MARYLAND METRICS. products are available from

Transcription

1 products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA ph: (410) (800) fx: (410) (800) web: RFQ form:

2

3 Edition 2011 Quick coupling systems Right for alterations of products reserved without prior notice Technical information Page Ordering instructions 2-3 General information 4-5 Compatibility charts Technical information Low pressure Seals, Materials 6-7 Approvals, Test certificates 8 Series LP 9-34 Working pressure p max. (stat.) 100 bar. LP-032 and LP-050 not for vacuum Materials: steel, brass, aluminium stainless steel Series KL Working pressure p max. (stat.) 12 bar not for vacuum Materials: polyamide, polyacetal resin Series UF Non-interchangeable, UF-032 not for vacuum, Working pressure p max. (stat.) 40 bar Materials: brass, stainless steel Medium pressure High pressure Special series Series MD Working pressure p max. (stat.) 250 bar Vacuum in coupled position Material: steel, brass, stainless steel Series HP Working pressure p max. (stat.) 2000 bar Materials: steel, stainless steel Clean-break Series HC p max. (stat.) 650 bar, material: carbon steel Series BF p max. (stat.) 64 bar, material: stainless steel Compressed Air Safety, Type LS and LT Safety lock p max. (stat.) 12 bar Materials: brass, aluminium, carbon steel Fluidic-multi-couplings Accessories Special programme Working pressure p max. (stat.) 10 bar per element Materials: aluminium, brass, plastics Dust caps - Dust plugs Air nozzle - Air pipes Threated hose connectors, Swivel connectors 100 Selected examples Multi-coupling systems, clean break couplings with ball face, hook-in couplings, couplings with proximity switches, with PTFE seals, emergency separation couplings and many more

4 2 Mono-Couplings, Design The system of WALTHER Quick Release Self-Sealing Couplings is made up from four basic units. Thru-Type Coupling Self-Sealing Coupling Self-Sealing Adaptor Thru-Type Adaptor Self-Sealing Coupling and Self- Sealing Adaptor = sealing on both sides. Upon disconnection the valves of Self-Sealing Coupling and Self- Sealing Adaptor close simultaneously. Self-Sealing Coupling and Thru-Type Adaptor = sealing on one side. Upon disconnection the coupling valve closes. The combination of thru type coupling and self sealing adaptor is usually not available, however it can be realized for the types LP-006, -007, -012 and -019 as thru type coupling with valve opening tappet. Thru-Type coupling and Thru-Type Adaptor = full flow. Upon disconnection both sides are open. According to the nature of the application either the Self-Sealing Coupling or the Self-Sealing Adaptor can be fitted to the supply line. By insertion of the adaptor into the coupling the connection is made similar to a plug contact. As the valves are locked in the open position when coupled, the direction of flow is of no consequence. Protection rights: Many patents, registered designs and applications for patents in Germany and abroad prove the technical lead of WALTHER-Mono-Couplings, Multi-Couplings and Docking-Systems.

5 How to order Part number principle with annex for optional additional features per example of low pressure self-sealing coupling in stainless steel with additional features 3 Series or Type LP (oder LV, SP, 06, 07) KL, UF, MD (oder SG), HP etc. Nominal bore / Nominal size Technical information Kind of product or component see type sheets = self-sealing coupling = thru-type adaptor = self-sealing adaptor = thru-type coupling = dust plug = thru-type coupling with valve plunger = thru-type adaptor with valve plunger = airguns and other untypical variations = dust cap Series + nominal bore = type End connection type WR021 see part number = end connection G 1/2 A to DIN ISO 228 = 1/2 BSPP male (XX001 to XX999) = special connections) difined XX connection numbers of one type, cannot be used for other nominal bores / nominal sizes or series regarding regarding content content and number of digits variable area variable annex LP WR GL - OV - SI Material and finish see numbering key in the head of the type sheets see corrosion resistance table on page For special materials or special seal types a 4 figure identification is taken by using letter combinations from AAAA to ZZZZ Seal type NBR = FKM = EPDM = See table of characteristic features and compatibility on page for optional additional features see special technical explanations on page 5. Partly several additional features can be used at the same time, some additional features exclude others. Regarding this see explanations in the head of the individual type pages. Over the years WALTHER-PRÄZISION as specialist for quick coupling systems has been confronted with many tasks which could be solved with customized designs only. This lead to many special types besides the standardized product programme. Wherever special features of the quick coupling lead to deviations from the standard designs these are exactly defined by letter/number combinations within the Special Designs variable part number annex. A Z in this place means the connectability with the standard is maintained. When the letter Y is used, there is no possibility to connect with the standard designs. However, these special designs are not listed in this catalogue. Example for the arrangement of the letter/number combination in the variable part number annex for special designs: LP WR Z14...

6 4 Standard End s applicable to all Standard Series Please note: In case of standardised end connections, please take the max. allowable working pressure of the end connection into account when determining the working pressures. parallel (BSPP) male Part no. code end connection Walther customer s side -WR0.. - parallel (BSPP) female -WR5.. - Metric male thread with 24 sealing cone acc. to DIN 2353, also available as extended bulkhead connection for olive and swivel nut acc. to DIN EN ISO light duty series -L...- (not part of delivery) heavy duty series -S...- Metric male thread with 60 sealing cone to DIN 7631, for sealing cone to DIN 3863 and swivel nut to DIN 3870 also elongated for panel mounting -D...- BSPP male /BS VR0.. - parallel (BSPP) male, with small sealing edge to DIN profile B parallel (BSPP) male, sealing profile E to DIN for o-ring or sealing ring (not part of delivery) -WB0.. - Hose connections -WE SL0.. - conical pipe male thread NPT to US standard -NP0.. - conical pipe female thread NPT to US standard -NP5.. -

7 Optional features 5 Technical information venting valves VE It is recommended to use self sealing couplings and self sealing adaptors with venting valves for long air lines. Thus the return shock on disconnection is considerably reduced and the air escapes from the hose slowly. Strengthened springs VF It is necessary to equip self sealing couplings and self sealing adaptors with stronger valve springs if vacuum occurs in the disconnected position. Ring grips GG In some applications, e. g. in difficult locations, high operating temperature etc., additional ring grips can simplify the handling of the couplings. Ring valves RV GW version Radial safety lock When self sealing couplings and self sealing adaptors are employed under strong pulsating pressure, their durability and abrasion resistance can be improved considerably when equipping them with ring valves. These valves can not be connected with standard valves. Version for industrial gas applications. The observance of the DVGW-regulations requires particularly careful measures and special markings. Therefore, please state your request for a DVGW-certified version in your order. DVGW is the German Association for gas and water applications. Spring characteristics locking spring safety spring locking + safety spring The graph shows the locking forces P, dependent on the release movement of the sleeve for conventional couplings and couplings with additional radial safety lock. The dashdottet line shows that great locking forces are only effective with locked couplings. As soon as the locking sleeve leaves the locking positions and the additional locking device is not active any more, only the friction forces between locking and locking sleeve inside wall are effective. Couplings with radial safety lock are foolproof and easy to handle. Locking aid VH Axial safety locking device SI For easier operation the locking sleeve can be primed in retracted position. When mating both halves the locking sleeve is released and springs into locking position to the front. Thus it must not be held or hindered otherwise during this action. All couplings can be supplied with an additional axial positive safety device. Disconnection can only be effected when both locking components locking sleeve and locking ring are pulled back against spring force and turned against each other by 90. Both final positions locked and unlocked are fixed by springloaded cams. The operator can check the correct locking position, by trying to pull back the locking sleeve. This is not possible in the secured position.

8 6 Seals, Materials Extract from our tables of seals and materials. Other indications on request. The following standard seal types are availabale: NBR main properties: Resistant to oil and petrol good ageing characteristics, high abraison resistance. FKM main properties: Outstanding heat resistance performance, excellent resistanve to oils, chemicals, solvents, active oxygen and weather EPDM Ethylene Propylene main properities: HIgh mechanical strength, excellent resistance to hight and low temperatures and to active oxygen and weather good resistance to chemical media For very aggressive media special constructions with PTFE seals are available. All specifications for general information only. They apply to 1. pure substances, 2. unless otherwise indicated at room temperature, 3. for salt, acids etc. for hydrous solution of moderate concentration. The zinc plated surfaces usually used by us are free from sexavalent chrome (Cr VI). Table of resistance Table of seals fully resistant + Quality to partly resistant DIN / ISO 1629 non-resistant: steel zinc plated brass passivated ss AISI 316 ti or similar Polyamide 11/12 Polyacetal POM NBR FKM EPDM = compatible Acetate (Ethyl Acetate & Amyl Acetate) + + Acetic acid 10 % Acetone + + Acetylene (Ethyne) Aero Engine Fuel BP, ESSO, Avgas 100/130 Aero Engine Oil BP: AIRO-120, ESSO: AVIATION-120 Shell: AIRO-120, DERD 2487 DERD 2497, DTD Aero hydraulic fluid SKYDROL Air, compressed + + Air, hot up to 120 C + + Air, hot up to 200 C Alcohol + + Alum + + Alkali + + Ammonia, liquid + + Ammonium Sulphate Solution Table of resistance Table of seals fully resistant + Quality to partly resistant DIN / ISO 1629 non-resistant: steel zinc plated brass passivated ss AISI 316 ti or similar Polyamide 11/12 Polyacetal POM NBR FKM EPDM = compatible Amyl Alcohol + + Aniline Benzole Borax Butane + + Butene Butyl Alcohol Carbon Dioxide Carbon Dioxide, dry Carbon Dioxide, liquid + + Carbonic Bisulphide Chloride of Barium Chromic Acid + Citric Acid + + Creosote + + Cresol + + Cresol, Cresylic Acid Cupric Chloride Cyclohexane + + Diethylene glycol Emuslion (Water/Oil) Ether Ethyl Alcohol Ethylene Formalin + Formic Acid Frigen / Freon F Gasoline, Refined + + Gas, Blast Furnace Gas, Coal + + Gas, Coke Oven, Gas, Lighting Gas Naphtalene content Gas, Natural Gas, Town Gear Oil Glucose Glycerine + + Glycol Helium Hexane Hydrocarbone Hydrogen + + Hydrogen Gas 20 C + + Hydrogen Sulphide, Humid + + Hydrogene Sulphide, dry

9 Seals, Materials Table of resistance Table of seals fully resistant + Quality to partly resistant DIN / ISO 1629 non-resistant: Table of resistance Table of seals fully resistant + Qualityto partly resistant DIN / ISO 1629 non-resistant: 7 steel zinc plated brass passivated ss AISI 316 ti or similar Polyamide 11/12 Polyacetal POM NBR FKM EPDM = compatible + + Hydrogen Peroxide 30 % Isopropyl Alcohol Kerosene, JP Ketone, Methyl Ethyl Latex, liquid up to 130 C Lubricating Oil Lye Caustic + Lye, Hypochlorous Acid MS 60 + Lye, Pickling Magensium Carbonate Magnesium Hydroxide Magnesium Sulphate Mercury Methane Methanol Methyl Alcohol Methyl Ethyl Kentone + + Methyl Benzene Milk Naphta Naphtalene + + Naphtenic Acid + + Nitrate of Ammonium + + Nitric Acid, up to 35 % Nitrogen Nitro-Solution (no synstehtiv resin thinners) Oil, Coal Tr Oil, Crude Oil, Diesel + + Oil, Diesel up to 120 C + + Oil, Fuel up to 120 C + DF 150 R Oil, up to 200 C / up to 300 C special type Oil, Fuel 5 x 5 + Oil, Hydraulic Chlorinated Oil, Hydraulic up to 120 C Oil Linseed Oil, Mineral + + Oil, Transformer Oleic Acid Oxalic Acid Oxygen, Fat free Paraffin Paraffin, (Wax) + Pentachlorphenole steel zinc plated brass passivated ss AISI 316 ti or similar Polyamide 11/12 Polyacetal POM NBR FKM EPDM = compatible Petrol Ether Petrol + + Phenol Solution + Phosphoric Acid 10 % Potassium Cyanide + + Potassium Dichromate + + Potassium Sulphate Potassium Hydroxide Propane + + Prussic Acid + + Salt Solution + Sea Water + + Soap Solution + + Soda Solution Sodium Acetate Sodium Bicarbonate Sodium Carbonate + + Sodium Chloride + + Sodium Cyanide + + Sodium Sulphide + Steam up to 170 C + PTFE Steam, up to 250 C Sulphide of Barium + Sulphur Dioxide, Gas Sulphuret of Carbon Synthetic Resin Thinners, (no nitrosolution) + + Tar + + Tetrachloride of Titanium Toluol, dry + + Trichlorethylene Turbine Fuel BP: ATK 2494, ESSO: MIL-F-56/16, Shell: ATF Turbine Oil, ESSO: Turb-oil 1 S (MILL 7808) Vacuum (Strengthened Valve Springs) Vegetable Oils Water Distilled + Water Deionized + Water Demineralised + + Water, up to 80 C + Water, over 80 C + + Water, Cooling Xylene Resistances Approvals

10 8 Test Certificates / Approvals QA-system-certification to DIN / EN / ISO 9001 by TÜV-Rheinland Bundesanstalt für Materialforschung und -prüfung BAM, Berlin; Approval or type UF-019 for acetylene lines up to 24 bar gauge pressure. Bundesbahnzentralamt, Minden; Walther quick connect self-sealing coupling, low pressure series, for air pressure-, water- and cleaning lines. Bundesmarine/Blohm & Voss AG, Hamburg; Shock test report of the Bundesmarine/Blohm & Voss AG, Hamburg, of WALTHER quick connect self-sealing couplings, series MD, under high accelerations and shocks. Centrale Dienst der Arbeitsinspectie, S-Gravenhage; WALTHER quick connect self-sealing coupling or air-, oxygen-, acetyleneand propane lines etc. Daimler-Benz Aerospace; Approval according to quality requirements of the Federal Association of German Aerospace Industry e. V. (BDLI) to QSF-C on the basis of ISO DVGW-Forschungsstelle, Karlsruhe; Expertise for WALTHER quick connect self-sealing couplings, type LP-006, LP-007, LP-012,LP-019, SP-006, MD- 006, MD-007, MD-012 and MD-019, for use in engineered gas applcations of industry. Fachausschluß Chemie bei der Zentralstelle für Unfallverhütung des Hauptverbandes der gewerblichen Berufsgenossenschaften, Köln; WALTHER quick connect self-sealing couplings for high pressure liquid jets. Insitut für Baustoffkunde und Stahlbetonbau der Technischen Universität Braunschweig; Application of Walther quick connect self-sealing couplings, series MD and HP, in hydraulic circuits of test machines with high pressure alternations. RWTÜV Anlagentechnik GmbH, Essen; WALTHER quick connect self-sealing couplings, type and SH-004, in TÜV design approved as test connections in nuclear power stations. Schweizerische Unfallversicherungsansalt SUVA; Approval of Walpresta series LS (different nominal bores) as safety coupling in the air pressure sector. Schweizerischer Verein für Schweißtechnick, Basel; WALTHER quick connect self-sealing couplings, low pressure series non interchangeable type, as plug connection for oxygen- and burner gas lines in the welding sector. Schweizerischer Verein des Gasund Wasserfaches, SVGW, Zürich; Recommendation of WALTHER couplings type LP-019, LP-032 and LP-050 as solid and appropriate connection between blowing burner and gas line for natural gas, city gas, propane/air and liquifiedd petroleum gas up to 5 bar working pressure. Siemens AG, Zentralabteilung Reaktortechnik, Erlangen; Walther quick connect self-sealing couplings, medium pressure series, for radiaactive contaminated liquid waste and demineralized water circuits, also with particle contamination and hight temperature. Siemens AG, Unternehmensbereich KWU, Erlangen; Confirmation for production of quick connect self-sealing couplings, multicouplings and dockings systems for nuclear facilities on the basis of the QSP4a and KTA Verkehrsanlagen e.v. STUVA, Düsseldorf; Walther quick connect self-sealing couplings used in propane gas lines in underground installations (tunnel constructions). Verband für Flüssiggas e.v., Frankfurt; WALTHER quick connect self-sealing couplings used in liquified petroleum gas lines. Material certificates according to EN to 3.1 and factory certificates for quantities, parts, material certification, pressure test, leakage test up to 10-9 mbar x l/sec., funcito test, guarantee, possible against sharing of expenses. Documented production according to specification of nuclear engineering, for military use, for medical applicaations, for offshore technique etc... Special test to be agreed upon CE-Sign No special EU-manufacturer declaration is necessary for hydraulic products for the groups hose and pipe connections etc., other hydraulic fittings as well as pneumatic products for the groups screwed connections and lines. Guide line for pressure devices (DGRL) The self sealing couplings which are listed in this catalogue are not subject to the guide line for pressure devices and therefore a CE-marking shall not be carried out. Special test and approval conditions must be stated when placing an order.

