullbore circulating valve FEATURES AND ADVANTAGES ID that matches tubing to eliminate restrictions and fluid flow problems J-lug system that allows valve to be locked in open or closed position for operational versatility Inexpensive and easy redress for cost-effective operation The unloader valve is a fullbore circulating valve for use with downhole equipment that requires the ability to circulate fluids or unload pressure prior to subsequent operations. This valve is pressure balanced and designed to run either locked open or closed. Opening and/or closing operations are accomplished by a J-lug system. Unloader Valve Specifications Size OD, Max., ID, Min., Connection [98.43] [50.80] EU [120.65] [62.50] EU [120.65] [62.50] 3.5 IF [155.58] [76.20] 4.5 IF Unloader valve. Copyright 2014 Schlumberger. All rights reserved. 14-CO

120 Wireline Adapter Kit Connects the MDF and MDFBB permanent production packers to a wireline assembly Setting on electric wireline, using the combination of a power charge and a pressure setting assembly ADVANTAGES Accurate location in the well by correlating position with well logs May be set with industry standard E-line or hydraulic setting tools Simple to install with only three major parts No special tools required Able to be installed in a shorter time than with tubular conveyed methods The wireline adapter kit is used to connect the MDF and MDFBB permanent production packers and similar equipment to a wireline pressure setting assembly or a hydraulic setting tool. Actuation of the explosive applies pressure to the adapter sleeve, setting the packer. At a predetermined force, a tension stud parts, releasing the colletstyle running nut from the packer. The adapter kit is retrieved with the wireline and pressure setting assembly. Wireline adapter kit. Copyright 2014 Schlumberger. All rights reserved. 14-CO

121 Packers Catalog Schlumberger packers are installed in challenging, high-profile completion projects around the world. With our long track record of innovation, quality, reliability, flexibility, and product support, our packers will protect the integrity and longevity of your completions and support the overall success of your project. *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2015 Schlumberger. All rights reserved. 14-CO-0245

Drilling & Down-hole Completion Tools

Drilling & Down-hole Completion Tools HYDRAULIC SET PRODUCTION PACKER MODEL: WC-HP-1 & WC-HPL-1[Large Bore] PRODUCT No.: WC-20101 & WC-20112 HP-1 is an industry standard, fully hydrostatic, hydraulic set and shear release single string retrievable

More information

Completion Tools Catalog

Completion Tools Catalog Completion Tools Catalog www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. TABLE OF CONTENTS P/N Description Page P/N Description

More information

Special Features. u By-pass below upper slips to wash. debris when valve is opened. u By-pass is opened before upper slips.

Special Features. u By-pass below upper slips to wash. debris when valve is opened. u By-pass is opened before upper slips. Quality We Know Downhole. ASI-X Packer The D&L ASI-X Packer is the most versatile of the mechanically set retrievable packers and may be used in any production application. The ASI-X Packer is suited for

More information

Service Tools Catalog

Service Tools Catalog Service Tools Catalog www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. TABLE OF CONTENTS P/N Product Description Page Type P

More information

Permapak Seal Bore Packer

Permapak Seal Bore Packer Quality We Know Downhole. Permapak Seal Bore Packer The D&L Permapak Seal Bore Packer can be used for single or multiple zone completions. It is designed for wells where high pressure/temperatures and

More information

SAPEX OIL TOOLS LTD. DOWNHOLE COMPLETIONS PACKERS & COMPLETION EQUIPMENT WORKOVER & COMPLETION SERVICE TOOLS PRODUCTS, APPLICATIONS & SPECIFICATIONS

SAPEX OIL TOOLS LTD. DOWNHOLE COMPLETIONS PACKERS & COMPLETION EQUIPMENT WORKOVER & COMPLETION SERVICE TOOLS PRODUCTS, APPLICATIONS & SPECIFICATIONS PRODUCTS, APPLICATIONS & SPECIFICATIONS TOMORROW S TECHNOLOGY FOR TODAY S ENERGY WHO ARE WE? We are an independent International Oilfield Service Company, offering 24-Hour Drilling, Completion and Work-over

More information

Tryton. Tool Services. People. Products. Performance. Calgary - Sales/Marketing Office 1100, 250 2nd St. SW Calgary, AB T2P 0C1 Ph:

Tryton. Tool Services. People. Products. Performance. Calgary - Sales/Marketing Office 1100, 250 2nd St. SW Calgary, AB T2P 0C1 Ph: Tool Services Lloydminster Field Office Corporate/Accounting Office 6702-56 Street Lloydminster, AB T9V 3A7 Ph: 780 875-0800 (24hr) Brooks Field Office 329-9th St. E Brooks, AB T1R OK2 Ph: 403 362-8600

