Low Pressure Series UF
|
|
|
- Dustin Atkins
- 5 years ago
- Views:
Transcription
1
![tic working pressure C v value Cross section Page bore and st. st. [bar/psi]* both sides one side for liquids for gases self sealing self sealing [mm 2 ] 6 UF-006 40 / 580 30 / 435 0.77 1.](/docs-images/92/108707481/images/2-1.jpg "1 30 42 7 UF-007 40 / 580 25 / 360 1.07 1.4 40 43 12 UF-012 30 / 435 20 / 290 3.25 4.34 120 44 19 UF-019 30 / 435 20 / 290 7.5 11.2 300 45 32 UF-032 30 / 435 10 / 145 23.8 29.")
2 Low Pressure Couplings with various fitting shapes Due to differently shaped guide components (triangular, square, round) of coupling and adaptor only coupling halves with the same fitting may be connected. Other fitting shapes on request Colour / character markings on request 41 Nom. Type Max. static working pressure C v value Cross section Page bore and st. st. [bar/psi]* both sides one side for liquids for gases self sealing self sealing [mm 2 ] 6 UF / / UF / / UF / / UF / / UF / / Performance diagrams * based on experience, valid up to 100 C Please note: In case of standardised end connections, please take the max. allowable working pressure of the end connection into account when determining the working pressures. The types UF-006, UF-007, UF-012 und UF-019 in stainless steel (1.4404, or equal) are delivered as standard without knurling but in a smooth version (-GL/-GX) with finger grooves. Actual design differs from drawing.
3 42 - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) (outer diameter 29 mm) Type UF =, chem. nickel 31 = aluminium anodized silver Nom. Bore 6 mm chrome ISO UF WR DR BSPP 1 / 4 m m k UF WR VI BSPP 1 / 4 m m k UF WR DR BSPP 3 / 8 m ; k UF WR VI BSPP 3 / 8 m ; k UF WR DR BSPP 1 / 2 ; ; k UF WR VI BSPP 1 / 2 ; ; k UF WR DR BSPP 1 / 4 m ; k UF WR VI BSPP 1 / 4 m ; k UF WR DR BSPP 3 / 8 ; ; k UF WR VI BSPP 3 / 8 m m k UF SL DR 6 mm ; ; k UF SL VI 6 mm ; ; k UF SL DR 9 mm m m k UF SL VI 9 mm m m k UF SL DR 11 mm ; ; k UF SL VI 11 mm ; ; k UF SL DR 13 mm ; ; k UF SL VI 13 mm ; ; k ISO ISO UF WR DR BSPP 1 / 4 m ; k ,1 90 UF WR VI BSPP 1 / 4 m ; k ,1 90 UF WR DR BSPP 3 / 8 m ; k ,1 100 UF WR VI BSPP 3 / 8 m ; k ,1 100 UF WR DR BSPP 1 / 2 ; ; k ,1 120 UF WR VI BSPP 1 / 2 ; ; k ,1 120 UF WR DR BSPP 1 / 4 m ; k ,1 95 UF WR VI BSPP 1 / 4 m ; k ,1 95 UF WR DR BSPP 3 / 8 ; ; k ,1 100 UF WR VI BSPP 3 / 8 ; ; k ,1 100 UF SL DR 6 mm ; ; k ,1 85 UF SL VI 6 mm ; ; k ,1 85 UF SL DR 9 mm m ; k ,1 90 UF SL VI 9 mm m ; k ,1 90 UF SL DR 11 mm ; ; k ,1 95 UF SL VI 11 mm ; ; k ,1 95 UF SL DR 13 mm ; ; k ,1 110 UF SL VI 13 mm ; ; k ,1 110 UF WR DR BSPP 1 / 4 k k k 18, , ,1 29 UF WR VI BSPP 1 / 4 k k k 18, , ,1 29 UF WR DR BSPP 3 / 8 k k k , ,1 41 UF WR VI BSPP 3 / 8 k k k , ,1 41 UF WR DR BSPP 1 / 4 k k k 18, , ,1 31 UF WR VI BSPP 1 / 4 k k k 18, , ,1 31 UF SL DR 6 mm m k k 16 48, ,1 20 UF SL VI 6 mm m k k 16 48, ,1 20 UF SL DR 9 mm m k k 16 53, ,1 25 UF SL VI 9 mm m k k 16 53, ,1 25 UF SL DR 11 mm k k k 16 53, ,1 32 UF SL VI 11 mm k k k 16 53, ,1 32
4 - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) (outer diameter 34 mm) Type UF =, chem. nickel Nom. Bore 7 mm 43 chrome ISO UF WR DR BSPP 3 / 8 ; ; ; UF WR VI BSPP 3 / 8 ; ; ; UF WR DR BSPP 1 / 2 ; ; k UF WR VI BSPP 1 / 2 ; ; k UF WR DR BSPP 3 / 8 ; ; ; UF WR VI BSPP 3 / 8 ; ; ; UF WR DR BSPP 1 / 2 ; ; k UF WR VI BSPP 1 / 2 ; ; k UF SL DR 9 mm k k k UF SL VI 9 mm k k k UF SL DR 11 mm k k k UF SL VI 11 mm k k k UF SL DR 13 mm ; ; ; UF SL VI 13 mm ; ; ; ISO ISO UF WR DR BSPP 3 / 8 ; ; ; , ,5 170 UF WR VI BSPP 3 / 8 ; ; ; , ,5 170 UF