11 Low Pressure Series LP 9 Nom. Type Max. static working pressure [bar/psi] C v value Cross Page bore steel brass* st. st. both sides one side section self sealing self sealing [mm 2 ] LP LP LV LP SP LP SP LP LP LP LP Performance diagrams Multiway connectors 34 * based on experience, valid up to 100 C Series LP Please note: In case of standardised end connections, please take the max. allowable working pressure of the end connection into account when determining the working pressures. The types LV-004, LP-006, SP-006, LP-007, SP-009, LP-012 and LP-019 in stainless steel (1.4404, or equal) are delivered as standard without knurling but in a smooth version (-GL/-GX) with finger grooves. Actual design differs from drawing.

12 10 Low pressure Series LP The series LP offers couplings with one side or both sides self sealing and valves in nominal bore 2.5 to 50 mm. This series is supplied in different materials and surface coatings. With the exception of types LP-032 and LP-050 the LP series is also suitable for vacuum applications (in connected condition).

13 Series LP characteristic features: - automatic lock (one hand operation) - mini coupling optional features: OV = without valve (no one hand operation) Type materials: standard: 23 = brass, nickel plated Nom. Bore 2,5 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM 11 Availability: m Short ; Medium k Long Please note the technical data on pages 2-7, and the max. working pressures on page 9 A brass nickel plated A1 A2 SW SW1 SW2 I I1 I2 d d1 d2 t n weight [g] XX M 5 m 9 26, male thread XX M 10 m 11 30, Series LP female thread XX M 5 m Self sealing couplings hose connection SL mm m 9 39, SW OD 5 m M 7 x 0, , ID 3 mm SW OD 6 m M 10 x ,5 13, , re-usable hose connection with swivel nut for plastic pipes ID 4 mm XX OD 5 A M 7 x 0, , ID 3 mm M 7 x 0, re-usable hose connection with swivel nut for plastic pipes and with counternut for bulkhead mounting, max. thickness 4 mm XX OD 6 m M 10 x ,5 13, , ID 4 mm M 10 x , XX M 5 m , male thread WR BSPP 1 / 8 ; Thru type adaptors female thread XX M 5 ; , hose connection SL mm m 29, SW OD 5 m M 7 x 0, , ID 3 mm SW OD 6 ; M 10 x , , re-usable hose connection with swivel nut for plastic pipes ID 4 mm

14 12 Series LP characteristic features: - automatic lock (one hand operation) optional features: OV = without valve Type LP-003 materials: standard: 23 = brass, nickel plated Nom. Bore 3 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Availability: m Short ; Medium k Long Please note the technical data on pages 2-7, and the max. working pressures on page 9 A/ A1 brass nickel-plated pipe od n.b. SF SF1 l l1 d d1 t n Weight [g] British standard pipe parallel (BSPP) male thread to DIN ISO 228 LP WR BSPP 1 / 8 m 14 32, male thread to DIN ISO 228 for bulkhead mounting (max. thickness 2 mm), complete with counternut LP XX BSPP 1 / 4 k , Self sealing couplings re-usable hose connection with swivel nut for plastic pipes with 24 sealing cone to DIN 2353 (light duty series L) LP SW OD 6 k 14 40,5 13, , ID 4 mm 13 M 10 x 1 LP L M 12 x 1,5 k , hose connection LP SL mm ; 14 44, male thread with 4 mm hose connection for bulkhead mounting (max. thickness 2 mm) complete with counternut LP XX mm m 17 54, , M 14 x 1,5 19 British standard pipe parallel (BSPP) male thread to DIN ISO 228 LP WR BSPP 1 / 8 m , Thru type adaptors re-usable hose connection with swivel nut for plastic pipes LP SW OD 6 k ,5 13,2 14, ID 4 mm 13 M 10 x 1 hose connection LP SL mm ;

15 Series LP characteristic features: - automatic lock (one hand operation) Type materials: standard: 23 = brass, nickel plated special materials: 1 = stainless steel / or similar Nom. Bore 3 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM 13 Availability: m Short ; Medium k Long Please note the technical data on pages 2-7, and the max. working pressures on page 9 A/ A1 brass nickel plated AISI 316 ti/ pipe od n.b. d SW d1 SW1 l l1 t n Weight [g] WR BSPP 1 / 8 m k , Series LP Self sealing couplings re-usable hose connection with swivel nut for plastic pipes WR BSPP 1 / 8 k k , SW OD 6 k k 15 14, ,8 13, ID 4 mm 13 M 10 x 1 hose connection SL mm k k , WR BSPP 1 / 8 m k 13, Self sealing adaptors re-usable hose connection with swivel nut for plastic pipes WR BSPP 1 / 8 k k 13, SW OD 6 k k 13,2 14, , ID 4 mm 13 M 10 x 1 hose connection SL mm k k 13,

16 14 Series LP optional features: OV = without valve see also type LV-004 in extended version and with non squirt feature (in stainless steel or alternatively brass passivated) Type LP-004 materials: standard: 11 = steel, zinc plated 21 = brass, passivated 23 = brass, nickel plated special materials: 31 = aluminium anodized silver 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated Availability: m Short ; Medium k Long Nom. Bore 4 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, and the max. working pressures on page 9 A/ A1 steel zincplated brass passivated brass nickel-plated pipe od n.b. d d1 SF SF1 l l1 t n Weight [g] Self sealing adaptors Self sealing couplings re-usable hose connection with swivel nut for plastic pipes hose connection re-usable hose connection with swivel nut for plastic pipes hose connection LP WR BSPP 1 / 8 m m m , LP WR BSPP 1 / 4 m m ; , LP WR BSPP 1 / 8 m m m , LP SW OD 6 m k 18 14, , ID 4 mm 13 13,5 M 10 x 1 LP SL mm ; ; LP SL mm m m m , LP WR BSPP 1 / 8 m m m LP WR BSPP 1 / 4 m m ; LP WR BSPP 1 / 8 m m m LP SW OD 6 m k 18 14, ID 4 mm 13 13,5 LP SL mm ; ; ; LP SL mm m m m Thru type adaptors metric ISO fine-pitch thread, male to DIN 13 with pitch 1,0 mm re-usable hose connection with swivel nut for plastic pipes LP WR BSPP 1 / 8 m m m 16, LP WR BSPP 1 / 4 ; ; ; 16, LP M M 10 x 1 ; ; 14, LP WR BSPP 1 / 8 ; ; ; 16, LP SW OD 6 k k 13,2 14, ID 4 mm 13 13,5 hose connection LP SL mm k k LP SL mm m ; ;

17 Series LP characteristic features: - extended version - non squirt feature - stainless steel version / or similar in smooth variant with gripping grooves instead ofknurling (-GL/-GX) Type LV-004 materials: standard: 21 = brass, passivated 01 = stainless steel / or similar Nom. Bore 4 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM 15 optional features: OV = without valve Availability: m Short ; Medium k Long Please note the technical data on pages 2-7, and the max. working pressures on page 9 A/ A1 brass passivated AISI 316 ti/ pipe od n.b. d AF d1 AF1 l l1 t n Weight [g] LV WR BSPP 1 / 8 ; k , LV WR BSPP 1 / 4 ; k , Series LP Self sealing couplings re-usable hose connection with swivel nut for plastic pipes LV WR BSPP 1 / 8 ; k , LV SW OD 6 ; 18 14, ,5 13, ID 4 mm 13 hose connection LV SL mm ; k , LV SL mm ; k , LV WR BSPP 1 / 8 ; k LV WR BSPP 1 / 4 ; k Self sealing adaptors re-usable hose connection with swivel nut for plastic pipes LV WR BSPP 1 / 8 ; k LV SW OD 6 ; 18 14, , ID 4 mm 13 M 10 x 1 hose connection LV SL mm ; k LV SL mm ; k

18 16 Series LP characteristic features: - non squirt feature - can be coupled with type KL-006 (plastic version) - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) Type LP-006 materials: standard: 11 = steel, zinc plated 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar Nom. Bore 6 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM optional features: OV = without valve SI = with additional axial safety lock (outer diameter 29 mm) VH = with locking aid special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 31 = aluminium anodized silver Availability: m Short ; Medium k Long Please note the technical data on pages 2-7, and the max. working pressures on page 9 A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] LP WR BSPP 1 / 4 m m ; k LP WR BSPP 3 / 8 m m ; k LP WR BSPP 1 / 2 m m ; k , sealing profile E to DIN for o-ring or sealing ring. LP WE BSPP 3 / 8 ; BSPP male thread to DIN ISO 228/BS 5200 LP VR BSPP 1 / 4 A A LP VR BSPP 3 / 8 A A to DIN 7631 LP D M 14 x 1,5 ; A Self sealing couplings to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S), extended thread, max. bulkhead thickness 10 mm LP DV M 14 x 1,5 A A LP L M 12 x 1,5 ; A L LP L M 14 x 1,5 m A L LP L M 16 x 1,5 m A L LP L M 18 x 1,5 A A L LP S M 16 x 1,5 A S LP S M 18 x 1,5 ; A S LP S M 20 x 1,5 ; A S LP LV M 14 x 1,5 ; A L LP XX M 16 x 1,5 A A L LP WR BSPP 1 / 4 m m m A LP WR BSPP 3 / 8 m m m A hose connection LP SL mm m m ; A LP SL mm m m ; A LP SL mm m m ; A LP SL mm m m ; A Self sealing adaptors, sealing profile E to DIN for o-ring or sealing ring. BSPP male thread to DIN ISO 228/BS 5200 LP WR BSPP 1 / 4 m m ; A LP WR BSPP 3 / 8 m m ; A LP WR BSPP 1 / 2 m m ; A LP WE BSPP 3 / 8 ; LP VR BSPP 1 / 4 k k LP VR BSPP 3 / 8 A A

19 17 Availability: m Short ; Medium k Long A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] to DIN 7631 LP D M 14 x 1,5 ; k to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm LP DV M 14 x 1,5 k k Series LP Self sealing adaptors with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S), extended thread, max. bulkhead thickness 10 mm LP L M 12 x 1,5 ; k L LP L M 14 x 1,5 m k L LP L M 16 x 1,5 m k L LP L M 18 x 1,5 k k L LP S M 16 x 1,5 k S LP S M 18 x 1,5 ; k S LP S M 20 x 1,5 ; k S LP LV M 14 x 1,5 ; k L LP XX M 16 x 1,5 k k L LP WR BSPP 1 / 4 m m m k LP WR BSPP 3 / 8 m m m k hose connection LP SL mm m m ; k LP SL mm m m ; k LP SL mm m m ; k LP SL mm m m ; k LP WR BSPP 1 / 8 m k k k 15, LP WR BSPP 1 / 4 m m ; k 15, LP WR BSPP 3 / 8 m ; k k , Thru type adaptors hose connection LP WR BSPP 1 / 8 k k k k 16, LP WR BSPP 1 / 4 m ; ; k 18, LP WR BSPP 3 / 8 m m ; k LP SL mm m ; ; k LP SL mm m m ; k LP SL mm m ; ; k LP SL mm m ; ; k

20 18 Series LP characteristic features: - stainless steel version / or similar in smooth variant with gripping grooves instead knurling (-GL/-GX) optional features: OV = without valve Type SP-006 materials: standard: 11 = steel, zinc plated 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar special materials: 31 = aluminium anodized silver 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated Availability: m Short ; Medium k Long Nom. Bore 6 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, and the max. working pressures on page 9 A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] SP WR BSPP 1 / 4 m m ; ; SP WR BSPP 3 / 8 m m ; k SP WR BSPP 1 / 2 m ; ; k , sealing profile E to DIN for o-ring or sealing ring. SP WE BSPP 3 / 8 ; BSPP male thread to DIN ISO 228/BS 5200 SP VR BSPP 1 / 4 k k SP VR BSPP 3 / 8 k k Self sealing couplings to DIN 7631 to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) SP D M 14 x 1,5 k k SP DV M 14 x 1,5 k k SP L M 12 x 1,5 ; k L SP L M 14 x 1,5 m k L SP L M 16 x 1,5 m k L SP L M 18 x 1,5 k k L SP S M 16 x 1,5 k S SP S M 18 x 1,5 ; k S SP S M 20 x 1,5 ; k S with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S), extended thread, max. bulkhead thickness 10 mm SP LV M 14 x 1,5 ; k L SP XX M 16 x 1,5 k k L SP WR BSPP 1 / 4 m m m ; SP WR BSPP 3 / 8 m ; ; k hose connection SP SL mm ; ; ; k SP SL mm m m ; ; SP SL mm ; ; ; k SP SL mm ; ; ; k Self sealing adaptors, sealing profile E to DIN for o-ring or sealing ring. BSPP male thread to DIN ISO 228/BS 5200 SP WR BSPP 1 / 4 m m ; ; SP WR BSPP 3 / 8 m m ; k SP WR BSPP 1 / 2 m ; ; k SP WE BSPP 3 / 8 ; SP VR BSPP 1 / 4 k k SP VR BSPP 3 / 8 k k

21 19 Availability: m Short ; Medium k Long A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] to DIN 7631 SP D M 14 x 1,5 k k to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm SP DV M 14 x 1,5 k k Series LP Self sealing adaptors with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S), extended thread, max. bulkhead thickness 10 mm SP L M 12 x 1,5 ; k L SP L M 14 x 1,5 m k L SP L M 16 x 1,5 ; k L SP L M 18 x 1,5 k k L SP S M 16 x 1,5 k S SP S M 18 x 1,5 ; k S SP S M 20 x 1,5 ; k S SP LV M 14 x 1,5 ; k L SP XX M 16 x 1,5 k k L SP WR BSPP 1 / 4 m m m ; SP WR BSPP 3 / 8 m ; ; k hose connection SP SL mm ; ; ; k SP SL mm m m ; ; SP SL mm ; ; ; k SP SL mm ; ; ; k SP WR BSPP 1 / 8 m ; k 15, SP WR BSPP 1 / 4 m m ; k 15, SP WR BSPP 3 / 8 m m ; k 21, Thru type adaptors SP WR BSPP 1 / 4 m ; ; k 19, SP WR BSPP 3 / 8 ; ; ; k hose connection SP SL mm m ; ; k SP SL mm m ; ; k

22 20 Series LP characteristic features: - non squirt feature - stainless steel version 1.440/ or similar in smooth variant with gripping grooves instead knurling (-GL/-GX) optional features: OV = without valve S = with additional axial safety lock (outer diameter 34 mm) VH = with locking aid Type LP-007 materials: standard: 11 = steel, zinc plated 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated Availability: m Short ; Medium k Long Nom. Bore 7 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, and the max. working pressures on page 9 A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] LP WR BSPP 3 / 8 m m ; ; LP WR BSPP 1 / 2 m m ; k , sealing profile E to DIN for o-ring or sealing ring. LP WE BSPP 3 / 8 ; BSPP male thread to DIN ISO 228/BS 5200 LP VR BSPP 3 / 8 k k Self sealing couplings to DIN 7631 to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm LP D M 16 x 1,5 k k LP DV M 16 x 1,5 k k ,5 33,5 210 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) LP L M 16 x 1,5 ; k L LP L M 18 x 1,5 ; k L LP S M 18 x 1,5 ; k S LP S M 20 x 1,5 ; k S LP WR BSPP 3 / 8 m m ; ; LP WR BSPP 1 / 2 m m ; k hose connection LP SL mm m ; ; k LP SL mm m m ; k LP SL mm m ; ; ; Self sealing adaptors, sealing profile E to DIN for o-ring or sealing ring. BSPP male thread to DIN ISO 228/BS 5200 LP WR BSPP 3 / 8 m m ; ; ,3 150 LP WR BSPP 1 / 2 m m ; k ,3 170 LP WE BSPP 3 / 8 ; ,3 170 LP VR BSPP 3 / 8 k k ,3 150

