Conceptual Design Presenta2on. ME 4182 Team: Guys Engineering Nathan Besse*e, Rahul Bha/a, Andrew Cass, Zeeshan Saiyed, Glen Stewart YJ Chok
|
|
- Garey Preston
- 5 years ago
- Views:
Transcription
1 Conceptual Design Presenta2on ME 4182 Team: Guys Engineering Nathan Besse*e, Rahul Bha/a, Andrew Cass, Zeeshan Saiyed, Glen Stewart YJ Chok
2 Automa/c White Board Wiper Last Time Presented Revisions to previous deliverables Patent research for related systems Received review of patent presenta/on Needed to point out cri/cal components of patent images
3 Revision Example
4 Automa/c White Board Wiper This Week Conceptual design presenta/on Descrip/ve name Brief descrip/on Descrip/ve sketch Advantages and disadvantages
5 Buffer Automa/c Dry Erase Board U/lizes lead screw to drive a circular buffer ver/cally. Worm gear a*ached to buffer and driven by lead screw provides rota/onal cleaning. Horizontal movement by rack and pinion with moving gear and motor with sta/onary chain.
6 Buffer Automa/c Dry Erase Board Advantages: Horizontal, ver/cal, and rota/onal cleaning ac/on. Allows for marker tray to stay in place. Disadvantages: 2 motors Expensive Intrusive No movement away from board Points of Interest: One motor provides rota/onal and ver/cal cleaning Rack and pinion horizontal drive
7 Simple Linear Felt Wiper Ver/cal slide wiper system Wheels and tracks to hang and propel Motor on the wiper Side ramps to ease eraser on and off board Stop bu*ons to return wiper to start posi/on
8 Simple Linear Felt Wiper Pros Simple design using inexpensive springs to apply pressure Single motor for horizontal movement Replaceable felt wiper Simple stops reduce reliance on controller Cons No automated movement away from board Power cable management required Side ramp required to ensure wiper slides on and off white board
9 Simple Linear Felt Wiper Points of interest Cap at top can be removed to replace felt wiper Wiper face held back using simple metal clasp Wiper slides up to remove Three wheel system drives wiper horizontally Grip material on larger wheels for no slip
10 Automa/c Whiteboard Eraser Uses two separate motors A wheel is a*ached to one motor to drive the assembly on the track The other motor is used to rotate the eraser
11 Automa/c Whiteboard Eraser Advantages: The rota/ng eraser ensures more surface area to clean the board Rela/vely easy arrangement Disadvantages: 2 motors Expensive No movement away from board Points of Interest: One motor provides rota/onal cleaning The surface of the track and the drive wheel should have enough fric/on to overcome any slip condi/ons
12 Solenoid Controlled Device
13 Solenoid Controlled Device Features: Uses solenoids to draw erasers to board Screws on backs of erasers allow for fine adjustment of distance from board Uses U Grooved wheels on rail driven by a string pulley system Advantages: Disengagement from the board allows for more control over erasing Allows for marker tray to stay in place. Disadvantages: Possibly expensive Difficult to create controls Moving wires for solenoids
14 Hinged Chain Drive Felt Whiteboard Wiper This particular design concept utilizes a felt wiper mounted on a circular shaft fixed to the end plates for the eraser mechanism along with a double spring hinge at top and bottom for the mount. The AC-powered controller will drive a window motor propelling a chain around pulleys, similar to a bicycle, with hooks attached and will return to position to the left of the board real estate. (+) Simple Cheap Conserves Board Real Estate Easy eraser replacement (-) Requires maintenance Power not as convenient Motor may be noisy Spring hinge wear Specialized pulleys (!) Implementation allows for marker tray Rigid mounting reduces pressure requirement
15 Wiper Blade Board Erasing System - Driven horizontally along parallel, wall mounted rails using electric motor driven wheels - Felt lined wiper blade like structures sweep across the board erasing marking in a horizontal motion - Wiper blades can be lifted off the surface of the whiteboard using hinges and actuators
16 Wiper Blade Board Erasing System Advantages: - Slim, low profile design - Allows board to be selectively cleared Disadvantages: -2 motors, 2 actuators, 8 wheels (many parts) - May be hard to fit in budget Points of Interest: - Wheels provide drive and clamping force along rails - Blades can be easily fitted with new cleaning media
17 Automa/c White Board Wiper Next Week Mid Term Presenta/ons Present progress so far Simple mockup or prop needed for demonstra/on of the best conceptual design
