SPARE PARTS AND ACCESSORIES
|
|
|
- Katherine Barber
- 6 years ago
- Views:
Transcription
1 LAUFER Free Flow Shutter Valve (Arc Valve) - chapter 2 Bearing bush Static O-ring for bearing cap Dynamic O-ring for pivoted axle Shutter Static O-ring for cone LAUFER Pig Diverter Shutter Valve - chapter 3 Bearing bush Static O-ring for bearing cap Dynamic O-ring for pivoted axle Shutter Static O-ring for cone 36
2 For shutter valves - chapter 2 and 3 O-ring set EPDM / FKM (Viton ) Consists of: 1x O-ring for pivoted axle* 1x O-ring for bearing cap 1x O-ring for cone EPDM O-ring set 1.00 (25.4) 25SD502S21E 1.50 (38.1) 38-40SD502S21E 2.00 (50.8) 50-51SD502S21E 2.50 (63.5) 63S502S21E 3.00 (76.2) 65-76SD502S21E 4.00 (101.6) SD502S21E 6.00 (152.4) 150D502E FKM (Viton ) O-ring set 1.00 (25.4) 25SD502S21V 1.50 (38.1) 38-40SD502S21V 2.00 (50.8) 50-51SD502S21V 2.50 (63.5) 63S502S21V 3.00 (76.2) 65-76SD502S21V 4.00 (101.6) SD502S21V 6.00 (152.4) 150D502V O-ring set FEP Consists of: 1x O-ring for pivoted axle* 1x O-ring for bearing cap 1x O-ring for cone FEP O-ring set 1.00 (25.4) 25SD502S21FEP 1.50 (38.1) 38-40SD502S21FEP 2.00 (50.8) 50-51SD502S21FEP 2.50 (63.5) 63S502S21FEP 3.00 (76.2) 65-76SD502S21FEP 4.00 (101.6) SD502S21FEP 6.00 (152.4) 150D502FEP Dyneon TFM1600 shutter 1.00 (25.4) 25SD501T 1.50 (38.1) 38-40SD501T 2.00 (50.8) 50-51SD501T 2.50 (63.5) 63S501T 3.00 (76.2) 65-76SD501T 4.00 (101.6) SD501T PTFE GL25 shutter (glass-fiber reinforced) 1.00 (25.4) 25SD501G 1.50 (38.1) 38-40SD501G 2.00 (50.8) 50-51SD501G 2.50 (63.5) 63S501G 3.00 (76.2) 65-76SD501G 4.00 (101.6) SD501G 6.00 (152.4) 150D501T Techtron shutter 1.00 (25.4) 25SD501H 1.50 (38.1) 38-40SD501H 2.00 (50.8) 50-51SD501H 2.50 (63.5) 63S501H 3.00 (76.2) 65-76SD501H 4.00 (101.6) SD501H 6.00 (152.4) upon request Tecapeek shutter 1.00 (25.4) 25SD501P 1.50 (38.1) 38-40SD501P 2.00 (50.8) 50-51SD501P 2.50 (63.5) 63S501P 3.00 (76.2) 65-76SD501P 4.00 (101.6) SD501P 5 *Please note: For shutter valves with leakage control of the moving O-ring seal (chapter 4.4), the O-ring set contains two O-rings for the pivoted axle. 37
3 For shutter valves - chapter 2 and 3 Bearing bush POM (Polyacetal) 1.00 (25.4) 25SD (38.1) 38-80SD (50.8) 38-80SD (63.5) 38-80SD (76.2) 38-80SD (101.6) SD (152.4) 150D503 Bearing bush Dyneon TFM (25.4) 25SD503T 1.50 (38.1) 38-80SD503T 2.00 (50.8) 38-80SD503T 2.50 (63.5) 38-80SD503T 3.00 (76.2) 38-80SD503T 4.00 (101.6) SD503T 6.00 (152.4) 150D503T Assembling tool for the pinch nut 1.00 (25.4) SL 1.50 (38.1) SL 2.00 (50.8) SL 2.50 (63.5) SL 3.00 (76.2) SL 4.00 (101.6) SL 6.00 (152.4) SL 38