23 21 Availability: m Short ; Medium k Long A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] to DIN 7631 LP D M 16 x 1,5 k k ,3 150 Series LP Self sealing adaptors to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) LP DV M 16 x 1,5 k k ,5 33,5 23,3 160 LP L M 16 x 1,5 ; k L ,3 140 LP L M 18 x 1,5 ; k L ,3 140 LP S M 18 x 1,5 ; k S ,3 150 LP S M 20 x 1,5 ; k S ,3 150 LP WR BSPP 3 / 8 m m ; ; ,3 160 LP WR BSPP 1 / 2 m m ; k ,3 180 hose connection LP SL mm m ; ; k ,3 150 LP SL mm m m ; k ,3 150 LP SL mm m m ; ; ,3 160 LP WR BSPP 1 / 4 m k k k 18, , ,3 35 LP WR BSPP 3 / 8 m k k k , ,3 45 LP WR BSPP 1 / 2 m m ; k 26, , ,3 70 Thru type adaptors LP WR BSPP 1 / 4 m k k k 18, , ,3 37 LP WR BSPP 3 / 8 ; ; ; k , ,3 55 LP WR BSPP 1 / 2 m ; ; k , ,3 75 hose connection LP SL mm m ; k k 14 54, ,3 29 LP SL mm m ; ; k 18 56, ,3 37 LP SL mm m ; ; k 18 56, ,3 46

24 22 Series LP characteristic features: - stainless steel verson / or similar in smooth variant with gripping grooves instead knurling (-GL/-GX) optional features: OV = without valve Type SP-009 materials: standard: 11 = steel, zinc plated 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated Availability: m Short ; Medium k Long Nom. Bore 9 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, and the max. working pressures on page 9 A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] British standard pipe parallel (BSPP) male thread to DIN ISO 228 SP WR BSPP 3 / 8 m m k k SP WR BSPP 1 / 2 m m k k Self sealing couplings British standard pipe parallel (BSPP) female thread to DIN ISO 228 SP WR BSPP 1 / 2 m m k k hose connection SP SL mm m m k k British standard pipe parallel (BSPP) male thread to DIN ISO 228 SP WR Z02 BSPP 3 / 8 m m k k , ,5 120 SP WR Z02 BSPP 1 / 2 m m k k , ,5 130 Self sealing adaptors British standard pipe parallel (BSPP) female thread to DIN ISO 228 SP WR Z02 BSPP 1 / 2 m m k k , ,5 140 hose connection SP SL Z02 13 mm m m k k , ,5 130

25 23 Availability: m Short ; Medium k Long A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] SP WR BSPP 3 / 8 m ; k k 21, , ,5 40 SP WR BSPP 1 / 2 m ; k k , ,5 60 Series LP Thru type adaptors SP WR BSPP 1 / 2 m k k k ,5 75 hose connection SP SL mm k m k k ,5 37

26 24 Series LP characteristic features: - non squirt feature - can be coupled with type KL-012 (plastic version) - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) Type LP-012 materials: standard: 11 = steel, zinc plated 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar Nom. Bore 12 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM optional features: OV = without valve SI = with additional axial safety lock (outer diameter 44 mm) VH = with locking aid special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated Availability: m Short ; Medium k Long Please note the technical data on pages 2-7, and the max. working pressures on page 9 A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] LP WR BSPP 1 / 2 m m ; k LP WR BSPP 3 / 4 m ; ; k LP WR BSPP 1 m k k k , sealing profile E to DIN for o-ring or sealing ring. LP WE BSPP 1 / 2 ; BSPP male thread to DIN ISO 228/BS 5200 LP VR BSPP 1 / 2 ; k LP VR BSPP 3 / 4 ; k Self sealing couplings to DIN 7631 to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm LP D M 18 x 1,5 ; LP D M 22 x 1,5 ; k LP DV M 22 x 1,5 k k with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) LP L M 18 x 1,5 ; k L LP L M 22 x 1,5 ; k L LP S M 24 x 1,5 ; k S LP WR BSPP 1 / 2 m m ; k LP WR BSPP 3 / 4 m m ; ; hose connection LP SL mm m ; ; k LP SL mm m ; ; k Self sealing adaptors, sealing profile E to DIN for o-ring or sealing ring. BSPP male thread to DIN ISO 228/BS 5200 LP WR BSPP 1 / 2 m m k k ,5 290 LP WR BSPP 3 / 4 ; ; k k ,5 320 LP WR BSPP 1 m k k k ,5 380 LP WE BSPP 1 / 2 ; ,5 300 LP VR BSPP 1 / 2 ; k ,5 290 LP VR BSPP 3 / 4 ; k ,5 310

27 25 Availability: m Short ; Medium k Long A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] to DIN 7631 LP D M 18 x 1,5 ; ,5 280 LP D M 22 x 1,5 ; k ,5 290 Series LP Self sealing adaptors to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) LP DV M 22 x 1,5 k k ,5 340 LP L M 18 x 1,5 ; k L ,5 280 LP L M 22 x 1,5 ; k L ,5 290 LP S M 24 x 1,5 ; k S ,5 290 LP WR BSPP 1 / 2 m m ; k ,5 330 LP WR BSPP 3 / 4 m m ; ; ,5 310 hose connection LP SL mm m ; ; k ,5 300 LP SL mm m ; ; k ,5 320 LP WR BSPP 3 / 8 m k k k , ,5 90 LP WR BSPP 1 / 2 m ; ; k , ,5 100 LP WR BSPP 3 / 4 m m ; k , ,5 140 Thru type adaptors LP WR BSPP 1 / 2 m ; ; k , ,5 100 LP WR BSPP 3 / 4 ; k k k 35, , ,5 120 hose connection LP SL mm m m ; k ,5 70 LP SL mm m k k k ,5 75 LP SL mm m ; ; k 25 68, ,5 110

28 26 Series LP characteristic features: - non squirt feature - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) optional features: GG= with ring grips (cast aluminium) OV = without valve SI = with additional axial safety lock (outer diameter 58 mm) VH= with locking aid Type LP-019 materials: standard: 11 = steel, zinc plated 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated Availability: m Short ; Medium k Long Nom. Bore 19 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, and the max. working pressures on page 9 A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] LP WR BSPP 3 / 4 m ; ; k LP WR BSPP 1 m m ; k , sealing profile E to DIN for o-ring or sealing ring. LP WE BSPP 3 / 4 ; BSPP male thread to DIN ISO 228/BS 5200 LP VR BSPP 3 / 4 ; k LP VR BSPP 1 ; k Self sealing couplings to DIN 7631 to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm LP D M 26 x 1,5 ; k LP D M 30 x 1,5 ; k LP DV M 30 x 1,5 k k with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) LP L M 26 x 1,5 ; L LP L M 30 x 2 m k L LP S M 30 x 2 ; S LP S M 36 x 2 ; k S LP WR BSPP 3 / 4 m m ; k LP WR BSPP 1 m m ; k hose connection LP SL mm ; ; ; k LP SL mm m m ; k LP SL mm ; ; k Self sealing adaptors, sealing profile E to DIN for o-ring or sealing ring. BSPP male thread to DIN ISO 228/BS 5200 LP WR BSPP 3 / 4 m ; ; k ,5 690 LP WR BSPP 1 m m ; k ,5 720 LP WE BSPP 3 / 4 ; ,5 700 LP VR BSPP 3 / 4 ; k ,5 690 LP VR BSPP 1 ; k ,5 720

29 27 Availability: m Short ; Medium k Long A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] to DIN 7631 LP D M 26 x 1,5 ; k ,5 680 LP D M 30 x 1,5 ; k ,5 680 Series LP Self sealing adaptors to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) LP DV M 30 x 1,5 k k ,5 770 LP L M 26 x 1,5 ; L ,5 680 LP L M 30 x 2 m k L ,5 670 LP S M 30 x 2 ; S ,5 690 LP S M 36 x 2 ; k S ,5 710 LP WR BSPP 3 / 4 m m ; k ,5 740 LP WR BSPP 1 m m ; k ,5 730 hose connection LP SL mm ; ; ; k ,5 700 LP SL mm m m ; k ,5 710 LP SL mm ; ; k ,5 780 LP WR BSPP 1 / 2 ; ; ; k , ,5 210 LP WR BSPP 3 / 4 m ; ; k , ,5 220 LP WR BSPP 1 m ; ; k , ,5 260 Thru type adaptors LP WR BSPP 3 / 4 m ; ; k , ,5 240 LP WR BSPP 1 ; ; ; k , ,5 250 hose connection LP SL mm m k k k 32 68, ,5 180 LP SL mm m ; ; k 32 73, ,5 190

30 28 Series LP optional features: SI = with additional axial safety lock (outer diameter 89 mm) GG= with ring grips (cast aluminium) Type LP-032 materials: standard: 11 = steel, zinc plated 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar Nom. Bore 32 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 31 = aluminium anodized silver Availability: m Short ; Medium k Long Please note the technical data on pages 2-7, and the max. working pressures on page 9 A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] LP WR BSPP 1 1 / 2 m ; ; k LP WR BSPP 2 k k k k Self sealing couplings to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) LP D M 45 x 1,5 ; LP S M 52 x 2 ; S LP WR BSPP 1 1 / 2 m m ; k LP WR BSPP 2 ; ; ; k hose connection LP SL mm k k k k LP WR BSPP 1 1 / 2 k k k k LP WR BSPP 2 k k k k Thru type couplings LP WR BSPP 1 1 / 4 k k k k LP WR BSPP 1 1 / 2 ; k k k LP WR BSPP 2 k k k k hose connection LP SL mm k k k k

31 29 Availability: m Short ; Medium k Long A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] LP WR BSPP 1 1 / 2 m m ; k , LP WR BSPP 2 k k k k , Series LP to DIN 7631 LP D M 45 x 1,5 ; , Self sealing adaptors with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) LP S M 52 x 2 ; S , LP WR BSPP 1 1 / 2 m m ; k , LP WR BSPP 2 ; ; ; k , hose connection LP SL mm k k k k , LP WR BSPP 1 1 / 2 m k k k , LP WR BSPP 2 k k k k 72, , Thru type adaptors LP WR BSPP 1 1 / 4 m k k k LP WR BSPP 1 1 / 2 m k k k LP WR BSPP 2 k ; ; k hose connection LP SL mm k k k k

32 30 Series LP optional features: SI = with additional axial safety lock (outer diameter 116 mm) GG= with ring grips (cast aluminium) Type LP-050 materials: standard: 11 = steel, zinc plated 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar Nom. Bore 50 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 31 = aluminium anodized silver Availability: m Short ; Medium k Long Please note the technical data on pages 2-7, and the max. working pressures on page 9 A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] LP WR BSPP 2 ; k k k LP WR BSPP 2 1 / 2 k Self sealing couplings with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) LP L M 52 x 2 ; L LP WR BSPP 2 ; k k k LP WR BSPP 2 1 / 2 ; k k k Thru type couplings LP WR BSPP 2 k k k k , LP WR BSPP 2 1 / 2 k k k , LP WR BSPP 2 ; k k , LP WR BSPP 2 1 / 2 k ,

33 31 Availability: m Short ; Medium k Long A steel zinc plated brass passivated brass chrome plated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] LP WR BSPP 2 ; k k k LP WR BSPP 2 1 / 2 k Series LP Self sealing adaptors with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) LP L M 52 x 2 ; L LP WR BSPP 2 ; k k k LP WR BSPP 2 1 / 2 ; k k k LP WR BSPP 2 m k k Thru type adaptors LP WR BSPP 2 m k k hose connection LP SL mm k k k

34 32 Series LP Performance Diagram Medium Water Measurement of flow coefficients Cv Flow speeds of 8 m/sec according to DIN EN should not be exceeded 1 bar = 14,5 PSI Both sides self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar Flow Q in m 3 /h in l/min } at ϑ = 18 C One side self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar Flow Q in m 3 /h in l/min } at ϑ = 18 C

35 Series LP Performance Diagram Medium Air Measurement of flow coefficients Cv Working pressure 6 bar according to DIN EN gauge pressure 33 1 bar = 14,5 PSI Flow Q in m 3 /h bei ϑ = 20 C Both sides self sealing Pressure Drop Δ p = p 1 p 2 in bar Pressure Drop Δ p = p 1 p 2 in bar Pressure Drop Δ p = p 1 p 2 in bar Pressure Drop Δ p = p 1 p 2 in bar Series LP Flow Q in m 3 /h bei ϑ = 20 C One side self sealing

36 34 Series LP Multi way connectors materials: standard: 11 = steel, zinc plated special materials: 21 = brass, passivated 01 = stainless steel / or similar 50 = polyamide 11/12, grey (PA) seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Availability: m Short ; Medium k Long equipped with steel zinc-plated D n.b. d d1 l l1 l2 l3 l4 Weight [g] thread to DIN ISO 228 and 2 self sealing couplings 2R WR / 8 BSPP, k , ssc LP-006 2R WR / 2 BSPP, k ssc LP-007 2R WR BSPP, k ssc LP thru type adaptors and 2 self sealing couplings, type LP-006 2S WR tta, 2ssc, LP-006 k ,

37 Low Pressure Series KL 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006 polyamide 11/ grey (PA) 12 KL-012 polyacetal grey (POM) 30 KL-030 polyacetal resin (POM) Series KL Threaded hose connectors, double and reducing connectors 38 Performance diagrams Materials: other materials e. g. PVDF, PP,... as special types on request

38 36 Series KL characteristic features: - can be coupled with type LP-006 special version: Z14 = self sealing couplings and self sealing adaptors in polypropylene (PP) anthracite (p max. static 3 bar at 20 C) Type KL-006 materials: standard: 50 = polyamide 11/12, grey (PA) special materials: other materials as special types on request Nom. Bore 6 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM optional features: OV = without valve SI = with additional axial safety lock (outer diameter 29 mm) Availability: m Short ; Medium k Long Please note the technical data on pages 2-7, and the max. working pressures on page 35 PA grey A d SW l t n weight [g] Self sealing couplings British standard pipe parallel (BSPP) male thread to DIN ISO 228 British standard pipe parallel (BSPP) female thread to DIN ISO 228 hose connection KL WR BSPP 1 / 4 m , KL WR BSPP 3 / 8 m , KL WR BSPP 1 / 2 m , KL WR BSPP 1 / 4 m , KL WR BSPP 3 / 8 m , KL SL mm m , KL SL mm m , KL SL mm m , KL SL mm m , British standard pipe parallel (BSPP) male thread to DIN ISO 228 KL WR BSPP 1 / 4 m , KL WR BSPP 3 / 8 m , KL WR BSPP 1 / 2 m , Thru type adaptors Self sealing adaptors British standard pipe parallel (BSPP) female thread to DIN ISO 228 hose connection British standard pipe parallel (BSPP) male thread to DIN ISO 228 British standard pipe parallel (BSPP) female thread to DIN ISO 228 hose connection KL WR BSPP 1 / 4 m , KL WR BSPP 3 / 8 m , KL SL mm m , KL SL mm m , KL SL mm m , KL SL mm m , KL WR BSPP 1 / 8 m KL WR BSPP 1 / 4 m 20, KL WR BSPP 3 / 8 m KL WR BSPP 1 / 8 k 18, , KL WR BSPP 1 / 4 m 18, , KL SL mm m KL SL mm m KL SL mm m KL SL mm m

39 Series KL characteristic features: - can be coupled with type LP-012 special version: Z01 = for partial vacuum couplings with O-ring seal optional features: OV = without valve SI = with additional axial safety lock (outer diameter 44 mm) Type KL-012 materials: standard: 40 = polyacetal resin POM, grey SI-ring, black special materials: other materials as special types on request Availability: m Short ; Medium k Long Nom. Bore 12 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, and the max. working pressures on page PA grey A d SW l t n weight [g] Self sealing couplings British standard pipe parallel (BSPP) male thread to DIN ISO 228 British standard pipe parallel (BSPP) female thread to DIN ISO 228 hose tailpiece with hose nozzle KL WR BSPP 1 / 2 m KL WR BSPP 3 / 4 k KL WR BSPP 1 / 2 m 30 82, KL WR BSPP 3 / 4 k 30 84, KL SL mm m KL SL mm m Series KL British standard pipe parallel (BSPP) male thread to DIN ISO 228 KL WR BSPP 1 / 2 m ,5 60 KL WR BSPP 3 / 4 k ,5 60 Self sealing adaptors British standard pipe parallel (BSPP) female thread to DIN ISO 228 hose tailpiece with hose nozzle KL WR BSPP 1 / 2 m , ,5 55 KL WR BSPP 3 / 4 k , ,5 60 KL SL mm m ,5 58 KL SL mm m ,5 62 British standard pipe parallel (BSPP) male thread to DIN ISO 228 KL WR BSPP 1 / 2 m 33, , ,5 17 KL WR BSPP 3 / 4 k 33, , ,5 23 Thru type adaptors British standard pipe parallel (BSPP) female thread to DIN ISO 228 hose tailpiece with hose nozzle KL WR BSPP 1 / 2 k 33, ,5 18 KL WR BSPP 3 / 4 k 33, ,5 23 KL SL mm m KL SL mm m 21 69, ,5 13 KL SL mm k 25 68, ,5 18

