High Purity PTFE Pumps

Air-Operated Double-Diaphragm. High Purity PTFE Pumps

Air-Operated Double-Diaphragm High Purity PTFE Pumps ULTRA High-Purity Series Ultra-High Purity Series was designed specifically for the Semiconductor Yamada s advantages come from years process of experience

High Purity PTFE Pumps

Air-Operated Double-Diaphragm High Purity Pumps www.yamadacorp.co.jp/global The Yamada Advantage When it comes to quality, performance and reliability, thereʼs no better value in high-purity pumps than

Yamada America, Inc. 955 E. Algonquin Road Arlington Heights, IL Toll-Free Phone Fax

Yamada America, Inc. 955 E. Algonquin Road Arlington Heights, IL 65 8 99-7867 Toll-Free 847 631-92 Phone 847 631-9273 Fax E-mail: sales@yamadapump.com Web: www.yamadapump.com The Yamada Corporation has

Meet Yamada... TABLE OF CONTENTS

Table of Contents Meet Yamada... The Yamada Corporation has been a leading producer of industrial equipment since 195, and of fluid handling products for over years. As a pioneer of pumping technology,

Series IW. Filter Regulator

Standard Specifications Model IW212 IW213 IW215 IW222 Adjustable type (Basic) Fixed type Maximum supply pressure Max. 1. MPa.3 to 1. MPa Set pressure.2 to.2 MPa.2 to.3 MPa.2 to.5 MPa.14 MPa Air consumption

HIGH PURITY PTFE AIR DIAPHRAGM PUMPS

HIGH PURITY PTFE AIR DIAPHRAGM PUMPS HIGH PURITY MACHINED PTFE PUMPS PTFE PUMPS Machined PTFE Design NPT/BSP or ANSI/DIN Flange Connections 1/4, 3/8, 1/2, 1, 1-1/2, 2 Inch Sizes Available Max Temperature

How to Order 02 1/4. Thread type Nil Rc N NPT * * Semi-standard

Filter Regulator IW Series Two types are available: adjustable set pressure type and fixed set pressure type. Low/High temperature and external parts copper-free types can be selected. Pressure gauge connecting

NDP-25 Specifications

NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air

Transmitters: Relay Valve VR4151/4152

Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2

Miniature Regulator Series ARJ310

Miniature Regulator Series 30 Compact and lightweight (Main body 65 g) 8.3 Improved flow characteristics 0. 0. 0 00 00 300 400 500 Allows smaller mounting pitch 8.8mm 0-M5 30-0 Inlet pressure: MPa Accommodates

DP Series Specifications

DP Series Specifications DP-10 Port Dimensions Intake & discharge connection: Polypropylene (PPG) Aluminum (ADC-12) Stainless Steel (316) (6 GPM Max.) 3/8" Female NPT 3/8" Female NPT 3/8" Female NPT DP-15

Air Powered Double Diaphragm Pumps

Air Powered Double Diaphragm Pumps Notes. TC-X 030 Series Standard Diaphragm Pumps with 1/4" Connections Liquid Flow Rate: Maximum Air Inlet Pressure: Wetted Body Material Options; 1 to 8 L/min. (2.14

Aluminum Dimensions: 7.32" W 9.49"H Net Wt.: 7.9 lbs. (3.6 kg) Shipping Wt.: 9.9 lbs. Stainless Steel

DP Series Specifications DP-10 Port Dimensions (6 GPM Max.) Intake & discharge connection: Polypropylene (PPG) 3/8" Female NPT Aluminum (ADC-12) 3/8" Female NPT Stainless Steel (316) 3/8" Female NPT DP-15

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head

G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with

OPERATION MANUAL YAMADA AIR-OPERATED DIAPHRAGM PUMPS. NDP-5 series DP-10 series NDP-15 series

Doc. No. NDP174U-13 OPERATION MANUAL YAMADA AIR-OPERATED DIAPHRAGM PUMPS NDP-5 series DP-10 series NDP-15 series Introduction Thank you for purchasing a Yamada Diaphragm Pump. This product is a positive-displacement

