Tekonsha Push-To-Test Breakaway Kit with Integrated Multi-Stage Charger ( ) Pro Series Push-To-Test Breakaway Kit with Charger ( )

Transcription

1 Push-To-Test Breakaway Kit with Integrated Multi-Stage Charger ( ) Pro Series Push-To-Test Breakaway Kit with Charger ( ) For proper performance of a breakaway system, battery must be maintained at a minimum of 80% capacity or greater. This charge level is required to deliver enough current to the trailer brakes to be effective. The optimum charge level is 100%. By setting our Recharge (Red) threshold at 80%, allows the operator ample opportunity to recharge the unit. For up to 3 axles Flat surface mounting Post mount bracket available (P/N ) Kits Include: 5 Amp/hr Battery Breakaway Switch w/7.5 lead wires Battery Box Charger M-1

2 BREAKAWAY SYSTEMS AND ACCESSORIES Push to Test Breakaway Systems Breakaway Systems Breakaway Switches Battery Chargers Sealed Lead Acid Batteries Battery Cases ELECTRIC TRAILER BRAKE REPLACEMENT PARTS Electric Trailer Brake Replacement Parts Electric Trailer Brake Assemblies Electric Trailer Brake Assemblies Self Adjusting Magnets / Bearing Sets Reference Guide Brake Part Reference Guide Wheel Nuts / Bolts WHEEL PROTECTION Wheel Bearing Kits Bearing Protectors Grease Caps Plastic Fenders HindSight Camera System Trailer Alignment Tire Chocks Safety Chains and Accessories D-Rings / Tow Hooks Spare Tire Carriers Boat Guides / Marine Grade Carpeting WaterWick Assist Bars M-2

3 Push to Test Breakaway Systems Push to Test Breakaway System Push to Test: LED s indicate fully charged, charging or recharge Multi-Stage Integrated Charger provides a fast recharge up to 12.8 volts. Once battery is fully charged, the automatic float mode is designed to provide a continuous charge without overcharging. Activates trailer brakes upon separation of trailer and tow vehicle For use on 1, 2 or 3 axle trailers equipped with electric brakes Weather/corrosion resistant, heavy-duty polymer case to protect battery and charger Quick and easy to install Breakaway Switch w/7.5 lead wires 5 Amp/hr Battery Battery Box, dimensions 5 x x 4 Flat Surface Mounting (Note: optional post mount bracket available) 1 year limited warranty Note: Make sure battery is fully charged prior to towing (Bracket Sold Separately) Push to Test Breakaway System with Multi-Stage Integrated Display Box - Charger Accessory Part Post Mount Bracket Bulk Push to Test Breakaway System Push to Test: Led s indicate fully charged, charging or (needs) recharge Built in battery charger charges battery when plugged into the tow vehicle Activates trailer brakes upon separation of trailer and tow vehicle For use on 1, 2, or 3 axle trailers equipped with electric brakes 1 year limited warranty Note: Make sure battery is fully charged prior to towing Push to Test Breakaway System with Charger Display Box - Pro Series Accessory Part Post Mount Bracket Bulk M-3

4 Breakaway Systems (Bracket Sold Separately) Breakaway Systems Activates trailer brakes upon separation of trailer and tow vehicle For use on 1, 2 or 3 axle trailers equipped with electric brakes Weather/corrosion resistant, heavy-duty polymer case to protect battery and charger P/N contains battery charger Quick and easy to install Breakaway Switch w/7.5 lead wires 5 Amp/hr Battery Battery Box, dimensions 5 x x 4 Flat Surface Mounting (Note: optional post mount bracket available) 1 year limited warranty Note: Make sure battery is fully charged prior to towing Breakaway System Boxed Breakaway System with Charger Boxed Accessory Parts Post Mount Bracket Bulk and 4 axle trailers require minimum 5 Amp-hr battery. For optimal performance, replacement of breakaway electrical components is recommended every 3 to 5 years. Push to Test Breakaway kit w/ built-in battery CHARGER Complete system includes switch, 12 volt battery, battery box with built-in charger, mounting screws and installation instructions. Provides neat, efficient battery connection Convenient test button verifies battery charge Built-in battery charger 1 or 2 axle capacity 5 amp/hr battery 1 year limited warranty Note: Make sure battery is fully charged prior to towing Trailer Breakaway Kit Display Box - Tow Ready M-4

5 Breakaway Systems M / 1028 / 2026 / 2028 Systems & 2018 Case / Systems & 2051 Case / Systems & Case / Systems & Case Battery Terminals Included in systems 3 and 4 axle trailers require minimum 5 Amp-hr battery. For optimal performance, replacement of breakaway electrical components is recommended every 3 to 5 years. Breakaway Systems For use on 1, 2, 3 and 4 axle trailers equipped with electric brakes. These complete systems incorporate the highest quality components in trailer breakaway systems. Meet or exceed Department of Transportation (DOT) specifications regarding trailer breakaway and holding requirements. If a breakaway occurs between your tow vehicle and your trailer, the breakaway systems will automatically apply consistent braking power to your trailer brakes. Quick and easy to install, the systems comes with a weather/corrosion resistant, heavy-duty polymer case to protect the battery and charger. Breakaway System - For use on 1 & 2 axle trailers with electric brakes Includes 2018 Polymer Battery Case w/a-frame or Post Mounting Bracket; 2023 Rechargeable Sealed 12v 5 Amp-hr Lead Acid Battery & Terminals; 2005-P Breakaway Switch. Display Box - Breakaway System - For use on 1, 2 & 3 axle trailers with electric brakes Includes Lockable All Polymer Battery Case w/flat Surface Mounting; 2023 Rechargeable Sealed 12v 5 Amp-hr Lead Acid Battery & Terminals; Breakaway Switch. Bulk Breakaway System - For use on 1, 2, 3 & 4 axle trailers with electric brakes Includes 2018 Polymer Battery Case w/a-frame or Post Mounting Display Box - Bracket; 2023 Rechargeable Sealed 12v 5 Amp-hr Lead Acid Battery & Terminals; 2010-P Breakaway Switch Includes 2051 Lockable All Polymer Battery Case w/flat Surface Display Box - Mounting; 2023 Rechargeable Sealed 12v 5 Amp-hr Lead Acid Battery & Terminals; 2010-P Breakaway Switch Includes Lockable Polymer Battery Case w/weldable Flat Surface Mounting; 2023 Rechargeable Sealed 12v 5 Amp-hr Lead Acid Battery & Terminals; 2010-P Breakaway Switch. Display Box - Breakaway System With Charger - For use on 1, & 2 axle trailers with electric brakes Includes 2018 Polymer Battery Case w/a-frame or Post Mounting Bracket; 2023 Rechargeable Sealed 12v 5 Amp-hr Lead Acid Battery & Terminals; 2005-P Breakaway Switch; 1024 DC-to-DC Accelerated Battery Charging Device (ABCD). Display Box - Breakaway System With Charger - For use on 1, 2 & 3 axle trailers with electric brakes Includes Lockable All Polymer Battery Case w/flat Surface Mounting; 2023 Rechargeable Sealed 12v 5 Amp-hr Lead Acid Battery & Terminals; Breakaway Switch; DC-to-DC Accelerated Battery Charging Device (ABCD). Bulk Breakaway System With Multi-Stage Integrated Charger - For use on 1, 2, 3 & 4 axle trailers with electric brakes Includes 2018 Polymer Battery Case w/a-frame or Post Mounting Display Box - Bracket; 2023 Rechargeable Sealed 12v 5 Amp-hr Lead Acid Battery & Terminals; 2010-P Breakaway Switch; DC-to-DC Heavy Duty Quick/Maintenance (Multi Stage) Battery Charger Includes 2051 Lockable All Polymer Battery Case w/flat Surface Display Box - Mounting; 2023 Rechargeable Sealed 12v 5 Amp-hr Lead Acid Battery & Terminals; 2010-P Breakaway Switch; DC-to-DC Heavy Duty Quick/Maintenance (Multi Stage) Battery Charger Includes Lockable Polymer Battery Case w/weldable Flat Surface Mounting; 2023 Rechargeable Sealed 12v 5 Amp-hr Lead Acid Battery & Terminals; 2010-P Breakaway Switch; DC-to-DC Heavy Duty Quick/Maintenance (Muti Stage) Battery Charger. Display Box -