4 Standard handle, 4 x 90 L1 h 1.00 (25.4) 25-40SD (160) 2.01 (51) 1.50 (38.1) 25-40SD (160) 2.01 (51) 2.00 (50.8) 50-63SD (190) 2.01 (51) 2.50 (63.5) 50-63SD (190) 2.01 (51) 3.00 (76.2) 65-80SD (190) 2.01 (51) 4.00 (101.6) SD (270) 2.01 (51) 6.00 (152.4) 150D (270) 2.17 (55) Standard handle with feedback bracket M12, 0-90 L1 h 1.00 (25.4) 25-40SD506-90R 6.30 (160) 2.01 (51) 1.50 (38.1) 25-40SD506-90R 6.30 (160) 2.01 (51) 2.00 (50.8) 50-63SD506-90R 7.48 (190) 2.01 (51) 2.50 (63.5) 50-63SD506-90R 7.48 (190) 2.01 (51) 3.00 (76.2) 65-80SD506-90R 7.48 (190) 2.01 (51) 4.00 (101.6) SD506-90R (270) 2.01 (51) 6.00 (152.4) 150D506-90R (270) 2.17 (55) View A: Vertical pneumatic actuator (AISI304), double acting 0-90 (air/air) Ø d1 Ø d2 H h L L (25.4) 25-40KH002D 3.50 (89) 1.97 (50) 8.07 (205) 6.89 (175) 3.15 (80) 1.97 (50) A A View A: 1.50 (38.1) 25-40KH002D 3.50 (89) 1.97 (50) 8.07 (205) 6.89 (175) 3.15 (80) 1.97 (50) 2.00 (50.8) 50-63KH004D 4.09 (104) 1.97 (50) 8.07 (205) 6.89 (175) 3.15 (80) 1.97 (50) 2.50 (63.5) 50-63KH004D 4.09 (104) 1.97 (50) 8.07 (205) 6.89 (175) 3.15 (80) 1.97 (50) 3.00 (76.2) 65-80KH006D 5.08 (129) 1.97 (50) (260) 9.06 (230) 3.15 (80) 2.76 (70) 4.00 (101.6) KH006D 5.08 (129) 2.76 (70) (260) 9.06 (230) 3.15 (80) 2.76 (70) Vertical pneumatic actuator (AISI304), single acting 0-90 (air/spring return) Ø d1 Ø d2 H h L L (25.4) 25-40KH002S 3.50 (89) 1.97 (50) 8.07 (205) 6.89 (175) 3.15 (80) 1.97 (50) 1.50 (38.1) 25-40KH002S 3.50 (89) 1.97 (50) 8.07 (205) 6.89 (175) 3.15 (80) 1.97 (50) 2.00 (50.8) 50-63KH004S 4.09 (104) 1.97 (50) 8.07 (205) 6.89 (175) 3.15 (80) 1.97 (50) 2.50 (63.5) 50-63KH004S 4.09 (104) 1.97 (50) 8.07 (205) 6.89 (175) 3.15 (80) 1.97 (50) 3.00 (76.2) 65-80KH006S 5.08 (129) 1.97 (50) (260) 9.06 (230) 3.15 (80) 2.76 (70) 4.00 (101.6) LKLA 5.24 (133) 2.76 (70) (308) 9.76 (248) 3.94 (100) 3.94 (100)
5 Vertical pneumatic actuator (AISI304), double acting 0-90 (air/air) with control unit TOP Ø D1 Ø D2 H h 1.00 (25.4) 25-40KH002D TOP 4.02 (102) 3.50 (89) (316) 4.37 (111) 1.50 (38.1) 25-40KH002D TOP 4.02 (102) 3.50 (89) (316) 4.37 (111) 2.00 (50.8) 50-63KH004D TOP 4.02 (102) 4.09 (104) (316) 4.37 (111) 2.50 (63.5) 50-63KH004D TOP 4.02 (102) 4.09 (104) (316) 4.37 (111) 3.00 (76.2) 65-80KH006D TOP 4.02 (102) 5.08 (129) (371) 4.37 (111) 4.00 (101.6) KH006D TOP 4.02 (102) 5.08 (129) (371) 4.37 (111) Vertical pneumatic actuator (AISI304), single acting 0-90 (air/spring return) with control unit TOP Ø D1 Ø D2 H h 1.00 (25.4) 25-40KH002S TOP 4.02 (102) 3.50 (89) (316) 4.37 (111) 1.50 (38.1) 25-40KH002S TOP 4.02 (102) 3.50 (89) (316) 4.37 (111) ASi or DeviceNet upon request 2.00 (50.8) 50-63KH004S TOP 4.02 (102) 4.09 (104) (316) 4.37 (111) 2.50 (63.5) 50-63KH004S TOP 4.02 (102) 4.09 (104) (316) 4.37 (111) 3.00 (76.2) 65-80KH006S TOP 4.02 (102) 5.08 (129) (371) 4.37 (111) 4.00 (101.6) LKLA TOP 5.51 (140) 5.24 (133) (480) 6.73 (171) Set of gaskets for vertical pneumatic actuator 0-90 Used for actuator 1.00 (25.4) 25-40KH002DS double acting / single acting 1.50 (38.1) 25-40KH002DS double acting / single acting 2.00 (50.8) 50-63KH004DS double acting / single acting 2.50 (63.5) 50-63KH004DS double acting / single acting 3.00 (76.2) KH006DS double acting / single acting 4.00 (101.6) KH006DS double acting 4.00 (101.6) LKLASK single acting 40