WR DR BSPP 1 / 2 ; ; k , ,5 190 UF WR VI BSPP 1 / 2 ; ; k , ,5 190 UF WR DR BSPP 3 / 8 ; ; ; , ,5 180 UF WR VI BSPP 3 / 8 ; ; ; , ,5 180 UF WR DR BSPP 1 / 2 ; ; k , ,5 200 UF WR VI BSPP 1 / 2 ; ; k , ,5 200 UF SL DR 9 mm k k k , ,5 170 UF SL VI 9 mm k k k , ,5 170 UF SL DR 11 mm k k k , ,5 170 UF SL VI 11 mm k k k , ,5 170 UF SL DR 13 mm ; ; ; , ,5 180 UF SL VI 13 mm ; ; ; , ,5 180 UF WR DR BSPP 3 / 8 k k k , ,5 48 UF WR VI BSPP 3 / 8 k k k , ,5 48 UF WR DR BSPP 3 / 8 k k k ,5 60 UF WR VI BSPP 3 / 8 k k k ,5 60 UF SL DR 9 mm k k k 18 57, ,5 31 UF SL VI 9 mm k k k 18 57, ,5 31 UF SL DR 11 mm k k k 18 57, ,5 41 UF SL VI 11 mm k k k 18 57, ,5 41 UF SL DR 13 mm k k k 18 57, ,5 50 UF SL VI 13 mm k k k 18 57, ,5 50
5 44 - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) (outer diameter 44 mm) Type UF =, chem. nickel Nom. Bore 12 mm chrome ISO UF WR DR BSPP 1 / 2 ; k k UF WR VI BSPP 1 / 2 ; k k UF WR DR BSPP 3 / 4 ; k k UF WR VI BSPP 3 / 4 ; k k UF WR DR BSPP 1 k k k UF WR VI BSPP 1 k k k UF WR DR BSPP 1 / 2 ; k k UF WR VI BSPP 1 / 2 ; k k UF WR DR BSPP 3 / 4 ; ; k UF WR VI BSPP 3 / 4 ; ; k UF SL DR 16 mm ; k k UF SL VI 16 mm ; k k UF SL DR 19 mm ; k k UF SL VI 19 mm ; k k ISO ISO UF WR DR BSPP 1 / 2 ; k k ,5 330 UF WR VI BSPP 1 / 2 ; k k ,5 330 UF WR DR BSPP 3 / 4 ; k k ,5 360 UF WR VI BSPP 3 / 4 ; k k ,5 360 UF WR DR BSPP 1 k k k ,5 320 UF WR VI BSPP 1 k k k ,5 320 UF WR DR BSPP 1 / 2 ; k k ,5 360 UF WR VI BSPP 1 / 2 ; k k ,5 360 UF WR DR BSPP 3 / 4 ; ; k ,5 340 UF WR VI BSPP 3 / 4 ; ; k ,5 340 UF SL DR 16 mm ; k k ,5 340 UF SL VI 16 mm ; k k ,5 340 UF SL DR 19 mm ; k k ,5 360 UF SL VI 19 mm ; k k ,5 360 UF WR DR BSPP 1 / 2 k k k , ,5 110 UF WR VI BSPP 1 / 2 k k k , ,5 110 UF WR DR BSPP 1 / 2 k k k 33, , ,5 150 UF WR VI BSPP 1 / 2 k k k 33, , ,5 150 UF SL DR 16 mm k k k 25 68, ,5 95 UF SL VI 16 mm k k k 25 68, ,5 95
6 - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) (outer diameter 62 mm) Type UF =, chem. nickel Nom. Bore 19 mm 45 chrome ISO UF WR DR BSPP 3 / 4 ; k k UF WR VI BSPP 3 / 4 ; k k UF WR DR BSPP 1 ; ; k UF WR VI BSPP 1 ; ; k UF WR DR BSPP 3 / 4 ; ; k UF WR VI BSPP 3 / 4 ; ; k UF WR DR BSPP 1 ; ; k UF WR VI BSPP 1 ; ; k UF SL DR 19 mm ; ; k UF SL VI 19 mm ; ; k UF SL DR 25 mm ; ; k UF SL VI 25 mm ; ; k UF SL DR 28 mm ; ; k UF SL VI 28 mm ; ; k ISO ISO UF WR DR BSPP 3 / 4 ; k k ,5 760 UF WR VI BSPP 3 / 4 ; k k ,5 760 UF WR DR BSPP 1 ; ; k ,5 790 UF WR VI BSPP 1 ; ; k ,5 790 UF WR DR BSPP 3 / 4 ; ; k ,5 830 UF WR VI BSPP 3 / 4 ; ; k ,5 830 UF WR DR BSPP 1 ; ; k ,5 760 UF WR VI BSPP 1 ; ; k ,5 760 UF SL DR 19 mm ; ; k ,5 790 UF SL VI 19 mm ; ; k ,5 790 UF SL DR 25 mm ; ; k ,5 860 UF SL VI 25 mm ; ; k ,5 860 UF SL DR 28 mm ; ; k ,5 890 UF SL VI 28 mm ; ; k ,5 890 UF WR DR BSPP 3 / 4 k k k 45, , ,5 280 UF WR VI BSPP 3 / 4 k k k 45, , ,5 280 UF WR DR BSPP 1 k k k 45, , ,5 310 UF WR VI BSPP 1 k k k 45, , ,5 310 UF SL DR 25 mm k k k ,5 270 UF SL VI 25 mm k k k ,5 270
7 46 Type UF-032 Nom. Bore 32 mm GG = with ring grips (cast aluminium) (outer diameter 89 mm) 24 =, chem. nickel chrome pipe parallel (BSPP) male thread to DIN UF WR DR BSPP 1 1 / 2 ; k k UF WR VI BSPP 1 1 / 2 ; k k UF WR DR BSPP 2 k k k UF WR VI BSPP 2 k k k pipe par- 1 / 2 ; k k UF WR DR BSPP 1 UF WR VI BSPP 1 allel (BSPP) female thread to 1 / 2 ; k k UF WR DR BSPP 2 ; k k UF WR VI BSPP 2 ; k k DIN hose connection UF SL DR 42 mm k k k UF SL VI 42 mm k k k UF SL DR 53 mm k UF SL VI 53 mm k pipe parallel (BSPP) male thread to DIN UF WR DR BSPP 1 1 / 2 ; k k , UF WR VI BSPP 1 1 / 2 ; k k , UF WR DR BSPP 2 k k k , UF WR VI BSPP 2 k k k , pipe par- 1 / 2 ; k k , UF WR DR BSPP 1 UF WR VI BSPP 1 allel (BSPP) female thread to 1 / 2 ; k k , UF WR DR BSPP 2 ; k k , UF WR VI BSPP 2 ; k k , DIN hose connection pipe parallel (BSPP) male thread to DIN UF SL DR 42 mm k k k , UF SL VI 42 mm k k k , UF SL DR 53 mm k , UF SL VI 53 mm k , UF WR DR BSPP 1 1 / 2 k k k 61, , UF WR VI BSPP 1 1 / 2 k k k 61, , pipe parallel (BSPP) fe- 1 / 2 k k k 66, UF WR DR BSPP 1 UF WR VI BSPP 1 male thread to 1 / 2 k k k 66, DIN hose connection UF SL DR 42 mm k k k UF SL VI 42 mm k k k
8 Performance Diagram Medium Water 47 Non-interchangeable Measurement of flow coefficients Cv Flow speeds of 8 m/sec version according to DIN EN should not be exceeded 1 bar = 14,5 PSI Both sides self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar Flow Q in m 3 /h in l/min } at ϑ = 18 C One side self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar Flow Q in m 3 /h in l/min } at ϑ = 18 C
9 48 Performance Diagram Medium Air Non-interchangeable Measurement of flow coefficients Cv Working pressure 6 bar version according to DIN EN gauge pressure 1 bar = 14,5 PSI Flow Q in m 3 /h bei ϑ = 20 C Both sides self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar One side self sealing Flow Q in m 3 /h bei ϑ = 20 C both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar
Low Pressure Series KL
Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
Magnetic Sizes mm
CATALOGUE > Release 8.7 > Series CGB guided parallel grippers Series CGB guided parallel grippers Running out of stock Magnetic Sizes 6-20 - 25-32 mm»» Guided mechanism which allows high repeatability»»
MARYLAND METRICS. products are available from
products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
Camlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications
Snaplock Camlock Couplings The original Snaplock quick release coupling The tried & trusted cam coupling with the high reputation of the Snaplock brand name offering additional features to our standard
Indexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
TECHNICAL CATALOGUE BALL VALVES: PARIS
TECHNICAL CATALOGUE BALL VALVES: PARIS TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
Air Operated Stainless Steel 6000psi Ball Valve
Type: PA2811 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,
Parallel Gripper Series CGB
Parallel Gripper Series CGB Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The guided parallel gripper mod. CGB is available in 4 different sizes and is equipped with a guide mechanism that offers
TECHNICAL CATALOGUE BALL VALVES: VIENNA
TECHNICAL CATALOGUE BALL VALVES: STANDARD LOW BALL VALVES: Suitable for domestic water ServiceS, heating, airconditioning plants and compressed air SyStemS. BALL VALVES 116 BALL VALVE, STANDARD LOW size
Ball valves and shut off valves
Shut off valves HE Hand slide valves W Ball valves QH, manually actuated Ball valves VAPB, mechanically actuated Ball valves VAPB CR, mechanically actuated, corrosion resistant 2003/10 Subject to change
TECHNICAL CATALOGUE GAS BALL VALVES: BERLIN
TECHNICAL CATALOGUE GAS BALL VALVES: BERLIN TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
AIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION
compact cylinders, standardised to ISO 21287 compatibility for assembly ISO 15552 mountings double acting - Series 449 short stroke cylinders single acting / double acting Series 441 AIR CYLINDERS cylinders
KEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
Economy Air Operated Brass Ball Valve