6 Breakaway Switches / Sealed Batteries / Battery Chargers Switch 2010 Switch 2005 Switch 2009 Switch Breakaway Switches Completely sealed breakaway switches to automatically set trailer brakes in case of accidental trailer breakaway. Required by law in some states. Emergency use only, not to be used to lock brakes when parked or stored. 2010, and 2005 have reinforced nylon case, weldable metal tab, nylon pin assembly and are rust and corrosion free has all metal parts and a brass pin assembly Breakaway Switch w/ 48 wires w/cable & Nylon Pin Assembly Bulk Breakaway Switch w/ 48 wires w/cable & Nylon Pin Assembly Bagged - Bargman 2010-B125 Breakaway Switch w/ 48 wires w/cable & Nylon Pin Assembly Bulk 2010-P Breakaway Switch w/ 48 wires w/cable & Nylon Pin Assembly Clam B120 Breakaway Switch w/ 48 wires w/cable & Nylon Pin Assembly (for Bulk use with 1-3 axle trailers) 2005-P Breakaway Switch w/ 48 wires w/cable & Nylon Pin Assembly (for Clam - use with 1-3 axle trailers) 2009-B60 Breakaway Switch w/ 48 wires w/cable & Brass Pin Assembly Bulk 2009-P Breakaway Switch w/ 48 wires w/cable & Brass Pin Assembly Clam - REplacement parts Replacement Cable & Nylon Pin Assembly (for Switch) Bulk Replacement Cable & Nylon Pin Assembly (for Switch) Bagged - Bargman 2010-A 48 Replacement Cable & Nylon Pin Assembly (for 2010 Switch) Bulk 2010-A-P 48 Replacement Cable & Nylon Pin Assembly (for 2010 Switch) Clam A 48 Replacement Cable & Nylon Pin Assembly (for 2005 Switch) Bulk 2009-A 48 Replacement Cable & Brass Pin Assembly (for 2009 Switch) Bulk 2009-A-P 48 Replacement Cable & Brass Pin Assembly (for 2009 Switch) Clam Battery Most states require breakaway switch with separate power supply when towing a trailer Charger Charger 1024/ Charger Sealed Lead Acid BatterY 12v, sealed lead acid battery for use with Breakaway Systems on single, tandem and tri-axle trailers equipped with electric brakes. Battery requires periodic recharging to maintain optimum performance Amp-hr Sealed Battery Bulk 2023-X 5 Amp-hr Sealed Battery Display Box - Battery Chargers For all 12v battery systems with a 4 Amp-hr minimum output is designed to fit securely into the Breakaway Battery Cases. Temperature compensated design provides continuous recharge with automatic float mode feature to prevent overcharging. 1024/ will return trailer breakaway system batteries to their maximum potential. Patent pending features an automatic float mode to prevent overcharging. Ideal for seasonal storage and maintenance of recreational vehicles, motorcycles, snowmobiles, lawn tractors, and more DC-to-DC Accelerated Battery Charging Device (ABCD) Bulk 1024 DC-to-DC Accelerated Battery Charging Device (ABCD) Clam DC-to-DC Heavy Duty Multi Stage/Maintenance Charger Bulk S DC-to-DC Heavy Duty Multi Stage/Maintenance Charger Clam AC-to-DC Multi Stage Maintenance Charger Clam - Battery Cases Rust-proof heavy duty polymer cases protect battery and charger from elements and corrosion. Featuring U-shaped clamp style fastener on #2018 to mount over most trailer tongues, #2051/ is a lockable case, and #20000 features a galvanized metal mounting bracket with locking bar for secure battery protection Battery Case - One-Bolt Installation on Jackpost or A-Frame Bulk 2051 Battery Case - Four-Bolt Installation on Flat Surface Bulk Battery Case - Four-Bolt Installation on Flat Surface Bulk Battery Case - Two-Bolt or Weldable Installation on Flat Surface Bulk M-6

7 Trailer Brake Replacement Parts 10 x 21/4 Hardware Actuating Lever - R.H Actuating Lever - L.H Magnet Kit Return Spring Set (Axle Set) Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly) Grease Seal & Cap 6604/ Seal (Axle Set) Grease Cap (Axle Set) Bearing Sets Bearing Set - Inner Bearing Set - Outer Brake Shoes Shoe and Lining Kit (Wheel Set) Brake Assembly 6709TEK Complete Assembly - L.H Complete Assembly - R.H. 12 x 2 Hardware Actuating Lever - R.H Actuating Lever - L.H Magnet Kit 6K & 7K Return Spring Set (Axle Set) Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly Grease Seal & Cap 6605/ Seal (Axle Set) (Replace in Pairs) Grease Cap (Axle Set) for Grease Cap (Axle Set) for 5509 Bearing Sets Bearing Set - Inner Bearing Set - Outer Large Bore Bearing Set - Outer - Small Bore Brake Shoes Shoe and Lining Kit (Wheel Set) Brake Assembly 6713 Complete Assembly - L.H Complete Assembly - R.H. M-7