More information

Tryton. Tool Services. People. Products. Performance. Canadian Locations

Tryton. Tool Services. People. Products. Performance. Canadian Locations Tool Services Canadian Locations Lloydminster - Corporate Office 6702-56 Street Lloydminster, AB T9V 3A7 Ph: 780 875-0800 (24hr) Brooks - Field Office 329-9th St. E Brooks, AB T1R OK2 Ph: 403 362-8600

More information

Tryton. Tool Services. People. Products. Performance. Canadian Locations

Tryton. Tool Services. People. Products. Performance. Canadian Locations Tool Services Canadian Locations Lloydminster - Corporate Office 6702-56 Street Lloydminster, AB T9V 3A7 Ph: 780 875-0800 (24hr) Brooks - Field Office 329-9th St. E Brooks, AB T1R OK2 Ph: 403 362-8600

More information

T-2 On-Off Tool. Available with all common wireline profiles, the stinger works with industrystandard blanking plugs, standing valves and regulators.

T-2 On-Off Tool. Available with all common wireline profiles, the stinger works with industrystandard blanking plugs, standing valves and regulators. T-2 On-Off Tool Classic Oilfield s T-2 On-Off Tool enables the tubing string to be disconnected above a packer for zonal isolation, tubing retrieval, and temporary zone abandonment. The tool contains an

More information

MagnusSeal Retrievable Seal Bore Packer Product No.: MSP 7500

MagnusSeal Retrievable Seal Bore Packer Product No.: MSP 7500 Product No.: MSP 7500 Packer Retrieving Tool www.maximuscompletions.com is a reliable high pressure packer used for production, gravel packing, or injection applications. seal bore packer is set on wireline

More information

Dynamic MDT Service Packer V-III Un-Loader Valve ANC Storm Valve

Dynamic MDT Service Packer V-III Un-Loader Valve ANC Storm Valve Dynamic MDT Service Packer V-III Un-Loader Valve ANC Storm Valve Dynamic MDT Service Packer Dynamic MDT Retrievable Packer consists of a compression set packer with hydraulic hold down that is designed

More information

SERVICE TOOLS. Magnus MDT Service Packer V-III Un-Loader Valve MANC Storm Valve

SERVICE TOOLS. Magnus MDT Service Packer V-III Un-Loader Valve MANC Storm Valve s ervice packers Magnus MDT Service Packer V-III Un-Loader Valve MANC Storm Valve Magnus MDT Service Packer Magnus MDT Retrievable Packer consists is a compression set packer with hydraulic hold down that

More information

Cloppenburg Germany Germany Tel.: +49 (0) Hohe Tannen 14

Cloppenburg Germany Germany Tel.: +49 (0) Hohe Tannen 14 Downhole Tools Fangmann Energy Services GmbH & Co. KG Hohe Brietzer Tannen Weg 14 10 49661 29410 Cloppenburg Salzwedel Tel.: Tel.: +49 +49 (0)4471 (0)3901 98008-0 8363-0 Fax: Fax: +49 +49 (0)4471 (0)3901

More information

Subsurface Flow Controls

Subsurface Flow Controls Subsurface Flow Controls Subsurface Flow Controls Landing Nipples X, R, RPT, FBN Lock Mandrels and accessories Nippleless Tubing Plugs - Mirage plug, Monolock DuraSleeve Sliding Side-Door circulating device

More information

Downhole Tools Worldwide.

Downhole Tools Worldwide. Downhole s Worldwide. INFLATABLES PRODUCTION PACKER SEV-SET PACKER THRU TUBING PACKER CASING PACKER STRADDLE PACKER HYDRAULIC DISCONNECT ON-OFF SEAL Table of Contents 1-1 1-2 1-3 1-4 1-5 1-6 1-7 TechWest

More information

We Know Downhole. PRODUCT CATALOG

We Know Downhole. PRODUCT CATALOG PRODUCT CATALOG Our Company D&L Oil Tools designs, manufactures, and assembles downhole equipment for customers in both domestic and international markets. Headquartered in Tulsa, Oklahoma, our tradition

More information

MESQUITE OIL TOOLS, INC. PRODUCT CATALOG

MESQUITE OIL TOOLS, INC. PRODUCT CATALOG MESQUITE PRODUCT CATALOG MESQUITE Mesquite Oil Tools, Inc. 8007 West Industrial Midland, TX 79706 Mesquite Oil Tools, Inc. P.O. Box 668 Snyder, TX 79550 Jerry Pechacek CEO Justin Pechacek President Office

More information

Special Features. u Blanking plug seats in top of. u Bonded seal allows disconnects. and re-connects. u Right-hand or left-hand release

Special Features. u Blanking plug seats in top of. u Bonded seal allows disconnects. and re-connects. u Right-hand or left-hand release DT-2 On/Off Tool The D&L DT-2 On/Off Tool is a tubing seal receptacle allowing isolation of a lower zone using a wireline blanking plug. The tubing string can then be removed from the well. When re-run,

More information

TMK QUANTUM Infinity. Unlimited Stage Fracturing System COMPLETIONS

TMK QUANTUM Infinity. Unlimited Stage Fracturing System COMPLETIONS TMK QUANTUM Infinity Unlimited Stage Fracturing System COMPLETIONS TMK QUANTUM Infinity TMK QUANTUM Infinity ball-actuated sliding sleeve system utilizes a revolutionary, patent pending electronic counter

More information

Tryton People. Products. Performance.