40 38 Series KL optional features: OV = without valve Type KL-030 materials: standard: 40 = polyacetal resin POM, grey, black 43 = polyacetal resin POM, olive special materials: other materials as special types on request Nom. Bore 30 mm seal qualitities: 1 = NBR 2 = FPM 4 = EPDM Please note the technical data on pages 2-7, and the max. working pressures on page 35 A POM grey POM olive d SW l t n Weight [g] Self sealing couplings KL WR BSPP 1 1 / 2 m ,5 330 KL WR BSPP 2 k Thru type couplings KL WR BSPP 1 1 / 2 k KL XX round k thread for Vacuflexhoses Self sealing adaptors KL WR BSPP 1 1 / 2 m , KL WR BSPP 2 k Thru type adaptors KL WR BSPP 1 1 / 2 ; KL XX i. hexagon k AF 36,4 inner cone d1 t d2 d3 l1 l2 SW n. b. Threaded hose connectors 5-AN0-0SL-025-WR BSPP 1 1 / 2 ; AN0-0SL-032-WR BSPP 1 1 / 2 ; AN0-0SL-042-WR BSPP 1 1 / 2 ; Reducing connectors 5-AN0-0XX-008-WR BSPP 1 1 / 2 ; G ,

41 Series KL Performance Diagram Medium Water Measurement of flow coefficients Cv Flow speeds of 8 m/sec according to DIN EN should not be exceeded 39 1 bar = 14,5 PSI Flow Q in m 3 /h in l/min } at ϑ = 18 C Both sides self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar Series KL Flow Q in m 3 /h in l/min } at ϑ = 18 C One side self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar

42 40 Series KL Performance Diagram Medium Air Measurement of flow coefficients Cv Working pressure 6 bar according to DIN EN gauge pressure 1 bar = 14,5 PSI Flow Q in m 3 /h bei ϑ = 20 C Both sides self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar One side self sealing Flow Q in m 3 /h bei ϑ = 20 C both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar

43 Low Pressure Series UF Couplings with various fitting shapes Due to differently shaped guide components (triangular, square, round) of coupling and adaptor only coupling halves with the same fitting may be connected. Other fitting shapes on request Colour / character markings on request 41 Nom. Type Max. static working pressure C v value Cross section Page bore brass and st. st. [bar/psi]* both sides one side for liquids for gases self sealing self sealing [mm 2 ] 6 UF / / UF / / UF / / UF / / UF / / Performance diagrams Series UF * based on experience, valid up to 100 C Please note: In case of standardised end connections, please take the max. allowable working pressure of the end connection into account when determining the working pressures. The types UF-006, UF-007, UF-012 und UF-019 in stainless steel (1.4404, or equal) are delivered as standard without knurling but in a smooth version (-GL/-GX) with finger grooves. Actual design differs from drawing.

44 42 Series UF characteristic features:...dr = with triangular fitting...vi = with square fitting (non-interchangeable versions) special keys on request - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) optional features: OV = without valve SI = with additional axial safety lock (outer diameter 29 mm) Type UF-006 materials: standard: 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar special materials: 24 = brass, chem. nickel plated 31 = aluminium anodized silver Availability: m Short ; Medium k Long Nom. Bore 6 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, and the max. working pressures on page 41 brass passivated brass chrome plated AISI 316 ti/ A d SW l t n weight [g] Self sealing couplings thread to DIN ISO 228 thread to DIN ISO 228 hose connection UF WR DR BSPP 1 / 4 m m k UF WR VI BSPP 1 / 4 m m k UF WR DR BSPP 3 / 8 m ; k UF WR VI BSPP 3 / 8 m ; k UF WR DR BSPP 1 / 2 ; ; k UF WR VI BSPP 1 / 2 ; ; k UF WR DR BSPP 1 / 4 m ; k UF WR VI BSPP 1 / 4 m ; k UF WR DR BSPP 3 / 8 ; ; k UF WR VI BSPP 3 / 8 m m k UF SL DR 6 mm ; ; k UF SL VI 6 mm ; ; k UF SL DR 9 mm m m k UF SL VI 9 mm m m k UF SL DR 11 mm ; ; k UF SL VI 11 mm ; ; k UF SL DR 13 mm ; ; k UF SL VI 13 mm ; ; k Thru type adaptors Self sealing adaptors thread to DIN ISO 228 thread to DIN ISO 228 hose connection thread to DIN ISO 228 thread to DIN ISO 228 hose connection UF WR DR BSPP 1 / 4 m ; k ,1 90 UF WR VI BSPP 1 / 4 m ; k ,1 90 UF WR DR BSPP 3 / 8 m ; k ,1 100 UF WR VI BSPP 3 / 8 m ; k ,1 100 UF WR DR BSPP 1 / 2 ; ; k ,1 120 UF WR VI BSPP 1 / 2 ; ; k ,1 120 UF WR DR BSPP 1 / 4 m ; k ,1 95 UF WR VI BSPP 1 / 4 m ; k ,1 95 UF WR DR BSPP 3 / 8 ; ; k ,1 100 UF WR VI BSPP 3 / 8 ; ; k ,1 100 UF SL DR 6 mm ; ; k ,1 85 UF SL VI 6 mm ; ; k ,1 85 UF SL DR 9 mm m ; k ,1 90 UF SL VI 9 mm m ; k ,1 90 UF SL DR 11 mm ; ; k ,1 95 UF SL VI 11 mm ; ; k ,1 95 UF SL DR 13 mm ; ; k ,1 110 UF SL VI 13 mm ; ; k ,1 110 UF WR DR BSPP 1 / 4 k k k 18, , ,1 29 UF WR VI BSPP 1 / 4 k k k 18, , ,1 29 UF WR DR BSPP 3 / 8 k k k , ,1 41 UF WR VI BSPP 3 / 8 k k k , ,1 41 UF WR DR BSPP 1 / 4 k k k 18, , ,1 31 UF WR VI BSPP 1 / 4 k k k 18, , ,1 31 UF SL DR 6 mm m k k 16 48, ,1 20 UF SL VI 6 mm m k k 16 48, ,1 20 UF SL DR 9 mm m k k 16 53, ,1 25 UF SL VI 9 mm m k k 16 53, ,1 25 UF SL DR 11 mm k k k 16 53, ,1 32 UF SL VI 11 mm k k k 16 53, ,1 32

45 Series UF characteristic features:...dr = with triangular fitting...vi = with square fitting (non-interchangeable versions) special keys on request - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) optional features: OV = without valve SI = with additional axial safety lock (outer diameter 34 mm) Type UF-007 materials: standard: 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar special materials: 24 = brass, chem. nickel plated Availability: m Short ; Medium k Long Nom. Bore 7 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, and the max. working pressures on page brass passivated brass chrome plated AISI 316 ti/ A d SW l t n weight [g] Self sealing couplings thread to DIN ISO 228 thread to DIN ISO 228 hose connection UF WR DR BSPP 3 / 8 ; ; ; UF WR VI BSPP 3 / 8 ; ; ; UF WR DR BSPP 1 / 2 ; ; k UF WR VI BSPP 1 / 2 ; ; k UF WR DR BSPP 3 / 8 ; ; ; UF WR VI BSPP 3 / 8 ; ; ; UF WR DR BSPP 1 / 2 ; ; k UF WR VI BSPP 1 / 2 ; ; k UF SL DR 9 mm k k k UF SL VI 9 mm k k k UF SL DR 11 mm k k k UF SL VI 11 mm k k k UF SL DR 13 mm ; ; ; UF SL VI 13 mm ; ; ; Series UF Thru type adaptors Self sealing adaptors thread to DIN ISO 228 thread to DIN ISO 228 hose connection thread to DIN ISO 228 thread to DIN ISO 228 hose connection UF WR DR BSPP 3 / 8 ; ; ; , ,5 170 UF WR VI BSPP 3 / 8 ; ; ; , ,5 170 UF WR DR BSPP 1 / 2 ; ; k , ,5 190 UF WR VI BSPP 1 / 2 ; ; k , ,5 190 UF WR DR BSPP 3 / 8 ; ; ; , ,5 180 UF WR VI BSPP 3 / 8 ; ; ; , ,5 180 UF WR DR BSPP 1 / 2 ; ; k , ,5 200 UF WR VI BSPP 1 / 2 ; ; k , ,5 200 UF SL DR 9 mm k k k , ,5 170 UF SL VI 9 mm k k k , ,5 170 UF SL DR 11 mm k k k , ,5 170 UF SL VI 11 mm k k k , ,5 170 UF SL DR 13 mm ; ; ; , ,5 180 UF SL VI 13 mm ; ; ; , ,5 180 UF WR DR BSPP 3 / 8 k k k , ,5 48 UF WR VI BSPP 3 / 8 k k k , ,5 48 UF WR DR BSPP 3 / 8 k k k ,5 60 UF WR VI BSPP 3 / 8 k k k ,5 60 UF SL DR 9 mm k k k 18 57, ,5 31 UF SL VI 9 mm k k k 18 57, ,5 31 UF SL DR 11 mm k k k 18 57, ,5 41 UF SL VI 11 mm k k k 18 57, ,5 41 UF SL DR 13 mm k k k 18 57, ,5 50 UF SL VI 13 mm k k k 18 57, ,5 50

46 44 Series UF characteristic features:...dr = with triangular fitting...vi = with square fitting (non-interchangeable versions) special keys on request - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) optional features: OV = without valve SI = with additional axial safety lock (outer diameter 44 mm) Type UF-012 materials: standard: 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar special materials: 24 = brass, chem. nickel plated Availability: m Short ; Medium k Long Nom. Bore 12 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, and the max. working pressures on page 41 brass passivated brass chrome plated AISI 316 ti/ A d SW l t n weight [g] Self sealing couplings thread to DIN ISO 228 thread to DIN ISO 228 hose connection UF WR DR BSPP 1 / 2 ; k k UF WR VI BSPP 1 / 2 ; k k UF WR DR BSPP 3 / 4 ; k k UF WR VI BSPP 3 / 4 ; k k UF WR DR BSPP 1 k k k UF WR VI BSPP 1 k k k UF WR DR BSPP 1 / 2 ; k k UF WR VI BSPP 1 / 2 ; k k UF WR DR BSPP 3 / 4 ; ; k UF WR VI BSPP 3 / 4 ; ; k UF SL DR 16 mm ; k k UF SL VI 16 mm ; k k UF SL DR 19 mm ; k k UF SL VI 19 mm ; k k Thru type adaptors Self sealing adaptors thread to DIN ISO 228 thread to DIN ISO 228 hose connection thread to DIN ISO 228 thread to DIN ISO 228 UF WR DR BSPP 1 / 2 ; k k ,5 330 UF WR VI BSPP 1 / 2 ; k k ,5 330 UF WR DR BSPP 3 / 4 ; k k ,5 360 UF WR VI BSPP 3 / 4 ; k k ,5 360 UF WR DR BSPP 1 k k k ,5 320 UF WR VI BSPP 1 k k k ,5 320 UF WR DR BSPP 1 / 2 ; k k ,5 360 UF WR VI BSPP 1 / 2 ; k k ,5 360 UF WR DR BSPP 3 / 4 ; ; k ,5 340 UF WR VI BSPP 3 / 4 ; ; k ,5 340 UF SL DR 16 mm ; k k ,5 340 UF SL VI 16 mm ; k k ,5 340 UF SL DR 19 mm ; k k ,5 360 UF SL VI 19 mm ; k k ,5 360 UF WR DR BSPP 1 / 2 k k k , ,5 110 UF WR VI BSPP 1 / 2 k k k , ,5 110 UF WR DR BSPP 1 / 2 k k k 33, , ,5 150 UF WR VI BSPP 1 / 2 k k k 33, , ,5 150 hose connection UF SL DR 16 mm k k k 25 68, ,5 95 UF SL VI 16 mm k k k 25 68, ,5 95

47 Series UF characteristic features:...dr = with triangular fitting...vi = with square fitting (non-interchangeable versions) special keys on request - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) optional features: OV = without valve SI = with additional axial safety lock (outer diameter 62 mm) Type UF-019 materials: standard: 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar special materials: 24 = brass, chem. nickel plated Availability: m Short ; Medium k Long Nom. Bore 19 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, and the max. working pressures on page brass passivated brass chrome plated AISI 316 ti/ A d SW l t n weight [g] Self sealing couplings thread to DIN ISO 228 thread to DIN ISO 228 hose connection UF WR DR BSPP 3 / 4 ; k k UF WR VI BSPP 3 / 4 ; k k UF WR DR BSPP 1 ; ; k UF WR VI BSPP 1 ; ; k UF WR DR BSPP 3 / 4 ; ; k UF WR VI BSPP 3 / 4 ; ; k UF WR DR BSPP 1 ; ; k UF WR VI BSPP 1 ; ; k UF SL DR 19 mm ; ; k UF SL VI 19 mm ; ; k UF SL DR 25 mm ; ; k UF SL VI 25 mm ; ; k UF SL DR 28 mm ; ; k UF SL VI 28 mm ; ; k Series UF Thru type adaptors Self sealing adaptors thread to DIN ISO 228 thread to DIN ISO 228 hose connection thread to DIN ISO 228 thread to DIN ISO 228 UF WR DR BSPP 3 / 4 ; k k ,5 760 UF WR VI BSPP 3 / 4 ; k k ,5 760 UF WR DR BSPP 1 ; ; k ,5 790 UF WR VI BSPP 1 ; ; k ,5 790 UF WR DR BSPP 3 / 4 ; ; k ,5 830 UF WR VI BSPP 3 / 4 ; ; k ,5 830 UF WR DR BSPP 1 ; ; k ,5 760 UF WR VI BSPP 1 ; ; k ,5 760 UF SL DR 19 mm ; ; k ,5 790 UF SL VI 19 mm ; ; k ,5 790 UF SL DR 25 mm ; ; k ,5 860 UF SL VI 25 mm ; ; k ,5 860 UF SL DR 28 mm ; ; k ,5 890 UF SL VI 28 mm ; ; k ,5 890 UF WR DR BSPP 3 / 4 k k k 45, , ,5 280 UF WR VI BSPP 3 / 4 k k k 45, , ,5 280 UF WR DR BSPP 1 k k k 45, , ,5 310 UF WR VI BSPP 1 k k k 45, , ,5 310 hose connection UF SL DR 25 mm k k k ,5 270 UF SL VI 25 mm k k k ,5 270

48 46 Series UF characteristic features:...dr = with triangular fitting...vi = with square fitting (non-interchangeable versions) special keys on request Type UF-032 materials: standard: 21 = brass, passivated 22 = brass, chrome plated 01 = stainless steel / or similar Nom. Bore 32 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM optional features: GG = with ring grips (cast aluminium) OV = without valve SI = with additional axial safety lock (outer diameter 89 mm) special materials: 24 = brass, chem. nickel plated Availability: m Short ; Medium k Long Please note the technical data on pages 2-7, and the max. working pressures on page 41 brass passivated brass chrome plated AISI 316 ti/ A d SW l t n weight [g] Self sealing couplings British standard pipe parallel (BSPP) male thread to DIN ISO 228 UF WR DR BSPP 1 1 / 2 ; k k UF WR VI BSPP 1 1 / 2 ; k k UF WR DR BSPP 2 k k k UF WR VI BSPP 2 k k k British standard pipe par- 1 / 2 ; k k UF WR DR BSPP 1 UF WR VI BSPP 1 allel (BSPP) female thread to 1 / 2 ; k k UF WR DR BSPP 2 ; k k UF WR VI BSPP 2 ; k k DIN ISO 228 hose connection UF SL DR 42 mm k k k UF SL VI 42 mm k k k UF SL DR 53 mm k UF SL VI 53 mm k Thru type adaptors Self sealing adaptors British standard pipe parallel (BSPP) male thread to DIN ISO 228 UF WR DR BSPP 1 1 / 2 ; k k , UF WR VI BSPP 1 1 / 2 ; k k , UF WR DR BSPP 2 k k k , UF WR VI BSPP 2 k k k , British standard pipe par- 1 / 2 ; k k , UF WR DR BSPP 1 UF WR VI BSPP 1 allel (BSPP) female thread to 1 / 2 ; k k , UF WR DR BSPP 2 ; k k , UF WR VI BSPP 2 ; k k , DIN ISO 228 hose connection British standard pipe parallel (BSPP) male thread to DIN ISO 228 UF SL DR 42 mm k k k , UF SL VI 42 mm k k k , UF SL DR 53 mm k , UF SL VI 53 mm k , UF WR DR BSPP 1 1 / 2 k k k 61, , UF WR VI BSPP 1 1 / 2 k k k 61, , British standard pipe parallel (BSPP) fe- 1 / 2 k k k 66, UF WR DR BSPP 1 UF WR VI BSPP 1 male thread to 1 / 2 k k k 66, DIN ISO 228 hose connection UF SL DR 42 mm k k k UF SL VI 42 mm k k k

49 Series UF Performance Diagram Medium Water 47 Non-interchangeable Measurement of flow coefficients Cv Flow speeds of 8 m/sec version according to DIN EN should not be exceeded 1 bar = 14,5 PSI Both sides self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar Series UF Flow Q in m 3 /h in l/min } at ϑ = 18 C One side self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar Flow Q in m 3 /h in l/min } at ϑ = 18 C

50 48 Series UF Performance Diagram Medium Air Non-interchangeable Measurement of flow coefficients Cv Working pressure 6 bar version according to DIN EN gauge pressure 1 bar = 14,5 PSI Flow Q in m 3 /h bei ϑ = 20 C Both sides self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar One side self sealing Flow Q in m 3 /h bei ϑ = 20 C both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar

51 Medium Pressure Series MD 49 Nom. Type Max. static working pressure Min. burst C v value Cross section Page bore [bar/psi] pressure for steel both sides one side steel brass* st. st. [bar/psi] self sealing self sealing [mm 2 ] 6 SG / / MD / / / / MD / / / / MD / / / / MD / /580 50/ / MD / /580 50/ / MD / /580 40/ / MD / /435 30/ / Performance diagrams * based on experience, valid up to 100 C Series MD Please note: In case of standardised end connections, please take the max. allowable working pressure of the end connection into account when determining the working pressures. The types MD-006, MD-007, MD-012, MD-019 and MD-025 in stainless steel (1.4404, or equal) are delivered as standard without knurling but in a smooth version (-GL/-GX) with finger grooves. Actual design differs from drawing.