8 Trailer Brake Replacement Parts Dexter 7 x 1 1/4 Hardware (N/A) 1 Actuating Lever - R.H. (N/A) 1 Actuating Lever - L.H. (N/A) 2 Magnet Kit 5113*** 2 Magnet Kit Hardware (Axle Set) 5320* 3 Return Spring 5320* 4 Hold Down Clips 5320* 5 Adjusting Screw Spring 5320* 6 Adjusting Screw Assembly Grease Seal & Cap Seal - BTR (Axle Set) Grease Cap (Axle Set) Bearing Sets Bearing Set - Inner & Outer Brake Shoes Shoe and Lining Kit (Wheel Set) *Contained in Hardware Kit (Axle Kit) ***5113 After (N/A) - No Longer Available Dexter 10 x 1 1/2 Hardware (N/A) 1 Actuating Lever - R.H. (N/A) 1A Actuating Lever - R.H. (N/A) 1 Actuating Lever - L.H. (N/A) 1A Actuating Lever - L.H. 5113* 2 Magnet Kit 5118** 2A Magnet Kit Return Spring Set (Axle Set) (N/A) 4 Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly) Grease Seal & Cap Seal (Axle Set) Grease Cap (Axle Set) Bearing Sets Bearing Set - Inner Bearing Set - Outer Brake Shoes Shoe and Lining Kit (Wheel Set) *Prior to Mid 1988 **After Mid 1988 (N/A) - No Longer Available M-8

9 Trailer Brake Replacement Parts Dexter 10 x 2 1/4 Hardware Actuating Lever - R.H Actuating Lever - L.H Magnet Kit Return Spring Set (Axle Set) Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly) Grease Seal & Cap Seal (Axle Set) Grease Cap (Axle Set) Bearing Sets Bearing Set - Inner (Prior to Dec. 1983) Bearing Set - Inner (After Dec. 1983) Bearing Set - Outer Brake Shoes Shoe and Lining Kit (Wheel Set) Brake Assembly 5707 Complete Assembly - L.H Complete Assembly - R.H. Dexter 12 x 2 Hardware Actuating Lever - R.H Actuating Lever - L.H Magnet Kit Return Spring Set (Axle Set) A Single Retractor B Dual Retractor 5353* 4 Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly) *Replacement Kit Uses Coil Springs **Prior to 1997 ***After 1997 (A Series Only) Grease Seal & Cap 5606** 7 Seal (Axle Set) 5608*** 7 Seal (Axle Set) Grease Cap (Axle Set) Bearing Sets Bearing Set - Inner Bearing Set - Outer Brake Shoes 5000-DX 11 Shoe and Lining Kit (Wheel Set) Brake Assembly 5711 Complete Assembly - L.H Complete Assembly - R.H. M-9

10 Trailer Brake Replacement Parts Dexter 12 x 2 7K Hardware Actuating Lever - R.H Actuating Lever - L.H Magnet Kit Return Spring Set (Axle Set) Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly) *Prior to 1997 **After 1997 (A Series Only) Grease Seal & Cap 5606* 7 Seal (Axle Set) 5608** 7 Seal (Axle Set) Grease Cap (Axle Set) Bearing Sets Bearing Set - Inner Bearing Set - Outer (865 HUB) Bearing Set - Outer (UTG Hub) Brake Shoes Shoe and Lining Kit (Wheel Set) Hayes 10 x 1 5/8 Hardware (N/A) 1 Actuating Lever - R.H. (N/A) 1A Actuating Lever - R.H. (N/A) 1 Actuating Lever - L.H. (N/A) 1A Actuating Lever - L.H. 5105* 2 Magnet Kit (4.5K Axles) 5106** 2A Magnet Kit (6K & 7K Axles) 5101-HA*** 2B Magnet Kit - White Wire Return Spring Set (Axle Set) (N/A) 4 Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly) Grease Seal & Cap Seal (Axle Set) Grease Cap (Axle Set) Bearing Sets Bearing Set - Inner Bearing Set - Outer Brake Shoes (N/A) 11 Shoe and Lining Kit (Wheel Set) *Prior to Mid 1987 **After Mid 1987 ***After Late 1994 (Replace in Pairs) (N/A) - No Longer Available M-10

11 Trailer Brake Replacement Parts Hayes 10 x 21/4 Hardware (N/A) 1 Actuating Lever - R.H. (N/A) 1A Actuating Lever - R.H. (N/A) 1 Actuating Lever - L.H. (N/A) 1A Actuating Lever - L.H. 5105* 2 Magnet Kit 5106** 2A Magnet Kit 5101-HA 2B Magnet Kit-White Wire After Late 1994 (Replace in Pairs) Return Spring Set (Axle Set) A Single Retractor 5305**** 3B Dual Retractor Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly) Hayes 12 x 2 Grease Seal & Cap Seal (Axle Set) Grease Cap (Axle Set) Bearing Sets 5505*** 8 Bearing Set - Inner Bearing Set - Outer Brake Shoes Shoe and Lining Kit (Wheel Set) Brake Assembly (N/A) Complete Assembly - L.H. (Replace in Pairs) (N/A) Complete Assembly - R.H. (Replace in Pairs) *Prior to Mid 1987 **After Mid 1987 ***After 1972 ****Prior to May 1977 (N/A) - No Longer Available Hardware (N/A) 1 Actuating Lever - R.H. 5211** 1A Actuating Lever - R.H. (N/A) 1 Actuating Lever - L.H. 5212** 1A Actuating Lever - L.H. (N/A) 2 Magnet Kit 5109** 2A Magnet Kit 5101-HA 2B Magnet Kit-White Wire After Late 1994 (Replace in Pairs) Return Spring Set (Axle Set) Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly) **After Late 1987 (N/A) - No Longer Available Grease Seal & Cap Seal (Axle Set) Grease Cap (Axle Set) Bearing Sets Bearing Set - Inner Bearing Set - Outer Brake Shoes (N/A) 11 Shoe and Lining Kit (Wheel Set) Brake Assembly 5713-HA Complete Assembly - L.H. (Replace in Pairs) 5714-HA Complete Assembly - R.H. (Replace in Pairs) M-11