Tryton People. Products. Performance. Lloydminster Field Office Corporate/Accounting Office 6702-56 Street Lloydminster, AB T9V 3A7 Ph: 780 875-0800 (24hr) Brooks Field Office 329-9th St. E Brooks, AB T1R OK2 Ph: 403 362-8600 (24hr) High Level

More information

Casing Scraper. Service Equipment. Features

Casing Scraper. Service Equipment. Features Casing Scraper The Casing Scraper is a spring type, mechanical casing scraper, featuring a large by-pass area between the blades to allow circulation of debris. The body is constructed of the highest quality

More information

Thru-Tubing. Motors and standard tools

Thru-Tubing. Motors and standard tools Thru-Tubing Motors and standard tools Thru-Tubing Reliable. Innovative. Premium. We are proud of our products and their contribution to the downhole drilling and thru-tubing industries. Research Innovate

More information

WLTC Retrievable Bridge Plug

WLTC Retrievable Bridge Plug service Tools WLTC Retrievable Bridge Plug The WLTC Retrievable Bridge Plug is designed to perform all tasks normally required of a tubing run packer-type bridge plug and can be quickly converted to run

More information

Product Overview Last date of Revision:

Product Overview Last date of Revision: Product Overview Last date of Revision: 07-07-2018 Gryphon Oilfield Solutions is a worldwide provider of quality, value driven, oilfield products and services. We specialize in aggressive well completions

More information

The Well Commander Mitigate drilling hazards with the industry s most versatile drilling valve. Todd Gooding Business Development Manager

The Well Commander Mitigate drilling hazards with the industry s most versatile drilling valve. Todd Gooding Business Development Manager The Well Commander Mitigate drilling hazards with the industry s most versatile drilling valve Todd Gooding Business Development Manager WELL COMMANDER A COMPLETE redesign of the ball-activated Centurion

More information

Coiled Tubing Tool EXTERNAL SLIP CONNECTOR. Feature. Specification Tool O.D. inch. Coiled Tubing O.D. inch. Tool I.D. inch. Conn.

Coiled Tubing Tool EXTERNAL SLIP CONNECTOR. Feature. Specification Tool O.D. inch. Coiled Tubing O.D. inch. Tool I.D. inch. Conn. Coiled Tubing Tool EXTERNAL SLIP CONNECTOR The External Slip Connector is designed through a unique non-rotational slip, the upper end is connected with the coiled tubing, and the lower end is connected

More information

Well Completions. Thursday, 4 July 13

Well Completions. Thursday, 4 July 13 Well Completions Well Completions Well Completions Components and Functionality Components and Functionality Components and Functionality Xmas Tree & Wellhead Open-Hole Completion Open-Hole Completion

More information

PRODUCT LINE. CPS Oil & Gas Equipments Private Limited. Liner Hanger System. Gas Lift Equipment. Cementing and Casing Accessories

PRODUCT LINE. CPS Oil & Gas Equipments Private Limited. Liner Hanger System. Gas Lift Equipment. Cementing and Casing Accessories PRODUCT LINE CPS Oil & Gas Equipments Private Limited Liner Hanger System Cementing and Casing Accessories Completion and Downhole Equipment Gas Lift Equipment COMPANY PROFILE CPS, a company based on Indian

More information

We Know Downhole. PRODUCT CATALOG

We Know Downhole. PRODUCT CATALOG We Know Downhole. PRODUCT CATALOG Our Company D&L Oil Tools designs, manufactures, and assembles downhole equipment for customers in both domestic and international markets. Headquartered in Tulsa, Oklahoma,

More information

AS-1 Retrievable Packer

AS-1 Retrievable Packer AS-1 Retrievable Packer Retrievable Packers & Accessories The AS-1 Retrievable Packer is one of the most reliable and versatile mechanically set packer. It may be used any production application and is

More information

Completion Solutions Inc.

Completion Solutions Inc. Completion Solutions Inc. Simple Designs That Simply Work! Company Introduction Dec 2012 1 Who is Completions Solutions Inc? Founded in 2012 Focused on efficient and economical well bore stimulation (both

More information

SAND CONTROL. enhanced. Save time and cost while improving reservoir producibility HALLIBURTON. Solving challenges.