52 50 Series MD optional features: OV = without valve Type SG-006 materials: standard: 19 = steel zinc plated, partially oil burnished 12 = steel, oil burnished (only valid for thru type adaptor) Nom. Bore 6 mm seal qualitities: 1 = NBR 2 = FPM 4 = EPDM special materials: 13 = steel, chem. nickel plated Availability: D Short E Medium k Long Please note the technical data on pages 2-7, 65 and the max. working pressures on page 49 A steel zinc/ oil burn. steel oil burnished series pipe OD n. b. d SW l t n weight [g] SG WR BSPP 1 / 4 m SG WR BSPP 3 / 8 m SG WR BSPP 1 / 2 ; , sealing profile E to DIN for o-ring or sealing ring. SG WE BSPP 3 / 8 ; BSPP male thread to DIN ISO 228/BS 5200 SG VR BSPP 1 / 4 k SG VR BSPP 3 / 8 k Self sealing couplings to DIN 7631 to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm SG D M 14 x 1,5 ; SG DV M 14 x 1,5 k with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) SG L M 12 x 1,5 m L SG L M 14 x 1,5 m L SG L M 16 x 1,5 m L SG L M 18 x 1,5 k L SG S M 16 x 1,5 k S SG S M 18 x 1,5 ; S SG S M 20 x 1,5 k S with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S), extended thread, max. bulkhead thickness 10 mm SG LV M 14 x 1,5 k L SG XX M 16 x 1,5 k L SG WR BSPP 1 / 4 m SG WR BSPP 3 / 8 m

53 51 Availability: D Short E Medium k Long A steel zinc/ oil burn. steel oil burnished series pipe OD n. b. d SW l t n weight [g] SG WR BSPP 1 / 4 m SG WR BSPP 3 / 8 m SG WR BSPP 1 / 2 ; Self sealing adaptors Self sealing couplings, sealing profile E to DIN for o-ring or sealing ring. BSPP male thread to DIN ISO 228/BS 5200 to DIN 7631 to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm SG WE BSPP 3 / 8 ; SG VR BSPP 1 / 4 k SG VR BSPP 3 / 8 k SG D M 14 x 1,5 ; SG DV M 14 x 1,5 k Series MD with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) SG L M 12 x 1,5 m L SG L M 14 x 1,5 m L SG L M 16 x 1,5 m L SG L M 18 x 1,5 k L SG S M 16 x 1,5 k S SG S M 18 x 1,5 ; S SG S M 20 x 1,5 k S Thru type adaptors Thru type adaptors with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S), extended thread, max. bulkhead thickness 10 mm SG LV M 14 x 1,5 k L SG XX M 16 x 1,5 k L SG WR BSPP 1 / 4 m SG WR BSPP 3 / 8 m SG WR BSPP 1 / 8 ; 15, SG WR BSPP 1 / 4 ; 19, SG WR BSPP 3 / 8 ; 21, SG WR BSPP 1 / 4 ; 19, SG WR BSPP 3 / 8 ;

54 52 Series MD characteristic features: - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) optional features: OV = without valve SI = with additional axial safety lock (outer diameter 29 mm) Type MD-006 materials: standard: 19 = steel zinc plated, partially oil burnished 21 = brass, passivated 01 = stainless steel / or similar special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 22 = brass, chrome plated Availability: D Short E Medium k Long Nom. Bore 6 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 65 and the max. working pressures on page 49 A steel zinc/ oil burn. brass passivated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] thread to DIN ISO 228, sealing profile E to DIN for o-ring or sealing ring. MD WE BSPP 3 / 8 ; thread to DIN ISO 228 MD WR BSPP 1 / 4 m ; k MD WR BSPP 3 / 8 m ; k MD WR BSPP 1 / 2 ; ; k BSPP male thread to DIN ISO 228/BS 5200 with 60 sealing cone MD VR BSPP 1 / 4 k k MD VR BSPP 3 / 8 ; k Self sealing couplings with 60 sealing cone to DIN 7631 with 60 sealing cone to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm MD D M 14 x 1,5 m k MD DV M 14 x 1,5 k with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD L M 12 x 1,5 m k L MD L M 14 x 1,5 m k L MD L M 16 x 1,5 m k L MD L M 18 x 1,5 k k L MD S M 16 x 1,5 k S MD S M 18 x 1,5 m k S MD S M 20 x 1,5 m k S with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S), extended thread, max. bulkhead thickness 10 mm MD LV M 14 x 1,5 k L MD XX M 16 x 1,5 k L MD WR BSPP 1 / 4 m ; k MD WR BSPP 3 / 8 m ; k

55 53 Availability: D Short E Medium k Long A steel zinc/ oil burn. brass passivated AISI 316 ti/ series pipe OD n. b. d SW l t n Series MD weight [g] MD WR BSPP 1 / 4 m ; k , ,7 85 MD WR BSPP 3 / 8 m ; k , ,7 90 MD WR BSPP 1 / 2 ; ; k , ,7 110, sealing profile E to DIN for o-ring or sealing ring. MD WE BSPP 3 / 8 ; ,7 127 BSPP male thread to DIN ISO 228/BS 5200 MD VR BSPP 1 / 4 k k , ,7 85 MD VR BSPP 3 / 8 ; k , ,7 95 Self sealing adaptors to DIN 7631 to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm MD D M 14 x 1,5 m k , ,7 85 MD DV M 14 x 1,5 k , ,7 100 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD L M 12 x 1,5 m k L , ,7 85 MD L M 14 x 1,5 m k L , ,7 85 MD L M 16 x 1,5 m k L , ,7 85 MD L M 18 x 1,5 k k L , ,7 85 MD S M 16 x 1,5 k S , ,7 90 MD S M 18 x 1,5 m k S , ,7 90 MD S M 20 x 1,5 m k S , ,7 100 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S), extended thread, max. bulkhead thickness 10 mm MD LV M 14 x 1,5 k L , ,7 100 MD XX M 16 x 1,5 k L , ,7 110 MD WR BSPP 1 / 4 m ; k , ,7 90 MD WR BSPP 3 / 8 m ; k , ,7 95

56 54 Series MD characteristic features: - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) optional features: OV = without valve SI = with additional axial safety lock (outer diameter 34 mm) Type MD-007 materials: standard: 19 = steel zinc plated, partially oil burnished 21 = brass, passivated 01 = stainless steel / or similar special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 22 = brass, chrome plated Availability: D Short E Medium k Long Nom. Bore 7 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 65 and the max. working pressures on page 49 A steel zinc/ oil burn. brass passivated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] MD WR BSPP 3 / 8 m ; ; MD WR BSPP 1 / 2 m ; k thread to DIN ISO 228, sealing profile E to DIN for o-ring or sealing ring. MD WE BSPP 3 / 8 ; BSPP male thread to DIN ISO 228/BS 5200 MD VR BSPP 3 / 8 k k Self sealing couplings to DIN 7631 MD D M 16 x 1,5 m k to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm MD DV M 16 x 1,5 k ,5 33,5 220 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD L M 16 x 1,5 m k L MD L M 18 x 1,5 k k L MD S M 18 x 1,5 m S MD S M 20 x 1,5 m k S MD WR BSPP 3 / 8 m ; ; MD WR BSPP 1 / 2 m ; k

57 55 Availability: D Short E Medium k Long A steel zinc/ oil burn. brass passivated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] MD WR BSPP 3 / 8 m ; ; , MD WR BSPP 1 / 2 m ; k , thread to DIN ISO 228, sealing profile E to DIN for o-ring or sealing ring. MD WE BSPP 3 / 8 ; BSPP male thread to DIN ISO 228/BS 5200 MD VR BSPP 3 / 8 k k , Series MD Self sealing adaptors to DIN 7631 MD D M 16 x 1,5 m k , to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm MD DV M 16 x 1,5 k , with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD L M 16 x 1,5 m k L , MD L M 18 x 1,5 k k L , MD S M 18 x 1,5 m S , MD S M 20 x 1,5 m k S , MD WR BSPP 3 / 8 m ; ; , MD WR BSPP 1 / 2 m ; k ,

58 56 Series MD characteristic features: - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) optional features: OV = without valve SI = with additional axial safety lock (outer diameter 44 mm) Type MD-012 materials: standard: 19 = steel zinc plated, partially oil burnished 21 = brass, passivated 01 = stainless steel / or similar special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 22 = brass, chrome plated Availability: D Short E Medium k Long Nom. Bore 12 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 65 and the max. working pressures on page 49 A steel zinc/ oil burn. brass passivated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] MD WR BSPP 1 / 2 m ; k MD WR BSPP 3 / 4 m ; k MD WR BSPP 1 ; k k , sealing profile E to DIN for o-ring or sealing ring. MD WE BSPP 1 / 2 ; BSPP male thread to DIN ISO 228/BS 5200 MD VR BSPP 1 / 2 m k MD VR BSPP 3 / 4 k k Self sealing couplings to DIN 7631 MD D M 18 x 1,5 ; MD D M 22 x 1,5 ; k to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm MD DV M 22 x 1,5 k with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD L M 18 x 1,5 m k L MD L M 22 x 1,5 m k L MD S M 24 x 1,5 m k S MD WR BSPP 1 / 2 m ; k MD WR BSPP 3 / 4 m ; ;

59 57 Availability: D Short E Medium k Long A steel zinc/ oil burn. brass passivated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] thread to DIN ISO 228 MD WR BSPP 1 / 2 m ; k ,5 300 MD WR BSPP 3 / 4 m ; k ,5 330 MD WR BSPP 1 ; k k ,5 390 thread to DIN ISO 228, sealing profile E to DIN for o-ring or sealing ring. MD WE BSPP 1 / 2 ; ,5 310 BSPP male thread to DIN ISO 228/BS 5200 with 60 sealing cone MD VR BSPP 1 / 2 m k ,5 300 MD VR BSPP 3 / 4 k k ,5 320 Series MD Self sealing adaptors to DIN 7631 MD D M 18 x 1,5 ; ,5 290 MD D M 22 x 1,5 ; k ,5 300 to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm MD DV M 22 x 1,5 k ,5 350 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD L M 18 x 1,5 m k L ,5 290 MD L M 22 x 1,5 m k L ,5 300 MD S M 24 x 1,5 m k S ,5 310 thread to DIN ISO 228 MD WR BSPP 1 / 2 m ; k ,5 340 MD WR BSPP 3 / 4 m ; ; ,5 320

60 58 Series MD characteristic features: - stainless steel version / or similar in smooth variant with gripping grooves instead of knurling (-GL/-GX) optional features: GG = with ring grips (cast aluminium) OV = without valve SI = with additional axial safety lock (outer diameter 58 mm) Type MD-019 materials: standard: 19 = steel zinc plated, partially oil burnished 21 = brass, passivated 01 = stainless steel / or similar special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 22 = brass, chrome plated Availability: D Short E Medium k Long Nom. Bore 19 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 65 and the max. working pressures on page 49 A steel zinc/ oil burn. brass passivated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] MD WR BSPP 3 / 4 m ; k MD WR BSPP 1 m ; k thread to DIN ISO 228, sealing profile E to DIN for o-ring or sealing ring. MD WE BSPP 3 / 4 ; BSPP male thread to DIN ISO 228/BS 5200 MD VR BSPP 3 / 4 ; k MD VR BSPP 1 ; k Self sealing couplings to DIN 7631 MD D M 26 x 1,5 ; k MD D M 30 x 1,5 ; k to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm MD DV M 30 x 1,5 k with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD L M 26 x 1,5 ; k L MD L M 30 x 2 m k L MD S M 30 x 2 m S MD S M 36 x 2 m k S MD WR BSPP 3 / 4 m ; k MD WR BSPP 1 m ; k

61 59 Availability: D Short E Medium k Long A steel zinc/ oil burn. brass passivated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] MD WR BSPP 3 / 4 m ; k ,5 710 MD WR BSPP 1 m ; k ,5 740, sealing profile E to DIN for o-ring or sealing ring. MD WE BSPP 3 / 4 ; ,5 720 BSPP male thread to DIN ISO 228/BS 5200 MD VR BSPP 3 / 4 ; k ,5 710 MD VR BSPP 1 ; k ,5 740 Series MD Self sealing adaptors to DIN 7631 MD D M 26 x 1,5 ; k ,5 700 MD D M 30 x 1,5 ; k ,5 700 to DIN 7631, extended thread for bulkhead mounting, max. thickness 10 mm MD DV M 30 x 1,5 k ,5 790 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD L M 26 x 1,5 ; L ,5 700 MD L M 30 x 2 m k L ,5 700 MD S M 30 x 2 m S ,5 720 MD S M 36 x 2 m k S ,5 740 MD WR BSPP 3 / 4 m ; k ,5 770 MD WR BSPP 1 m ; k ,5 750

62 60 Series MD characteristic features: - stainless steel verson / or similar in smooth variant with gripping grooves instead knurling (-GL/-GX) optional features: GG = with ring grips (cast aluminium) OV = without valve SI = with additional axial safety lock (outer diameter 58 mm) Type MD-025 materials: standard: 19 = steel zinc plated, partially oil burnished 21 = brass, passivated 01 = stainless steel / or similar special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 22 = brass, chrome plated Availability: D Short E Medium k Long Nom. Bore 25 mm seal qualitities: 1 = NBR 2 = FPM 4 = EPDM Please note the technical data on pages 2-7, 65 and the max. working pressures on page 49 A steel zinc/ oil burn. brass passivated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] MD WR BSPP 1 1 / 2 ; k k Self sealing couplings BSPP male thread to DIN ISO 228/BS 5200 to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD VR BSPP 1 1 / 2 ; k MD D M 38 x 1,5 ; k MD S M 42 x 2 ; k S MD WR BSPP 1 1 / 2 ; k k , MD WR BSPP 1 1 / 2 ; k k BSPP male thread to DIN ISO 228/BS 5200 MD VR BSPP 1 1 / 2 ; k Self sealing adaptors to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD D M 38 x 1,5 ; k MD S M 42 x 2 ; k S MD WR BSPP 1 1 / 2 ; k k ,

63 Series MD optional features: GG = with ring grips (cast aluminium) OV = without valve SI = with additional axial safety lock (outer diameter 89 mm) Type MD-032 materials: standard: 19 = steel zinc plated, partially oil burnished 21 = brass, passivated 01 = stainless steel / or similar Nom. Bore 32 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM 61 special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 22 = brass, chrome plated 31 = aluminium anodized silver Availability: D Short E Medium k Long Please note the technical data on pages 2-7, 65 and the max. working pressures on page 49 A steel zinc/ oil burn. brass passivated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] MD WR BSPP 1 1 / 2 m ; k MD WR BSPP 2 k k k Self sealing couplings to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD D M 45 x 1,5 k MD S M 52 x 2 ; S MD WR BSPP 1 1 / 2 m ; k MD WR BSPP 2 ; ; k Series MD MD WR BSPP 1 1 / 2 k k k MD WR BSPP 2 k k k Thru type couplings to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD D M 45 x 1,5 k k k MD S M 52 x 2 k k k S MD WR BSPP 1 1 / 2 k k k MD WR BSPP 2 k k k