Engineering Analysis. Team: 5 Guys Engineering + 1 Nathan Bessette, Rahul Bhatia, Andrew Cass, Glen Stewart
Engineering Analysis Presentation ME 4182 Team: 5 Guys Engineering + 1 Nathan Bessette, Rahul Bhatia, Andrew Cass, Zeeshan Saiyed, Glen Stewart YJ JChok Automatic Whiteboard Wiper Last Time Last Time Layout
More informationProduct design: Mechanical systems
Product design: Mechanical systems Recall Mechanisms can: change direction of movement, e.g. from clockwise to anticlockwise or from horizontal to vertical; change type of movement, e.g. from rotating
More informationMoon Transmission Systems. Def: System has one type of movement rotaon
Moon Transmission Systems Def: System has one type of movement rotaon Made up of: Driver: Iniates the moon Driven: Receives the moon Intermediate: Found between driver and driven Driver component Driven
More informationSuperQuest Salem Arms Best Practices
SuperQuest Salem Arms Best Practices VEX Arm Designs Single 4-Bar 6-Bar 8-Bar Linear Slide Scissor Double Reverse 4-Bar Single Arms Arms These manipulators consist of a pivot point and at least 1 motor.
More informationWhat is a Mechanism?
Mechanisms What is a Mechanism? A mechanism is the part of a machine which contains two or more pieces arranged so that the motion of one compels the motion of the others. Generally used to: Change the
More informationTransmission systems: Multiple components that have the same type of movement (rotational, linear, etc)
Transmission systems: Multiple components that have the same type of movement (rotational, linear, etc) Transformation systems: Different components in the system have different types of movement Ex: rotational
More informationChanges in direction.! Using pulleys with belts
Mechanisms Changes in direction! Using pulleys with belts Changes in direction! Using friction wheels Changes in direction! Using gears Worm drive! Reduces the speed! It is non-reversible Worm drive! Multiple
More informationMechanisms. Prepared by Juan Blázquez, Alissa Gildemann
Unit 9 Mechanisms 1. Mechanisms Mechanisms are devices that transmit and convert forces and motions from an input to an output element. They enable us to use less effort to carry out a task. We can classify
More informationSpur Gears. Helical Gears. Bevel Gears. Worm Gears
Spur s General: Spur gears are the most commonly used gear type. They are characterized by teeth which are perpendicular to the face of the gear. Spur gears are by far the most commonly available, and
More informationDriver Driven. InputSpeed. Gears
Gears Gears are toothed wheels designed to transmit rotary motion and power from one part of a mechanism to another. They are fitted to shafts with special devices called keys (or splines) that ensure
More informationMoments. It doesn t fall because of the presence of a counter balance weight on the right-hand side. The boom is therefore balanced.
Moments The crane in the image below looks unstable, as though it should topple over. There appears to be too much of the boom on the left-hand side of the tower. It doesn t fall because of the presence
More informationLoad Effort. Work = (Force)Distance = (F)d. Mechanical Advantage = R E MA = 12/20/11
Transfer kine+c energy (the energy of mo+on) educe the effort needed to move a load Change the direc+on or amount of mo+on Change the type of mo+on (rotary to straight line) () the input force ither the
More informationSteady Rests Ordering Guide
2016 Self-Centering Steady Rests Steady Rests Ordering Guide LMCworkholding.com Workholding s First Call 1 CONTENTS Steady Rest Ordering Guide...3 Ordering Information...4 Mount style...5 Adapter for Existing
More informationTransmissions. Pat Willoughby Wednesday Section 2/16/2005
Transmissions Pat Willoughby Wednesday Section /6/005 Strategies -> Concepts -> Modules Strategies (What are you going to do?) Basic movements on table, how you will score Analysis of times to move, physics
More informationMECHANISMS. AUTHORS: Santiago Camblor y Pablo Rivas INDEX
MECHANISMS AUTHORS: Santiago Camblor y Pablo Rivas INDEX 1 INTRODUCTION 2 LEVER 3 PULLEYS 4 BELT AND PULLEY SYSTEM 5 GEARS 6 GEARS WITH CHAIN 7 WORM GEAR 8 RACK AND PINION 9 SCREW AND NUT 10 CAM 11 ECCENTRIC
More informationGraphical representation of a gear
Homework 4 Gears Gears are designed to transmit rotary motion. Often they are arranged in a gear train (meshed together). Gear trains provide a change in speed, torque (turning force) and direction (clockwise
More informationIf the windlass has a diameter of 300mm, calculate the torque produced by the load. (Show all working and units.)