SAND CONTROL. enhanced. Save time and cost while improving reservoir producibility HALLIBURTON. Solving challenges. enhanced SINGLE-Trip Multizone Solving challenges. industry. Pump-rated to 5 barrels per minute (bbls/min) and proppant-rated to 7 lbs rating of,7 lbs of /30 HSP proppant. Largest 0k (or 0,000 psi) system

More information

Delivering innovation through engineering

Delivering innovation through engineering Delivering innovation through engineering +44 1224 727480 Completions & Work-over Operations Bore Selector gives access to either the main production bore or annulus in a traditional vertical xmas tree,

More information

WELLCARE OIL TOOLS PVT LTD PACKER ACCESSORIES & TOOLS

WELLCARE OIL TOOLS PVT LTD PACKER ACCESSORIES & TOOLS PACKER ACCESSORIES & TOOLS 1 PRODUCT INDEX 1. Drag Block Tubing Anchor/Catcher 2. Setting Tool Nipple 3. Splined Expansion Joint 4. Auto Lock Expansion Joint 5. Splined Expansion Joint 6. Expansion Joint

More information

Generation IV Single- Trip Multizone FracPac System. Overview

Generation IV Single- Trip Multizone FracPac System. Overview Generation IV Single- Trip Multizone FracPac System Overview Ricki Jannise Principal Product Champion Multizone Sand Control 281 988 2282 or 713 702 6716 Ricki.jannise@halliburton.com What is it? Single-Trip

More information

Minimizing risk with innovative design. Dual ESP Systems and Accessories

Minimizing risk with innovative design. Dual ESP Systems and Accessories Minimizing risk with innovative design Dual ESP Systems and Accessories Dual ESP Systems When you need to improve the performance of your high-asset-value wells, Schlumberger dual ESP systems provide the

More information

TAM-J. Highest reliability multiple-set inflatable packer system available. Element sizes for 2-3/8 tubing through 30 casing

TAM-J. Highest reliability multiple-set inflatable packer system available. Element sizes for 2-3/8 tubing through 30 casing TAM-J Multiple Set In f l ata b l e Packer System Highest reliability multiple-set inflatable packer system available Element sizes for 2-3/8 tubing through 30 casing Easy conversion to straddle tool ISO

More information

TABLE OF CONTENT. Description

TABLE OF CONTENT. Description TABLE OF CONTENT Description Page OQLH Liner Hanger Packer Combo 1 Set Liner Packer Hydraulic or Mechanical Set 2 Quartus QLG Liner Extension Assembly 3 Quartus Liberty Liner Hangers Single & Dual Cone

More information

REDA Coil. Coiled tubing-deployed ESP system

REDA Coil. Coiled tubing-deployed ESP system REDA Coil Coiled tubing-deployed ESP system Alternative ESP Deployment Method Minimizes Costs and Deferred Production Conventional ESP systems are conveyed by production tubing and require workover rigs

More information

RODEC "C" Low Profile Rotator / RODEC "C" Integral Rotator (3 in 1)

RODEC C Low Profile Rotator / RODEC C Integral Rotator (3 in 1) We have been providing effective tubing wear solutions for over 70 years. Whether using rod pumping units or progressing cavity downhole pumps, we offer the most complete package of wear prevention solutions

More information

2013 Latin America Perforating Symposium. SLAP-23 Perforating Options Available Today in Horizontal Shale Oil and Gas Wells. Kerry Daly, Weatherford

2013 Latin America Perforating Symposium. SLAP-23 Perforating Options Available Today in Horizontal Shale Oil and Gas Wells. Kerry Daly, Weatherford 2013 Latin America Perforating Symposium Perforating Options Available Today in Horizontal Shale Oil and Gas Wells Kerry Daly, Weatherford Typical Eagle Ford Well Costs Total well cost approximately $10

More information

2 1 /8 in Neyrfor TTT. Thru Tubing Turbodrill

2 1 /8 in Neyrfor TTT. Thru Tubing Turbodrill 2 1 /8 in Neyrfor TTT Thru Tubing Turbodrill In 1956, the first Neyrfor turbodrill was developed. Today, Neyrfor turbodrilling systems have become more advanced and power-efficient than ever before. Based

More information

TCI DUAL QUARTER ANCHOR CATCHER (TDQAC)

TCI DUAL QUARTER ANCHOR CATCHER (TDQAC) TCI DUAL QUARTER ANCHOR CATCHER (TDQAC) The TQDA is a rugged anchor-catcher that operates with minimum (less than a 1/4 turn) tubing string rotation to set or release. The no torque option resists right

More information

D and DL Annular Blowout Preventers

D and DL Annular Blowout Preventers D and DL Annular Blowout Preventers In the unique design of the Cameron DL Annular BOP, closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force