64 62 Series MD optional features: OV = without valve Type MD-032 materials: standard: 19 = steel zinc plated, partially oil burnished 21 = brass, passivated 01 = stainless steel / or similar 12 = steel, oil burnished special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 22 = brass, chrome plated 31 = aluminium anodized silver Availability: D Short E Medium k Long Nom. Bore 32 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 65 and the max. working pressures on page 49 A steel zinc/ oil burn. brass passivated AISI 316 ti/ steel oil burnished series pipe OD n. b. d SW l t n weight [g] MD WR BSPP 1 1 / 2 m ; k , MD WR BSPP 2 k k k , Self sealing adaptors to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD D M 45 x 1,5 k , MD S M 52 x 2 ; S , MD WR BSPP 1 1 / 2 m ; k , MD WR BSPP 2 ; ; k , MD WR BSPP 1 1 / 2 k k k MD WR BSPP 2 k k k 72, Thru type adaptors to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD D M 45 x 1,5 k k k 32 61, , MD S M 52 x 2 k k k S , MD WR BSPP 1 1 / 2 k k k MD WR BSPP 2 k k k

65 Series MD optional features: GG = with ring grips (cast aluminium) OV = without valve SI = with additional axial safety lock (outer diameter 116 mm) Type MD-050 materials: standard: 19 = steel zinc plated, partially oil burnished 21 = brass, passivated 01 = stainless steel / or similar Nom. Bore 50 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM 63 special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 22 = brass, chrome plated 31 = aluminium anodized silver Availability: D Short E Medium k Long Please note the technical data on pages 2-7, 65 and the max. working pressures on page 49 A steel zinc/ oil burn. brass passivated AISI 316 ti/ series pipe OD n. b. d SW l t n weight [g] MD WR BSPP 2 ; k k MD WR BSPP 2 1 / 2 k Self sealing couplings to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD D M 65 x MD L M 52 x 2 k L MD WR BSPP 2 m k k MD WR BSPP 2 1 / 2 k k k Series MD MD WR BSPP 2 k k k , MD WR BSPP 2 1 / 2 k k k , Thru type couplings to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD D M 65 x , MD L M 52 x 2 L MD WR BSPP 2 k k k MD WR BSPP 2 1 / 2 k k k

66 64 Series MD optional features: OV = without valve Type MD-050 materials: standard: 19 = steel zinc plated, partially oil burnished 21 = brass, passivated 01 = stainless steel / or similar 12 = steel, oil burnished special materials: 13 = steel, chem. nickel plated 24 = brass, chem. nickel plated 22 = brass, chrome plated 31 = aluminium anodized silver Availability: D Short E Medium k Long Nom. Bore 50 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 65 and the max. working pressures on page 49 A steel zinc/ oil burn. brass passivated AISI 316 ti/ steel oil burnished series pipe OD n. b. d SW l t n weight [g] MD WR BSPP 2 ; k k MD WR BSPP 2 1 / 2 k Self sealing adaptors to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD D M 65 x MD L M 52 x 2 k L MD WR BSPP 2 m k k MD WR BSPP 2 1 / 2 k k k MD WR BSPP 2 k k k MD WR BSPP 2 1 / 2 k k k Thru type adaptors to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) MD D M 65 x MD L M 52 x 2 L MD WR BSPP 2 k k k MD WR BSPP 2 1 / 2 k k k

67 Series MD Performance Diagram 65 Measurement of flow coefficients Cv Flow speeds of 8 m/sec according to DIN EN should not be exceeded Flow Q in m 3 /h in l/min } at ϑ = 20 C Medium Water both sides self sealing 1 bar = 14,5 PSI both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar Series MD Flow Q in m 3 /h bei ϑ = 20 C Medium Air working pressure 6 bar gauge pressure both sides self sealing Pressure Drop Δ p = p 1 p 2 in bar Pressure Drop Δ p = p 1 p 2 in bar

68 66 Know-how: WALTHER Quick Release Coupling Systems for Nuclear Technology Examples: Two way docking system which is seismic shock proof and forms part of power supply and regulating system to Modules. WALTHER quick release coupling systems have been approved for many years Monocouplings and multicouplings are incorporated in equipment for routine applications or forming part of extremely complex

69 High Pressure Series HP 67 Nom. Type Max. static working pressure [bar/psi] Min. burst C v value Cross section Page bore / / pressure ss ss with for steel both sides one sides steel QT900 [bar/psi] self sealing self sealing [mm 2 ] / / HP / / / / HP / / / / HP / / / / HP / / / / HP / / / / HP / / / / HP / / Performance diagrams 76 Fitted hose lines, nom. bore 2.5; p. n When determining the working pressure of the coupling the max. permissible working presssure of the end connection is to be taken into account if standardized threads are used. Series HP

70 68 Series HP characteristic features: - can only be used self sealing both sides Type materials: standard: 12 = steel, oil burnished special materials: 13 = steel, chem. nickel plated Nom. Bore 2,5 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Availability: D Short E Medium k Long Please note the technical data on pages 2-7, 76 and the max. working pressures on page 67 Bestellnummer steel oil burnished A d d1 d1 SWl SW1 l1 l2 l l3 SW1 l1 SW l2 t n weight [g] Self sealing couplings British standard pipe parallel (BSPP) male thread to DIN ISO 228, screwed plug to DIN form B WB BSPP 1 / 8 ; 16, ,5 42 BSPP male thread to DIN ISO 228/BS 5200 with 60 sealing cone metric male thread with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) VR BSPP 1 / 4 ; 16, ,5 11, L M 12 x 1,5 ; 16, , Self sealing adaptors British standard pipe parallel (BSPP) male thread to DIN ISO 228, screwed plug to DIN form B WB BSPP 1 / 8 ; 16, ,5 9,5 18,5 30 BSPP male thread to DIN ISO 228/BS 5200 with 60 sealing cone metric male thread with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) VR BSPP 1 / 4 ; 16, , L M 12 x 1,5 ; 16, ,5 30 Hose lines fitted with: Self sealing coupling Self sealing coupling Self sealing coupling Self sealing adaptor Self sealing adaptor Self sealing adaptor LG self k 16, ,5 18, LG sealing k 16, ,5 18, LG coupling k 16, ,5 18, LG sealing k 16, ,5 18, LG adaptor k 16, ,5 18, LG self k 16,2 M 10 x LG sealing k 16,2 M 10 x LG coupling k 16,2 M 10 x LG thread k 16,2 M 10 x LG connection k 16,2 M 10 x LG self k 16,2 M 10 x , , LG sealing k 16,2 M 10 x , , LG adaptor k 16,2 M 10 x , , LG thread k 16,2 M 10 x , , LG connection k 16,2 M 10 x , ,5 60

71 Series HP characteristic features: - with vibration lock - with ring valve test pressure 3000 bar / PSI when using a suitable steel end connection Type HP-004 materials: standard: 12 = steel, oil burnished special materials: 13 = steel, chem. nickel plated W1 = AISI 316 ti/1.4571, adaptor front part QT = stainless steel / or similar Availability: D Short E Medium k Long Nom. Bore 4 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 76 and the max. working pressures on page steel oil burnished AISI 316 ti/ / QT900 A d SW SW1 l t n weight [g] end connection male thread G 1/4 A with 60 sealing cone HP XX BSPP 1 / 4 m k , male 60 sealing cone Self sealing couplings end connection UNF 9/16 male thread with 58 sealing cone conical pipe thread NPT, male HP XX UNF 9/16 m k , male 58 sealing cone HP NP NPT 1 / 4 ; k , conical pipe thread NPT, female HP NP NPT 1 / 4 ; k , end connection male thread G 1/4 A with 60 sealing cone HP XX BSPP 1 / 4 m k k , ,5 160 male 60 sealing cone Series HP Self sealing adaptors end connection UNF 9/16 male thread with 58 sealing cone conical pipe thread NPT, male HP XX UNF 9/16 m k k , ,5 160 male 58 sealing cone HP NP NPT 1 / 4 ; k k , ,5 160 conical pipe thread NPT, female HP NP NPT 1 / 4 ; k k , ,5 170 Thru type adaptors end connection UNF 9/16 male thread with 58 sealing cone HP XX UNF 9/16 ; k k 18, ,5 45 male 58 sealing cone

72 70 Series HP characteristic features: - with vibration lock optional features: OV = without valve SI = with additional axial safety lock (outer diameter 38 mm) RV = with ring valve (cannot be coupled with standard valve) Recommended for high pulsating pressures and rough working conditions. Type HP-006 materials: standard: 12 = steel, oil burnished special materials: 13 = steel, chem. nickel plated W1 = AISI 316 ti/1.4571, adaptor front part QT = stainless steel / or similar Availability: D Short E Medium k Long Nom. Bore 6 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 76 and the max. working pressures on page 67 A steel oil burnished AISI 316 ti/ / QT900 series pipe OD n. b. d SW l t n weight [g] BSPP male thread to DIN ISO 228/BS 5200 conical pipe thread NPT male HP VR BSPP 3 / 8 ; k , HP NP NPT 3 / 8 ; k , Self sealing couplings, screwed plug to DIN form B to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) HP WB BSPP 3 / 8 m k ,5 320 HP D M 14 x 1,5 m k , HP D M 16 x 1,5 k k , HP S M 16 x 1,5 m k S , HP S M 18 x 1,5 m k S , HP S M 20 x 1,5 m k S , conical pipe thread female HP WR BSPP 3 / 8 m k HP NP NPT 3 / 8 k k , BSPP male thread to DIN ISO 228/BS 5200 conical pipe thread NPT male HP VR BSPP 3 / 8 ; k k , ,5 210 HP NP NPT 3 / 8 ; k k , ,5 220 Self sealing adaptors, screwed plug to DIN form B to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) HP WB BSPP 3 / 8 m k k ,5 30,5 210 HP D M 14 x 1,5 m k k , ,5 190 HP D M 16 x 1,5 k k k , ,5 190 HP S M 16 x 1,5 m k k S , ,5 210 HP S M 18 x 1,5 m k k S , ,5 200 HP S M 20 x 1,5 m k k S , ,5 220 conical pipe thread female HP WR BSPP 3 / 8 m k k ,5 270 HP NP NPT 3 / 8 k k k , ,5 240 Thru type adaptors, screwed plug to DIN form B HP WB BSPP 3 / 8 m k k ,5 30,5 70

73 Series HP characteristic features: - with vibration lock optional features: OV = without valve SI = with additional axial safety lock (outer diameter 50 mm) RV = with ring valve (cannot be coupled with standard valve) Recommended for high pulsating pressures and rough working conditions. special version: 2 non-interchangeable versions Type HP-010 materials: standard: 12 = steel, oil burnished special materials: 13 = steel, chem. nickel plated W1 = AISI 316 ti/1.4571, adaptor front part QT = stainless steel / or similar Availability: D Short E Medium k Long Nom. Bore 10 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 76 and the max. working pressures on page A steel oil burnished AISI 316 ti/ / QT900 series pipe OD n. b. d SW l t n weight [g] BSPP male thread to DIN ISO 228/BS 5200 HP VR BSPP 1 / 2 ; k , Self sealing couplings, screwed plug to DIN form B to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) HP WB BSPP 1 / 2 m k , HP D M 18 x 1,5 k k , HP D M 22 x 1,5 k k , HP S M 20 x 1,5 m k S , HP S M 22 x 1,5 k k S , HP S M 24 x 1,5 m k S , conical pipe thread NPT female HP WR BSPP 1 / 2 ; k , HP NP NPT 1 / 2 k k , BSPP male thread to DIN ISO 228/BS 5200 HP VR BSPP 1 / 2 ; k k , Series HP Self sealing adaptors, screwed plug to DIN form B to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) HP WB BSPP 1 / 2 m k k , HP D M 18 x 1,5 k k k , HP D M 22 x 1,5 k k k , HP S M 20 x 1,5 m k k S , HP S M 22 x 1,5 k k k S , HP S M 24 x 1,5 m k k S , conical pipe thread NPT female HP WR BSPP 1 / 2 ; k k , HP NP NPT 1 / 2 k k k , Thru type adaptors, screwed plug to DIN form B HP WB BSPP 1 / 2 ; k k

74 72 Series HP characteristic features: - with vibration lock optional features: OV = without valve SI = with additional axial safety lock (outer diameter 62 mm) RV = with ring valve (cannot be coupled with standard valve) Recommended for high pulsating pressures and rough working conditions. Type HP-016 materials: standard: 12 = steel, oil burnished special materials: 13 = steel, chem. nickel plated W1 = AISI 316 ti/1.4571, adaptor front part QT = stainless steel / or similar Availability: D Short E Medium k Long Nom. Bore 16 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 76 and the max. working pressures on page 67 A steel oil burnished AISI 316 ti/ / QT900 series pipe OD n. b. d SW l t n weight [g] BSPP male thread to DIN ISO 228/BS 5200 HP VR BSPP 3 / 4 m k , Self sealing couplings, screwed plug to DIN form B to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) HP WB BSPP 3 / 4 m k , HP D M 22 x 1,5 k k , HP S M 24 x 1,5 m k S , HP S M 30 x 2 m k S , HP WR BSPP 3 / 4 k k , BSPP male thread to DIN ISO 228/BS 5200 HP VR BSPP 3 / 4 m k k , Self sealing adaptors, screwed plug to DIN form B to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) HP WB BSPP 3 / 4 m k k , HP D M 22 x 1,5 k k k , HP S M 24 x 1,5 m k k S , HP S M 30 x 2 m k k S , HP WR BSPP 3 / 4 k k k , Thru type adaptors, screwed plug to DIN form B HP WB BSPP 3 / 4 ; k k

75 Series HP characteristic features: - with vibration lock optional features: GG = with ring grips (cast aluminium) OV = without valve SI = with additional axial safety lock (outer diameter 68 mm) RV = with ring valve (cannot be coupled with standard valve) Recommended for high pulsating pressures and rough working conditions. Type HP-020 materials: standard: 12 = steel, oil burnished special materials: 13 = steel, chem. nickel plated W1 = AISI 316 ti/1.4571, adaptor front part QT = stainless steel / or similar Availability: D Short E Medium k Long Nom. Bore 20 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 76 and the max. working pressures on page A steel oil burnished AISI 316 ti/ / QT900 series pipe OD n. b. d SW l t n weight [g] BSPP male thread to DIN ISO 228/BS 5200 HP VR BSPP 1 k k , Self sealing couplings, screwed plug to DIN form B to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) HP WB BSPP 1 m k , HP D M 26 x 1,5 k k , HP D M 30 x 1,5 ; k , HP S M 30 x 2 k k S , HP S M 36 x 2 m k S , HP WR BSPP 1 k k BSPP male thread to DIN ISO 228/BS 5200 HP VR BSPP 1 k k k , Series HP Self sealing adaptors, screwed plug to DIN form B to DIN 7631 with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) HP WB BSPP 1 m k k , HP D M 26 x 1,5 k k k , HP D M 30 x 1,5 ; k k , HP S M 30 x 2 k k k S , HP S M 36 x 2 m k k S , HP WR BSPP 1 k k k Thru type adaptors, screwed plug to DIN form B HP WB BSPP 1 k k k

76 74 Series HP characteristic features: - with vibration lock optional features: GG = with ring grips (cast aluminium) OV = without valve SI = with additional axial safety lock (outer diameter 96 mm) RV = with ring valve (cannot be coupled with standard valve) Recommended for high pulsating pressures and rough working conditions. Type HP-032 materials: standard: 12 =steel, oil burnished special materials: 13 =steel, chem. nickel plated W1 =AISI 316 ti/1.4571, adaptor front part QT =stainless steel / or similar Availability: D Short E Medium k Long Nom. Bore 32 mm seal qualitities: 1 = NBR 2 = FPM 4 = EPDM Please note the technical data on pages 2-7, 76 and the max. working pressures on page 67 A steel oil burnished AISI 316 ti/ / QT900 series pipe OD n. b. d SW l t n weight [g], screwed plug to DIN form B HP WB BSPP 1 1 / 2 k k , HP WB BSPP 2 k k , Self sealing couplings to DIN 7631 HP D M 38 x 1,5 k k , HP D M 45 x 1,5 k k , with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) HP S M 42 x 2 ; k S , HP S M 52 x 2 ; k S , , screwed plug to DIN form B HP WB BSPP 1 1 / 2 k k k , HP WB BSPP 2 k k k , Self sealing adaptors to DIN 7631 HP D M 38 x 1,5 k k k , HP D M 45 x 1,5 k k k , with 24 sealing cone to DIN 2353 (light duty series L, heavy duty series S) HP S M 42 x 2 ; k k S , HP S M 52 x 2 ; k k S , Thru type adaptors, screwed plug to DIN form B HP WB BSPP 1 1 / 2 k k k 32 61, , ,5 690 HP WB BSPP 2 k k k , ,5 1190