8. A winch system used to raise a 5N load is shown. (a) If the windlass has a diameter of mm, calculate the torque produced by the load. (Show all working and units.) T = r = 5 5 = 875Nmm = 8. 75Nm substitution
More informationAll levers are one of three types, usually called classes. The class of a lever depends on the relative position of the load, effort and fulcrum:
Página 66 de 232 Mechanisms A mechanism is simply a device which takes an input motion and force, and outputs a different motion and force. The point of a mechanism is to make the job easier to do. The
More informationCHAPTER 6 GEARS CHAPTER LEARNING OBJECTIVES
CHAPTER 6 GEARS CHAPTER LEARNING OBJECTIVES Upon completion of this chapter, you should be able to do the following: Compare the types of gears and their advantages. Did you ever take a clock apart to
More informationMAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
More informationINDEX. PAGE Adjustment mechanism for radial position of block on rotating
INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,
More informationRobotic Systems ECE 401RB Fall 2006
The following notes are from: Robotic Systems ECE 401RB Fall 2006 Lecture 8: Actuators Part 2 Chapter 19, G. McComb, and M. Predko, Robot Builder's Bonanza, Third Edition, Mc- Graw Hill, 2006. I. Gears
More informationRE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles
RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class
More informationRAT PACK RAT TREADMILL COLIN BURKHALTER, STU SATER, STEPHEN SCHOONEN, MITCHELL WILLIAMS
RAT PACK RAT TREADMILL COLIN BURKHALTER, STU SATER, STEPHEN SCHOONEN, MITCHELL WILLIAMS INTRODUCTION/BACKGROUND Project Objective: To redesign and fabricate an improved neonatal rat research treadmill
More informationXL HYDROSTATIC TRANSAXLES
Purging Procedures Due the effects air has on efficiency in hydrostatic drive applications, it is critical that it be purged from the system. These purge procedures should be implemented any time a hydrostatic
More informationTECHNOLOGY MECHANISMS
TECHNOLOGY MECHANISMS 3º ESO IES CHAN DO MONTE URTAZA 1 WHAT IS A MECHANISM? Mechanism are devices that have been designed to make jobs easier. They all have certain things in common: They involve some
More informationFoundations of Physical Science. Unit 2: Work and Energy
Foundations of Physical Science Unit 2: Work and Energy Chapter 4: Machines and Mechanical Systems 4.1 Force and Machines 4.2 The Lever 4.3 Designing Gear Machines Learning Goals Describe and explain a
More informationPARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes a
PARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes 50 24 24 24 24 38 1a Perforated Strip 19 holes 12 6 6 6 6 16 1b Perforated
More informationAUTOMATIC CLOSING WINDOW
MECHANICAL ENGINEERING DEPARTMENT AUTOMATIC CLOSING WINDOW ASSESSMENT III- GRADUATION PROJECT Advisor: Dr. Emad Y. Tanbour Mohd. Abdul Mohsin Khan Mohd. Al- Ghamdi Nemer Saab Contents Introduction Problem
More informationSCRAP COLLECTING VEHICLE
SCRAP COLLECTING VEHICLE Sunil Rathava 1, Gaurang Raval 2, Akshay Solanki 3, Shambhu Rai 4 1 Student, mechanical, V.I.E.R., Gujarat, INDIA 2 Student, mechanical, V.I.E.R., Gujarat, INDIA 3 Student, mechanical,
More informationDemag DCS-Pro chain hoist Demag DCMS-Pro Manulift. With infinitely variable speed control