12 Trailer Brake Replacement Parts Hayes 12 x 2 Centerline Hardware (N/A) 1 Actuating Lever - R.H. (N/A) 1 Actuating Lever - L.H. (N/A) 1 Actuating Lever - R.H. (N/A) 1 Actuating Lever - L.H. (N/A) 2 Magnet Kit (4.5K Axles) (N/A) 2 Magnet Kit (6K & 7K Axles) (N/A) 3 Return Spring Set (Axle Set) Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly) (N/A) - No Longer Available Grease Seal & Cap Seal (Axle Set) Grease Cap (Axle Set) Bearing Sets Bearing Set - Inner Bearing Set - Outer Brake Shoes (N/A) 11 Shoe and Lining Kit (Wheel Set) (4.5K and 6K Axles) (N/A) 11 Shoe and Lining Kit (Wheel Set) (7K Axles) Fayette 10 x 2 1/4 Hardware (N/A) 1 Actuating Lever - R.H. (N/A) 1 Actuating Lever - L.H. (N/A) 2 Magnet Kit Return Spring Set (Axle Set) 5353* 4 Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly) *Contained in Hardware Kit (Axle Kit) ***After 1972 (N/A) - No Longer Available Grease Seal & Cap Seal (Axle Set) Grease Cap (Axle Set) Bearing Sets 5505*** 8 Bearing Set - Inner Bearing Set - Outer Brake Shoes (N/A) 11 Shoe and Lining Kit (Wheel Set) M-12

13 Trailer Brake Replacement Parts / Trailer Brake Assemblies Fayette 12 x 2 Hardware (N/A) 1 Actuating Lever - R.H. (N/A) 1 Actuating Lever - L.H. (N/A) 2 Magnet Kit Return Spring Set (Axle Set) 5353* 4 Hold Down Kit (Axle Set) ,6 Adjusting Screw Kit (Spring & Screw Assembly) *Replacement Kit Uses Coil Springs **Bonded Shoes (N/A) - No Longer Available Grease Seal & Cap Seal (Axle Set) Grease Cap (Axle Set) Bearing Sets Bearing Set - Inner Bearing Set - Outer Brake Shoes 5000-DX** 11 Shoe and Lining Kit (Wheel Set) Electric Trailer Brake Assemblies Units are assembled Assemblies include: Backing Plate, Shoe and Linings, Magnets, Actuating Lever, Adjusting Screw and Spring Hardware. Description x 2 1/4 L.H. Dexter Assembly x 2 1/4 R.H. Dexter Assembly x 2 L.H. Dexter Assembly x 2 R.H. Dexter Assembly 5713-HA 12 x 2 L.H. Hayes Assembly (Replace in Pairs) 5714-HA 12 x 2 R.H. Hayes Assembly (Replace in Pairs) 6709TEK 10 x 2 1/4 L.H. AL-KO Assembly x 2 1/4 R.H. AL-KO Assembly x 2 L.H. AL-KO Assembly x 2 R.H. AL-KO Assembly M-13

14 Trailer Brake Assemblies SELF-ADJUSTING Electric Trailer Brake Assemblies Replaces Dexter Electric Trailer Brake Assemblies Self Adjusting Units are assembled Replace in pairs Assemblies include: Backing Plate, Shoe and Linings, Magnets, Actuating Lever and Spring Hardware x 2 1/4 Right Hand Brake Assembly - Self-Adjusting Boxed x 2 1/4 Left Hand Brake Assembly - Self-Adjusting Boxed x 2 Right Hand Brake Assembly - Self-Adjusting Boxed x 2 Left Hand Brake Assembly - Self-Adjusting Boxed Electric Trailer Brake Assemblies Replaces Dexter Electric Trailer Brake Assemblies Units are assembled Assemblies include: Backing Plate, Shoe and Linings, Magnets, Actuating Lever, Adjusting Screw and Spring Hardware x 2 1/4 Right Hand Brake Assembly Boxed x 2 1/4 Left Hand Brake Assembly Boxed x 2 Right Hand Brake Assembly Boxed x 2 Left Hand Brake Assembly Boxed x 2 1/4 Right Hand Brake Assembly Bulk x 2 1/4 Left Hand Brake Assembly Bulk x 2 Right Hand Brake Assembly Bulk x 2 Left Hand Brake Assembly Bulk Skid Quantities R 12 x 2 Right Hand Brake Assembly 117 per skid L 12 x 2 Left Hand Brake Assembly 117 per skid R 10 x 2-1/4 Right Hand Brake Assembly 156 per skid L 10 x 2-1/4 Left Hand Brake Assembly 156 per skid Brake Assembly Mounting Bolts /8 Brake Assembly Mounting Bolt (Used on 5 bolt mounting patterns) /16 Brake Assembly Mounting Bolt (Used on 4 bolt mounting patterns) M-14