6 Inductive proximity switch M12, plastic, for vertical pneumatic actuator 1.00 (25.4) M55B Inductive proximity switch M12, plastic, V AC for vertical pneumatic actuator 1.00 (25.4) M55C 1.50 (38.1) M55B 2.00 (50.8) M55B 2.50 (63.5) M55B 3.00 (76.2) M55B 4.00 (101.6) M55B Inductive proximity switch M12, metal, for vertical pneumatic actuator 1.00 (25.4) M55BSt 1.50 (38.1) M55BSt 2.00 (50.8) M55BSt 2.50 (63.5) M55BSt 3.00 (76.2) M55BSt 4.00 (101.6) M55BSt 1.50 (38.1) M55C 2.00 (50.8) M55C 2.50 (63.5) M55C 3.00 (76.2) M55C 4.00 (101.6) M55C Inductive proximity switch M12, metal, 8.2V DC for vertical pneumatic actuator, Ex 1.00 (25.4) M55ExSt 1.50 (38.1) M55ExSt 2.00 (50.8) M55ExSt 2.50 (63.5) M55ExSt 3.00 (76.2) M55ExSt 4.00 (101.6) M55ExSt 3/2 Solenoid valve with cable plug, for vertical pneumatic actuator 1.00 (25.4) 25-63MVB24D G 1/ MVB110A 25-63MVB230A 1.50 (38.1) 25-63MVB24D G 1/ MVB110A 25-63MVB230A 2.00 (50.8) 25-63MVB24D G 1/ MVB110A 25-63MVB230A 2.50 (63.5) 25-63MVB24D G 1/ MVB110A 25-63MVB230A 3.00 (76.2) MVB24D MVB110A MVB230A 4.00 (101.6) MVB24D MVB110A MVB230A 41
7 Horizontal pneumatic actuator (aluminium housing), double acting 0-90 (air/air) L H 1.00 (25.4) 25-63KB (161) 5.94 (151) 1.50 (38.1) 25-63KB (161) 5.94 (151) 2.00 (50.8) 25-63KB (161) 5.94 (151) 2.50 (63.5) 25-63KB (161) 5.94 (151) 3.00 (76.2) 65-80KB (209) 6.61 (168) 4.00 (101.6) KB (209) 6.61 (168) 6.00 (152.4) 150KA (333) 7.36 (187) PTFE coated housing upon request Horizontal pneumatic actuator (aluminium housing), single acting 0-90 (air/spring return) L H 1.00 (25.4) 25KB (161) 5.94 (151) 1.50 (38.1) 38-51KB (161) 5.94 (151) 2.00 (50.8) 38-51KB (161) 5.94 (151) 2.50 (63.5) 63-76KB (161) 5.94 (151) 3.00 (76.2) 63-76KB (209) 6.61 (168) 4.00 (101.6) KB (209) 6.61 (168) PTFE coated housing upon request Horizontal pneumatic actuator (aluminium housing), double acting (air/air) L H 1.00 (25.4) 25-63KB (235) 5.94 (151) 1.50 (38.1) 25-63KB (235) 5.94 (151) 2.00 (50.8) 25-63KB (235) 5.94 (151) 2.50 (63.5) 25-63KB (235) 5.94 (151) 3.00 (76.2) 65-80KB (311) 6.61 (168) 4.00 (101.6) KB (311) 6.61 (168) 6.00 (152.4) 150KB (448) 8.31 (211) PTFE coated housing upon request Horizontal 3-position pneumatic actuator (aluminium housing), double acting (air/air) L H 1.00 (25.4) 25-63KB (344) 5.94 (151) 1.50 (38.1) 25-63KB (344) 5.94 (151) 2.00 (50.8) 25-63KB (344) 5.94 (151) 2.50 (63.5) 25-63KB (344) 5.94 (151) 3.00 (76.2) 65-80KB (434) 6.61 (168) 4.00 (101.6) KB (434) 6.61 (168) (152.4) 150KB (631) 8.31 (211) PTFE coated housing upon request