More information

Casing Cementation Equipment

Casing Cementation Equipment Casing Cementation Equipment Float Equipment Cementing Plugs Casing Centralizers Stage Tools Inflatable Casing Packers Extended Reach Casing Equipment Swellable Casing Packers Liner Equipment Quality Control/Assurance

More information

GT GAS-TIGHT SERIES ELIMINATOR. Addressing your wellbore isolation and cement needs through an ISO V0-rated stage-cementing package

GT GAS-TIGHT SERIES ELIMINATOR. Addressing your wellbore isolation and cement needs through an ISO V0-rated stage-cementing package WELL CONSTRUCTION ELIMINATOR GT GAS-TIGHT SERIES Addressing your wellbore isolation and cement needs through an ISO 14998 V0-rated stage-cementing package DRILLING & FORMATION EVALUATION WELL CONSTRUCTION

More information

Technical Description and Specifications of the VibraEnforcer Systems for Freeing Stuck Pipe in Drilling Operations

Technical Description and Specifications of the VibraEnforcer Systems for Freeing Stuck Pipe in Drilling Operations Introduction Technical Description and Specifications of the VibraEnforcer Systems for Freeing Stuck Pipe in Drilling Operations Nordic Well Services and Advanced Drilling Support Services (ADSS) has identified

More information

COILED TUBING TOOLS SALE RENTAL - LEASE

COILED TUBING TOOLS SALE RENTAL - LEASE COILED TUBING TOOLS SALE RENTAL - LEASE GTECH Energy Services LLC 67 Pinepath Pl. Spring, Texas 77381 PH: 713-703-2959 Fax: 713-510-1802 sales@gtechenergyservices.com SALES@GTECHENERGYSERVICES.COM 1 PRODUCT

More information

DSI THRU-TUBING INC. Bear Claw Composite Bridge & Frac Plug Systems. Proof in Performance

DSI THRU-TUBING INC. Bear Claw Composite Bridge & Frac Plug Systems. Proof in Performance DSI THRU-TUBING INC Bear Claw Composite Bridge & Frac Plug Systems Proof in Performance Proof in Performance www.dsithrutubing.com CANADA Toll Free Dispatch 855-346-9788 3300, 205 5th Ave SW Calgary T2P

More information

Intervention Barriers

Intervention Barriers Intervention Barriers A barrier is defined as a means of containing wellbore pressure and fluids. Two effective barriers are required for most intervention operations. Consider when barriers are effective

More information

Completion Systems & Mechanical Products

Completion Systems & Mechanical Products Completion Systems & Mechanical Products ESP Dual Systems ESP Encapsulation (CAN / POD) ESP Bypass Systems performance with reliability Tubing String Products Redundancy Y-Tool - Single ESP System As the

More information

RENTAL TOOL SERVICES. Megaton Impact Tools

RENTAL TOOL SERVICES. Megaton Impact Tools Megaton Impact Tools Upper Connector Megaton Impact Tools optimize your drilling operations. Drive Mandrel Female Spline Bearing Female Spline New-Generation Drilling Tools Megaton Drilling Jar Frees the

More information

Conventional Gas Lift Mandrels

Conventional Gas Lift Mandrels Conventional Gas Lift Mandrels Gas lift mandrels installed as part of tubing strings Gas lift service Single- and dual-string installations Injection- and production-pressure operations BENEFITS Application-specific

More information

Express Series Multi Configuration Composite Body Bridge / Frac Plugs

Express Series Multi Configuration Composite Body Bridge / Frac Plugs Multi Configuration Composite Body Bridge / Frac Plugs The Express Series Bridge and Frac Plugs utilize a unique combination of composites to provide a dependable, durable, and cost-efficient method for

More information

#10 Setting Tool Assembly Product Family No (10)

#10 Setting Tool Assembly Product Family No (10) BRICO Oil Tools provides a dependable line of Wireline Pressure Setting Tools for the Wireline industry worldwide. Our engineering, high quality and service provides a cost effective alternative. BT#10

More information

RODEC TUBING ROTATOR SOLUTIONS

RODEC TUBING ROTATOR SOLUTIONS RODEC TUBING ROTATOR SOLUTIONS RODEC TUBING ROTATOR SOLUTIONS One Company, Unlimited Solutions Since 1841, National Oilwell Varco has been dedicated to ensuring customers receive the highest quality oilfield

More information

SECTION VIII: TEST TOOLS and CHECK VALVES

SECTION VIII: TEST TOOLS and CHECK VALVES INDEX of SECTION VIII: PRODUCT DESCRIPTION Code Page TEST TOOLS, VIII-0-10 ROTFB-2 12 1,2 ROTRB-2 12 3,4 ROTN 14 5,6 ROTR 14 7 ROTX 14 8 POR - PORN and POX - POXN 14 9 CVR - CVRN and CVX - CVXN Check Valve