15 Brake Part Reference Guide Brake Assembly x 2 1/4 Dexter (L.H.) Boxed x 2 1/4 Dexter (R.H.) Boxed x 2 Dexter (L.H.) Boxed x 2 Dexter (R.H.) Boxed *5713-HA 12 x 2 Hayes (L.H.) Boxed *5714-HA 12 x 2 Hayes (R.H.) Boxed 6709TEK 10 x 2 1/4 AL-KO (L.H.) Boxed x 2 1/4 AL-KO (R.H.) Boxed x 2 AL-KO (L.H.) Boxed x 2 AL-KO (R.H.) Boxed Brake Assembly Mounting Bolts /8 5 Bolt Mounting Pattern /16 4 Bolt Mounting Pattern Magnet Kit *5101-HA 10 x 1 5/8 Hayes (After late 1994) Boxed 10 x 2 1/4 Hayes (After late 1994) 10 x 2 1/4 Hayes (After late 1994) x 2 1/4 Hayes (Prior to Mid 1987) Boxed 10 x 1 5/8 Hayes (4.5K Axles) (Prior to Mid 1987) x 2 1/4 Dexter Boxed 10 x 2 1/4 Hayes (After Mid 1987) 10 x 1 5/8 Hayes (6K&7K Axles) (After Mid 1987) x 2 Dexter Boxed 12 x 2 Hayes (After Late 1987) x 1 1/2 Dexter (Prior to Mid 1988) Boxed 7 x 1 1/4 Dexter (After April 1990) x 2 Dexter 7K Boxed x 1 1/2 Dexter (After Mid 1988) Boxed x 2 1/4 AL-KO Boxed x 2 Al-KO 6K & 7K Boxed Magnet Retaining Ring (Not Pictured) 5120TEK 10 x 1 5/8 Hayes 10 x 2 1/4 Hayes (Old Style) 12 x 2 Hayes (Old Style) Magnet Retaining Clip (Not Pictured) 5121TEK 10 x 2 1/4 Dexter 12 x 2 Dexter 12 x 2 Dexter 7K 10 x 2 1/4 Hayes (New Style) 12 x 2 Hayes (New Style) Wire Clip (Not Pictured) x 1 1/2 Dexter 10 x 2 1/4 Dexter 12 x 2 Dexter Actuating Lever x 2 1/4 Dexter (R.H.) Boxed x 2 1/4 Dexter (L.H.) Boxed x 2 Hayes (R.H.) (After Late 1987) Boxed x 2 Hayes (L.H.) (After Late 1987) Boxed x 2 Dexter (R.H.) & 12 x 2 Dexter 7K (R.H.) Boxed x 2 Dexter (L.H.) & 12 x 2 Dexter 7K (L.H.) Boxed x 2 1/4 AL-KO (R.H.) Boxed x 2 1/4 AL-KO (L.H.) Boxed x 2 AL-KO (R.H.) Boxed x 2 AL-KO (L.H.) Boxed Grease Cap (Axle Set) x 1 1/4 Dexter 10 x 2 1/4 AL-KO 10 x 1 5/8 Hayes 10 x 1 1/2 Dexter 10 x 2 1/4 Hayes 10 x 2 1/4 Dexter 10 x 2 1/4 Fayette 10 x 2 1/4 Foreman x 2 AL-KO (Small Bore) 12 x 2 Hayes & 12 x 2 Hayes Centerline 12 x 2 Dexter & 12 x 2 Dexter 7K 12 x 2 Fayette 12 x 2 Foreman x 2 AL-KO (Large Bore) Grease Seal (Axle Set) /4 x 1 1/4 Hayes x 1 1/4 Dexter (BTR) x 1 5/8 Hayes 10 x 2 1/4 AL-KO 10 x 2 1/4 Hayes 10 x 2 1/4 Dexter 10 x 2 1/4 Fayette x 2 Hayes & 12 x 2 Hayes Centerline 12 x 2 Fayette 12 x 2 AL-KO* x 2 Dexter (Prior 1997) & 12 x 2 Dexter 7K (Prior 1997) x 1 1/2 Dexter x 2 Dexter (After A Series Only) & 12 x 2 Dexter 7K (After A Series Only) 6604/ x 2 1/4 AL-KO 6605/ x 2 AL-KO* M-15 * (Replace in pairs)

16 Brake Part Reference Guide Shoe and Lining Kits (Wheel Set) 5000-DX 12 x 2 Dexter Boxed 12 x 2 Fayette (Bonded Shoes) 12 x 2 Aimco 12 x 2 Foreman x 1 1/4 Dexter Boxed x 2 1/4 Dexter Boxed x 1 1/2 Dexter Boxed x 2 Dexter 7K Boxed x 2 1/4 AL-KO 10 x 2 1/4 Hayes Boxed x 2 AL-KO Boxed Bearing Set (L44610 Cup L44649 Cone) /4 x 1 1/4 Hayes (In & Out) 7 1/4 x 1 1/4 Foreman (In & Out) 7 x 1 1/4 Dexter BTL (In & Out) 7 x 1 1/4 Dexter BTR (In & Out) 7 1/4 x 1 1/4 Fayette (In & Out) 7 1/4 x 1 1/4 Foreman (In & Out) 10 x 1 5/8 Hayes (Out) 10 x 1 1/2 Dexter (Out) 10 x 2 1/4 AL-KO (Out) 10 x 2 1/4 Hayes (Out) 10 x 2 1/4 Dexter (Out) 10 x 2 1/4 Fayette (Out) 10 x 2 1/4 Foreman (Out) Bearing Set (25520 Cup Cone) x 2 AL-KO (In) 12 x 2 Hayes (In) & 12 x 2 Hayes Centerline (In) 12 x 2 Dexter (In) & 12 x 2 Dexter 7K (In) 12 x 2 Fayette (In) 12 x 2 Foreman (In) 12 x 2 AL-KO (In) 6 & 8 Hole Bearing Set (L68111 Cup L68149 Cone) x 2 1/4 AL-KO (In) 10 x 2 1/4 Fayette (In) (After 1972) 10 x 2 1/4 Hayes (In) (After 1972) 10 x 2 1/4 Dexter (In) (After Dec. 1983) 12 x 2 Foreman (In) 12 x 2 AL-KO (In) 6 & 8 Hole Bearing Set (LM48510 Cup LM48548 Cone) x 2 1/4 Dexter (In) (Prior Dec. 1983) 10 x 2 1/4 Foreman (In) 10 x 2 1/4 Fayette (In) (Prior 1972) Bearing Set (L44610 Cup L44649 Cone) x 1 5/8 Hayes (In) 10 x 1 1/2 Dexter (In) 12 x 2 Hayes (Out) & 12 x 2 Hayes Centerline (Out) 12 x 2 Dexter (Out) 12 x 2 Fayette (Out) 12 x 2 Foreman (Out) Bearing Set (14276 Cup 14125A Cone) x 2 Dexter 6K & 7K 865 Hub (Out) 12 x 2 AL-KO 8 Hole 865 Hub (Out) Bearing Set (15245 Cup Cone) x 2 Dexter 6K & 7K UTG Hub (Out) 12 x 2 AL-KO 6 & 8 Hole (865 Small) Return Spring Set (Axle Set) x 2 1/4 AL-KO 10 x 1 5/8 Hayes 10 x 2 1/4 Hayes (Single Retractor) 10 x 2 1/4 Fayette x 2 1/4 Hayes (Dual Retractor - Prior to May 1977) 10 x 2 1/4 Dexter 10 x 2 1/4 Aimco 10 x 2 1/4 Foreman 12 x 2 Aimco 12 x 2 Dexter (Dual Retractor) & 12 x 2 Dexter 7K 12 x 2 Foreman x 1 1/2 Dexter x 2 AL-KO 12 x 2 Hayes 12 x 2 Dexter (Single Retractor) 12 x 2 Fayette Hardware Kit (Axle Set) x 1 1/4 Dexter Hold Down Kit (Axle Set) x 2 1/4 AL-KO 10 x 2 1/4 Hayes 10 x 2 1/4 Dexter 10 x 2 1/4 Fayette 10 x 2 1/4 Aimco 12 x 2 AL-KO 12 x 2 Hayes & 12 x 2 Hayes Centerline 12 x 2 Dexter & 12 x 2 Dexter 7K 12 x 2 Fayette Adjusting Screw Kit (Spring & Screw Assembly) x 2 1/4 AL-KO 10 x 1 5/8 Hayes 10 x 1 1/2 Dexter 10 x 2 1/4 Hayes 10 x 2 1/4 Dexter 10 x 2 1/4 Fayette 10 x 2 1/4 Aimco 12 x 2 AL-KO 12 x 2 Hayes & 12 x 2 Hayes Centerline 12 x 2 Dexter & 12 x 2 Dexter 7K 12 x 2 Fayette 12 x 2 Aimco 12 x 2 Foreman Adjusting Screw Spring Set (Not Pictured) x 1 5/8 Hayes 10 x 1 1/2 Dexter 10 x 2 1/4 Hayes 10 x 2 1/4 Dexter 10 x 2 1/4 Fayette 10 x 2 1/4 Aimco 12 x 2 Hayes 12 x 2 Dexter 12 x 2 Fayette M-16