8 Inductive proximity switch (double sensor), for horizontal pneumatic actuator 1.00 (25.4) M (38.1) M (50.8) M (63.5) M (76.2) M (101.6) M (152.4) M55 Inductive proximity switch (double sensor), V AC for horizontal pneumatic actuator 1.00 (25.4) M55A 1.50 (38.1) M55A 2.00 (50.8) M55A 2.50 (63.5) M55A 3.00 (76.2) M55A 4.00 (101.6) M55A 6.00 (152.4) M55A Inductive proximity switch (double sensor), 8.2V DC for horizontal pneumatic actuator, Ex 1.00 (25.4) M55AT 1.50 (38.1) M55AT 2.00 (50.8) M55AT 2.50 (63.5) M55AT 3.00 (76.2) M55AT 4.00 (101.6) M55AT 6.00 (152.4) M55AT Target puck for horizontal pneumatic actuator, 0-90 (180 ) 1.00 (25.4) SN (38.1) SN (50.8) SN (63.5) SN (76.2) SN (101.6) SN (152.4) SN
9 5/2 Solenoid valve with cable plug for horizontal pneumatic actuator 1.00 (25.4) 1.50 (38.1) 2.00 (50.8) 2.50 (63.5) 3.00 (76.2) 4.00 (101.6) Control unit for horizontal 3-position pneumatic actuator 1.00 (25.4) 1.50 (38.1) Consists of: 2 x 5/2 solenoid valve 1 x mounting plate incl. complete tubing 2.00 (50.8) 2.50 (63.5) 3.00 (76.2) 4.00 (101.6) 44
10 Consists of: 2 x piston guiding ring 2 x guiding segment 1 x slip ring top 1 x slip ring bottom Set of wearing parts for horizontal pneumatic actuator 1.00 (25.4) 25-63W 1.50 (38.1) 25-63W 2.00 (50.8) 25-63W 2.50 (63.5) 25-63W 3.00 (76.2) W 4.00 (101.6) W O-ring set for horizontal pneumatic actuator Consists of: 2 x gasket for cap 2 x O-ring piston 2 x O-ring drive pinion 2 x O-ring adjusting screw 1 x O-ring inside end position adjustment 1.00 (25.4) 25-63OR 1.50 (38.1) 25-63OR 2.00 (50.8) 25-63OR 2.50 (63.5) 25-63OR 3.00 (76.2) OR 4.00 (101.6) OR Electro-pneumatic positioner for horizontal pneumatic actuator, 4-20mA / 1.00 (25.4) SBE 1.50 (38.1) SBE 2.00 (50.8) SBE 2.50 (63.5) SBE 3.00 (76.2) SBE 4.00 (101.6) SBE 6.00 (152.4) 150SBE Heated bearing cap (water/steam) F * 1.00 (25.4) 25SD505H G 1/ (38.1) 38-40SD505H R 1/ (50.8) 50-51SD505H R 1/ (63.5) 63S505H R 1/ (76.2) 65-76SD505H R 1/ (101.6) SD505H R 1/ (152.4) * according DIN EN D505H upon request R 1/2 45
LAUFER VALVE TECHNOLOGY
2017 LAUFER VALVE TECHNOLOGY Hygienic Shutter Valves & Pigging Systems General Information 1 LAUFER Free Flow Shutter Valves (Arc Valves) 2 2-way 3-way LAUFER Pig Diverter Shutter Valves 3 3-way Customized
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
BALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Angle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
PF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
Ball Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
Guth modulating valves. The sophisticated solution
Guth modulating valves The sophisticated solution VSR-modulating valves with diaphragm actuator Modulating valves are used in process technology to control process parameters such as temperature, pressure
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PE PD C D E F Kg
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
pneumatic actuators
www.prisma.es pneumatic actuators GRA 201610 MECÁNICA S.L PRISMA The company 1 Certifications 2 ALUMINIUM PNEUMATIC ACTUATORS Technical features 3 PA range 5 P range 6 Disassembly and materials 7 PAW-PA30
