e-drives Handbook and Technical Documentation TP 800
|
|
- Everett Benson
- 5 years ago
- Views:
Transcription
1 e-drives Handbook and Technical Documentation TP en 04/04
2 Order no.: Edition: v1.0 (04/04) Authors: Martin Williams, Thomas Häckel, Edward Gasper, David Hoey Support: Stefan Grabein, José Leonett, Gerhard Nölle, Hans-Juergen Eberhardt Layout: Wolfgang Schreiner, David Hoey, Martin Williams Festo Didactic GmbH & Co. KG, Denkendorf/Germany, 2004 Internet: The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved, in particular the right to carry out patent, utility model or ornamental design registration.
3 Contents 1. Introduction 4 2. TP 801 Servo motor equipment set 5 3. TP 802 Stepper motor equipment set 6 4. Extension Kits TP 801-E & TP 802-E 7 5. Using the CD 8 6. Assembly of servo motor equipment set Assembly of stepper motor equipment set Exercises Guidelines to exercises Servo motor training aims List of exercises for servo motor training system Stepper motor training aims List of exercises for stepper motor training system Training preparation 26 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 3
4 1. Introduction Welcome to the Festo Didactic e-drives TP 800 Training Packages. There are 4 Training Packages available: 1. TP 801 Servo motor equipment set (Order no ) 2. TP 802 Stepper motor equipment set (Order no ) 3. TP 801-E Extension kit servo (Order no ) 4. TP 802-E Extension kit stepper (Order no ) Recommended accessories: Components Quantity Order no. Either Profile plate 700 x 350 mm Power supply * Or Profile plate 350 x 250 mm Rubber feet (pack of 4) Profile plate connectors Power supply * * This is the part number for a power supply with European plug refer to the Festo Didactic catalog for the relevant part number for other countries. 4 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
5 2. TP 801 Servo motor equipment set Fig. 1: Assembled servo motor equipment set. The TP 801 Servo motor equipment set (Order no ) consists of: Components Quantity Order no. Axis Motor Controller Cable Simubox Systainer Maxi Technical Documentation CD-ROM Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 5
6 3. TP 802 Stepper motor equipment set Fig. 2: Assembled stepper motor equipment set. The TP 802 Stepper motor equipment set (Order no ) consists of: Components Quantity Order no. Axis Motor Controller Adaptor Cable Systainer Maxi Technical Documentation CD-ROM Programming software Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
7 4. Extension Kits TP 801-E & TP 802-E The extension kits allow a user with servo or stepper to upgrade to a complete kit for both servo and stepper with no duplication of generic hardware. The TP 801-E Extension kit servo (Order no ) consists of: Components Quantity Order no. Motor Motor Controller Cable Simubox Systainer size The TP 802-E Extension kit stepper (Order no ) consists of: Components Quantity Order no. Motor Controller Adaptor Cable Systainer size Programming software Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 7
8 5. Using the CD The CD provided with this handbook was designed as a user-friendly interface to the courseware and handbooks and manuals. It lists and organises the courseware into exercises to be conducted on the hardware. The CD should autostart when inserted into a DVD/CD drive. If it doesn t autostart, then open Windows Explorer and browse the CD. Double click the index.htm file found in the root directory of the CD. Use the navigators at the top and on the right of the page to explore the CD and its contents. The CD will work on any PC with a DVD/CD player but requires the following software to view everything correctly: Internet Explorer (5 or higher) as browser Adobe Acrobat Reader Note: When you select a slideshow from the CD (refer Fig. 3), the slide will open within your browser as shown in Fig. 4. The slides are pdf and to open them in full screen, go View > Full Screen as shown in Fig 4. Fig. 3: Selecting a slideshow from a training outcome page on the CD. 8 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
9 5. Using the CD Fig. 4: Opening the slide in full screen. To revert back to a normal browser window, select the Restore button on the top right of your window. Fig. 5: Select Restore to revert to normal viewing in a browser. Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 9
10 6. Assembly of servo motor equipment set The following diagrams indicate assembly of the servo motor equipment set Fig 6: Assembly of servo motor equipment set. Item no. Components 1 Axis 2 Controller 3 Motor 10 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
11 6. Assembly of servo motor equipment set 4 5 Fig 7: Assembly of servo motor equipment set. Item no. Components 4 Power cable 5 Encoder cable Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 11
12 6. Assembly of servo motor equipment set 7 6 LIM+ 8 (2x) LIM- 9 Fig 8: Assembly of servo motor equipment set. Item no. Components 6 Mains plug 7 Test box 8 Limit switches 9 Power supply 24 V 12 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
13 7. Assembly of stepper motor equipment set The following diagrams indicate assembly of the stepper motor equipment set Fig 9: Assembly of stepper motor equipment set. Item no. Components 1 Axis 2 Controller 3 Motor Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 13
14 7. Assembly of stepper motor equipment set LIM+ 4 (2x) LIM- 5 6 Fig 10: Assembly of stepper motor equipment set. Item no. Components 4 Limit switch 5 Motor cable 6 Power supply 24 V 14 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