17 Magnets / Bearing Sets Reference Guide / Bolts / Nuts 5101-HA White Wires Length 3 1/8 Width 2 Thickness 15/16 Fits or Replaces Hayes 10 x 1 5/8 10 x 2 1/4 12 x 2 (All - Replaces in pairs) (All - After Late 1994) 5105 Red Wires Length 3 1/4 Width 2 3/8 Thickness 7/8 Fits or Replaces Hayes 10 x 2 1/4 (Prior to Mid 1987) Hayes 10 x 1 5/8 (Prior to Mid 1987) Trailer Pac 100 Tow Craft Green Wires Length 3 1/8 Width 2 Thickness 15/16 Fits or Replaces Dexter 10 x 2 1/4 Hayes 10 x 2 1/4 (After Mid 1987) Hayes 10 x 1 5/8 (After Mid 1987) Trailer Pac 102 Tow Craft White Wires Length 3 1/8 Width 2 Thickness 15/16 Fits or Replaces Dexter 12 x 2 Hayes 12 x 2 (After Late 1987) Trailer Pac 103 Tow Craft White Wires Length 2 1/16 Width 1 15/16 Thickness 3/4 Fits or Replaces Dexter 10 x 1 1/2 (Prior to Mid 1988) Dexter 7 x 1 1/4 (After April 1990) 5114 Black Wires Length 3 1/8 Width 2 Thickness 15/16 Fits or Replaces Dexter 12 x 2-7K Axles 5118 Yellow Wires Length 3 1/8 Width 2 Thickness 15/16 Fits or Replaces Dexter 10 x 1 1/2 (After Mid 1988) 6106 Light Green Wires Length 3 1/8 Width 2 Thickness 15/16 Fits or Replaces AL-KO Kober 10 x 2 1/ White Wires Length 3 1/8 Width 2 Thickness 15/16 Fits or Replaces AL-KO Kober 12 x 2 6K & 7K Bearing Sets Cup / Cone A L44610-L LM LM48548 LM LM67048 L68111-L Spindle Nuts Kits - Standard Washer Wheel Nuts Spindle Nuts Kits - D Type Washer Wheel Bolts Spindle Nut Kits Secures brake hardware on spindle axles Spindle Nut Kit - Standard Washer - (1-14 Spindle) Clam Spindle Nut Kit - D Type Washer - (1-14 Spindle) Clam - Wheel Nuts/Bolts Secures wheel to brake drum. 5780TEK 13/16 Wheel Nut - (1/2-20) - Set of 5 Clam Wheel Bolt - (1/2-20) - Set of 5 Clam - M-17

18 Wheel Bearing Kits / Bearing Protectors Wheel Bearing Kits Designed to fit most hubs used on boat, utility, snowmobile, and RV trailers Kit includes 2 bearing cones, 2 bearing cups, grease seal, and cotter pin Spindle Outer Diameter Hub Diameter WB WB / WB138T0700* 1-3/8 x 1-1/ Minimum order quantities may apply. *T applies to tapered axle applications. Bearing protectors Protects wheel bearings from the elements during all trailer operations Automatically maintains the correct internal pressure cannot damage seals Chrome-plated steel construction Sold in pairs and are available in bulk or full color display packages Some models include vinyl cover (see chart) Description Hub Diameter Packaging BPC * Bearing Protector with Covers 1.781" BPC * Bearing Protector with Covers BP232S0604 Bearing Protector BP244S0604 Bearing Protector BP198S0304 Bearing Protector 1.980" Bulk BP232S0304 Bearing Protector 2.328" Bulk BP244S0304 Bearing Protector 2.441" Bulk BB * Bearing Protector Cover 1.781" Display Card, 2 per BB Bearing Protector Cover Display Card, 2 per BB Bearing Protector Cover and Display Card, 2 per BB Bearing Protector Cover 1.980" Bulk BB Bearing Protector Cover 2.328" and Bulk 2.441" Bearing Protector 2 Bulk Minimum order quantities may apply. *Bulk versions also available. Contact your sales representative. M-18

19 Grease Caps 1600 Series 1500 Series Dimensional Information A = Flange Diameter (OD) B = Crown Height C = Flange Length D = Overall Height B D B D Grease caps 1500 Series Packaging Bulk Mat. Gauge C C A A 1500 Series 1600 Series Measurements (See Diagram) A B C D Weight / 100 Pcs * lbs * lbs * lbs lbs lbs lbs * lbs * lbs lbs * lbs * lbs * lbs * lbs lbs * lbs lbs lbs. M Series Packaging Bulk Mat. Gauge Measurements (See Diagram) A B C D Weight / 100 Pcs lbs * lbs lbs lbs lbs lbs lbs lbs lbs lbs. All shown standards. *Zinc-plated for corrosion resistance. Minimum order quantities may apply.