F20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads

F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E

NDP-50 Specifications

NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped

Yamada America, Inc. 955 East Algonquin Road Arlington Heights, Illinois Toll-Free Phone Fax

Yamada America, Inc. 955 East Algonquin Road Arlington Heights, Illinois 60005 800 990-7867 Toll-Free 847 631-9200 Phone 847 631-9273 Fax E-mail: sales@yamadapump.com Web: www.yamadapump.com The Yamada

Air Inlet/ Discharge Port

Metering Pumps The ProMinent is a pneumatically-actuated metering pump with a capacity in the 0.1 to 3.9 gph (0.24 to 14.8 l/h) range at maximum backpressures of 21 to 232 psig (0.9 to 16 bar). The consists

Series ITV0000. Compact Electro-Pneumatic Regulator ITV N Q. IITV00 02 n. How to Order. For single unit and single unit for manifold

Compact Electro-Pneumatic Regulator Series ITV How to Order For single unit and single unit for manifold ITV N Q Pressure range. MPa MPa.9 MPa Power supply voltage 4 VDC ±% to VDC Cable connector N S L

Electro-Pneumatic Regulator Electronic Vacuum Regulator

Electro-Pneumatic Regulator Electronic Vacuum Regulator New Stepless control of air pressure proportional to an electrical signal Added Fieldbus compliant specifications to Series ITV//! Reduced wiring

Electro-Pneumatic Regulators. Electronic Vacuum Regulators

Electro-Pneumatic Regulator Electronic Vacuum Regulator Stepless control of air pressure proportional to an electrical signal Added Fieldbus compliant specifications to New Series Reduced wiring Series

Electro-Pneumatic Regulators. Electronic Vacuum Regulators

Electro-Pneumatic Regulator Electronic Vacuum Regulator New Reduced wiring Applicable Fieldbus protocols Compact & light Weight: g Note ) (ITV) Power consumption: 4 W Note ) or less Electro-Pneumatic Regulators

Electro-Pneumatic Regulators. Electronic Vacuum Regulators

Electro-Pneumatic Regulator Electronic Vacuum Regulator New Reduced wiring Applicable Fieldbus protocols Compact & light Weight: g Note ) (ITV) Power consumption: 4 W Note ) or less Electro-Pneumatic Regulators

G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head

G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25

103 bar (1500 psi) for Metallic Pump Heads

G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35

A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP

A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting SPECIFICATIONS

Valve Accessories NEW! Wanner Engineering Inc

Valve Accessories NEW! Wanner Engineering Inc Back Pressure Valves Diaphragm Back Pressure Valves enhance the performance of precision metering systems by applying a continuous back pressure to the EPM

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head

G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10

1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110

Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902

25% reduction in volume * PB1013A/Air-operated type without foot

Process Pump (Diaphragm Pump) Series Compact, large capacity diaphragm pump, suitable for transferring and collecting a wide range of fluids Smaller, lighter, lmtop size Pa 5% reduction in volume * 11A/Air-operated

Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm

Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky

69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads

G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25

F-SERIES FDA AIR DIAPHRAGM PUMPS

F-SERIES FDA AIR DIAPHRAGM PUMPS FDA AIR DIAPHRAGM PUMPS DIMENSION FDA PUMPS FDA Grade Elastomers Electropolished and Passivated Stainless Steel Wet End Parts Oversized Tri-Clamp Connection Standard Limited

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head

G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10

G35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head

G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head

Customer Service Product Training Research & Development Parts and Service for All Yamada Pumps Application Engineering Industry Knowledge

The Yamada Corporation has been a leading producer of industrial equipment since 195, and of fluid handling products for over 6 years. As a pioneer of pumping technology, Yamada is known in many industries

G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head

G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump

OWNER S TECHNICAL MANUAL

OWNER S TECHNICAL MANUAL 1 2 Air Operated Diaphragm Pump NDP- 15FPH 1. Names of parts and materials (excluding FP ) A. Air Valve B. Reset Button C. Out Manifold D. Out Chamber E. In Manifold F. Pump Base