More information

LEE NAK GUI TCP SERVICE COORDINATOR APPS

LEE NAK GUI TCP SERVICE COORDINATOR APPS Live Well Deployment System LEE NAK GUI TCP SERVICE COORDINATOR Challenges Monobore completion High angle wells Long perforation intervals Underbalanced perforating (static or dynamic) Well control barriers

More information

KUDU PCP. Positive displacement pump with a helical rotor spinning inside a fixed stator

KUDU PCP. Positive displacement pump with a helical rotor spinning inside a fixed stator Positive displacement pump with a helical rotor spinning inside a fixed stator APPLICATIONS Heavy, medium, and light oil wells Dewatering of coalbed methane and conventional gas wells High-water-cut and

More information

Health, Safety and Environment: Product Performance: Proven Quality: Presence: Client Focus: Tried and Tested:

Health, Safety and Environment: Product Performance: Proven Quality: Presence: Client Focus: Tried and Tested: Wenzel Downhole Tools is the leading motor and drilling tool supplier, with worldwide operations supporting the oilfield and construction industries. Wenzel s capability to engineer, manufacture and service

More information

Pipe Recovery Equipment

Pipe Recovery Equipment Pipe Recovery Equipment Jet Research Center offers a variety of field-proven, reliable pipe recovery equipment to satisfy the high demands in the oilfield industry. The equipment supplied by JRC undergoes

More information

MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES

MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES Prepared for the University of Texas by Pettigrew Engineering, PLLC Tom Pettigrew, PE President Revision: 5 15 October

More information

Composite Plugs. Index

Composite Plugs. Index Composite Plugs Downhole Isolation Tools - Multi-Stage Operations Index Rapid Mill Ball Drop... 1-2 Rapid Mill Flo-Back Flapper... 3-4 Series (Ball Drop, Bridge, Flo-Back, Flo-Back with Bio-Ball)... 5-6

More information

MANUFACTURING. PD Impact Tools

MANUFACTURING. PD Impact Tools PD Impact Tools Upper Connector MANUFACTURING Drive Mandrel Female Spline Bearing Female Spline PD Impact Tools optimize your drilling operations. Knocker Housing Knocker Pressure Piston Hydraulic Mandrel

More information

Tubing-Casing Technologies STX , 4.5 INCH 13.5 PPF.

Tubing-Casing Technologies STX , 4.5 INCH 13.5 PPF. STX-SPAN SYSTEM STX-4500-0135-2001 NOTED 1 LOWER COMPLETION STX-4500-0135-2100 NOTED 1 LOWER STINGER ASSEMBLY STX-4500-0135-2200 NOTED OPT. STANDARD STINGER ASSEMBLY STX-4500-0135-2600 NOTED 1 TOP STINGER

More information

C BOP. TC Cooper Cameron, Cameron Division

C BOP. TC Cooper Cameron, Cameron Division C BOP The Cameron C BOP was designed as an emergency safety head for snubbing coiled tubing workover applications. The main function of the C BOP is to shear whatever is in the hole - from braided cable

More information

TOP TOOLS GmbH Alter Flugplatz Vechta

TOP TOOLS GmbH Alter Flugplatz Vechta Unit No. CTC 001-006 Page 3 of 50 Internal Coiled Tubing Connector Coiled Tubing Connectors provide a means of attaching a tool string to the end of the coiled tubing. The connectors, when installed correctly,

More information

RENTAL TOOL SERVICES. Megaton Impact Tools

RENTAL TOOL SERVICES. Megaton Impact Tools Megaton Impact Tools Megaton Impact Tools optimize your drilling operations. Megaton Impact Tools Ulti-Torq high-torque, double shoulder connections Involute spline design High-strength steel developed

More information

Vibratory Downhole Tool Technologies with Application to Horizontal Drilling and Casing Installation

Vibratory Downhole Tool Technologies with Application to Horizontal Drilling and Casing Installation Vibratory Downhole Tool Technologies with Application to Horizontal Drilling and Casing Installation 2/5/2013 Roger L. Schultz TTS Drilling Solutions Presentation Overview Frictional Forces, Vibratory

More information

Coiled Tubing Solutions

Coiled Tubing Solutions E N H A N C I N G PRODUCTIVITY Coiled Tubing Solutions Solve Downhole Problems With Reliable, Cost-Effective Technology Baker Oil Tools Coiled Tubing Handbook The global oil and gas industry is using coiled

More information

Capillary Deliquification Safety System

Capillary Deliquification Safety System Capillary Deliquification Safety System Dick Klompsma Nederlandse Aardolie Maatschappij Douglas Westera Venture Production Nederland Bert de Vries Halliburton Introduction: Liquid loading of gas wells

