Urban Lighting. Thorn offers many different types of Urban Lighting. Use this pictorial summary to help find what you need. Dyana.

Transcription

1 Outdoor Lighting

2 Urban Lighting OUTDOOR Thorn offers many different types of Urban Lighting. Use this pictorial summary to help find what you need URBAN LIGHTING Alumet Adelie Dyana Dyana LED II Avenue Deco Avenue F Avenue Virtual Freesia Plurio Plurio Effect Legend Classic Legend Modern EP145 Lemnis 65 Gamma Basique ECU, Joondalup, WA Glaremaster II 96 65

3 Alumet LED NEW LEDs 4x17W Alumet Stage T16 (FDH) G5 54W Alumet Classic HIT-CE (MT) G12 70/150W Alumet Indirect, 70W only for Direct CPO-TW (MT) PGZ-12 60/140W Alumet Indirect, 60W only for Direct HIR-CE111(MR) GX8.5 4x35W Alumet Stage AS/NZS60598 Class I Electrical IK08 IP65 Lighting columns for pedestrian spaces and creative minds Alumet Classic Safety and visual guidance Alumet Control Indirect Comfort without obtrusive light Alumet Control Direct Performance and efficiency Alumet Stage Pure theatre 66

4 Alumet Classic NEW OUTDOOR A sleek and simple lighting column, can orchestrate lighting compositions in a planned sequence while blending harmoniously with traditional and modern urban landscapes Exceptional visual comfort Ø 200 Ø Ø400 MGR MPL Arabesque Decorative Lampshield Electronic ballast White light with good colour rendering Possibility to use coloured T16 lamps for ambience Aluminium decorative 180 lampshield with arabesque or square pattern available as an accessory Bowl: Opal impact-resistant acrylic. Top cap: Cast aluminium. Column: Aluminium extruded column. Powder coating: silver grey textured (close to RAL 9006). 4m high column base plate or inground. Flange: 400 x 400mm. Spacings: 300 x 300mm, bolts 18 x 400 (included). Total height (with lit part of 1150mn): 5.25m. Diameter: 200mm. Access to lamp and gear via 2 M6 screws. Electronic gear inside head pre-wired with 4m cable. To specify state: IP65 decorative lighting column for 2 x 54W T16 lamps and matching aluminium column. As Thorn Alumet Classic. URBAN LIGHTING Ordering Guide Lamps to be ordered separately. For complete fitting order Luminaire and column. Lampshields sold as accessory. Description Ilcos Code Socket Wt (kg) SAP Code Luminaire ALUMET CLASSIC 2X54W T16 CL1 OP FDH G Columns ALUMET COL 4M MGR AL SIL ALUMET COL 4M MPL AL FAI SIL Lampshields ALUMET LAMPSHIELD 180 SQUARE ALUMET LAMPSHIELD 180 ARABESQUE MGR - inground, MPL - base plate, FAI - bolts included, OP - opal Square Decorative Lampshield 12.5m 10.0m 7.5m 5.0m 2.5m 0m 2.5m 5.0m 7.5m 10.0m 12.5m 12.5m10.0m7.5m 5.0m 2.5m 0m 2.5m5.0m7.5m10.0m12.5m Alumet Classic 2 x T16 54W 0.5 lux 1.0 lux 2.5 lux 5.0 lux 7.5 lux 10.0 lux 15.0 lux 67

5 Alumet Control Indirect NEW A unique optical design for outstanding control of light and aesthetic effect Sets of Fresnel aluminium rings to minimise upward light <3% upward light Vertical element helps give spatial depth to an illuminated scene Electronic ballast ensure energy saving capacities Aluminium decorative 180 lampshield with arabesque or square pattern available as an accessory Bowl: Clear UV stabilized PC diffuser treated with anti-graffiti varnish. Optics Optical Fresnel rings and reflector made of anodised aluminium. Slotted aluminium optic cover around the bottom of the reflector. Top cap: cast aluminium. Column: Aluminium extruded column. Powder coating: silver grey textured (close to RAL 9006). Ø 200 Ø Ø400 MGR MPL 4m high columns base plate or inground. Flange: 400 x 400mm. Spacings: 300 x 300mm, bolts 18 x 400 (included). Total height (with lit part of 1.25m): 5.25m. Diameter: 200mm. Access to lamp via 2 M6 screws in the top and by lifting up the bottom optic cover and reflector. Electronic gear in IP65 box suspended on the top of the column connected to the head and pre-wired with 4m cable. To specify state: IP65 decorative lighting column for 70/150W HIT-CE or 60/140W CPO lamp with Fresnel optical rings and matching aluminium column. As Thorn Alumet Control Indirect. Ordering Guides Lamps to be ordered separately. For complete fitting order Luminaire and column. Lampshields sold as accessory. Description Ilcos Socket Wt (kg) SAP Code Code Luminaire ALUMET CONTROL/I 60W CPO CL MT PGZ ALUMET CONTROL/I 140W CPO CL MT PGZ ALUMET CONTROL/I 70W HIT-CE CL MT G ALUMET CONTROL/I 150W HIT-CE CL MT G Columns ALUMET COL 4M MGR AL SIL ALUMET COL 4M MPL AL FAI SIL Lampshields ALUMET LAMPSHIELD 180 SQUARE ALUMET LAMPSHIELD 180 ARABESQUE MGR - inground, MPL - base plate, FAI - bolts included, OP - opal Suggested eco-friendly alternative Arabesque Decorative Lampshield Square Decorative Lampshield 12.5m 10.0m 7.5m 5.0m 2.5m 0m 2.5m 5.0m 7.5m 10.0m 12.5m 12.5m 10.0m7.5m 5.0m 2.5m 0m 2.5m 5.0m 7.5m10.0m 12.5m Alumet Control Indirect HIT-CE 70W 0.5 lux 1.0 lux 2.5 lux 5.0 lux 7.5 lux 10.0 lux 15.0 lux 68