Demag DCS-Pro chain hoist Demag DCMS-Pro Manulift With infinitely variable speed control Infinitely variable speed control for even faster and more precise handling Demag chain hoists with infinitely variable
More informationSimple Machines. The six simple machines are: Lever Wheel and Axle Pulley Inclined Plane Wedge Screw
Simple Machines 1 Simple Machines Ancient people invented simple machines that would help them overcome resistive forces and allow them to do the desired work against those forces. 2 Simple Machines The
More informationLEGO Education WeDo 2.0 Toolbox
LEGO Education WeDo 2.0 Toolbox WeDo 2.0 Table of Contents Program with WeDo 2.0 3-21 Build with WeDo 2.0 22-36 Program with WeDo 2.0 Programming is an important part of twenty-first century learning,
More informationBAE 4012 Senior Design Fall 2016
BAE 4012 Senior Design Fall 2016 Trot n Trailer Senior Design Konner Kay - Team Leader James Collingsworth Skyler Shepherd Colten Leach Trey Minten Project Outline Introduction: (1-5) Problem Outlook:
More informationIntroducing Galil's New H-Bot Firmware
March-16 Introducing Galil's New H-Bot Firmware There are many applications that require movement in planar space, or movement along two perpendicular axes. This two dimensional system can be fitted with
More informationMECHANISM: TRANSMISSION THE TYPE OF INPUT MOVEMENT IS THE SAME AS THE OUTPUT TRANSFORMATION THE MECHANISM TRANSFORMS THE TYPE OF MOVEMENT
MECHANISM: The mechanisms are elements intended to transmit and transform forces and movements from an INPUT element (motor) to an OUTPUT element. Types of movements: Rotary Motion -this is motion in a
More informationMarine Engineering Exam Resource Review of Couplings
1. What are rigid couplings used for? Used to join drive shafts together. True alignment and rigidity are required. Example Drive shafts and production lines, bridge cranes, solid shaft that needs to be
More informationMechanics and Mechanisms. What is do you think about when you hear the word mechanics? Mechanics. Is this a mechanism? 2/17/2011
Mechanics and Mechanisms What is do you think about when you hear the word mechanics? Mechanics Mechanics is the study of how things move Is this a mechanism? Concerned with creating useful movement through
More informationUnited States Patent (19) Smith
United States Patent (19) Smith 11 Patent Number: 45) Date of Patent: 4,546,754 Oct. 15, 1985 (54) YOKE ANCHOR FOR COMPOUND BOWS (75) Inventor: Max D. Smith, Evansville, Ind. 73 Assignee: Indian Industries,
More informationMechanism Feasibility Design Task
Mechanism Feasibility Design Task Dr. James Gopsill 1 Contents 1. Last Week 2. Types of Gear 3. Gear Definitions 4. Gear Forces 5. Multi-Stage Gearbox Example 6. Gearbox Design Report Section 7. This Weeks
More informationElectronic Shifter. Lee Redstone V Lewis Weston V Jason Deglint V Group #5. Supervisor Ashoka K. S. Bhat. Due Oct.
Electronic Shifter Lee Redstone V00662175 Lewis Weston V00766616 Jason Deglint V00730963 Group #5 Supervisor Ashoka K. S. Bhat Due Oct. 16, 2012 Dept. Electrical and Computer Engineering University of
More informationCable Car. Category: Physics: Balance & Center of Mass, Electricity and Magnetism, Force and Motion. Type: Make & Take.