More information

M&J Valve Product Overview

M&J Valve Product Overview M&J Valve Product Overview M&J Valve was founded in 1962 by Marvin Grove and has been a leader in the pipeline valve industry since its inception. Now part of SPX FLOW, M&J Valve meets or exceeds the quality

More information

QuickCut Casing Exit System RMN-Type or RHN-Type Anchor*

QuickCut Casing Exit System RMN-Type or RHN-Type Anchor* QuickCut Exit System * The latest generation of Weatherford s high-performance QuickCut casing exit system is now anchored by the innovative high-expansion MultiCatch whipstock anchor to provide a high-performance,

More information

Drop-In Inside Blowout Preventer Valve

Drop-In Inside Blowout Preventer Valve Drop-In Inside Blowout Preventer Valve Disassembly and Assembly Procedures Global Manufacturing, Inc. Lafayette, Louisiana USA 70508 Ph (337) 237-1727 Fax (337) 232-9353 Disassembly and Assembly Procedures

More information

Safety Valves. How Capillary is Integrated. Past and present. Agenda. Br oad Usage of Capillary Str ings

Safety Valves. How Capillary is Integrated. Past and present. Agenda. Br oad Usage of Capillary Str ings Agenda Broad usage by industry of capillary Tubing Retrievable Safety Valve W ells Can Now Receive A Micro String W ithout The Insertion Of A W ireline Insert Valve Or A W ork-over Re-cap of present technologies

More information

Surface Systems Technology Onshore and offshore production equipment that balance reliability, safety, and effectiveness

Surface Systems Technology Onshore and offshore production equipment that balance reliability, safety, and effectiveness Surface Systems Technology Onshore and offshore production equipment that balance reliability, safety, and effectiveness Table of Contents Shallow-water exploration wellhead systems Exact* adjustable wellhead

More information

Ballistics on Tractor Conveyance. Brian Schwanitz- VP Welltec. MENAPS 2011, Abu Dhabi

Ballistics on Tractor Conveyance. Brian Schwanitz- VP Welltec. MENAPS 2011, Abu Dhabi Ballistics on Tractor Conveyance Brian Schwanitz- VP Welltec MENAPS 2011, Abu Dhabi Outline Tractor Activity with Ballisticservices Tractor and Ballistic Safe Sub Operation Addressable Switches and Related

More information

Nut The standard bottom nut is a bullnose nut. Optional nut types, sub, mill, and side hill, are available.

Nut The standard bottom nut is a bullnose nut. Optional nut types, sub, mill, and side hill, are available. Overview Logan Releasing Spears provide a positive means to engage and retrieve an internal fish from the well. The design of this rugged, dependable, and inexpensive internal catch fishing tool ensures

More information

Coiled Tubing Tools Table of Contents Primary Tools Slim Line Dimple / Slip Connector...Page 6 Full Size Dimple / Slip Connector...Page 6 Slimconnect External Slip Connector...Page 7 External Slip Connector...Page

More information

SERVICE and PRODUCT CATALOGUE

SERVICE and PRODUCT CATALOGUE SERVICE and PRODUCT CATALOGUE We ll stay as long as you need us! Rangeview has a large list of motors and thru-tubing tools available. Our motors are the premium power to produce well made products that

More information

Downhole Electric Cutting Tool (DECT)

Downhole Electric Cutting Tool (DECT) Downhole Electric Cutting Tool (DECT) Deployable Anchors The DECT is a pipe severing tool that meets industry demands for safe, reliable, high precision cutting operations without using dangerous chemicals

More information

FAZEPRO Reversible invert-emulsion reservoir drill-in fluid system

FAZEPRO Reversible invert-emulsion reservoir drill-in fluid system FAZEPRO Reversible invert-emulsion reservoir drill-in fluid system For openhole completions on producer or injector wells: Oil-wet drilling performance. Water-wet filtercake removal simplicity. Get both

More information

Deepwater Solutions. Tesco offers casing and tubular running services for both land and offshore applications

Deepwater Solutions. Tesco offers casing and tubular running services for both land and offshore applications Deepwater Solutions Tesco offers casing and tubular running services for both land and offshore applications From North America to Indonesia, from Mexico to the North Sea, Tesco delivers superior tubular

More information

Full Flow Reverse Circulation Junk Baskets. Manual B320

Full Flow Reverse Circulation Junk Baskets. Manual B320 Full Flow Reverse Circulation Junk Baskets Manual B320 CONTENTS Logan Full Flow Reverse Circulation Junk Basket Overview... 2 Uses... 2 Construction... 2 Tool Illustration... 3 Operation... 4 Recovering