15 8. Exercises 8.1 Guidelines to exercises Each exercises builds on the previous one to achieve the overall learning outcomes and therefore maybe considered as one big exercise. However, they have been organised into outcomes to facilitate learning and integration into a training course. The resources allow the instructor to progressively introduce the key concepts of stepper and servo motor system installation, application and programming. The outcome defines what the participant is expected to be able to do upon successful completion of the exercise. The explains why the outcome is important for achieving the overall objectives of the course and most importantly for the participant "What is in it for me?" Resources The resources provide the exercise and solution documents as well as courseware to assist in the theory associated with the outcome. Exercises and solutions The exercise is designed to achieve the learning outcome. The solution is provided because due to safety and the inherent nature of stepper and servo motors, learning is best done by participants implementing the provided solution. Note that the exercise is provided on a separate page so the instructor can discuss possible solutions before handing out the actual solution. Slideshows To support the practical exercises, slideshows are provided that may be used by the instructor as required. They may be projected in the classroom and discussed or printed and handed out as resources. Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 15
16 8. Exercises 8.2 Servo motor training aims Objectives & outcomes On the completion of these exercises, you can: Assemble a servo motor system Commission a servo system Conduct a reference move Use speed control Use position control Set ramps Use torque control Use electronic gears/synchronous speed control Describe the benefits and applications of each feature The features and benefits of servo motor control need to be understood (and experienced if possible) in order to be able to design, install, commission, maintain and troubleshoot applications in industry. 16 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
17 8. Exercises 8.3 List of exercises for servo motor training system Exercise 1 Assembly of servo motor system. You are able to correctly and safely assemble a servo motor system. The correct and safe assembly of a servo motor system will familiarise you with the various components of a system, the purpose of these components and how they are connected together to form a functioning system. Exercise 2 Commissioning of servo system and introduction to Wmemoc. You are able to correctly and safely commission a servo system using the main commissioning functions of Wmemoc. The correct and safe commissioning of a stepper system will familiarise you with the software and associated settings that must be made before using the system. Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 17
18 8. Exercises Exercise 3 Speed control in a servo motor system. You are able to set the speed in a system and can explain the benefits of speed control. For safety reasons controllers include the speed control feature. You need to know how to adjust it. When commissioning, it is good practice to test the motor in the directions of rotation with the functions of the speed control. Exercise 4 Initiating a reference move. You are able to conduct a reference move on a servo system. To work accurately, servo systems need a reference point from which all positions are calculated. This is done after commissioning before normal operation. 18 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
19 8. Exercises Exercise 5 Setting system positions, speeds and ramps. You know how to define position sets and three ways of selecting positions. The positions, speeds and ramps have to be defined before they can be called in a program. Therefore it is important that you know how these parameters are defined and stored in the system. It is also important to know Exercise 6 Torque control. You know how to control the torque of a system and know how to use torque control in applications. Torque control is an important feature and benefit that offers safety to man, machine and products. It is important that you are familiar with it and how to make best use of it. Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 19
20 8. Exercises Exercise 7 Use of Speed Synchronous Positioning. You are familiar with the electronic gear of the system and can explain the concept of synchronous movement and the electronic gear and know how to use it with Wmemoc. You are familiar with speed synchronous positioning and the features and benefits it offers. 20 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
21 8. Exercises 8.4 Stepper motor training aims Objectives & outcomes On the completion of these exercises, you can: Assemble a stepper motor system Create a simple WinPISA program Commission a stepper system using WinPISA Describe the advantages and disadvantages of current reduction and how to set it Conduct a reference move Use speed control Use position control Set ramps The features and benefits of stepper motor control need to be understood (and experienced if possible) in order to be able to design, install, commission, maintain and troubleshoot applications in industry. Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 21
22 8. Exercises 8.5 List of exercises for stepper motor training system Exercise 1 Assembly of stepper motor system. You are able to correctly and safely assemble a stepper motor system. The correct and safe assembly of a stepper motor system will familiarise you with the various components of a system, the purpose of these components and how they are connected together to form a functioning system. Exercise 2 Commissioning of stepper system and introduction to WinPISA. You are able to correctly and safely commission a stepper system using the main commissioning functions of WinPISA. The correct and safe commissioning of a stepper system will familiarise you with the software and associated settings that must be made before using the system. 22 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