6 Alumet Control Direct NEW OUTDOOR Combines performance, lighting control and aesthetics in a lighting column The highest performing and efficient member of the Alumet family A shining and stylish presence in the city ideal for enhancing and modernising a pedestrian area or light a cycle path Electronic ballast ensure energy saving capacities Direct lighting principle for better control of light, ULOR<2% Aluminium decorative 180 lampshield with arabesque or square pattern available as an accessory Ø 200 Ø 200 MGR / Ø400 MPL / Bowl: Clear UV stabilized PC treated with anti-graffiti varnish. Optics: Reflector made of anodised aluminium. Slotted aluminium optic cover around top reflector. Top cap: cast aluminium. Glass lens. Column: Aluminium extruded column. Powder coating: silver grey textured (close to RAL 9006). 4m high columns base plate or inground. Flange: 400 x 400mm, spacings: 300 x 300mm, bolts 18 x 400 (included). Total height (with lit part of 1.25m): 5.25m Diameter: 200mm Access to lamp via 2 M6 screws in the top and by lifting the bottom optic cover. Electronic gear in IP65 box suspended in the top of the column connected to the head and pre-wired with 4m cable. To specify state: IP65 decorative lighting column for 70W HIT-CE or 60W CPO lamp with Direct optic and fresnel lens and matching aluminium column. As Thorn Alumet Control Direct. URBAN LIGHTING Ordering Guides Lamps to be ordered separately. For complete fitting order Luminaire and column. Lampshields sold as accessory. Description Ilcos Socket Wt (kg) SAP Code Code Luminaire ALUMET CONTROL/D 60W CPO CL MT PGZ ALUMET CONTROL/D 70W HIT-CE G12 CL MT G Columns ALUMET COL 4M MGR AL SIL ALUMET COL 4M MPL AL FAI SIL Lampshields ALUMET LAMPSHIELD 180 SQUARE ALUMET LAMPSHIELD 180 ARABESQUE Arabesque Decorative Lampshield 12.5m 10.0m 7.5m 5.0m 2.5m 0m 2.5m 5.0m 7.5m 10.0m 12.5m 12.5m 10.0m 7.5m 5.0m 2.5m0m2.5m5.0m7.5m10.0m 12.5m Alumet Control Direct HIT-CE 70W 0.5 lux 1.0 lux 2.5 lux 5.0 lux 7.5 lux 10.0 lux 15.0 lux MGR - inground, MPL - base plate, FAI - bolts included, OP - opal Suggested eco-friendly alternative Square Decorative Lampshield 69

7 Alumet Stage LED NEW By day Alumet Stage is decorative and visually appealing. By night it comes into its own, enabling the designer to create a multiplicity of dramatic lighting effects Ordering Guide For complete fitting order head, column and LED modules. HIR-CE lamps to be ordered separately. Optical accessories and lampshield sold as accessory. Description Ilcos Code Socket Wt (kg) SAP Code Luminaire ALUMET STAGE 4X35W HIR-C111 CL* MR GX ALUMET STAGE 4X17W LEDs CL* LED Lamps/LED modules ALUMET STAGE 17W LED WW INT ALUMET STAGE 17W LED WW SINT ALUMET STAGE 17W LED CW INT ALUMET STAGE 17W LED CW SINT ALUMET STAGE 17W LED BLUE INT ALUMET STAGE 17W LED GREEN INT ALUMET STAGE 17W LED RED INT ALUMET STAGE 17W LED AMBER INT HIR-CE111 35W/10 /830 GX HIR-CE111 35W/24 /830 GX HIR-CE111 35W/40 /830 GX Lampshields and optical accessories ALUMET LAMPSHIELD 180 SQUARE ALUMET LAMPSHIELD 180 ARABESQUE ALUMET STAGE FILTER B ALUMET STAGE FILTER R ALUMET STAGE FILTER G ALUMET STAGE FILTER Y ALUMET STAGE LR ALUMET STAGE LV Columns ALUMET COL 4M MGR AL SIL ALUMET COL 4M MPL AL FAI SIL MPL - base plate, MGR - inground, FAI - bolts included, WW - warm white, CW - cool white, INT - narrow beam, SINT - medium beam, CL - clear, LR - Refractor, LV - Anti-glare louvre *Light sources (LEDs and HIR-CE111 cannot be mixed on the same head). Suggested eco-friendly alternative Four multidirectional spots (Metal Halide or LEDs) with optical accessories for a wide variety of effects Decorative lampshield accessory provides further aesthetical appeal and integration within architectural projects Ability to select a combination of lamp types and/or colours Aluminium decorative 180 lampshield with arabesque or square pattern available as an accessory Intensity (cd) Alumet Stage HIR-CE Imax: 26800cd Lamp: 35W HIR Ap: 2 x 4 Trans. Plane Bowl: Clear UV stabilised PC treated with anti-graffiti varnish. Top cap: cast aluminium. Lamp support and frame: aluminium. Spine: steel. Column: Aluminium extruded column. Optical accessories: Anti-glare louvre(lv), refractor(lr) and colour filters (red, blue, green, yellow). Powder coating: silver grey textured (close to RAL 9006). 4m high columns base plate or inground. Flange: 400 x 400mm, spacings: 300 x 300mm, bolts 18 x 400 (included). Total height (with lit part of 1.25m): 5.25m. Diameter: 200mm. Access to lamps via 2 M6 screws in the top and by removing (tool free) a spring behind spots frame. Easy settings of spots and accessories with one tool, possibility to combine colour filters and refractor. Electronic gear in IP65 box suspended in the top of the column connected to the head and pre-wired with 4m cable. To specify state: IP65 decorative lighting column equipped with multi-rotational spots for 4 x 35W HIR-CE111 or 4 x 17W LEDs modules and matching coated aluminium column. As Thorn Alumet Stage Ø 200 Ø 200 MGR / Ø400 MPL /

8 Adelie LED LEDs 32x1.6W AS/NZS60598 Class II Electrical IK08 IP65 OUTDOOR Style, comfort and durability in a uniquely designed indirect LED lantern Indirect light, elegant and simple design Cast aluminium ribbed base to optimise dissipation of heat for longer life of LEDs (up to 50,000 hours) Design of canopy, reflector and optics optimised for visual comfort and uniformity Easy installation and maintenance Robust and durable aluminium construction, sealed to IP65 Canopy: spun aluminium powder coated sandy grey. Base: cast aluminium sandy grey Lens: acrylic. Reflector: aluminium powder coated white with Teflon coating. Dedicated column: aluminium conical painted sandy grey Control gear plate: aluminium. Post-top mounting. Lantern base fixed inside dedicated column by one M10 screw. IP66 LED control gear pre-wired with 3.5 metre cable length to the lantern, suspended on plate at base of column. Aluminium tapered column, base plate or buried mounted. URBAN LIGHTING Ø223 Ø774 Ø76 Ø76 Ø To specify lantern state: IP65 indirect lighting lantern with aluminium canopy and Teflon coated reflector incorporated into a cast aluminium base with a acrylic lens and 32 X 1.6W LEDs. Canopy, base and column finished in sandy grey. Supplied in one box complete with IP66 LED control gear and 3.5m cable. As Thorn Adelie m 10m 8m 6m 4m 2m 0m -2m -4m -6m -8m 10lux 7.5lux 5lux 2.5lux 1lux 0.5lux m m -12m -10m -8m -6m -4m -2m 0m 2m 4m 6m 8m 10m12m Adelie on 3m Column MGR 700 Ordering Guide For complete package order lantern, column and column accessories. Description Wt (kg) SAP Code Lantern (with driver) ADELIE 51W LED 5200K ADELIE 51W LED 3800K Column ADELIE COL 3M MPL CCO GRY ADELIE COL 3M MGR CCO GRY Column Accessories FOUNDATION BOLTS CAGE ASSEMBLY GRY - grey, MGR - buried, MPL - base plate 71