485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Section G Series 77 High Purity Ball Valve Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries www.toplineonline.com
Spare Parts MH Koltek Valve SP70735-GB
Spare Parts MH Koltek Valve SP70735-GB5 2000-05 Koltek Valve type MH, MHI and MHE Bearing and lid for bearing 2 Double shutter Reg.: 2000-05 Intro.: 9605 Koltek Valve type MH, MHI and MHE Type MH 25 mm
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
The Cleanest Design. SRC Sanitary Remote-Controlled Valve PD US
The Cleanest Design SRC Sanitary Remote-Controlled Valve PD 60019 US8 2001-10 Application SRC is an air-operated seat valve with a sanitary and flexible design giving a wide field of application, e.g.
3/2-Way Valve DN 15 up to DN 50
/-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated
BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
Globe Control Valves. Steady, safe and economic
Globe Control Valves Steady, safe and economic Exner valves have proven themselves in the field of process engineering for over 50 years. As early as the sixties, Exner developed the first globe control
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
Knife gate valve HG - Standard
Knife gate valve HG - Standard V R Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve HG Stafsjö s knife gate valve HG has excellent flow
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
BIDIRECTIONAL WAFER Knife Gate Valve
09/03/2016 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
PNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTIC The 771 XS wafer ball valve is dedicated to the automatic shut-off of low and medium pressure industrial fluids lines up to 16 bar. The
kyproven Performance Alfa Laval i-bfv Automatic or Manual Butterfly Valve
. kyproven Performance Alfa Laval i-bfv Automatic or Manual Butterfly Valve Application Alfa Laval i-bfv is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe
Spare Parts. SPC-2 Sanitary Electro-Pneumatic Modulating Valve SP70736-GB
Spare Parts SPC-2 Sanitary Electro-Pneumatic Modulating Valve SP70736-GB5 2002-11 Type SPC-2 (Samson actuator, beige colour) 2 Parts for FEP seal Reg.: 9805 Intro.: 9708 Type SPC-2 (Samson actuator, beige
ARC-SB Aseptic Remote Controlled Valve with Steel Bellows
ARC-SB Aseptic Remote Controlled Valve with Steel Bellows ARC-SB is an air-operated valve which is available as a shut-off or divert valve for aseptic installations. The special design and selected material
Diaphragm : Plastic Metal Globe : Plastic Metal Manifold Pinch Valve
Diaphragm : Plastic...................... 156 Metal...................... 158 Globe : Plastic...................... 160 Metal...................... 164 Manifold..................... 170 Pinch Valve.......................