Cable Car Category: Physics: Balance & Center of Mass, Electricity and Magnetism, Force and Motion Type: Make & Take Rough Parts List: 1 Paperclip, large 2 Paperclips, small 1 Wood stick, 1 x 2 x 6 4 Electrical
More informationC14.12 WINDOW STAYS C14 SIDE HUNG WINDOWS
C14 SIDE HUNG WINDOWS 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Window stays series 681-.. and n 684-12....03
More informationCHASSIS & HOOD F L Ihr Ersatzteilspezialist im Internet
MODEL 000x0A CHASSIS & HOOD 0 0 MODEL 000x0A CHASSIS & HOOD 0 Seat E Hood 0x Washer 0 Bolt, Wing 00x Bolt, Carriage E0 Bracket, Hinge 00x Bolt, Shoulder 00x Bolt, Shoulder Rod, Battery 0x Nut, Flange E0
More informationProduct Overview. Hansen Precision Electric Motors DC AC DC. Actuators. Stepper
AC Hansen Precision Electric Motors Hansen s quality products are known around the world. These include: Synchron Motors, available with custom voltage, speed and power, durable brush motors, AC clock
More informationHarnessing Wind Energy with Recyclable Materials By Katherine Carroll, Margo Dufek, Leanne Willey, and Andrew McCarthy Team 03
Harnessing Wind Energy with Recyclable Materials By Katherine Carroll, Margo Dufek, Leanne Willey, and Andrew McCarthy Team 03 Midpoint Review Document Submitted towards partial fulfillment of the requirements
More information(POWER TRANSMISSION Methods)
UNIT-5 (POWER TRANSMISSION Methods) It is a method by which you can transfer cyclic motion from one place to another or one pulley to another pulley. The ways by which we can transfer cyclic motion are:-
More informationRadnoti Modular Wire Myograph System Assembly and Basic Principles
Radnoti Modular Wire Myograph System Assembly and Basic Principles www.radnoti.com info@radnoti.com Copyright 2017 v. 17 List of Components for the M1000 The Radnoti M1000 is the start of the Wire Myograph
More informationMechanical engineering
REVIEW 13 ANSWER KEY Mechanical engineering Checkup 1 WHAT IS MECHANICAL ENGINEERING? (p. 426) 1. Name the branch of science and technology that focuses specifically on the study of technical objects with
More informationDifferent types of gears. Spur gears. Idler gears. Worm gears. Bevel gears. Belts & Pulleys
GEARS Robot Gears By using different gear diameters, you can exchange between rotational (or translation) velocity and torque. by looking at the motor datasheet you can determine the output velocity and
More informationKINEMATICS OF MACHINARY UBMC302 QUESTION BANK UNIT-I BASICS OF MECHANISMS PART-A
KINEMATICS OF MACHINARY UBMC302 QUESTION BANK UNIT-I BASICS OF MECHANISMS PART-A 1. Define the term Kinematic link. 2. Classify kinematic links. 3. What is Mechanism? 4. Define the terms Kinematic pair.
More informationMid-Engine Rider. Parts Manual Model Revision 00 TP LT-L
Mid-Engine Rider Parts Manual Model 7800337 1741802 Revision 00 Rev. Date 05/2008 Table Of Contents PRODUCT COMPONENTS PAGES Steering... 4 Motion Drive... 6 Electrical System... 10 Chassis & Hood... 12
More informationMore than a Pipe Buggy!
TM More than a Pipe Buggy! Transport 20 ft (6.1 m) pipe lengths up to 1,000 Lb. (450 Kg) Comes with ratchet hold-down strap and 16" tubed or flat free tires. Weighs only 70 Lb (31.8 Kg) can be shipped
More informationSolar Boat Capstone Group
Solar Boat Capstone Group Design Team Chris Maccia, Jeff Tyler, Matt Knight, Carla Pettit, Dan Sheridan Design Advisor Prof. M. Taslim Abstract Every year Solar Splash, the IEEE World Championship of intercollegiate
More informationDESIGNING DRIVES FOR A COMPETITIVE EDGE
DESIGNING DRIVES FOR A COMPETITIVE EDGE GET MORE FROM YOUR INDUSTRIAL BELT DRIVES A field redesign results in unprecedented performance INTRODUCTION If you re an electromechanical engineer who designs
More informationTAKE IT TO THE NEXEN LEVEL
TAKE IT TO THE NEXEN LEVEL INDUSTRIES SERVED Aerospace Automation Equipment Automotive Bottling CNC Machining Commercial Laundry Equipment Converting Conveying Food Processing Machine Tool Material Handling