9 Dyana HIT-CE (MT) E27/E W HIT-CE (MT) E27/E W CPO-TW (MT) PGZ W AS/NZS60598 Class I Electrical IP66 Outstanding lighting for the urban landscape, in a distinctively modern style luminaire Combines high performance, energy efficiency and versatility with easy maintenance - all in a distinctive, slim and modern shape that will compliment any environment Suitable for requirements as diverse as high density housing, open spaces, paths and roads Wherever a project calls for outstanding night performance with contemporary elegance during the day, Dyana is the perfect response HIgh frequency electronic control gear to reduce energy consumption The remarkable Dyana design balances optimum usability with breathtaking style. Its slim, pure contours combine with an ergonomic interior to promote fast-track maintenance and a long working life A choice of two luminaire sizes allows designers to make the best choice for any project, in mounting heights between 4 and 12 metres Dyana delivers glare-free light for a more pleasant urban environment 72

10 OUTDOOR Body: die-cast aluminium powder coated texturised grey (Akzo 900). Spigot: die-cast aluminium powder coated texturised grey (Azco 900). Canopy: spun aluminium powder coated texturised grey (Azco 900). Enclosure: toughened glass. Reflector: high purity anodised aluminium. Gear plate: galvanised steel. Gasket: silicon. Lateral mounting: 60 x 100mm long spigot. Secured by 2 screws with safety bolts. Cable gland for 8mm to 13mm cable. Tool free access to lamp after opening the optical housing via 2 x 1/4 lockers. Tool free access to gear after release of the retaining leg. Gear is tool free removable with retained screws. All connections are plug and socket. Delivered ready to install, complete with factory fitted integral gear and adjustable lamp settings, all supplied in a single carton (without lamp). To specify state: Full IP66 aluminium streetlighting fitting for 70 to 250W lamps. Side entry or top mounting onto 60mm diameter. Tool-free maintenance of gear and lamp. As Thorn Dyana 1 and 2. Simple tool free access to luminaire and lamp Automatic disconnection Tool free removal of control gear via plug/socket Optibloc system ensures easy access and maintenance Tool free access to control gear Internal components are modular for easy handling 510ø ø Windage: 0.035m² Windage: 0.039m² Size 1 Size 2 URBAN LIGHTING Ordering Guide Lamps to be ordered separately. Description Ilcos Code Socket Wt (kg) SAP Code Size 1 DYANA 1 60W CPO-TW CL1 MLE MT PGZ DYANA 1 140W CPO-TW CL1 MLE MT PGZ DYANA 1 70W HIT DGE CL1 MLE ST/MT E DYANA 1 150W HIT DGE CL1 MLE ST/MT E DYANA 1 70W HST DGE CL1 MLE ST/MT E DYANA 1 150W HST DGE CL1 MLE ST/MT E Size 2 DYANA 2 140W CPO-TW CL1 MLE MT PGZ DYANA 2 250W 240V HID CL1 MLE ST/MT E DYANA 2 150W HIT DGE CL1 MLE ST/MT E DYANA 2 150W HST DGE CL1 MLE ST/MT E All versions except 250W are electronic gear. Suggested eco-friendly alternative 73

11 Dyana LED II LED NEW LEDs 39-58W AS/NZS60598 Class II Electrical IK10 IP66 Available February 2012 A stylish and efficient urban lantern using LED technology Patented (street) optical system to enhance light distribution and reduce glare Choice of 2 versions: 3000lm and 5000lm Dyana LED provides effective lighting for many outdoor applications High frequency electronic dimming control gear Choice of post-top or sideentry Choice of street or asymmetric optics ø ø 666 Body and spigot: die-cast aluminium, textured anthracite finish (Akzo 900). Canopy: spun aluminium, textured anthracite finish (Akzo 900). Flat glass cover: 5mm thick toughened glass. Gasket: silicon. Side-entry mounting Ø 60mm, tilt = 0. Post-top mounting Ø 60mm, tilt = 10. End cap secured by 2 screws and 2 bolts. Slim section: only 110mm thick. Supplied complete and ready to install, in a single box. To Specify State: Stylish IP66 LED urban lighting lantern with unique optics (street or flood) that enhances light distribution and reduces glare. As Thorn Dyana LED II MLE MTP Ordering Guide Supplied complete with LEDs. SAP Description Wt (kg) SAP Code MLE - Side Entry Versions DYANA LED II 39W/BP CL2 STREET DYANA LED II 58W/BP CL2 STREET DYANA LED II 39W/BP CL2 A/S DYANA LED II 58W/BP CL2 A/S MTP - Post-top Versions DYANA LED II 39W/BP CL2 STREET DYANA LED II 58W/BP CL2 STREET DYANA LED II 39W/BP CL2 A/S DYANA LED II 58W/BP CL2 A/S BP - Power reduction (step dim) 74

12 Avenue Deco HSE (SE) E27 70W AS/NZS60598 Class II Electrical IP54 OUTDOOR Design co-ordinated family of amenity luminaires comprising of post top and wall bracket mounted lanterns and tapered columns Design minimises the spread of light above the horizontal Variety of decorative lamp shields for added aesthetics Column has choice of copper or steel finished sleeve to match lamp shields Control gear integral within lantern or bracket Lantern body and canopy: cast aluminium, finished anthracite. Lantern bowl: clear. Polycarbonate opal to order. Lamp shields: opal polycarbonate, copper-plated steel or stainless steel. Column: aluminium, powder coated anthracite, fitted with a 0.9m decorative sleeve, finished in untreated polished copper or satin stainless steel. Lantern: Recommended mounting height 3m. Suitable for Ø60mm spigot. 3 way terminal block for 4mm 2 conductors. Integral control gear. Control gear in lantern or wall bracket. Column: buried or base plate mounted. Latter supplied with four fixing bolts (JT16/ 14 x 300). 3m column tapers from 135/Ø114mm to Ø76mm with Ø60mm spigot. URBAN LIGHTING To specify lantern state: Aluminium bodied conical lantern for post top/wall bracket mounting with clear bowl and copper/stainless steel/perforated/slotted/opal polycarbonate lampshield, finished anthracite. As Thorn Avenue Deco. To specify column state: 3m tapered aluminium column with or without decorative sleeve, finished copper/stainless steel. Supplied for buried/base plate mounting. As Thorn Avenue Deco Column. 76ø ø ø