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
PF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
Valve Technology DIN EN Butterfly Valves
Armaturenwerk Hötensleben GmbH Valve Technology DIN EN 14432 Butterfly Valves A member of NEUMO Ehrenberg Group Edition 3.0 Proven Valves for all Purpose ATEX Directive 2014/34/EU Armaturenwerk Hötensleben
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR
715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTICS The 715 XS isolating valve is a two pieces ball valve for industrial applications with all compatible fluids. The body and the trim are full
Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
TopControl Continuous
860 Electropneumatic positioner for pneumatically actuated control valves Type 860 can be combined with... Type 7 Type 70 Types 70/7/7K Type 800 Piston-controlled globe valve Piston-controlled angle seat
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1200AD/E 01 2004 SINGLE SEAT TWO WAYS PED 97/23/CE Art.3 Section 3 TYPE 1200 AD Normally open Air closes DESCRIPTION The 1200 HYGIENIC pneumatic control valves are with
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
Economy Air Operated Brass Ball Valve
Type: PA1101E Type: PA1111E Type: PA1121E Pneumatic actuator direct mounted Actuator fitted via mounting kit Actuator fitted via TSM stem extension Pneumatic Actuator features: Rack and pinion construction
ROUND BY SQUARE PORT KNIFE GATE VALVE
ROUND BY SQUARE PORT KNIFE GATE VALVE The model knife gate is a wafer valve designed for handling difficult applications. This valve is suitable for using in recycling applications, like junk or sand traps
L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
short name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum
with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/
3-port valves. pneumatically actuated
3-port valves pneumatically actuated Pneumatically actuated valves for quality and accuracy in fluid control The Spirax Sarco range of QL valves and pneumatic actuators are designed to give a comprehensive
Butterfly valve with ADA pneumatic actuator
1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes
3/2-Way Valve DN 15 up to DN 50
/-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated
The Original Seat Valve
.1 The Original Seat Valve SRC Sanitary Remote-Controlled Valve Application SRC is an air-operated seat valve in a sanitary and flexible design giving a wide field of application, e.g. as a stop valve
Tandem valve, welded valve configuration
Tandem valve, welded valve configuration Fully integrated in Bürkert s Process Control Systems Quality certifications Type 2034 can be combined with... Type 6012 Solenoid banjo valve Stroke limitation
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Pneumatic actuators Edition:
Datasheet Pneumatic actuators Edition: 202-0 A - DA A - SC A - SO Double acting actuator Single acting actuator (spring to close) Single acting actuator (spring to open) Compact design Patented backlash-free
kysimply Unique Diaphragm Valves
. kysimply Unique Diaphragm Valves Unique DV-ST UltraPure Application Alfa Laval Unique diaphragm valves offer a complete range covering every need, for use in sterile and ultra-hygienic processes. The
Angle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
Pressure switches hex 24
Pressure switches Normally open or normally closed, maximum voltage 42 V Low-cost solution for mechanical pressure monitoring. Stable switching point even after long use and high load. Switching point
DA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle
Evans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg
B C D BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B AD AS AD C D F Kg AS C