20 Plastic Fenders Plastic Fenders High density polyethylene (HDPE) fenders Injection molded Corrosion proof Impact resistant, 300 lb. capacity Molded-in color is scratch proof Built-in fender skirt Optional integral step pad Handles temperature extremes Mounting slots Dimensional Information Note: Lights not included. C Style A no steps E D A 2.5" 1" A M3 M4 M2 M1 Mounting Bracket Slot B B E D F D F D C C M4 A M3 C Style C featuring a step on top A Style B featuring a step on top Style D featuring a step on top and both sides Plastic Fenders Style A Bulk White Bulk Black Bulk Silver Measurements (See Diagram) Tire Size A B C D E F M (1) M (2) M (3) M (4) * * Style B Bulk White Bulk Black Bulk Silver Measurements (See Diagram) Tire Size A B C D E F M (1) M (2) M (3) M (4) /4 Style C Bulk White Bulk Black Bulk Silver Measurements (See Diagram) Tire Size A B C D E F M (1) M (2) M (3) M (4) * * /4 Style D (US Patent D385, 512) Bulk White Bulk Black Bulk Silver Measurements (See Diagram) Tire Size A B C D E F M (1) M (2) M (3) M (4) / ** / / ** / / ** / /4 * Minimum order quantities may apply. ** With UPC label. Unit Wt. Lbs. Unit Wt. Lbs. Unit Wt. Lbs. Unit Wt. Lbs. M-20

21 Hindsight Camera System Hindsight Camera System Application use is completely wireless Night Vision Wide 55 viewing Viewing distance over 300 feet without obstruction (actual transmission distance may be reduced by certain obstructions) Full color portable 2.4 LCD monitor with 480 x 240 resolution 4 Channel monitor allows for multiple cameras Instant reverse image of monitor viewing Microphone built into camera Quick rechargeable lithium-ion batteries Complies to FCC regulation HindSight Single Back-Up Camera System w/magnetic Base Clam - Tow Ready Accessory Parts HindSight Single Back-Up Camera, Channel 2 Boxed HindSight Single Back-Up Camera, Channel 3 Boxed HindSight Single Back-Up Camera, Channel 4 Boxed M-21

22 Tire Chocks / TRAILER ALIGNMENT Tire Chock & Tongue Jack Caster & Wheel Dock Combo Complete trailer docking system Made from high impact polymer Mounting holes provided to secure to solid surface Reduces the risk of trailer roll Fits most trailer wheels Description Tire Chock & Tongue Jack Caster Wheel Dock Combo Wheel Chock Made from high impact polymer Reduces the risk of trailer roll Fits most trailer wheels Description Wheel Chock hitch & trailer alignment tool Convenient one person hitch alignment system Magnetic base for fast and easy location Telescoping rods adjust up to 42 Easy to use the first time Description Hitch & Trailer Alignment Tool M-22

23 Safety Chains CHA CHA Safety Chains Safety chains are required by law in most states Cross chains when towing for added safety All chains conform to J SAE standards CHA CHA Grade Size Hook Finish Capacity Description Packaging CHA /4 x 24" 7/16" Safety Hook Clear Zinc 5,000 lbs. Proof coil chain. 1/4 chain interior dimension is sized so a 1/2 bolt shankcan pass through. (2-pack) CHA /4 x 24" 7/16" Safety Hook Clear Zinc 5,000 lbs. Proof coil chain. 1/4 chain interior dimension is sized so a 1/2 bolt shankcan pass through. Bulk CHA /4" x 36" 1/4" Forged Clevis Hook Yellow Zinc 12,600 lbs. Transport chain. 1/4 chain interior dimension is sized so a 1/2 bolt shank can pass through. Bulk CHA /4 x 24" 7/16" Safety Hook Clear Zinc 7,800 lbs. Test chain. 1/4 chain interior dimension is sized so a 1/2 bolt shank can pass through. (2-pack) CHA /4 x 24" 7/16" Safety Hook Clear Zinc 7,800 lbs. Test chain. 1/4 chain interior dimension is sized so a 1/2 bolt shank can pass through. Bulk CHA /16" x 36" 5/16" Forged Clevis Yellow Zinc 18,800 lbs. Transport chain. Bulk Hook CHA /16" x 42" 5/16" Forged Clevis Hook Yellow Zinc 18,800 lbs. Transport chain. Bulk CHA /8" x 36" 3/8" Forged Clevis Hook Yellow Zinc 26,400 lbs. Transport chain. Bulk CHA /2" x 42" 1/2" Forged Clevis Hook Yellow Zinc 45,200 lbs. Transport chain. Bulk safety chain KIT Max GTW Description ,000 6 Class I - S-Hooks on Both Ends (1pc) ,000 6 Class III - Quick Links on Both Ends (1pc) safety chain KIT (bulk packaged) Max GTW Description ,500 6 Class II Proof Coil Chain , Class III - Straight Link Machine Chain class i-iii chain with s-hook, one end Description Class II GVWR 3,500 lbs. 24, 1/4 Proof Coil Grade 30, with S-Hook at One End (836) Class III GVWR 5,000 Lbs. 30, 1/4 Proof Coil Grade 30, with S-Hook aat One End (839) class i-iii safety chain with s-hook, both ends Description Class I GVWR 2,000 Lbs. 48, 3/16 Proof Coil Grade 30, S-Hook, Both Ends (835) Class III GVWR 5,000 Lbs. 48, 1/4 Proof Coil Grade 30, S-Hook, Both Ends (839) class iii safety chain with quick links Description Class III 30 with Quick Links, Heavy Duty Safety Chain Kit for Tow Bars (5,000 lbs. GTW) class iv safety chain with clevis hook Description Class IV 32, 5/16 Proof Coil Grade 30 5/16 Clevis Slip Hook, One End (7,600 lbs. GVW) Class IV 36, 1/2 proof Coil Grade 30 3/8 Clevis Slip Hook, One End (10,600 lbs. GVW) Class IV 35, 3/8 High Test 43 Clevis Slip & Latch Hook (16,200 lbs. GVW) M-23

