Ball and Check Valves. Section 16

Size: px

Start display at page:

Download "Ball and Check Valves. Section 16"

Helena Briggs
5 years ago
Views:

1 Ball and Check Valves Section 16

2 16-1 INFORMATION - BALL AND CHECK VALVES GENERAL INFORMATION Ball valves supplied by Hydraulink can be used for a wide range of applications. Various options are available subject to the pressure and porting requirements. When specifying or selecting a ball valve for a particular application, the following criteria should be considered; What functions are required of the coupling? What is the uid ow rate required? What size and end type of port thread is required? What are the ambient and uid temperature requirements? What is the system working pressure? What are the variations in system pressure; how high are the spikes? What is the uid or media to be conveyed? Ball valves are typically supplied in supplied in steel and nished with a silver trivalent chromium plating and clear sealant to further increase protection against corrosion, but are also available other material such as AISI 316 stainless steel. In addition to the valves listed, a wide range of options for port connection styles including S.A.E., D.I.N. and A.N.S.I. anges. Please contact Hydraulink for further details of available materials, internal seal, con guration and end type combinations. Check valves (or non-return valves) supplied by Hydraulink are available in various combinations of end type (thread form) and crack pressure. On request, Hydraulink can also supply kits to update the crack pressure of existing check valves. Material is typically steel, nished with a silver trivalent chromium plating and clear sealant to further increase protection against corrosion. Please contact Hydraulink for further details of available materials, crack pressure and end type combinations. 15 Hydraulink Fluid Connectors Ltd. reserves the right to discontinue, or to alter the design and speci - cation of any product listed in this catalogue. Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice Copyright HYDRAULINK FLUID CONNECTORS 2010

3 16-2 AND CHECK VALVES INDEX LOW PRESSURE LOW PRESSURE LPBV Page 16-3 BV Page 16-3 L-PORTED 3 WAY BALL VALVE BV3L Page 16-4 REDUCED BORE BVR Page 16-4 CHECK VALVES BSPPF CHECK VALVE CVF Page 16-5

4 16-3 AND CHECK VALVES LOW PRESSURE LPBV LOW PRESSURE LOW PRESSURE PLATED BRASS Part Number BSPTF Female Thread (B) Bore psi Bar LPBV-04 1/4 10mm LPBV-06 3/8 10mm LPBV-08 1/2 15mm LPBV-12 3/4 20mm LPBV mm LPBV /4 32mm LPBV /2 40mm LPBV mm BV BLOCK TYPE WITH MOUNTING HOLES UP TO -16 VALVES UP TO AND INCLUDING -16 ARE BLOCK TYPE BODY. VALVES -20 TO -32 HAVE A FORGED BODY. Part Number BSPP Female Thread Internal Bore - mm - bar - psi Mounting Hole Size - mm BV-04 1/ BV-06 3/ BV-08 1/ BV-12 3/ BV BV / n/a BV / n/a BV n/a - Please contact Hydraulink for further details and availability. Pricing current as at 2 Jul 2018 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.

16-4 AND CHECK VALVES BV3L L-PORTED 3 WAY BALL VALVE BLOCK TYPE WITH MOUNTING HOLES UP TO -16 VALVES UP TO AND INCLUDING -16 ARE BLOCK TYPE BODY. VALVES -20 TO -32 HAVE A FORGED BODY.

5 16-4 AND CHECK VALVES BV3L L-PORTED 3 WAY BALL VALVE BLOCK TYPE WITH MOUNTING HOLES UP TO -16 VALVES UP TO AND INCLUDING -16 ARE BLOCK TYPE BODY. VALVES -20 TO -32 HAVE A FORGED BODY. Part Number BSPP Female Thread Internal Bore - mm - bar - psi Mounting Hole Size - mm BV3L-04 1/ BV3L-06 3/ BV3L-08 1/ BV3L-12 3/ BV3L BV3L / BV3L / BVR REDUCED BORE FORGED TYPE WITHOUT MOUNTING HOLES Part Number BSPP Female Thread Internal Bore - mm - bar - psi BV-20R 1.1/ BV-24R 1.1/ BV-32R Please contact Hydraulink for further details and availability. Pricing current as at 2 Jul 2018 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.

6 16-5 AND CHECK VALVES CHECK VALVES CVF BSPPF CHECK VALVE STEEL CHECK VALVE (5 psi CRACK PRESSURE) Part Number Base Size BSPP Female Thread (A) BSPP Female Thread (B) Overall Length (L) Hex A/F (CH1) CVF /4-19 1/ CVF /8-19 3/ CVF /2-14 1/ CVF /4-14 3/ CVF Please contact Hydraulink for further details and availability. Pricing current as at 2 Jul 2018 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.

Quick Release Couplings. Section 15

Quick Release Couplings. Section 15 Quick Release s Section 15 15-1 INFORMATION - QUICK - QUICK RELEASE COUPLINGS GENERAL INFORMATION Quick release couplings are primarily designed to allow quick and easy connection and disconnection of