Angle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
Pneumatic Actuators. Series 79P (Aluminum) Series 79P (Glass-filled Polyamide) Series 79P (316 Stainless Steel)
Series 79P (Aluminum) Pneumatic Actuators Specifications Series 79 P: Type: Double Piston, Double Rack and Pinion Bodies: Aluminum, Glass-filled Polyamide, and 316 ss Torque: 59 to 40,710 in-lbs. s Air-to-Air
BSM Series Pneumatic & Hydraulic Actuator Systems for Valves and Dampers
BSM Series Pneumatic & Hydraulic Actuator Systems for Valves and Dampers WORLDWIDE AUTOMATION SOLUTIONS The Fast-Track Manufacturer for Actuators & Controls Introduction BSM Actuators & Controls BSM Actuators
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
2 way ball valve M1 with pneumatic actuator
Praher Plastics Austria GmbH DB/EN/DEEN/14/03/335 Subject to change without prior notice!! General: Valve body: Sealing material: Ball seating joint: Dimensions: PVC-U EPDM / FPM PTFE DN10 DN50 d16 d63
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
UNIDIRECTIONAL Knife Gate Valve
12/04/2016 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve. Mechanically welded body. Various seat and packing materials available. Face to face dimension in accordance with standard, it
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
ARITA. ARITA Scotch Yoke Pneumatic Rotary Actuator. Position Indicator. NAMUR Drive Shaft (Hexagon or Double flat)
ARITA Position Indicator - The Top Direction - A. Position Indicator B. Limit Switch Box C. Proximity Sensor D. E/P Positioner E. Position Transmitter F. Manual Lever -Flat -Dome NAMUR Drive Shaft (Hexagon
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
Family of Products 1100 SERIES 1500 SERIES. 3 Piece Full Port Fire Safe Ball Valve ANSI Class WOG
Family of Products 3210 S. Susan St, Santa Ana, CA 92704 Tel (714) 427-0877 Fax (714) 427-6392 www.avcovalve.com 1100 SERIES 3 Piece Full Port Fire Safe, PCTFE, PEEK, 1500 SERIES 3 Piece Full Port Fire
Air Operated 2 Way FIP VKD ABS Ball Valve
Type: PA3112F Actuator fitted via EasyFit-F mounting kit Pneumatic Actuator features: Rack and pinion construction Hard anodised extruded aluminium body Epoxy coated cast aluminium end caps Pre-tensioned
BALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
PROCESS EQUIPMENT COMPANY. Manufactured by: Group Defontaine Saint Herblain Cedex, France.
PROCESS EQUIPMENT COMPANY Manufactured by: Group Defontaine Saint Herblain Cedex, France www.toplineonline.com Summary Shut Off and Divert Valves Body Designs, Characteristics...1 Performance Curves, Dimensions...2-3
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
PNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
Model J Doc: J3/3740/01 Jan 2008
Model J3-3740 Doc: J3/3740/01 Jan 2008 Full bore double union ball valve with PTFE seats and EPDM seals (Viton/ FPM option), fitted via stainless steel mounting kit with J3 electric actuator. Supplied
UNIDIRECTIONAL Knife Gate Valve
UNIDIRECTIONAL Knife Gate Valve 24/04/2013 Unidirectional knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop. Various seat
ISO 5211-Compliant Actuators for Swagelok Ball Valves
www.swagelok.com ISO 5211-Compliant s for Swagelok Ball s 40G, 40, 60, and 83 ; and AFS Ball s Pneumatic rack and pinion actuators s meet industry standards for interface: ISO 5211, NAMUR, and VDI/VDE
ARC Aseptic Remote-Controlled Valve with PTFE Diaphragm
ARC Aseptic Remote-Controlled Valve with PTFE Diaphragm PD 65143 GB5 21-1 Application ARC is an aseptic seat valve with PTFE diaphragm. It is available as a stop- or change-over valve. The valve is suited
WAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
Low Pressure Series KL
Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006