Precision Clean Regulator

Precision Clean Regulator Series AR45 AMR ARM -A VY AP00 High precision, low flow consumption stainless steel regulator 869 Precision Clean Regulator Series High precision, low flow consumption stainless

High-Performance Air-Powered Double Diaphragm Pumps

www.yamadacorp.co.jp/global High-Performance Air-Powered Double Diaphragm Pumps About Yamada... Yamada Corporation International Department No.1-3, 1-Chome, Minami-Magome, Ohta-ku,Tokyo 143-8504, Japan

D/G-04 Series. Up to 3.0 gpm (11.3 l/min)

D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175

Doc. No. NDP 058M-01 MAINTENANCE MANUAL YAMADA PULSATION DAMPENER SERIES. AD Series AD-TT Series AD-TT/N Series

Doc. No. NDP 058M-01 MAINTENANCE MANUAL YAMADA PULSATION DAMPENER SERIES AD Series AD-TT Series AD-TT/N Series WARNING - For safety reasons, be sure to read this maintenance manual thoroughly before starting

3:1 MOBILE LUBE PACKAGES (55 gal)

3:1 MOBILE LUBE PACKAGES (55 gal) Dolly-mounted oil dispenser kits with digital metered valve and 3:1 pumps. Available with or without hose reel. The ideal combinations for dispensing oil in any workplace.

Versatile, Reliable Pumps for a Wide Range of Applications H25 Series

Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the

Sanitary Valves JSB Series Back Pressure Valves

3L/T-2R/S33 Series JS Series Compact, High Purity ack Pressure Regulating Valve J-Pure is the first fully drainable compact back pressure regulator designed and built specifically for hygienic, ASME PE

Versatile, Reliable Pumps for a Wide Range of Applications D10 Series

Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the

A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP

A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting 2 STAINLESS

Piping labor reduced A flexible system has been adopted. E-P HYREG. Cylinder behavior and pressurization control. Example

E-P HYREG VY Series This hybrid regulator combines a regulator and a solenoid valve. Stepless control through electric signals Port sizes M5 to inches can be covered by combining an ultra-compact electro-pneumatic

Miniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure

Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing

Husky 716 Metal Pumps Air-Operated Double-Diaphragm

Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled

VCHR Series. Direct Operated Regulator for 6.0 MPa (Relieving Type) Service life: 10 million cycles. How to Order

Direct Operated Regulator for 6.0 MPa (Relieving Type) VCHR Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high pressure

Clean Regulator. SRH Series. Contamination controlled stainless steel regulator ARJ

Clean Regulator Series IR IRV VEX SRP ITV IC T AP1 Contamination controlled stainless steel regulator 855 Clean Regulator Series Contamination controlled stainless steel regulator Oil free Outstanding

Compact Proportional Solenoid Valve

Compact Proportional Solenoid Valve Series Repeatability: % or less Hysteresis:1% or less Fluid Flow rate control range Note) Series Air, Inert gas to L/min to L/min Note) Varies depending on the model.

Series VCHR. Direct Operated Regulator for 6.0 MPa (Relieving Type) Service life: 10 million cycles. How to Order

Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane

1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)

Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm

H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs

H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25

How to Order ITV N. Nil. EXHc. Base type. Nil. ø1/4"

Compact Electro-Pneumatic Regulator Series ITV RoHS How to Order [Option] For single unit and single unit for manifold ITV N Pressure range. MPa. MPa.9 MPa Power supply voltage 4 VDC ±% to VDC Cable connector

CHEM-FEED. Engineered Skid Systems. ProSeries. by Blue-White Ind.