13 8m lux/1000 lm 4m 0 4m m 8m 4m 0 4m 8m Avenue Cat. No. Deco J with clear bowl and polycarbonate lamp shield Lamp: 70W HSE Mounting height: 3.1m Copper perforated lamp shield Wall bracket lantern 76 Copper and stainless steel sleeves Ordering Guide Order lantern and column for complete fitting. Lamp to be ordered separately. Description Ilcos Code Socket Wt (kg) SAP Code Post top lantern with clear bowl flat canopy Complete with integral control gear. AVENUE DECO PT HSE 70W POLYCARBONATE LAMP SHIELD SE E AVENUE DECO PT HSE 70W COPPER (PERFORATED) LAMP SHIELD SE E AVENUE DECO PT HSE 70W STAINLESS STEEL (PERFORATED) LAMP SHIELD SE E Wall Bracket Lantern with clear bowl Control gear in bracket. AVENUE DECO WL HSE 70W POLYCARBONATE LAMP SHIELD SE E AVENUE DECO WL HSE 70W COPPER (PERFORATED) LAMP SHIELD SE E AVENUE DECO WL HSE 70W STAINLESS STEEL (PERFORATED) LAMP SHIELD SE E m Tapered Columns COPPER SLEEVE MGR STAINLESS STEEL SLEEVE MGR COPPER SLEEVE MPL STAINLESS STEEL SLEEVE MPL WITHOUT SLEEVE MPL WITHOUT SLEEVE, MGR MGR - Buried, MPL - Base plate. Metal Halide versions available to special order.

14 Avenue F HSE-I (SE/I) E27 70W TC-TEL (FSM) Gx24q-4 42W HIE (ME) E27 100W AS/NZS60598 Class I Electrical IP54 OUTDOOR A family of amenity luminaires comprising of post top and wall bracket mounted lanterns and decorative columns Lantern design minimises the spread of light above the horizontal Choice of opal or clear conical shaped bowl Clear diffuser is enhanced by a luminous frosted band to limit glare and enhance performance Control gear integral within lantern canopy Columns available for rooted or flange plate mounting Lantern body, canopy and wall flange: aluminium, powder coated anthracite, textured. Wall bracket: cast aluminium and galvanised steel, finished anthracite, textured. Lantern bowl: opal or clear (with sandblasted frosted ring) polycarbonate. Column: extruded and cast aluminium, powder-coated anthracite. Lanterns recommended mounting height 3-4m. Post-top lantern: Integral control gear in canopy. Avenue F suitable for Ø60mm x 100mm long spigot. Wall lantern: Mounts directly to wall via two Ø10mm holes at 120mm centres. 5 way terminal block for 6mm 2 conductors. Looping possible. Integral control gear in lantern canopy. Columns: Buried or base plate mounted. Fixes via four Ø20mm holes at 160mm centres. To specify lanterns state: Aluminium bodied conical lantern for post top/wall mounting/ with opal/clear bowl, finished textured anthracite employing 70W HSE-I/ 42W TC -TEL/ 100W HIE lamp. As Thorn Avenue F. To specify columns state: 2.9m/2.1m aluminium with 4 parallel square rods/cross profile. Supplied for buried/base plate mounting. As Thorn Avenue F700/F500 column. URBAN LIGHTING 77

15 Buried Base Plate ø ø 8m lux/1000 lm 400 4m ø ø F ø m F700 F Parallel Square Cross Profile 8m 8m 4m 0 4m 8m Avenue Cat. No. F J post top with clear bowl Lamp: 70W HSE-I Mounting height: 4m Wall bracket lantern Ordering Guide Lamp to be ordered separately. Description Ilcos Code Socket Wt (kg) SAP Code Post Top Lanterns AVENUE F P/TOP HSE-I 70W CLEAR BOWL SE/I E AVENUE F P/TOP HSE-I 70W OPAL BOWL SE/I E AVENUE F P/TOP TC-TEL 42W CLEAR BOWL FSM Gx24Q AVENUE F P/TOP TC-TEL 42W OPAL BOWL FSM Gx24Q AVENUE F P/TOP HIE 100W CLEAR BOWL ME E AVENUE F P/TOP HIE 100W OPAL BOWL ME E F700 Columns 2.9M 4 PARALLEL SQUARE RODS, MPL M 4 PARALLEL SQUARE RODS, MGR M CROSS PROFILE, MPL M CROSS PROFILE, MGR Wall Bracket F500 Lantern HSE-I 70W WITH CLEAR BOWL SE/I E HSE-1 70W WITH OPAL BOWL SE/I E MGR - Buried, MPL Base plate Moseley Square, Glenelg, SA 78

16 Avenue Virtual HIT-CE (MT) G W AS/NZS60598 Class II Electrical 5 Nm Impact resistant IP65 OUTDOOR An elegant, decorative indirect lighting lantern, with a choice of complementary columns Luminaire and reflector design give 100% indirect lighting and prevent the spread of light above the horizontal Excellent performance: 95% of the light emitted from the light source is captured by the top reflector Flat top reflector with multiple rings eradicates glare whilst controlling the light distribution for excellent uniform illuminance Decorative lamp shield provides visual appeal Silver effect finish for high visual impact Dedicated column available URBAN LIGHTING 79