Type: PA1101E Type: PA1111E Type: PA1121E Pneumatic actuator direct mounted Actuator fitted via mounting kit Actuator fitted via TSM stem extension Pneumatic Actuator features: Rack and pinion construction
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
Maxifluss Rotary Plug Valve. VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R
Maxifluss Rotary Plug Valve VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN 25
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
Flanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
STEERING AND SUSPENSION section 2
STEERING AND SUSPENSION section TRRT-PC piece Track Rod Removal Tool Kit Quality, kit designed for easy removal and installation of ball joints on track rods. Knurled handle provides extra grip and three
SERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET
SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
SERIES BCS STRETCH ROD CYLINDERS
BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH
Glass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
Type. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
List Price. Part Number
162 style tp piston T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling
TECHNICAL CATALOGUE WASHING MACHINE VALVES
TECHNICAL CATALOGUE WASHING MACHINE VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
Engineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
TECHNICAL CATALOGUE DISTRIBUTION MANIFOLDS
TECHNICAL CATALOGUE DISTRIBUTION TEC ITAP SpA, founded in Lumezzane (Brescia) in 972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing
Keystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
A Type Double Acting Actuator Type: PA2911
Type: PA2911 Actuator fitted via mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned spring sets,
Alcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
LF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
PRODUCT OVERVIEW. Hydraulic Couplings and Valves
PRODUCT OVERVIEW Hydraulic Couplings and Valves www.holmbury.com www.holmbury.com HQ & H Series Flat face made to the ISO 16028 Standard H90 Series 90 Flat face made to the ISO 16028 Standard Body Sizes
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
2 PC FULL BORE BALL VALVE
Pressure (Bar) 2 PC FULL BORE 1000PSI STAINLESS STEEL THREADED BALL VALVE Feature: 2 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working Pressure: 1000 PSI / 2000 PSI Threaded
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
Precise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
FEROGLIDE. Self lubricating bearings TECHNICAL MANUAL
FEROGLIDE Self lubricating bearings TECHNICAL MANUAL www.tenmat.com Page 1 Issue 2 Contents Topic Page Operating Parameters 3 Bearing Load Limits 3 Bearing Wear 4 Velocity Limit 4 Pressure Velocity (PV)
Type 455, 456. Type 455, 456. Flanged Safety Relief Valves spring loaded
Type 455, 456 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Type 456 Packed lever H4 Closed bonnet Materials 08/02 Balanced bellows design 08/04 How to order Numbering system 08/06 Article
Grooved gaskets. Types of gaskets
Types of gaskets have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our grooved gaskets can be found in conventional power plants as well as in the primary
TELESCOPIC RAIL HEAVY
TELESCOPIC RAIL HEAVY Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right
3 CONNECTING PIECES NORMAG - LABORATORY GLASSWARE. L 303 e.1
3 CONNECTING PIECES NORMAG - LABORATORY GLASSWARE L 303 e.1 CONICAL GROUND JOINTS Besides a numerous of other types of connectors, conical ground joints are mostly used for laboratory glassware. They are