CHEM-FEED Engineered Skid Systems R Single pump model number CFS-1AA-AAAAAA Shown with Chem-Pro C2 pump, sold separately Dual pump model number CFS-2AA-AAAAAA Shown with Flex-Pro A3 pump, sold separately

TC-X PRODUCT GUIDE AIR POWERED DOUBLE DIAPHRAGM PUMPS

TC-X 2018 PRODUCT GUIDE AIR POWERED DOUBLE DIAPHRAGM PUMPS Diaphragm Pump Characteristics Air Powered Double Diaphragm Pumps Manufactured in Japan with Superior Quality & Finish. Designed for High Performance

Redefining Performance

SAVE Energy SAVE Compressor Cost SAVE Operator Cost Redefining Performance Reduces air consumption up to 50% Adapts to process conditions Powered only by compressed air Saves energy while maintaining flow

Standard Specifications

Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube

G03 Mono-Block Series

G03 Mono-Block Series Maximum Flow Rate: 11.7 l/min (3.1 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads ATEX Mono-Block (G03) Shaft-driven with Stainless Steel pump head Mono-Block (G03)

CenterFlo Pumps. Air Operated Double Diaphragm (AODD) Pumps. Automotive Commercial Industrial

CenterFlo Pumps Air Operated Double Diaphragm (AODD) Pumps Automotive Commercial Industrial CenterFlo NEW CenterFlo Technology Diaphragm Pumps Advanced Technology, Superior Performance, Low Maintenance.

INNOVATIVE AND RELIABLE DESIGN

INNOVATIVE AND RELIABLE DESIGN The Yamada Corporation has been a leading producer of industrial equipment since 1905 and of fluid handling products for over 65 years. As a pioneer of pumping technology,

MAINTENANCE MANUAL. YAMADA PULSATION DAMPENER SERIES AD Series AD-TT Series AD-TT/N Series. Doc. No. NDP 058M-13

MAINTENANCE MANUAL YAMADA PULSATION DAMPENER SERIES AD Series AD-TT Series AD-TT/N Series Doc. No. NDP 058M-13 WARNING - For safety reasons, be sure to read this maintenance manual thoroughly before starting

P40 Series Foam Concentrate Pump

Description Chemguard foam concentrate pumps are constructed of corrosion resistant brass and stainless steel, and are designed for use with all types of fire fighting foam concentrates. The pumps are

G15 Series API bar (2500 psi) for Metallic Pump Heads. G15 for horizontal installations shown with Stainless Steel pump head.

G15 Series Maximum Flow Rate: Maximum Pressure: 58.7 l/min (15.5 gpm) 172 bar (2500 psi) for Metallic Pump Heads API 674 ATEX G15 for horizontal installations shown with Stainless Steel pump head. G15

G66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head.

G66 Series Maximum Flow Rate: Maximum Pressure: 248.7 l/min (65.7 gpm) 48 bar (7 psi) for Metallic Pump Heads 17 bar (25 psi) for Non-metallic Pump Heads API 674 ATEX G66 with Ductile Iron pump head www.hydra-cell.eu

G04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head

G04 Series Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads ATEX G04 with Stainless Steel pump head G04 with Brass pump head G04 with Stainless Steel

Fluid Dispensing Systems

Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028

G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16

G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21

Air Powered Double Diaphragm Pumps. Polypropylene Pumps. Made In Japan

Air Powered Double Diaphragm Pumps 2016 Polypropylene Pumps Made In Japan Presenting YTS Double Diaphragm Pumps Made In Japan Non-Lubricated Design High Flow Rates Efficient Air Consumption Easy & Fast

Operating Instructions ProMinent. Backpressure and Pressure Relief Valves

Operating Instructions and Valves Contents Page Safety Instructions... 2 Unpacking... 2 Introduction... 2 Installation... 3 Description of Controls & Operation... 5 Helpful Tips... 5 Specifications...

pressure regulators Back Pressure Regulators

Back Pressure Regulators Index BP-3 Series 1 BP-6 Series 4 BP-8 Series 7 BP-8LF Series 10 CBP-3 Series 13 LB-1 Series 16 SBPR Series 19 BP-60 Series 22 BP-66 Series 25 GO Regulator 405 Centura Court PO

Millennium TM. 100 thru 675 Tons (315 thru 2375 kw) renewal parts. Supersedes: RP1 (1099) Form RP1 (710) R-22 and R-134a 00202VIP

Millennium TM Rotary Screw Liquid Chillers renewal parts Supersedes: 160.80-RP1 (1099) Form 160.80-RP1 (710) Model YS BA CB S0 thru YS FA FB S5 (Style E) 100 thru 675 Tons (315 thru 2375 kw) 00202VIP R-22