More informationProduct Line Glossary Terms
PURPOSE This document defines terminology used across all of Harrington s Product Lines. SCOPE These definitions will include the following Product Lines: Manual Electric Air Wire Rope Cranes BACKGROUND
More informationChapter 8 Kinematics of Gears
Chapter 8 Kinematics of Gears Gears! Gears are most often used in transmissions to convert an electric motor s high speed and low torque to a shaft s requirements for low speed high torque: Speed is easy
More informationEngineering Design Process for BEST Robotics JANNE ACKERMAN COLLIN COUNTY (COCO) BEST & BEST OF TEXAS ROBOTICS
Engineering Design Process for BEST Robotics JANNE ACKERMAN COLLIN COUNTY (COCO) BEST & BEST OF TEXAS ROBOTICS Agenda Getting Started Lessons Learned Design Process Engineering Mechanics 2 Save Time Complete
More informationSafety Presenta,on JNC1224 Jump Starter
Safety Presenta,on JNC1224 Jump Starter SAFETY: OPERATOR TRAINING People typically underes,mate the dangers associated with jump star,ng and oien neglect to provide proper training for operators. Operator
More informationDesign and Fabrication of Sequencing Circuit with Single Double Acting Cylinder
Design and Fabrication of Sequencing Circuit with Single Double Acting Cylinder V.G.Vijaya Department of Mechatronics Engineering, Bharath University, Chennai 600073, India ABSTRACT: This project deals
More informationROLL COATER MACHINES Which Option & Why. David Brown Technology Manager. Bronx International Pty Ltd
ROLL COATER MACHINES Which Option & Why David Brown Technology Manager Bronx International Pty Ltd Roll Coater Machines are the Heart of the painting process on Continuous Coil Paint Lines. The Roll Coater
More informationSoftride Trunkster Rack
Softride Trunkster Rack Softride, Inc. P.O. Box 9709 Bellingham, WA 98227 USA Toll-free: 1.888.258.7286 Direct: 1.360.647.7420 Fax: 1.360.647.1884 info@softride.com www.softride.com KEEP THESE INSTRUCTIONS
More informationADD 20% FOR 60 DIVERTER VALVES
45 Y-TYPE DIVERTER VALVES 45 Y TYPE DIVERTER VALVES ARE MANUFACTURED WITH REMOVABLE ACCESS COVERS FOR INSPECTION LINING PACKAGE IS FOR VALVE ONLY AND DOES NOT INCLUDE SQUARE TO ROUND TRANSITION LINING.
More informationUNIT -I. Ans: They are specified by the no. of strands & the no. of wires in each strand.
VETRI VINAYAHA COLLEGE OF ENGINEERING AND TECHNOLOGY, THOTTIAM, NAMAKKAL-621215. DEPARTMENT OF MECHANICAL ENGINEERING SIXTH SEMESTER / III YEAR ME6601 DESIGN OF TRANSMISSION SYSTEM (Regulation-2013) UNIT
More informationChain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
More informationLINEAR SLIDES RECISION NDUSTRIAL OMPONENTS DESIGN. Phone: FAX:
R RECISION NDUSTRIAL OMPONENTS R LINEAR SLIDES 2. 4. 3. 1. Ball Slides 2. X, X-Y, X-Y-Z Positioners with Micrometers 3. Rails 4. Crossed Roller Slides 1. 2-1 TECHNICAL SECTION Typical coefficient of friction
More information(12) Patent Application Publication (10) Pub. No.: US 2014/ A1. Durand (43) Pub. Date: Oct. 30, 2014 PUMP CPC... F04D 13/022 (2013.
US 20140322042A1 (19) United States (12) Patent Application Publication (10) Pub. No.: US 2014/0322042 A1 Durand (43) Pub. Date: Oct. 30, 2014 (54) SWITCHABLE AUTOMOTIVE COOLANT (52) U.S. Cl. PUMP CPC...
More informationForce Control for Machining applications. With speakers notes
Force Control for Machining applications Robotics - 1 May 2007 Contents Introduction Project objectives, execution and result Features, benefits and technical solutions FC Pressure FC SpeedChange Graphical
More informationSolar Tracking Structure Design
Solar Tracking Structure Design Concept Generation and Selection Belsheim Joshua, Francis Travis, He Jiayang, Moehling Anthony, Liu Pengyan, Ziemkowski Micah Oct. 28.2013 Jiayang 1 Presentation Outline
More informationPLE PLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max.