Product Catalogue November 2017
Product Catalogue November 207 Manual and Actuated Valves It s all at Albion Contents Brass 4 Ball Valves Way Valves Check Valves Gate Valves Strainers Press Valves 9 Ball Valves Check Valves Strainer
DIRECT REPLACEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP STRETCHING CYLINDERS
SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD P Quality SIDEL Support Delivery PLASTIC PACKAGING COMPONENTS P ASTIC PACKAGING COMPONENTS GRO DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
One-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
Double Acting (air to air) and Single Acting (spring return), 90 operation, pneumatic actuators.
Double Acting (air to air) and Single Acting (spring return), 90 operation, pneumatic actuators. General Applications For remote control of any quarter turn application, for example Ball, Butterfly or
Pressure Compensated Flow Control Valves SRVR/SRVRP
Pressure Compensated Flow Control Valves /P up to 210 bar up to 160 l/min Type 1. DESCRIPTION 1.1. GENERAL flow control valves with check function are, in accordance with DIN-ISO 1219, valves for oil hydraulic
Check valves H/HA/HB/HGL
Check valves H/HA/HB/HGL q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
PWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K7 Revision No: 1 This is to certify: That the Safety Valve with type designation(s) Safety valves with bellow seal, Types: 06800, 06801, 06805, 06806
MULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING
MULTI-K MULTI-COUPLING TOP COAT 107 PATENT PENDING DN 10 to 19 Tailor-made according to customer s needs Compact, reliable and safe 250 bar General features: ARGUS multi-couplings, which consist of a fixed
SITRANS F flowmeters. SITRANS F R Meters for lubricating oils (distribution of mineral oils) 4/350 Siemens FI Overview
(distribution of mineral oils) Type For custody transfer use Not for custody transfer use Flow rate in l/min (USgpm) Flow rate in l/min (USgpm) Minimum Maximum Minimum Maximum Pistol-grip meter Without
VHS... Screw Flow Meter
Member of the Group VHS... Screw Flow Meter The normal transmitter with block plug already has a push pull output to serve all NPN or PNP Inputs. It supplies a square wave signal. Those transducers are
Doors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
TW COUPLINGS EN / DIN 28450
TW COUPLINGS EN 14420-6 / DIN 28450 A.4 STANDARD LMC s TW couplings are asymmetric couplings used for the transport of liquids, solids and gases, with the exception of liquefied gas and steam. LMC s TW
Standard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
Flow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation
Block CYLINDERS for VARIOUS DESIGN APPLICATIONS > clamping force up to 155.5 kn > operating pressure up to 500 bar > piston with internal thread > for push- and pull operation > with longitudinal and cross
Profitronic I. Technical data
Profitronic I Aluminium electronic enclosure for telecommunication and MCR technology Variable length version using profile technology Screw-down fins integrated into sides Different lid versions depending
Air Operated 3 Way Brass Ball Valve
Type: PA1302 Type: PA1312 Type: PA1322 Pneumatic actuator direct mounted Actuator fitted via mounting kit Actuator fitted via stem extension Pneumatic Actuator features: Rack and pinion construction Hard
B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
SERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO.