Versatile, Reliable Pumps for a Wide Range of Applications D35 Series

Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the

Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series

Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that

FGMDLPG-1 Flow Meter FGMDLPG-1 flow meter is made by cast Aluminum, small size, light weight, used in Liquid Gas Dispenser. Max 5~60L Discharge rate per revolution : 0.5L/r Adjustable Minimum Volume: 0.001

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation. Motion & Flow Control Products, Inc

Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our

Electro-Pneumatic Regulator/Electronic Vacuum Regulator

Electro-Pneumatic Regulator/Electronic Vacuum Regulator Series Stepless control of air pressure proportional to an electrical signal // series are compatible with various input specifications, including

H25 Series. Maximum Flow Rate: 20.0 gpm (75.9 l/min) Maximum Pressure: 1000 psi (69 bar) for Metallic Pump Heads

25 Series Maximum Flow Rate: 2. gpm (75.9 l/min) Maximum Pressure: 1 psi (69 bar) for Metallic Pump eads 25 Series Performance apacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min 25-115

Hydracel High Pressure Pump

Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1

Check Valve Series AK How to Order

High flow capacity Low cracking pressure:.2mpa Check Valve Series AK How to Order N AK 2 2 Compact and light weight Area Code Japan, Asia, Nil Australia, UK N U.S.A. 2 4 6 Body size /4 /2 /8 2 /4 3 3/8

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation BALLVALVE.COM

Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our

Power Valve: Economy Valve. Standard Specifications. Model VEX55-04

Three functions (pressure regulator, switching valve, and speed controller) are provided by a single valve. The conventional valve combination circuit has been condensed into a single valve. A large capacity

Evans SS-G & GXL -Series Integrated Stainless Gas Sticks

SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator

Ultra-Matic Air Valve System

Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.

DDA AR-PVC/V/C with access.

GRUNDFOS DATA BOOKLET DDA 7.5-16 AR-PVC/V/C with access. Grundfos pump 97974077 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/ddafam/97974077/dda-7-5-16-with-access.html

H/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs

H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for

F/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump

f/g-20 hydra-cell diaphragm pump F/G-20 Series Up to 1.0 gpm (3.8 l/min) F/G-22 with Pump/Motor Adapter for coupling to NEMA C-Face and IEC B5 Flange motors F/G-20 hollow shaft for close coupling with

4 Note 1) Value for communications type. (PROFIBUS DP)

Electro-Pneumatic Regulator/Electronic Vacuum Regulator Series Stepless control of air pressure proportional to an electrical signal Series // are compatible with various input specifications, including

D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs

D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for

Spare part lists Futur

Spare part lists Futur Futur T Futur H Futur E Optional equipment Pulsation damper D Spare part list ALMATEC FUTUR pump series, 0 T - T Edition 23/04 Pump size FUTUR 0 T FUTUR 20 T FUTUR 50 T FUTUR T Item

D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs

D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete

Low shear, low pulsation performance delivers superior finish quality

TRITON 3:1 irculating Pumps TRITON 13HP 23375 & 233751 TRITON 38HP 23385 & 233816 Low shear, low pulsation performance delivers superior finish quality FETURES ND ENEFITS Low pulsation output provides

Standard Specifications

Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube

EV2100V Series OUT VAC EV2100V. Specifications. 196kPa 196kPa Control pressure range Assured pressure range Power voltage Current consumption

pneumatic regulator (solenoid type for vacuum) EVV Series JIS symbol EVV CAD DATA AVAILABLE. How to order Overview For electro pneumatic regulator EVV series, feedback control with semiconductor pressure

Standard Specifications. Model IN side OUT side Fluid Proof pressure Maximum operating pressure

Miniature Regulator Series ARJ1020F 2 Construction/Dimensions Lock nut M8 X 0.75 Panel screw Panel mounting hole Precautions Be sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety

PFA015 Owner s Manual

E. 0 S., Kamas, UT 0..00.9. https://wkfluidhandling.com engineer approved PFA0 Owner s Manual Table of Contents. Product Information. Specifications & Performance.... Temperature Limits.... Dimensions....