23 8. Exercises Exercise 3 Current reduction in a stepper motor system. You are able to set current reduction and can explain the advantages and disadvantages of current reduction. Current reduction has advantages and disadvantages that you should understand and be able to explain. Exercise 4 Starting the reference move via WinPISA and the Program Sequence in a Project. You are able to conduct a reference move on a stepper system. To work accurately, stepper systems need a reference point from which all positions are calculated. This position is reset in the reference move. The reference move is essential for the system to know the reference point for all the required positions. It must be conducted: After powering up a stepper system. Whenever slippage (loss of steps) has occurred. Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 23
24 8. Exercises Exercise 5 Setting system speeds (velocity profiles). You know how speeds are stored in the system and how they are called. The speeds and positions have to be defined before they can be called in a program. Therefore it is important that you know how these speeds are defined and stored in the system. Exercise 6 Setting system positions. You know how positions are stored in the system and how they are called. The speeds and positions have to be defined before they can be called in a program. Therefore it is important that you know how these positions are defined and stored in the system. 24 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
25 8. Exercises Exercise 7 Setting ramps (with different profiles). You know how to set the ramp up and ramp down for a move to a position. Ramping the speed up and down is an important feature for providing smooth but fast motion. You must know the benefits of ramps and how to set them. Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 25
26 9. Training preparation Training room checklist This is a checklist of items that are needed in the training room. Description Comment Organiser / Training room Access & starting/finish times Electricity supply Safety glasses Beamer Spare bulb for beamer Supply to PC, Beamer, and Training Equipment Electrical power: 230 V AC and 24 V DC, 3 plugs/training place (2 for Training set and 1 for Laptop) Safety glasses for all participants if required PC projector ensure compatibility with your PC e.g. VGA Ensure there is a spare bulb or contingency plan (some bulbs are very expensive) Whiteboard Flipchart Whiteboard markers & eraser Refreshments & meals Morning break, lunch, afternoon break Other 26 Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation
27 9. Training preparation Instructor checklist This is a checklist of items that the instructor needs to prepare and take to the course. Training resources Description Comment Quantity / PC with e-drives CD 1 PC software Pointer Internet Explorer or other browser, Adobe Acrobat Reader Overhead type, laser or telescopic pointer 1 Consumables Pens, pencils etc for participant 1 per participant Desk name cards Industrial catalog/product CD Participant handouts Supplementary resources As appropriate Printed copies of Reference and other files that participants are to receive 1 per participant 1 per participant 1 per Participant Customized resources Description Quantity / Festo Didactic GmbH & Co. KG TP 800 e-drives Handbook & Technical Documentation 27
Electropneumatics Basic Level Set of Overhead Transparencies TP 201
Electropneumatics Basic Level Set of Overhead Transparencies TP 0 Festo Didactic 0950 en Order No.: 0950 Description: EL-PN.FOLIEN-GS Designation: D:OT-TP0-GB Edition: 0/000 Author: Frank Ebel Graphics:
More informationSorting station Assembly Instructions
Sorting station Assembly Instructions GB 10/02 Intended use This station has been developed and produced exclusively for vocational and further training in the field of automation and communication. The
More informationElectrohydraulics Basic Level Textbook TP 601
Electrohydraulics Basic Level Textbook TP 601 Festo Didactic 093611 en Order No.: 093611 Edition: 03/2006 Authors: C. Löffler, D. Merkle, G. Prede, K. Rupp, D. Scholz Graphics: Doris Schwarzenberger Layout:
More informationTwo-Stroke Diesel & X-DF Engines
Two-Stroke Diesel & X-DF Engines Training Courses CMA CGM A valuable investment WinGD training courses are conducted by professional, STCW-95 certified instructors to improve the technical and operational
More informationHydrogen Fuel Cell Training System
8010-80 Hydrogen Fuel Cell Training System LabVolt Series Datasheet Festo Didactic en 03/2018 Table of Contents General Description 2 Exercises 3 Features & Benefits 3 List of Equipment 4 List of Manuals
More informationHydrogen Fuel Cell Training System ( )
Hydrogen Fuel Cell Training System 579307 (8010-80) LabVolt Series Datasheet Festo Didactic en 10/2018 Table of Contents General Description 2 Exercises 3 Features & Benefits 3 List of Equipment 4 List
More informationDescription AX5806. List of permissible motors. Version: Date:
Description AX5806 List of permissible motors Version: 1.3.0 Date: 2017-11-15 Table of contents Table of contents 1 Foreword 3 1.1 Notes on the manual 3 1.1.1 Intendent audience 3 1.1.2 Origin of the
More informationCircuit Concepts (Residential)
Youth Explore Trades Skills Circuit Concepts (Residential) Description This Activity Plan will allow students to understand how electrical circuits work in a home. Students will also gain knowledge of
More informationTraining Program 2018 Where Education Meets Technology
Training Program 2018 Where Education Meets Technology January December 2018 Training Program 2018 At Ziehm Imaging, we are strongly committed to our customers and their patients. Which means a lot more
More informationWelcome to ABB machinery drives training. This training module will introduce you to the ACS850-04, the ABB machinery drive module.