PLE PLE PLE applications 67 PLE dimensions 68 PLE types 69 PLE sizes 71 PLE parts 72 PLE assembly 73 PLE part numbers 76 PLE CHARACTERISTICS The PLE with aluminum stays is available as PLE with plastic
More informationRadius of Wheel Radius of Axle. Ideal Mechanical Advantage =
Simple Machines Wheels and Pulleys Wheels and Axles have been used for thousands of years. Two ways that s wheels and axels help work: 1. Buy reducing the amount of surface in contact and lowers friction
More informatione-drives Handbook and Technical Documentation TP 800
e-drives Handbook and Technical Documentation TP 800 680073 en 04/04 Order no.: 680073 Edition: v1.0 (04/04) Authors: Martin Williams, Thomas Häckel, Edward Gasper, David Hoey Support: Stefan Grabein,
More informationD-25 Drill Rig. 700 Hicks Drive, Elburn, IL Phone:
Power Source: Gasoline or Diesel Engine Maximum Gross Spindle Torque: 2320 ft. lbs. (3145 Nm) to 3066 ft. lbs. (4156 Nm) Spindle Bore: 2-3/8 (60mm) Spindle Travel: 66 (1,676mm) Spindle & Retract Force
More informationDESIGN AND TECHNOLOGY
Candidate Name Centre Number 0 Candidate Number GCSE 142/04 DESIGN AND TECHNOLOGY PAPER 2 FOCUS AREA: SYSTEMS AND CONTROL TECHNOLOGY Higher Tier A.M. MONDAY, 2 June 2008 1 1 2 hours Leave Blank Question
More informationAutomata: Putting it all together. Copyright Paul Oh
Automata: Putting it all together Tentative Schedule 18:00 Guest Lecture 18:30 Lab Putting it All Together : Automata example (The Gymnast) 19:15 Project Time: Form (2-3 person) team; Automata sites and
More informationWorld Academy of Science, Engineering and Technology International Journal of Mechanical and Mechatronics Engineering Vol:11, No:3, 2017
Multipurpose Agricultural Robot Platform: Conceptual Design of Control System Software for Autonomous Driving and Agricultural Operations Using Programmable Logic Controller P. Abhishesh, B. S. Ryuh, Y.
More informationResponsibility and safety: ilcofree. Zero standby power consumption and no electromagnetic fields: the all-pole mains free isolation.
Responsibility and safety: ilcofree Zero standby power consumption and no electromagnetic fields: the all-pole mains free isolation. The safety of patients and residents is our primary concern. With ILCON,
More informationPLE PLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max.
PLE load / (kg/m) inner height / (mm) 66 24 20 16 12 8 4 118 115 80 50 30 16 7 0 0 7 PL E 220 PL E 3 2 0 PLE 520 closed + open PL E 620 2 4 6 8 free carrying length Lf / (m) PLE max. 6 m free carrying
More informationChristine Tartaglia Individual Report: Week 1 February 1, 2012
Over winter break, Nicole and I got together three separate times. The first time, we went to Home Depot and PETCO to look at tubing to build air muscles. At PETCO, we purchased tubing that we thought
More information1. (a) Discuss various types of Kinematic links with examples. (b) Explain different types of constrained motions with examples.
Code No: RR310304 Set No. 1 III B.Tech I Semester Supplementary Examinations, February 2007 KINEMATICS OF MACHINERY ( Common to Mechanical Engineering, Mechatronics and Production Engineering) Time: 3
More informationApril 3, 1956 J. MONTANA 2,740,484 MOTOR DRIVEN STAIR CLIMBING HAND TRUCK
April 3, 1956 J. MONTANA 2,740,484 MOTOR DRIVEN STAIR CLIMBING HAND TRUCK Filed Aug. 26, 1950 3. Sheets-Sheet l //WVEW7OA JAMES MOW/AWA April 3, 1956 J. MONTANA 2,740,484 MOTOR DRIVEN STAIR CLIMBING HAND
More informationFactors to consider when selecting a diverter valve
Factors to consider when selecting a diverter valve Selecting a diverter valve for your pneumatic conveying system can be a tough job, especially when you consider how many diverter valves are on the market.