17 Bottom reflector Top plate Canopy: LM6 Marine grade die-cast aluminium, powder coated silver colour, textured (close to RAL 9006). Top reflector: pressed semi-specular aluminium with clear lacquer protection. Closure screen: heat resistant Borosilicate glass, coated with weather resistant optical lacquer for optimal transmission of light. Bowl: pressed anodised aluminium. Outer surface treated for optimal weather resistance. Lamp shield: UV stabilised PC. Arm and arm base: die-cast aluminium, powder coated silver colour, textured (close to RAL 9006). Column: 3m aluminium, powder coated silver colour, textured (close to RAL 9006). To specify lanterns state: Aluminium bodied conical lantern for post top mounting with UV resistant polycarbonate lamp shield and Borosilicate glass projector closure screen, powder coated silver colour, textured. Flat top reflector with multiple rings. Indirect lighting, for use with 70/150W HIT-CE lamp. As Thorn Avenue Virtual. To specify columns state: 3m cylindrical galvanised steel or aluminium with silver effect finish column, with Ø60mm x 100mm long spigot. Supplied for buried/base plate mounting. As Thorn Avenue Virtual Column. Lantern recommended mounting height 3 to 4m. Post-top lantern: Suitable for Ø60mm x 100mm long spigot. Columns: Buried or base plate mounted. Base plate version fixes via four Ø20mm holes at 200mm centres Cylindrical section gear box mounts in column, and is used with connection box ø Decorative lamp shield 76/90ø 76/90ø Ordering Guide Lamps to be ordered separately. For complete fitting please order lantern, gear tray and column. Description Ilcos Code Socket Wt (kg) SAP Code Lantern AVENUE VIRTUAL LANTERN Gear Tray HIT-CE 70W MT G HIT-CE 150W MT G Column AVENUE COL 3M MGR AL CCO ANT AVENUE COL 3M CCO AL MPL FAI GRY m lux/1000 lm 4m 0 4m 8m 8m 4m 0 4m 8m Mounting Avenue Virtual height: 3.6m Lamp: 70W HIT-CE Mounting height: 3.6m / ø 3000/ MPL - base plate, MGR - buried, FAI - foundation bolts included 80

18 Freesia HIT-CE (MT-CE) E27/ W TC-TEL (FSM) G2x24q-4 42W HIT (MT) E40 250Q HST (ST) E27/ W AS/NZS60598 Class II Electrical IP65 (optical compartment - size 1) IP54 (control gear compartment - size 1) IP66 (optical compartment - size 2) IP44 (control gear compartment - size 2) OUTDOOR A pendant style lantern with echoes of heritage Based on the proven Decostreet construction High performance optical system (Optibloc ) engineered to give improved visibility and reduced glares Easy installation and maintenance Classical shape with contemporary performance Choice of conical, round and deep bowls Non-degrading materials ensure durability and low maintenance IP65/66 optical compartment Adjustable lampholder position enables customisation for particular projects URBAN LIGHTING 81

19 Choice of two reflectors: Asymmetrical reflector - For street and road lighting applications. By changing the lampholder positions different light distributions can be obtained to satisfy various project requirements. Body: die-cast aluminium. Canopy: spun aluminium, painted light grey RAL Enclosure: UV stabilised polycarbonate. Decorative ring: polypropylene, painted dark grey RAL Optical reflector: aluminium. Suspended mounting with a threaded 34mm diameter tube. To specify state: Decorative street lantern in die cast aluminium with spun aluminium canopy in classical style, choice of conical, round or deep bowls, in two sizes. 70/150/250W HST, 70/150W HIT-CE, 250W HIT, 42W TC-TEL lamp options. Suspended mounting. Optical compartment sealed to IP65/IP66. As Thorn Freesia. Windage Size 1: 0.14m 2 Size 2: 0.21m 2 Conical bowl Windage Size 1: 0.16m 2 Size 2: 0.23m 2 620ø/725ø 609/ /717 Ordering Guide Lamps to be ordered separately. For complete fitting please order gear tray and lantern. Description Ilcos Code Socket Wt (kg) SAP Code Gear trays for size 1 DST1 GT 70W 240V HST/HIT-CE V4L1A ST/MT E DST1 GT 150W 240V HST/HIT-CE V1 ST/MT E DST1 GT 42W TC-TEL V2L2A FSM GX24Q Gear trays for size 2 DST2 GT 150W 240V HST/HIT-CE V3L1 ST/MT E DST2 GT 250W 240V HST/HIT V4L3 ST/MT E Lantern for Freesia Size 1 FREESIA1 ECO/CL/PC RAS CONICAL BOWL FREESIA1 ERD/CL/PC RAS ROUND BOWL FREESIA1 ERP/CL/PC RAS DEEP BOWL Lantern for Freesia Size 2 FREESIA2 ECO/CL/PC RAS CONICAL BOWL FREESIA2 ERD/CL/PC RAS ROUND BOWL FREESIA2 ERP/CL/PC RAS DEEP BOWL Product supplied less bracket 620ø/725ø Round bowl 4h 4h 3h 2.5 lux 3h 2.5 lux Windage Size 1: 0.19m2 Size 2: 0.27m2 721/849 2h 1h 0h 5 lux 10 lux 25 lux 50 lux 2h 1h 0h 5 lux 10 lux 25 lux 50 lux -1h 75 lux -1h 75 lux -2h 100 lux -2h 100 lux Deep bowl 620ø/725ø -3h -5h -4h -3h -2h -1h -0h 1h 2h 3h 4h 5h Fressia Freesia/Nerine size 1 asymmetrical size 1 asymmetrical reflector, reflector, conical bowl Lamp: 150W HST Lamp position: V2 LOR: 0.67 DLOR: h -5h -4h -3h -2h -1h -0h 1h 2h 3h 4h 5h Fressia size 2 asymmetrical reflector, conical bowl Lamp: 250W HST Lamp position: V8L4-A LOR: 0.70 DLOR:

20 Plurio TC-TEL (FSM) GX24q-5 57W HSE (SE) E27 70W HIE (ME) E27 70W HSE (SE) E40 100W HIE (ME) E40 100W AS/NZS60598 Class I Electrical IK08 Class II Electrical IP66 OUTDOOR A lantern with innovative high performance optical system engineered for improved visibility, reduced glare and control of obtrusive light Two canopy styles (with clear bowls) to suit any given landscapes Multifacetted optic provides outstanding illuminance and uniformity Canopy avoids obtrusive light (ULOR down to 0% with ULOR 0% accessory) Choice of lamp that optimise energy consumption Aluminium lampshield (120 ) for residential cut-off available Glare avoidance with use of prisms on clear bowl Canopy, base and optic made of aluminium. Optics: aluminium multifacetted reflector. Bowl: UV stabilised polycarbonate clear with antiglare prisms. Powder coating: silver grey textured (close to RAL 9006). Post top mounting Spigot: 60mm diameter x 75mm long. Recommended height: 3/4m. Dedicated range of columns and brackets. Access to lamp and gear via 3 screws below the bowl. URBAN LIGHTING Resistant (IP66 seal), durable and recyclable materials Dedicated range of decorative columns and brackets Ø564 To specify lantern state: IP66 post top decorative aluminium lantern for W high pressure sodium or metal halide, 57W compact fluorescent, powder coated silver grey finish, with multifacetted aluminium optic. As Thorn Plurio Ø60 Plurio Original Windage: 0.070m 2 Ø lx 10lx 5lx 2lx Ø60 Plurio Round Windage: 0.070m 2 Plurio with facetted reflector and clear bowl Lamp: 70W HIE DLOR: 69% ULOR: 1% Lamp height: 4M Ordering Guide: Lamps to be ordered separately. Description Ilcos Socket Wt Original Round Code (kg) SAP Code SAP Code Lantern with conventional gear PLURIO 100W HID CL1* SE/ME E Lantern with electronic gear PLURIO 70W HIDE CL1* SE/ME E PLURIO 57W TC-TEL CL2 FSM GX24Q Accessories PLURIO ULOR 0% PLURIO LAMP SHIELD PLURIO BASE 76MM CL1 - class 1 electrical, CL2 - class 2 electrical. *Only use Venture elliptical lamps Suggested eco-friendly alternative Cd/1000lm Plurio with facetted reflector and clear bowl Lamp: 70W HIE DLOR: 69% ULOR: 1% 83