Welcome to ABB machinery drives training. This training module will introduce you to the ACS850-04, the ABB machinery drive module. 1 Upon the completion of this module, you will be able to describe the
More informationLesson 1: Introduction to PowerCivil
1 Lesson 1: Introduction to PowerCivil WELCOME! This document has been prepared to assist you in the exploration of and assimilation to the powerful civil design capabilities of Bentley PowerCivil. Each
More informationMotor and Generator Training
Motors and Generator Training Course Directory External course offering Motor and Generator Training ABB offers product training courses for motors and generators. These courses are mainly targeted to
More informationVariable Speed-Drive Troubleshooting
Variable Speed-Drive Troubleshooting This course is Designed, Developed, and will be Delivered under ISO 29990:2010 Standards 10-14 October 2016 Vietnam 24-MAR-16 Variable Speed-Drive Troubleshooting Why
More informationPREVIEW ONLY. Course 106 INSTRUCTOR GUIDE. HVAC Systems Introduction and Overview. Module 1: Overview of Rail Car HVAC and General Safety Procedures
Course 106 HVAC Systems Introduction and Overview Module 1: Overview of Rail Car HVAC and General Safety Procedures INSTRUCTOR GUIDE Table of Contents CHECKLIST FOR INSTRUCTION... 3 SUPPLIES, AUDIO-VISUAL
More informationHybrid and Electric Vehicles
Lucas Nülle is proudly and exclusively represented in Australia and New Zealand by Better Learning Outcomes Training Systems Australia A Division of Pullman Learning Group 300 Centre Road, Bentleigh, Victoria,
More informationNetwork Installation. July 2008 CONTENTS
Network Installation CONTENTS General Software Hard Lock System Requirements Installation on Server Installation on Each Work Station Directory Structure July 2008 Require PowerCad-5 Ver 5.0.72.0 PowerCad-5
More informationLife cycle services for protection and control relays Full support from start to finish
Life cycle services for protection and control relays Full support from start to finish The main purpose of the protection and control relay is to protect both human lives and equipment as well as ensure
More informationLearning System for Automation and Communications. Electropneumatics. Workbook Basic Level S1 K1 K1 Y1
Learning System for Automation and Communications Electropneumatics Workbook Basic Level 1 2 3 S1 K1 K1 S2 K1 094005 Order no. 094005 Description: TEACHW.E-PNEUM. Designation: D.S201-C-GB Edition: 08/1993
More informationHazard Control Refresher-Using the ERG 1
Hazard Control Refresher - Using the ERG Time Requirement: Number of Instructors: 1.5-2 hours 1 or more, consistent with ratio shown in the Minimum Criteria Materials Student materials (participant guide,
More informationMultiple Pump Systems
Industrial Maintenance Pumps Training System Multiple Pump Systems Job Sheets - Courseware Sample 37895-F0 Order no.: 37895-30 First Edition Revision level: 08/2015 By the staff of Festo Didactic Festo
More informationBasic Unit of Mechanical Drive Systems MDSU. Engineering and Technical Teaching Equipment INTRODUCTION GENERAL DESCRIPTION
Basic Unit of Mechanical Drive Systems Engineering and Technical Teaching Equipment MDSU Electronic console INTRODUCTION Mechanical drive systems and their applications are widely used in industry and
More informationExchange of rollers from the XTS-Mover
Service documentation for AT901-0050-0550 and AT9011-00x0-0550 Version: Date: 1.0 0.10.017 Table of contents Table of contents 1 Foreword... 5 1.1 Notes on the documentation... 5 1. Documentation issue
More information2013 schedule. Training services brochure
2013 schedule Totalflow products Training services brochure General training information ABB Totalfl ow trainers have over 65 years of experience in the gas measurement industry. From equipment testing,
More informationEJ2440 ELECTRIC TRANSPORTATION
COURSE DESCRIPTION EJ2440 ELECTRIC TRANSPORTATION Period 4, spring 2017, 6 hp Transportation of people and gods is fundamental for a modern society. Apart from trains, almost all transportation is driven
More informationElectrohydraulics Advanced Level Workbook TP 602
Electrohydraulics Advanced Level Workbook TP 602 Festo Didactic 094471 en Authorised applications and liability The Learning System for Automation and Communication has been developed and prepared exclusively
More informationVariable-Frequency Drive Training System
3356-00 Variable-Frequency Drive Training System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 05/2018 Table of Contents General Description 2 Components 3 Carrying Case 4 Courseware 4 Topic
More informationTrain Examination (Braking System) Addendum. Lesson Plan and WorkBook
Train Examination (Braking System) Addendum Lesson Plan and WorkBook (Generic Version) Version 1 June, 2011 IMPORTANT NOTICE This booklet is one of a series of generic training and assessment templates
More informationEPAS Desktop Pro Software User Manual
Software User Manual Issue 1.10 Contents 1 Introduction 4 1.1 What is EPAS Desktop Pro? 4 1.2 About This Manual 4 1.3 Typographical Conventions 5 1.4 Getting Technical Support 5 2 Getting Started 6 2.1
More informationModern Industrial Pneumatics. Design and Troubleshooting Industrial Pneumatics PN111 PN121
Modern Industrial Pneumatics Design and Troubleshooting Industrial Pneumatics PN111 PN121 Drives: Cylinders for different drive purposes Valves: Various valve types (pneumatically/electrically controlled,