More information

SLIDING SLEEVE. BSS-S Profile BSS-H Profile

SLIDING SLEEVE. BSS-S Profile BSS-H Profile SLIDING SLEEVE BSS-S Profile BSS-H Profile BSS SLIDING SLEEVE INNER SLEEVE CLOSED POSITION TOP SUB UPPER SUB BODY SUB LOWER SUB BOTTOM SUB The Benoit Sliding Sleeve TM (BSS) is a premium Chrome Alloy flow

More information

Power & High Voltage Joslyn Hi-Voltage Overhead Reclosers & Switches H-220. Series HVI Hi-Velocity Interrupter Attachment

Power & High Voltage Joslyn Hi-Voltage Overhead Reclosers & Switches H-220. Series HVI Hi-Velocity Interrupter Attachment Use load interrupter attachments to enable loop sectionalizing, line dropping, load breaking and transformer-magnetizing current interruption. Increase the capability of your disconnect switches by adding

More information

Oiltools main product lines

Oiltools main product lines Archer Oiltools What we will cover The road from Seadrill to Archer The Well Company Services that Archer provide Archer s Global Footprint Archer Oiltools Global Footprint Archer Oiltools - What we do

More information

Ram Cushions and Pressure Parallels Dynamic Solutions For A Global Market

Ram Cushions and Pressure Parallels Dynamic Solutions For A Global Market Nitro-Dyne Ram Cushions and Pressure Parallels APPROVED 97/23/EC Dynamic Solutions For A Global Market Nitro-Dyne Ram Cushions and Pressure Parallels Table of Contents Page Introduction...2 The Advantages...3

More information

ALWAYS READY FOR YOUR BUSINESS MECHANICAL DRILLING RIG EQUIPMENT

ALWAYS READY FOR YOUR BUSINESS MECHANICAL DRILLING RIG EQUIPMENT ALWAYS READY FOR YOUR BUSINESS MECHANICAL DRILLING RIG EQUIPMENT Bentec rigs and drilling rig equipment Bentec branches BENTEC Advanced Technology for comprehensive drilling solutions. With years of experience,

More information

ULTIMATE DRILLING JARS

ULTIMATE DRILLING JARS ULTIMATE DRILLING JARS Dramatically increase the allowable overpull force and leave your competition in the dust. ULTIMATE DOUBLE ACTING HYDRAULIC DRILLING JAR The advantage of the Ultimate Double Acting

More information

The CIG is designed to fit any size of API rod insert pump.

The CIG is designed to fit any size of API rod insert pump. Carbide Insert Guide (CIG) Carbide Insert Guide (CIG) The installation of the Carbide Insert Guide (CIG) will eliminate the possibility of your rod insert pump problems of broken or severely worn holdown

More information

T BOP. prep. TC Cooper Cameron, Cameron Division

T BOP. prep. TC Cooper Cameron, Cameron Division T BOP The Cameron T blowout preventer offers a unique combination of benefits including safety, economy, reliability, extended service life, reduced height and fast and easy service. Side ram removal on

More information

HYDRAULIC WORKOVER SERVICES

HYDRAULIC WORKOVER SERVICES HYDRAULIC WORKOVER SERVICES Technology at work for you. Cudd Energy Services (CES) offers a diversified portfolio of solutions for today s well challenges. From a simple completion job to a complex well

More information

YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000

YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000 Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating

More information

Best Practices for Downhole Motor Operations in Coiled Tubing Applications

Best Practices for Downhole Motor Operations in Coiled Tubing Applications Best Practices for Downhole Motor Operations in Coiled Tubing Applications INTRODUCTION The application of downhole motors with coiled tubing operations has become routine in today s expanded scope of

More information

ISOLATION/UNIVERSAL TOOLS

ISOLATION/UNIVERSAL TOOLS ISOLATION/UNIVERSAL TOOLS stingercanada.com Grande Prairie 11303 96 Avenue Grande Prairie, AB T8V 5M3 780-513-3696 Calgary 420-510 5th Street SW Calgary, AB T2P 3S2 403-340-0716 Red Deer 334-28042 Hwy

More information

TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal

TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal transmitter performance Content TBV Valve Instrument

More information

DSL. Drilling Services Limited PROFESSIONAL DRILLING SERVICES AND EQUIPMENT

DSL. Drilling Services Limited PROFESSIONAL DRILLING SERVICES AND EQUIPMENT DSL Drilling Services Limited PROFESSIONAL DRILLING SERVICES AND EQUIPMENT DSL Drilling Services Limited N O T E S W E L C O M E Drilling Services Limited was incorporated in 2002, servicing the Oil &

More information

National Enduralube Bearings

National Enduralube Bearings Bearings The Worlds Most Reliable Bronze Bearing w w w. n ationalbronze.com National Bronze Mfg. Co. 800-875-3558 (Toll Free) 586-791-9044 (Fax) INTRODUCTION Since 1911 National Bronze Mfg. Co. has been

More information