24 D-Rings / Tow Hooks / chain accessories forged d-rings, forged lashing rings & brackets Work Max Descripition Load (lbs.) Load (lbs.) Forged D Ring Yellow Zinc, 1/2 Forged D-Ring with 4,000 12,000 Mounting Bracket, Measures 2-1/2 X 2-3/8 ID Forged Lashing Ring 18,000 lbs. 3/8 C1045 Material 6,000 18,000 5/8 Forged D-Ring with Weld Mounting Bracket Forged Lashing Ring 26,500 lbs. 3/8 Thick, C1045 8,833 26,500 Material 3/4 Forged D-Ring with Weld Mounting Bracket Forged D-Ring with Weld On Mounting Bracket, 3/8 15,587 46,760 Thick x5x6 Forged Lashing Ring 46,760 lbs. C1045 Material 15,587 46,760 5/8 Forged D-Ring with Weld Mounting Bracket Recessed Rope Ring for 3/8 Plywood 400 1, Rope Ring, Zinc 10 gauge 400 1, Recessed Rope Ring & Trim Ring Zinc 16 gauge Steel for 333 1,000 1/4 Plywood Replacement Plastic Trim for # Recessed Floor/Wall Tie Downs 1/8 Plate Steel 1,667 5,000 tow hooks (bulk packaged) Description Max. GTW (lbs.) Tow Hook with Mounting Bolts (Chrome) 10, Tow Hook with Mounting Bolts (Black) 10, JC s-hooks/j-clip for trailer safety chain Description S-hook for Trailer Safety Chain, Class I, Break Strength 2,000 lbs S-hook for Trailer Safety Chain, Class II/III, Break Strength 5,000 lbs S-hook for Trailer Safety Chain, Class IV, Break Strength 7,600 lbs. JC J-Clip for Safety Chain quick links (bulk packaged) Use to connect safety chains to tow vehicle or trailer Max GTW Description , Quick Link, Fits 3 16 or 1 4 Chain , Quick Link, Fits 5 16 Chain , Quick Link , Quick Link , Quick Link ,000 7/16 Quick Link , Quick Link , Quick Link, Fits 3 16 or 1 4 Chain - Packaged , Quick Link, Fits 5 16 Chain - Packaged clevis slip hooks w/ latch for trailer safety chain Description Grade 43, Clevis Slip with Latch, 1/ Grade 43, Clevis Slip with Latch, 5/ Grade 43, Clevis Slip with Latch, 3/ Grade 43, Clevis Slip with Latch, 1/ Grade 70, Clevis Hook with Latch, 1/ Grade 70, Clevis Hook with Latch, 5/ Grade 70, Clevis Hook with Latch, 3/8 M-24

25 Spare Tire Carriers Spare Tire Carrier Fits most 4, 5 and 6 lug wheels - up to 16-1/2" Provides 4-3/4" lift and over 7" of offset to mount tire up and out of the way Zinc-plated to resist corrosion Easy bolt-on installation, no cutting or drilling required Fits trailer tongue up to 3" wide by 5" high All mounting hardware and instructions included HDSTC 0101 Spare tire carrier Bulk HI-MOUNT SPARE TIRE CARRIER Heavy-duty, welded and reinforced steel plate construction Zinc-plated to resist corrosion Adjustable bolt circle to fit both 4 and 5 lug wheels Fits all trailer tongues up to 3" wide by 4" high Includes zinc-plated mounting hardware and instructions Security locking hole to lock wheel and bracket to trailer using a security cable and lock (cable and lock sold separately). STC Hi-mount spare tire carrier Ind. Box STC Hi-mount spare tire carrier Bulk ETC Economy Spare Tire Carrier Fits 8", 9", 12", 13", 14", and 15" wheels with 4 or 5 lug rims Easy to install Includes lug nuts to secure wheel to frame Heavy-duty 1/2" diameter construction Zinc-plated to resist corrosion ETCHL ETCLB ETC 0101 Economy spare tire carrier Ind. Box ETCLB 0201 Economy spare tire carrier with locking levers Bulk ETCLB 0700 Economy spare tire carrier with locking levers ETCHL 0700 Economy spare tire carrier with locking levers and HLO lock M Economy etc & Spare Tire Lock Tested tough Theft-resistant locking cap Fits over wheel studs (up to 9/16" diameter) to deter spare tire theft Removable plug allows longer wheel studs to protrude through cap Locking tab provides positive locking feature to prevent lock from turning ETCSTL0701 Economy spare tire carrier with STL spare tire lock pickup tire carrier (inside bed) Coated with epoxy, electro-static paint that is highly resistant to impact or scratches Padlock feature secures the wheel against theft (padlock not included) Black powder coat finish Description 1240 Universal Application for Domestic Pickups Can be used with 14 through 16.5 wheel sizes with 7 maximum rim width. Will not fit imports and some models of small pickups.

26 BOAT GUIDES / MARINE GRADE CARPETING Boat Guides Boat guides help you visually guide your boat onto your trailer. High-strength super gripper mounting brackets attach firmly above and below the trailer frame. Easy bolt-on mounting fits trailer frames up to 3 x 5 high. Adjustable to provide optimum fit to any hull design. Description Upright Height GB Non-marring, marine grade PVC tubing 44" GB Non-marring, marine grade PVC tubing 50" BGR Galva-Tec finish, steel construction with non-marring, cushioned rollers 20" BGR20 GB150 GB44 Marine Grade Carpeting Marine Grade carpeting allows the do-it-yourselfer to replace worn and dirty carpet on bunk trailers. The carpet protects your boat investment by reducing scratching on the hull and keeps it in like-new condition. Individual rolls are shrink-wrapped for shelf display. Description CR8008 Bunk carpeting, Black, 8" x 144" CR8012 Bunk carpeting, Black, 12" x 144" Replacement Bunk Carpeting M-26

27 WaterWick / Assist Bars Absorbs moisture from the air Helps control mold and mildew Contains 1.65 lbs/750 grams of Calcium Chloride (salt), that can absorb up to 1/4 gallon of moisture 32" long (with hook extended), 1.88 lbs. Designed for use in RVs, Trailers, Boats WaterWick in Shower Description WaterWick US Patent B1 waterwick Working concept WaterWick in Closet waterwick Recommended usage Square Feet Humidity # of Units Up to 30 Low 1-2 High 2-3 Over 30 Low 2-3 High 3-4 General guidelines only. Number of units needed may vary depending on your specific needs. NOTE: Contains Calcium Chlorie (salt). Possible adverse effects in case of contacet with eyes. Please read caution on instructions sheet. Assist Bars Zinc die cast assist bar with chrome plating or black powder coat and textured finish. Requires counter sunk screws. 10 X 7/8 X 1 5/8 Mounting holes on 9 centers. Description Assist Bar, Chrome M-27

28 Notes M-28