More informationEE064D: Circuit Breakers & Switchgears: Design, Testing, Commissioning, Maintenance, Repair & Troubleshooting
EE064D: Circuit Breakers & Switchgears: Design, Testing, Commissioning, Maintenance, Repair & Troubleshooting EE064-D Rev.002 CMCT COURSE OUTLINE Page 1 of 7 Training Description: This intensive five-day
More information5 AXIS CNC WELD PREPARATION MACHINE HIGH-PERFORMANCE CNC PLASMA CUTTING
metaltek PORTABLE CNC ENGINEERING SOLUTIONS metaltek PORTABLE 5 AXIS CNC WELD PREPARATION MACHINE HIGH-PERFORMANCE CNC PLASMA CUTTING Manufactured in Australia by Metaltek is a wholly owned subsidiary
More informationHydraulics and Pneumatics Simulation Software (LVSIM -HYD & PNEU) - 1 User
6387-00 Hydraulics and Pneumatics Simulation Software (LVSIM -HYD & PNEU) - User LabVolt Series Datasheet Festo Didactic en 02/208 Table of Contents General Description 2 Topic Coverage 2 Features & Benefits
More informationHydraulics Simulation Software (LVSIM -HYD) - 10 Users Network (6385-Q0)
Hydraulics Simulation Software (LVSIM -HYD) - 10 Users Network 588018 (6385-Q0) LabVolt Datasheet Festo Didactic en 12/2018 Table of Contents General Description 2 Features 2 Hydraulics Equipment 3 Computer
More informationExercise 2. Discharge Characteristics EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Cutoff voltage versus discharge rate
Exercise 2 Discharge Characteristics EXERCISE OBJECTIVE When you have completed this exercise, you will be familiar with the discharge characteristics of lead-acid batteries. DISCUSSION OUTLINE The Discussion
More informationELGC-BS-KF. Spindle axis. Instructions Operating c [ ]
ELGC-BS-KF Spindle axis Instructions Operating 8095590 8095590 2018-08c [8095592] Translation of the original instructions 2 Festo ELGC-BS-KF 2018-08c Table of contents 1 Further applicable documents...
More informationElectrical Equipment and Safety: Operation, Control, Maintenance and Troubleshooting
Electrical Equipment and Safety: Operation, Control, Maintenance and Troubleshooting Page 1 of 6 Why Attend This course covers the theoretical and practical operation of common electrical equipment and
More informationSolar/Wind Energy Training Systems
Solar/Wind Energy Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Courseware 2 elearning Formats 3 Topic Coverage 3 Features &
More informationSolar/Wind Energy Training Systems LabVolt Series
Solar/Wind Energy Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 08/2018 Table of Contents General Description 2 Courseware 2 elearning Formats 3 Topic Coverage 3 Features &
More informationPRODUCT PORTFOLIO. Electric Vehicle Infrastructure ABB Ability Connected Services
PRODUCT PORTFOLIO Electric Vehicle Infrastructure ABB Ability Connected Services 2 ABB ABILITY CONNECTED SERVICES FOR EV INFRASTRUCTURE PRODUCT PORTFOLIO To successfully run a commercial charging network
More informationToothed belt axis ELGC-TB-KF. Operating instruction [ ]
Toothed belt axis ELGC-TB-KF en Operating instruction 8068220 2017-02 [8068222] Original instructions Identification of hazards and instructions on how to prevent them: Danger Immediate dangers which can
More informationSafe Use of Roll Cages and Donation Chair Bespoke Trolleys
Safe Use of Roll Cages and Donation Chair Bespoke Trolleys Module 3 Updated April 16 Estimated course delivery time: 1.5-2 hours depending on size of group. Equipment Required: 7.5 tonne Team Vehicle Roll
More informationReliable Reach. Robotics Unit Lesson 4. Overview
Robotics Unit Lesson 4 Reliable Reach Overview Robots are used not only to transport things across the ground, but also as automatic lifting devices. In the mountain rescue scenario, the mountaineers are
More informationUnit level 4 Credit value 15. Introduction. Learning Outcomes
Unit 6: Unit code Mechatronics T/615/1480 Unit level 4 Credit value 15 Introduction Auto-focus cameras, car cruise control and automated airport baggage handling systems are examples of mechatronic systems.
More informationBased on results from TIMSS Key. bulb. bulb. switch. wir. battery. wir. switch. Lesson plan on investigative science. wire.
bulb Based on results from TIMSS 2015 Key battery Key ba bu tte switch sw h itc bulb e wir battery switch wire bat sw Lesson plan on investigative science Electricity wir Electricity Pupils performed less
More informationElectronic Park Brake, Service & Reset Tool. User Guide
30662000 Electronic Park Brake, Service & Reset Tool User Guide Produced by the Manufacturer All rights reserved. This publication may not be reproduced, in full or in part, without the express written
More informationPleo Booklet: Instructor
Pleo Booklet: Instructor Introduction to Pleo What is Pleo? Pleo is a robotic dinosaur created by UGobe Life Forms. Pleo can interact with people and objects because she has her own senses and behaviors
More informationEx. 1-1 Nacelle Familiarization and Safety Discussion
Exercise 1-1 Nacelle Familiarization and Safety EXERCISE OBJECTIVE When you have completed this exercise, you will be familiar with key components and safety aspects of the nacelle trainer. You will be
More informationGeneral elearning Course Catalog
General elearning Komatsu Mining Corp. http://mining.komatsu Product designs, specifications and/or data in this document are provided for informational purposes only and are not warranties of any kind.