Ordering Data SERIES SFP SLIDES INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
SERIES: VLS. INTERCHANGE: With similar couplings MAIN APPLICATIONS. Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant
INTERCHANGE: With similar couplings MAIN APPLICATIONS Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant VLS series is the screw to connect coupling with poppet style valving,
3 PC FULL BORE BALL VALVE
Pressure (Bar) 3 PC FULL BORE BALL VALVE 3 PC FULL BORE 1000PSI STAINLESS STEEL THREADED/SOCKET WELD END BALL VALVE Feature: 3 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working
VERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
Snap-tite E / EA-Series
Snap-tite E / EA-Series eneral Purpose and Vacuum Couplings eaturing... Snap-tite quality with superior pressure and flow characteristics over the competition. Snap-tite's EA Series quick disconnect coupling
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
Series HOL-W Welded Construction Hydraulic Cylinders
Series HOL-W Welded Construction Hydraulic Cylinders Description Series HOL-W hydraulic cylinders are available in Industrial and Marine specifications, they are of a heavy duty welded construction and
Group 14. Quick Release Couplings High pressure
Group 14 Quick Release s High pressure 14 INDEX Page Contents 2 Index 3 Technical information Tema Quick Release s Hydraulic Series 4 Tema Series 2500 for Hydraulic 5 Tema Series 3800 for Hydraulics 6
L Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
SERIES W50 TECHNICAL CATALOGUE
SERIES TECHNICAL CATALOGUE Heat-insulated building construction Series W 50 3 1 Catalogue cover 3 Catalogue pages Overview 4 Design Description 5 System Description 6 Installation Depths/Levels/Drainage
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
Tubes and stiffener sleeves Use of stiffener sleeves
Tubes and stiffener sleeves Use of stiffener sleeves very thick wall thickness not recommended thicker wall thickness decreasing pressure resistance increasing wall thickness ideal wall thickness no stiffener
patented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE General Catalogue a n d ot h e r p e n di n g
SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the
A Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
DIN 950. Spoked handwheels. d 2. l 3. d 3. l 1. Operating elements. Cast iron / Aluminium. SPECIFICATION Types
DIN 0 RoHS Cast iron / Aluminium SPECIFICATION Types Type A: without handle Type F: with fixed handle Type D: with revolving handle Bore codes Version B: without keyway Version K: with keyway Version V:
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
ACCESSORIES. Ball Vibrators, JM Series 3 Turbine Vibrators, JMT Series 5 Visual Indicators 7 Distribution Manifolds 9
Ball Vibrators, JM Series 3 Turbine Vibrators, JMT Series 5 Visual Indicators 7 Distribution Manifolds 9 1 2 BALL VIBRATORS JM SERIES General Information 1 Minimum operating pressure 2 bar (30psi). 2 Max
Installation and Maintenance Instructions for Morin MRP Pneumatic Rack and Pinion Actuators
for Morin MRP Pneumatic Rack and Pinion Actuators Introduction The Morin MRP Pneumatic Actuator is a compact, rack & pinion design, conforming to Keystone standard or direct mount standards or EN ISO 5211
Remote reading dial thermometers, version for industry
Remote reading dial thermometers, version for industry Type 313 WH, 323 TA, 333 TE and 334 KL Measuring system Nitrogen filled Type 313 WH Accuracy (EN 13190) Class 1 Case Crimped-on ring, stainless steel
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
ROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data
Application area Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires. Low-noise The use of polyamide drive heads results in very quiet running. Lateral loading
Selection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
Dust Caps Plastic with wire harness
Screw-to-connect Couplings TLX Range COUPLINGS AND NIPPLE Body Size Connection Part No. Dimension locking Weight sleeve ex Coupling Nipple Zoll Dash Description Type Standards Coupling Nipple (mm) (inch)
TELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
connecting your sound
oxtone Pro Stands oxtone Pro Stands MP-0111 (Black) 250.00 Tripod Microphone stand With Boom LA-0138 271.00 Orchestral Music Stand Height: 70-120cm Desk Size: 50x34cm LA-0116 (Black) 372.00 Heavy Duty
제품문의 : SR Tech KALLER GAS SPRING 공식공급업체 About gas springs GENERAL Page 2.1/2 Main groups of gas springs Page 2.
www.srtech.co.kr 제품문의 : SR Tech 05-966-707 KALLER GAS SPRING 공식공급업체 GENERAL Page 2./2 Main groups of gas springs Page 2./2 Overview of Models Page 2./3 LCF (Low Contact Force) Gas Spring Information Page