77 Series HP characteristic features: - with vibration lock - with ring grips (cast aluminium) optional features: OV = without valve RV = with ring valve (cannot be coupled with standard valve) Type HP-050 materials: standard: 12 = steel, oil burnished special materials: 13 = steel, chem. nickel plated Availability: D Short E Medium k Long Nom. Bore 50 mm seal qualitities: 1 = NBR 2 = FKM 4 = EPDM Please note the technical data on pages 2-7, 76 and the max. working pressures on page steel oil burnished series pipe OD A n. b. d d1 d2 l l1 l nl2 weight (kg)[g] Self sealing couplings HP XX SAE ,3 flange for pipe OD 65 4xM20 44,5x96,8 Self sealing adaptors HP XX SAE ,5 87,5 11,4 flange for pipe OD 65 4xM20 44,5x96,8 Series HP

78 76 Series HP Performance Diagram Medium Water Measurement of flow coefficients Cv Flow speeds of 8 m/sec according to DIN EN should not be exceeded Both sides self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, unit = 100 mm Pressure Drop Δ p = p 1 p 2 in bar Flow Q in m 3 / in l/min } at ϑ = 18 C 1 bar = 14,5 PSI

79 Clean-Break high pressure series HC 77 Nom. Type Max. static working C v value Page bore pressure [bar/psi] both sides steel self sealing 6 HC-G06 650/ HC-G08 600/ HC-G12 600/ HC-G16 600/ HC-G20 600/ performance diagrams 79 Please note: In case of standardised end connections, please take the max. allowable working pressure of the end connection into account when determining the working pressures. Features: Options: Leak-free disconnection and connection without air inclusion thanks to clean break valves Splatter-free operation Locking mechanism (one-hand operation) For self-lubricating substances Z12 = Self sealing coupling and self sealing adaptor with dirt protection Z11 = Self sealing coupling and self sealing adaptor with pressure relief (starting from DN 12) Z13 = Self sealing coupling and self sealing adaptor with dirt protection and pressure relief (starting from DN 12) Serie Clean-Break

80 78 Series HC characteristic features: - automatic lock (one hand operation) - disconnection without loss of medium - connection without air inclusion Type HC-G06 - HC-G20 Nom. Bore 6-20 mm materials: standard: - steel, zinc plated, yellow chromated locking sleeve, black phosphatized seal qualitities: - special seals suitable for hydraulic fluids on mineral oil basis, HFA and HFB liquids Availability: D Short E Medium k Long Please note the technical data on pages and the 2-7, 79 max. working pressures on page 77 steel zinc plated series pipe OD A d SW l t n weight [g] HC-G06-0-S1018-AABA-Z10 M 18 x 1,5 ; S , with 24 sealing cone to DIN 2353 (heavy duty series S) HC-G06-2-S1018-AABB-Z10 M 18 x 1,5 ; S 10 30, ,4 177 HC-G08-0-S1220-AABA-Z10 M 20 x 1,5 ; S 12 42, , with 24 sealing cone to DIN 2353 (heavy duty series S) HC-G08-2-S1220-AABB-Z10 M 20 x 1,5 ; S 12 30, , ,8 220 HC-G12-0-S1624-AABB-Z10 M 24 x 1,5 ; S 16 47, , with 24 sealing cone to DIN 2353 (heavy duty series S) HC-G12-2-S1624-AABB-Z10 M 24 x 1,5 ; S 16 33, , ,5 251 HC-G16-0-S2030-AABA-Z10 M 30 x 2 ; S 20 57, , with 24 sealing cone to DIN 2353 (heavy duty series S) HC-G16-2-S2030-AABB-Z10 M 30 x 2 ; S 20 45, , HC-G20-0-S2536-AABA-Z10 M 36 x 2 ; S 25 63, , with 24 sealing cone to DIN 2353 (heavy duty series S) HC-G20-2-S2536-AABB-Z10 M 36 x 2 ; S 25 51, ,

81 Series HC Performance Diagram Medium Water Measurement of flow coefficients Cv A flow speed of 8 m/sec according to DIN EN should not be exceeded 79 Both sides self sealing both axes are scaled logarithmically, one from 1 to 100, the other one from 1 to 1000, Pressure Drop Δ p = p 1 p 2 in bar Flow Q in m 3 / in l/min } at ϑ = 20 C 1 bar = 14,5 PSI Serie Clean-Break

82 80 Clean-Break Series HC and BF Series HC (Nom. Bore 6, 8, 12, 16, 20 mm) Series BF (Nom. Bore 5, 9, 12 mm) Series BF (Nom. Bore 25, 50 mm)

83 Clean-Break Series BF 81 Nom. Type Max. static working C v value Page bore pressure [bar/psi] both sides stainless steel self sealing 5 BF /930* BF /930* BF /930* Performance diagrams 84 * Restrictions possible when using perfluorelastomer seals. Clean break coupling in stainless steel, particulary for challenging fluids or gaseous media. Highest safety standard and optimal handling through automatic lock. Can be used for both, non-lubricating media (such as demineralized water, dry gases ) as well as self-lubricating media (such as oils and soap solutions). Longterm proven for solvents, chemical fluids, thermal oils and steam. Also used for lyes, various acids and many other media. Serie Clean-Break

84 82 Series BF characteristic features: - automatic lock (one hand operation) - disconnection without loss of medium - connection without air inclusion - easy cleaning Type BF BF-012 materials: standard: 1 = stainless steel / or similar Nom. Bore 5-12 mm seal qualitities: 2 = FKM 4 = EPDM FFKM = perfluorine elastomers Availability: D Short E Medium k Long Please note the technical data on pages and the 2-7, 84 max. working pressures on page 81 AISI 316 ti/ series pipe OD A d SW l t n weight [g] BF WR BSPP 1 / 4 ; BF WR BSPP 1 / 4 ; 24, , ,5 50 BF WR BSPP 1 / 2 ; BF WR BSPP 1 / 2 ; 35, ,8 190 BF WR BSPP 3 / 4 ; BF WR BSPP 3 / 4 ; 51, ,3 17,5 54,2 440

85 Series BF Type BF-005 BF-012 Nom. Bore 5-12mm 83 Features clean break (with little spillage and air inclusion) easy cleanable smooth ball-face contour when locking sleeve is pulled back squirt-free low couple force good precentering during connection automatic lock identical female threads in for self sealing coupling and adaptor very little volume displacement from beginning of connection until point of valve opening protective caps for self sealing couplings and adaptors available ATEX version available Technical values BF-005 BF-009 BF-012 force depressurized 70 N 110 N 160 N Displacement volume until start of flow Adaptor: approx cm 3 approx cm 3 approx cm 3 Coupling: approx cm 3 approx cm 3 approx cm 3 Serie Clean-Break Displacement volume approx cm 3 approx cm 3 approx cm 3 at full couple stroke Max. pressure in 1 coupling half when connecting with max. 300 N force per adaptor (coupling 0) 64 bar / 930 psi 12 bar / 175 psi 7 bar / 100 psi per coupling (adaptor 0) 25 bar / 360 psi 6 bar / 90 psi 3 bar / 45 psi Inclusion volume during approx cm 3 approx cm 3 approx cm 3 connection Theoretical leakage volume during disconnection approx cm 3 approx cm 3 approx cm 3 for incompressable liquids

86 84 Series BF Performance Diagram Medium Water Measurement of flow coefficients Cv A flow speed of 8 m/sec should according to DIN EN not be exceeded. Both sides self sealing Pressure Drop Δ p = p 1 p 2 in bar Flow Q in l/min at 20 C

87 Compressed Air Safety LS/LT 85 Nom. bore Type Max. stat working C v value Page pressure [bar/psi] one side for Air selfsealing 6,5 LS / LS / LS-E11 12/ ,5 LT / LT / LT-E11 12/ Performance diagrams 88 The safety coupling for compressed air type LS-006 is the first coupling to work pressure controlled. It denies by a positive lock false operation. This abandons the dangerous whip effect completely. The pressurized air coupling type LT-006 is intended for use at the tool and prooves itself by very good flow characteristics. Both couplings are designed to fit on two widely spread nipple contours the Walther LP-006 and DIN (the so called Euronipple) For LS-006 use only hardened thin-type adaptors. Series LS/LT

88 86 Series LS characteristic features: - automatic lock (one hand operation) - safety unlocking (dependent on residual pressure) - connectable on adaptor contour LP and DIN (so-called Euro adaptor) Type LS-006, LS-009, LS-E11 materials: standard: - coupling housing: steel chem. nickel plated - locking sleeve: brass passivated - connecting pieces: steel, zinc plated Availability: D Short E Medium k Long Nom. Bore 7-11 mm seal qualitities: 1 = NBR Please note the technical data on pages and the 2-7, 88 max. working pressures on page 85 Connec-tion tion A steel zinc plated series pipe OD d SW l t n weight [g] LS WR013-AAAA-Z01 BSPP 1 / 4 m , LS WR017-AAAA-Z01 BSPP 3 / 8 m , LS WR021-AAAA-Z01 BSPP 1 / 2 m , LS WR513-AAAA-Z01 BSPP 1 / 4 m , LS WR517-AAAA-Z01 BSPP 3 / 8 m , LS WR521-AAAA-Z01 BSPP 1 / 2 m , hose connection LS SL009-AAAA-Z01 9 mm ; , LS SL011-AAAA-Z01 11 mm ; , LS SL013-AAAA-Z01 13 mm ; , LS WR021-AAAA BSPP 1 / 2 A ; 40, , LS WR521-AAAA BSPP 1 / 2 ; 40, , LS WR526-AAAA BSPP 3 / 4 ; 40, , hose connection LS SL013-AAAA 13 mm ; 40, , LS-E11-0-WR021-AAAA BSPP 1 / 2 ; 40, LS-E11-0-WR521-AAAA BSPP 1 / 2 ; 40, LS-E11-0-WR526-AAAA BSPP 3 / 4 ; 40, hose connection LS-E11-0-SL013-AAAA 13 mm ; 40, Further end connections on request. Suitable thru type adaptors for LS-006 are listed on page 17 (Type LP-006-1) Suitable thru type adaptors for LS-009 are listed on page 23 (Type SP-009-1) Suitable thru type adaptors for LS-E11 on request.

89 Series LT characteristic features: - connectable on adaptor contour LP and DIN (so-called Euro adaptor) - compact design - extremely low weight Type LT-006, LT-009, LT-E11 materials: standard: - coupling housing: Alu hc - locking sleeve: plastic - connecting pieces: AAAA = Alu anodized - connecting pieces: AAAF = Alu anodized Nom. Bore 7-11 mm seal qualitities: 1 = NBR 87 Availability: D Short E Medium k Long Please note the technical data on pages and the 2-7, 88 max. working pressures on page 85 brass passivated series pipe OD A d SW l t n weight [g] LT WR513-AAAF-Z07 BSPP 1 / 4 ; LT WR517-AAAF-Z07 BSPP 3 / 8 ; hose connection LT XX009-AAAF-Z07 9 mm ; LT XX011-AAAF-Z07 11 mm ; LT WR521-AAAA BSPP 1 / 2 ; LT WR526-AAAA BSPP 3 / 4 ; hose connection LT XX011-AAAA 11 mm ; LT XX013-AAAA 13 mm ; LT-E11-0-WR521-AAAA BSPP 1 / 2 ; , LT-E11-0-WR526-AAAA BSPP 3 / 4 ; , hose connection LT-E11-0-XX011-AAAA 11 mm ; , LT-E11-0-XX013-AAAA 13 mm ; , Series LS/LT Further end connections on request. Suitable thru type adaptors for LT-006 are listed on page 17 (Type LP-006-1) Suitable thru type adaptors for LT-009 are listed on page 23 (Type SP-009-1) Suitable thru type adaptors for LT-E11 on request.

90 88 Series LS/LT Performance Diagram Medium Air Measurement of flow coefficients Cv according to DIN EN 60534, test medium water 1 bar = 14,5 psi

91 Special Series Fluidic-Multicouplings 89 Number of Type Nom. bore Max. static working pressure Page connections [bar/psi] per element / / / / / and 4 10/ Accessories, individual parts 94 Applications: Pneumatic measuring, control and monotoring loops with logic circuits and/or direct valve actuation. Ready made: Ready made and tested complete assemblies as requested. Special version: With additional electrical plug elements on request With self sealing valves on request Fluidic-multicouplings

92 90 Fluidic-Multicouplings Type Availability: m Short ; Medium k Long Please note the technical data on pages 2-7 and the max. working pressure on page 89 Number of elements n.b. End connections Weight [g] Free half Quick push connection for hose od 6 mm id 4 mm LT Z30-AN straight conduit ; LT Z60-AN angled conduit ; 290 Fixed half FT Z10-AN Quick push connection for hose ; 150 od 6 mm id 4 mm Materials: Carrier plates: aluminium anodized Elements: brass nickel-plated Quick push connections: brass passivated Housing: light alloy hammergrey enamel Seals: NBR, low friction Free half Quick push connection for hose od 4 mm id 2 mm LT Z30-AO straight conduit ; LT Z60-AO angled conduit ; 280 Fixed half FT Z10-AO Quick push connection for hose ; 140 od 4 mm id 2 mm Materials: Carrier plates: aluminium anodized Elements: brass nickel-plated Quick push connections: brass passivated Housing: light alloy hammergrey enamel Seals: NBR, low friction

93 Fluidic-Multicouplings Type 90405/ Availability: m Short ; Medium k Long Please note the technical data on pages 2-7 and the max. working pressure on page 89 Number of elements n.b. End connections Weight [g] Free half Fixed part Push ferrule connection for hose od 4 mm id 2 mm straight conduit LT001-PA-1-Z30-AA Standard pattern: ; LT001-PA-1-Z30-AB U1-type pattern ; LT001-PA-1-Z30-AC U2-type pattern ; angled conduit LT001-PA-1-Z60-AA Standard pattern: ; LT001-PA-1-Z60-AB U1-type pattern ; LT001-PA-1-Z60-AC U2-type pattern ; Push ferrule connection for hose od 4 mm id 2 mm straight conduit FT002-PA-0-Z10-AA Standard pattern: ; FT002-PA-0-Z10-AB U1-type pattern ; FT002-PA-0-Z10-AC U2-type pattern ; Non-interchangeability: 3 different patterns: Standard, U1 or U2 Materials: Carrier plates: polyamide 6.6, 30 % glas fibre reinforced Plug elements: brass, nickel-plated Housings: light alloy, hammergrey enamel Seals: NBR, low friction Ferrules for push-ferrule-connections must be ordered separately. Free half Quick push connection for hose od 6 mm id 4 mm carrier plates made of polyamide LT006-PA-1-Z30-AF straight conduit ; LT006-PA-1-Z60-AF angled conduit ; 440 carrier plates made of anodized aluminium LT Z30-AF straight conduit ; LT Z60-AF angled conduit ; 520 Fixed half Fluidic-multicouplings Quick push connection for hose od 6 mm id 4 mm FT006-PA-1-Z01-AF carrier plates made of polyamide ; FT Z01-AF carrier plates made of anodized aluminium ; 310 Materials: Carrier plates: polyamide 6.6, 25 % glas fibre reinforced or aluminium anodized Plug elements: brass, nickel-plated Quick push connections: brass passivated Housings: light alloy, hammergrey enamel Seals: NBR, low friction

94 92 Fluidic-Multicouplings Type Availability: m Short ; Medium k Long Please note the technical data on pages 2-7 and the max. working pressure on page 89 Number of elements n.b. End connections Weight [g] Free half Quick push connection for hose od 4 mm id 2 mm carrier plates made of polyamide LT001-PA-1-Z30-AA straight conduit ; LT001-PA-1-Z60-AA angled conduit ; 460 carrier plates made of aluminium LT Z30-AA straight conduit ; LT Z60-AA angled conduit ; 520 Fixed half Quick push connection for hose od 4 mm id 2 mm FT001-PA-1-Z01-AA carrier plates made of polyamide ; FT Z01-AA carrier plates made of aluminium ; 300 Materials: Carrier plates: polyamide 6.6, 30 % glas fibre reinforced or aluminium anodized Plug elements: brass, nickel-plated Quick push connections: brass passivated Housings: light alloy, hammergrey enamel Seals: NBR, low friction Free half Push ferrule connection for hose od 6 mm id 4 mm LT002-PA-1-Z30-AA straight conduit ; LT002-PA-1-Z60-AA angled conduit ; 510 In case of angled conduit only 17 connections are useable Fixed half Push ferrule connection FT002-PA-0-Z01-AA for hose od 6 mm id 4 mm ; 280 Materials: Carrier plates: polyamide 6.6, 30 % glas fibre reinforced Plug elements: brass, nickel-plated Housings: light alloy, hammergrey enamel Seals: NBR, low friction Ferrules for push-ferrule-connections must be ordered separately.