More informationMerih DDCA60 Operation and User Manual I Merih Asansör A.Ş.
1. WARNINGS! CAUTION This manual contains user guidelines for Merih DDCA60 hardware version v1.05 and software version v1.03. This document will be updated with differences result from version differences.
More information1. WARNINGS CAUTION BEFORE FIRST USE GENERAL NOTE. Merih DDCA60 Operation and User Manual I Merih Asansör A.Ş.
1. WARNINGS! CAUTION This manual contains user guidelines for Merih DDCA60 hardware version v1.05 and software version v1.03. This document will be updated with differences result from version differences.
More informationRAM-Type Interface for Embedded User Flash Memory
June 2012 Introduction Reference Design RD1126 MachXO2-640/U and higher density devices provide a User Flash Memory (UFM) block, which can be used for a variety of applications including PROM data storage,
More informationInstructor Guide. 215: Elevator: Mechanical Drive Systems Module 3: Gearless Drive Systems
PR EV IE W O N LY Instructor Guide 215: Elevator: Mechanical Drive Systems Module 3: Gearless Drive Systems Table of Contents Overview.......4 Gearless Drive Operation...8 Geared Vs. Gearless. 22 Summary..29
More informationDFS-1000 Wiring Diagrams and PC Software Installation.
DFS-1000 Wiring Diagrams and PC Software Installation. For Technical Support Please contact your dealer or email seellc@mchsi.com 1 Important Information - When using a conventional style ignition coil
More informationEngine Division Training Center
Engine Division Training Center Course Catalog 525 Julie Rivers Drive Suite 100 Sugar Land, Texas 77478 Phone 281-325-0676 Fax 281-325-0670 trainingcenter@wpi.com Gas Engine Technology GET 4.5 Days None
More informationExercise 4-1. Nacelle Control System EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Control and simulation of environmental conditions
Exercise 4-1 Nacelle Control System EXERCISE OBJECTIVE When you have completed this exercise, you will know more about the logic behind the control system. In particular, you will understand alarm management
More information6081 Pneumatics Training System
6081 Pneumatics Training System LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 03/2018 Table of Contents General Description 2 Innovative design 3 Virtual Laboratory Equipment 3 Courseware 3
More informationYour web browser (Safari 7) is out of date. For more security, comfort and. the best experience on this site: Update your browser Ignore
Your web browser (Safari 7) is out of date. For more security, comfort and Activitydevelop the best experience on this site: Update your browser Ignore Circuits with Friends What is a circuit, and what
More informationCustomer User Guide. ComTrac CUSTOMER USER GUIDE VERSION 0.1
Customer User Guide ComTrac CUSTOMER USER GUIDE VERSION 0.1 Contents 1 How to use this guide... 3 1.1 Confidentiality... 3 1.2 Purpose of this guide... 3 1.3 What s new and what s changed... 3 1.4 User
More informationEE069: Electrical Engineering for Non-Electrical Engineers
EE069: Electrical Engineering for Non-Electrical Engineers EE069 Rev.002 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This course introduces the Basic Principles of Electricity in a simple, easy
More informationABB Distribution & Transmission Protection and Control training 2010 Relay schools, application, product, and automation communications training
Training catalog ABB Distribution & Transmission Protection and Control training 2010 Relay schools, application, product, and automation communications training 2 ABB Distribution & Transmission Protection
More informationExercise 7. Thyristor Three-Phase Rectifier/Inverter EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Thyristor three-phase rectifier/inverter
Exercise 7 Thyristor Three-Phase Rectifier/Inverter EXERCISE OBJECTIVE When you have completed this exercise, you will know what a thyristor threephase rectifier/limiter (thyristor three-phase bridge)
More informationQuick Start Manual 1.4
XP3.1 WayPoint Quick Start Manual 1.4 Attention! You will need to be familiar with the correct installation, configuration and operation of the XP3.1 Autopilot before you start using XP3.1 WayPoint. 1
More informationActivity 8: Solar-Electric System Puzzle
Section 3 Activities Activity 8: Solar-Electric System Puzzle ACTIVITY TYPE: Worksheet Overview: Introduces the basic components of the Solar 4R Schools (S4RS) solar-electric system and identifies the
More informationProgram 580 Minimum Weight Transmission System
Introduction This program is used to design a gearbox with a minimum weight. It is also useful in estimating the cost and weight of a gearbox before it is manufactured. Gearboxes are attached to prime
More informationMechatronics systems
Mechatronics systems www.matrixtsl.com 1 HP4550 Solution Description This solution contains products from our Locktronics, E-blocks and Automatics ranges. The pack includes a wide variety of resources
More informationLearn How to Optimize Heat Exchanger Designs using Aspen Shell & Tube Exchanger. A self guided demo to get started with Aspen Shell & Tube Exchanger
Learn How to Optimize Heat Exchanger Designs using Aspen Shell & Tube Exchanger A self guided demo to get started with Aspen Shell & Tube Exchanger Why use Aspen Shell & Tube Exchanger? Aspen Shell & Tube
More informationThe Discussion of this exercise covers the following points:
Exercise 3-2 Hydraulic Brakes EXERCISE OBJECTIVE When you have completed this exercise, you will be familiar with the hydraulic circuits of the yaw and the rotor brakes. You will control brakes by changing
