Steady Rests Ordering Guide

Transcription

1 2016 Self-Centering Steady Rests Steady Rests Ordering Guide LMCworkholding.com Workholding s First Call 1

2 CONTENTS Steady Rest Ordering Guide...3 Ordering Information...4 Mount style...5 Adapter for Existing Mounts...5 Tailstock Guide...5 Flat bed...5 Linear Motion guide...6 Turret...6 Machining Center...6 Machine Information...7 Steady Rest Selection...8 Steady Rest size...8 Lubrication Options...8 Hydraulic Needs...9 Order Form...10 Order Form Checklist...11

3 STEADY REST ORDERING GUIDE

4 ORDER INFORMATION CUSTOMER The first step to receiving a quote is gathering the necessary customer information: Dealer name Name of contact Contact phone number or END USER End user information is also required in the event that LMC needs to contact them. The necessary information is: Company name Name of contact Contact phone number or

5 MOUNT STYLE The mount style may determine many of the possible options and should be selected next. Standard styles of machine mounts include: ADAPTER FOR EXISTING BRACKET For machines with an existing bracket, a adaptor plate can be made to attach the Steady Rest. FIGURE 1: EXISTING MOUNT AND TAILSTOCK GUIDE (BOX GUIDE WAY) TS slide The tailstock guide mount is designed to slide and secure in the existing tailstock guide. It is capable of fitting any size Steady Rest with bracket as long as space permits. FIGURE 2: STEADY REST WITH TS SLIDE FLAT BED (BOX GUIDE WAY) A Steady Rest bracket can be attached to all flat bed machines as long as space permits. FIGURE 3: FLAT BED MACHINE

6 LINEAR MOTION GUIDE The Steady Rest cannot easily attach to a linear motion guide. It can be difficult to order the correct slide for the guide, and often there is a sliding chip guard. In the event the machine has a steel groove, a mount can be made for it. FIGURE 4: LINEAR FLAT BED GUIDE TURRET MOUNT The Steady Rest can be mounted to a machine s turret. There is an optional rotary joint to ease positioning of Steady Rest for large parts. FIGURE 5: TURRET MOUNTED MACHINING CENTER MOUNT For machining centers with a rotary table, a mount can be made which mounts to the machine s table. Multiple Steady Rests can be used with these machines. FIGURE 6: BRACKET FOR MACHINE

7 MACHINE INFORMATION The machine name, model, and serial number are useful for selecting from existing mounting solutions. If a mount does not exist, one can be designed using a simple 2D drawing with key dimensions of the machine to assure the Steady Rest will fit. More information may be needed later for the hydraulic system, lubrication, or hose layout.

8 STEADY REST SELECTION STEADY REST SIZE There is a large variety of Steady Rest available to meet all your turning needs. The appropriate gripping range for the work piece needs to be selected, these ranges are: Gripping Range (mm) If the work piece does not fit in these standard sizes, a custom size Steady Rest can be ordered. LUBRICATION OPTIONS MANUAL LUBRICATION Steady Rest with manual lubrication come thoroughly greased internally, and a single grease nipple for continued lubrication AUTOMATIC LUBRICATION Steady Rest with automatic lubrication is oiled through integrated metering valves, and requires an auto-lube system. If require Atling can provide.

9 HYDRAULIC SYSTEM The Steady Rest hydraulic mechanisms can be controlled by: Hydraulic fluid Compressed air High pressure coolant Existing hydraulic lines or a separate hydraulic unit can be used. There is also a wide range of connectors and controllers that can be purchased for installation. Pressure gauge Solenoid valve Flow regulator Pressure reducing valve Manifold block Connectors Hoses FIGURE 10: STEADY REST TYPICAL HYDRAULIC SYSTEM Automatic hydraulics Automatic lubrication

10 ORDER FORM CUSTOMER INFORMATION Customer name: Customer contact: Phone or END USER INFORMATION End User name: End User contact: Phone or MACHINE INFORMATION Make: Model: Serial #: (Please attach machine data with dimensions)

11 ORDER FORM ORDER CHECKLIST BRACKET OPTIONS Bracket Mount Style Adapter for existing bracket Bracket for TS guide fixed Bracket for TS guide traveling Bracket for flat bed Adapter for turret Bracket machining center Bracket Mount Side Left (chuck side) Right (tailstock side) Both Bracket Base Lubrication Manual grease Automatic central lubrication STEADY REST OPTIONS Steady Rest Gripping Range (mm) special Steady Rest Special design Thin Lever Grinding Stroke control Swing-away lever Steady Rest Operated by Hydraulic fluid Compressed Air High pressure coolant Steady Rest wiper Standard wiper seal Automatic wiper seal Steady Rest Mode of Operation Fixed Traveling Steady Rest Lubrication Type Manual Automatic AUTOMATION OPTIONS Hydraulics kit Hose Kit Solenoid valve kit Hydraulic power unit Lubrication kit Hose kit Pump unit

12