95 Fluidic-Multicouplings in Modular Design Type Spezial versions: spezial codings with fluidical and electrical elements on request Free half Straight and inclined entry Number of elements Materials: Carrier plates free half: Polyamide PA 6.6, 25 % glass fibre reinforced Carrier plates fixed half: Trogamid TG 35 Retaining bar: Z 410 nickel-plated Thru Type Adaptors: brass nickel-plated Quick push connections: brass passivated Coding pins and bushes: stainless steel Housing: light alloy, hammergrey enamel Seals: NBR, low friction Availability: m Short ; Medium k Long End connections: A for flexible, numbered plastic lines, made of Rilsan od 4 mm, id 2 mm or od 4 mm id 2,7 mm B for flexible, numbered plastic lines, made of Rilsan od 6 mm, id 4 mm Free half Please note the technical data on pages 2-7 and the max. working pressure on page 89 Fixed half LT002-PA-1-Z04-AB 550 Weight [g] x Quick push connection B ; FT002-PA-1-Z03-AB LT004-PA-1-Z04-AD x Quick push connection A ; 9 x Quick push connection B FT004-PA-1-Z03-AD LT003-PA-1-Z04-AC x Quick push connection A ; 6 x Quick push connection B FT003-PA-1-Z03-AC LT005-PA-1-Z04-AE x Quick push connection A ; 3 x Quick push connection B FT005-PA-1-Z03-AE LT001-PA-1-Z04-AA 520 Fixed half 20 x Quick push connection A ; FT001-PA-1-Z03-AA 290 Fluidic-multicouplings Fluidic-Multi Connecteurs

96 94 Fluidic-Multicouplings Accessories Availability: m Short ; Medium k Long Please note the technical data on pages 2-7 and the max. working pressure on page 89 Materials Weight [g] Hose-clamp PG PG021-PCAA plastic ; 25 PG PG029-PCAA plastic ; 48 M 25 x 1, M brass nickel-plated ; 79 M 32 x 1, M brass nickel-plated ; 144 Ferrule for hose OD4/ID /510 brass nickel-plated ; 1 for hose OD6/ID /512 brass nickel-plated ; 1 Assembly tool for push ferrule connection for hose OD /550 steel, oil-burnished ; 27 for hose OD /558 steel, oil-burnished ; 43 Bridge connector Standard: LT001-PA-1-Z03-AA ; Bridge connector Version U1: for Type / 18-way LT001-PA-1-Z03-AB ; 230 Housing: Version U2: light alloy LT001-PA-1-Z03-AC hammergrey enamel ; Blind half Ferrules for push-ferrule-connections must be ordered separately. Carrier plates: Polyamide Elements: brass nickel-plated Seals: Blind half for fixed side Blind half for fixed Buna, low friction for Type / 18-way LT003-PA-1-Z03-AA ; 190 Hoselines for Fluidic-Multicouplings numbered single hose 4x1 (od 4 mm / id 2 mm) WP Soft Polyethylene ; numbers 01-06, 11-16, numbered 19-way hosebundle 4x1 (od 4 mm / id 2 mm) WP Soft Polyethylene ; numbers 01-06, 11-16, neutral bending radius: min. 170 mm Single hose 6x1 (od 6 mm / id 4 mm) WP Soft Polyethylene, ; black

97 Accessories 95 page Dust caps, Dust plugs Air blowers 94 Air guns 95 Threaded hose connectors, Revolving connectors 96 Accessoires

98 96 Plastic version Materials: Soft-PVC Polyurethane Dust caps Dust plugs Availability: m Short ; Medium k Long Materials low pressure For Series / Type medium pressure high pressure d l l1 Weight [g] Dust caps for self-sealing adaptors and thru types adaptors Polyurethane LP/LV-004 LP KU m 4 LP/LV-004 SP-006 SP KU m 5 soft-pvc LP-006 LP KU m 5 grey LP-007 LP KU m 7 LP-012 LP KU 32 33,5 m 12 LP-019 LP KU 44 37,5 m 20 soft-pvc SP-009 SP KK 25, m 16 grey chains + rings: LP-032 LP KK m 65 steel nickel-plated LP-050 LP KK 114, m 110 SG-006 SP KU m 7 MD-006 MD KU m 7 soft-pvc MD-007 MD KU m 7 grey MD-012 MD KU 32 33,5 m 11 MD-019 LP KU 44 37,5 m 20 soft-pvc MD-032 LP KK m 65 grey chains + rings: MD-050 LP KK 114, m 110 steel nickel-platedt HP-004 HP KU 23 27,5 m 7 HP-006 HP KU m 11 soft-pvc HP-010 HP KU m 16 black HP-016 HP KU m 20 HP-020 HP KU m 25 soft-pvc HP-032 HP KK m 65 grey chains + rings: HP-050 HP KK 114, m 110 steel nickel-plated Dust plugs for self-sealing couplings and thru type couplings Polyurethane LP/LV-004 LP KU m 5 soft-pvc SP-006 SP KU m 7 grey LP-006 LP KU m 8 LP-007 LP KU m 10 LP-012 LP KU m 19 LP-019 LP KU m 34 soft-pvc SP-009 SP KK m 19 grey chains + rings: LP-032 LP KK m 160 steel nickel-plated LP-050 LP KK m 240 SG-006 SP KU m 7 MD-006 MD KU m 8 soft-pvc MD-007 MD KU m 9 grey MD-012 MD KU m 19 MD-019 LP KU m 34 soft-pvc MD-032 LP KK m 160 grey chains + rings: MD-050 LP KK m 240 steel nickel-plated HP-004 HP KU 20 27,5 15,5 m 7 HP-006 HP KU m 13 soft-pvc HP-010 HP KU m 23 black HP-016 HP KU m 32 HP-020 HP KU m 40 soft-pvc HP-032 HP KK m 160 grey chains + rings: HP-050 HP KK m 240 steel nickel-plated

99 Dust caps Dust plugs pressure tight version working pressure: as matching Type Materials: Standard: 11 = steel zinc-plated 19 = steel zinc-plated/oil burnished 12 = steel oil burnished Dichtungen 1 = NBR) 2 = FKM 4 = EPDM 97 Availability: m Short ; Medium k Long Materials low pressure For Series / Type medium pressure high pressure d l l1 Weight [g] SP-006 SP ; 100 LP-006 LP ; 120 Dust caps with chain and ring for self-sealing adaptors and thru type adaptors steel LP-007 LP ; 200 zinc-plated chains + rings: LP-012 LP ; 340 steel, nickel-plated LP-019 LP ; 610 LP-032 LP ; 2150 LP-050 LP ; 4400 MD-006 MD ; 120 MD-007 MD ; 200 steel zinc-plated/ MD-012 MD ; 350 oil-burnished chains + rings: MD-019 MD ; 610 steel, nickel-plated MD-032 MD ; 2150 MD-050 MD ; 4400 HP-006 HP ; 250 steel HP-010 HP ; 400 oil-burnished chains + rings: HP-016 HP ; 870 steel, nickel-plated HP-020 HP ; 1000 HP-032 HP ; 2650 brass passivated LP-004 LP ; 36 Dust plugs with chain and ring for self-sealing couplings steel zinc-plated chains + rings: steel, nickel-plated SP-006 SP ; 60 LP-006 LP ; 75 LP-007 LP ,3 ; 70 LP-012 LP ,5 ; 110 LP-019 LP ,5 ; 200 LP-032 LP ; 580 LP-050 LP ; 1650 MD-006 MD ,7 ; 70 MD-007 MD ; 60 steel oil-burnished MD-012 MD ,5 ; 95 chains + rings: steel, MD-019 MD ,5 ; 200 nickel-plated MD-032 MD ; 520 MD-050 MD ; 1630 HP-006 HP ,5 ; 100 steel HP-010 HP ; 150 oil-burnished chains + rings: HP-016 HP ; 210 steel, nickel-plated HP-020 HP ; 250 HP-032 HP ,5 49,5 ; 570 Accessories

100 98 Blast Air Blowers pipes, nozzles, self-sealing, with lever operation, flexible Availability: m Short ; Medium k Long Material A d l t Weight [g] SL009 9 mm ; SL mm ; 180 Polyamide SL mm m SL mm ; SL mm m 220 Nozzle size 3 mm, other nozzles of 4 mm, 6 mm and 8 mm available on request Hose tailpiece SL006 6 mm m 200 Brass SL009 9 mm m 210 passivated SL mm ; SL mm ; 220 Nozzle size 2 mm, other nozzles of 2,5 mm, 3 mm, 4 mm and 5 mm available on request SL009 9 mm m 100 Soft-PVC SL mm ; SL mm ; 110 Also available with suspension hook ST006 LP ; 180 Polyamide ST007 LP ,5 23,3 ; ST012 LP ,5 29,5 ; 220 Thru type adaptor connection Nozzle size 3 mm, other nozzles of 4 mm, 6 mm and 8 mm available on request Brass ST006 LP m 220 passivated ST007 LP ,3 ; 230 Nozzle size 2 mm, other nozzles of 2,5 mm, 3 mm, 4 mm and 5 mm available on request Soft-PVC ST006 LP m ST007 LP ,5 23,3 ; 110 Also available with suspension hook

101 Airguns Materials: gun body Aluminium nozzle 1,5 mm brass nickel-plated extension piece brass nickel-plated plug connection (thru type adaptor) steel, hardened, zinc-plated hose tailpiece brass passivated 99 Availability: m Short ; Medium k Long A SW l t n d d1 Weight [g] Thru type adaptor ST006 LP ,5 12 ; ST007 LP ,5 23,3 18,9 14 ; 260 Hose tailpiece SL006 6 mm ,5 ; SL009 9 mm ,5 ; SL mm ,5 ; SL mm ,5 ; 270 Length Extension piece 45 with nut and counternut brass nickel-plated LG mm m 40 For better aiming in inaccessible LG mm places. Air consumption as m 46 regular nozzle LG mm k 60 Muffling nozzle, Aluminium M 12x1,5 Full-blow nozzle, Polyamide Muffling nozzles reduce noise substantially, without reduction of blowing force. The air consumtion is m 6 approx. 50% higher than a regular nozzle. This nozzle increases the quantity of blown air 3 or 4-fold by sucking more air. The full jet is especially suitable for blowing off large areas (e.g.drying). The air consumption m 12 is approx. like the muffling nozzle. Nozzle with air jacket, Aluminium Around the blowing jet a cone-sharper air jacket is located, m 6 which prevents recoiling of whirled up particles Accessories The protection shield, 70 mm dia, made of plastic, serves as protection for the eyes against recoiling, sharp articles. m 9 It is recommanded by associations for savety-at-work. Protection shield

102 100 Materials: 21 = brass passivated 40 = Polyacetals (POM) Threaded Hose Connectors Availability: m Short ; Medium k Long Thread Ø d1 Length t Hose Tailpiece Ø Ø Length d2 d3 l1 Total Length l2 Hexagon AF n.b. Weight [g] Threaded Hose Connector Threaded Hose Connector Material: brass passivated 5-AN0-0SL-006-WR G 1 / 8 A 8 6 7, m 10 5-AN0-0SL-009-WR G 1 / 8 A 8 8 9, m 12 5-AN0-0SL-006-WR G 1 / 4 A 9 6 7, m 15 5-AN0-0SL-009-WR G 1 / 4 A 9 8 9, m 19 5-AN0-0SL-011-WR G 1 / 4 A , m 22 5-AN0-0SL-013-WR G 1 / 4 A , m 30 5-AN0-0SL-006-WR G 3 / 8 A 9 6 7, m 21 5-AN0-0SL-009-WR G 3 / 8 A 9 8 9, m 24 5-AN0-0SL-011-WR G 3 / 8 A , m 27 5-AN0-0SL-013-WR G 3 / 8 A , m 29 5-AN0-0SL-006-WR G 1 / 2 A , m 32 5-AN0-0SL-009-WR G 1 / 2 A , m 34 5-AN0-0SL-011-WR G 1 / 2 A , m 39 5-AN0-0SL-013-WR G 1 / 2 A , m 40 5-AN0-0SL-016-WR G 1 / 2 A , m 50 5-AN0-0SL-013-WR G 1 / 2 A 14, , m 10 5-AN0-0SL-025-WR G 1 1 / 2 A m 19 5-AN0-0SL-032-WR G 1 1 / 2 A m 28 5-AN0-0SL-042-XX G 1 1 / 2 A m 33 Material: Polyacetals (POM)

103 Special Programme 101 Some examples from 300,000 variants page Ball-Face couplings, nom. bore 25 and 50 mm 103 Monocouplings with proximity switches 103 Couplings with Teflon seals 104 Hook-in couplings 104 Tear-away couplings 105 Multicouplings 106 Specialprogramme

104 102 Developing Demands

105 Special Programme 103 Ball-Face Clean-break safety couplings in stainless steel, large sizes nom. bore 25 and 50 mm (1-2 1 / 2 ) push to connect clean-break couplings size 1 to 2 1 / 2, mainly for applications in the chemical and pharmaceutical industry totally squirt free engagement and disengagement at full max. working pressure. Seperate operation of coupling connection and opening of valves by turning of handle low couple forces, because mechanical connection does not yet open valves the couplings can be used for lubricating and non lubricating media metal parts are made of stainless steel (AISI 316l) or (AISI 316ti). In combination with the seal compatibility of FKM or perfluorine seals (FFKM) in combination with PTFE a very wide range of media can be allowed couple areas are easy to clean the main seals sit in one easy to replace seal module consideration of all necessary safety aspects Couplings with Proximity Switches A control of the coupling position is possible when proximity switches are integrated into the coupling. As required the following data can be inquired and controlled: yes/no-indication of the coupled and locked state yes/no-indication of the opened state of the valves identification which od several free halves is connected with which counterpart by coding with several sensors and contacts (see drawing). By BCD-coding of the switches product processing can be checked and monitored by computers. Request further information. Special Programme

106 104 Special Programme Hook-in Couplings The thru-type adaptor with its front face seal is hooked into the slit on the coupling nut. When the nut is tightened the seal is pressed against the face of the coupling housing. This design allows a free media flow without interference from valves. The advantages of a hook-in coupling are: suitability for paste and powdery media easy cleaning of couplings extremely short design due to the low axial couple stroke also applicable for pipe lines with limited movement very easy maintenance nearly smooth inner bore without recesses, thus suitability for food because all medium touched surface can be cleaned easy and without problems (no dirt traps). Request further information. Couplings with PTFE Seals Couplings with PTFE seals have to show other constructional features as such which are outlined for elastomers to make up for the bad readjusting properties of the sealing material PTFE. The couplings of the TE-Series offer this feature and can be used for especially aggressive media media combinations which have no common elastomeric seal temperatures up to +250 C (+482 F). temperatures up to -50 C ( 58 F). Request further information.

107 Special Programme 105 Tear-away Couplings Tear-away couplings protect environment and expensive loading equipment from damage resulting from destruction of media lines at high tensile strain. Mobile facilities which are being filled, e.g. tank lorries, wagons or ships can be moved when insuffifient secured or emergency situations occur, before lines were properly disconnected. Tear-away couplings avoid damages by automatic disconnection on tensile loads, thus preserving the loading equipment from damages sealing both line sides automatically during disconnection and consequently prevent medium loss releasing alarm through integrated proximity switches. Contrary to many other kinds of safety devices against tear away, these quick connect couplings are re-usable and can be tested on all functions at any time. Approved break-away couplings for LPG stations break away force approx. 458 N at system pressure of 15.6 bar To avoid release of gas to atmosphere by hose rupture because of prematurely moving vehicles, the requirement for quick disconnection points was established. With certificate of 3/9/2001 the German Federal Authority TÜV approved the break-away coupling LP-019-Z75 in stainless steel and brass to be a suitable safety service. Approval No. TÜV.ST.BCD LPG.PN 40 Special Programme

108 106 Muliti-Couplings & Docking Systems

109 System Solutions 107

110 108 Quick Coupling Systems

111

112 products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA ph: (410) (800) fx: (410) (800) web: RFQ form: copyright 2011 maryland metrics/