21 Plurio Effect TC-TEL (FSM) GX24q-5 57W HSE (SE) E27 70W HIE (ME) E27 70W HSE (SE) E40 100W HIE (ME) E40 100W AS/NZS60598 Class I Electrical IK08 Class II Electrical IP66 Original architectural lantern with a customisable canopy to create a soft ambience as well as promote corporate logos and special events At night time, light is visible through the transparent white rings on the canopy creating a welcoming and stylish ambience Ideal in parks or promenades to reveal tree foliage and to provide users with a feeling of safety Possibility to customise the canopy pattern on request, Possibility to change the filter for special events Glare avoidance with use of prisms on clear bowl No obtrusive light, ULOR = 4% Optimised maintenance and installation Dedicated range of decorative poles and brackets Aluminium lampshield (120 ) to cut-off flux available Canopy: Transparent polycarbonate painted externally in grey silver (RAL9006) with internal grey layered printed white filter. Base: Cast aluminium powder coated silver grey textured (close to RAL9006). Bowl: Clear UV stabilised polycarbonate with external anti glare prisms. Post top mounting. Spigot: 60mm diameter x 75m long. Recommended height: 3/4m. Dedicated range of columns and brackets. Access to lamp and gear via 3 screws below the bowl. To specify lantern state: IP66 post top lantern for W high pressure sodium or metal halide, 57W compact fluorescent, made in transparent polycarbonate painted externally in grey silver with internal grey layered printed white PC filter, prismatic bowl and cast aluminium base in coated silver grey. As Thorn Plurio Effect. Ø Ø60 Ordering Guide: Lamps to be ordered separately. Description Ilcos Socket Wt SAP Code Code (kg) Lantern with conventional gear PLURIO E 100W HID CL1* SE/ME E Lantern with electronic gear PLURIO E 70W HIDE CL1* SE/ME E PLURIO E 57W TC-TEL CL2 FSM GX24Q Accessories PLURIO ULOR 0% PLURIO LAMP SHIELD PLURIO BASE 76MM CL1 - class 1 electrical, CL2 - class 2 electrical. *Only use Venture elliptical lamps Suggested eco-friendly alternative Plurio Effect advertising music event (sample) Plurio Effect used for branding (sample) Plurio Effect Windage: 0.070m lux 3 10lux 5lux 6 2lux Plurio Effect Lamp: 70W HIE DLOR: 47% ULOR: 4% Lamp Height: 4m 84

22 Plurio Columns & Brackets OUTDOOR A range of columns and brackets designed to harmonise both in style and proportion with Plurio lanterns A range of 3.5m galvanised steel columns, in a choice of tubular (with decorative tappered upper sleeve) and stepped (with decorative collar) forms Two choices of column installation: base plate or buried Three designs of bracket arm are available: single outreach, twin outreach and wall Single bracket Windage: 0.07m xM6 at 90 Material/Finish Brackets: Powder coated silver grey (close to RAL 9006). Post-top brackets fix on a 60mm spigot. All brackets accept Plurio lanterns with 60mm spigots. Column: Galvanised steel, powder coated sandy grey 900 (close to RAL 7046). Spigot: 60mm. Height: 3.5m. Mounting: base plate (MPL) and buried (MGR). Base plate: 225x225mm Decorative Collar: Cast aluminium to be ordered separately powder coated silver grey as Plurio lantern (close to RAL 9006) to be ordered separately. Mounts on the column with 3 M8 screws (provided). Requires foundation steel cage (ordered separately). URBAN LIGHTING xM6 at 90 Twin bracket Windage: 0.13m Ø Wall bracket Windage: 0.06m 2 Ordering Guide For complete package please order collar or uppersleeve, corresponding column, column accessories and bracket (if required). Ø60 80 Ø76 Ø60 Description Wt (kg) SAP Code Collar PLURIO COLLAR SIL Plurio Columns for use with collar PLURIO COL 3.5M D140/76/60 MPL GRY PLURIO COL 3.5M D140/76/60 MGR GRY Upper Sleeve PLURIO BRA TOP 500MM MTP D102/60 SIL Plurio Columns for use with upper sleeve PLURIO COL 3M 102MM MPL GRY PLURIO COL 3M 102MM MGR GRY Brackets - column mounted PLURIO BRAX1 640MM MTP D60 SIL PLURIO BRAX2 1.2M MTP D60 SIL Brackets - wall mounted PLURIO BRAX1 600MM MWA D60 SIL Column Accessories FOUNDATION BOLTS CAGE ASSEMBLY Ø76 Ø MGR Ø102 2x4 M8/16 Ø MGR MPL - base plate, MGR - buried 85

23 Legend Classic HST (ST) E27/E W HIT-CE (MT) E27/E W TC-TEL (FSM) GX24q-4 42W AS/NZS60598 Class I Electrical 5 Nm Impact resistant IP65 A classic shaped range of low light pollution lanterns for application in older cities, towns and historical areas Choice of post top or suspended mounting. Both offer the option of an illuminated top cap Post top version produces virtual glow effect when lit Precise light distribution ensures no direct upward light, and a consequent reduction in light pollution The Optibloc internal optic can be rotated in 45 steps to maintain uniform visual appearance and offer different distributions The high performance optics are suitable for street lighting Body: die-cast aluminium, dark grey powder coated finish, (close to RAL 9007). Flat enclosure: toughened glass. Reflector: pure aluminium. Post top: poles 76mm diameter, fixing on shaft through 3 x M8 stainless steel screws (supplied). Suspended: fixed through a 1 inch BSP threaded tube. Recommended mounting height: 4 to 5m. To specify state: Post top or suspended lantern in die-cast aluminium painted in dark grey finish, flat toughened glass, with aluminium reflector embodied in an IP65 compartment. As Thorn Legend Classic. Airlie Beach, QLD 86