More information46120 Solar/Wind Energy Training Systems
46120 Solar/Wind Energy Training Systems LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 04/2018 Table of Contents General Description 2 Courseware 2 elearning Formats 3 Topic Coverage 3 Features
More informationPhotovoltaic Solar Energy Modular Trainers
Photovoltaic Solar Energy Modular Trainers Technical Teaching Equipment Products Products range Units 5.-Energy MINI-EESF. Photovoltaic Solar Energy Modular Trainer (Complete) MINI-EESF/M. Photovoltaic
More informationLabVIEW Software Porting/Upgrade
LabVIEW Software Porting/Upgrade Example: Shock Absorber Testing on a Cargo Hook Test Bench Martin Hasler RUAG Aviation Department Aerodynamics CH-6032 Emmen KOR-TA2014-0082 Contents RUAG Aerodynamics
More informationFamiliarize yourself with the pressure loss phenomenon. The Discussion of this exercise covers the following point:
Exercise 3-2 Pressure Loss EXERCISE OBJECTIVE Familiarize yourself with the pressure loss phenomenon. DISCUSSION OUTLINE The Discussion of this exercise covers the following point: Pressure loss Major
More informationServo-pneumatic drive solution for welding guns. Top quality welding!
Servo-pneumatic drive solution for welding guns Sturdy and precise! Top quality welding! Highlights Extremely short cycle times High quality and outstanding reproducibility of the spot welds Excellent
More informationDIESEL ENGINES MAINTENANCE PONSIBILIT Training Duration 05 days
Training Title DIESEL ENGINES MAINTENANCE PONSIBILIT Training Duration 05 days Training Venue and Dates Diesel Engine Maintenance 5 days 7-11 Sept. 2014 $3,750 Dubai, UAE In any of the 5 star hotel. The
More informationABB life cycle services Uninterruptible power supplies
ABB life cycle services Uninterruptible power supplies 2 ABB Life cycle brochure UPS service portfolio Life cycle services for uninterruptible power supplies As your service partner, ABB guarantees you
More informationMGI. Gyroscope PROCESS DIAGRAM AND UNIT ELEMENTS ALLOCATION. Engineering and Technical Teaching Equipment
Engineering and Technical Teaching Equipment Gyroscope MGI PROCESS DIAGRAM AND UNIT ELEMENTS ALLOCATION ISO 9001: Quality Management (for Design, Manufacturing, Commercialization and After-sales service)
More informationInverted Pendulum Control: an Overview
Inverted Pendulum Control: an Overview K. Perev Key Words: Cart pendulum system; inverted pendulum; swing up control; local stabilization. Abstract. This paper considers the problem of inverted pendulum
More informationSPD DEVICE USER MANUAL V1.2.
USER MANUAL V1.2 contact@sedox.com www.sedox-performance.com 1. Introduction Congratulations! With your new Sedox SPD Device you can now easily reprogram your car in a few minutes. Sedox SPD Device is
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) The UFPT is a modular, smart and unique fluid power and motion control training unit. It contains an excellent integration of industrial-graded hardware and builtin
More informationInstructor Guide. 215: Elevator: Mechanical Drive Systems Module 4: Hydraulic Drive Systems
PR EV IE W O N LY Instructor Guide 215: Elevator: Mechanical Drive Systems Module 4: Hydraulic Drive Systems Table of Contents Overview.......4 Hydraulic Drive Components...10 Hydraulic Drive Variations...47
More information6080 Hydraulics Training System
6080 Hydraulics Training System LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 03/2018 Table of Contents General Description 2 Innovative Design 3 Virtual Laboratory Equipment 3 Courseware 3
More informationIBM CMM Quick Reference Guide
IBM CMM Quick Reference Guide Contents Introduction Prerequisites Requirements Components Used CMM Overview CMM Layout Useful CMM Screens Login Screen System Information Screen Event Log Screen Chassis
More informationISO Quality Standards
Mobile Lifting Euipment 26-30 November 2017 Dubai, United Arab Emirates 26-JAN-17 This course is Designed, Developed, and will be Delivered under ISO Quality Standards Mobile Lifting Euipment WHY CHOOSE
More informationFWT-200 OPTI-CHROMIC READER SYSTEM
FWT-200 OPTI-CHROMIC READER SYSTEM User s Manual Covers Installation and Windows software for ISA and PCI cards September, 2002 Far West Technology, Inc. 330 South Kellogg Ave. Suite D Goleta, CA 93117
More information1291BL Series Technical Specification Single-Axis Rate and Positioning Table System
Datasheet 1291BL Series Technical Specification Single-Axis Rate and Positioning Table System DESCRIPTION The Model 1291BL Single Axis Positioning and Rate Table System is designed to provide precise position,
More informationCONNECTED SERVICEs TACHOGRAPH SOLUTIONS
CONNECTED SERVICEs TACHOGRAPH SOLUTIONS COMPLIANCE MADE EASY Knowing how your drivers are working and how your trucks are being utilised is not just good business practice; it is the law. Vehicle and driver
More informationElectrical Machines. Unit level 4 Credit value 15. Introduction. Learning Outcomes
Unit 21: Unit code Electrical Machines A/615/1495 Unit level 4 Credit value 15 Introduction Electrical machines can be found in manufacturing, transport, consumer appliances and hospitals. People will
More informationLEARN2BURN. Schwabe Extension Arm Systems and Training Concepts
LEARN2BURN Schwabe Extension Arm Systems and Training Concepts To gain practical experience for use in everyday practice Small series and custom made production Why use extension arm systems for motorcycles?