More informationME6601 DESIGN OF TRANSMISSION SYSTEMS
SYED AMMAL ENGINEERING COLLEGE (Approved by the AICTE, New Delhi, Govt. of Tamilnadu and Affiliated to Anna University, Chennai) Established in 1998 - An ISO 9001:2008 Certified Institution Dr. E.M.Abdullah
More informationLINEAR ACTUATORS. hepcomotion.com
LINEAR ACTUATORS hepcomotion.com PDU2 Belt Driven DLS Belt Driven 3 4 SBD Belt Driven A SDM Ball Screw HDCS Heavy Duty Ball Screw 8 9 LINEAR ACTUATORS ctuator HDLS Heavy Duty Belt Driven PSD Ball Screw
More informationMechanical engineering
ST Questions 1, 2, 4, 7 13, 15 17, A, C and E Checkup 1 WHAT IS MECHANICAL ENGINEERING? (p. 426) 1. Name the branch of science and technology that focuses specifically on the study of technical objects
More informationP15044 Intelligent Mobility Cane
P15044 Intelligent Mobility Cane Name Major Role Allan Andranikian ME Lead Engineer Andrew Greeley ME Vibrations Lead Ben Stewart EE Sensors Lead Dan Chianucci CE Controls Lead Justine Nichols IE Project
More informationII YEAR AUTOMOBILE ENGINEERING AT AUTOMOTIVE CHASSIS QUESTION BANK UNIT I - LAYOUT, FRAME, FRONT AXLE AND STEERING SYSTEM
II YEAR AUTOMOBILE ENGINEERING AT 6402 - AUTOMOTIVE CHASSIS QUESTION BANK UNIT I - LAYOUT, FRAME, FRONT AXLE AND STEERING SYSTEM 1. Write about the requirements of frame and selection of cross section
More informationNEXEN WHITEPAPER. Nexen Group, Inc. 560 Oak Grove Parkway / Vadnais Heights, MN /
NEXEN WHITEPAPER Roller Versatility, Pinion Precision Systemand Short Lead Times: The CRD MR Rotary Indexer Nexen s new indexer is a cost-effective solution for automating a wide variety of tasks. Whether
More informationSL100DCx series Sliding gate system Installation guide
SL100DCx series Sliding gate system Installation guide Application note MAG SL100ACx series is a complete sliding gate automation system. Components in MAG SL100DCx series Gate Automatic System 1 PVC box
More informationLearning System for Automation and Communications. Electropneumatics. Workbook Basic Level S1 K1 K1 Y1
Learning System for Automation and Communications Electropneumatics Workbook Basic Level 1 2 3 S1 K1 K1 S2 K1 094005 Order no. 094005 Description: TEACHW.E-PNEUM. Designation: D.S201-C-GB Edition: 08/1993
More informationPolaris 340 & ATV Power Module Training and Troubleshooting Guide
Polaris 340 & ATV Power Module Training and Troubleshooting Guide Summary: This guide is intended as a training tool for the mechanical evaluation and troubleshooting of a 340 or ATV power module only.
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description SP6000 Plunge Cut Circular Saw 165mm (6-1/2") CONCEPT AND MAIN APPLICATIONS Model SP6000 is the first Makita plunge cut saw. Features great conveniences such
More informationAutocable Spare parts Rev
Autocable Spare parts Rev.4-2009 37 Autocable Tab. 1 - Machine Assembly Pos. Description Q.ty Code Pos. Description Q.ty Code 1 Frame Assembly 1 000640 39 Mechanism Assembly 1 000656 2 Lift Assembly 1
More informationThomson RoundWay Linear Roller Bearings. Designed to withstand extremes of load, speed, temperature and contamination. Linear Motion. Optimized.
Thomson RoundWay Linear Roller s Designed to withstand extremes of load, speed, temperature and contamination. Linear Motion. Optimized. Linear Motion. Optimized. Thomson RoundWay Linear Roller s The patented
More information*N25842RA0116* N25842RA W850/R1974/ /5/3/3. Turn over
Centre No. Candidate No. Paper Reference 1 9 7 4 3 H Surname Signature Paper Reference(s) 1974/3H Edexcel GCSE Design and Technology: Systems & Control Technology (Mechanisms) (Full Course 1974) Paper
More informationPROJECT IDEA SUBMISSION
PROJECT IDEA SUBMISSION Team Contacts - 1 st person listed serves as the point of contact with Professor Nelson - Initial team size may be from 1 to 6 members (all members must agree to have their name
More informationMechanical Power Transmission. September 16, 2008
2008 TE Sessions Supported by Mechanical Power Transmission September 16, 2008 www.robojackets.org Goals Hand out kits to teams that don t have one. More physics concepts and terms Understanding key devices
More informationINDEX. 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts
INDEX Agitating device for pin hopper.----------------------------------------- 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts.-----.----------.--..--
More information5700 SERIES Low Energy Power Operator
Low Energy Power Operator introduction Low energy door operators were once considered a necessity only for those with physical challenges. Today, due to the population s busy lifestyles, the convenience
More information