24 URBAN LIGHTING OUTDOOR Windage: 0.13m 2 Windage: 0.20m 2 32m lux/1000 lm 24m 16m 8m Distance along road 0 8m 16m 24m 32m 16m m 0 8m 16m 24m Legend Classic post top Lamp: 150W HST DLOR: 0.57 LOR: 0.57 Mounting height: 0.80m Utilisation factors Distance/Height Road House Distance/Height Road House W 1 /H or W 2 /H side side W 1 /H or W 2 /H side side Ordering Guide Lamp to be ordered separately. For complete fitting please order lantern and gear tray. Description Ilcos Code Socket Wt (kg) SAP Code Lantern LEGEND CLASSIC POST TOP LEGEND CLASSIC SUSPENDED Gear trays - Non illuminated top cap HST/HIT-CE 70W ST/MT E HST/HIT-CE 150W ST/MT E TC-TEL 42W FSM GX24Q Gear trays - Illuminated top cap HST/HIT-CE 70W ST/MT E HST/HIT-CE 150W ST/MT E Accessory POST TOP ADAPTOR FOR 60MM SHAFT

25 Legend Modern HST (ST) E27/E W HIT-CE (MT) E27/E W TC-TEL (FSM) GX24q-4 42W AS/NZS60598 Class I Electrical 5 Nm Impact resistant IP65 A modern shaped range of low light pollution lanterns mainly dedicated to modern city centres and residential areas Choice of post top or suspended mounting Precise light distribution ensures no direct upward light, and a consequent reduction in light pollution The Optibloc internal optic can be rotated in 45 steps to maintain uniform visual appearance and offer different distributions The high performance optics are suitable for streetlighting Body: die-cast aluminium, dark grey powder coated finish, (close to RAL 9007). Flat enclosure: toughened glass. Reflector: pure aluminium. Post top mounted version on poles 76mm diameter, fixing on shaft through 3 x M8 stainless steel screws (supplied). Suspended version fixed through a 1 inch BSP threaded tube. Recommended mounting height: 4 to 5m. To specify state: Post top or suspended lantern in die-cast aluminium painted in dark grey finish, flat toughened glass, with aluminium reflector embodied in an IP65 compartment. Reflector will provide a light distribution for streetlighting, and will have an upward light output ratio of zero. As Thorn Legend Modern. FR Pascual 88

26 URBAN LIGHTING OUTDOOR Windage: 0.11m 2 Windage: 0.14m 2 32m lux/1000 lm 24m 16m 8m Distance along road m 16m 24m 32m 16m 8m 0 2m 4m Legend Modern post top Lamp: 150W HST DLOR: 0.55 LOR: 0.55 Mounting height: 0.80m Utilisation factors Distance/Height Road House Distance/Height Road House W 1 /H or W 2 /H side side W 1 /H or W 2 /H side side Ordering Guide Lamp to be ordered separately. For complete fitting please order lantern and gear tray. Description Ilcos Code Socket Wt (kg) SAP Code Lantern LEGEND MODERN POST TOP LEGEND MODERN SUSPENDED Gear trays HST/HIT-CE 70W ST/MT E HST/HIT-CE 150W ST/MT E TC-TEL 42W FSM GX24Q Accessory POST TOP ADAPTOR FOR 60MM SHAFT

27 EP145 HST (ST) E27/E W AS/NZS60598 Class II Electrical 6 Nm Impact resistant IP44 - Gear compartment IP66 - Lamp compartment A range of sealed Victorian styled lanterns in antique copper or black finish Choice of post top or suspended mounting Hinged top canopy for easy control gear access and one piece bowl for improved sealing and maintenance requirements Enhanced performance with aluminium optic and horizontal lamp Lantern body: stainless steel, finished black (RAL 9005), or aged copper. Lantern top: GRP/polyester. Gasket: silicone. Gear tray: aluminium reflector optic. Bowl: clear/opal UV resistant, high impact acrylic. Hinged canopy top provides access to gear tray. Recommended mounting height 3-5m. Post-top: Choice of 60mm or 76mm spigot cap. Suspended versions fix via 3 /4 inch BSP gas pitch thread. To specify state: Post-top/suspended mounted Victorian style lantern in black/ aged copper for vertical/ horizontal lamp orientation. Integral control gear with hinged canopy. As Thorn EP ø gas pitch Windage: 0.163m 2 90

28 URBAN LIGHTING Distance along road OUTDOOR 20m lux/1000 lm 15m 10m 5m X 0 5m m 15m 20m 10m 5m 0 5m 10m 15m House side Road side EP145 Cat. aged No. EP145 copper CVP post VMC top + EP145 mounted GTRNB 1100.T Lamp: 100W HPS-T + clear bowl DLOR: 0.54 LOR: 0.54 Lamp: 100W HST DLOR: 0.54 LOR: 0.54 Mounting height: 5.0m Mounting height: 5m Utilisation factors Distance/Height Road House Distance/Height Road House W 1 /H or W 2 /H side side W 1 /H or W 2 /H side side Ordering Guide Lamps to be ordered separately. For complete fitting please order lantern and gear tray. Description Ilcos Code Socket Wt (kg) Clear bowl SAP Code Opal bowl SAP Code Lanterns EP145 BLACK, POST-TOP EP145 BLACK, SUSPENDED EP145 AGED COPPER, POST-TOP EP145 AGED COPPER, SUSPENDED Gear Trays HST 70W ST E HST 100W ST E HST 150W ST E Accessories COLUMN MOUNTING CAP FOR Ø60MM SPIGOT COLUMN MOUNTING CAP FOR Ø76MM SPIGOT Burwood Park, Burwood, NSW 91

29 Lemnis 65 HIT-CE (MT) E27/E W HST (ST) E W AS/NZS60598 Class II Electrical IP65 A high performance lantern with a unique curved profile Applications from car parks to main roads Unique design allows distinctive identity to a lit area Adjustable lampholder allows various distributions Gear tray removable for easy maintenance Upper canopy: steel reinforced black GRP. Lower canopy: grey GRP. Optical systems: aluminium reflector and glass lens Cable entry via neoprene gasket in bracket. Recommended height 5-10m. To specify state: Thorn Lemnis street lantern with polyester body containing Thorn glass optical system and curved glass panel with integral control gear. IP65 rated. As Thorn Lemnis m lux/1000 lm 30m 20m 10m 890 Distance along road 0 X m 0.60 Windage 0.12m 2. Ordering Guide Lamps to be ordered separately. For complete fitting please order lantern and gear tray. Description Ilcos Socket Wt SAP Code Code (kg) Lantern LEMNIS OPTICAL SYSTEM Gear trays LEMNIS HIT-CE 70W MT E LEMNIS HIT-CE 150W MT E LEMNIS HST 150W ST E Product supplied less bracket, brackets available to special order 20m 30m m 20m 10m 0 10m 20m 30m House side Road side Cat. No. IS700S ISGTNB [V:1,L:0.5] Lemnis 65 Lamp: 150W HST DLOR: 0.66 LOR: 0.66 Design attitude: 0 Mounting height: 10m Utilisation factors Distance/Height Road House Distance/Height Road House W 1 /H or W 2 /H side side W 1 /H or W 2 /H side side