More informationZT-USB Series User Manual
ZT-USB Series User Manual Warranty Warning Copyright All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year, beginning from the date of delivery
More informationOBIS. A Handbook. Tim Birkholz. Final Project Conference Prague, choice GmbH Holzmarkstraße Berlin
OBIS A Handbook Tim Birkholz Final Project Conference Prague, 21.06.2011 choice GmbH Holzmarkstraße 6-9 10179 Berlin Tel: +49 (0)30 / 231491-210 Fax: +49 (0)30 / 231491-230 Email: birkholz@choice.de Content
More informationBasic Pneumatics. Module 6: Flow control Valves. Academic Services PREPARED BY. April 2012
Basic Pneumatics Module 6: Flow control Valves PREPARED BY Academic Services April 2012 Applied Technology High Schools, 2012 Module 6: Flow control valves Module Objectives After the completion of this
More informationElectro-Mechanical Training System with DC Motor
Electro-Mechanical Training System with DC Motor LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 07/2018 Table of Contents General Description 2 PLC Compatibility 2 Features & Benefits 2 List
More informationTraining at its best
Training at its best MAN Diesel & Turbo Courses Offered Worldwide We are committed to ensuring our customers gain the best qualifications possible, so that the operation and maintenance of equipment and
More information2010 Prince Edward Island Department of Education and Early Childhood Development P.O. Box 2000, Charlottetown Prince Edward Island Canada, C1A 7N8
2010 Prince Edward Island Department of Education and Early Childhood Development P.O. Box 2000, Charlottetown Prince Edward Island Canada, C1A 7N8 Tel. (902) 368-4600 Fax. (902) 368-4622 http://www.gov.pe.ca/eecd/
More informationNOTICE. The above identified patent application is available for licensing. Requests for information should be addressed to:
Serial Number 045.963 Filing Date 18 March 1998 Inventor Michael W. Williams James B. Walsh NOTICE The above identified patent application is available for licensing. Requests for information should be
More informationCourse Code: Bendix Wingman Fusion System Overview Study Guide
Course Code: 8792 Bendix Wingman Fusion System Overview Study Guide 2015 Navistar, Inc. 2701 Navistar Drive, Lisle, IL 60532. All rights reserved. No part of this publication may be duplicated or stored
More informationHuf Group. Your Preferred Partner for Tire Pressure Monitoring Systems. IntelliSens App
IntelliSens App For Android & ios devices Revision 2.0 17.10.2016 Overview Function flow... 3 HC1000... 4 First Steps... 5 How to Read a Sensor... 7 How to Program a Sensor... 10 Program a Single Universal
More informationZio Decoder App. Quick Start Guide
RGBSPECTRUM z o Zio App For Philips Smart Displays Quick Start Guide The RGB Spectrum Zio App for Android-based smart displays provides many of the same features as the Zio Model D2002, in a software-based
More informationExercise 6. Three-Phase AC Power Control EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Introduction to three-phase ac power control
Exercise 6 Three-Phase AC Power Control EXERCISE OBJECTIVE When you have completed this exercise, you will know how to perform ac power control in three-phase ac circuits, using thyristors. You will know
More informationPrinciples, Maintenance and Operation
An Intensive 5 Day Training Course Sulzer Pump, Hydrodynamic Couplings and Principles, Maintenance and Operation 17-21 Sep 2017, Dubai 03-JUL-17 This course is Designed, Developed, and will be Delivered
More informationustepper - Robot Arm Assembly instructions Microcontroller, stepper driver and encoder in an ultra-compact design! By ON Development IVS
ustepper - Robot Arm Assembly instructions Microcontroller, stepper driver and encoder in an ultra-compact design! By ON Development IVS 2016 ON Development IVS All Rights Reserved Assembly notes The parts
More information