30 URBAN LIGHTING OUTDOOR 93

31 Gamma Basique HST (ST) E27 70W HSE (SE) E27 70W HIT-CE (MT) E27 70W AS/NZS60598 Class I Electrical 5 Nm Impact resistant 40 Nm Impact resistant vandal resistant version IP65 A best value post-top amenity lantern range Ideal for precincts, car parks, approach roads and pedestrian areas Choice of lamps including white light options to suit differing applications Small or large canopy options available Clear or opal reeded bowl for improved aesthetics Vandal resistant version for high risk areas - delivered fully assembled Refractor versions for asymmetric light distribution - controls/directs light and reduces light spill Miniature electronic photocell versions for automatic on/off switching Quick and easy installation with hinged gear tray Environmentally friendly - material fully recyclable Windage: 0.11m Windage: 0.099m 2 cd/1000 lm Cat. No. QG6NB QG6W + QG6M Lamp: 70W HSE DLOR: 0.55 LOR: 0.73 Mounting height: 4m Hinged gear tray 94

32 OUTDOOR Bowl/Diffuser: injection moulded 5 Nm acrylic (vandal resistant version - polycarbonate) opal reeded or clear reeded finish (vandal resistant version - clear reeded only). Base: die-cast aluminium, dark grey powder coat textured finish, close to RAL Canopy: spun aluminium, dark grey powder coat finish with white underside. Post top mounting - 76mm diameter x 76mm long spigot. (Dedicated accessory available to allow 60mm diameter x 100 long spigot mounting). Recommended mounting height: 4 to 5 metres. Fixes to shaft with 3 x M8 stainless steel screws (supplied). Vandal proof version supplied fully assembled, complete with clear reeded bowl and small canopy. To specify state: Amenity post top lantern made with die-cast aluminium base in grey power coat, 5 Nm acrylic opal/clear reeded bowl/diffuser and canopy in spun aluminium with dark grey powder coat. As Thorn Gamma Basique. Ordering Guide Lamp to be ordered separately. For complete fitting please order base assembly with gear, bowl/diffuser and canopy. Description Ilcos Code Socket Wt (kg) SAP Code Base assemblies with gear HST/HSE/HIT-CE 70W SE/ST/MT E HST/HSE/HIT-CE WITH REFRACTOR 70W SE/ST/MT E Bowls/Diffuser GAMMA B CLEAR REEDED ACRYLIC BOWL GAMMA B OPAL REEDED ACRYLIC BOWL Canopies GAMMA LARGE CANOPY GAMMA LARGE CANOPY WITH MINIATURE PHOTOCELL GAMMA SMALL CANOPY GAMMA SMALL CANOPY WITH MINIATURE PHOTOCELL Vandal resistant* GAMMA B 70W HST/HSE/HIT-CE + NEMA SOCKET SE/ST/MT E GAMMA B 70W HST/HSE/HIT-CE SE/ST/MT E Accessory GAMMA B 60MM ADAPTOR *This product is delivered fully assembled, complete with clear reeded polycarbonate bowl/diffuser and small canopy. URBAN LIGHTING 95

33 Glaremaster II HIT (MT) E W AS/NZS Class I Electrical IP55 Members of a family of high performance downward distribution environmental lanterns. Designed for general outdoor area and sports lighting Available in a range of sizes to suit lighting performance and design aesthetic requirements Suitable for pole and wall mounting Alternate reflector optics to suit a range of situations (S) street ( W) (F) forward throw (150-2KW) 2KW with remote gear IP55 protection rating Energy efficient design Low glare High efficiency lamp choices Spigot or body mounting Hinged glazing Cd/1000lm New Glaremaster II Lamp: 1000W HIT LOR: Ordering Guide Supplied complete with lamp. Small Version Side elevation Bottom elevation Large Version Side elevation End elevation End elevation Description Ilcos Code Socket Wt (kg) SAP Code Glaremaster II GLAREMASTER II SMALL 150W HIT FLOOD MT E GLAREMASTER II SMALL 250W HIT FLOOD MT E GLAREMASTER II SMALL 400W HIT FLOOD MT E GLAREMASTER II SMALL 1000W HIT FLOOD MT E GLAREMASTER II SMALL 150W HIT STREET MT E GLAREMASTER II SMALL 250W HIT STREET MT E GLAREMASTER II SMALL 400W HIT STREET MT E Accessories GLAREMASTER II Ø60MM SIDE ENTRY SPIGOT GLAREMASTER II 100MM RECTANGULAR ARM Ø 60.0 Ø 62.0 Body: formed and fabricated aluminium, powder coat black painted finish. Gear tray: galvanised steel. Lampholder: porcelain. Reflectors: aluminium. Visor: one piece toughened clear glass. Wall mounted via 2 mounting holes located at the end of the luminaire. Two additional mounting options available: Internal spigot adaptor to suit Ø 60mm spigot or 100mm long rectangular arm allows fixing on a flat vertical building or pole. To specify state: Rectangular/round outdoor light with rating equal to IP55. Robust aluminium body with integral HPF control equipment. Choice of optical assembly street/ forward throw distribution. One piece clear glass visor bottom face. As Thorn Glaremaster II. 96

34 Columns OUTDOOR Thorn Lighting offers a wide range of columns for road lighting, floodlighting, and amenity lighting applications. The ranges include both steel and aluminium types Aluminium columns Proof against corrosion even in harsh marine environments Maintenance free - does not need painting Paint applied for aesthetic purposes adheres securely Lightweight for easy handling and erection Reduced risk of injury in collision Recyclable at end of life Steel columns Larger range of heights available Greater weight carrying capacity Greater capacity in windage loading Possibility of additional kit to give heritage styling URBAN LIGHTING Thorn Lighting can provide a wide variety of individually designed luminaire and column packages to suit any application. For more information please contact your local Thorn Lighting branch. 97